The NEW STANDARD in Performance

The NEW STANDARD in Performance 2016 PRODUCT CATALOG

STARFIRE Premium Products provides exactly what today s distributor and customer need a complete, diversified line of premium quality products and packaging options to satisfy their applications and provide considerable cost savings over comparable branded products. This philosophy has not only enabled STARFIRE to grow into one of the fastest growing brands of lubricants, antifreeze and chemicals, but has also created one of the most loyal networks of distributors and customers. STARFIRE premium quality lubricants, coolants & chemicals are considerably less expensive than the branded products on the market. STARFIRE Premium Products are formulated to meet or exceed the latest specifications for their respective applications. As always, all of these products are available in bulk options pails, drums, totes and bulk transports, delivered nationwide! If we can t save you money and increase your bottom line, with the highest quality products, then we don t deserve your business! Kurt Deimer President/CEO

Contents Premium Motor Oils 3 Synthetic Blend Motor Oils 4 Full Synthetic Motor Oils 5 dexos 1 Full Synthetic Motor Oils 6 High Mileage Motor Oils 7 Performance 20W50 8 Full Synthetic Multi-Vehicle ATF 9 MERCON V ATF 10 DEXRON -VI Low Viscosity ATF 11 ATF+4 ATF 11 Multi-Purpose ATF DEXRON III/MERCON 12 Type F ATF 12 Full Synthetic CVT Fluid 13 6-Gallon Eco-Box & Dispensing System 14 Synthetic Blend 15W40 Engine Oil 15 HD30 Heavy Duty Motor Oil 16 Full Synthetic Gear Lubricants 17 Conventional Gear Lubricants 18 GL-1 SAE 90 Gear Lubricant 18 Non-Detergent Motor Oils 19 AW Hydraulic Oils 20 R&O Oil 20 Premium J20C Tractor Hydraulic Fluid 21 Universal Tractor Hydraulic & Transmission Fluid 22 Conventional Green Antifreeze/Coolant 23 All Makes All Models Antifreeze/Coolant 24 Purecool Extended Life Antifreeze/Coolant 25 Purefleet SCA Precharged Antifreeze/Coolant 26 Purefleet Heavy Duty ELC Antifreeze/Coolant 27 Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant 28 Brake Fluid 29 Power Steering Fluid 29 Rv & Marine Antifreeze (-50 F) 30 Windshield Washer Fluid 30 Supertack Bar & Chain Oil 30 Blue Panther DEF 31 Low VOC Brake/Parts Cleaner 32 Starting Fluid 32 Hi-Temp Red/Multi-Purpose EP2 Grease 33 Multi-Purpose EP2 Grease 33 3% MOLY EP2 Grease 34 TC-W3 Premium 2-Cycle Engine Oil 35

Premium Motor Oils STARFIRE PREMIUM MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. They are formulated with the highest quality, hydrotreated, paraffinic lubricating oils and a technologically advanced additive system, which includes detergents, dispersants, viscosity improver, anti-wear and anti-friction agents, and oxidation and corrosion inhibitors. When API licensed SN, SM, SL oils are required When ILSAC GF-5, GF-4, etc. are required (5W-20, 5W-30, 10W-30) Meet or exceed the latest manufacturer s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. Excellent Fuel Economy Reduced friction for excellent protection against engine wear High resistance to viscosity and thermal breakdown Excellent anti-wear, anti-foam, bearing corrosion and anti-rust protection Fights volatility burn-off to minimize engine deposits and exhaust emissions SAE GRADE 5W-20 5W-30 10W-30 10W-40 51.33 8.73 63.51 10.78 63.85 10.35 Viscosity Index 149 161 150 157 94.59 14.34 Specific Gravity @ 60 F (15.6 C) 0.863 0.858 0.863 0.865 Gravity, API 32.37 33.4 32.37 31.99 Once this product is on your shelf, your customers will begin to ask for it by name. Ray Wood, STARFIRE Distributor (OH) Pour Point, F -49-49 -44-44 Flash Point (PMCC), C 403 399 403 406 CCS Viscosity, cp 6305 (-30 C) 5900 (-30 C) 4000 (-25 C) 4750 (-25 C) Noack Volatility 14.8 14.6 14.5 11.7 ILSAC GF-5 Certified YES YES YES NO 3

Synthetic Blend Motor Oils STARFIRE SYNTHETIC BLEND MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. They are formulated from selected highly refined paraffinic base oils, synthetic base oils and carefully selected advanced additive technology to provide superior thermal and oxidation stability, corrosion and valve train wear protection and prevent the formation and accumulation of deposits and sludge. When API licensed SN, SM, SL, SJ, SH, SG, SF, SE, SD or SC oils are required When ILSAC GF-5, GF-4, etc. are required (5W-20, 5W-30, 10W-30) Starfire 5W-20 can be used when Ford WSS-M2C945-A is specified Starfire 5W-30 can be used when Ford WSS-M2C946-A or Chrysler MS-6395S is specified Meet or exceed the latest manufacturer s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment. Excellent Fuel Economy Superior Synthetic Blend Protection against thermal breakdown Excellent protection from deposits at all operating temperatures Excellent cold-cranking capabilities Excellent anti-wear, anti-foam, bearing corrosion and anti-rust protection SAE GRADE 5W-20 5W-30 10W-30 10W-40 51.33 8.73 63.51 10.78 75.28 10.17 89.75 13.07 Viscosity Index 149 161 142 145 Specific Gravity @ 60 F (15.6 C) 0.86 0.858 0.868 0.871 Gravity, API 32.37 33.4 31.42 30.86 Pour Point, F -49-49 -44-44 Flash Point (PMCC), C 403 399 403 410 CCS Viscosity, cp 6305 (-30 C) 5900 (-30 C) 5050 (-25 C) 6032 (-25 C) Noack Volatility 14.8 14.6 14.4 11.7 API: RC *Resource Conserving* YES YES YES NO ILSAC GF-5 Certified YES YES YES NO 4

Full Synthetic Motor Oils STARFIRE FULL SYNTHETIC MOTOR OILS are premium quality 100% synthetic motor oils formulated from superior synthetic base oils and carefully selected advanced additive technology. Starfire full synthetic motor oils can be used in virtually all service classifications for gasoline engines domestic and foreign and are fully compatible with all other synthetic and petroleum based motor oils. When API SN and SN-RC and ILSAC GF-5 are required Can be used in virtually all service classifications for gasoline engines domestic and foreign Fully compatible with all other synthetic and petroleum based motor oils. 100% synthetic motor oil Excellent Fuel Economy Superior Protection against thermal breakdown Excellent protection from deposits at all operating temperatures Excellent cold-cranking capabilities Excellent anti-wear, anti-foam, bearing corrosion and antirust protection Excellent cold-cranking capabilities SAE GRADE 0W-20 5W-20 5W-30 10W-30 43 8.27 50.93 8.83 63.95 10.93 Viscosity Index 171 153 163 151 Pour Point, F -49-49 -49-44 Flash Point (COC), F 399 428 431 410 61.71 10.14 Specific Gravity @ 60 F (15.6 C) 0.848 0.852 0.854 0.855 Gravity, API 35.36 34.54 34.15 33.86 CCS Viscosity, cp 5300 (-35 C) 5226 (-30 C) 5100 (-30 C) 3884 (-25 C) Noack Volatility 12.6 10.9 10.5 8.2 5

dexos 1 Full Synthetic Motor Oils STARFIRE dexos 1 FULL SYNTHETIC MOTOR OILS are state of the art, advanced technology motor oils formulated with sophisticated additives to prevent sludge formation commonly caused by moisture and combustion byproducts. An exceptionally high viscosity index minimizes cold weather oil thickening, preventing battery drain and engine wear, even at subzero startups. Exceeds GM dexos1 specifications for world-wide warranty requirements for all GM automotive gasoline engines currently in use. STARFIRE dexos 1 Full Synthetic Motor Oils are for use in all Buick, Chevrolet, Cadillac and GMC vehicles starting in 2011 model year. They are also an excellent choice for previous model year vehicles produced by GM. They are recommended and suitable for use in all passenger cars, sports utility vehicles and light duty trucks operating on gasoline specifying API service category SN, SM, ILSAC GF- 5, GF-4, Chrysler MS-6395M, Ford M2C930-A (5W-20) and Ford M2C929-A (5W-30). Licensed and approved through General Motors (License # RB1D0425025) Fuel economy improvements Meets manufacturers latest warranty requirements Protection for high temperature, high performance turbocharged vehicles Enhanced rust protection for Flex Fuel Vehicles, specifically those that run on ethanol-based fuel (E85) TYPICAL PROPERTIES 0W20 5W-20 5W-30 Viscosity: cst at 40 C cst at100 C 42.31 8.06 50.93 8.835 63.95 10.93 Viscosity Index 167 153 163 Pour Point, F -54 F -49 F -49 F Gravity, API 34.74 34.54 34.15 Specific Gravity @ 60 F (15.6 C) 0.8512 0.8522 0.8542 CCS Viscosity, cp 5379 (-35 C) 5226 (-30 C) 5110 (-30 C) Noack Volatility 12.7 10.9 10.5 Color 2.5 2.5 2.5 We have had great success with the STARFIRE line of products and quality they represent. We also like the fact they keep pushing their standards to bring more products on line to meet our customer s needs. John Boswell, STARFIRE Distributor (OH) 6

High Mileage Motor Oils STARFIRE HIGH MILEAGE MOTOR OILS are fully licensed motor oils that meet or exceed the latest manufacturer s requirements for use in passenger car, SUV and light duty truck gasoline engines. They are specially formulated for higher mileage vehicles those with 75,000 miles or more - to help protect worn seals, reduce oil loss and prevent leaks from forming. Starfire High Mileage Motor Oils are made with highly refined paraffinic base oils, advanced additive technology and special seal conditioners, to provide superior thermal and oxidation stability, anti-corrosion and valve train wear protection and prevent the formation and accumulation of deposits and sludge. Vehicles with 75,000 miles or more When API licensed SN, SM, SL oils are required Meet or exceed the latest manufacturer s requirements for use in passenger car, SUV and light duty truck gasoline engines, powerboats, motorcycles and other stationary and mobile equipment Special additives and seal conditioner for older vehicles Helps combat engine oil consumption Prevents leaks from forming Helps reduce oil loss caused by burn-off Superior protection against thermal breakdown Excellent protection from deposits at all operating temperatures Excellent anti-wear, anti-foam, bearing corrosion and anti-rust protection SAE GRADE 5W-20 5W-30 10W-30 51.3 8.73 63.51 10.78 75.28 10.17 Viscosity Index 149 161 142 Pour Point, F -49-49 -44 Flash Point (COC), F 403 399 403 Specific Gravity @ 60 F (15.6 C) 0.863 0.858 0.868 Gravity, API 32.37 33.4 31.42 CCS Viscosity, cp 6305 (-30 C) 5900 (-30 C) 4000 (-25 C) Noack Volatility 14.8 14.6 14.4 ILSAC GF-5 Certified YES YES YES 7

Performance 20W50 STARFIRE PERFORMANCE 20W50 MOTOR OIL is a race performance, premium quality oil formulated for gasoline engines. It contains only the highest quality, hydrotreated, paraffinic lubricating oils and a technologically advanced additive system, which includes detergents, dispersants, viscosity improver, anti-wear and anti-friction agents, and oxidation and corrosion inhibitors. STARFIRE 20w50 motor oil is acceptable for use in all domestic and foreign automotive gasoline-fueled passenger cars and light-duty trucks where an SAE 20w50 that meets API SN, SM or SL is specified. Superior Protection against thermal breakdown Excellent protection from deposits and sludge at all operating temperatures Excellent oxidation stability Excellent corrosion and valve train-wear protection TYPICAL PHYSICAL PROPERTIES: Viscosity Index 127 Pour Point, ºF -27 169.8 19 Flash Point (COC),ºF 406 Gravity, ºAPI 29.63 Specific Gravity @ 60ºF (15.6ºC) 0.878 Zn (ppm) 850 P (ppm) 770 Ca (ppm) 1900 CCS Viscosity, cp 4500 7014 (-15 ºC) Noack Volatility 5.1 8

Full Synthetic Multi-Vehicle ATF STARFIRE FULL SYNTHETIC MV ATF is a high performance multi-vehicle transmission fluid that is specially formulated for use in most high viscosity planetary gear transmission applications. STARFIRE Full Synthetic MV ATF is manufactured using premium synthetics and an additive package for superior protection from corrosion and wear as well as severe anti-shudder durability. STARFIRE Full Synthetic MV ATF is suitable for use in most passenger car and light truck applications including: Aisin Warner AW-1* Allison C-4 Allison C-3 Allison TES-295 Allison TES-389 AS 68 RC (T IV) Audi G 052 025 Audi G 052 162 Audi G 055 025 Audi 5HP LT 71141 (Audi G-052-162-A1 / A2) Audi 5HP (ZF 5 HP 30) Audi G-055-025-A2(JWS 3309) BMW ETL-7045, 7045E (83 22 0 026 922) BMW LA2634 BMW LT 71141 BMW 5 HP (ZF 5 HP 30) BMW 5 HP LT 71141 BMW MINI 83 22 0 402 413 9 (JWS 3309) Caterpillar Powershift TO-2 Chrysler ATFs Chrysler Mopar AS 68 RC (T IV) Daewoo LT 71141 DEXRON DEXRON -II, IID, IIE DEXRON -IIIF, IIIG, IIIH DEXRON VI* Esso LT 71141 Fiat, Typo T IV Ford FNR5 Ford MERCON (XT-2-QDR, XT-2-QSM SYN) Ford MERCON V TYPICAL PROPERTIES 33.64 7.41 Gravity, API 34.66 Specific Gravity @ 60 F 0.8516 Viscosity Index 196 Brookfield Viscosity at -40 C, cp 10,300 Flash Point (PMCC), ºC >170 Pour Point,, ºF -60 Appearance/Color Ford WSS M2C 922 A1, 924-A (XT-8-QAW) (JWS 3309) GM Type A GM T IV Honda DW-1 Honda ATF-Z1 Hyundai/Kia Red 1, SP-II, III Hyundai/Kia SP-IV* Hyundai NWS-9638* Idemitsu K17 Isuzu Bescom ATF II, III Jaguar ATF 3403 M115 Jaguar LT 71141 JASO 1-A JWS 3309 (T IV) JWS 3324 (WS)* MAN 339F MAN 339 V1 MAN 339 V2 MAN 339 Z1 MAN 339 Z2 Mazda ATF-M III Mazda ATF-M V Mercedes Benz 236.1 Mercedes Benz 236.2 Mercedes Benz 236.5 Mercedes Benz 236.6 Mercedes Benz 236.7 Mercedes Benz 236.9 Mercedes Benz 236.10 Mercedes Benz 236.11 Mitsubishi SP-II, SP-III, SP IV, J2 NAG 1 (Jeep Cherokee) Nissan 402 Nissan Matic-D, J, K Nissan Matic-S* Porsche ATF 3403 M115 Porsche LT 71141 Saab T IV Saturn T IV Scion (All Vehicles) Shell 3403, M115 Shell LA2634 Subaru ATF, ATF-HP Suzuki ATF 3309 Texaco ETL-7045E Texaco ETL-8072B Texaco N402 Toyota T-III & T-IV Toyota WS (JWS 3324)* Voith 55.6335.XX (G607) Voith 55.6336.XX (G1363) Volvo 97340 Volvo 97341 VW G 052 025 VW G 052 162 VW G 052 099 VW G 055 025 VW 5HP LT 71141 (Audi G-052-162-A1 / A2) VW 5HP (ZF 5 HP 30) ZF TE-ML 03D, 04D, 05L, 09, 11B, 14A, 16L, 17C ZF TE-ML 14B ZF 5 HP 18FL / 19FL / 24A *Vis requirement not met Red We have been using STARFIRE as our lead lubricant brand for 1½ years. STARFIRE has always offered a great product selection, competitive prices, with outstanding service. Greg Davidson, STARFIRE Distributor (AL) 9

MERCON V ATF STARFIRE MERCON V ATF is specially formulated with a unique combination of conventional base stocks and advanced additive technology to meet performance requirements of Ford automatic transmissions calling for MERCON V fluid. Not for use in transmissions requiring Ford Type F fluid or Continuous Variable Transmissions (CVTs). Licensed by Ford Motor Co., Inc. License # M5141201. STARFIRE MERCON V ATF is suitable for use where the following automatic transmission fluids are recommended: automobile and truck automatic transmissions, power-shift transmissions and other types of service requiring an approved and Ford Mercon V automatic transmission fluid. Dexron -III (G, H), II (E, F) specifications, Honda Z-1, Nissan Matic-J and Toyota T-IV. CLAIMS INFORMATION Allison C-4*** Allison TES-389* Audi G 052 025, 052 162, 055 025* Esso 71141* BMW P/N 83 22 0 024 359, ETL-8072B* BMW P/N 83 22 0 0246 922, ETL-7045E* BMW P/N 83 22 0 403 249, ETL-8072B* BMW P/N 83 22 9 407 765, LA 2634* BMW P/N 83 22 9 407 807, LT 711 41* BMW 7045E, LA2634, LT71141* Dexron III G/H, Dexron II, Dexron, AW1* Honda DW-1, Z-1* Volvo P/N 1161540-8* Hyundai/Kia/Mitsubishi Diamond SP-II and SP-III, RED-1, SP-IV* Chrysler AS68RC, Diamond SP-III* Idemitsu K17* JWS 3309, Any 3309* M315-2004 JASO 1A, 2A*** MAN 339 Type Z1, Z2, V1** Mazda ATF M-III, MV, T-IV* MB236.1,2,5,6,7,9, 10, 11* Suzuki 3314, 3317* Ford P/N XT-2-DX (MERC), Ford P/ N XT-2-SM (SYN MERC)* Mercon V (XT-5-QM,XT-5-DM)*** Mercon, Ford ESP-M2C166-H* Nissan Matic-D, J, K, 402* Texaco N402* Shell 3403, LA2634, Texaco 7045-E, ETL-8072B* Hyundai NSWS9638* Fuchs 3353* IDEMITSU APOROIL ATF HP* ISUZU 08200-9001 / Genuine ATF* MINI P/N 83 22 0 402 413* Saturn P/N 21005966* SAAB P/N 22 717 466, 93 165 147 (AW-1)* Jaguar P/N WSS-M2C922-A-1* Porsche P/N 999 917 547 00 (A2)* VW P/N GUS 000 162* Shell ATF 134, 3353, 3403 M115* Subaru ATF, ATF-HP* Toyota T-II, T-III, T-IV, WS, Ford XT8QAW* Saturn T-IV, GM TASA, T-IV ATF, GM WS ATF* JWS 3324* Voith 55.6335 (G607)* Volvo Passenger Car (4 6 sp), Volvo 97340, 97341)* VW G 052 025, 162, 099, 055 025* ZF TE-ML 03D, 04D, 05L, 09, 11B, 14A, 16L, 17C, ZF TE-ML 14B * Suitable for Use ** Meets Requirements *** Approved TYPICAL PROPERTIES 35.43 7.56 cp @ -40 C, max. 13000 Viscosity Index, min. 189 Flash, COC, F 390 Pour Point,, F -60 Specific Gravity @ 60 F 0.8601 API Gravity 33.02 Color Red 10

DEXRON -VI Low Viscosity ATF STARFIRE DEXRON -VI LOW VISCOSITY AUTOMATIC TRANSMISSION FLUID is a full synthetic, high quality fluid designed to meet the specific requirements of General Motors automatic transmissions calling for DEXRON -VI fluid. This high-quality product is also suitable for use where DEXRON -II, DEXRON -III, JASO M315(1A), Mercon SP, Toyota WS, or Toyota T-IV fluids are recommended. Full Synthetic GM Approved Protection against wear and transmission shudder Resistance to thickening due to high temperatures Friction stability to maintain smooth consistent shift performance TYPICAL PROPERTIES 28.56 5.797 Viscosity Index 151 Pour Point, F -60 Specific Gravity @ 60 F (15.6 C) 0.8468 Gravity, API 35.6 Color Red ATF+4 ATF STARFIRE ATF+4 AUTOMATIC TRANSMISSION FLUID is a uniquely blended, full synthetic fluid designed to meet the specific requirements of Chrysler and FCA automatic transmissions/transaxles specifying MS-9602, MS-7176, ATF+, ATF+2, ATF+3, or ATF+4 fluids. Full Synthetic Excellent high and low temperature protection Resistance to thickening due to high temperatures Friction stability to maintain smooth consistent shift performance TYPICAL PROPERTIES 35.22 7.68 Viscosity Index 201 Pour Point, F -54 Specific Gravity @ 60 F (15.6 C) 0.8508 Gravity, API 34.81 Color Red 11

Multi-Purpose ATF DEXRON III/MERCON STARFIRE ATF DEXRON III/MERCON is a multipurpose automatic transmission fluid especially designed to meet the service requirements of a wide variety of applications. STARFIRE ATF DEXRON/MERCON is designed for newer generation, electronically controlled transmissions. DEXRON III H, DEXRON III G, DEXRON IIE, MERCON, or Type A Suffix A MERCON, M2C138-CJ or M2C 166-H Fluids When Allison C-4 Fluids and Caterpillar TO-2 Fluids In Chrysler transmissions except where Chrysler MS-9602, MS-7176 or ATF+4 are required In all 1979 thru 2005 transmissions built by Ford (exceptions: Ford FMX and pre-1980 C-4 transmissions and where Mercon V is required) Superior cold temperature performance characteristics Wide range of seal compatibility Excellent wear protection and oxidation resistance Fortified against rust and corrosion Meets requirements for foam protection Superior frictional characteristics with excellent friction retention and smooth shifting Type F ATF STARFIRE TYPE F ATF is specially formulated using high quality lubricating oils and a technologically advanced additive system. Engineered to extend transmission life and smooth operation of Ford automatic transmissions not requiring MERCON or DEXRON type fluid. Type F fluid is approved for all Ford automatic transmissions built prior to 1977 and certain models for years 1977 through 1980. Meets Ford specification for high static friction fluid and all warranty requirements for transmissions recommending a Type F fluid. For use where Ford M2C-33F, M2C-33G and Ford Type F fluids are recommended Excellent high and low temperature protection Stable friction properties for smooth and consistent shifting Excellent sheer stability Outstanding resistance to wear, oxidation and varnish deposits TYPICAL PROPERTIES Viscosity Index 167 Pour Point, F -60 38.11 7.47 Specific Gravity @ 60 F (15.6 C) 0.8619 Gravity, API 32.67 Color TYPICAL PROPERTIES Red 35.67 7.38 Viscosity Index 179 Pour Point, F -60 Specific Gravity @ 60 F (15.6 C) 0.86 Gravity, API 32.98 Brookfield Viscosity @ -40 C, cp 18,500 Color Red 12

Full Synthetic CVT Fluid STARFIRE CHAIN & BELT FULL SYNTHETIC CVT FLUID is specially formulated with a unique combination of full synthetic base stocks and an advanced additive technology designed for the specific demands of CVTs. This premium-quality product is recommended for use in most belt or chain driven Continuously Variable Transmissions and it is not a replacement for ATF. Starfire Chain & Belt Full Synthetic CVT Fluid is suitable for use in the following applications: Audi/VW (TL 52180; G 052 180) Ford (CVT30 / Mercon C) Honda (HMMF) Toyota (TC) Nissan (NS1, NS-2) Mitsubishi (CVTF-J1 / SP-III) Subaru (NS-2 / Lineartronic CVTF) Mini Cooper (EZL 799A) Hyundai Genuine CVTF Hyundai / Kia (SP-III) Suzuki (TC / NS-2 / CVT Green 1) Dodge / Jeep (NS-2 / CVTF+4) GM/Saturn (DEX-CVT) Ford (CVT23) Toyota (TC) Mercedes Benz (236.20) TYPICAL PROPERTIES Viscosity Index 185 Pour Point, F -60 33.8 7.21 Specific Gravity @ 60 F (15.6 C) 0.8538 Gravity, API 34.23 Color Amber 13

6-Gallon Eco-Box & Dispensing System STARFIRE 6-GALLON ECO-BOX & DISPENSING SYSTEM is an innovative design that provides professional installers with a cost- effective alternative for offering a wider variety of STARFIRE motor oils and fluids. Installers can now inventory up to six different products in the same floor space as a single 55-gallon drum. The innovative Eco-Box design reduces environmental impact by reducing discarded plastic packaging by as much as 85% when compared to quart packaging. The flexible bag-in-box design also provides a significant reduction in residual oil that would normally be left in conventional plastic packing, so there is less wasted product! Space-saving rack dispensing system Up to 6 different products in the space of a single 55-gallon drum Inventory cost savings Environmentally friendly packaging reduces plastic waste Reduces product residual waste STARFIRE ECO-BOXES ARE AVAILABLE IN: FULL SYNTHETIC MOTOR OIL 0W-20 dexos 1 5W-20 dexos 1 5W-30 dexos 1 10W-30 SYNTHETIC BLEND MOTOR OIL 5W-20 5W-30 10W-30 AUTOMATIC TRANSMISSION FLUID Multi-Purpose ATF Dexron III/Mercon Full Synthetic Multi-Vehicle ATF 14

Synthetic Blend 15W40 Engine Oil STARFIRE SYNTHETIC BLEND 15W40 ENGINE OIL is specially engineered for heavy duty diesel and gasoline engines operating under all service conditions, including today s emission controlled engines with EGR and diesel particulate filters using Ultra-Low Sulfur Diesel fuel (<15 PPM Sulfur) (ULSD) and Low Sulfur Diesel (LSD). Starfire Synthetic Blend Engine Oil meets or exceeds performance requirements for all heavy duty gas and diesel engines currently in use where a SAE 15W-40 that meets API CJ-4/SN is specified. RECOMMENDATIONS Mack EO-O Premium Plus 07 Volvo VDS-4 DDC Power Guard GLOBAL DHD-1 Detroit Diesel 93K218 Cummins CES 20081, 20077, 20076 Renault RLD-3 Caterpillar ECF-1a, ECF-2, ECF-3 Mack EO-N Premium Plus 03, Mack EO-N Premium Plus, EO-M Plus, EO-M Mercedes Benz 228.3 Man 3275, DDC/MTU Series 2000/4000 category 1 and 2 engine performance Volvo VDS-4, VDS-3, DHD-1 ACEA E9-08, E7-04, E5 and E3 JASO DH-2 Allison C-4 Caterpillar TO-2 PRODUCT DATA TEST METHOD TYPICAL D445 Viscosity Index D2270 142 115 15.5 Pour Point, C ( F) D97-40 (-40) Flash Point C ( F) D92 238 (460) Neutralization No., TBN-E D2896 10 Sulfated Ash, wt.% D874 1.0 Cold Crank Simulator, cp D5293 6210/-20 C Mini-Rotary Viscometer TP1, cp D4684 19700/-25 C HTHS @ 150 C, cp D4683 4.2 15

HD30 Heavy Duty Motor Oil Starfire HD30 Heavy Duty Motor Oil is formulated with high viscosity index paraffinic base oils and select additive technology to provide superior thermal and oxidative stability, corrosion and valve train wear protection and prevent the formation and accumulation of deposits and sludge. It is designed for modern day, heavy duty diesel engines operating in both highway and off-highway applications. STARFIRE HD30 Heavy Duty Motor Oils are recommended for modern day, heavy duty diesel and gasoline engines. It meets or exceeds the API CF-2 and CF/SG Service classifications. Excellent protection from deposits at all operating temperatures Excellent bearing corrosion protection (EGR critical) Excellent anti-wear properties Excellent anti-foam properties Excellent anti-rust properties Excellent soot control TYPICAL PROPERTIES SAE Grade 30 91.05 10.91 Viscosity Index 105 Pour Point, F -22 Specific Gravity @ 60 F 0.876 Gravity, API 30.03 Coolants Plus has distinguished themselves and left a positive mark on our company with their STARFIRE line of products. The STARFIRE product line has been a perfect fit for us, a top tier quality product but at a great price point. Matt Berman, STARFIRE Distributor (NJ) 16

Full Synthetic Gear Lubricants STARFIRE FULL SYNTHETIC GL-5 GEAR LUBRICANTS are multi-purpose lubricants designed for service in automotive and heavy duty applications. Starfire Full Synthetic GL-5 Gear Lubricants are formulated with synthetic base stocks and a sulfur-phosphorus extreme pressure additive package with friction modifier, which provides excellent thermal and oxidative stability, as well as anti-foam, anti-rust and anti-corrosion protection and have excellent load carrying capabilities. API GL-5, GL-4 Service Designations as well as the MIL- PRF-2105D and MIL PRF 2105E and is suitable for use in limited slip differentials. Mack GO-H & GO-J and Proposed PG-1/PG-2 Service Designations, Scania STO 110, Meritor -076N (75W90), and Meritor -076M (80W140) For use when extreme pressure (EP) gear oils are required: In all heavy duty truck differentials - In all domestic automobile differentials and some manually shifted transmissions- In heavy duty manually shifted truck transmissions requiring API MT 1 performance - In oil lubricated wheel bearings. Provides excellent protection against wear under extreme pressure and high torque operation High resistance to thermal breakdown Helps prevent foaming, rust, and corrosion Smooths and quiets operation TYPICAL TEST DATA 75W-90 75W-140 80w140 50w 94.5 16.7 168.2 27.1 182.1 26.5 Viscosity Index 192 199 181 185 Pour Point, 60 F -36-47 -20-44 103.50 17.4 Flash Point, (COC), F 468 478 493 455 API Gravity @ 60 F 34.2 34.6 32.7 35.1 Specific Gravity, 60 F 0.854 0.852 0.862 0.849 17

Conventional Gear Lubricants STARFIRE GL-5 GEAR LUBRICANTS are multi-purpose lubricants designed for service in automotive and heavy duty applications. They are formulated with refined paraffinic base stocks and a sulfur-phosphorus extreme pressure additive package, which provides excellent thermal and oxidative stability, as well as anti-foam, antirust and anti-corrosion protection, and has excellent load carrying capabilities. Note: These products are not approved for Eaton Roadranger and ArvinMeritor Extended Warranties. STARFIRE GL-5 Gear Lubricant meets the API GL-5, GL-4 Service Designations as well as the MIL-L-2105D and MIL Prf 2105E and is suitable for use in limited slip differentials STARFIRE GL-5 Gear Lubricant is also suitable for use in Mack GO-H & GO-J and Proposed PG-1/PG-2 Service Designations, Scania STO 110, Meritor -076D (80W90), and Meritor -076A (85W140), MAN 342 M2 (160,000 km), and MB 235.80 STARFIRE GL-5 Gear Lubricant meets API MT 1. For use when extreme pressure (EP) gear oils are required: In all heavy duty truck differentials - In all domestic automobile differentials and some manually shifted transmissions - in heavy duty manually shifted truck transmissions requiring API MT 1 performance In oil-lubricated wheel bearings TYPICAL TEST DATA 80W-90 85W140 174 18.2 Viscosity Index 116 91 462 29.4 Flash Point, COC, C (F ) 218 (424) 218 (424) Density, lbs/gal at 60 F 7.47 7.58 Gravity, API, 60 F 26.3 24 GL-1 SAE 90 STARFIRE GL-1 SAE 90 is manufactured with high quality base stocks to provide outstanding oxidation stability for long service life. This oil is inhibited against foaming and does not contribute to corrosion or wear of yellow metals, such as brass or bronze. STARFIRE GL-1 SAE 90 is designed for use in manual transmissions and transfer cases in on-highway trucks and off-highway equipment, which require an API GL-1 gear lubricant. It is also suitable for use in industrial gear oil applications that call for a straight mineral oil in the SAE 50 engine oil viscosity weight range. Long service life Non-foaming Non-corrosive (The SAE 50 engine oil viscosity grade is approximately equal to the SAE 90 gear oil viscosity grade). TYPICAL PROPERTIES SAE Grade 90 97.14 16.42 Viscosity Index 184 Flash Point, ºF 392 Pour Point, ºC (ºF) -42 (-43) Density @ 60 ºF 7.23 Color 1.0 18

Non-Detergent Motor Oils STARFIRE NON-DETERGENT (ND) MOTOR OILS are manufactured using highly refined base oils for increased lubrication and wear protection in operating conditions which do not require a detergent motor oil. Starfire Non- Detergent Motor Oils are recommended for light engines that call for a non-additive motor oil, compressors, circulating oils and low pressure hydraulic systems. Starfire ND Motor Oils satisfy API SA performance. CAUTION: This oil is rated API SA. It contains no additives. It is not suitable for use in most gasoline-powered automotive engines built after 1930. Use in modern engines may cause unsatisfactory engine performance or equipment harm. Light engines calling for non-additive motor oil Compressors Circulating Oil Low pressure hydraulic systems Highly refined base stocks provide superior lubrication Superior anti-foam control Wide range of applications VISCOSITY GRADE SAE 10 SAE 20 SAE 30 SAE 40 24.71 4.64 42 6.08 143.8 10.98 Viscosity Index 103 85 38 48 145.7 15.31 Flash Point ºF 399 410 429 437 Specific Gravity @ 60ºF (15.6ºC) 0.8629 0.8823 0.9222 0.9173 Gravity, API 32.48 28.88 21.94 22.76 We want to thank all the folks with STARFIRE for the outstanding quality and service they provide us on a regular basis. Todd Hayes, STARFIRE Distributor (AL) 19

AW Hydraulic Oils STARFIRE AW HYDRAULIC OILS are high performance hydraulic fluids formulated from select base stocks and advanced additive technology to deliver ultimate equipment protection and extended operating life. STARFIRE AW Hydraulic Oils contain active anti-wear agents, anti-oxidation, anti-corrosion, anti-rust and anti-foam additive components. Recommended for hydraulic pumps and hydraulic and highpressure circulating systems requiring: Parker Hannifin (Denision) HF-O, HF-1, HF-2, & T6H2OC Eaton Vickers 35VQ25A Pump, M-2950-S, & I-286-S Cincinnati Milacron P-68, P-69, & P-70 or DIN 51524-2 Formulated with premium base stocks for added resistance to thermal breakdown Outstanding wear protection Excellent resistance to system rust and oil oxidation Maintains excellent water separating properties Excellent foam control and air release deliver consistent system operation ISO GRADE 32 46 68 31.8 5.5 Viscosity Index 95 95 95 Pour Point, C ( F) -32 (-25) -30 (-22) -29 (-20) Flash Point, C ( F) 200 (392) 200 (392) 210 (410) Gravity, API 29.0 28.5 28.0 Oxidation Hrs, ASTM D 943 >3000 >3000 >3000 Lbs./Gallon 7.2 7.2 7.2 R&O Oil STARFIRE R&O OIL is a high quality hydraulic oil developed as a general purpose rust, corrosion, and oxidation inhibited oil. It can be used for any application not requiring anti-wear or extreme pressure protection. This oil is formulated with premium quality, refined mid-range viscosity index base stocks and select additives to provide wear protection, water separation, and anti-foam properties. 45.9 6.9 68.0 7.7 / Excellent general purpose rust, corrosion, and oxidation inhibited hydraulic oil, when anti-wear or extreme pressure protection is not required. TYPICAL PROPERTIES Viscosity Index 44 32.0 4.85 Gravity, API 24.0 Color, ASTM <3.5 20

Premium J20C Tractor Hydraulic Fluid STARFIRE PREMIUM J20C TRACTOR HYDRAULIC FLUID is formulated with highly refined Group II base stocks for added resistance to thermal breakdown and utilizes the combination of special friction modifiers and shear-stable viscosity modifiers to offer optimum performance levels. STARFIRE Premium J20C Tractor Hydraulic Fluid is recommended for use in all major OEM equipment. STARFIRE Premium J20C Tractor Hydraulic Fluid is designed for use in a variety of farm equipment, off-highway machinery, industrial tractors, final drives, power take-off units, wet brakes, power steering units, and hydraulic systems. It provides the unique combination of ultimate equipment protection and the convenience of using one fluid in place of two or more fluids while maintaining optimum component performance and durability. Allison: C-4 John Deere: Quatrol, J20C, J20A, J21A, Hy-Gard J14B/C, Type 303 Fluid International Harvester: Hy-Tran, B-6 AGCO (Massey Ferguson): M-1145, M-1143, M-1110, M-1127B, M-1129A, M-1135 Permatran III, M-1138, M-1141, White Q-1826, & Allis Chalmers Power Fluid 821 XL, Duetz-Allis Hyd Trans Fluid, 25743, 272843, & AGCO-Allis J.I. Case: TFD (JIC-143/146), Hi-Vis (JIC-185), JIC-144/145, MS-1204, MS1205/1206/1207, MS-1210 (TCH) and B-6 Case New Holland: MAT 3505, MAT 3525, MAT 3526, ESN M2C86- A/B/C, M2C134-A/B/C/D, M2C41-B, M2C43, M2C53-A/B, M2C92-A Vickers: I-2986-S, 104C, & M2950S, Denison UTTO, HF-0, HF-01, HF-02 Kubota Universal Transdraulic Fluid: UTD & Super UTD Sundstrand Hydrostatic Transmissions: JDQ-84 Volvo: BM, VCE 1273.03 & WB-101 (wet brake) Caterpillar: TO-2 & MTO (Multi-Application Tractor Oil) for older backhoe loader rear axles and Challenger tractors Formulated with highly refined Group II base stocks for added resistance to thermal breakdown Superior wear protection to protect critical components Excellent frictional properties for smooth shifting Excellent anti-shudder performance Good seal compatibility Protection against varnish and sludge formation Superior thermal stability and oxidation resistance TYPICAL PROPERTIES Performance Level Viscosity Index 140 J20C 68.4 10.2 Pour Point, C ( F) -40 (-40) Flash Point, C ( F) 218 (424) API Gravity @ 60 F 29.7 Lbs. /gallon 7.2 21

Universal Tractor Hydraulic & Transmission Fluid STARFIRE UNIVERSAL TRACTOR HYDRAULIC & TRANSMISSION FLUID is formulated with highly refined base stocks for added resistance to thermal breakdown. It provides active anti-wear agents to protect critical transmission components and is field tested for proven performance. STARFIRE Universal Tractor Hydraulic & Transmission Fluid is designed for use in a variety of farm equipment, off-highway machinery, industrial tractors, final drives, power take-off units, wet brakes, power steering units, and hydraulic systems. It provides the convenience of using one fluid in place of two or more fluids while maintaining optimum component performance and durability. John Deere: J14B C, J20A, J20, Type 303 (not recommended for J20C applications) International Harvester: Hy-Tran Massey Ferguson: M-1110 Allis Chalmers: C-3 J.I. Case: JIC-143 Ford New Holland; ESN-M2C: 134B C Allison: C-3 Oliver White: Q-1722 Excellent wear protection Smooth clutch and PTO performance Excellent anti-shudder performance Good seal compatibility Protection against rust and oxidization Multi-purpose lubricant applications TYPICAL PROPERTIES Performance Level J20A (303) Viscosity Index 90 API Gravity @ 60 F 24.4 ASTM Color L2.0 Lbs. /gallon 7.2 51.5 7.0 22

Conventional Green Antifreeze/Coolant STARFIRE CONVENTIONAL GREEN ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based product which meets or exceeds ASTM requirements for use in cars, light duty and heavy duty trucks. For heavy duty applications, the use of Supplemental Coolant Additives (SCAs) is required. Its low silicate formula contains inhibitors to prevent rust and corrosion for all cooling system metals, including aluminum. A 50/50 mixture of STARFIRE Conventional Green Antifreeze/Coolant and water provides freeze protection to -34 F and raises boiling point to +265 F when a 15 lb. pressure cap in good condition is used. STARFIRE Conventional Green Antifreeze/Coolant when used as directed: Meets ASTM D 3306 Meets ASTM D 4985 Provides a low silicate formulation May be added to any conventional antifreeze/coolant Compatible with heavy duty diesel supplemental coolant additives (SCAs) Helps prevent freeze-ups, overheating, and boil-overs Protects aluminum and any other engine metals Available in concentrate and 50/50 prediluted formulas CONVENTIONAL GREEN TYPICAL VALUES ASTM METHOD Ash Content 1.5% by weight D1119 ph 50% by Vol. Solution 10.0 11.0 D1287 Reserve Alkalinity 5.5 D1121 Speci fic Gravity at 20/20 C Freezing Point 1.064 D1122-34 D1177 Boiling Point 227 F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Foam Test 50mL/2.0 sec. D1881 23

All Makes All Models Antifreeze/Coolant STARFIRE ALL MAKES ALL MODELS ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based product that is recommended, compatible, and formulated for use with ANY antifreeze/coolant in ANY vehicle with aluminum and other engine metals. This formula has a concentrated blend of premium long-lasting inhibitors, utilizing Organic Acid Technology (OAT) to provide extended life protection for cars and light duty trucks up to 5 years or 150,000 miles, when added to any extended life coolant. STARFIRE All Makes All Models Antifreeze/Coolant when used as directed: May be added to the antifreeze/coolant of ANY make and model of automobile and light duty truck on the road, foreign or domestic May be added to ANY color antifreeze/coolant Utilizes Organic Acid Inhibitor Technology (OAT) Protection up to 5 years/150,000 miles Helps prevent freeze-ups, overheating, and boil-overs Protects aluminum and ANY other engine metals Available in concentrate and 50/50 prediluted formulas ALL MAKES ALL MODELS TYPICAL VALUES ASTM METHOD Ash Content 0.6% by weight D1119 ph 50% by Vol. Solution 8.7 D1287 Reserve Alkalinity 1 D1121 Speci fic Gravity at 20/20 C 1.0687 D1122 Freezing Point -34 D1177 Boiling Point 226 F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Foam Test 50mL/1.0 sec. D1881 Color Yellow 24

Purecool Extended Life Antifreeze/Coolant STARFIRE PURECOOL EXTENDED LIFE ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based product that may be used in all GM vehicles that require DEX-COOL coolant, as well as other cars and light duty trucks with aluminum radiators. STARFIRE Purecool Extended Life Antifreeze/Coolant when used as directed: Meets GM6277M, ASTM D 3306 and ASTM D 4985 May be added to conventional antifreeze/coolant Protects aluminum and ANY other engine metals Meets GM and Ford performance specifications DEX-COOL is a registered trademark of GM Corporation Available in concentrate and 50/50 prediluted formulas PURECOOL TYPICAL VALUES ASTM METHOD Ash Content 1.5% by weight D1119 ph 50% by Vol. Solution 10.0 11.0 D1287 Reserve Alkalinity 2.4 D1121 Speci fic Gravity at 20/20 C Freezing Point Boiling Point Flash Point (Tag Open Cup) (70% by Volume Solution) 1.064 D1122-34 D1177 227 F D1120 None Foam Test 50mL/2.0 sec. D1881 Color Orange 25

Purefleet SCA Precharged Antifreeze/Coolant STARFIRE PUREFLEET SCA PRECHARGED ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based heavy duty product that is designed for use in ANY diesel-powered truck, farm, off-road, marine or gasoline engine with aluminum and other engine metals. A 50/50 mixture of STARFIRE Antifreeze/Coolant and water provides freeze protection to -34 F and raises boiling point to +265 F when a 15 lb. pressure cap in good condition is used. STARFIRE Purefleet SCA Precharged Antifreeze/Coolant is designed for use in all heavy duty cooling system applications, including truck, farm, off-road and/or marine engine. STARFIRE Purefleet SCA Precharged Antifreeze/Coolant when used as directed: Meets ASTM D 3306, D4985, ASTM D 6210 and TMC RP-329 Provides a low silicate, phosphate-free formulation for long-lasting inhibition and corrosion protection May be added to the antifreeze/coolant of ANY heavy duty application for any truck, farm, off-road and/or marine engine May be added to the antifreeze/coolant of ANY make and model of heavy duty engine on the road, foreign or domestic May be added to ANY conventional heavy duty antifreeze/ coolant* (color may change, but performance will not be affected) Available in concentrate and 50/50 prediluted formulas *Provides extended life protection and is compatible with other ELC and conventional heavy duty coolants (users must continue to add Extender or other supplemental coolant additive SCA based on treat rates recommended by the engine manufacturer. Dilution with conventional coolants will reduce extended life benefits). PUREFLEET HEAVY DUTY ELC TYPICAL VALUES ASTM METHOD Ash Content 0.3% max. D1119 ph 50% by Vol. Solution 10.4 D1287 Speci fic Gravity at 20/20 C Freezing Point Boiling Point 1.0714 D1122-34 D1177 227 F D1120 STARFIRE products performance meets or exceeds all the major brands at a price point that adds profit to your bottom line. Ray Wood, STARFIRE Distributor (OH) Flash Point (Tag Open Cup) (70% by Volume Solution) None Foam Test 65mL/2.0 sec. D1881 Color Fuchsia 26

Purefleet Heavy Duty ELC Antifreeze/Coolant STARFIRE PUREFLEET HEAVY DUTY ELC ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycol-based heavy duty product that is designed for use in ANY diesel-powered truck, farm, off-road, marine or gasoline engine with aluminum and other engine metals. A 50/50 mixture of STARFIRE Antifreeze/Coolant and water provides freeze protection to -34 F and raises boiling point to +265 F when a 15 lb. pressure cap in good condition is used. STARFIRE Purefleet Heavy Duty ELC Antifreeze/Coolant is designed for use in all heavy duty cooling system applications, including truck, farm, off-road and/or marine engine. It provides extended life protection up to 300,000 miles or 6,000 hours, when flushed and filled according to directions. STARFIRE Purefleet Heavy Duty ELC Antifreeze/Coolant when used as directed: Meets ASTM D 3306, D4985, ASTM D 6210 and TMC RP-329 Provides a silicate, phosphate and borate-free formulation for long-lasting inhibition and corrosion protection Protects aluminum and ANY other engine metals May be added to the antifreeze/coolant of ANY heavy duty application for any truck, farm, off-road and/or marine engine May be added to the antifreeze/coolant of ANY make and model of automobile and light duty truck on the road, foreign or domestic May be added to ANY color antifreeze/coolant (color may change, but performance will not be affected) Available in concentrate and 50/50 prediluted formulas PUREFLEET HEAVY DUTY ELC TYPICAL VALUES ASTM METHOD Ash Content 0.071% by weight D1119 ph 50% by Vol. Solution 8.7 D1287 Reserve Alkalinity 3.6 D1121 Speci fic Gravity at 20/20 C Freezing Point Boiling Point Flash Point (Tag Open Cup) (70% by Volume Solution) 1.0714 D1122-34 D1177 226 F D1120 None Foam Test 30mL/1.0 sec. D1881 Color Red 27

Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant STARFIRE PUREFLEET EXTREME HEAVY DUTY ELC ANTIFREEZE/COOLANT is a premium, virgin, ethylene glycolbased heavy duty antifreeze/coolant that contains a proprietary poly-organic/multi-organic acid technology inhibitor system that does not contain any phosphate, silicate, borate, nitrate or nitrite. It provides total cooling system protection for 600,000 on-road miles without the use of additive- containing coolant filters or supplemental coolant additives (SCAs). STARFIRE Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant is designed for use in all heavy duty cooling system applications, including truck, farm, off-road and/or marine engine. It provides extended life protection up to 600,000 miles when flushed and filled according to directions. STARFIRE Purefleet EXTREME Heavy Duty ELC Antifreeze/Coolant when used as directed: Meets ASTM D 3306, ASTM D 4985, ASTM D 6210 and TMC RP-329/330 Is compatible with all types of coolant technologies, including conventional inorganic acid salt formulations, straight organic acid (OAT) formulations, hybrid organic acid formulations (HOAT), nitrited HOAT formulations (NOAT) and other poly-organic acid formulations Does NOT contain any phosphate, silicate, borate, nitrate or nitrite Provides up to 600,000 miles of total cooling system protection Is suitable for passenger cars, vans, SUVs, light trucks, heavy duty fleet vehicles and many off-road applications such as stationary engine cooling systems Will provide superior corrosion protection for all cooling system metals, including aluminum, steel, cast iron, copper, brass and solder Available in concentrate and 50/50 prediluted formulas Meets the following OEM Specifications: GM 6277M Audi Ford ESE M97B44-A Saab 6901 599 Ford WSE M97B44-B Volvo 014 GS 17009 Ford WSS M97B44-D Caterpillar EC-1 Ford WSS-M97B54-A Caterpillar ELC (with the addition Ford WSS-M97B44-E1/E2 of molybdate per specification) Chrysler MS9769 John Deere H-5, H-24, A-1 to C-1 MTU MTL5048, MTL 5049 Toyota Porsche TL-774D Mitsubishi Honda HES D2009-75 Hyundai Mazda MEZ MW 121D Suzuki 0F02 Isuzu VW TL774F (G12), light violet VW G12 BMW Mercedes Blatt 325.0 & 325.2 PUREFLEET EXTREME HD ELC TYPICAL VALUES ASTM METHOD Ash Content 2.5% max D1119 ph 50% by Vol. Solution 7.5-9.0 D1287 Reserve Alkalinity None Specified D1121 Speci fic Gravity at 20/20 C 1.110-1.145 D1122 Freezing Point -34 D1177 Boiling Point 226 F D1120 Flash Point (Tag Open Cup) (70% by Volume Solution) None Foam Test 150mL/5.0 sec. max. D1881 Color Cummins CES14603 (as found in service bulletin 3666132-02) Detroit Diesel 7SE298; DDC Powercool Plus and DDC Powercool Plus 6000 Navistar CEMS B-44 Navistar/International B-1, Type III (CEMS B-1), with the addition of molybdate per specification PACCAR: Kenworth, Peterbilt Yellow 28

Brake Fluid STARFIRE BRAKE FLUIDS are glycol-based fluids formulated to give optimum performance, longer service and prevent corrosion in brake systems. STARFIRE Brake Fluids meet or exceed the high standards of performance and safety for DOT 3 and DOT 4 fluids. For all disc and drum brake systems, including ABS, in which a DOT 3 or DOT 4 fluid is recommended Complies with Federal Motor Vehicle Safety Standard (FMVSS) No. 516.116 Surpasses SAE Spec. J1703 (DOT 3), SAE Spec. J1704 and ISO 4925 (DOT 4) Minimum wet boiling point 284 F (140 C) TYPICAL PROPERTIES DOT 3 DOT 4 ERBP Wet ERBP 249 C 480 F 157 C 314 F 266 C 510 F 166 C 330 F Viscosity: cst @ -40 C 1150 1100 Power Steering Fluid STARFIRE POWER STEERING FLUID is a premium formulation using high quality lubricating base stocks and select additives. It provides optimum protection in power steering systems of both foreign and domestic automobiles. It controls seal swelling and protects pump parts against wear while providing the proper friction coefficient for proper system operation. STARFIRE Power Steering Fluid is suitable for use in most passenger car and light truck applications STARFIRE Power Steering Fluid is NOT recommended for systems where special fluids are specified, e.g., SAAB, Honda, Mercedes Benz, etc. Always check your owner s manual when choosing a power steering fluid TYPICAL PROPERTIES Viscosity Index 150 Brookfield @ -40ºC 32.25 6.25 22000 cp Flash Point (PMCC), ºC >160 Pour Point, ºC -48 Density, lbs/gal @60ºF 7.44 Appearance/Color Bright and Clear/ L1.5 29

Rv & Marine Antifreeze (-50 F) STARFIRE RV & MARINE ANTIFREEZE (-50 F) provides burst protection in potable water systems down to -50 F. STARFIRE RV & Marine Antifreeze is a specially permitted formula of denatured ethyl alcohol and propylene glycol. STARFIRE RV & Marine Antifreeze (-50 F) is an economical alternative for the winterization of campers, RVs, boats and summer homes. No mixing required Burst protection down to -50 F Non-toxic Safe for fresh water systems All ingredients are listed in the U.S. Federal Register (GRAS) Windshield Washer Fluid STARFIRE WINDSHIELD WASHER FLUID has been formulated to provide the additional freezing protection that water just cannot provide. STARFIRE Windshield Washer Fluid will protect to 20 F below zero (-20 F). STARFIRE Windshield Washer Fluid clears windshields of dirt, bug stains, frost and ice. Keeps windshields clean and improves visibility No mixing necessary Freeze protection to -20 F Harmless to car finishes Supertack Bar & Chain Oil STARFIRE SUPERTACK BAR & CHAIN OIL is a premium lubricant designed to prevent rusting and reduce wear and link breakage, thus extending bar and chain life. The SuperTack tacifier formula provides maximum resistance to dropping and throw-off, even at the highest speeds. Its high viscosity index make it an excellent choice for commercial bar and chain applications. Commercial Logging Operations Professional Tree Trimming Services Professional Clearing Operations Homeowners Seeking Premium Grade Protection Two viscosity grades provide excellent year-round protection and performance SuperTack additive resists throw-off at highest speeds Prevents rust and reduces wear and link breakage Superior protection and performance for commercial and home applications TYPICAL PROPERTIES SUMMER GRADE WINTER GRADE 43.2086 10.67 37.73 8.71 Viscosity Index >240 >220 Pour Point, F -65 of -70 of Flash, (PMCC) F >392 >392 Specific Gravity @ 60 F 0.8830 0.8826 30

Blue Panther DEF BLUE PANTHER DEF is a mixture of 32.5% high purity urea and 67.5% deionized water that is used in Selective Catalytic Reduction (SCR) systems on diesel engines. DEF is the primary ingredient used to help convert diesel powered bus, car and truck NOx emissions to harmless nitrogen and water. BLUE PANTHER DEF is stable, colorless, non-flammable and non-toxic. BLUE PANTHER DEF conforms to the ISO 22241-1 specification for DEF, is API licensed and meets or exceeds all OEM specifications. API licensed Meets or exceeds all OEM specifications Conforms to ISO 22241-1 specification for DEF HANDLING Use only dedicated DEF equipment when handling/ dispensing DEF and keep dispensing equipment clean and free from dirt or other contaminants DO NOT fill DEF into diesel fuel tank DO NOT fill diesel fuel into DEF tank DO NOT add water to DEF PHYSICAL PROPERTIES Boiling Point >212 F Crystallization Point 2 F Pounds/Gallons 9.09 Specific Gravity (Water -1) 1.09 Vapor Pressure (mm of Hg) N/A Vapor Density (Air -1) 0_6 H2), >1 Water Solubility 100% Appearance Odor Colorless Clear Liquid None to Slight Ammonia Evaporation Rate <1 31

Low VOC Brake/Parts Cleaner STARFIRE TEC-A BRAKE LOW VOC is a non-chlorinated formula that quickly and effectively removes grease, brake dust, brake fluids, oils and other contaminants from brake parts, lining and pads. Do not use on electrical motors or circuits and avoid contact with rubber and plastic. ABS Disc Drum Brake cylinders Brake drums Brake linings Brake shoes Clutch discs Disc brake pads Discs Safe for use on all brake systems, including springs & wedge brakes. Fast drying Removes grease, oil, brake fluid and other contaminants from disc and drum brake components instantly Leaves no residue Cleans without disassembly Helps stop brake squeaking and can improve braking performance Non-chlorinated Low VOC formula Starting Fluid STARFIRE TEC-A-START STARTING FLUID is Professional grade engine starting fluid. It is a balanced formulation combining active, volatile solvents, upper cylinder lubricant and corrosion inhibitors, each designed to play a vital part in starting engines. Cars Trucks Buses Tractors Motorbikes and motorcycles Chain saws Boats (in-board and out board) Go-carts Stationary engines Compressors Diesel, gasoline and kerosene engines 2-cycle and 4-cycle engines Ensures fast, economical starting of all diesel and gasoline engines. Reduces starter motor and spark plug wear. Saves battery strain and engine wear during cold start. Saves time and money. Equipped with the 360 (upside - down) spray valve and extension tube for added convenience. 32

Hi-Temp Red EP2 Grease STARFIRE HI-TEMP RED EP2 GREASE is recommended for most automotive and industrial applications, including trucks, automobiles, construction equipment and heavy duty industrial service. It is commonly recommended for wheel bearing, u-joints, chassis, fifth wheel, as well as heavy duty industrial ball, roller and sleeve bearing designs. Hi-Temp Red EP2 Grease is licensed with NLGI to meet NLGI GC/LB specifications for automotive wheel bearings and chassis lubrication. High temperature capability Excellent thermal and mechanical stability Oxidation and rust resistance Excellent water resistance Good low temperature pumpability Extreme pressure additive Compatible with lithium or lithium complex greases Excellent adhesion properties, tacky consistency TYPICAL PROPERTIES NLGI Grade 2 NLGI Classification GC/LB Worked Penetration 280 Dropping Point F, Min 500 Four Ball Wear Scar Diameter, mm 0.55 Oil Separation, %, Max 5 Rust Protection Pass 1, 1, 1 Four Ball Weld Point, Kg 315 Load Wear Index 55 Water Washout @ 80 C, % <5.0 Wheel Bearing Life Test, Hrs 100+ Timken OK Load, lbs. 45 Wheel Bearing Leakage, 20 Hr, 160 C, 100 rp 7 Base Oil Viscosity @ 40 C, cst 140 Multi-Purpose EP2 Grease STARFIRE Multi-Purpose EP2 is recommended for moderate speed and temperature applications. It is suitable for bearing temperatures up to 121 C (250 F) and down to 12.2 C (10 F). STARFIRE Multi-Purpose EP2 grease provides excellent lubrication performance for automotive chassis, electric motor bearings, universal joints, fifth wheels and general purpose bearing lubrication. TYPICAL PROPERTIES NLGI Grade 2 Dropping Point F, Min. 365 Worked Penetration @ 77 F, 60 Strokes 295 Base Oil Viscosity @ 40 C, cst 140 Color Amber 29 33

3% MOLY EP2 Grease STARFIRE 3% MOLY EP2 GREASE is a high quality multipurpose grease for construction, industrial and transportation service. It has a lithium complex thickener for compatibility with a wide range of industrial greases. STARFIRE 3% MOLY EP2 GREASE offers anti-wear protection, strong extreme pressure properties, rust and oxidation inhibitors and tackifiers. It is fortified with 3% Molybdenum Disulfide for additional EP protection. It offers excellent mechanical stability, load-carrying capability and water and corrosion resistance. STARFIRE 3% MOLY EP2 GREASE is also recommended for high temperature service. STARFIRE 3% MOLY EP2 GREASE can be used in any ball or roller bearing application. It is specifically designed for use in heavy duty construction equipment where high shock loads and water washout are required. NLGI GC-LB performance guarantees excellent wheel bearing performance. Molybdenum Disulfide provides EP protection when the bulk grease has dissipated. This protection is vital for reciprocating bearings such as backhoe knuckle bushings and universal joints. FEATURES Excellent Extreme Pressure Properties High Shock Load Resistance Excellent Rust and Corrosion Protection Outstanding Oxidation Stability SPECIFICATIONS Caterpillar Multipurpose Grease with 3% Moly TYPICAL PROPERTIES NLGI Grade 2 Penetration, 60 Strokes, 25 C. DMM 280 Penetration, 1000 Strokes, 25 C. DMM 290 Penetration, 10,000 Cycles 305 Dropping Point C. (F.) 260 (500) Timken Ok Load Lbs. 60 Four Ball Wear Scar, 40 KGF, 1 Hr, 75 C., 1200 RPM. MM 0.48 Four Ball EP Weld Point, KGF 400 Four Ball Load Wear Index, KGF 54 DI Rust Protection, 48 Hr, 52 C. Pass Water Washout 1 Hr, 79 C. 3.5 Water Spray Resistance, 5 Min., 100 F. 40 PSI, % 30 High Temperature Life, 1000 RPM, 160 C., Hr. 120 Base Oil Viscosity At 40 C, CSt. 161 Color Grey 29 34

TC-W3 Premium 2-Cycle Engine Oil STARFIRE TC-W3 PREMIUM 2-CYCLE OIL is a premium, high quality motor oil formulated for use in outboard motors, motorcycles, snowmobiles, chain saws, garden equipment and other fuel lubricated or fuel injected 2-Cycle engines. It is formulated to prevent ring sticking, reduce spark plug fouling and keeps engine clean. Follow engine manufactures recommendations to determining correct oil/fuel ratio. Add oil to fuel, mix thoroughly. Multi-application usage Ideal for oil injected and fuel/oil lubricated engines Meets API TC and JASCO FB, TC-W3 specifications Licensed by National Marin Manufacturers Association (NMMA). TYPICAL PROPERTIES 30.07 6.15 Viscosity Index 159 Pour Point, F -53 Gravity, API 32.2 Specific Gravity @ 60 F (15.6 C) 0.8644 TBN, mgkoh/g 10 35