Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs have become a key piece of equipment for mining and tunneling applications. As part of our commitment to continuous improvement, the face drilling rig has benefitted from a comprehensive upgrade, focusing on improved safety, increased robustness, battery power, automated functions and lower operational costs. Main benefits Cleaner work environment thanks to battery drive and no diesel emissions Onboard charging enables the machine to charge during drilling High productivity thanks to large battery capacity 2
The battery is easily lifted from the top and thanks to its low position it s not affecting the visibility from the cabine. The robust and reliable BUT 36 booms gives Boomer M2 Battery the same excellent multi capabilities as the diesel version. Thanks to the large onboard battery, Boomer M2 Battery is able to perform long tramming distances between each face. Upgrades on the feed gives significant improvements in reliability The new rock drill COP MD20 has 10% more percussion power, 60% longer service intervalls and class leading hose life ROPS and FOPS certified cabin for added safety (optional) Onbard charging possibilities means no need to stop the machine for charging The upgraded heavy-duty BUT 36S boom is optimized for tough conditions Stronger axle for better durability Filtration package designed to protect the key assets on the drill rig (optional) Fully electrical driveline without diesel emissions 3
The good just got better There are always ways to improve and evolve equipment design. When contemplating what to focus on with the Boomer M-series upgrade, we utilized customer-focused workshops, site visits and feedback from operators and service technicians to identify what equipment areas should be enhanced. + The future is electric We are leading the change towards sustainability in mining through battery electric, zero-emission equipment. The result is a safer and healthier underground working environment. This contributes to a sustainable future and a smaller environmental footprint. It is a power change that changes everything. + COP MD20 is more productive and more robust The new generation of rock drills are more durable than ever, with improved penetration rate, drill steel economy, up to 30% less RDT consumption, less vibrations, higher hydraulic efficiency, up to 15% faster penetration rate than closest competitor and a recommended service interval of 1 000 impact hours. This means more uptime, increased productivity and lower running cost. + Safe bolting boom function The Boomer M-series is unique in the mining and construction world because it offers a safe bolting boom function for the semi-mechanized installation of rock bolts. Thanks to the design of the BUT 36S booms and the side platforms on both sides of the operator station, it is possible to swing the feed all the way back to a position where the operator can safely load bolts into the feed without having to pass in front of the machine in areas with an unsupported roof. A comprehensive service offering Even the best equipment needs to be serviced regularly to make sure it sustains peak performance. An Epiroc service solution offers peace of mind, maximizing availability and performance throughout the lifetime of your equipment. We focus on safety, productivity and reliability. By combining genuine parts and an Epiroc service from our certified technicians, we safeguard your productivity wherever you are. 4
Technical specifications = Standard = Option Drilling system COP 1638HD+ COP 1838HD+ COP 2238HD+ COP MD20 Hole blowing kit Water mist flushing, external water and air supply* Rock drill lubrication warning kit Lubrication air filtration system *Not in combination with COP 3038 Boom BUT 35 SL BUT 36 ST Automatic boom lubrication Control system Epiroc Rig Control System (RCS 5) Advanced Boom Control (ABC) Pure Advanced Boom Control (ABC) Regular Advanced Boom Control (ABC) Total Measure While Drilling (MWD) Underground Manager PRO (PC software) Underground Manager MWD (PC software) for analysis of drill data Bolt view Two operator panels (for standing operation only) Rig acces control Rig Remote Access (RRA), LAN or WLAN connection Total station navigation Dynamic Tunneling Package (DTP) Feed BMH 6000-Series 12 ft, 14 ft, 16 ft, 18 ft Telescopic feed BMHT 6000-series (max 18 ft) Extension drilling set BSH 110 (BMH feeds only) Rod Adding System, RAS (BMH feeds only)* Water spraying kit on cradle *Max 14 ft feed Electrical drilling system Total installed power 188 kw, main motors 2*90 kw Sf 1.25 Voltage 575 V 60 Hz Starting method soft start Transformer 8 kva Electronic overload protection for electric motors Voltmeter/amperage meter in electric cabinet Percussion hour meter on operator display Air/water system Hydraulically driven screw compressor Atlas Copco GA 5 Hydraulically driven screw compressor Atlas Copco GA 30* Hydraulic water booster pump, max capacity at 15 bar boost 200 l/min. Minimum water inlet, 2 bar at 200 l/min** Phase sequence and eart fault indicator Cable reel, diameter 1 600 mm PC4 or PC5 plug Battery charger Dual controls for cable reel Water hose reel *Might require a larger electrical motor **Depending on selected rock drill Stainless steel electrical enclosure *Depending on selected rock drill Hydraulic system Battery Low oil level indicator Model: 88.5 kwh, LiFePO4, 630 VDC Oil temperature gauge on oil tank, electronically supervised Filtration 16 μm Oil filter indicator Extra filtration package for water- and fine particle removal Battery charger Brand/model: Artisan 65 kw master service, input 575 VAC Mineral hydraulic oil Electrical oil filling pump Heater kit for hydraulic oil tank, diesel engine and electric motors Ni-Cr plated piston rods (limitations exist) Biodegradable hydraulic oil 5
Technical specifications = Standard = Option Carrier and electrical driveline Drifter rods Electric motor 127 kw/403 Nm continuously Rock drill Rod Min. hole diameter (mm) Battery 88.5 kwh COP 1838 SR35-H35-T38 Speedrod 38 32 000 series transmission COP 2238 SR35-H35-T38 38 Articulated steering ±41 steering angle* COP MD20 SR35-R39-T38 45 Four-wheel drive Electric system 24 V Batteries 2x125 Ah Extension rods for injection drilling/ras Hose/cable guiding at water/cable reel Rock drill Rod Min. hole diameter (mm) Dana 113 (short) axles COP 1838 Rnd 32 Speedrod 54 Automatic differential lock on axles, limited slip Tires 12.00 x R24 COP 2238 COP MD20 Rnd 39 Speedrod 64 Clearance outside axles 13º rear, 22º front Tramming lights 6x40 W LED, 2x70 W, 24 V DC Working lights 4x35 W HID, 24 V DC Shank adapters Illuminated stairs LED Rock drill Rod Min. hole diameter (mm) Central lubrication system R38 38 Fire suppression system ANSUL (Manual, checkfire or automatic) COP 1838 T38 38 Fire suppression system FORREX (Automatic) COP 2238 COP MD20 R32* 38 Rig washing kit T38 38 Manual lubrication kit *Intended for RAS and extension drilling with BSH 110 Boot washing kit Hydraulic Swellex pump type H1 for manual installation Hydraulic outlet for charging with Mini SSE Couplings *If RHS E or SP2 service platform is equipped the steering angle will be reduced to 30 Rock drill Rod Diameter (mm) Length (mm) Cabin (optional) ROPS and FOPS approved cabin, noise level <80 db(a) Mounting height -140/+250 mm COP MD20 T38 TBA TBA Low profile cabin -150 mm Air conditioning unit Noise and vibration 12 V outlet for communication radio Operator sound pressure level in canopy, drilling, free field (ISO 11201) Electrical heater, 1.2 kw, 230 V (CE) Operator sound pressure level in cabin, drilling, free field (ISO Reversing camera with monitor 11201) Heating function for air conditioning (water transferred) Operator sound pressure level working close to machine, Fixed seat drilling, free field Swingable seat for drilling and tramming Sound power level (ISO 3744), drilling, free field Vibration levels seated, drilling (ISO 2631-1) cabin Cabin body made of stainless steel Vibration levels standing, drilling (ISO 2631-1) cabin Joystick-controlled spotlights left and/or right, 70 W Front window, 24 mm Media player COP 1838 COP 2238 R38 55 170 T38 55 170 104±6 db(a) re 20uPa 75±3 db(a) re 20uPa 104±6 db(a) re 20uPa 128 db(a) re 1pW* 0.07±0.07 m/s^2 0.07±0.07 m/s^2 Protective roof Mounting height -80 mm/+310 mm Manual spotlight, left and/or right Two operator panels (for standing operation only) Swingable seat for drilling and tramming (one operator panel only) 6
BATTERY Technical specifications Dimensions in millimeters 1 440 L feed BMH 154 A H 2 387 2 213 M2 11º 21º 571 205 2 016 262 2 170 796 244 3 156 4 186 932 Ltot Boomer M-series equipped with COP 1838. Height H std H -140 H +250 H protective roof H protective roof lowered 12.00 R24 3 031 2 891 3 281 2 995 2 300 Feed Ltot BMH 6812 13 915 BMH 6814 14 510 BMH 6816 15 120 One boom rig 1 600 7 178 7 483 Two boom rig 200 9 655 10 068 Boomer M-series, coverage area. Dimensions Width (excluding jacks) Ground clearence Turning radius outer/inner 2 300 mm 260 mm 7 200/4 400 mm Tramming speed On flat ground (rolling resistance 0.05) 15 km/h On incline 1:8 5 km/h Gross weight (depending on configuration) Rig type Total Boom side Engine side Two boom rig 29 000 kg 19 000 kg 10 000 kg 7
9869 0079 01a 2018-09 Örebro, Sweden. Legal Notice Copyright 2018, Epiroc Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com