CENTRAL PROCUREMENT ORGANISATION-REFINERIES BHARAT PETROLEUM CORPORATION LTD MUMBAI REFINERY, MAHUL MUMBAI - 400074 ADDENDUM NO:2 TO THE TENDER FOR STEAM TRAP SYSTEM DYNAMIC ANALYSIS & OPTIMIZATION AT BPCL - KOCHI REFINERY, INDIA. CRFQ No. 1000196137 dated 23.10.2013 E Tender No: 12647
ADDENDUM NO:2 AGAINST TENDER FOR STEAM TRAP SYSTEM DYNAMIC ANALYSIS & OPTIMIZATION AT BPCL - KOCHI REFINERY, INDIA CRFQ No. 1000196137 dated 23.10.2013 E Tender No: 12647 The Specifications of Supplies (Section-7) of the tender is revised and the revised Specifications of supplies (Section-7) is provided along with this document. Bidders are requested to consider the same for submission of their offer. In line with above, the price schedule - both Import and Indigenous, i.e Section- 14 and Section- 15 respectively are revised accordingly. Both unpriced part of the offer and price bid shall be submitted in this revised format of price schedule only. Bidders are requested to sign and upload copy of the revised specification sheet provided along with this Addendum No:2 as token of their acceptance along with their unpriced bid. All other terms and conditions of the original tender along with Addendum No:1 remains unaltered. (For) DGM (CPO-Refineries) CPO (Refineries), Place: Mumbai Date: 18 th November 2013
BHARAT PETROLEUM CORPORATION LIMITED, CPO-REFINERIES MUMBAI REFINERY, MAHUL, MUMBAI- 400 074. CRFQ NO 1000196137 (ADDENDUM NO:2) SECTION-7 (REVISED) REVISED OF SUPPLIES
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 1 76.83.31.055.5 THRMODYNAMIC TRAP 15NB High Pressure compact module Thermodynamic Steam trap. ENDS FOR MAIN BODY Inlet=SWE ; Outlet=SWE CONNECTION TO TRAP Trap is in built with assembly LEAKAGE CLASS VI --BUBBLE TIGHT SHUT OFF BYPASS, TRAP TEST, TRAP DEPRESSURISATION PISTON VALVE IN BUILT LIMITING CONDITIONS MAXIMUM OPERATING PRESSURE : 62 bar MAX.OPERATING TEMPERATURE: 525 deg.c HYDROSTATIC TEST PRESSURE : 155 bar Trap Size: 15 NB BODY - MAIN CASTING ASTM A 217 GR WC6 BODY -DRAIN VALVES(DV1,DV2& DV3) CASTING ASTM A 217 GR WC6 BONNET CASTING ASTM A 217 GR WC6 INBUILT STRAINER SCREEN Stainless Steel- SS 316 STEM-PISTON Non rotating piston with Burnish finish (Ra 0.2) Stainless Steel - ASTM A746 - SS316 SEALING RINGS RENEWABLE & INTERCHANGEABLE Stainless steel reinforced graphite (ASBESTOS FREE) Trap Seat Maintenable and replaceable B.S. 4659 Gr BD2 Trap Disc B.S. 4659 Gr BD2 BELLEVILLE WASHER 50CRV4 HANDWHEEL Casting SG Iron - 400/15 SPIRAL WOUND GASKETS SS with exfolited Graphite Filler CERTIFICATION : IBR IIIC NOTES DRAIN VALVES ( DV1, DV2 & DV3 ) ARE IN BUILT PISTON VALVES DV 1 IS DRAIN VALVE FOR BYPASS OPERATION DV2 IS DRAIN VALVE FOR TRAP VENT OPERATION DV3 IS DRAIN VALVE FOR TRAP TESTING OPERATION (OPTIONAL) CERTIFICATION : IBR IIIC NOTES 1) MINIMUM PRESSURE FOR SATISFACTORY OPERATION IS 0.25 BAR G 2) MAXIMUM OPERATING PRESSURE 80% OF UPSTREAM PRESSURE 2 76.83.31.056.5 THRMODYNAMIC TRAP 15NB 3 76.83.31.057.5 STEAM TRAP THRMODYNAMIC 15NB High Pressure Thermodynamic Steam trap with ASTM A 217 Gr WC6 body and cover together with in-built strainer. The trap shall have replaceable seat for ease of maintenance.ibr Trap Size: 15 NB Max operating condition : 62 barg at 482 degc Body/ Cover/ Strainer screen :ASTM A 217 GR WC6 Disc/ Seat : Steel BS 4659 Gr BD2 (Chromium Steel) End Connection : SW Thermodynamic Steam Trap with Stainless Steel Body with in-built strainer screen and three port design,integral Blowdown valve allows online cleaning,ibr certified Trap Size: 15 NB Max operating condition : 55 barg at 450 degc Body,Cap, Disc : ASTMA 743 Gr-CA-40 Strainer Screen: ASTM A 240,Type 304 End Connection : SW 4 76.83.29.119.5 STEAM TRAP THRMOSTATIC 15NB Thermostatic steam Trap in ASTM A 105 forged CS body, SS internals with in-built Y type strainer with 20degC subcooling capsule screwed end connection and IBR Certified Trap Size: 15 NB Limiting Condition Max. Operating pressure: 21 bar Max. Operatin temp: 285degC Material of Construction Cover, Body : ASTM A 105 Capsule: Stainless Steel Valve Seat: ASTM A 276 Strainer Screen: ASTM A 240 Cover Gasket: Reinforced Exfoilated Graphite 1
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 5 76.83.29.003.5 STEAM TRAP THRMOSTATATIC Balanced pressure thermostatic steam trap with austenitic SS Body and internals with 22degC subcooling capsule, with NPT (F) end connection, NIBR Trap Size : 6 NB (0.25") FLOW DIRECTION : Top to bottom PMO- Max. Operating Pressure - 21kg/cm2 TMO-Max Operating Temp.- 285 degc Cold hydraulic test pressure - 42kg.cm2 Body - ASTM A276 316 ( Austenitic Stainless Steel) Cap- ASTM A276 420 (Stainless steel) Capsule- Stainless steel Spring- Stainless steel ASTM A276 302 Spacer plate ; Stainless steel- BS 1449 304S 15 Strainer screen (0.8mm perforations)- Stainless steel- ASTM A276 304 Gasket - Stainless steel ASTM A40 304 6 76.83.34.114.5 40NB Ball Float Type 7 76.83.34.115.5 STEAM TRAP BALL FL THRMODYNA 40NB Ball Float Steam Trap in CS (ASTM A 216 GR WCB) body, SS internals with steam lock release mechanism having socket weld end connection (IBR);Maximum Differential Pressure: 10 Barg along with Y type CS (ASTM A 216 GR WCB) Strainer with SS screen of 0.8mm perf. And having socket weld end connection (IBR) Size : 40 NB Note : Size of strainer same as that of steam trap Ball Float Steam Trap in CS (ASTM A 216 GR WCB) body, SS internals with steam lock release mechanism having socket weld end connection (IBR);Maximum Differential Pressure: 21 Barg along with Y type CS (ASTM A 216 GR WCB) Strainer with SS screen of 0.8mm perf. And having socket weld end connection (IBR) Size : 40 NB Note : Size of strainer same as that of steam trap 8 76.80.42.050.5 CONNECTOR PIPELINE 15NB PIPELINE CONNECTOR with IBR SIZE RANGE -15NB ENDS Inlet: SWE Outlet: SWE CONNECTION TO TRAP UNIVERSAL FLANGED BYPASS,VALVE &,UPSTREAM ISOLATION VALVE, TEST VALVE,DEPRESSURISATION VALVE,Down Stram valve IN BUILT LEAKAGE CLASS Class VI Leakage --BUBBLE TIGHT SHUT OFF LIMITING CONDITIONS MAXIMUM OPERATING PRESSURE 42 barg MAXIMUM OPERATING TEMPERATURE 425 C TEST PRESSURE WITH AIR : 84 barg MATERIAL (Pipeline connector) BODY (includes trap upstream valve) FORGED ASTM A105 BODY -Drain-valve (Bypass) CAST CAST CARBON STEEL - A216 GR WCB BONNET BOLTED ASTM A105 STEM-PISTON With burnished surface finish (Ra 0.2) ASTM A276, SS316 SEALING RINGS RENEWABLE & INTERCHANGEABLE ASBESTOS FREE -STAINLESS STEEL REINFORCED GRAPHITE HANDWHEEL CAST SG IRON 400 / 15A BELLEVILLE WASHER SPRING STEEL BONNET STUDS CARBON STEEL BONNET NUTS CARBON STEEL LANTERN BUSH ASTM A276, SS410 Universal Thermodynanmic steam trap(utd3) with IBR RATING ANSI Class 600 TESTING STANDARD SPTS-95, API 598 and ASME B16.34 SIZE RANGE Suit to pipeline connector BODY Invest Cast Stainless steel - ASTM A743- GR.CA40 Main bore cap Invest Cast Stainless steel - ASTM A743- GR.CA40 Disc Invest Cast Stainless steel - ASTM A743- GR.CA40 Strainer Cap Invest Cast Stainless steel - ASTM A743- GR.CA40 Strainer Screen Stainless steel - SS 304 Inner Gasket Stainless steel & Graphite filler Outer Gasket Stainless steel & Graphite filler CONNECTION TO CONNECTOR Universal - SWIVEL FLANGED 1) MINIMUM PRESSURE FOR SATISFACTORY OPERATION IS 0.25 BAR G 2)MAXIMUM OPERATING PRESSURE 80% OF UPSTREAM PRESSURE 3)SEAT HARDNESS = 48 to 52 HRc & DISC HARDNESS = 42 to 47 HRc 2
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 9 76.82.02.010.5 MANIFOLD COMPACT 8WAY 8 WAY CONDENSATE COLLECTION MANIFOLD WITH INBUILT GLANDLESS PISTON VALVE (IBR) TOP END & BOTTEM END CONNECTION 1.1/2" SW CL3000 TO ASME B16.11 TRACER LINE END CONNECTION 1/2" SW CL3000 TO ASME B16.11 Pipline connector INLET & OUTLET END CONNECTIONS 1/2" SW CL3000 TO ASME B16.11 CONNECTION TO TRAP UNIVERSAL FLANGED UPSTREAM ISOLATION VALVE,TRAP BYPASS/ VENT/ TEST VALVES INBUILT GLANDLESS PISTON VALVES BALANCE PRESSURE THERMOSTATIC STEAM TRAP (IBR) SIZE 1/2" END CONNECTION 1/2" UNIVERSAL FLANGED(SWIVEL TYPE) STRAINER INTEGRAL MANIFOLD MANIFOLD BODY ASTM A105N MANIFOLD INTERNALS ASTM A276 GR SS316 PIPELINE CONNECTOR BODY ASTM A105N PISTON VALVE BODY/BONNET ASTM A105N PISTON ASTM A276 GR SS316 (BURNISH FINISH-RA 0.2) OVERLAY ON STEAM TRAP CONTACT AREA SS316L STEM SS410 LANTURN BUSH ASTM A276 SS410 UPPER & LOWER RING OF VALVE(Renewable& Interchangable) ASBESTOS FREE SS REINFORCED GRAPHITE BELLEVILLE WASHER 50CRV4 FASTENERS ASTM A193 GR B7/A194 GR 2H HANDWHEEL SG IRON 400/15A SERVICE FLUID,NON-IBR STEAM CONDENSATE FROM TRACER LINES DESIGN PRESSURE(BARG) 3.4/FV DESIGN TEMPERATURE('C) 185 MAX.WORKING PRESSURE(BARG) 32 BARG MAX.WORKING TEMPERATURE('C) 300'C SAFETY FACTOR FOR TRAP 2 TIMES TRAP CAPACITY AT DESIGN CONDITION 700 KG/HR TESTING STANDARD API 598 & ASME B16.34 HYDROSTATIC TEST PRESSURE (BARG) BODY-TESTED AT 1.5 TIMES THE DESIGN PRESSURE FUNCTIONAL STEAM TEST FOR TRAP(BARG) AT MINIMUM SPECIFIED WORKING PRESSURE NDE ALL BUTT WELD JOINTS SHALL BE 100% RADIOGRAPHED LEAKAGE CLASS BUBBLE TIGHT SHUT OFF-ZERO LEAKAGE IBR certified 3
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 10 76.82.02.006.5 MANIFOLD COMPACT 4WAY 4 WAY CONDENSATE COLLECTION MANIFOLD WITH INBUILT GLANDLESS PISTON VALVE(IBR) TOP END & BOTTEM END CONNECTION 1.1/2" SW CL3000 TO ASME B16.11 TRACER LINE END CONNECTION 1/2" SW CL3000 TO ASME B16.11 Pipline connector INLET & OUTLET END CONNECTIONS 1/2" SW CL3000 TO ASME B16.11 CONNECTION TO TRAP UNIVERSAL FLANGED UPSTREAM ISOLATION VALVE,TRAP BYPASS/ VENT/ TEST VALVES INBUILT GLANDLESS PISTON VALVES BALANCE PRESSURE THERMOSTATIC STEAM TRAP (IBR) SIZE 1/2" END CONNECTION 1/2" UNIVERSAL FLANGED(SWIVEL TYPE) STRAINER INTEGRAL MANIFOLD MANIFOLD BODY ASTM A105N MANIFOLD INTERNALS ASTM A276 GR SS316 PIPELINE CONNECTOR BODY ASTM A105N PISTON VALVE BODY/BONNET ASTM A105N PISTON ASTM A276 GR SS316 (BURNISH FINISH-RA 0.2) OVERLAY ON STEAM TRAP CONTACT AREA SS316L STEM SS410 LANTURN BUSH ASTM A276 SS410 UPPER & LOWER RING OF VALVE(Renewable& Interchangable) ASBESTOS FREE SS REINFORCED GRAPHITE BELLEVILLE WASHER 50CRV4 FASTENERS ASTM A193 GR B7/A194 GR 2H HANDWHEEL SG IRON 400/15A SERVICE FLUID,NON-IBR STEAM CONDENSATE FROM TRACER LINES DESIGN PRESSURE(BARG) 3.4/FV DESIGN TEMPERATURE('C) 185 MAX.WORKING PRESSURE(BARG) 32 BARG MAX.WORKING TEMPERATURE('C) 300'C SAFETY FACTOR FOR TRAP 2 TIMES TRAP CAPACITY AT DESIGN CONDITION 700 KG/HR TESTING STANDARD API 598 & ASME B16.34 HYDROSTATIC TEST PRESSURE (BARG) BODY-TESTED AT 1.5 TIMES THE DESIGN PRESSURE FUNCTIONAL STEAM TEST FOR TRAP(BARG) AT MINIMUM SPECIFIED WORKING PRESSURE NDE ALL BUTT WELD JOINTS SHALL BE 100% RADIOGRAPHED LEAKAGE CLASS BUBBLE TIGHT SHUT OFF-ZERO LEAKAGE IBR certified 4
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 11 77.77.50.485.5 VLV PISTON SW CS IBR 15NB Piston valves RATING Class 800 STANDARD ASME B16.34 / IBR SIZE : 15 NB ENDS SW B 16.11 / Screwed Ends MATERIAL BODY - FORGED ASTM A 105 BONNET - BOLTED, ASTM A 105 SPINDLE- RISING, ASTM A 276 TP 410 PISTON - BURNISHED, ASTM A 276 TP 304 ( 18% -- 20 % Cr ) UPPER SEALING RING - -RENEWABLE ASBESTOS FREE SS REINFORCED GRAPHITE LOWER SEALING RING - - RENEWABLE ASBESTOS FREE SS REINFORCED GRAPHITE BELLEVILLE WASHER SPRING STEEL, EN - 42 HANDWHEEL CRCA CARBON STEEL ( ISD 513 ) / MALLEABLE CAST IRON ( IS 2108 ) BONNET BOLTS - ASTM A 193 B7 BONNET NUTS - ASTM A 194 2H SPACER - ASTM A 276 TP 410 SPECIAL SERVICE CONDITIONS STEAM (IBR) MAX. TEMP, 427 0 C HYDROSTATIC TEST PRESSURE BODY : 212 BAR (G) SEAT : 156 BAR (G) TEST PRSSURE WITH AIR 7 BAR (G) CERTIFICATION : IBR 12 77.77.50.520.5 VLV PISTON SW CS IBR 40NB Piston valve SW RATING Class 800 STANDARD ASME B16.34 / IBR SIZE : 15 NB ENDS SW B 16.11 / Screwed Ends MATERIAL BODY - FORGED ASTM A 105 BONNET - BOLTED, ASTM A 105 SPINDLE- RISING, ASTM A 276 TP 410 PISTON - BURNISHED, ASTM A 276 TP 304 ( 18% -- 20 % Cr ) UPPER SEALING RING - -RENEWABLE ASBESTOS FREE SS REINFORCED GRAPHITE LOWER SEALING RING - - RENEWABLE ASBESTOS FREE SS REINFORCED GRAPHITE BELLEVILLE WASHER SPRING STEEL, EN - 42 HANDWHEEL CRCA CARBON STEEL ( ISD 513 ) / MALLEABLE CAST IRON ( IS 2108 ) BONNET BOLTS - ASTM A 193 B7 BONNET NUTS - ASTM A 194 2H SPACER - ASTM A 276 TP 410 SPECIAL SERVICE CONDITIONS STEAM (IBR) MAX. TEMP, 427 0 C HYDROSTATIC TEST PRESSURE BODY : 212 BAR (G) SEAT : 156 BAR (G) TEST PRSSURE WITH AIR 7 BAR (G) CERTIFICATION : IBR 5
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 13 76.83.34.158.5 DISC CHECK VLV STD SPRING 40NB 40NB DCV Disc Check valve of the wafer pattern designed to be sandwiched between flanges. Body ASTMA351 CF8M Disc ASTMA351 CF3M Spring Retainer ASTMA240 SS316L Standard Spring IS4454:1V;GR.3 SS316 NIBR 14 76.83.29.118.5 STEAM TRAP THRMOSTATIC 15NB Steam Trap Thermostatic Universal Balanced Pressure Thermostatic Trap TESTING STANDARD SPTS-96, API 598 and ASME B16.34 SIZE RANGE 15NB, CONNECTION TO CONNECTOR SWIVEL FLANGED MAXIMUM OPERATING PRESSURE : 32 bar MAXIMUM OPERATING TEMPERATURE: 300 deg.c. BODY CF8 - ASTM A276-351 CAP CF8 - ASTM A276-351 Capsule Stainless steel Spring Stainless steel - ASTM A276-302 Screen Stainless steel - ASTM A276-304 Spiral Gasket inner Stainless steel & Graphite filler Spiral Outer inner Stainless steel & Graphite filler IBR certified 15 76.83.31.058.5 STEAM TRAP THRMODYNAMIC 15NB Universal Thermodynamic steam trap RATING ANSI Class 600 TESTING STANDARD SPTS-95, API 598 and ASME B16.34 SIZE RANGE Suit to pipeline connector BODY Invest Cast Stainless steel - ASTM A743- GR.CA40 Main bore cap Invest Cast Stainless steel - ASTM A743- GR.CA40 Disc Invest Cast Stainless steel - ASTM A743- GR.CA40 Strainer Cap Invest Cast Stainless steel - ASTM A743- GR.CA40 Strainer Screen Stainless steel - SS 304 Inner Gasket Stainless steel & Graphite filler Outer Gasket Stainless steel & Graphite filler CONNECTION TO CONNECTOR Universal - SWIVEL FLANGED 1) MINIMUM PRESSURE FOR SATISFACTORY OPERATION IS 0.25 BAR G 2)MAXIMUM OPERATING PRESSURE 80% OF UPSTREAM PRESSURE 3)SEAT HARDNESS = 48 to 52 HRc & DISC HARDNESS = 42 to 47 HRc IBR certified 16 76.83.34.006.5 KIT DISC/SCREEN STM STEAM TRAP THRMODYNAMIC 15NB Disc and screen kit for High pressure Thermodynamic steam trap. Operating Pressure =55bar. Operating Temperature=450 degree 17 76.83.34.007.5 KIT MAINVLV ASSY 40NB FLTRAP Spare kit for Thermostatic Steam Tap Spare Kit of capsule and seat assembly for balance pressure thermostatic steam trap. Operating Pressure =21bar. Operating Temperature= 285 degree C 6
Item Sl No in price schedule SECTION-7 (REVISED) REVISED OF SUPPLIES Item code Short Description Detailed specifications 18 76.83.34.008.5 KIT MAINVLV ASSY 40NB FLOAT TRAP Spare kit for 40NB Ball Float Steam Traps Main Valve Assembly spare kit with float for 40NB float trap 19 76.83.34.009.5 KIT CPSULE/SEAT ASSY ST TRAP Spare kit for Universal Balance Pressure Thermostatic Steam Trap Spare Kit of capsule and seat assembly for Universal Balance pressure thermostatic steam trap. Operating Pressure =32bar. Operating Temperature= 300 degree C 20 76.83.34.010.5 KIT DISC/SCREEN F/ST TRAP Spare kit for Universal Thermodynamic Steam Trap Disc and screen kit for Universal Thermodynamic steam trap. Operating Pressure =42bar. Operating Temperature=425 degree C 7
BHARAT PETROLEUM CORPORATION LIMITED, CPO-REFINERIES MUMBAI REFINERY, MAHUL, MUMBAI- 400 074. CRFQ NO 1000196137 (ADDENDUM NO:2) SECTION-14 (REVISED) REVISED PRICE SCHEDULE IMPORTS
CURRENCY:- Sl. No. MATERIAL CODE/ SERVICE CODE Description Unit Qty Unit Rate in figures Unit Rate in words Amount (Unit Rate * Qty) PART - I. --- SUPPLY 1 76.83.31.055.5 THRMODYNAMIC TRAP 15NB AS PER EA 5 2 76.83.31.056.5 THRMODYNAMIC TRAP 15NB AS PER EA 25 3 76.83.31.057.5 STEAM TRAP THRMODYNAMIC 15NB AS PER 4 76.83.29.119.5 STEAM TRAP THRMOSTATIC 15NB AS PER CRFQ NO. 1000196137 PRICE SCHEDULE (REVISED) FOR STEAM TRAP SYSTEM DYNAMIC ANALYSIS & OPTIMIZATION AT BPCL - KOCHI REFINERY -- FOREIGN BIDDERS EA 120 EA 200 5 76.83.29.003.5 STEAM TRAP THRMOSTATATIC EA 40 6 76.83.34.114.5 40NB Ball Float Type AS PER EA 5 7 76.83.34.115.5 STEAM TRAP BALL FL THRMODYNA 40NB AS PER EA 12 8 76.80.42.050.5 CONNECTOR PIPELINE 15NB AS PER EA 10 9 76.82.02.010.5 MANIFOLD COMPACT 8WAY AS PER EA 65 10 76.82.02.006.5 MANIFOLD COMPACT 4WAY AS PER EA 38 11 77.77.50.485.5 VLV PISTON SW CS IBR 15NB AS PER EA 150 12 77.77.50.520.5 VLV PISTON SW CS IBR 40NB AS PER EA 40 13 76.83.34.158.5 DISC CHECK VLV STD SPRING 40NB AS PER 14 76.83.29.118.5 STEAM TRAP THRMOSTATIC 15NB AS PER 15 76.83.31.058.5 STEAM TRAP THRMODYNAMIC 15NB AS PER 16 76.83.34.006.5 KIT DISC/SCREEN STM STEAM TRAP THRMODYNAMIC 15NB AS PER EA 130 EA 30 EA 10 EA 20 REVISED PRICE SCHEDULE--FOREIGN PAGE 1 of 2
CURRENCY:- Sl. No. MATERIAL CODE/ SERVICE CODE Description Unit Qty Unit Rate in figures Unit Rate in words Amount (Unit Rate * Qty) 17 76.83.34.007.5 KIT MAINVLV ASSY 40NB FLTRAP AS PER EA 50 18 76.83.34.008.5 KIT MAINVLV ASSY 40NB FLOAT TRAP AS PER EA 5 19 76.83.34.009.5 KIT CPSULE/SEAT ASSY ST TRAP AS PER EA 50 20 76.83.34.010.5 KIT DISC/SCREEN F/ST TRAP AS PER EA 10 21 Total Price for supplies (Sum of Sl. No. 1 to 20) 22 Third Party Inspection Charges as percentage of Sl.No. % 21 23 FOB Charges in percentage as percentage of Sl.No. 21 % 24 Total FOB Price for supplies 25 Ocean Freight charges Upto Mumbai Port s percentage of total FOB Price (Sl.No. 24) 26 STEAM TRAP SYSTEM DYNAMIC ANALYSIS as per detailed scope of work, inclusive of all taxes and duties excluding Service Tax. % PART - II--SITE WORKS. LS 1 NOTE: Bidders are requested to fill up the details, sign on all pages, scan and upload the priced bid in the system SIGNATURE NAME DESIGNATION REVISED PRICE SCHEDULE--FOREIGN PAGE 2 of 2
BHARAT PETROLEUM CORPORATION LIMITED, CPO-REFINERIES MUMBAI REFINERY, MAHUL, MUMBAI- 400 074. CRFQ NO 1000196137 (ADDENDUM NO:2) SECTION-15 (REVISED) REVISED PRICE SCHEDULE INDIGINEOUS
CRFQ NO. 1000196137 PRICE SCHEDULE (REVISED) FOR STEAM TRAP SYSTEM DYNAMIC ANALYSIS & OPTIMIZATION AT BPCL - KOCHI REFINERY -- INDIGINEOUS BIDDERS CURRENCY:- INDIAN RUPEES Sl. No. MATERIAL CODE/ SERVICE CODE Description Unit Qty Unit Rate in figures Unit Rate in words Amount (Unit Rate * Qty) PART - I. --- SUPPLY 1 76.83.31.055.5 THRMODYNAMIC TRAP 15NB AS PER EA 5 2 76.83.31.056.5 THRMODYNAMIC TRAP 15NB AS PER EA 25 3 76.83.31.057.5 STEAM TRAP THRMODYNAMIC 15NB AS PER EA 120 4 76.83.29.119.5 STEAM TRAP THRMOSTATIC 15NB AS PER EA 200 5 76.83.29.003.5 STEAM TRAP THRMOSTATATIC EA 40 6 76.83.34.114.5 40NB Ball Float Type AS PER EA 5 7 76.83.34.115.5 STEAM TRAP BALL FL THRMODYNA 40NB AS PER EA 12 8 76.80.42.050.5 CONNECTOR PIPELINE 15NB AS PER EA 10 9 76.82.02.010.5 MANIFOLD COMPACT 8WAY AS PER EA 65 10 76.82.02.006.5 MANIFOLD COMPACT 4WAY AS PER EA 38 11 77.77.50.485.5 VLV PISTON SW CS IBR 15NB AS PER EA 150 12 77.77.50.520.5 VLV PISTON SW CS IBR 40NB AS PER EA 40 13 76.83.34.158.5 DISC CHECK VLV STD SPRING 40NB AS PER 14 76.83.29.118.5 STEAM TRAP THRMOSTATIC 15NB AS PER 15 76.83.31.058.5 STEAM TRAP THRMODYNAMIC 15NB AS PER 16 76.83.34.006.5 KIT DISC/SCREEN STM STEAM TRAP THRMODYNAMIC 15NB AS PER 17 76.83.34.007.5 KIT MAINVLV ASSY 40NB FLTRAP AS PER 18 76.83.34.008.5 KIT MAINVLV ASSY 40NB FLOAT TRAP AS PER EA 130 EA 30 EA 10 EA 20 EA 50 EA 5 REVISED PRICE SCHEDULE--INDIGENOUS PAGE 1 of 2
CURRENCY:- INDIAN RUPEES Sl. No. MATERIAL CODE/ SERVICE CODE Description Unit Qty Unit Rate in figures Unit Rate in words Amount (Unit Rate * Qty) 19 76.83.34.009.5 KIT CPSULE/SEAT ASSY ST TRAP AS PER EA 50 20 76.83.34.010.5 KIT DISC/SCREEN F/ST TRAP AS PER EA 10 21 22 Total Price for supplies (Sum of Sl. No. 1 to 20) Excise Duty as percentage of Sl.No. 21 % 23 Sales Tax/VAT as percentage of sum of Sl. nos. 21 and 22. C Form will be issued by BPCL 24 Freight charges Upto Owner's site, all inclusive charges as percentage of Sl.No. 21. 25 Service Tax in percentage on freight (Sl no. 24)- (To be indicated seperately) 26 Any other charges (pl. specify) in percentage 27 STEAM TRAP SYSTEM DYNAMIC ANALYSIS as per detailed scope of work, inclusive of all taxes and duties excluding Service Tax. % % % % PART - II--SITE WORKS. LS 1 28 Service tax as percentage of Sl.No. 27. Vendor has to provide Service tax registration and category in which service tax is charged. NOTE: Bidders are requested to fill up the details, sign on all pages, scan and upload the priced bid in the system SIGNATURE NAME DESIGNATION REVISED PRICE SCHEDULE--INDIGENOUS PAGE 2 of 2