www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuator CAH- Benefits odular Robust Reliable High speed and/or high load All metal design Picture CAH-3-LS3-D1-1
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuators CAH- Connecting diagrams D1-12 V DC D2-24 V DC 12/24 V DC + 12/24 V DC + Red Red 1 2 3 4 5 6 7 8 L - Connecting diagrams A4-3x4 V AC 3x4 V AC L1 L2 L3 3x4 V AC L1 L2 L3 1 2 3 4 5 6 7 8 3 3 L - Connecting diagrams A2-23 V AC 23 V AC L 23 V AC L 1~ 1~ 1 2 3 4 5 6 7 8 L -
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- CAH- Dimensional drawing otor D1 12 V DC D2 24 V DC otor A4 3x4 V AC otor A2 23 V AC Side view 78 72,5 127 9 72,5 122 9 72,5 48 1 H8 3 165 196 12 +,9 +,4 152 19 199 161 87 12 (1) Stroke + 186 Retracted length = stroke + 23 (15) Stroke Stroke + 255 Side view Side view Option 1 Brake : 71 1 Option 1 Brake : 1 Free wheel brake on push load 128,6226 2 Free wheel brake on pull load 128,2 3 Friction brake for push and pull load 77 19 74 56 152 19 Top view 25 3 2 1 H11 16 13 18 PG 11 clamp range 2 x 1,5 mm 2 x 5 mm PG 11 clamp range 4-1 4-1 18 127 Option 1 Brake: Option 1 Brake: Option 1 Brake: Dimensional drawing Top view L Limit Switch 73
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Performance diagram Safety factor load conditions D1-12 V DC D2-24 V DC Stroke (mm) 8 8 8 7 7 7 S = 1,5 F 5 5 5 4 4 4 3 3 3 2 2 2 S = 4 1 1 1 1 2 3 4 1 2 3 4 1 2 3 4 5 6 Load (k) S = Safety factor A4-3x4 V AC A2-23 V AC CAH 1-L CAH 3-L CAH 3-LS CAH 5-LS 5 5 4 4 3 3 2 2 1 1 1 2 3 4 5 5 1 1 5 2 2 5 3 Technical data CAH-1- LXXX-D1 CAH-3- LXXX-D1 CAH-3- LSXXX-D1 LSXXX-D1 otor D1 D1 D1 D1 Voltage V DC 12 12 12 12 Screw type L L LS LS Rated push load 1 2 5) 3 3) 4 2) Rated pull load 1 2 3 4 Speed (at full load) mm/s 5 17 8 5 Stroke mm 1 to 7 1 to 7 1 to 7 1 to 7 Retracted length mm S+23 S+23 S+23 S+23 Power consumption W 192 168 168 168 Current consumption A 16 14 14 14 Duty cycle % 1 (1/9) 1 (1/9) 1 (1/9) 1 (1/9) Ambient temperature C -1 to +4-1 to +4-1 to +4-1 to +4 Type of protection IP 44 44 44 44 Weight (at 2 mm stroke) kg 5 5 5 5 1) Push load allowed up to 35 mm stroke (if S>35 mm, only pull load is allowed) 2) Push load allowed up to 4 mm stroke (if S>4 mm, only pull load is allowed) 3) Push load allowed up to 45 mm stroke (if S>45 mm, only pull load is allowed) 4) Push load allowed up to 5 mm stroke (if S>5 mm, only pull load is allowed) 5) Push load allowed up to mm stroke (if S> mm, only pull load is allowed) 6) Push load allowed up to 65 mm stroke (if S>65 mm, only pull load is allowed)
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuators Technical data CAH-1- LXXX-D2 CAH-3- LXXX-D2 CAH-3- LSXXX-D2 LSXXX-D2 otor D2 D2 D2 D2 Voltage V DC 24 24 24 24 Screw type L L LS LS Rated push load 1 2 5) 3 3) 4 2) Rated pull load 1 2 3 4 Speed (at full load) mm/s 45 18 8 5 Stroke mm 1 to 7 1 to 7 1 to 7 1 to 7 Retracted length mm S+23 S+23 S+23 S+23 Power consumption W 192 144 168 168 Current consumption A 8 6 7 7 Duty cycle % 1 (1/9) 1 (1/9) 1 (1/9) 1 (1/9) Ambient temperature C -1 to +4-1 to +4-1 to +4-1 to +4 Type of protection IP 44 44 44 44 Weight (at 2 mm stroke) kg 5 5 5 5 CAH-1- LXXX-A4 CAH-3- LXXX-A4 LXXX-A4 LSXXX-A4 otor A4 A4 A4 A4 Voltage V AC 3x4 3x4 3x4 3x4 Screw type L L L LS Rated push load 1 2 5 4) 3 2 3) 4 5 1) Rated pull load 1 2 5 3 2 4 5 Speed (at full load) mm/s 5 15 1 5 Stroke mm 1 to 7 1 to 7 1 to 7 1 to 7 Retracted length mm S+23 S+23 S+23 S+23 Power consumption W 21 2 2 28 Current consumption A,5,6,6,6 Duty cycle % 4 (4/6) 4 (4/6) 4 (4/6) 4 (4/6) Ambient temperature C -1 to +4-1 to +4-1 to +4-1 to +4 Type of protection IP 54 54 54 54 Weight (at 2 mm stroke) kg 5,6 5,6 5,6 5,6 CAH-1- LXXX-A2 CAH-3- LXXX-A2 LXXX-A2 LSXXX-A2 otor A2 A2 A2 A2 Voltage V AC 23 23 23 23 Screw type L L L LS Rated push load 5 1 1 5 6) 2 4) Rated pull load 5 1 1 5 2 Speed (at full load) mm/s 5 18 1 5 Stroke mm 1 to 7 1 to 7 1 to 7 1 to 7 Retracted length mm S+23 S+23 S+23 S+23 Power consumption W 23 2 2 23 Current consumption A 1,1 1 1 1,1 Duty cycle % 25 (2,5/7,5) 25 (2,5/7,5) 25 (2,5/7,5) 25 (2,5/7,5) Ambient temperature C -1 to +4-1 to +4-1 to +4-1 to +4 Type of protection IP 54 54 54 54 Weight (at 2 mm stroke) kg 5,5 5,5 5,5 5,5 1) Push load allowed up to 35 mm stroke (if S>35 mm, only pull load is allowed) 2) Push load allowed up to 4 mm stroke (if S>4 mm, only pull load is allowed) 3) Push load allowed up to 45 mm stroke (if S>45 mm, only pull load is allowed) 4) Push load allowed up to 5 mm stroke (if S>5 mm, only pull load is allowed) 5) Push load allowed up to mm stroke (if S> mm, only pull load is allowed) 6) Push load allowed up to 65 mm stroke (if S>65 mm, only pull load is allowed)
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuators CAH- Ordering key Performance and self locking table Load [] / Full Load Speed [mm/s] Screw otor 3 / 8 ot self-locking 4 / 5 Self-locking L S D2 24 V DC 1 / 45 ot self-locking 2 / 18 ot self-locking L D2 24 V DC 3 / 8 ot self-locking 4 / 5 Self-locking L S D1 12 V DC 1 / 5 ot self-locking 2 / 17 ot self-locking L D1 12 V DC 2 / 5 Self-locking L S A2 23 V AC 5 / 5 ot self-locking 1 / 18 ot self-locking 1 5 / 1 Self-locking L A2 23 V AC 4 5 / 5 Self-locking L S A4 3x4 V AC 1 / 5 ot self-locking 2 5 / 15 ot self-locking 3 2 / 1 Self-locking L A4 3x4 V AC 1 3 5 Type Size (Gear Center Distance) 5 mm 3 1 Gear Ratio 1 1 3 3 5 5 Screw Type Lead screw 12.5x6 L S Lead screw 12.5x12.5 L C A H 3 1 L Stroke 1 mm 1 2 mm 2 3 mm 3 4 mm 4 5 mm 5 mm 6 7 mm 7 otor 12 V DC D 1 24 V DC D 2 3x4 V AC A 4 23 V AC A 2 Front Attachment o option = Standard trough hole D=1mm H8 Option 1 - Brake o option Free wheel brake on push load 128,6226 1 1 Free wheel brake on pull load 128,2 2 2 Friction brake for push and pull load 3 Option 2 o option L Customer option SKF is a registered trademark of the SKF Group. SKF Group 215 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB T/P8 1576 E October 215 skf.com