Electrical Components for the Railway Industry SIRIUS 3RV2 motor starter protectors www.siemens.com/railway-components
Introduction Motor Protection Page 2
Description Motor Protection Description Spring-loaded and screw-type connection system on all terminals (also ring cable lug connection upon request) For screw and snap-on mounting on DIN rail Short-circuit breaking capacity up to 55 ka (partially 100 ka) Tripping class: Class 10 (Sizes S00 & S0) Integrated motor protection up to 32 A at +70 C Rated current: Up to +60 C: 100 % Up to +70 C: 87 % Mechanical service life: Standard version: 100,000 switching cycles Special versions down to 50 C: 500 switching cycles Comprehensive accessories / infeed systems Page 3
Technical Data 3RV2 Motor Protection Article-No. 3RV2.1* 3RV2.2* 3RV2.3* Size S00 S0 S2 Rated current I In = A 0.16-16 12-40 14 80 Three-phase motors P = kw Up to 7.5 Up to18.5 Up to 37 DC short-circuit breaking capacity 1 conducting path [DC150 V] 2 conducting paths in series [DC300] 3 conducting paths in series [DC450 V] 10 ka 10 ka 10 ka Page 4
Technical Data 3RV2 Motor Protection Article-No. 3RV2.1 3RV2.2 3RV2.3 Size S00 S0 S2 Dimensions [mm] [total] W H D 45 97 * 96.9 45 97 * 96.9 55 140 149 Max. rated currents [A] [up to +60C] 16 40 80 Weight [kg / PU] 0.3 0.4 1.04 Page 5
Technical Data 3RV2 Current ranges Optimum adjustment to the motor current up to 70 C Range at 60 C Example: No protection gap at 70 C Example: Selection motor current 11.5 1.8-2.5 A 2.2-3.2 A 2.8-4 A 3.5-5 A 4.5-6.3 A 5.5-8 A 7-10 A 9-12.5 A 11-16 A 14-20 A... 2.2-2.8 A 3.5-4.5 A 5.5-7 A 9-11 A 14-17 A... 1.8-2.2 A 2.8-3.5 A 4.5-5.5 A 7-9 A 11-14 A Range at 70 C (reduction factor for the upper setting value 0.87) Page 6
Description Motor starter protectors 3RV2 for -50 C to +70 C * Description Temperature range from -50 C to +70 C Short-circuit breaking capacity corresponds to the catalog data up to a rated operating voltage of 415 V (test voltage: 440 V) Higher voltages upon request Mechanical service life 3RV2.1.-...-0BA0 3RV2.2.-...-0BA0 500 switching cycles 500 switching cycles *The minimum ordering quantity for special versions amounts to 75 units for sizes S00 / S0 Page 7 Any formation of drops on the device, e.g. condensation, hoar frost, high humidity, is impermissible.
Versions Size S00 for -50 C to +70 C * Motor protection Thermal overload releases Instantaneous overcurrent release Transverse auxiliary switch 2RV2011-1AA10-0BA0 1.1 1.6 A 21 A ----- 3RV2011-1BA15-0BA0 1.4 2.0 A 26 A 1NO + 1NC 3RV2011-1CA10-0BA0 1.8 2,5 A 33 A ----- 3RV2011-1DA10-0BA0 2.2 3.2 A 42 A ----- 3RV2011-1EA10-0BA0 2.8 4.0 A 52 A ----- 3RV2011-1EA15-0BA0 2.8 4.0 A 52 A 1NO + 1NC 3RV2011-1EA25-0BA0 2.8 4.0 A 52 A 1NO + 1NC *The minimum ordering quantity for special versions amounts to 75 units for sizes S00 / S0 Page 8
Versions Size S00 for -50 C to +70 C * Motor protection Thermal overload releases Instantaneous overcurrent release Transverse auxiliary switch 3RV2011-1FA10-0BA0 3.5 5.0 A 65 A ----- 3RV2011-1FA15-0BA0 3,5 5 A 65 A 1NO + 1NC 3RV2011-1GA10-0BA0 4,5 6,3 A 82 A ----- 3RV2011-1HA10-0BA0 5,5 8,0 A 104 A ----- 3RV2011-1HA15-0BA0 5,5 8,0 A 104 A 1NO + 1NC 3RV2011-1JA10-0BA0 7,0-10 A 130 A ----- *The minimum ordering quantity for special versions amounts to 75 units for sizes S00 / S0 Page 9
Versions Size S00 for -50 C to +70 C * Motor protection Thermal overload releases Instantaneous overcurrent release Transverse auxiliary switch 3RV2011-1KA10-0BA0 9.0 12.5 A 156 A ----- 3RV2011-1KA15-0BA0 9,0 12,5 A 163 A 1NO + 1NC 3RV2011-4AA10-0BA0 11 16 A 208 A ----- 3RV2011-4AA15-0BA0 11 16 A 208 A 1NO + 1NC *The minimum ordering quantity for special versions amounts to 75 units for sizes S00 / S0 Page 10
Versions Size S00 for -50 C to +70 C * Transformer protection Thermal overload releases Instantaneous overcurrent release Transverse auxiliary switch 3RV2411-1AA10-0BA0 1,1 1,6 A 33 A ----- 3RV2411-1BA10-0BA0 1,4 2,0 A 42 A ----- 3RV2411-1HA10-0BA0 5.5 8.0 A 163 A ----- 3RV2411-1JA10-0BA0 7.0-10 A 208 A ----- *The minimum ordering quantity for special versions amounts to 75 units for sizes S00 / S0 Page 11
Versions Size S0 for -50 C to +70 C * Motor protection Thermal overload releases Instantaneous overcurrent release Transverse auxiliary switch 3RV2021-4BA10-0BA0 14 20 A 260 A ----- 3RV2021-4DA10-0BA0 20-25 A 325 A ----- 3RV2021-4EA10-0BA0 27 32 A 400 A ----- 3RV2021-4EA15-0BA0 27 32 A 400 A 1NO + 1NC *The minimum ordering quantity for special versions amounts to 75 units for sizes S00 / S0 Page 12
Drawings Dimension drawing Motor starter protector S00 / S0 Hieght (mm) Dimensions Screw-type connection Spring-loaded connection Ring cable lug connection 97 119 Upon request Page 13
Accessories Accessories Page 14
Accessories Accessories Article-No. S00 S0 Lateral AS 3RV29 01-.A/B/C/J ü ü Transverse AS 3RV29 01-.D/E/F/G ü ü Signaling switch 3RV29 21-.M ü ü Undervoltage release 3RV29 02-.A.. ü ü UVR with leading AS 3RV2922-.C.. ü ü Shunt release 3RV29 02-.D.0 ü ü Integrated accessories are now available for sizes S00 and S0 Page 15
Accessories Accessories Infeed systems for energy distribution 3RV2917 3RV1915 3RA68 8US SIRIUS infeed system 3-phase busbar system ("infeed combs") SIRIUS 3RA6 compact starter and circuit breaker Busbar system The suitable infeed solution for all requirements Page 16
Accessories Accessories Infeed systems for energy distribution Page 17
Important links Important links Industrial Controls: Sirius full-range portfolio www.siemens.com/sirius Industry Mall: Platform for e-business and product information www.siemens.com/industrial-controls/mall Online Support: Comprehensive technical product information https://support.industry.siemens.com/ Technical Assistance: Competent technical consulting Internet www.siemens.com/industrial-controls/technical-assistance E-mail technical-assistance@siemens.com Telephone +49 (911) 895-5900 Page 18
Disclaimer The information provided in this brochure comprises descriptions or performance characteristics which may not always be applicable in the described form to the specific application case or which may change due to product advancement. The desired performance characteristics shall only be binding if they are expressly specified upon contract conclusion. Subject to availability and technical changes. All product designations may be trademarks or product names of Siemens AG or supplier companies whose utilization by third parties for their own purposes could violate the rights of the owners. Page 19
Thank you for your attention! Michael Staber Account Manager Railway DF CP S&MK V&KAM Wuerzburger Str. 121 90766 Fuerth, Germany Phone: +49 911 750-9042 Cellular: +49 179 2212179 E-Mail: michael.staber@siemens.com www.siemens.com/railway-components www.siemens.com/railway-components Page 20 10.08.2016 Michael Staber, DF CP S&MK V&KAM