YZ Series Drivers 1. Functions 1.1 Driving Function: YZ Series is Driver designed to install and maintain highway anti-collision guard rails and solar posts, and is especially applicable for driving guardrail posts at newly constructed highways. It is also used for the installation of photovoltaics (PV), solar cells and panels. 1.2 Extracting Function: With the same hydraulic system for extracting poorly driven or incorrectly positioned posts in road maintenance work, it is a professional machine for the extraction of posts from any surface condition. 1.3 Drilling Function: This equipment can drill holes into concrete, rock, granite and other very hard road materials, and then easily install the posts. 2. Features 2.1 YZ Series Driver is composed of the chassis, guide rail, hydraulic arm, hydraulic system, hydraulic hammer, diesel engine, electrical, cooling and control systems, pile extracting equipment and pile drilling equipment. Its characteristics include quick and exact positioning, compact size, lightweight, self-propelled, agile, ergonomic design, easy operation, high efficiency and a low price. 2.2 The tow bar is articulated with the chassis. In using a tow truck or trailer to tow the machine to the work site, first it is needed to lay down the tow bar and its chain disconnected. The up and down, longitudinal and transverse shift, horizontal slide of the hydraulic arm are controlled through the hydraulic system. 2.3 The hydraulic hammer or pile drilling equipment is installed at the front end of the hydraulic arm. The hydraulic arm carries the hammer or pile driving equipment downward and upward along its guide rail for pile driving or drilling by the hydraulic system. You can use the upward force of the hammer to extract the posts out of the ground directly, however there isn t a great amount of upwards force and so, we suggest you to choose our professional Extractor for extracting the posts from the ground. 2.4 It has very famous Changchai brand diesel engine electric starting equipped, has stable performance, simple operation and maintenance and a very long service life. 2.5 The control system is equipped with multidirectional control valves and centralized hydraulic control rods which make the operation simple and convenient. 2.6 It can install piles up to 3m (9.84 ) in length, but on request the machine can be supplied with extension guide rail which can install piles up to 3.5m (11.48 ) or even 4m (13.12 ) long.
2.7 The pile drilling motor is hydraulically operated and the drill is pneumatically operated with an air compressor. The drilling equipment comprises of a hydraulic motor, connecting device, connecting rod, pneumatic percussion hammer and a drill bit. 2.8 The pile driving equipment operates hydraulically under variable horsepower engines and hammers which can be accessorized for job specific functions in boring multi-diameter holes into earth, sand, gravel or other soft media as can be found in agricultural or rural environments. This equipment can be used for photovoltaic (PV), solar cell and panel installations. Deep tread patterned tires allow for maximum traction in all terrains. 2.9 As the pile driving, extracting and drilling equipment all share one chassis, it is the most economical investment for getting all three functions. You can install any accessory onto the chassis according to your working need. Advantages: 1. Systems are simple; while individual units are robust, repairs to nearly any component can be made by any mechanic. 2. Parts for repairs are readily available. 3. Interchangeablity of parts is supported by all models. 4. Similarities to other machines currently in use by customers ensure that further training in the usage of these tools is unnecessary. 5. Supplying power and fuel to these systems is very feasible at construction sites. 3. Specifications Model Unit YZ180 YZ230 YZ260 YZ330 YZ460 Hammer Rating Joule 400-500 600-800 620-970 900-1400 1600-2400 Hammer Weight kg 180 230 260 330 460 Blows per minute Times 350-780 600-900 450-1020 500-735 390-900 Horse Power HP 22 24 28 32 54 Driver Working Pressure Mpa 10-13 10-17 9-13 9-13 11-15 Oil Flow L/min. 30-55 36-65 50-85 45-65 45-85 Oil Tank Capacity L 80 80 80 100 120 Weight Kg 2000 2100 2200 2400 2800 Size (L*W*H) mm 2400*2200*3600 Traveling Speed km/h 0-10 Tow Speed km/h 0-50 Size (L*W*H) mm 1200*700*950 Extractor Weight kg 300
Extracting Force KN 20 30 35 35 40 Size (L*W*H) mm 3200*350*250 Weight kg 300 310 320 320 330 Driller Air Flow m³/min. 10 13 18 18 22 Diamter of Drilling mm 120 150 180 200 220 Holes Max. Drilling Depth mm 1700 Working efficiency mm/min. About 5 YW Series Driver 1. Functions
1.1 Post Driving Function: YW Series Driver is designed to install and maintain highway anti-collision guard rails and solar posts, and is especially applicable for driving guardrail posts in newly constructed highways. It is also used for the installation of photovoltaics (PV), solar cells and panels. 1.2 Extracting Function: With the same hydraulic system for extracting poorly driven or incorrectly positioned posts in road maintenance work, it is a professional machine for the extraction of posts from any surface condition. 1.3 Drilling Function: This equipment can drill holes into concrete, rock, granite and other very hard road materials, and then easily install the posts. 2. Features 2.1 YW Series Driver is composed of the chassis, guide rail, hydraulic system, hydraulic hammer, diesel engine, electrical, cooling and control system, pile extracting and driving equipment. Its characteristics include quick and exact positioning, compact size, lightweight, self-propelled, agile, ergonomic design, easy operation, high efficiency and a low price. 2.2 The tow bar is articulated with the chassis. In using a tow truck or trailer to tow the machine to the working site, first it is needed to lay down the tow bar and its chain disconnected. The up and down, longitudinal and transverse shift, horizontal slide of the guide rail are controlled through hydraulic system. 2.3 The hydraulic hammer is installed at the guide rail. The hydraulic system carries the hammer or pile drilling equipment downward and upward along the guide rail for pile driving or drilling. You can use the upward force of the hammer to extract the posts out of the ground directly, however there isn t a great amount of upwards force and so, we suggest you to choose our professional Extractor for extracting posts from the ground. 2.4 It has very famous Changchai brand diesel engine with electric starting equipped, has stable performance, simple operation and maintenance and a very long service life. 2.5 The control system is equipped with multidirectional control valves and centralized hydraulic control rods which make the operation simple and convenient. 2.6 It can install piles up to 3m (9.84 ) in length, but on request the machine can be supplied with extension guide rail which can install piles up to 3.5m (11.48 ) or even 4m (13.12 ) long. 2.7 The pile drilling motor is hydraulically operated and the drill is pneumatically operated with an air compressor. The drilling equipment comprises of a hydraulic motor, connecting device, connecting rod, pneumatic percussion hammer and a drill bit. 2.8 As the pile driving, extracting and drilling equipment all share one chassis, it is the most economical investment for getting all three functions. You can install any accessories onto the chassis according to your working need. 2.8 The pile driving equipment operates hydraulically under variable horsepower engines and hammers which can be accessorized for job specific functions in boring multi-diameter holes into earth, sand, gravel or other soft media as can be found in agricultural or rural environments. This equipment can be used for photovoltaic (PV), solar cell and panel installations. Deep tread patterned tires allow for maximum traction in all terrains. Advantages: 1. Systems are simple; while individual units are robust, repairs to nearly any component can be made by any mechanic. 2. Parts for repairs are readily available. 3. Interchangeablity of parts is supported by all models. 4. Similarities to other machines currently in use by customers ensure that further training in the usage of these tools is unnecessary. 5. Supplying power and fuel to these systems is very feasible at construction sites. 3. Specifications Model YW180 YW230 YW260 YW330 YW460 Hammer Rating joule 400-500 600-800 620-970 900-1400 1600-2400
Driver Hammer Weight kg 180 230 260 330 460 Blows per minute times 350-780 600-900 450-1020 500-735 390-900 Horse Power HP 22 24 28 32 54 Working Pressure Mpa 10-13 10-17 9-13 9-13 11-15 Oil Flow L/min. 30-55 36-65 50-85 45-65 45-85 Oil Tank Capacity L 80 80 80 100 120 Weight kg 2000 2100 2200 2400 2800 Size (L*W*H) mm 2300*3200*1900 Traveling Speed km/h 0-10 Tow Speed km/h 0-50 Extractor Size (L*W*H) mm 1200*700*950 Weight kg 300 Extracting Force KN 20 30 35 35 40 Size (L*W*H) mm 3200*350*250 Weight kg 300 310 320 320 330 Driller Air Flow m³/min. 10 13 18 18 22 Diamter of Drilling mm 120 150 180 200 220 Holes Max. Drilling Depth mm 1700 Working efficiency mm/min. About 5
TDB Series Driver 1. Functions 1.1 Driving Function: TDB Series Driver is designed to install and maintain highway anti-collision guard rails and guardrail posts. It is also used for the installation of photovoltaics (PV), solar cells and panels. 1.2 Extracting Function: With the same hydraulic system for extracting poorly driven or incorrectly positioned posts in road maintenance work, it is a professional machine for extraction of posts from any surface condition. 1.3 Drilling Function: This equipment can drill holes into the concrete, rock, granite and other very hard road materials, and then easily install the posts. 2. Features 2.1 TDB Series Driver is composed of the chassis, guide rail, hydraulic system, hydraulic hammer, diesel engine, electrical, cooling and control system, pile extracting equipment and pile drilling equipment. Its characteristics include quick and exact positioning, compact size, lightweight, self-propelled, agile, ergonomic design, easy operation, high efficiency and a low price. 2.2 The tow bar is articulated with the chassis. In using a tow truck or trailer to tow the machine to the working site, first it is needed to lay down the tow bar and disengaging of the clutch. The up and down, longitudinal and transverse shift, horizontal slide of the guide rail are controlled through hydraulic system. 2.3 It has a very famous Changchai brand diesel engine electric starting equipped, has stable performance, simple operation and maintenance and a very long service life. 2.4 The control system is equipped with multidirectional control valves and centralized hydraulic control rods which make the operation simple and convenient. 2.5 It can install piles up to 3m (9.84 ) in length, but on request the machine can be supplied with extension guide rail which can install piles up to 3.5m (11.48 ) or even 4m (13.12 ) long.
2.6 The pile drilling motor is hydraulically operated and the drill is pneumatically operated with an air compressor. The drilling equipment comprises of a hydraulic motor, connecting device, connecting rod, pneumatic percussion hammer and a drill bit. 2.7 The pile driving equipment operates hydraulically under variable horsepower engines and drills which can be accessorized for job specific functions in boring multi-diameter holes into earth, sand, gravel or other soft media as can be found in agricultural or rural environments. This equipment can be used for photovoltaic (PV), solar cell and panel installations. Deep tread patterned tires allow for maximum traction in all terrains. 2.8 As the pile driving, extracting and drilling equipment all share one chassis, it is the most economical investment for getting the all functions. You can install any accessories onto the chassis according to your working need. Advantages: 1. Systems are simple; while individual units are robust, repairs to nearly any component can be made by any mechanic. 2. Parts for repairs are readily available. 3. Interchangeablity of parts is supported by all models. 4. Similarities to other machines currently in use by customers ensure that further training in the usage of these tools is unnecessary. 5. Supplying power and fuel to these systems is very feasible at construction sites. 3. Specifications Model Unit TDB180 TDB230 TDB260 TDB330 TDB460 Hammer Rating Joule 400-500 600-800 620-970 900-1400 1600-2400 Hammer Weight Kg 180 230 260 330 460 Blows per minute Times 350-780 600-900 450-1020 500-735 390-900 Horse Power HP 22 24 28 32 54 Working Pressure Mpa 10-13 10-17 9-13 9-13 11-15 Driver Oil Flow L/min. 30-55 36-65 50-85 45-65 45-85 and Oil Tank Capacity L 100 100 100 120 140 Extractor Weight Kg 2600 2800 2900 3100 3500 Size (L*W*H) Mm 4300*2000*2600 Traveling Speed km/h 0-10 Tow Speed km/h 0-70 Extracting Force KN 20 30 35 35 40 Size (L*W*H) Mm 3200*350*250
Driller Weight Kg 300 310 320 320 330 Air Flow m³/min. 10 13 18 18 22 Diamter of Drilling Holes Mm 120 150 180 200 220 Max. Drilling Depth Mm 1700 Working efficiency mm/min. About 5 YC Series Crawler Driver 1. Functions 1.1 Driving Function: YC Series Crawler Driver is designed to install and maintain the highway anti-collision guard rails and guardrail posts. It is also used for the installation of photovoltaics (PV), solar cells and panels. 1.2 Extracting Function: With the same hydraulic system for extracting poorly driven or incorrectly positioned posts in road maintenance work, it is a professional machine for extraction of posts from any surface condition. 1.3 Drilling Function: This equipment can drill holes into the concrete, rock, granite and other very hard road materials, and then easily install the posts. 2. Features
2.1 YC Series Driver is composed of the chassis, guide rail, hydraulic system, hydraulic hammer, diesel engine, electrical, cooling and control system, pile extracting equipment and pile drilling equipment. Its characteristics include quick and exact positioning, compact size, lightweight, self-propelled, agile, ergonomic design, easy operation, high efficiency and a low price. 2.2 The up and down, longitudinal and transverse shift, horizontal slide of the hydraulic arm are controlled through hydraulic system. 2.3 The hydraulic hammer or pile drilling equipment is installed at the front end of the hydraulic arm. The hydraulic arm carries the hammer or pile drilling equipment downward and upward along the guide rail for pile driving or drilling by hydraulic system. You can use the upward force of the hammer to extract the posts out of the ground directly, however there isn t a great amount of upwards force and so, we suggest you to choose our professional Extractor for extracting the posts from the ground. 2.4 It has a very famous Changchai brand diesel engine electric starting equipped, has stable performance, simple operation and maintenance and a very long service life. 2.5 The control system is equipped with multidirectional control valves and centralized hydraulic control rods which make the operation simple and convenient. 2.6 It can install piles up to 3m (9.84 ) in length, but on request the machine can be supplied with extension guide rail which can install piles up to 3.5m (11.48 ) or even 4m (13.12 ) long. 2.7 The pile drilling motor is hydraulically operated and the drill is pneumatically operated with an air compressor. The drilling equipment comprises of a hydraulic motor, connecting device, connecting rod, pneumatic percussion hammer and a drill bit. 2.8 The pile driving equipment operates hydraulically under variable horsepower engines and hammers which can be accessorized for job specific functions in boring multi-diameter holes into earth, sand, gravel or other soft media as can be found in agricultural or rural environments. This equipment can be used for photovoltaic (PV), solar cell and panel installations. Caterpillar tracks allow for maximum traction in all terrains. 2.9 As the pile driving, extracting and drilling equipment all share one chassis, it is the most economical investment for getting all three functions. You can install any accessory onto the chassis according to your working need. Advantages: 1. Systems are simple; while individual units are robust, repairs to nearly any component can be made by any mechanic. 2. Parts for repairs are readily available. 3. Interchangeablity of parts is supported by all models. 4. Similarities to other machines currently in use by customers ensure that further training in the usage of these tools is unnecessary. 5. Supplying power and fuel to these systems is very feasible at construction sites. 3. Specifications Model Unit YC180 YC230 YC260 YC330 YC460 Hammer Rating Joule 400-500 600-800 620-970 900-1400 1600-2400 Hammer Weight Kg 180 230 260 330 460 Driver Blows per minute Times 350-780 600-900 450-1020 500-735 390-900 and Horse Power HP 22 24 28 32 54 Extractor Working Pressure Mpa 10-13 10-17 9-13 9-13 11-15 Oil Flow L/min. 30-55 36-65 50-85 45-65 45-85
Oil Tank Capacity L 100 100 100 120 140 Weight Kg 2500 2600 2700 2900 3300 Size (L*W*H) Mm 2200*3200*1700 Traveling Speed km/h 0-8 Tow Speed km/h 0-50 Extracting Force KN 20 30 35 35 40 Size (L*W*H) Mm 3200*350*250 Weight Kg 300 310 320 320 330 Driller Air Flow m³/min. 10 13 18 18 22 Diamter of Drilling Mm 120 150 180 200 220 Holes Max. Drilling Depth Mm 1700 Working efficiency mm/min. About 5