Competence from passion. Pneumatic tools and accessories. For trades and businesses.
Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact wrenches Impact sockets Impact wrench GP 0706 With powerful vane motor and twin hammer mechanism, this tool ensures high and immense power. Precision high-performance bearings and the shockproof composite housing guarantee maximum service life. 420.004 Impact wrench GP 0780 Professional 1/2" impact wrench with non-slip, coldinsulated handle and onehand reversing, especially suitable for construction and automotive workshops. 420.006 Impact wrench GP 1948 3/4" With twin hammer mechanism for very high and immense power. Very light, high-quality composite housing. Optimised downwards air exhaust, ergonomic handle and easy-access controls. 420.010 Impact socket PT 0243 K05 1/2" Square socket wrench made from chromiummolybdenum (Cr-Mo) steel for the professional, with antiscratch coating for aluminium rims, 7 parts in plastic case. 420.032 Impact socket PT 0243 K01 1/2" Square socket wrench made from CrMo steel for the professional, with antiscratch coating for aluminium rims, 3 parts in plastic case. 420.034 Impact socket PT 02428 K1 1/2" Square socket wrench made from CrMo steel for the professional, 12 parts in plastic case. 420.036 Device oiler for pneumatic tools. 420.104 Impact wrench GP 0770 3/4" Professional impact wrench with outstanding power/ weight ratio, twin hammer mechanism and short length for easy access to tight spots. 420.014 Square drive Operating Max. Holder Size (length) WAF GP 0706 1/2 470 880 1150 368 10 000 2 GP 0780 1/2 515 540 170 7000 2.7 GP 1948 3/4 271 1.627 1898 198 5.500 3.3 GP 0770 3/4 1350 1500 480 5700 4 PT 0243 K01 1/2 85 17, 19, 21 PT 0243 K05 1/2 85 17, 19, 21, 23, 24, 27 PT 02428 K1 1/2 85 10, 11, 13, 14, 17, 19, 21, 23, 24, Extension 125 mm (1/2")
Ratchet wrenches Drill Holder Operating Multi-functional ratchet wrench GP 0799 Robust composite housing. With direct inserts of 8, 10, 12, 13 and 14 mm and 1/4" and 3/8" adapters for standard socket wrenches. Ratchet head designed for working in the most confined spaces and long service life. 420.018 Ratchet wrench GP 0761 B Professional ratchet wrench with high, clockwise/ anticlockwise direction changeover and practical housing with non-slip handle. 420.020 Max. GP 0799 1/4 + 3/8 41 41 85 450 0.6 GP 0761 B 1/2 80 88 170 160 1.2 Chuck air consumption GP 0659 B 10 113 1800 1.4 Chisel hammers Drill GP 0659 B Composite quick-change chuck with planetary gearing and needle bearings. Non-slip drive switch and smooth-running clockwise/ anticlockwise changeover switch. 420.030 Chisel hammer GP 0314 HK1 Non-slip, cold-insulated handle with safety switch and automatic stop. Set of five chisels made from CrMo steel in case, chisel length 250 mm, with retaining spring and inline oiler. 420.048 Screwdrivers Screwdriver GP 0973 Composite housing for easy handling and with stepless speed control. Comfortable rotary switch for clockwise/ anticlockwise operation and quick-change coupling for screwdriver bits. Soft grip with non-slip, cold-insulated handle for frequent use. 420.042 Screwdriver GP 0907 B Stepless speed control, quickchange coupling for bits, non-slip handle, clockwise/ anticlockwise direction changeover switch, downwards air exhaust and short length. 420.044 Chisel hammer GP 0109 NHB Medium-heavy demolition hammer for wall-breaking and demolition of bricks and concrete, with retaining spring and two high-quality chisels made from CrMo steel, chisel length 250 mm. 420.052 Chisel hammer GP 0120 H Heavy demolition hammer for demolition of bricks, concrete and natural stone. With two highquality chisels made from CrMo steel, chisel length 260 mm. 420.054 Needle deruster attachment G 100 H Perfect for rust removal and cleaning, suitable for chisel hammer GP 0314 HK1. Holder 10.2 mm. 420.092 Holder [bit] Operating Max. GP 0973 6 mm 1.1 10.2 10 113 1800 1.2 GP 0907 B 6 mm 5 13 13 113 1800 1.1 Hexagonal holder Number of blows Stroke height GP 0314 HK1 10.2 3000 66.7 157 1.8 GP 0109 NHB 12.8 3600 50.0 350 2.8 GP 0120 H 14.7 2400 51.0 600 5.9
Saws Angle grinder Pneumatic saw GP 0824 Universal saw for bodywork and sheet metal, for reliable cutting power in sheet metal up to 1.5 mm. 420.060 Angle grinder GP 0519 Compact, powerful, with high grinding capacity (speed 10 000 rpm). For roughing and cutting discs. M 14 spindle holder for standard grinding discs. 420.090 Cutting power in steel/ aluminium Stroke rate Stroke height air consumption Disc diameter Rated power [kw] GP 0824 1.5 9000 10 162 0.7 GP 0519 AXF 2 125 10 000 0.68 170 1.8 Random orbit and axial grinders Blind rivet / setting tool Random orbit sander GP 0498 A With 150 mm Velcro sanding disc with 6 holes and an oscillating circle of 9.5 mm for large surface transfer. Integrated stepless power control and safety switch with automatic stop. 420.072 Random orbit sander GP 0413 DC Compact and agile, with oscillating circle of 5 mm and extraction system with suction hose for large surface transfer. 420.078 Axial grinder GP 0546SW High speed of 25 000 rpm, with standard collet for 6 mm grinding pins, ideal for the finest grinding work. Optimised air exhaust, very low vibration. 420.080 Axial grinder GP 0511 PW1 With standard collets for 6 mm and 3 mm grinding pins, supplied in case with 10 grinding stones for deburring, grinding and milling. 420.082 Blind rivet setting tool GP 0810 X With collector vessels, four bits (2.4, 3.2, 4.0 and 4.8 mm). Traction force 850 kg. Suitable for blind and pop rivets only. 420.098 Stroke length Traction force Putty / silicone gun / grease gun GP 0810 X 16 850 113 1.5 Putty / silicone gun GP 0835 C Steel cartridge gun for standard 310 ml cartridges. 420.100 Grease gun GP 0843 K Universal grease gun for standard 400 g DIN cartridges or direct filling. 420.102 Sanding disc diameter Oscillating circle GP 0498 A 150 9.5 12 000 170 1 GP 0413 DC 150 5.0 10 000 390 1.13 GP 0546 SW 25 000 120 0.49 GP 0511 PW1 22 000 150 0.51 Capacity [ml] Cartridge [ml] GP 0835 C 310 0.8/stroke 1.6 GP 0843 K 450 400 80 1.5
Quality maintenance equipment Check, inflate, measure and deflate with AIRKO tyre inflators. Professional manual tyre inflators Professional blow guns Professional manual tyre inflator 25GR-80 CEE Professional inflator with highquality calibrated 80 mm WIKA precision gauge giving exact readings from 0 to 12 bar and oil-resistant rubber protection for gauge and handle. Convenient singlelever function for checking, inflating and deflating. 425.018 Professional manual tyre inflator 25G-60 Tyre inflator with high-quality gauge (with fluctuation protection), protective cap, single-lever operation for checking, inflating and deflating. 425.022 Professional blow gun AP/3AR For professional use, with special blow-out nozzle design for a high degree of noise reduction. Order no. 425.036 Blow gun AP/AR For professional use, with special blow-out nozzle design for a high degree of noise reduction (< 78 db(a)). 425.038 Blow gun AP/3G For professional use, removable rubber surround for nozzle tip makes it particularly suitable for sensitive surfaces. 425.040 Tyre inflator 25D-RB Tyre inflator with ergonomic cold-insulated handle, gauge with protective cap and three functions: inflate, measure, deflate. 425.024 Universal inflating set Brass nozzle for bicycle valve, ball hollow needle, brass blow-out nozzle and nozzle for inflatable boats etc. 425.075 Blow gun AP/AN For professional use, with special blow-out nozzle design to provide air barrier for safe use. 425.042 Blow gun AP/V For professional use, with special venturi blow-out nozzle design providing around 100 % more air volume. 425.044 Plug Maximum Pressure gauge diameter Display range Air requirement Maximum Connection Professional manual tyre Lever valve 12 80 0 12 inflator 25GR 80 CEE, calibrated Professional manual tyre Lever valve 10 60 0 10 inflator 25G 60 Tyre inflator 25D RB Lever valve 10 60 0 10 Blow gun AP/3AR 380 10 1/4 Blow gun AP/AR 300 10 1/4 Blow gun AP/3G 380 10 1/4 Blow gun AP/AN 220 10 1/4 Blow gun AP/V 220 10 1/4
Pneumatic accessories EURO standard coupling with brass valve body, onehanded operation and max. flow capacity of 1500 l/min. Blow-out pin AIRKO blow-out pin Handy 'pocket-sized' blow-out pin always to hand when you need it. 424.182 Coupling with female thread 1/4 426.076 Coupling with female thread 3/8 426.078 Coupling with female thread 1/2 426.074 Coupling with male thread 1/4 400.952 Coupling with male thread 3/8 400.954 Coupling with male thread 1/2 400.950 Coupling ST 6 mm 426.080 Coupling ST 8 mm 426.082 Coupling ST 9 mm 426.084 Coupling ST 10 mm 426.086 Coupling ST 13 mm 426.088 Air requirement Maximum Connection AIRKO blow-out pin 220 12 1/4 Premium industrial coupling with ultra-flow steel valve body and max. flow capacity of 2800 l/min. Spray gun Spray gun with metal receiver featuring bayonet lock, adjustable air volume and adjustable spray nozzle. 425.078 Professional steel coupling, female thread 1/2" 426.096 Professional steel coupling, female thread 1/4" 426.098 Professional steel coupling, female thread 3/8" 426.100 Professional steel coupling, male thread 1/2" 400.956 Professional steel coupling, male thread 1/4" 400.958 Professional steel coupling, male thread 3/8" 400.960 Safety vent coupling. Safety standard ISO 4414, max. flow capacity of 2000 l/min. Air requirement Maximum Connection 1 2 3 4 5 6 Spray gun 100 10 1/4 Illustration Professional sand-blasting gun Professional sand-blasting gun with metal receiver Professional sand-blasting gun with metal receiver and 6 mm nozzle. 425.058 Air requirement Maximum Connection 350 7 1/4 Vent coupling KE, female thread 1/4" 426.110 Vent coupling KE, female thread 3/8" 1 426.112 Vent coupling KE, female thread 1/2" 426.114 Vent coupling KE, male thread 1/4" 426.118 Vent coupling KE, male thread 3/8" 2 426.106 Vent coupling KE, male thread 1/2" 426.108 Vent coupling KE ST 9 mm 3 426.116 Plug-in nipple, female thread 1/8 426.162 Plug-in nipple, female thread 1/4 4 426.160 Plug-in nipple, female thread 3/8 426.164 Plug-in nipple, female thread 1/2 426.158 Plug-in nipple, male thread 1/8 426.156 Plug-in nipple, male thread 1/4 5 426.150 Plug-in nipple, male thread 3/8 426.152 Plug-in nipple, male thread 1/2 426.154 Plug-in nozzle 6 mm 426.170 Plug-in nozzle 8 mm 426.172 Plug-in nozzle 9 mm 6 426.174 Plug-in nozzle 10 mm 426.166 Plug-in nozzle 13 mm 426.168
Pneumatic accessories Small things make a big difference: With their functional and practical design, AIRKO accessories are an integral part of the comprehensive AIRKO system. Hose lines Hose lines PVC compressed air hose Transparent with fabric inlay, maximum 10 bar. PU hose coil With swivel joint and bend protection, maximum 15 bar. Diameter Diameter 50 m (roll) 12 x 6 447.306 10 m (complete*) 12 x 6 447.324 20 m (complete*) 12 x 6 447.328 50 m (roll) 14 x 8 447.302 10 m (complete*) 14 x 8 447.332 20 m (complete*) 14 x 8 447.336 50 m (roll) 16 x 10 447.304 50 m (roll) 19 x 13 447.300 Rubber hose set Oil-resistant with fabric inlay, maximum 20 bar. 12 m (complete*) 9.5 x 6.5 447.362 15 m (complete*) 12 x 8 447.360 Hose reel With 20 m PVC hose, 14.5 x 10, transparent with fabric inlay, maximum 15 bar, order no. 447.364 Diameter 10 m (complete*) 14 x 6 447.316 20 m (complete*) 14 x 6 447.320 10 m (complete*) 19 x 10 447.340 20 m (complete*) 19 x 10 447.344 50 m (roll) 19 x 10 447.308 Automatic hose retractor With reinforced 15 m PU hose, 12 x 8, oil-resistant, maximum 20 bar, order no. 447.366 Rubber hose set Oil-resistant with fabric inlay, maximum 20 bar. Automatic hose retractor With reinforced 30 m PU hose, 13 x 9.5, oil-resistant, maximum 20 bar, order no. 447.368 Diameter 50 m (roll) 21 x 13 447.310 50 m (roll) 25 x 16 447.312 50 m (roll) 29 x 19 447.314 * including Euro standard coupling and plug-in nipple * including Euro standard coupling and plug-in nipple
Plenty to choose from AIRKO offers an extensive range of pneumatic accessories. We will be more than happy to provide you with detailed information. Pneumatic accessories Pneumatic accessories Hose tail fitting with male thread 3/8, 1/2 6 13 mm Reduction nipple 1/8 to 1/2 Ball valve with female thread 1/4, 3/8, 1/2 and female thread/male thread 1/2 Reduction 1/4 to 3/4 2-way/3-way distributor Female thread 3/8 and 1/2 Distributor block T-piece with male thread 1/4, 3/8, 1/2 Hose connector Y = 6 10 mm GS= 4 10 mm T= 6 10 mm Sleeve with hexagon head thread 1/8, to 1/2 Hose connector 6 13 mm Ball valve thread 1/8 to thread 3 Hose clamp 8 20 mm Hose clips 5 23 mm Condensate drain valve Thread 1/8 to 1/2 Double nipple Reducing double nipple 1/8, 1/4, 3/8, 1/2 Oil for piston compressor Oil for compressed air oiler Paraffin oil Special compressor oil for frost temperatures 0311/ 450.231 GB