TECHNICAL RESPIRATORY 1
Escape/Evacuation Equipment / (PAPR) Supplied Air Respirators EVAMASQUE DIN Filtering half-mask for 15 minutes of evacuation from chemical environments. Convenient, simple and safe to use. Compact and lightweight, for easy wearing on a belt, visual comfort. Storage up to 12 years. Moulded half mask in black EPDM, elastomer harness, silicone and neoprene valves. DIN 58647-7 Full face mask with filter Art No. 17 285 70 Maintenance Kit Art No. 17 285 71 Protective case Art No. 17 799 93 Adhesive Tape - 50m/164 feet Art No. 17 288 21 EVAMASQUE with elastic headband Art No. 17 285 02 TURBOVISOR MV Complete kit Turbovisor MV 8 hours, consisting of a hood with polycarbonate screen, two visor covers, one cotton neck roll, one non-woven face seal and one motor unit. One 8-hour battery to be worn around the waist, one battery charger, one main filter TH2 + one prefilter and one flow speed test disk. Complete kit Turbovisor MV 6 hours, consisting of a hood with polycarbonate screen, two visor covers, one cotton neck roll, one non-woven face seal, one motor unit. One 6-hour battery attached to head, one battery charger, one main filter TH2 and one prefilter and one flow speed test disk. Complete kit turbovisor mv 8 hours Art No. 10 017 69 Complete kit turbovisor mv 6 hours Art No. 10 017 71 KOLIBRI Protection against impacts. Compact design, focused field of vision reduces light reflection. Washable face seal: flexible and elastic, easy replacement, ensuring increased operator comfort. Disposable visor that protects the main visor. Headband equipped with a sweat band adjustable width and height for optimal comfort. Kolibri -VL Art No. A114102 10 disposable visors Art No. A160730 10 headbands with sweat band Art No. A161472 OPENGO Compact and easy to use. Escape hood for use in high-risk chemical environments. High visibility hood with two reflective stripes, two large elastic bands, molded elastomer and large panoramic screen. Versions ABEK, ABEK1 P3 and IPR available, EN 140, EN 14387 Opengo with ABEK1 filter Art No. 17 288 01 Opengo with ABEK1 P3 filter Art No. 17 288 06 Opengo with IPR D91 filter Art No. 17 288 07 COMPACT AIR 200 A powered air supply system designed to provide respiratory protection against gases, vapour and particles depending on the type of filter element used. Lithium-ion battery for longer use. EN12941 covering respiratory protection apparatus (hoods/welding helmets), EN12942 for respiratory protection apparatuses (masks). With bayonet for hood Art No. A150401 DIN thread version for mask Art No. A150400 Belt IN PVC for decontamination Art No. A160684 Bayonet hose 970mm Art No. A161356 Lithium-ion battery Art No. CA222EU Breathing tube covers -10 pieces Art No. A161301-10 JUNIOR A For optimal protection and a wide field of view. Wide transparent visor. Full face protection and washable face seal. One clip system, ensure easy installation of disposable visors. Acetate components, optional cape. Junior A-VL Art No. A114106 100 disposable visors (JA) Art No. A160734 Five visors (JA) Art No. A160733 AIRVISOR 2 Standard airvisor 2 paint spraying kit complete with: acetate chemical resistant visor (EN166 3-F), spraygun air hose with quick release connectors, two disposable visor covers, fabric hood and neck cover, waistbelt complete (DAVW-1001), Standard airvisor 2 chemical kit complete with: acetate chemical resistant visor (EN166-3F), two disposable visor covers and neck cover, waistbelt complete (DAVW-1003), Standard airvisor 2 industrial kit complete with: polycarbonate visor (EN166 39-B), two disposable visor covers and neck cover, waistbelt complete (DAVW-1003), Airvisor 2 FV welding kit series complete with: helmet for high temperature protection, screen (90mm x 110mm), inner polycarbonate visor, fabric for face protection complete regulator with low flow alarm device and bag. Standard airvisor 2 paint spraying kit Art No. 10 139 32 Standard airvisor 2 chemical kit Art No. 10 139 34 Standard airvisor 2 industrial kit Art No. 10 139 35 Airvisor 2 FV welding kit Art No. 10 139 38 Disposable visor covers (x50) Art No. 10 017 31 Disposable visor covers (x10) Art No. 10 017 32 AIRVISOR 2 MV Airvisor 2 MV paint spraying kit complete with: acetate chemical resistant visor (EN166 3-F), spraygun air hose with quick release connectors, one fabric face seal casse te, two disposable visor covers, fabric hood and neck cover, waistbelt complete (DAVW-1001), Airvisor 2 MV chemical kit complete with: acetate chemical resistant visor (EN166 3-F) one fabric face seal cassette, two disposable visor covers, waistbelt complete (DAVW-1003), Airvisor 2 MV industrial kit complete with: polycarbonate visor (EN166 39-B). One fabric face seal cassette, two disposable visor covers and neck cover, waistbelt complete (DAVW-1003), Airvisor 2 MV Welding kit complete with: acetate chemical resistant visor (EN166 3-F), spraygun air hose with quick release connectors, one fabric face seal casse te, two disposable visor covers, fabric hood and neck cover, waistbelt complete (DAVW-1001), Airvisor 2 MV paint spraying kit Art No. 10 139 38 Airvisor 2 MV chemical kit Art No. 10 139 39 Airvisor 2 MV industrial kit Art No. 10 139 80 Airvisor 2 MV welding kit Art No. 10 139 87 Disposable visor covers (x50) Art No. 10 017 78 Disposable visor covers (x10) Art No. 10 017 79 2 3
Supplied Air Air Supply / Open-circuit Breathing Apparatus CLEARFLOW 3 Filtration units for air supply: light and easy to use. Very strong structure, high filtration capacity. Can be used by up to four people or two people when using sprayguns, new single unit design. Body in aluminum, plastic and brass regulators. High efficiency coalescing filter. Large capacity activated carbon filter. Portable or wall-mounted version available. Clearflow 3, filtration unit, three elements, wall-mounted, two CEJN connections Art No. 17 639 03 CEJN connections Art No. 17 639 04 Clearflow 3, filtration unit, three elements, wall-mounted, two RBE 06 connections Art No. 17 639 05 RBE 06 connections Art No. 17 639 06 Clearflow 3 filtration unit, three elements, wall mounted, two seamless outputs. *Supplied without quick coupler Art No. 17 639 09 connectionless outputs. *Supplied without quick coupler Art No. 17 639 10 Quick coupler connector (CEJN for Airvisor) Art No.10 017 22 Quick coupler connector (RBE 06) Art No. 17 634 20 Coalescing stage (with adapter fitting) Art No. 17 639 28 Complete activated carbon stage Art No. 17 639 16 Coalescing filter Art No. 17 639 08 Activated carbon filter Art No. 17 639 07 Clearflow 3, wall mounted, two dual action outputs Art No. 17 639 11 Clearflow 3, portable, two dual action outputs Art No. 17 639 12 DE4 Resistant four-output filtration unit for air supply devices for heavy duty use and outdoors environment. High efficiency filtration for optimum protection. Available with CEJN, RB06 or AQR06 connections. Supply pressure between 7 and 10 bars. Protection against particles equivalent effectiveness P3 odour absorption. Large capacity activated carbon filter. Honeywell DE4 (4 outputs) RBE 06 Art No. 17 635 25 Honeywell DE4 (4 outputs) AQR 06 Art No. 17 635 26 Honeywell DE 4 (4 outputs) CEJN Art No. 17 635 38 Accessories for DE4 DE4 filter set maintenance kit Art No. 17 635 04 As soon as any odour of oil is perceived in the air being breathed or when the pressure difference downstream and upstream the filters is more than one bar, it is necessary to change the set of filters on the distributor-purifier. Calculate the pressure by subtracting the pressure reading on the outlet port manometer from the pressure reading on the inlet manometer. This reading must be carried out when the devices, connected to the DE4, are discharging. In all cases it is absolutely imperative to change of filters at least once a year even when the apparatus is only operated occasionally. BLUELINE Standard air intake pipe, also available in AQR06 and RBE06 for pipes 9x16cm. For use with Airvisor 2. Blueline hose, length 3.5m or 11.5 feet with CEJN quick Art No. 10 017 26 AERIS COMFORT 2 Non-metallic back plate, ergonomic, flexible. Cushions on the straps and belts. Straps and harness made of selfextinguishing aramid material. Perfect weight distribution of the apparatus on the hips. Panoramasque full mask. Compatible with both demand positive pressure quick snap valves: - Sx-Pro activation by first breath. - Zenith automatic activation. Aeris Comfort 2 with SAD Zenith and Panoramasque full mask, five-point straps, no air cylinder Art No. 18 232 31 Aeris Comfort Type 2 with SAD Sx-Pro and Panoramasque full mask, five-point straps, no air cylinder Art No. 18 232 22 Air cylinder 6L or 1.58 US gal and 300 bars or 4,351 PSI, steel, empty* Art No. 18 225 52 Air cylinder 6.9 L or 1.82 US gal, 300 bars or 4,351 PSI, composite (20 years), empty* Art No. 18 196 61 * Can be filled on request - Other configurations available on request BIOLINE Quick and easy set up. Supply hose attached to the belt. Connects at an average pressure of 7 bar or 101 PSI. Panoramasque full mask. Zenith automatic activation positive pressure demand valve. EN 139*, EN14593-1*, EN 136 Class III Bioline on a belt with Zenith SAD, Panoramasque mask, five-point straps and CEJN connection Art No. 18 160 43 Bioline on a belt with Zenith SAD, Panoramasque mask, five-point straps and Staubli connection Art No. 18 160 69 * Other configurations available on request X-PRO Ultralight back plate. Adjustment system: - A single operation for two positions of height adjustment. - Pivot built in to adapt apparatus to all user movements. HP and MP hoses, thermo-compressed cushions, multiple anchor points for accessories and quick release buckles. X-Pro with SAD Sx-Pro and Opti-Pro full face mask, five-point straps and MP quick connection, without air tank Art No. 18 242 19 Air cylinder 6L or 1.58 US gal and 300 bar or 4,351 PSI, steel, empty* Art No. 18 225 52 Air cylinder 6.9 L or 1.82 US gal, 300 bar 4,351 PSI, Composite (20 years), empty* Art No. 18 196 61 *Can be filled upon request. Other configurations available on request. Available in ATEX version. Available in with electronic manometer. BAS Automatic switching system from the air supply network to the back-up air cylinder. High and medium (MP/HP) pressure regulator with safety valve. Integrated gauge in the cylinder valve. EN 139 & EN 402*/EN 14593-1 & EN 402* EN 136 Class III B.A.S. on a belt with Zenith SAD and Panoramasque mask with five-point straps and CEJN connection without air cylinder Art No. 18 161 32 B.A.S. on a belt with Zenith SAD and Panoramasque mask with five-point straps and Staubli connection without air cylinder Art No. 18 161 30 Blueline hose, length 7.5m or 24.6 feet with CEJN quick Art No. 10 017 27 Air cylinder 3L 200 bar/0.7 US gal 2,900 PSI (empty**), steel, with integrated pressure gauge - 15 minutes Art No. 18 225 59 Wall mounting with combination filter Portable with combined filter Blueline hose, length 10m or 32.8 feet with CEJN quick Art No. 10 047 16 *Depending on product configuration **Can be filled upon request - Other configurations available on request 4 5
Evacuation Full Face Masks BIO-S-CAPE Regulator triggered automatically upon opening of the bag. Back of the head cushion inflates automatically to keep it in place. Powerful end of supply alarm whistle. Adaptable hood. High visibility hood, resistant to moisture. Airtight, comfortable and tear-resistant neck. Breathing time is 15min. Approved temperature -30 C/ +60 C or -86 F/140 F. EN1146: 2005 SOLAS, MSC, MED and IMO Bio-S-Cape with 3L 200 bar /0.7 US gal 2,900 PSI air cylinder, steel, empty* - 15min. Art No. 18 157 32 Bio-S-Cape with 3L 200 bar /0.7 US gal 2,900 PSI air cylinder, steel, empty* - 15min. Art No. 18 157 46 AERIS MINI Light and compact. End of supply alarm whistle. Integrated gauge in the cylinder valve. Instant access to the mask. Panoramasque full mask. Positive pressure demand valve Sx-Pro. Quick release and activation. Breathing time is approximately 15min. Approved temperature -30 C/+60 C or -86 F/140 F. EN 136 Class III Aeris Mini with Sx-Pro SAD and Panoramasque full mask with five-point straps. Without air cylinder. Art No. 18 153 57 Aeris Mini with Sx-Pro SAD and Panoramasque full mask with five-point straps. With 3L 200 bar/0.7 US gal 2,900 PSI air cylinder, empty*, steel, with integrated pressure gauge - 15min. Art No. 18 153 74 OPTI-PRO Lens specially designed to facilitate downward and side vision. Impact-resistant polycarbonate lens with anti-scratch coating. Facepiece, body and high quality silicone inner half-mask. Assembly and disassembly for cleaning requires no tools. The snap on valve uses the Air-Klick system, positive pressure mask. EN136 Class III Opti-Pro five-point straps. Size M Art No. 17 150 12 PANORAMASQUE Full face mask, one size fits all. High performance EPDM (Special Polymer). Large panoramic field of view, polycarbonate lens and anti-scratch treatment (optionnal Triplex lens). The snap on valve uses the Air-Klick system. Positive pressure mask. EN136 Class III. Panoramasque mask five-point straps. Art No. 17 106 50 Wall cabinet for storing Bio-S-Cape. Art No. 18 157 44 * Can be filled on request - Other configurations available on request Air cylinder 3L 200 bar/0.7 US gal 2,900 PSI (empty*), steel, with integrated pressure gauge - 15min. Art No. 18 225 59 *Can be filled upon request. Other configurations available on request. 6 7
Block C, Tunney Ridge Business Park, Sam Green Road Elandsfontein, Germiston, South Africa T +27 11 971 8040, F +27 (0) 11 971 8065 hseorders@hsesolutions.co.za, www.hsesolutions.co.za 8