AG0 ROTARY MOWER ARCHIVE BOOK By Serial Number / Production July January 00 (Current) (AG0 Model - 0" Rotary) COMPLETE PARTS LISTING Archive Book Part No. 070 ALAMO INDUSTRIAL 0 E. Walnut Seguin, Texas 7 00 Edition 0-7- An Alamo Group Company 00 Alamo Group Inc.
NOTES
ITEM INDEX - AG0 0" Rotary PAGE NO. INTRODUCTION AG0 Rotary Parts Section Introduction... A-FRAME Jul. Apr. 000... May 000 Current... BLADES & BLADE CARRIER Jul. Jan. 0... Feb. 0 Nov.... 7- Dec. Apr. 000... May 000 Current... 0 CASTER WHEELS Beams Jul. Aug. 000... 7 Sep. 000 Current... Forks & Wheels Jul. Current... CHAINGUARDS, FRONT Jul. Aug. 000... Sep. 000 Current)... CHAINGUARDS, REAR Jul. May... Jun. Aug. 000... 7 Sep. 000 Current... - CHECK CHAINS OPTION Jul. Aug. 000... Sep. 000 Current... DECALS Jul. Current...- DECK Jul. Apr. 000... May 000 Current... DEFLECTORS, FRONT Jul. Aug. 000... 0 Sep. 000 Current)... DEFLECTORS, REAR Jul. Aug. 000... Sep. 000 Current... DRIVELINE Jul. Feb.... Mar. Apr. 0... May. 0 Oct. 0... Nov. 0 Jun.... 7 Jul. Nov.... Dec. Current... Optional Cat... 0 Continued Next Page 00 Alamo Group Inc. INDEX -
INDEX - AG0 0" Rotary ITEM PAGE NO. Continued From Previous Page GEARBOX Jul. Jan. 0... - Feb. 0 Dec.... - Jan. Nov.... -7 Dec. Current... - GEARBOX SHIELDS Jul. Jan. 0... 0 Feb. 0 Nov.... Dec. Current... OFFSET HITCH OPTION Jul. Current... SERIAL NUMBER LISTING Jul. Current... - SKID SHOES Jul. Aug. 000... 0 Sep. 000 Current... SLIP CLUTCHES Jul. Apr. 0... May. 0 Oct. 0... Nov. 0 Jun.... Jul. Nov.... Dec. Current... SPECIFICATIONS Jul.. Current)... 0 00 Alamo Group Inc. INDEX -
AG0 Rotary ARCHIVE BOOK INTRODUCTION The AG0 Archive Book is a complete listing Parts from the first Unit the Present. The Production Dates, Serial Numbers, Special Notes and Descriptions are furnished help find Replacement Parts. Dimension (if listed) are for Identification Parts and MAY NOT be Manufacturing Specification, Your measurements may vary some from dimensions listed. Some Parts may be changed and be different than parts listed. Some Modification may be required when replacing older parts. Match S/N's listed in the rear this Book with the Ship Dates listed at the p each Parts Page. This is because the wide range Model sizes using these S/N's Beginning Production Date Jul. May Ending Production Date PAGE EXAMPLE FRAME ASSEMBLY Componets Listed This Page Beginning S/N Ending S/N For ordering parts the following instructions are fered help eliminate delay. The purchase order must include the Name, Address (Ship Street Address) the Person / Organization ordering the parts. Who / How Parts should be Billed. Name and Phone Number a Contact Person at your end.. The Purchase Order must list clearly the correct Part Number Part. Quantity each Part wanted, Complete and correct Description each Part. All Parts will be shipped as requested depending on availability and/or reasonability request carrier / method.. Alamo Industrial reserves the right substitute parts where applicable and change prices Without prior notice. Alamo Industrial also reserves the right Ship Parts the most Reasonable way as determined by Alamo Industrial.. Some Parts are unlisted items, which are special production items not normally scked or built for a limited / special use, These parts may be subject special handling or cannot be priced till ordered. Always Request a quotation for such Parts before sending a purchase order. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Apr. 000 DECK ID AG0 Model This Page is Help ID the AG0 Model Rotary Cutter Item Part Description Deck One Formed Channel Brace Run F/ Front Rear, Below Tail Wheel Beam as Shown Hitch Pin Bolt in Hitch Pins & Single Mounting Up-Right Welded Deck. A-Frame Use Top Link Pin that slides through p A-Frame There IS NO Toggle Link here as on the AG0- Model later. The A-Frame Lift Straps had Chain Links welded them where they bolt Deck. Chain Guard Holes for LH & Holes for RH Mounting Front CG is Used Here, ( Holes Total) Gearbox Housings have had NO Top Cover, Square Top Covers & Round Top Covers, So ID by Gearbox is Difficult Tail Whl Beam Short Tail Wheel Beam, is " X " sq. X -/" f/ end Tube center Caster Wheel Fork Shaft. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
May 000 Current DECK ID AG0 Model This Page is Help ID the AG0 Model Rotary Cutter Item Part Description Deck One Formed Channel Brace Run F/ Front Rear, Below Tail Wheel Beam as Shown Hitch Pin Slide through Hitch Pins & Double Mounting Up-Right Welded Deck. A-Frame Use Toggle type Top Link at p A-Frame The A-Frame Lift Straps did NOT have Chain Links welded them where they bolt Deck. Chain Guard Holes for LH & Holes for RH Mounting Front CG is Used Here, ( Holes Total) Gearbox Housings have had NO Top Cover, Square Top Covers & Round Top Covers, So ID by Gearbox is Difficult Tail Whl Beam Long Tail Wheel Beam, is " X " sq. X -/" f/ end Tube center Caster Wheel Fork Shaft. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Apr.. 000 A-FRAME AG0 Model 7 0, 0 7,7 Item Part No. Qty Description 0A A-Frame Upright 0077 Brace Flat, Chain 0 Pivot Bushing 00000 Wrist Pin Only, 7/ Dia. (Cat I) Standard 00700 Wrist Pin Only, -/ Dia. (Cat II) Optional 00000 Nut Hex, F/ Wrist Pin 00000 Lockwasher, F/ Wrist Pin 0 A-Frame Spacer 000000 Washer 0 0070 Bolt, Hex Head 7AH0 Bolt, Hex Head 007 Bolt, Hex Head 000000 Hex Nut 000000 Hex Nut 000000 Lockwasher 7 000000 Lockwasher 0000700 Washer 0 00000 Hex Nut 00000 Bolt * Cat I Furnished as Standard AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
May 000 Current A-FRAME AG0 Model 0 7 0 7 Item Part No. Qty. Description 0077 A-Frame Upright 0077 Brace Flat 0077 Top Link 0077 Bushing 07 Bolt 000700 Lockut 7 000 Bolt 007077 Washer 0000 Locknut 0 0700 Bolt 0000 Locknut 0A Wrist Pin, 7/ Dia.(Cat. I) Standard *0AS Wrist Pin, -/ Dia.(Cat. II) Optional Lynch Pin * Cat I Furnished as standard AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Jan. 0 " Splined Hub BLADE PAN Standard Round Pan Round Pan Standard for these Serial Numbers Item Part No. Qty Description 00770 -- Blade Pan Asy w/ Blades & Bolts 00770 -- Blade Bar Asy w/ Blades & Bolts 007707 Blade Pan Weldment w/ " Hub (Standard Round Pan) 00770 Blade Bar Weldment Only 00707 Blade, Fan (CCW) 7 Blade Bolt Washer 0 Locknut NOTE: The above Blade Carrier WILL ONLY fit on units with Gearbox that has a -/" X Spline Input Shaft & a " Tapered Splined Output Shaft. It WILL NOT FIT on units with later Serial Numbers because Splined Blade Hub IS NOT the Same. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Feb. 0 Nov. BLADE PAN Standard Oval Pan " Splined Hub Oval Pan Standard, See Next page for Optional Round Pan For these Serial Numbers Item Part No. Qty. Description 007 Blade Carrier Asy w/ Blades 0070 Dishpan Weldment w/ " Hub (Standard Oval Pan) Blade Set, ( Blades) CCW Blade Bolt & Nut Set Blade Bolt Only (Included in # ) Washer JRC0 Locknut Only (included in # ) 0077 Blade Washer, Special w/ Square Hole NOTE: The above Blade Carrier WILL ONLY fit on units with Gearbox that has a -/" X Spline Input Shaft & a " Tapered Splined Output Shaft. Carrier WILL NOT FIT on earlier Serial Number unitsa because Splined Hub in Carrier IS NOT the Same AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -7
Feb. 0 Nov. BLADE PAN Optional Round Pan " Splined Hub Round Pan Optional Only, See Previous page for Standard Oval Pan For these Serial Numbers Item Part No. Qty. Description 00707 -- Blade Carrier Asy, (Optional Round Pan) 007 Blade Pan Weldmen t w/ " Hub Blade Set, Fan Blades ( Blades) CCW 0077 Washer Blade Bolt Washer JRC0 Locknut * Replace blades in matched sets only. NOTE: The above Blade Carrier WILL ONLY fit on units with Gearbox that has a -/" X Spline Input Shaft & a " Tapered Splined Output Shaft. Carrier WILL NOT FIT on earlier Serial Number unitsa because Splined Hub in Carrier IS NOT the Same AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Apr. 000 -/" Splined Hub w/ welded on Seal protecr BLADE PAN Standard Round Pan Check Height Measure Top Splined Hub Botm Pan will measure -/" for this Pan carrier -/" Item Part No. Qty. Description 00770 -- Blade Pan Asy, W/ Blades & Bolts 00770 Blade Pan Weldment w/ -/"Hub 0077 Flatwasher w/ Sq. Hole JRC0 Locknut Blade Bolt Blade Set ( Blades), CCW Washer * Replace blades in matched sets only. NOTE: The above Blade Carrier WILL ONLY fit on units with Gearbox that has a -/" X 0 Spline Input Shaft & a -/" Tapered Splined Output Shaft. Carrier WILL NOT FIT on earlier Serial Number units because Splined Hub in Carrier IS NOT the Same Height and would cause Blades be low, Check this Height before ordering Parts is recommennded. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
May 000 Current -/" Splined Hub w/ welded on Seal protecr BLADE PAN Standard Round Pan Check Height -/" Measure Top Splined Hub Botm Pan will measure -/" for this Pan carrier Item Part No. Qty. Description 007 Blade Carrier w/ Hub 0077 Flatwasher w/ Sq. Hole JRC0 Locknut Blade Bolt Blade Set ( Blades), CCW Washer * Replace blades in matched sets only. NOTE: The above Blade Carrier WILL ONLY fit on units with Gearbox that has a -/" X 0 Spline Input Shaft & a -/" Tapered Splined Output Shaft. Carrier WILL NOT FIT on earlier Serial Number units because Splined Hub in Carrier IS NOT the Same Height and would cause Blades be low, Check this Height before ordering Parts is recommennded. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -0
NOTES AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Jan. 0 GEARBOX 7 -/" x Spline Input Shaft 0 0 7, 7, " Tapered Spline Output Shaft, 0 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Jan. 0 GEARBOX P/N 0070A (Available as 0 RPM Only) ITEM PART NO. QTY DESCRIPTION 0070A -- Gearbox Assembly 007 Main Housing 007 Input Shaft 007 Bearing Cup 0077 Bearing Cone 0070 Gear, Input ( Tooth) 007 Spacer 7 007 Snap Ring 007 Side Housing 007 Seal 0 0000 Plug 00707 Plug 00707 Plug (Not Shown) 0000 Lockwasher (Not Shown) 0000 Bolt (Not Shown) 007 a/r Shim 00707 Output Shaft 7 0077 Bearing Cup 000000 Bearing Cup 007 Bearing Cone 0 0070 Gear, Output ( Tooth) 007 Bearing Retainer Cap 007 Seal 0070 a/r Shim 000000 Lockwasher 00000 Bolt 0000 Bolt 7 000700 Nut 00000 Lockwasher 0077 Flat Washer (Blade Hub Retaining) 0 00000 Nut (Blade Hub Retaining) 000000 Cotter Pin (Blade Hub Retaining) Note: a/r = Use Qty. As Required This Gearbox Has a -/" X Spline Input Shaft & " Tapered Spline Output Shaft with No Lower Bearing Spacer, Also the input shaft where clutch slides on has snap ring grooves in it with machined pilot surface on the very end that is about /" long., The Front Bearing Cover has pipe plugs ( large & small) that screw in it, the later gearboxes the plugs screw in themain Housing or Top Cover. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Feb. 0 Dec. GEARBOX,7, 0,7,,, 0 7 0,,7 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Feb. 0 Dec. GEARBOX This Gearbox Has a -/" X Spline Input Shaft & " Tapered Spline Output Shaft & a piece Lower Bearing Spacer Item Part No. Qty Description 0077 Gearbox Asy (Use # 0077B) 007 Housing, Gearbox 007 Bearing, Input Shaft 0070 Retaining Ring 0070 Bearing, Output Shaft 7* 007 Bearing Spacer, Upper Half Piece 007 Bearing Cap, Output 0077 Lockwasher 0 0077 Bolt 0077 Seal, Output 007 Flange Nut, Special 000000 Cotter Pin 0077 -a/r Gasket / Shim (0.00" Thick) 00777 -a/r Gasket / Shim (0.00" Thick) 7 0077 -a/r Gasket / Shim (0.00" Thick) * 0077 Bearing Spacer, Lower Half Piece 007 Plug, Pressure Relief 0* 0077 Shaft, Output (See Note Below) 007 Retaining Ring 007 -a/r Shim (0.00" Thick) 0077 -a/r Shim (0.00" Thick) 007 -a/r Shim (0.00" Thick) 007 Lockwasher 007 -a/r Gasket / Shim (0.00" Thick) 7 0077 -a/r Gasket / Shim (0.00" Thick) 007 -a/r Gasket / Shim (0.00" Thick) 007 Bolt 0 007 Bearing Cap, Input 007 Seal 007 Shaft, Input (-/" Spline) 007 Gear, Output ( Tooth X " Splined Bore) 00000 Plug, Oil Level (Not Shown) 0077 Spacer, F/ Input Gear 007 -a/r Shim (0.00" Thick) 7 0077 -a/r Shim (0.00" Thick) 007 -a/r Shim (0.00" Thick) 007 Gear, Input ( Tooth X " Splined Bore) * If Replaceing Items #7, # or #0 it is recommended Use Output Shaft Replacement Kit #0077, This will update this Gearbox the later style Shaft and Nut Type used in later Gearbox # 0077B. This later Style will be easier Adjust Bearing Preload. Kit will include Shaft, Nut and one piece Bearing Spacer. Replace Gearbox as an Asy w/ # 0077B AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jan. To Nov. GEARBOX 0,7 7, 0 7, 7,, 7 0, AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section - Old Style Output Shaft with Tang Nut & Washer has been Discontinued. When Shaft is ordered from list on following page a Shaft with Slotted Nut & Cotter Pin will be used. (used 0/ 0/ Only)
Jan. To Nov. GEARBOX This Gearbox Has a -/" X Spline Input Shaft & a " Tapered Spline Output Shaft & a piece Lower Bearing Spacer ITEM PART NO. QTY DESCRIPTION 0077B Gearbox Asy 007 Housing 007 Lockwasher 007 Cap Screw 007 Input Cap 007 Input Shaft 007 Oil Seal 7 0077 -a/r Gear Adjusting Shim (0.00" Thick) 007 -a/r Gear Adjusting Shim (0.00" Thick) 007 -a/r Input Cap Gasket (0.00" Thick) 0 0077 -a/r Input Cap Gasket (0.00" Thick) 00777 Spacer 0070 Spacer 007 Output Cap 0077 Lockwasher 0 Cap Screw 0077 Blade Hub 7 000000 Cotter Pin 007 Nut 0077 Oil Seal 0 0077 -a/r Output Cap Gasket (0.00" Thick) 00777 -a/r Output Cap Gasket (0.00" Thick) * 0070 Output Shaft 007 Bearing Asy 007 Gear ( Tooth) * 00770 Brg Adjust Nut, Tanged (0/ 0/) 007 Brg AdjustNut, Slotted (0/ 0/0) * 000000 Cotter Pin, (Use w/ Slotted Nut Only) 0077 Tang Washer, (Use w/ Tang Nut Only) 0070 Flat Washer, (Use w/ Tang Nut Only) 7 007 Bearing Asy * 007 Vent Plug (Dia. 0.7 Tapered Thread) 007 Vent Plug (Dia. 0.7 Straight Thread) w/ Seal Washer 0077 Spacer 007 Gear ( Tooth) * 00000 Oil Level Plug (Sq Head Tapered Thread) 0077 Oil Level Plug (Allen Head w/ Seal Washer) NOTE*: # 0070 Output Shaft will include, Bearing Adjusting Nut, and Cotter Pin. Output Shaft will be type with Slotted Bearing adjusting Nut, If converting from Tang nut Sloted Nut DO NOT use the Washer that was under Tang Nut. There were two types Vent & Oil Level Plugs used. To ID which the Straight Thread & Allen Head Plug has a small circle machined around the threaded hole so the Sealing Washer will Seal, the Tapered Threaded & Square HeadPlug WILL NOT have this Machined circle around the hole. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -7
Dec. Current GEARBOX 7 0,, 0 7, 0, 7 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Current GEARBOX Item Part No. Qty. Description 007 Gearbox Asy 007707 Main Housing 007707 Bearing Asy. 007707 Oil Seal 0077 Bolt 007 Locknut 0077 Flange Nut 7 00 Cotter Pin 007707 Shaft, Output 007707 Gear, Output ( Tooth) 0 0077070 Bearing Adjusting Nut 000000 Cotter Pin 007 Bearing Asy. 007707 Spacer, Input Shaft 0070 Lockwasher 007 Bolt 0077 Plug, Oil Level 7 007 Sealing Washer 007707 Cover, Inspection 007707 Inspection Cover Gasket 0 007 a/r Gasket (0.00" Thick) 0077 a/r Gasket (0.00" Thick) 007 a/r Gasket (0.00" Thick) 0070 Bolt 007707 Bearing Cap, Input 007 Seal 007707 Shaft, Input 7 007707 Gear, Input ( Tooth) 0077 Spacer, Input Shaft 0077 a/r Shim (0.00"Thick) 007 a/r Shim (0.00" Thick) 007 Bolt (Not Supplied w/ Gearbox) 007 Nut (Not Supplied w/ Gearbox) 00770 Hub (Not Supplied w/ Gearbox) This Gearbox Has a -/" X 0 Spline Input Shaft & a -/" Tapered Spline Output Shaft with a bolt on p cover AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Jan. 0 Gearbox Shield 7 Item Part No. Qty Description 007 -- Safety Shield Asy 0070 Bracket. Safety Shield 0070 Shield, Safety 00 Bolt 0000000 Wingnut 07 Nut 000700 Washer 7 00000 Flatwasher To ID: This Shield Used on Gearbox w/ -/" X Spline Input Shaft & A " Tapered Spline Output Shaft & No Top Cover, Front Bearing Cover will have pipe plugs screwded in it. These plug are for Oil level Check and add Oil. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -0
Feb. 0 Nov. Gearbox Shield,0, 7 Item Part No. Qty. Description 00777 Shield, Gearbox 007707 Shield Bracket 007 Bolt 00000 Falt Washer 00000 Locknut 007 Bolt 7 0000000 Wing Nut 00000 Falt Washer 0007000 Lockwasher 0 00770 Spacer 0070 Cover Plate, Blade Bolt Inspection F0 Wing Nut, F/ Inspection Cover To ID: This Shield Used on Gearbox w/ -/" X Spline Input Shaft & A " Tapered Spline Output Shaft & No Top Cover, Front Bearing Cover Will NOT have any Plugs in it. Oil Level Plug is in Back side Gearbox & Oil add Plug is in Top Gearbox. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Current Gearbox Shield 7 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Item Part No. Qty Description 007 -- Safety Shield Asy 0070 Bracket. Safety Shield 0070 Shield, Safety 00 Bolt 0000000 Wingnut 07 Nut 000700 Washer 7 00000 Flatwasher This Shield Used on Gearbox w/ -/" X 0 Spline Input Shaft & A -/" Tapered Spline Output Shaft, Gearbox also has round bolt on p cover. Oil Level Plug is in Backside Gearbox & Oil add plug screws in bolt on Top Cover. Parts Section -
NOTES AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Feb. DRIVELINE (Standard) D/L Had Yellow Shield, Triangle Shape Tube & Shaft, -/" Splined Clutch Hub,, 7 0 7 Item Part No. Qty. Description 0077 -- Driveline Asy w/ Shields 007 Yoke, QD w/ Slide Collar 0077 Slide collar Kit 007 Cross Kit, U-Joint 007 Grease Fitting 007 Grease Fitting 0077 D/L Half Asy, w/ Shield & Clutuch (Mower End) 7 0077 D/L Half Asy w/ Shield & QD Yoke (Tracr End) 0070 Nylon Bolts, Shield Retaining 007 Locking Collar, Outer Shield 0 007 InnerLocking Collar, Inner Shield 00777 Shield Half Asy, Outer 0077 Shield Half Asy, Inner 0077 Shield Asy, Complete Inner & Outer Halves 00700 Slip Clutch Asy ( Friction Disc) 007 Yoke Only, F/ Inner Tube 007 Tube Only, Inner 007 Roll Pin, F/ Inner or Outer Yoke 7 007 Yoke Only, F/ Outer Tube 0077 Tube Only, Outer AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section - Adjust Clutch: Tighten Bolts till Springs are -/" Long
Mar. Apr. 0 DRIVELINE (Standard) D/L Had Yellow Shield, Triangle Shape Tube & Shaft, -/" Splined Clutch Hub,, 7 0 7 Item Part No. Qty. Description 0077 -- Driveline Asy w/ Shields 007 Yoke, QD w/ QD 0077 Slide collar Kit (a/r) 0070 Push Pin Kit (a/r) 007 Cross Kit, U-Joint 007 Grease Fitting 007 Grease Fitting 0070 D/L Half Asy, w/ Shield & Clutuch (Mower End) 7 007 D/L Half Asy w/ Shield & QD Yoke (Tracr End) 0070 Nylon Bolts, Shield Retaining 007 Locking Collar, Outer Shield 0 007 InnerLocking Collar, Inner Shield 007 Shield Half Asy, Outer 007 Shield Half Asy, Inner 007 Shield Asy, Complete Inner & Outer Halves 00700 Slip Clutch Asy ( Friction Disc) 007 Yoke Only, F/ Inner Tube 007 Tube Only, Inner 007 Roll Pin, F/ Inner or Outer Yoke 7 007 Yoke Only, F/ Outer Tube 0077 Tube Only, Outer Adjust Clutch: Tighten Bolts AG0 (Archive Book) 0/0 till Springs are -/" Long 00 Alamo Group Inc. Parts Section -
May 0 Oct. 0 DRIVELINE (Standard) D/L Had Black Shield, Triangle Shape Tube & Shaft, -/" Splined Clutch Hub 7,, 0 7 Item Part No. Qty. Description 0070 -- Driveline Asy w/ Shields 007 Yoke, QD w/ Slide Collar 0077 Slide collar Kit 007 Cross Kit, U-Joint 007 Grease Fitting 0077 Grease Fitting 007 D/L Half Asy, w/ Shield & Clutuch (Mower End) 7 0070 D/L Half Asy w/ Shield & QD Yoke (Tracr End) 0077 Screws, Shield Retaining 007 Bearing, Outer Shield 0 007 Bearing, Inner Shield 007 Shield Half Asy, Outer 007 Shield Tube Only, Outer 007 Short Cone 007 Shield Half Asy, Inner 007 Standard Cone 007 Shield Asy, Complete Inner & Outer Halves 007 Slip Clutch Asy 007 Yoke Only, F/ Inner Tube 007 Tube Only, Inner 0077 Roll Pin, F/ Inner or Outer Yoke 7 007 Yoke Only, F/ Outer Tube 0077 Tube Only, Outer 00700 Decal, D/L Warning Label AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Nov. 0 Jun. DRIVELINE (Standard) D/L Had Yellow Shield, Triangle Shape Tube & Shaft, -/" Splined Clutch Hub,, 7 0 7 Item Part No. Qty. Description 0077 -- Driveline Asy w/ Shields 007 Yoke, QD w/ Slide Collar 0077 Slide collar Kit 007 Cross Kit, U-Joint 007 Grease Fitting 007 Grease Fitting 0077 D/L Half Asy, w/ Shield & Clutuch (Mower End) 7 0077 D/L Half Asy w/ Shield & QD Yoke (Tracr End) 0070 Nylon Bolts, Shield Retaining 007 Locking Collar, Outer Shield 0 007 InnerLocking Collar, Inner Shield 00777 Shield Half Asy, Outer 0077 Shield Half Asy, Inner 0077 Shield Asy, Complete Inner & Outer Halves 00700 Slip Clutch Asy ( Friction Disc) 007 Yoke Only, F/ Inner Tube 007 Tube Only, Inner 007 Roll Pin, F/ Inner or Outer Yoke 7 007 Yoke Only, F/ Outer Tube 0077 Tube Only, Outer AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -7 Adjust Clutch: Tighten Bolts till Springs are -/" Long
Jul. Nov. DRIVELINE (Standard) D/L Had Yellow or Blavk Shield, Triangle Shape Tube & Shaft, -/" Splined Clutch Hub,, 7 0 7 Item Part No. Qty. Description 007 -- Driveline Asy w/ Shields 007 Yoke, QD w/ Slide Collar 0077 Slide collar Kit 007 Universal Joint (Cross Kit) 007 Grease Fitting 0070 Grease Fitting 007 D/L Half Asy, w/ Shield & Clutuch (Mower End) 7 0077 D/L Half Asy w/ Shield & QD Yoke (Tracr End) 0070 Nylon Screws, Shield Retaining 007 Lock Collar Bearing, Outer Shield 0 007 Lock Collar Bearing, Inner Shield 00777 Shield Half Asy, Outer 0077 Shield Half Asy, Inner 0077 Shield Asy, Complete Inner & Outer Halves 0070 Slip Clutch Asy, w/ Coil Springs 0070A *Slip Clutch Asy, w/o Any Coil Springs 007 Yoke Only, F/ Inner Tube 0077 Tube Only, Inner (will replace # 007) 007 Roll Pin, F/ Inner or Outer Yoke 7 007 Yoke Only, F/ Outer Tube 0077 Tube Only, Outer (will replace # 0077) 00700 Decal, D/L Warning Label 0077 Shield Bushing w/ grease Fitting * Clutches # 0070A Shipped w/o Springs in 7 & Only, Use Kit # 0077 Install Springs AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Current DRIVELINE (Standard) D/L had Black Shield, Lemon Shape Tube & Shaft & -/" 0 Splined Clutch Hub Order replacement parts from this page if the prile your driveline is lemon shaped from the end, as shown below 0 7 ITEM PART NO. QTY DESCRIPTION 0077-0 RPM Driveline Assembly 00770-000 RPM Driveline Assembly 0077 Yoke, 0 RPM -/" X Spline - 0077 Yoke, 000 RPM -/" X Spline W7R Universal Joint (Cross Kit) Spring Pin 00777 Inboard Yoke 7 Inner Prile 007777 Prile & Sleeve W.A. 7 0077 Inboard Yoke 0077 Friction Clutch Bearing Ring 0 77 Screw 7 Support Bearing 0 Zerk 0077 Outer Shield Half 0077 Inner Shield Half 0077 Yoke QD Kit, 0 RPM - 0077 Yoke QD Kit, 000 RPM AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Current DRIVELINE Optional Cat 0 7 ITEM PART NO. QTY DESCRIPTION 0077 - Driveline Assembly, 0 RPM WA Yoke W0 Cross & Bearing Kit 0077 I.B. Yoke & Bar W.A. 00777 I.B. Yoke, Tube and Sleeve W.A. 0077 Friction Clutch 0077 Outer Shield Tube Assy. 7 0077 Inner Shield Tube Assy. 00777 Shield Bearing 0077 Sleeve Bearing 0 77 Decal Outer 77 Decal Inner 770 Zerk AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -0
Jul. Apr. 0 SLIP CLUTCH Note: Used with D/L Assembly 0077 & 0077 7 0 -/" X Spline Hub Item Part No. Qty Description 00700 -- Slip Clutch Asy 007 Nut and Bolt 0070 Pressure 0070 Inner Plate 0070 Clutch Lining 00700 Clutch Body, Hub, -/" X Spline 00700 Bolt And Nut Set 7 007 Plate with Holes 0070 Spacer 0070 Yoke 0 0070 Clutch Spring 0070 Dirt Shield AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section - Adjust Clutch: Tighten Bolts till Springs are -/" Long
May. 0 Oct.0 SLIP CLUTCH Note: Used with D/L Assembly 0070 -/" X Spline Hub 7 Item Part No. Qty Description 007 -- Slip Clutch Asy 007 Nut and Bolt 0070 Pressure 0070 Clutch Lining 00700 Clutch Body, Hub, -/" X Spline 0070 Nut & Bolt 0070 Bushing 7 0070 Flanged Yoke 007 Dirt Shield 007 Springs AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section - Adjust Clutch: Tighten Bolts till Springs are -/" Long
Nov. 0 Jun. SLIP CLUTCH Note: Used with D/L Assembly 0077 7 0 Clamp Connection -/" X Spline Hub Bolts & Springs Total Item Part No. Qty Description 00700 -- Slip Clutch Asy 007 Nut and Bolt 0070 Pressure 0070 Inner Plate 0070 Clutch Lining 00700 Clutch Body, Hub, -/" X Spline 00700 Bolt And Nut Set 7 007 Plate with Holes 0070 Spacer 0070 Yoke 0 0070 Clutch Spring 0070 Dirt Shield AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section - Adjust Clutch: Tighten Bolts till Springs are -/" Long
Jul. Nov. SLIP CLUTCH Note: Used with D/L Assembly 007 Adjust Clutch: Tighten Bolts till Springs are -/" Long Clamp Connection 7 -/" X Spline Hub Bolts & SpringsTotal Bolts (item # ) are spaced eqaul distance apart as shown. This type will not have metal band type dust shield around outside. Item Part No. Qty Qty Description 0070 -- Slip Clutch Asy, With Springs 0070A -- Slip Clutch Asy, With Out Springs (obsolete) 0070 Flange Yoke 0070 Bolt & Locknut 007 -- Spring 0077 -- Spring Kit, Conversion w/ Item # ( #0070) 0070 Bushing 0070 Clutch Hub, -/" X Spline 0070 Friction Disk 7 007 Inside Plate W/ Holes 0070 -- Pressure Plate 0077 -- Pressure Plate, (Replacement Part Only) 007 -- Bolt & Locknut NOTE: Some Clutches # 0070A were used in 7 &, These DID NOT HAVE the coil springs. Not all Shipped were springless type, Most the ones w/o Springs were converted useing Kit # 0077, This included Springs, Bolts, Nuts & a new Pressure Plate that is used with the Springs, The pressure plate for the springless clutch is available as replacement part Only, BUT it is recommended use complete Spring kit. Once the Kit has been installed the Clutch becomes a Spring type # 0070 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Current SLIP CLUTCH Cat Standard Note: Used with D/L Assembly 0077 & 00770 Bolts & Springs Total -/" X 0 Spline Hub Clamp Hub Connection To Adjust tighten Springs -/" Long when tight, 0 7 Item Part No. Qty Description 0077 - Slip Clutch 0077 Flange Yoke Friction Disk 0077 Hub 0077 Drive Plate 0077 Drive Plate 00777 Thrust Plate 7 0077 Bolt 0077 Compression Spring 007 Lockwasher 0 007 Locknut 00777 Locknut 0077 Bolt Bolts (item # 7) are spaced eqaul distance apart as shown. This type will not have metal band type dust shield around outside. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Dec. Current SLIP CLUTCH Optional Cat Note: Used with D/L Assembly 0077 Bolts & Springs Total -/" X 0 Spline Hub Clamp Hub Connection To Adjust tighten Springs -/" Long, 0 7 Item Part No. Qty Description 0077 Slip Clutch 0077 Flange Yoke 0000 Friction Disk 00777 Hub 0077 Drive Plate 0077 Drive Plate 00777 Thrust Plate 7 0077 Bolt 0077 Compression Spring 007 Lockwasher 0 007 Locknut 700C Locknut 0700 Bolt Bolts (item # 7) are spaced eqaul distance apart as shown. This type will not have metal band type dust shield around outside. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul.. Aug. 000 CASTER WHEEL ASY Note way Pivot Tube is welded through Beam 0 7 0 Item Part No. Qty Description 0000 Tailwheel Beam, w/bushings, (" X " X -/" Long) 00000 Tailwheel Asy 00000 Support Bracket, LH 00000 Support Bracket, RH 00000 Bracket, Positioning 000 Spacer 7 7A Bolt 7A00 Bolt Sintered Iron Bushing, -/ ID 0 000000 Lock Washer B0 Nut GR00 Locknut B00 Plain Washer 0F Grease Fitting * Measure Tailwheel Beam from center Caster Fork Pivot Shaft End Beam where it mounts Deck for length. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -7
Sep. 000 Current CASTER WHEEL ASY Note way Pivot Tube is welded End Beam 0 7 0 Item Part No. Qty Description 00777 Tailwheel Beam, w/bushings (" X " X -/") 00000 Tailwheel Asy 00000 Left Side Support Bracket 00000 Right Side Support Bracket 00000 Positioning Bracket 000 Spacer 7 7A Bolt 7A00 Bolt Sintered Iron Bushing, -/ ID 0 000000 Lock Washer B0 Nut GR00 Locknut B00 Plain Washer 0F Grease Fitting * Measure Tailwheel Beam from center Caster Fork Pivot Shaft End Beam where it mounts Deck for length. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Current CASTER WHEEL & HUB ASY 0 /" Spindle Bolt 0,, 7 7 7 7 Item Part No. Qty Description 00000 Caster Whl, Caster Fork & Hub Asy 70 Tire Wheel Asy 70A Tire 70B " Dia. Wheel (Bolted Assy) 70D Hub Asy (with brgs & seals) 0070 Bearing Cup 70F Bearing Cone 7 70E Seal 00770 Grease Fitting (Threaded) 0000000 Grease Fitting 7A0 Bolt 0 7A Bolt 000000 Lockwasher 0000 Lockwasher,,, Item Part No. Qty Description 0000 Nut 0000 Caster Fork Wldmnt 70CC Bushing 70DB Dust Cap 7 0 Bushing 70DA Spindle Bolt B00 Washer 0 B00 Flatwasher E0 Castle Nut Slot 0 Cotter Pin 007 Cotter Pin 70H -ref Tire & Whl Asy (Bolted Asy. w/o Hub) AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Aug. 000 DEFLECTOR FRONT Item Part No. Qty Description 0077 - Front Deflecr Asy 0070 Bracket 007 Panel 000 Bolt 0000 Locknut 00000 Bolt 00000 Flat Washer 7 00000 Locknut 0000 Woodwasher 000000 Flatwasher AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -0
Sep. 000 Current DEFLECTOR FRONT 7 Item Part No. Qty Description 00777 - Front Deflecr Assy 0070 Bracket 00777 Panel 000 Bolt 0000 Locknut 00000 Bolt 00000 Flatwasher 7 00000 Locknut 0000 Woodwasher 000000 Flatwasher AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Aug. 000 DEFLECTOR REAR 7 Item Part No. Qty. Description 007 Deflecr Asy, Rear 007 Band 007 Deflecr, Rubber Guard 007 Bolt 0000700 0 Flat Washer 000000 Nut, Toplock 00000 7 Bolt 7 00000 Flatwasher 00000 7 Locknut 0000 7 Woodwasher AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Sep. 000 Current DEFLECTOR REAR 0 7 Item Part No. Qty Description 00777 Deflecr Asy, Rear 00777 Deflecr Weldment, LH Rear 0077 Deflecr Weldment, RH Rear 0077 Deflecr Panel, Rear 0077 Deflecr Bar, Rear 000700 Bolt 7B Bolt 7 0000700 7 Flatwasher 000000 Locknut 0077 Mount Plate, RH Rear 0 0077 Mount Plate, LH Rear NOTE: These Deflecrs WILL NOT FIT on earlier units unless T/W Beam is Changed. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Aug. Aug. 000 CHAIN GUARD FRONT Note Single Upright w/ Bolt in Hitch Pin Item Part No. Qty Description 0070 RH Single Asy 0077 RH Double Asy 0070 LH Single Asy 007 LH Double Asy 0070 Guard Plate, (RH or LH Single) 007 Guard Plate, (RH or LH Double) 007 Chain- Link (Single) 007 Chain -Link (Double) 007 Rod (R&L Single) 007 Rod (R&L Double) 0070 Bolt 000000 Washer 0000 Nut AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Sep. 000 Current CHAIN GUARD FRONT 7 Note Double Upright w/ Clip in Hitch Pin 7 Item Part No. Qty Description 00777 LH Asy Single 007770 RH Asy Single 007770 LH Asy Double 00777 RH Asy Double 000000 Locknut 007 Bolt 007 7 Chain 0070 Plate 00777 Side Deflecr 000000 Washer 7 0000 Locknut 0070 Bolt 0077 Rod AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. May CHAIN GUARD REAR, 0 7 7 Item Part No. Qty. Qty Description Sngl Dbl 007000 -- Rear ChainGuard Asy, Single Curtain 0070 -- Rear Chain Guard Asy, Double Curtain 00700 -- Guard Weldment (Single) 0070 -- Guard Weldment (Double) 00700 0 Chain- Link 007000 Rod Bolt 000 Bolt B00 7 7 Flatwasher 7 000000 7 7 Locknut 0 Locknut 00700 -- Cable Clamp (Double Curtain Only) 0 007007 -- Cable (Double Curtain Only) AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jun. Aug. 000 CHAIN GUARD REAR RH Chain Guard Asy 7 7 7 7 LH Chain Guard Asy Item Part No. Qty. Qty. DESCRIPTION Sngl Dbl 007000 -- Chain Guard Asy, Rear (Single) 0070 -- Chain Guard Asy, Rear (Double) 00770 -- Chain Guard Asy. LH Side (Single) 00770 -- LH Chain Guard Brkt LH Side (Single) 00770 -- Chain Guard Asy. RH Side (Single) 00770 -- RH Chain Guard Brkt RH side (Single) 0070 -- Chain Guard Brkt LH & RH Side (Double) 00700 0 -- Chain - Link (Sngl use ea Side) 00700 -- Chain - Link (Double is one piece) 0070 -- Rod (Single) 007 -- Rod (Double) Carriage Bolt 000 Carriage Bolt 7 B00 7 7 Washer 000000 7 7 Nut, Toplock 0 Pipe Spacer NOTE: Double Chain Guard is not Shown AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -7
Sep. 000 Current CHAIN GUARD SINGLE REAR Single Row Chain Guard Option 7 0 Item Part No. Qty. Description 0077 -- Chain Guard Asy Single, Rear Complete 00770 Chain Guard Bracket 0077 Rear Right Deflecr Weldment 00777 Rear Left Deflecr Weldment 0077 Right Rear Mount Plate 0077 Left Rear Mount Plate 000700 Bolt 7 7B Bolt 0000700 7 Flatwasher 000000 Locknut 0 00700 Chain 007 Rod AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Sep. 000 Current CHAIN GUARD DOUBLE REAR Double Row Chain Guard Option 7 0 Item Part No. Qty Description 00770 -- Chain Guard Asy Double, Rear Complete 00770 Chain Guard Bracket 0077 Deflecr Weldment, RH Rear 00777 Deflecr Weldment, LH Rear 0077 Mount Plate, RH Rear 0077 Mount Plate, LH Rear 000700 0 Bolt 7 7B Bolt 0000700 7 Flatwasher 000000 Locknut 0 00700 Chain 007 Rod 00770 Spacer 000 Bolt AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Aug. 000 SKID SHOE LH or RH This Deck has Single Lugs welded Deck Mount A-Frame & Hitch Pin Rounded Ends on these Skid Shoes Item Part No. Qty Description 000000 Skid Shoe, LH or RH A Plow Bolt 00000 Flat Washer 0000 Lockwasher 0000 Nut Hex Qty Shown F/ LH or RH Side, Double Qty F/ Both Sides AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -0
Sep. 000 Current SKID SHOE LH or RH This Deck has Double Lugs welded Deck Mount A-Frame & Hitch Pins Squared Ends on these Skid Shoes Item Ppart No. Qty Description 007770 Skid Shoe LH or RH 00000 Locknut A Bolt 00000 Flatwasher Qty Shown F/ LH or RH Side, Double Qty F/ Both Sides AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Aug. 000 Aug. 000 CHECK CHAINS (Optional) Bolts Lower Hole the inside Item Part No. Qty. Description 70 Carrier Chain Asy 70 Carrier Adjustment Strap Bolt 7 Nut 7 Lockwasher Above Shows Deck with Single A-Frame / Hitch Lug on Deck, Feb 00 & Down Later Components for Chck Chains Did Not Change, Deck Did. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Sep. 000 Current CHECK CHAINS (Optional) Bolts Lower Hole (Not Shown) on the Inside Lug Item Part No. Qty. Description 70 Carrier Chain Asy 70 Carrier Adjustment Strap Bolt 7 Nut 7 Lockwasher Above Shows Deck with Double A-Frame / Hitch Lug on Deck, Mar. 00 & Up, Components for Check Chains Did Not Change, Deck Did. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Aug. Current OFFSET HITCH (Optional) 7 7 7 7 0 Item Part No. Qty. Description 0700000 Off Set Hitch Adapter 070000 Adapter Mainframe 070000 Stabilizer 070000 Brace Lug and Chain 070000 Adjustable Lift Lug 07 Pin 7A Bolt 7 B00 Washer 0 Bushing JRC0 Nut, Toplock 0 W Retaining Pin Item Part No. Qty. Description 00000 Bolt 000000 Lockwasher 000000 Hex Nut 7AH Bolt 0 Bushing 007 Locknut 7 7AH0 Bolt JRC00 Locknut 70 Bushing AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
NOTES AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Current DECALS A0 Model 7 0A 7 7 0 WHEN THIS SYMBOL IS DISPLAYED, BE ALERT! PAY ATTENTION! SOMEONE'S LIFE IS AT STAKE! 0 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Current DECALS A0 Model Item Part No. Qty Description 0077 Peligro, Get Manual Translated 0077 Danger, Multi-Hazard 00700 Danger, D/L Shield missing 00700 Danger, Rotating Driveline 007 Danger, Driveline Hazards 000 Important, Genuine Parts, Rotary 00777 Instructions, Notice Owner A 00777 Peligro, Rotating Driveline Translation 7 0077 Warning, Use/Repair Shields & Guards 00777 Danger, Blades/Thrown Objects 007 Instructions, Slip Clutch Adjustment 0 00777 Instructions, Notice Owner 0A D0 Instructions, 0 RPM Operation D Instructions, 000 RPM Operation 0007 * Reflecr, *SMV Emblem 0077 Logo, Alamo Group 007 Logo / Name, Alamo Industrial Logo 0077 Name, A0 nfs Serial Number Plate 7 7 Reflecr, Red 0777 Instruction, Operars Manual Inside 00770 Canister, Operars Manual 0 007C Operars Manual 00000 Bolt 0007000 Lockwasher 00000 Flatwasher 0 Locknut * FURNISHED BY TRACTOR MANUFACTURER AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -7
Jul. Current DECALS A0 Model - 007-00700 - 00700-007 7-0077 - 00777-000 AG0 (Archive Book) 0/0 00 Alamo Group Inc. - 0077 Parts Section -
Jul. Current DECALS A0 Model - 0077-0077 7-7 - 0077 - Not Shown (See Inside Front Cover Manual) - 007 0-00777 0A - D0 A - 00777 --0077 AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Jul. Current SPECIFICATION A0 Model TORQUE VALUES - BOLTS: Recommended Torque, Ft lbs & (Nm) IMPORTANT! Listed below IS DRY BOLT TORQUE and NOT APPLICATION TORQUE, Component Application Torque will vary dependimg on what is bolted down and the type material (Metal) that is being bolted gether. Thread condition and lubrication will make Torque vary. Inche Sizes Metric Sizes Bolt Dia. inch / / / 7/ / / / / 7/ -/ -/ -/ -/ (B) (D) (F) Plain Head Dashes Dashes. (7.) () 0 (7) (7) (7) 7 (0) 0 () () 0 (7) 0 () 0 (7) 0 () 700 () 0 () 0 () 0 (7) (7) (7) () 0 (7) 70 (0) 00 (07) (0) 70 (0) 0 () 0 () 0 (00) 00 (7) () 0 () 0 () 0 (0) 0 () 7 (0) 0 () (7) () 00 () 0 (7) 00 (7) 0 (7) 0 () Bolt Dia. mm 0 0 7 0.. 0. 0 7 0 0 0 00 00 00 7 0 0 70 00 70 0 00 7 00 00 00 0 0 00 0 0 700 000 700 00 000.. 70 0 0 00 0 0 00 000 00 000 00 00 (Newn-Meters) To Convert from ft. lbs Newn Meters Multiply ft. lbs by. ALWAYS CHECK MARKINGS ON TOP OF BOLT HEAD OR OTHER BOLT DESCRIPTIONS AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -0
AG0 ROTARY S/N & SHIP DATES From Feb. Current. See Serial Numbers & Serial Number Model Prefix in these Pages determine when Unit was shipped, after this is determined use that Date match the Dates at the p the Parts Page determine what Parts are needed.. S/N's will include Prefix (Example AG0-000), The prefix determines which Deck Width is used and must be used determine which size Unit you have. See Prefix for size. SPECIAL NOTE; There was a Prefixe change about 07/ the prefix 0- had the leter AG Added become AG0-, During this period a Serial Number may also have been used again. There were a few enter with th AG Prefix earlier than 07/ but it was not standard till after 07/. ALLWAYS USE PREFIX IN W/ SERIAL NUMBER, The same Serial Number is used on DIFFERENT MODEL UNIT but the Prefix WILL NOT be the Same!. Model Identification, The best way is see the Serial Number Plates on Decks. If this is not available measure the over all width Decks from outside side skirt opossite out side side skirt, DEDUCT about " " from tal width and it will give you an approximate cutting width for Deck.. S/N's ending with "A" or "D" indicate Duplicate, This S/N was used twice. In some cases there was time between the usage and sometime within the same time frame.. When ordering Parts for Deck it will be required know what size they are (See Prefix in S/N ) and in some cases it will be rquired know what the part looks like or how it is shaped. In this book there are a number descriptions and/or statements about how something is built or shaped. a good example is the Gearbox Input Shaft. There are DIFFERENT Gearboxes that use DIFFERENT Shafts, Size number Spline, These WILL NOT interchange between these Gearboxes.. There are possible some Serial Numbers that are not listed in this list as it is possible they were not listed in the system. Note: Serial Numbers Listed in following pages are from and Up. This Book List Parts Changes from Current, If Questions about S/N 's that are not listed in this Book contact Alamo Industrial Cusmer Service Dept. AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
Mar. Current AG0 S/N SHIP 0-000... 07/ AG 0-000... 0/ 0-000... / AG 0-000... 0/ 0-000... / 0-000... 0/ 0-000... 0/ 0-000... 0/ 0-0007... 0/ 0-000... 0/ 0-000... 0/ 0-000... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ AG 0-007... 0/ 0-00... 0/ 0-00... 0/ 0-000... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ AG 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-007... 0/ 0-00... 0/ 0-00... 0/ 0-000... 0/ 0-00... 0/ 0-00... 0/ 0-00... / 0-00... / 0-00... / 0-00... / 0-007... / 0-00... / 0-00... / 0-000... / 0-00... / 0-00... /0 AG 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-007... 0/0 0-00... 0/0 0-00... 0/0 0-000... 0/0 0-00... 0/0 AG0 (Archive Book) 0/0 00 Alamo Group Inc. AG0 S/N SHIP 0-00... 0/0 0-00... 0/0 AG 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-007... 0/0 0-00... 0/0 0-00... 0/0 0-000... 0/0 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-00... 0/0 0-007... 0/0 0-00... 0/0 0-00... 0/0 0-0070... 0/0 0-007... 0/0 0-007... 0/0 0-007... 0/0 0-007... 0/0 0-007... 0/0 0-007... 0/0 0-0077... 0/0 0-007... 0/0 0-007... 0/0 0-000... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-007... 0/ 0-00... 0/ 0-00... 0/ 0-000... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-00... 0/ 0-007... 0/ 0-00... 0/ 0-00... 0/ 0-000... 07/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ S/N - AG0 Rotary Parts Section - AG0 S/N SHIP AG 0-00... 0/ AG 0-00... 0/ AG 0-007... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 07/ AG 0-0... 07/ AG 0-07... 0/ AG0 S/N SHIP AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... / AG 0-07... / AG 0-0... / AG 0-0... / AG 0-070... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-077... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-000... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-007... 0/ AG 0-00... 0/ AG 0-00... 0/ AG 0-00... 0/
Mar. Current S/N - AG0 Rotary AG0 S/N SHIP AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... / AG 0-00... / AG 0-0... / AG 0-0... / AG0 (Archive Book) 0/0 00 Alamo Group Inc. AG0 S/N SHIP AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-070... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-077... 0/ AG 0-07... / AG 0-07... / AG 0-00... / AG 0-0... / AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... / AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/7 AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-000... 0/7 AG 0-00... 0/ AG 0-00... 0/7 AG 0-00... / AG 0-00D.. / AG 0-00... 0/ AG 0-00... / AG 0-00... / AG 0-007... 0/ AG 0-00... 0/ AG 0-00... 0/7 AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 07/7 AG 0-0... 0/ Parts Section - AG0 S/N SHIP AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/7 AG 0-0... 0/7 AG 0-0... 0/ AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/7 AG 0-0... 0/7 AG 0-00... 0/7 AG 0-0... 0/7 AG 0-0... 0/7 AG 0-0... 0/7 AG 0-0... 0/ AG 0-0... 0/7 AG 0-0... 0/7 AG 0-07... 0/7 AG 0-0... 0/7 AG 0-0... 07/7 AG 0-00... 0/7 AG 0-0... 0/7 AG 0-0... 0/7 AG 0-0... 0/7 AG 0-0... 0/ AG 0-0... 0/7 AG 0-0... 0/7 AG 0-07... 0/7 AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 07/ AG 0-0... 0/ AG 0-0... *Sp AG 0-00... *Start AG 0-007... 07/7 AG 0-00... 07/7 AG 0-00... 07/7 AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG0 S/N SHIP AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0... 07/ AG 0-0... 07/ AG 0-0... 07/ AG 0-07... / AG 0-0... 07/ AG 0-0... 07/ AG 0-00... 07/ AG 0-0... 07/ AG 0-0... 07/ AG 0-0... 07/ AG 0-0... 07/ AG 0-0... / AG 0-0... 07/ AG 0-07... / AG 0-0... 07/ AG 0-0... 07/ AG 0-00... 07/ AG 0-0... 07/ AG 0-0... 07/ AG 0-0... 07/ AG 0-0... / AG 0-0... / AG 0-0... / AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 07/ AG 0-00... 07/ AG 0-0... / AG 0-0... / AG 0-0... 07/ AG 0-0... / AG 0-0... / AG 0-0... 0/ AG 0-07... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... / AG 0-0... *Sp AG 0-070... *Start AG 0-070... 0/ AG 0-0707... 0/ AG 0-070... 0/ AG 0-070... 0/ AG 0-070... 0/ AG 0-07... 0/
Mar. Current AG0 S/N SHIP AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/0 AG 0-07... 0/0 AG 0-077... 0/00 AG 0-07... 0/00 AG 0-07... 0/ AG 0-070... 0/ AG 0-07... 0/00 AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-077... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-070... 0/0 AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/ AG 0-07... 0/0 AG 0-07... 0/ AG 0-07... 0/0 AG 0-077... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-070... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/0 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-077... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-070... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-077... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-070... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG0 S/N SHIP AG 0-07... 0/00 AG 0-07... 0/00 AG 0-07... 0/00 AG 0-077... 0/0 AG 0-07... / AG 0-07... / AG 0-0770... 0/00 AG 0-077... / AG 0-077... 0/00 AG 0-077D.. 0/00 AG 0-077... 0/00 AG 0-077... *Sp AG 0-00... *Start AG 0-00... 0/00 AG 0-007... 0/00 AG 0-00... 0/00 AG 0-00... 0/00 AG 0-00... 0/00 AG 0-0... 0/00 AG 0-0... 0/00 AG 0-0... 0/00 AG 0-0... 0/00 AG 0-0... 0/0 AG 0-0... 0/00 AG 0-0... 0/00 AG 0-07... 0/00 AG 0-0... 0/00 AG 0-0... 0/00 AG 0-00... 0/00 AG 0-0... 0/00 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-07... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-00... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-07... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-00... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 S/N - AG0 Rotary AG0 S/N SHIP AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-07... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-00... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0A.. 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-07... 0/0 AG 0-0... 0/0 AG 0-0... 0/ AG 0-00... 0/ AG 0-0... 0/ AG 0-0... 0/ AG 0-0A.. 0/0 AG 0-0... 0/0 AG 0-0A.. 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-0... 0/0 AG 0-07... 0/0 AG 0-0... *Sp AG 0-07... *Start AG 0-0... 0/00 AG 0-0... / AG 0-0007.. / AG 0-7... 0/ AG0 (Archive Book) 0/0 00 Alamo Group Inc. Parts Section -
A0 Rotary Mower Archive Book 00 Edition A0 ARCHIVE Printed U.S.A. P/N 070