PCN042 Transint Voltag Supprssors and S Prottors Produt sription Th PCN042/4/44/45/46 family of transint voltag supprssor arrays provid a vry high lvl of prottion for snsitiv ltroni omponnts that may sujtd to ltrostati disharg (S). Th PCN042/4/44/45/46 dvis safly dissipat S striks, xding th IC 61000 4 2 Intrnational Standard, vl 4 ( 8kV ontat disharg). ll pins ar ratd to withstand 20 kv S pulss using th IC 61000 4 2 ontat disharg mthod. Using th MI ST 88 (Mthod 015) spifiation for Human Body Modl (HBM) S, all pins ar prottd from ontat dishargs of gratr than 0 kv. SOT2 CS 18 http://onsmi.om SOT2 5 CS 527H SOT2 6 CS 527J Faturs Two, Thr, Four, Fiv, or Six Transint Voltag Supprssors Compat SMT Pakag Savs Board Spa and Failitats ayout in Spa Critial ppliations In Systm S Prottion to 20 kv Contat isharg, pr th IC 61000 4 2 Intrnational Standard Ths vis ar P Fr and ar RoHS Compliant SOT 14 CS 527F SC70 6 CS 419 SC70 CS 419B TSSOP8 CS 948 CS70 5 CS 419C MSOP8 CS 846B ppliations S Prottion of PC Ports, Inluding USB Ports, Srial Ports, Paralll Ports, I194 Ports, oking Ports, Propritary Ports, t. Prottion of Intrfa Ports or IC Pins whih ar xposd to High S vls MRKING IGRM 1 XXX M XXX = Spifi vi Cod M = at Cod = P Fr Pakag (Not: Mirodot may in ithr loation) ORRING INFORMTION (s th last pag of this doumnt) Smiondutor Componnts Industris, C, 2011 Otor, 2011 Rv. 5 1 Puliation Ordr Numr: PCN042/
PCN042 PCN042 CTRIC SCHMTIC PCN04 4 PCN044T 8 7 6 5 1 2 SOT2 SC70 1 2 SOT 14 1 2 4 TSSOP 8 PCN044Y 5 4 PCN045 6 5 4 PCN046 8 7 6 5 1 2 SOT2 5 SC70 5 1 2 SOT2 6 SC70 6 1 2 4 MSOP 8 PCKG / PINOUT IGRMS Top Viw Top Viw Top Viw 1 1 1 4 2 052 2 52 05 2 Pin SOT2 Pin SC70 4 Pin SOT 14 Top Viw 1 5 2 054 4 5 Pin SOT2 Top Viw 1 5 2 54 4 5 Pin SC70 Top Viw 1 2 PC 8 7 N054T 6 4 5 8 Pin TSSOP Top Viw Top Viw Top Viw 1 6 2 055 5 4 6 Pin SOT2 1 6 55/56 2 5 4 6 Pin SC70 1 8 2 7 056 6 4 5 8 Pin MSOP Not: SOT2, SC70, SOT 14, TSSOP, and MSOP Pakags may diffr in siz. Ths drawings ar not to sal. http://onsmi.om 2
PCN042 Tal 1. PIN SCRIPTIONS Pins Nam sription (Rfr to Pakag Outlin rawings) Th athod of th rsptiv diod, whih should onntd to th nod rquiring transint voltag prottion. (Rfr to Pakag Outlin rawings) Th anod of th diods. SPCIFICTIONS Tal 2. BSOUT MXIMUM RTINGS Paramtr Rating Units Storag Tmpratur Rang 65 to +150 C Pakag Powr issipation SC70 SOT2, SOT2 5, SOT2 6, SOT 14 TSSOP, MSOP Strsss xding Maximum Ratings may damag th dvi. Maximum Ratings ar strss ratings only. Funtional opration aov th Rommndd Oprating Conditions is not implid. xtndd xposur to strsss aov th Rommndd Oprating Conditions may afft dvi rliaility. Tal. STNR OPRTING CONITIONS 0.2 0.225 0.5 Paramtr Rating Units Oprating Tmpratur 40 to +85 C W Tal 4. CTRIC OPRTING CHRCTRISTICS Symol Paramtr Conditions Min Typ Max Units C Capaitan T = 25 C, 2.5 VC, 1 MHz 0 pf V RSO Rvrs Stand off Voltag I R = 10, T = 25 C 5.5 V I R = 1 m, T = 25 C 6.1 V I K akag Currnt V IN = 5.0 VC, T = 25 C 1 100 n V SIG Small Signal Clamp Voltag Positiv Clamp Ngativ Clamp I = 10 m, T = 25 C I = 10 m, T = 25 C 6.2 0.4 6.8 0.8 8 1.2 V V S R S Withstand Voltag Human Body Modl, MI ST 88, Mthod 015 Contat isharg pr IC 61000 4 2 Standard iod ynami Rsistan Forward Condution Rvrs Condution (Not 1) (Not 1) 1. S voltag applid twn hannl pins & ground, on pin at a tim; all othr hannl pins opn; all pins groundd. 0 20 1.0 1.4 kv http://onsmi.om
PCN042 PRFORMNC INFORMTION iod Capaitan Typial diod apaitan with rspt to positiv athod voltag (rvrs voltag aross th diod) is givn in iod Capaitan vs. Rvrs Voltag. Figur 1. iod Capaitan vs. Rvrs Voltag Typial High Currnt iod Charatristis Masurmnts ar mad in puls mod with a nominal puls width of 0.7 ms. Figur 2. Typial Input VI Charatristis (Puls mod masurmnts, puls width = 0.7 ms nominal) http://onsmi.om 4
PCN042 PCKG IMNSIONS SOT 2 (TO 26) CS 18 08 ISSU P 1 1 2 H S VIW C 1 0.25 NOTS: 1. IMNSIONING N TORNCING PR NSI Y14.5M, 1982. 2. CONTROING IMNSION: INCH.. MXIMUM THICKNSS INCUS FINISH THICKNSS. MINIMUM THICKNSS IS TH MINIMUM THICKNSS OF BS MTRI. 4. IMNSIONS N O NOT INCU MO FSH, PROTRUSIONS, OR GT BURRS. MIIMTRS INCHS IM MIN NOM MX MIN NOM MX 0.89 1.00 1.11 0.05 0.040 0.044 1 0.01 0.06 0.10 0.001 0.002 0.004 0.7 0.44 0.50 0.015 0.018 0.020 0.09 0.1 0.18 0.00 0.005 0.007 2.80 2.90.04 0.110 0.114 0.120 1.20 1.0 1.40 0.047 0.051 0.055 1.78 1.90 2.04 0.070 0.075 0.081 0.10 0.20 0.0 0.004 0.008 0.012 1 0.5 0.54 0.69 0.014 0.021 0.029 H 2.10 2.40 2.64 0.08 0.094 0.104 0 10 0 10 VIW C 0.95 0.07 SORING FOOTPRINT 0.95 0.07 2.0 0.079 0.9 0.05 0.8 0.01 SC 10:1 mm inhs http://onsmi.om 5
PCN042 PCKG IMNSIONS SOT 2, 5 ad CS 527H 01 ISSU O SYMBO MIN NOM MX 0.90 1.45 1 0.00 0.15 2 0.90 1.15 1.0 0.0 0.50 1 0.08 0.22 2.90 BSC 2.80 BSC 1 1.60 BSC 0.95 BSC 0.0 0.45 0.60 PIN #1 INTIFICTION TOP VIW 1 2 0.60 RF 0.25 RF θ 0 4 8 θ1 5 10 15 θ2 5 10 15 θ1 2 θ θ2 1 1 2 SI VIW N VIW Nots: (1) ll dimnsions in millimtrs. ngls in dgrs. (2) Complis with JC standard MO-178. http://onsmi.om 6
PCN042 PCKG IMNSIONS SOT 2, 6 ad CS 527J 01 ISSU 6 5 4 1 2 TOP VIW B 6X 0.20 M 2 C S B S TI 2 GG PN STING PN NOTS: 1. IMNSIONING N TORNCING PR SM Y14.5M, 1994. 2. CONTROING IMNSION: MIIMTRS.. TUM C IS TH STING PN. MIIMTRS IM MIN MX --- 1.45 1 0.00 0.15 2 0.90 1.0 0.20 0.50 0.08 0.26 2.70.00 2.50.10 1 1.0 1.80 0.95 BSC 0.20 0.60 2 0.25 BSC 6X 0.10 C 1 SI VIW C STING PN TI N VIW RCOMMN SORING FOOTPRINT*.0 6X 0.85 6X 0.56 0.95 PITCH IMNSIONS: MIIMTRS *For additional information on our P Fr stratgy and soldring dtails, plas download th ON Smiondutor Soldring and Mounting Thniqus Rfrn Manual, SORRM/. http://onsmi.om 7
PCN042 PCKG IMNSIONS SOT 14, 4 ad CS 527F 01 ISSU SYMBO MIN NOM MX 1 2 0.80 0.05 0.75 0.90 1.22 0.15 1.07 0.0 0.50 4 2 0.76 0.89 0.08 0.20 1 2.80 2.10 2.90.04 2.64 1 1.20 1.0 1.40 1 2 1 1.92 BSC 0.20 BSC 1 1 0.40 0.50 0.54 RF 0.60 2 0.25 TOP VIW θ 0 8 2 2 2 1 1 SI VIW N VIW Nots: (1) ll dimnsions ar in millimtrs. ngls in dgrs. (2) Complis with JC TO-25. http://onsmi.om 8
PCN042 PCKG IMNSIONS SC 70, ad, 1.25x2 CS 419B 01 ISSU O SYMBO MIN NOM MX 0.80 1.10 1 0.00 0.10 2 0.80 0.90 1.00 0.15 0.0 0.08 0.22 1 1.80 2.00 2.20 1.80 2.10 2.40 1 1.15 1.25 1.5 0.65 BSC 1 0.26 0.6 0.42 RF 0.46 TOP VIW 2 0.15 BSC θ 0º 8º θ1 4º 10º 1 2 1 1 1 2 SI VIW N VIW Nots: (1) ll dimnsions ar in millimtrs. ngls in dgrs. (2) Complis with JC MO-20. http://onsmi.om 9
PCN042 PCKG IMNSIONS SC 88 (SC 70 5 ad), 1.25x2 CS 419C 01 ISSU SYMBO MIN NOM MX 0.80 1.10 1 0.00 0.10 2 0.80 1.00 0.15 0.0 0.10 0.18 1 1.80 1.80 2.00 2.10 2.20 2.40 1 1.15 1.25 1.5 0.65 BSC 0.26 0.6 0.46 1 0.42 RF TOP VIW 2 0.15 BSC θ 0º 8º θ1 4º 10º 1 2 1 1 1 2 SI VIW N VIW Nots: (1) ll dimnsions ar in millimtrs. ngls in dgrs. (2) Complis with JC MO-20. http://onsmi.om 10
PCN042 PCKG IMNSIONS SC 88 (SC 70 6 ad), 1.25x2 CS 419 01 ISSU SYMBO MIN NOM MX 0.80 1.10 1 0.00 0.10 2 0.80 1.00 0.15 0.0 0.10 0.18 1 1.80 1.80 2.00 2.10 2.20 2.40 1 1.15 1.25 1.5 0.65 BSC 0.26 0.6 0.46 1 0.42 RF TOP VIW 2 0.15 BSC θ 0º 8º θ1 4º 10º 1 2 1 1 1 2 SI VIW N VIW Nots: (1) ll dimnsions ar in millimtrs. ngls in dgrs. (2) Complis with JC MO-20. http://onsmi.om 11
PCN042 PCKG IMNSIONS TSSOP8, 4.4x CS 948 01 ISSU O T 19 C 2008 SYMBO MIN NOM MX 1.20 1 0.05 0.15 2 0.80 0.90 1.05 0.19 0.0 1 0.09 0.20 2.90.00.10 6.0 6.40 6.50 1 4.0 4.40 4.50 0.65 BSC 1.00 RF 1 θ 0.50 0.60 0.75 0º 8º TOP VIW 2 1 SI VIW 1 1 N VIW Nots: (1) ll dimnsions ar in millimtrs. ngls in dgrs. (2) Complis with JC MO-15. http://onsmi.om 12
PCN042 PCKG IMNSIONS MSOP8 CS 846B 01 ISSU O H NOTS: 1. IMNSIONING N TORNCING PR NSI Y14.5M, 1982. 2. CONTROING IMNSION: MIIMTR.. IMNSION OS NOT INCU MO FSH, PROTRUSIONS OR GT BURRS. MO FSH, PROTRUSIONS OR GT BURRS SH NOT XC 0.15 (0.006) PR SI. 4. IMNSION B OS NOT INCU INTR FSH OR PROTRUSION. INTR FSH OR PROTRUSION SH NOT XC 0.25 (0.010) PR SI. 5. 846-01 OBSOT, NW STNR 846-02. PIN 1 I T STING PN 0.08 (0.0015) 8 P 0.08 (0.00) M T B S S 1 MIIMTRS INCHS IM MIN NOM MX MIN NOM MX 1.10 0.04 1 0.05 0.08 0.15 0.002 0.00 0.006 0.25 0. 0.40 0.010 0.01 0.016 0.1 0.18 0.2 0.005 0.007 0.009 2.90.00.10 0.114 0.118 0.122 2.90.00.10 0.114 0.118 0.122 0.65 BSC 0.026 BSC 0.40 0.55 0.70 0.016 0.021 0.028 H 4.75 4.90 5.05 0.187 0.19 0.199 1.04 8X 0.041 SORING FOOTPRINT* 0.8 0.015 8X.20 0.126 4.24 0.167 5.28 0.208 0.65 6X 0.0256 SC 8:1 mm inhs *For additional information on our P Fr stratgy and soldring dtails, plas download th ON Smiondutor Soldring and Mounting Thniqus Rfrn Manual, SORRM/. http://onsmi.om 1
PCN042 ORRING INFORMTION vi Pakag Shipping ORRING INFORMTION (ont d) vi Pakag Shipping PCN042YR SOT2 (P Fr) 000/Tap & Rl PCN044YB5R SC70 5 (P Fr) 000/Tap & Rl PCN044Y5R SOT2 5 (P Fr) 000/Tap & Rl PCN045YB6R SC70 6 (P Fr) 000/Tap & Rl PCN045Y6R SOT2 6 (P Fr) 000/Tap & Rl PCN045YB6R R SC70 6 (P Fr) 000/Tap & Rl PCN04Y4R SOT 14 (P Fr) 000/Tap & Rl PCN044TR TSSOP8 (P Fr) 2500/Tap & Rl PCN042YBR SC70 (P Fr) 000/Tap & Rl PCN046MR MSOP8 (P Fr) 4000/Tap & Rl ON Smiondutor and ar rgistrd tradmarks of Smiondutor Componnts Industris, C (SCIC). SCIC rsrvs th right to mak hangs without furthr noti to any produts hrin. SCIC maks no warranty, rprsntation or guarant rgarding th suitaility of its produts for any partiular purpos, nor dos SCIC assum any liaility arising out of th appliation or us of any produt or iruit, and spifially dislaims any and all liaility, inluding without limitation spial, onsquntial or inidntal damags. Typial paramtrs whih may providd in SCIC data shts and/or spifiations an and do vary in diffrnt appliations and atual prforman may vary ovr tim. ll oprating paramtrs, inluding Typials must validatd for ah ustomr appliation y ustomr s thnial xprts. SCIC dos not onvy any lins undr its patnt rights nor th rights of othrs. SCIC produts ar not dsignd, intndd, or authorizd for us as omponnts in systms intndd for surgial implant into th ody, or othr appliations intndd to support or sustain lif, or for any othr appliation in whih th failur of th SCIC produt ould rat a situation whr prsonal injury or dath may our. Should Buyr purhas or us SCIC produts for any suh unintndd or unauthorizd appliation, Buyr shall indmnify and hold SCIC and its offirs, mploys, susidiaris, affiliats, and distriutors harmlss against all laims, osts, damags, and xpnss, and rasonal attorny fs arising out of, dirtly or indirtly, any laim of prsonal injury or dath assoiatd with suh unintndd or unauthorizd us, vn if suh laim allgs that SCIC was nglignt rgarding th dsign or manufatur of th part. SCIC is an qual Opportunity/ffirmativ tion mployr. This litratur is sujt to all applial opyright laws and is not for rsal in any mannr. PUBICTION ORRING INFORMTION ITRTUR FUFIMNT: itratur istriution Cntr for ON Smiondutor P.O. Box 516, nvr, Colorado 80217 US Phon: 0 675 2175 or 800 44 860 Toll Fr US/Canada Fax: 0 675 2176 or 800 44 867 Toll Fr US/Canada mail: ordrlit@onsmi.om N. mrian Thnial Support: 800 282 9855 Toll Fr US/Canada urop, Middl ast and fria Thnial Support: Phon: 421 790 2910 Japan Customr Fous Cntr Phon: 81 5817 1050 http://onsmi.om 14 ON Smiondutor Wsit: www.onsmi.om Ordr itratur: http://www.onsmi.om/ordrlit For additional information, plas ontat your loal Sals Rprsntativ PCN042/