B75 Non-Metallic Design Level 2 Ball Valve Air-Powered Double-Diaphragm Pump Air Exhaust Side View Air Inlet Side View ENGINEERING, PERFORMANCE & CONSTRUCTION DATA INTAKE/DISCHARGE PIPE SIZE 3" ANSI Flange or 80mm DIN Flange CAPACITY 0 to 238 US gallons per minute (0 to 901 liters per minute) AIR VALVE No-lube, no-stall design SOLIDS-HANDLING Up to.71 in. (18mm) HEADS UP TO 100 psi or 231 ft. of water (7 bar or 70 meters) DISPLACEMENT/STROKE.9 US gallon / 3.41 liter CAUTION! Operating temperature limitations are as follows: Operating Temperatures Materials Maximum Minimum Santoprene Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion 212 F -10 F resistance. 100 C -23 C Virgin PTFE Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at 212 F -35 F elevated temperatures. 100 C -37 C Polypropylene 180 F 32 F 82 C 0 C PVDF 200 F 93 C 10 F -13 C Maximum and Minimum Temperatures are the limits for which these materials can be operated. Temperatures coupled with pressure affect the longevity of diaphragm pump components. Maximum life should not be expected at the extreme limits of the temperature ranges. CAUTION: Nonmetallic pumps and plastic components are not UV stabilized. Ultraviolet radiation can damage these parts and negatively affect material properties. Do not expose to UV light for extended periods of time. For specific applications, always consult Chemical Resistance Chart Technical Bulletin The pumps are designed to be powered only by compressed air. s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 1
Explanation of Pump Nomenclature TYPICAL CODE= B75 02. K T. B B. R R K LF Model - B75 Lube Free Design Level Wetted Components K: PVDF P: Polypropylene Valve Seats K: PVDF P: Polypropylene Non-Wetted Components T: Aluminum with Epoxy Coating Check Valves R: Santoprene T: PTFE Check Valve Type B: Ball Suction Orientation B: Bottom Diaphragms R: Santoprene T: PTFE / Santoprene Backup s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 2
Performance Curve, Model B75 Non-Metallic Design Level 2 HEAD BAR PSI 7 100 90 6 80 5 70 60 4 50 3 40 20 (34) 40 (68) 60 (102) 100 PSI(6.8 Bar) 80 PSI (5.44 Bar) 60 PSI (4.08 Bar) 80 (136) MODEL S30 Non-Metallic Performance Curve Performance based on water at ambient temperature. 100 (170) 120 (204) 140 (238) NPSHR FEET METERS 2 1 0 30 20 10 40 PSI (2.72 Bar) 20 PSI (1.36 Bar) Air Inlet Pressure 0 0 20 40 60 80 100 120 140 160 180 200 220 U.S. Gallons per minute 30 25 20 15 10 5 9.1 7.6 6 4.5 3 1.5 50 150 250 350 450 550 Liters per minute CAPACITY 650 750 850 s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 3
Dimensions: B75 Non-Metallic Dimensions in Inches Dimensional tolerance: ± 1 /8" Note: Dimensions "A" is from the vertical centerline to the end of the muffler. Dimension Standard Pump Pulse Output Kit 3M Muffler Mesh Muffler A 6 9/16" 12 9/16" 13 3/4" 12 9/16" Note: Porting Flanges are also available with PN10 80mm DIN bolting configuration. s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 4
Metric Dimensions: B75 Non-Metallic Dimensions in Millimeters Dimensional tolerance: ±3mm Note: Dimensions "A" is from the vertical centerline to the end of the muffler. Dimension Standard Pump Pulse Output Kit 3M Muffler Mesh Muffler A 167mm 202mm 349mm 225mm Note: Porting Flanges are also available with PN10 80mm DIN bolting configuration. s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 5
Dimensions: B75 Non-Metallic with Spill Prevention Dimensions in Inches Dimensional tolerance: ± 1 /8" Dimension Standard Pump Pulse Output Kit 3M Muffler Mesh Muffler A B 6 9/16" 12 11/16" 7 15/16" 14 1/16" 13 3/4" 22 9/32" 8 13/16" 14 15/16" Note: Porting Flanges are also available with PN10 40mm DIN bolting configuration. s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 6
Metric Dimensions: B75 Non-Metallic with Spill Prevention Dimensions in Millimeters Dimensional tolerance: ±3mm Dimension Standard Pump Pulse Output Kit 3M Mesh A 167mm 202mm 349mm 225mm B 322mm 357mm 579mm 380mm Note: Porting Flanges are also available with PN10 80mm DIN bolting configuration. s30nmdl2ds-rev0312 Model B75 Non-Metallic Design Level 2 Page 7
Declaration of Conformity Manufacturer: IDEX Pump Technologies (Ireland) Ltd., A Unit of IDEX Corporation, R79, Shannon, Co Clare, IRELAND. Certifies that Air-Operated Double Diaphragm Pump B and X Series, comply with the European Community Directive 2006/42/EC on Machinery, according to Annex VIII. This product has used Harmonized Standard EN 809, Pumps and Pump Units for Liquids - Common Safety Requirements, to verify conformance. Signature of authorized person Des Monaghan Printed name of authorized person October 20, 2005 Date of issue Production & Tech Manager Title Revision Level: E May 27, 2010 Date of revision