Associate of Applied Science in Electro-Mechanical Engineering Technology To Bachelor of Science in Mechatronics Engineering Technology Completion of the following curriculum will satisfy the requirements for the Associate of Applied Science in Electro-Mechanical Engineering Technology degree at Cincinnati State and leads to the Bachelor of Science in Mechatronics Engineering Technology degree at Northern Kentucky University. Degree requirement for Cincinnati State: 1) completion of the required curriculum and 2) minimum cumulative GPA 2.0. Admission Requirements for NKU: Students completing the Associate of Applied Science degree in Electro-Mechanical Engineering with a GPA of 2.0 or higher will be admitted into the Mechatronics Engineering Technology major at NKU. Students in the 2NKU program should work closely with their advisors when choosing courses. This document serves as a guide, but does not replace academic advising. When choosing Cincinnati State courses, student may also consult the Associate of Arts advising brochure or the catalog for A and B list courses in Arts and Humanities or Social and Behavioral Sciences.
CINCINNATI STATE AAS IN ELECTRO-MECHANICAL ENGINEERING TECHNOLOGY TO NKU BS IN MECHATRONICS ENGINEERING TECHNOLOGY Cincinnati State Category I: Transfer Module Core Courses and AAS Degree Requirements Common to the EMET, EMETE and EMETL Programs Course Course or Category Credits NKU Course FYE 1 First Year Experience Elective 1 UNV 100T ENG 101 English Composition I ENG 101 ENG 102 or ENG 104 English Composition 2 Elective ENG 102 PHI 110 Ethics PHI 200 MAT 125&126 or MAT 251&252 Algebra and Trigonometry & Functions and Calculus or Calculus I & Calculus II 8-10 MAT 119/100T or MAT 229/100G PHY 151 or Physics 1: Algebra and Trigonometry-Based or PHY 211 or 4-5 PHY 201 Physics 1: Calculus-Based PHY 220 CIT 105 OSHA 10 General Industry Safety 1 EET 11 Circuit Analysis 1 4 EGT 161 EET 12 Circuit Analysis 2 4 EGT 24 EMET 150 Introduction to Controls and Robotics 2 EMET 180 Process Instrumentation EMET 240 Programmable Logic Controllers, Motors, Motor Controls, and Kinematics or EGT 20 + EMET 180 + EMET 240 = EGT 86 + EGT 00T EMET 180 + EMET 240 = EGT 86 + EGT 00T MET 150 Statics and Strength of Materials for MET EGT 00 PSET 110 Power Systems Computer Aided Drafting EGT 200T Choose 2: EMET 291* EMET 292* EET 121 EET 251 MET 140 Full-time Cooperative Education 1 Full-time Cooperative Education 2 Digital Systems 1 Electronics Engineering Materials Subtotal General Education Core 49-55 *EMET 291 and EMET 292 can satisfy EGT 01 with permission of the NKU advisor. 4-7 CEP 00 CEP 00 EGT 245 EGT 44 EGT 261
Students must choose one of the following programs: Electro-Mechanical Engineering Technology (EMET), Electro-Mechanical Engineering Technology Alternative Energy Major (EMETE) or Electro- Mechanical Engineering Technology Laser Major (EMETL) Category II: Additional Requirements for the Electro-Mechanical Engineering Technology Program (EMET) Course Course or Category Credits NKU Course MET 111 Manufacturing Processes 1 EGT 265 EMET 245 Laser 1 EGT 29 EMET 270 Robotics and Servomechanisms 4 EMET 275 Electric Drive Mechanisms 4 Subtotal Additional Program Credit Hours 14 Total Associate Degree Credit Hours 6-69 EGT 20 + Category II: Additional Requirements for the Electro-Mechanical Engineering Technology Alternative Energy Major Program (EMETE) Course Course or Category Credits NKU Course MET 111 Manufacturing Processes 1 EGT 265 EMET 210 Energy Efficiency and Audits EGT 210 EMET 225 Solar and Renewable Energy EGT 25 EMET 245 Laser 1 EGT 29 EMET 275 Electric Drive Mechanisms 4 Subtotal Additional Program Credit Hours 16 Total Associate Degree Credit Hours 65-71 Note: PSET 140 is required for the BS in Mechatronics Engineering Technology Alternative Energy Track. Students who do not complete PSET 140 before transferring to NKU will be required to take that course at Cincinnati State while at NKU. Category II: Additional Requirements for the Electro-Mechanical Engineering Technology Laser Major Program (EMETL) Course Course or Category Credits NKU Course EMET 245 Laser 1 EGT 29 EMET 246 Laser 2 4 EGT 95 EMET 270 Robotics and Servomechanisms 4 EGT 20 + EMET 275 Electric Drive Mechanisms 4 EGT 294 Subtotal Additional Program Credit Hours 15 Total Associate Degree Credit Hours 64-70
Northern Kentucky University In the column labeled an indicates that the course is required for the AAS in all programs. An indicates that the course is required in at least one of the programs or can be selected as part of the AAS degree before matriculating to NKU. Category III: Additional General Education Requirements NKU Course Course Credits Course CMST 101 Public Speaking COMM 110 STA 205 Introduction to Statistical Methods MAT 11 CHE 10/10L Chemistry for Engineering Technology 4 TBS Culture and Creativity 6 GCP 100G Cultural Pluralism CULT 105 TBS Individual and Society 6 Subtotal Additional General Education Credit Hours 25 Category IV: Core Requirements for the BS in Mechatronics Engineering Technology NKU Course Course Credits Course EGT 161 D.C. Circuit Analysis EET11 EGT 212 Computer-Aided Drafting and Design EGT 24 A.C. Circuit Analysis EET 12 EGT 245 Digital Electronics EET 121 EGT 261 Engineering Materials MET 140 EGT 265 Manufacturing Processes and Metrology MET 111 EGT 267 Programming for Engineering Applications EGT 00 Statics and Strength of Materials MET 150 EGT 01* Cooperative Education in Engineering EMET 291 Technology EMET 292 EGT 10 Project Management and Problem Solving EGT 17 Introduction to Capstone Project in EGT 1 EGT 40 Applied Dynamics EGT 61 Fluid Power MET 240 EGT 67 Microprocessors EET 220 EGT 408 Mechatronics Topics EGT 417 Senior Design in Technology 2 EGT 448 Network Hardware EGT 480 Machine Design MAT 119 Precalculus Mathematics MAT 125 & MAT 126 CHE 10/10L Chemistry for Engineering Technology 4 MAT 128 & MAT Calculus A & 4-6 227 or MAT 129 Calculus B or MAT 251 & MAT 252
Calculus I STA 205 Introduction to Statistical Methods MAT 11 PHY 211 General Physics I 5 PHY 151 or PHY 201 PHY 21 General Physics II 5 PHY 152 or PHY 202 Subtotal Core Courses Credit Hours (excluding general education credits from Category III) 45-47 *EMET 291 and EMET 292 can satisfy EGT 01 with permission of the NKU advisor. Students must choose one of the following tracks: Automated Systems Track, Alternative Energy Track, Laser Technology Track or Computer Science Track Category V: Requirements for the Automated Systems Track NKU Course Course Credits Course EGT 20 EGT 65 EGT 86 Robotic Systems and Material Handling CNC & Manufacturing Process Planning Electromechanical Instrumentation and Control EGT 20 + EMET 180 + EMET 240 = EGT 86 + EGT 00T EGT 465 Automated Manufacturing Systems Need 1 course Select 9 elective credit hours of EGT courses at NKU and/or EMET courses 9 EMET 245 () EMET 275 (4) at Additional Track Credit Hours** 9 Total Bachelor Degree Credit Hours** 142-148 **Credits hours for the tracks and bachelor degree can vary based on the courses taken at. The total credit hours for this track is based on the student completing an AAS in EMET at.
Category V: Requirements for the Alternative Energy Track NKU Course Course Credits Course EGT 140) ) EGT 210) EGT 25) Power Systems Foundations PSET 140 Introduction to Controls and Robotics 2 EMET 150 Energy Efficiency and Audits EMET 210 Solar and Renewable Energy EMET 225 EGT 450 Thermodynamics and Heat Transfer MET 260 Select 9 elective credit hours of EGT courses at NKU and/or EMET courses at 9 EMET 180 () EMET 240 () EMET 245 () Additional Track Credits** 6 Total Bachelor Degree Credit Hours** 141-147 **Credits hours for the tracks and bachelor degree can vary based on the courses taken at. The total credit hours for this track is based on the student completing an AAS in EMETE at. Category V: Requirements for the Laser Technology Track NKU Course Course Credits Course ) EGT 29) EGT 95) EGT 294) Introduction to Controls and Robotics 2 EMET 150 Laser 1 EMET 245 Laser 2 4 EMET 246 Electric Drive Mechanisms 4 EMET 275 Select 9 elective credit hours of EGT courses at NKU and/or EMET courses at 9 EMET 180 () EMET 240 () EMET 270 (4) Additional Track Credits** 0 Total Bachelor Degree Credit Hours** 17-14 **Credits hours for the tracks and bachelor degree can vary based on the courses taken at. The total credit hours for this track is based on the student completing an AAS in EMETL at.
Category V: Requirements for the Computer Science Track NKU Course Course Credits Course CSC 260 Object Oriented Programming I IT 161 CSC 60 Object Oriented Programming II CSC 62 Computer Systems CSC 407 Concepts of Programming Languages CSC 462 Computer Architecture CIT 71 Unix Systems Select elective credit hours of EGT, INF, CIT or CSC at NKU and/or EMET EMET 240 () courses at Additional Track Credits** 18 Total Bachelor Degree Credit Hours** 151-157 **Credits hours for the tracks and bachelor degree can vary based on the courses taken at. The total credit hours for this track is based on the student completing an AAS in EMET at. Updated June 2018