Veronafiere ottobre PDF Free Download

Veronafiere 27-28 ottobre 2015 Gli atti dei convegni e più di 6.000 contenuti su www.verticale.net

Agenda Electric motor grease trends Major OEMs and bearing suppliers Grease requirements for electric motors ExxonMobil s vision for Polyrex EM Critical performance characteristics Grease compatibility Performance summary 1

Electric Motor Lubricating Grease Trends Increasing power density Motors are becoming smaller for given power output Speeds and operating temperatures are increasing Greases required to last throughout motor s life : Fill for Life Requires balance of bleed characteristics, oxidation stability and structural stability Grease is considered a fundamental component of premium electric motors Grease requirements are specified by OEM as integral to new designs Increasing need for quieter greases for noisesensitive applications Automotive under-the-hood application Consumer goods 2

3 Electric Motors - Major OEMs

4 Electric Motors Major Bearing Suppliers

5 Electric Motor Design

Grease Requirements For Electric Motors Good channeling characteristics NLGI Grade 2 or 3 3 grades used where dn>250,000 (dn=bore(mm) x rpm) 500-650 SUS @100 F (c.ca 38 C) base-oil viscosity (~100cSt @ 40 C) High dropping point Measured by ASTM D2265 450 F (232 C) minimum Low oil bleed characteristics Measured by ASTM D1742, ASTM D6184 or IP121 6

...More Requirements For Electric Motor Greases Excellent resistance to high temperature oxidation Usually measured by ASTM D3336 spindle life 500 hour minimum at top operating temp (300-350 F) (149-177 C) Good low temperature torque characteristics Usually measured by ASTM D 1478 Typically 10,000 g-cm max starting torque at -20 F (-29 C) Good anti-wear characteristics but generally non-ep 7

ExxonMobil s Vision for Mobil Polyrex EM To offer a state-of-the-art lubricating grease for use in electric motor bearings that: Sets new standards for long-life grease performance Allows bearing manufacturers to supply grease-lubricated bearings capable of offering longer life, low-maintenance service, on an unprecedented scale in the marketplace Offers low-noise performance desired for noise-sensitive applications 8

Mobil Polyrex EM Delivers STEP-OUT Performance Excellent high-temperature long-life lubrication Outstanding shear stability (mechanical stability) Excellent corrosion resistance Excellent oil bleed characteristics Good low temperature capabilities Good pumpability Increased compatibility with most conventional lithium greases 9

The Performance Breakthrough of Mobil Polyrex EM Extended life without compromise in other grease properties 10

ASTM D3336 Grease Life Test Test conditions 6204 bearing runs @ 10,000 rpm Light loading: 5 lb axial, 15 lb radial 350 F (177 C) bearing temperature Failure detected by an increase in bearing starting torque or a 27+ F temperature spike Duty cycle: 20 hours on, 4 hours off Mobil Polyrex EM achieves : >750 hrs. @ 350 F (177 C) 11

FAG FE9 Grease Life (Variation A) 165 Temperature ( C) to obtain 100 hr minimum life (L50) 160 155 150 145 140 135 130 Mobil Polyrex EM Competitor C Conventional Polyurea Conventional Li-Complex 12

Shear Stability Based on 100,000 Penetration 120 100KX 60X Penetration, Mm/10 100 80 60 40 20 0 Mobil Polyrex EM Competitor C Conventional Polyurea Conventional Li-Complex 13

Anti-Wear Protection Wear protection is measured in the 4-ball wear test (ASTM D 2266) Test conditions Spinning ball rotates against 3 stationary balls Load on spinning ball = 40 kg Test temperature = 167 F Speed of rotating ball = 1200 rpm Test duration = 1 hour Diameter of circular wear scar on stationary balls is measured in mm Industry standard = <0.5-0.6 mm scar Mobil Polyrex EM achieves : 0.4 mm scar 14

Mobil Polyrex EM Exhibits Excellent Water Resistance Water washout test (ASTM D1264) Bearing tested in a shielded, but unsealed housing Test temperature = 79 C Typical lithium complex grease achieves 3-5% washout Mobil Polyrex EM achieves 1.9% 15

EMCOR Rust Test Bearings run in duplicates Rating scale is from 0 to 5 0 = no corrosion 5 = severe corrosion Mobil Polyrex EM achieves 1, 0 rating Rating 0 Rating 5 16

Mobil Polyrex EM Controls Oil Bleed Controlled oil bleed is key to achieving long lubrication life ASTM D1742 oil separation test Predicts the amount of static oil separation at 25 C Measures the amount of oil bleed through a wire mesh with 0.25 psi pressure on the grease Typical Lithium Complex greases achieve <3% oil bleed Mobil Polyrex EM achieves 0.5% 17

Mobil Polyrex EM Controls Oil Bleed Controlled oil bleed is key to achieving long lubrication life ASTM D6184 high temperature oil bleed test Measures oil bleed through a wire mesh at 100 C (30 hours) Low bleed is critical for long-life performance at high temps Mobil Polyrex EM achieves <0.1% bleed 18

Mobil Polyrex EM Controls Oil Bleed IP 121 oil bleed test Similar equipment set-up as ASTM D1742 IP 121 tests run on Mobil Polyrex EM and Competitor C at 40, 70, 120, and 150 C Oil bleed measured at times ranging from 42 hours to 1 week. See graph for details 19

IP 121 Oil Bleed Results 35 30 IP 121 oil separation @ 70 C, 120 C and 150 C 150 C Oil Separation (%) 25 20 15 10 5 0 0 20 40 60 80 100 120 140 160 180 Time (hours) 120 C 150 C 120 C 70 C 70 C Polyrex EM @ 120 C Competitor C @ 120 C Polyrex EM @ 150 C Competitor C @ 150 C Polyrex EM @ 70 C Competitor C @ 70 C 20

Mobil Polyrex EM = Excellent Overall Performance Oil Bleed Mobil Polyrex EM exhibits controlled oil separation even at high temperatures Shear Stability Mobil Polyrex EM exhibits significantly improved shear stability over conventional polyurea greases Compatibility Mobil Polyrex EM exhibits enhanced compatibility with Licomplex and other Polyurea greases Mobil Polyrex EM Bearing Life Mobil Polyrex EM exhibits 3 to 7 times longer bearing life than conventional electric motor greases Noise Performance Mobil Polyrex EM uses a controlled proprietary manufacturing technique to deliver consistent low-noise performance 21

Grease Compatibility Guide Grease Compatibility All Mobil electric motor greases are compatible or moderately compatible with each other Mobil Polyrex EM Mobil Polyrex EM 103 Unirex N2 Unirex N3 Mobilith SHC 100 Mobiltemp SHC 100 Mobil Polyrex EM Mobil Polyrex EM 103 Comp Unirex N2 Comp (FE9) Unirex N3 Comp (FE9) Mobilith SHC 100 Comp Mobil temp SHC 100 M-Comp Comp r/a r/a r/a M-Comp Comp (FE9) Comp (FE9) r/a Comp M-Comp r/a r/a Comp M-Comp Comp Comp r/a M-Comp M-Comp Comp M_Comp M-Comp r/a Comp Comp Compatible Moderately Compatible Incompatible 22

Thanks Questions?

Calcium Sulfonate Thickener Inherent Properties Rust & Corrosion Protection EP/AW Performance Water Resistance Mechanical Stability Wet Mechanical Stability June 22, 2009-1-

Calcium Sulfonate Complex Thickener Chemistry Calcium Sulfonate Grease thickeners are a two component system Component A is a stabilized colloidal suspension of Calcium Carbonate in oil providing thickening properties Imparts excellent rust and corrosion protection by blocking water access to metal surfaces Serves as passive EP for excellent load carrying performance by forming laminar platelets, allowing heavy loads to be carried Component B is a conventional Calcium Complex thickener Provides structural stability Proper manufacturing is critical in the formation of planar calcite crystals, that provide the lower friction product attributes 2 June 22, 2009-2-

Calcium Sulfonate Complex Thickener Chemistry Thickener Component A Colloidal dispersion of Calcium Carbonate particles stabilized by Sulfonate in the oil phase Provides inherent passive EP/AW Properties Provides inherent rust & corrosion protection Prepared by converting amorphous Calcium Carbonate to Calcite crystals through gelation techniques. Calcium Sulfonate Detergent Calcium Carbonate Calcite Crystal Dispersion CaCO 3 3 Non-Polar Hydrocarbon Tail [R-] June 22, 2009 Polar Head [-SO 3 ] -3-

Calcium Sulfonate Complex Thickener Chemistry Thickener Component B Conventional Calcium Complex soap thickener Provides structural stability Calcium Hydroxide + 12-HSA + Complexing Agent Calcium Complex Soap Calcium Hydroxide: Ca(OH) 2 Slaked Lime Milk of Lime Hydrated Lime 12-HSA: 12-Hydroxy Stearic Acid Complexing Agent Low molecular weight Organic acid e. g. Acetic Acid June 22, 2009-4-

Mobil Calcium Sulfonate Grease Technology Inherent Properties Calcium Sulfonate Complex thickener has excellent wet & dry shear stability No significant change in consistency even when highly contaminated with water The thickener acts as a rust inhibitor Demonstrated protection against rust and corrosion in laboratory testing as well as application Calcite platelets formed during thickener production Provide inherent EP protection Thickener structure provides excellent oil control helping to minimize bleed Helps to extend re-lubrication intervals and reduce leakage 5 June 22, 2009-5-

Mobil Calcium Sulfonate Grease Technology Inherent Properties Corrosion Protection Calcium Sulfonates are commonly used as rust inhibitors in formulated lubricants, e. g. Diesel and gasoline engine oils as well as metal working fluids Intrinsic property of the Calcium Sulfonate thickener system inhibits the development of rust and corrosion Additional additives are not required for corrosion protection Centaur exhibits good corrosion protection performance Protects against water Protects against salt water (synthetic sea water) June 22, 2009-6-

Mobil Calcium Sulfonate Grease Technology Inherent Properties EP/AW Performance Thickener production results in the formation of Calcite crystals Performs in a similar manner as MoS2 Conventional sulfur-phosphorus additives are not needed Calcite layers formed on metal surface Calcite plane resists water intrusion, and maintains ability to provide EP protection Sacrificial shear plane provides EP June 22, 2009-7-

Mobil Centaur XHP Calcium Sulfonate Grease Technology Wet & Dry Mechanical Stability Mobil Centaur XHP thickener does not soften excessively when worked Maintains consistency in the Roll Stability Test (ASTM D1831) Mobil Centaur XHP greases absorb water while maintaining consistency Mobil Centaur XHP thickener demonstrates excellent wet structural stability in the Wet Roll Stability Test (ASTM D7342) Maintains consistency even in water saturated environments Resistance to Water High thickener content provides greater adhesive quality Mobil Centaur XHP greases are enhanced with special polymers to improve water resistance Strong adhesion to metal surface Water Spray-Off Performance (ASTM D4049) Strong cohesive properties Water Wash-Off Performance (ASTM D1264) June 22, 2009-8-

Mobil Centaur Calcium Sulfonate Grease Technology Mobil Centaur XHP Typical Properties

Mobil Centaur Calcium Sulfonate Greases Product Overview NLGI Class Base Oil Type Base Oil ISO VG DIN 51825 Code Mobil Centaur XHP 221 1-2 Mineral 220 KP1-2G-20 Mobil Centaur XHP 461 1 Mineral 460 KPF1K-20 Mobil Centaur XHP 462 2 Mineral 460 - Mobil Centaur Moly 1 1 Mineral 320 - Mobil Centaur Moly 2 2 Mineral 320 - Mobil Centaur XHP 461 Mine 1 Mineral 460 - Mobil Centaur XHP 462 Mine 2 Mineral 460 - June 22, 2009-10-

Mobil Centaur Calcium Sulfonate Greases Mobil Centaur XHP 460 Series Mobil Centaur XHP 462 and Mobil Centaur XHP 461 are polymer enhanced Calcium Sulfonate greases developed for the most severe service requirements in a wet environment Typical Properties Test Method Mobil Centaur XHP 461 462 DIN 51825 Classification - KPF1K-20 - NLGI Consistency Class - 1 2 Oil Viscosity 40 ºC, mm²/s ASTM D445 460 460 Dropping Point, ºC ASTM D2265 275 275 Worked Penetration, mm/10 ASTM D217 315 280 Water Wash-Out 79 ºC, weight % ASTM D1264 1.0 0.5 Water Spray-Off, weight % ASTM D4049 25 20 Four Ball Wear Scar, mm ASTM D2266 0.6 0.6 Four Ball Weld Load, kg ASTM D2596 400 400 Data are typical of normal production and do not constitute a product specification June 22, 2009-11-

Mobil Centaur Calcium Sulfonate Greases Mobil Centaur XHP 221 Mobil Centaur XHP 221 is a polymer enhanced Calcium Sulfonate grease formulated for rolling elements in industrial equipment operating at high temperatures or under wet, heavily loaded conditions Typical Properties Test Method Mobil Centaur XHP 221 DIN 51825 Classification - KP1-2G-20 NLGI Consistency Class - 1-2 Dropping Point, ºC ASTM D2265 318 Oil Viscosity 40 ºC, mm²/s ASTM D445 220 Worked Penetration, mm/10 ASTM D217 300 Prolonged Worked Penetration, mm/10 ASTM D217 10 Water Wash-Out 79 ºC, weight % ASTM D1264 1.0 Four Ball Weld Load, kg ASTM D2596 400 EMCOR Rust Prevention (distilled water), rating ASTM D6138 0-1 Copper Corrosion, rating ASTM D4048 1B Oil Separation, weight % ASTM D6148 2 Wheel Bearing Life 160 ºC, hours ASTM D3527 120 Data are typical of normal production and do not constitute a product specification June 22, 2009-12-

Mobil Centaur Calcium Sulfonate Greases Mobil Centaur Moly Series Mobil Centaur Moly 1 and Mobil Centaur Moly 2 are Calcium Sulfonate greases developed for severe service requirements realized in Off-Highway service Typical Properties Test Method Mobil Centaur Moly 1 2 NLGI Consistency Class - 1 2 Dropping Point, ºC ASTM D2265 288 280 Oil Viscosity 40 ºC, mm²/s ASTM D445 320 320 Worked Penetration, mm/10 ASTM D217 325 Min 265 Water Wash-Out 79 ºC, weight % ASTM D1264 1.0 1.0 Water Spray-Off, weight % ASTM D4049 25 20 Four Ball Wear Scar, mm ASTM D2266 0.5 0.4 Four Ball Weld Load, kg ASTM D2596 500 500 Data are typical of normal production and do not constitute a product specification June 22, 2009-13-

Mobil Centaur Calcium Sulfonate Greases Strengths Ability to lubricate in a water saturated environment Inherent corrosion protection Long lasting EP properties Excellent shear stability even when contaminated with water Excellent oil release control in high temperatures Limitations Oxidation at high temperatures Can lose some ability to lubricate at temperatures above 130 ºC (266 ºF) More difficult to pump at low temperatures due to high thickener content June 22, 2009-14-

Mobil Centaur Calcium Sulfonate Grease Technology Competitive Survey

All Calcium Sulfonate Greases are not the same... ExxonMobil performed a competitive survey of greases typically used in sever steel mill applications Included in the survey was Mobil Centaur XHP and five competitive products Greases were evaluated in a battery of 22 tests focused on the application performance requirements critical to steel mill applications Performance ratings developed based upon the individual test results, and the documented precision of the tests methods employed This report concluded that all Calcium Sulfonate greases are not the same... June 22, 2009-16-

Mobil Centaur XHP Calcium Sulfonate Grease Overall Performance Mobil Centaur XHP provides balanced performance helping to extend equipment life, increase productivity, and decrease maintenance costs Overall Performance Rating 9.5 7.8 7.7 8.1 7.3 7.0 Centaur XHP 461 Competitor A Competitor B Competitor C Competitor D Competitor E June 22, 2009-17-

Mobil Centaur XHP Calcium Sulfonate Grease Wet Structural Stability Wet Structural Stability prevents excessive grease softening and leakage when exposed to water helping the grease to stay in place, Wet Structural Stability Rating maintain equipment protection, and 9.5 potentially decrease grease consumption 8.0 even in water saturated 6.5 environments 5.0 5.3 5.5 June 22, 2009 Centaur XHP 461 Competitor A Competitor B Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 Testing: Wet Shell Roll ASTM D1831mod + Bethlehem Steel Combo (BSC) Test LT-46 Competitor C Competitor D Competitor E -18-

Mobil Centaur XHP Calcium Sulfonate Grease Water Resistance Water Resistance prevents grease from being washed out of equipment helping the grease to stay in place, Water Resistance Rating maintain equipment protection, and 10.0 potentially decrease grease consumption 8.0 7.5 7.0 even when subjected to 6.0 water spray 4.5 Centaur XHP 461 Competitor A Competitor B Competitor C Competitor D Competitor E Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 Testing: Resistance to Water Spray ASTM D4049 + Water Resistance DIN 51807-1 June 22, 2009-19-

Mobil Centaur XHP Calcium Sulfonate Grease Oil Release Control Oil Control over a range of temperatures helps ensure proper lubrication and equipment protection through reduced wear, leading to increased equipment Oil Release Control Rating availability, and 10.0 10.0 9.5 9.5 potentially reduced 9.5 9.5 maintenance costs Centaur XHP 461 Competitor A Competitor B Competitor C Competitor D Competitor E Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 Testing: Gelman Bleed AM-S1407 + Oil Separation IP 121 June 22, 2009-20-

Mobil Centaur XHP Calcium Sulfonate Grease Rsut & Corrosion Protection Rust and Corrosion Protection helps protect equipment and extend equipment life in wet environments, potentially decreasing equipment downtime and Rust & Corrosion Protection Rating maintenance costs, by preventing 10.0 10.0 10.0 10.0 10.0 9.5 Centaur XHP 461 Competitor A Competitor B Competitor C Competitor D Competitor E Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 Testing: ASTM Rust ASTM D1743 + EMCOR Dynamic Rust Test ASTM D6138 June 22, 2009-21-

Mobil Centaur XHP Calcium Sulfonate Grease Low Temperature Performance Low Temperature Performance helps ensure grease can be applied as needed through central distribution systems to critical components potentially decreasing equipment Low Temperature Performance Rating downtime and maintenance costs, but only if balanced with 8.5 other critical performance 7.5 7.0 features 5.5 4.0 3.5 June 22, 2009 Centaur XHP 461 Competitor A Competitor B Competitor C Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 Testing: USS Low Temperature Mobility @ 20 F M1390 + Lincoln Ventmeter @ 10 F K95400 Competitor D Competitor E -22-

Mobil Centaur XHP Calcium Sulfonate Grease Competitive Overview Product Strengths (Rating min 9) Weaknesses (Rating max 5) Mobil Centaur XHP 461 Competitor A Competitor B Competitor C Competitor D Competitor E June 22, 2009 Water Resistance Rust and Corrosion Oil Control Structural Stability Wet Structural Stability Rust and Corrosion Oil Control Structural Stability Rust and Corrosion Oil Control Structural Stability Rust and Corrosion Oil Control Structural Stability Wet Structural Stability Rust and Corrosion High Temperature Performance Oil Control Structural Stability Rust and Corrosion Low Temperature Performance Oil Control Structural Stability Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 None Low Temperature Performance None Low Temperature Performance Wet Structural Stability Water Resistance -23-

Mobil Centaur XHP Calcium Sulfonate Grease Competitive Overview Product Strengths (Rating min 9) Weaknesses (Rating max 5) Mobil Centaur XHP 461 MOBIL BALANCED FORMULATION Competitor A Competitor B Competitor C Competitor D Competitor E June 22, 2009 Rust and Corrosion Oil Control Structural Stability Rust and Corrosion Oil Control Structural Stability Rust and Corrosion Oil Control Structural Stability Wet Structural Stability Rust and Corrosion High Temperature Performance Oil Control Structural Stability Rust and Corrosion Low Temperature Performance Oil Control Structural Stability Source: EMRE, 2010 Industrial Grease Steel Mill Competitive Survey, RL.6PI.2010 Low Temperature Performance None Low Temperature Performance Wet Structural Stability Water Resistance -24-

Mobil Centaur Calcium Sulfonate Grease Technology Target Markets & Applications

Mobil Centaur XHP Calcium Sulfonate Grease Technology A problem solver for wet applications June 22, 2009-26-

Target Markets & Applications Steel Industry Water Heat Off-Highway & Mining High contamination Sliding friction Water June 22, 2009-27-

Target Market Steel Industry Mobil Centaur XHP technology is ideally suited for Steel Mill Applications High temperatures, wet environments Demonstrated performance in hot strip mill bearings Demonstrated performance in castors June 22, 2009-28-

Target Market Off-Highway & Mining Low speed Heavily loaded Water contamination Sliding friction Dust and dirt June 22, 2009-29-

Target Market Off Highway & Mining Bushings Challenges Heavy loads and very low speeds in bushing applications subjected to oscillating and / or rolling motion High level of contamination from dust and dirt Heavily loaded bushings need a grease that can provide friction reduction and EP properties Needs to stay in the bushing, protect the metal surface from water and dirt contamination Water contamination Must stay in place and maintain consistency Must protect steel, copper alloys and seal materials Infrequent re-greasing intervals June 22, 2009-30-

Mobil SHC Polyrex TM Series Grease for high temperature operating conditions MCM Verona 28 October 2015 Paolo Burchianti LFE Esso Italiana Release Category: EXTERNAL 2 2009 Exxon Mobil Corporation. All rights reserved

Maximum Performance for Industrial Productivity Mobil Polyrex Thickener Technology + Synthetic Oils + Performance Additive Package + Food Registrations = Industrial Strength Performance & Productivity 1

Mobil SHC Polyrex Industrial Strength Performance Polyrex synthesized thickener Synthetic oil technology, ISO 460 & 220 Polymer enhanced Performance additive package Recommended operating temperature up to 170 C Food Processing Industry NSF H-1 Registration Kosher/Parve Certification Gluten, nut and wheat free Mobil SHC Polyrex 462 Mobil SHC Polyrex 222 Mobil SHC Polyrex 005 Heavy Duty Highest temperature range Low speed, high load applications ISO 460 synthetic oil Water and Corrosion Resistant Heavy Duty Most general bearing applications ISO 220 synthetic oil Water and Corrosion Resistant Wide temperature range Central Systems Centralized systems Gear box lubrication ISO 220 synthetic oil Low temperature mobility Controlled oil bleed Water and Corrosion Resistant 2

Mobil SHC Polyrex Properties Method Units Mobil SHC Polyrex 462 Mobil SHC Polyrex 222 Mobil SHC Polyrex 005 DIN 51825 -------- KPF2P-20 KPF2P-30 -------- DIN 51826 -------- -------- -------- GPF00K-30 Fundamental Properties FE9 DIN 51821 L50 Hours Typical Inspections 375 350 NA Penetration, 60 Stroke D 217 mm/10 271 275 415 Viscosity Index Calculated % 139 148 148 Base Oil Viscosity @ 40 C Base Oil Viscosity @ 100 C Calculated cst 460 220 220 Calculated cst 40 30 30 Dropping Point D 2265 C 268 260 ---- 3

High temperature FE9 test rig FAG FE9 Test Parameters: 5-Angular Contact Ball Bearings 6000 rpm, 1500 N Axial Load, Shielded L 50 statistic is calculated from the 5 bearings L 50 represents probability average of 50% of bearings meets or exceeds 100 hours of run time before failure Run increasing temperatures to L 50 > 100 hours Report as Temperature @ L 50 hours. The keys to high temperature lubrication: Slow release of oil to the load zone at high temperatures Oxidation stability 4

Options for higher temperatures Recommended Operating Temperature Range Mobil SHC Polyrex 462 Mobil SHC Polyrex 222 Mobilith SHC 220-40 -30-20 150 170 170 Mobil SHC Polyrex Offers a new option for high temperature lubrication Mobilgrease XHP 222-20 140-50(-46) 0(32) 50 100 150 200 (122) (212) (302) (392) Temperature C ( F) Low temperature limit based on DIN Flow Pressure Test, High Temperature limit recommendation based on FE9. Actual high temperature use must be verified by EHL calculations. 5

Options for higher temperatures High Temperature Performance: FE9 @ 160 0 C L50 (Hours) 450 400 350 300 250 200 150 100 50 0 FE9 repeatability bands for Mobil SHC Polyrex 462 7 13 22 A B C D E Mobil SHC Polyrex 462 Flying away from the competition in high temperature lubrication performance 34 Competitor A - E A = Aluminum Complex, NSF H-1 B = Calcium Sulfonate, NSF H-1 C = Calcium Sulfonate, NSF H-1 D = Clay, NSF H-1 E = Aluminum Complex, NSF H-1 Mobil SHC Polyrex 462 = Advanced Polyurea Thickener, NSF H-1 10 378 Standard FE9 Testing demonstrates Mobil SHC Polyrex exceeds competitive products in high temperature performance: - Longer bearing life - Reduced downtime For Increased Productivity 6

Reduce the Heat with Mobil SHC Polyrex Mobil SHC Polyrex 462 Mobil SHC Polyrex Synthetic Technology: In FE9 Bearing Rig Mobil SHC Polyrex shows 25% lower operating temperature helping to extend relubrication intervals Competitor Aluminum Complex 7

Dispensing capability Dispensing Rate (-18 C) * 45 40 35 More dispensing options available for cold process operations Grams/Minute 30 25 20 15 10 5 0 Mobilgrease XHP 005 Mobil SHC Polyrex 462 Mobil SHC Polyrex 222 Mobil SHC Polyrex 005 Mobil SHC Polyrex 005 Offers Superior Dispensability even at low temperatures - Less distribution system maintenance - Reliable grease delivery 8 * Flow Properties of Grease at Low Temperature, USS DM-43.

Proven Performance - Food Mobil SHC Polyrex 462 provides $23,000 annual cost savings in a sugar beet processing plant Benefit NSF H-1 registered Mobil SHC Polyrex 462 grease enables a sugar beet processing plant to save annually $23,000 in spare part and maintenance costs. Situation The product used to lubricate the critical components of a steam dryer at continuously high temperatures of 150 C (302 F) in a humid environment was leading to excessive wear on sluice jaws and lubricating rings due to uncontrolled oil bleeding. Grease stiffening was causing a malfunction of magnetic valves of the centralized grease system. Impact Mobil SHC Polyrex 462 was used during an intense sugar campaign period. Inspection of the critical components showed no evidence of wear. The grease maintained its consistency resulting in flawless operation of the centralized grease system. Mobil SHC Polyrex 462 was the only NSF-H1 registered grease which performed under these severe conditions. 9

Proven Performance - Paper Supercalender profile roll stack running at 360 rpm & 110 C (230 F). Competitive grease (ISO 1500 synthetic) not providing adequate lubrication. Oil separation observed during service. Bearing life experienced < 1 year. Mobil SHC Polyrex 462 tested, bearing inspection performed at 1 year. Grease inspection showed no detectable oxidation, bearings showed no signs of wear. 10

Proven Performance - Paper Paper machine dryer felt roll bearings only accessible for relubrication every six weeks. Temperatures > 93 C. Testing of Mobil SHC Polyrex 462 vs. Mobilith SHC PM & Shell Stamina HDS. Mobil SHC Polyrex 462 maintained consistency, less hardening over six week cycle vs. the other products. 11

Proven Performance - Plastic Film extrusion MDO section steam heated rolls. Bearing operating temperature 135 C (275 F). Speeds 45 240 rpm define mixed boundary/ehl conditions at these temperatures. Mobil SHC Polyrex 462 follow-up inspections showed no oil separation, no hardening and no deposits Mobil SHC Polyrex 462 gave equivalent performance to a specialty niche high temperature product. 12

Proven Performance - Cement Exhaust fan shaft bearings, 2500 rpm & 100 C. Historical failure rate was every 4-6 months. Previous lithium complex grease showed hardening and oxidation after failure. Mobil SHC Polyrex 462 extended bearing life to 12 months, reaching a planned shutdown and maintenance. 13

Proven Performance - Cement Drive & head bearings experience high level of clinker dust contamination. Dust ingress caused higher bearing operating temperatures, increased vibration, leading to a 6 8 month bearing life. Mobilith SHC 460 did not improve bearing life, becoming stiff and unable to lubricate. Mobil SHC Polyrex 462 tested for 10 months before inspection. Operating temperatures and vibration signatures were normal. Grease consistency, although contaminated, showed no hardening. Bearing condition looked good. 14

Field Application Summary Mobil SHC Polyrex: high temperature lubrication recommended up to 170 C Mobil SHC Polyrex 462 was successfully field tested in the following applications: Supercalender 110 C Dryer felt roll bearings >93 C Exhaust blower 100 C (210 F) Clinker elevator Dust contamination Film extrusion, steam heated rolls 135 C Fluidized bed steam heated dryer 150 C These field tests have been documented and are available for use 15

Distributor Flash Deck Summary Mobil SHC Polyrex 462, 222, 005: Industrial strength lubrication performance Food safe lubrication of food processing equipment High temperature lubrication recommended up to 170 C Low temperature dispensing recommended down to -20 to -30 C Proven performance in general industry and food processing applications 16

Mobil SHC Polyrex Industrial Strength Performance Advanced polyurea thickener Synthetic oil technology, ISO 460 & 220 Polymer enhanced Performance additive package Recommended operating temperature up to 170 C Food Processing Industry NSF H-1 Registration Kosher/Parve Certification Gluten, nut and wheat free Recommended operating temps up to 170 C Kiln/oven exhaust fans Plastic extruder/calendar bearings Paper machine felt rolls, under hood applications Paint/laminating ovens Mobil SHC Polyrex 005 in centralized systems OSB/MDF press grease All bearings above and below processing line Dryers Ovens Steam heated rolls Extruders Steam/oil heated mixing equipment Mobil SHC Polyrex 005 in centralized systems Mobil SHC Polyrex 005 leaky gear box 17

Veronafiere ottobre 2015