Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Unit Max. delivery head H max 9.5 m Max. volume flow Q max 36 m 3 /h Optimal delivery head H opt 6.0 m Optimum volume flow Q opt 16 m 3 /h Pressure connection DN 65 Pump curves in accordance with ISO 9906, Appendix A Flange (in accordance with EN 1092-2) PN 10 Maximum operating pressure p max 1.10 bar Free ball passage Operating mode (immersed) Operating mode (non-immersed) Max. immersion depth 44 mm S1 S2-8 min S3-25% Protection class IP 68 Fluid temperature T +3... +35 C Weight approx. m 22 kg Motor data Mains connection 1~230 V, 50 Hz Nominal current I N 6.90 A Nominal motor power P 2 1.10 kw Power consumption P 1 1.50 kw Power factor Activation type cos φ 0.99 Direct Nominal speed n 2850 rpm No. of poles 2 Insulation class F Recommended switching frequency 20 1/h Max. switching frequency 40 1/h Permitted voltage tolerance ±10 % Cable Length of connecting cable Cable type OZOFLEX (PLUS) 07RNF Cable cross-section 4G1 mm 2 Type of connecting cable Mains plug Detachable Equipment/function Float switch Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 1 / 7
Data sheet: Wilo-Drain TP 65 F 91/11 (1~230 V) Motor protection WSK Explosion protection Materials Static seal Impeller Sealing on motor side Mechanical seal NBR PP-GF30 NBR SiC/SiC Motor housing 1.4301 Pump housing PUR Pump shaft 1.4404 Information for order placements Make Wilo Art no. 4007085 EAN number 4016322308430 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 2 / 7
Dimensions and dimension drawings: Wilo-Drain TP 65 F 91/11 (1~230 V) Dimension drawing Wilo-Drain TP 65: 3~/1,1 kw, 3~/1,5 kw TP 65... / 1~ TP 65... -A / 1~ 150 80 150 80 TP 65... -A / 3~ 110 80 PG 13 PG 11 PG 13 1 m 255 PG 16-21 PG 11 > 325 148 54 200 145 DN65 Ø 26.9x2.0 Ø19 Ø 145 DN 65 PN 10/16 505 4 x M16 308 378 115 193 Ø 320 Ø 300 300 160 >85 65 93 238 32 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 3 / 7
Dimensions and dimension drawings: Wilo-Drain TP 65 F 91/11 (1~230 V) Dimension drawing Wilo-Drain TP 65: 1~/1,5 kw, 3~/2,2 kw TP 65... / 1~ TP 65... -A / 1~ 150 80 150 80 TP 65... -A / 3~ 110 80 PG 13 PG 11 PG 13 1 m 255 PG 16-21 PG 11 > 325 148 54 200 145 DN65 Ø 26.9x2.0 Ø19 Ø 145 DN 65 PN 10/16 532 4 x M16 308 405 115 193 Ø 320 Ø 300 300 160 >85 65 93 238 32 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 4 / 7
Pump curves: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump curves Wilo-Drain TP 65 F - 50 Hz - 2900 rpm Pump curves in accordance with ISO 9906, Appendix A Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 5 / 7
Specification texts: Wilo-Drain TP 65 F 91/11 (1~230 V) Fully submersible sewage pump as monobloc unit for the vertical wet well installation for pumping contaminated water. Hydraulics housing and impeller made of plastic, motor housing made of stainless steel. Pressure connection with horizontal pressure port and flange connection. Glanded motor in singleand three-phase versions with thermal motor monitoring and 10-metre detachable connection cable with bare cable end. A version with float switch and shock-proof or CEE plug. All three-phase units without float switch as standard with Ex protection. Unit Pressure connection: DN 65 Flange (in accordance with EN 1092-2): 10 Maximum operating pressure: 1.10 bar Free ball passage: 44 mm Operating mode (immersed): S1 Operating mode (non-immersed): S2-8 min / S3-25% Max. immersion depth: Protection class: IP 68 Fluid temperature: +3... +35 C Weight approx.: 22 kg Motor data Mains connection: 1~230 V, 50 Hz Nominal current: 6.90 A Nominal motor power: 1.10 kw Power consumption: 1.50 kw Power factor: 0.99 Activation type: Direct Nominal speed: 2850 rpm No. of poles: 2 Insulation class: F Max. switching frequency: 40 1/h Permitted voltage tolerance: ±10 % Cable Length of connecting cable: Cable type: OZOFLEX (PLUS) 07RNF Cable cross-section: 4G1 mm 2 Type of connecting cable: Detachable Mains plug: Materials Static seal: NBR Impeller: PP-GF30 Sealing on motor side: NBR Mechanical seal: SiC/SiC Motor housing: 1.4301 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 6 / 7
Specification texts: Wilo-Drain TP 65 F 91/11 (1~230 V) Pump housing: PUR Pump shaft: 1.4404 Equipment/function Float switch: Motor leakage detection: Sealing chamber leakage detection: Leakage chamber leakage detection: Motor protection: WSK Explosion protection: Information for order placements Art no.: 4007085 EAN number: 4016322308430 Ready for delivery: Stock Price group: W6 Make: Wilo Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-06 7 / 7