225R, 225RR - 50 RPM 225R, 225RR - 000RPM FLEX WING ROTARY CUTTER Published 07/6 PARTS MANUAL SECTION 3 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment. Important Operating and Safety Instructions are found in the Mower Safety Video that can be instantly accessed on the internet at: www.algqr.com/bve
PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. For maximum safety and to guarantee optimum product reliability, always use genuine BUSH HOG Parts. The use of inferior replacement parts may causepremature or catastrophic failure which could result in serious injury or death.direct any questions regarding parts to: BUSH HOG 250 Griffin Ave. Selma, AL 36703 www.bushhog.com Contact Us 800-30-2836 2009 Alamo Group Inc.
LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one () year for non-commercial, state and municipalities use and ninety (90) days for commercial use from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective parts. Replacement or repair parts installed in the equipment covered by this limited warranty are warranted for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equipment warranty period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an authorized Bush Hog dealer during regular working hours. Bush Hog reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Bush Hog s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale or use of the items warranted. Such incidental and consequential damages shall include but not be limited to: transportation charges other than normal freight charges; cost of installation other than cost approved by Bush Hog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts beyond the control of Bush Hog. THIS LIMITED WARRANTY SHALL NOT APPLY:. To vendor items which carry their own warranties, such as engines, tires, and tubes. 2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgement of Bush Hog such use affects its performance, stability or reliability.. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in the sole judgement of Bush Hog, affects its performance, stability or reliability. 5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, worn blades, or to normal deterioration of such things as belts and exterior finish due to use or exposure. 6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the company s sole judgement is a wear item. NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED BY BUSH HOG S SERVICE MANAGER, 250 GRIFFIN AVE., SELMA, ALABAMA 36703. Record the model number, serial number and date purchased. This information will be helpful to your dealer if parts or service are required. MODEL NUMBER SERIAL NUMBER DATE OF RETAIL SALE MAKE CERTAIN THE WARRANTY HAS BEEN FILED WITH BUSH HOG SELMA, ALABAMA
BUSH HOG/ LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 225R, 225RR - 50 RPM 225R, 225RR - 000RPM ALPHABETICAL INDEX CONTENTS PAGE Axle, Center Deck...3-6- Axles, Wing Decks...3-6-2 Axles & Related Parts, Single & Dual...3-- Arms & Related Parts, Tandem...3-6-5 Baffle Kit...3-7- Blades & Blade Holders...See Deck Assemblies Chain, Safety Tow...3-5- Chains, Discharge Safety - Single Chain...3-2-2 Chains, Discharge Safety - Double Row...3-2- Cylinders, Hydraulic...3-8-2 Decal Kits - Safety...3-- Deck Assembly, Center...3--2, 3--3 Deck Assembly, RH & LH Wing...3--, 3--5 Driveline Holder Assembly...3-5-2 Driveshaft, Wing - Comer / EG...3-- Driveshaft, Center Coupler - Comer / EG...3--2 Driveshaft, Input CV 50 RPM - Comer / EG...3--3 Driveshaft, Input CV 000 RPM -3/8 2 Spline- Comer / EG...3-- Driveshaft, Input CV 000 RPM -3/ 20 Spline- Comer / EG...3--5 Gearbox, Transfer (50 RPM Input) (Mfg. by Comer)...3-3- Gearbox, Transfer (000 RPM Input) (Mfg. by Comer)...3-3-2 Gearbox, Center and L.H. Wing 50 RPM 225...3-3- Gearbox, R.H. Wing 50 RPM - 225...3-3-6 Gearbox, Center 000 RPM - 225...3-3-5 Gearbox, L. H. Wing 000 RPM - 225...3-3-3 Gearbox, R.H. Wing 000 RPM - 225...3-3-7 Hitch Assembly, Swivel Pivot Clevis...3-5-2 Hydraulic Fittings To Tractor Remotes...3-8- Jackstand...3-5- LED Light Kit (Rear Lights Only)...3-2- Leveling Rod Assembly...3-5- Shield, Wing Driveshafts...3-2-7 Shield Assembly, Center...3-2-6 SMV Sign & Related Parts...3--6 Tire, Airplane...3-6-6 &3-6-7 Tire, Solid...3-6-6 Tongue Assembly...3-5- Turnbuckle Assembly, Axle Adjust...3-6-3
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 DECAL KIT 2! w 2) o 2! # @ r e! r u yt e ) ^ o i *( & u ^ q e r! # $ % 2@ 2@ $ % e % e % e 50035289 Tube, Manual Storage 2 5007259 Decal, Made in USA 50076960 Decal Kit 3 D6 Decal, Danger (Thrown Objects) 6 D56 Decal, Danger 5 D587 Decal, Lubricant 6 D59 Decal, Operation 7 D555 Decal, Danger 2 8 D83 Decal, Danger (Multilingual) 9 93 Decal, Important 2 0 D559 Decal, Genuine Bush Hog Parts D55 Decal, Blade Rotation CCW 2 2 D552 Decal, Blade Rotation CW 3 500609 Decal, Bush Hog Logo 2 50032 Reflector, Red 2 x 9 2 5 500322 Reflector, Amber 2 x 9 6 6 D565 Decal, Danger 2 7 D553 Decal, Warning 8 D57 Decal, Danger / Warning (50 RPM) 9 D58 Decal, Warning Over Lay (000 RPM) 20 8730 Important Decal 2 50076893 Model Decal, 225 2 5007689 Model Decal, 225 2 22 50065309 Decal, Bush Hog Logo 2 3--
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 CENTER DECK ASSEMBLY )! $ o q @ # 2! 2* 3@ 2& 3) 3! 3) 3@ 2& 2( 3! 3) i y 2# 2@ 2& 2* @ # $ u u )! ert w ert w 2) ( ^ & % ^ 2^ 2% 2$ * 3--2
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 CENTER DECK ASSEMBLY 50076826 Center Deck w/decals 50076829 Center Deck w/rings & Decals 2 50052696 Skid 2 3 622 Capscrew, 3/8 x -/ Gr. 5 8 595BH Flatwasher, 3/8 8 5 93200 Locknut, 3/8 8 6 7202 Transfer Gearbox (50 RPM) 5007272 Transfer Gearbox (000 RPM) 7 20206 Capscrew, 5/8 x 2 Gr. 5 8 202 Locknut, 5/8 Flanged 9 00790703BH Gearbox Assy, (50 RPM) 0079078BH Gearbox Assy, (000 RPM) 0 5007632 Pin, Wing Latch 2 6939 Presto Pin 9 Ga x 3 D Pltd 2 2 9BH Capscrew, / x -/ Gr. 5 2 3 5608 Locknut, / 2 9236 Hinge Rod Weldment 2 5 5007688 Weldment, Pan 6 5007663 Blade, Parallel Uplift CCW, 22.25 2 7 63607 Blade Bolt Kit 2 8 799BH Blade Bolt 2 9 20322 Lockwasher, -/8 2 20 252BH Jamb Nut, -/8 2 2 5007092 Sight Window, Gearbox 85MM 22 50BH Capscrew, 3/ x 2-/2 Gr. 8 6 23 20299 Locknut, 3/ Gr G Flng 6 2 708 Castle Nut, M36-0.0 25 0078655BH Cotter Pin, M6 x 65 26 0078557BH Spring Washer 36mm 27 50073257 Bushing 3 28 62850 Capscrew 7/8 x 5 Gr.5 2 29 20272BH Capscrew 7/8 x 5.5 Gr.5 30 582 Lockwasher, 7/8 3 3 9503 Hex Nut, 7/8 3 32 9BH Grease Fitting 3 3--3
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WING DECK ASSEMBLIES This Parts Illustration applies to RH and LH Wings. RH WING SHOWN ) u i w q @ # $ % # 3! 2( 3$ # 3@ 3# 2^2& 2% 2^2& 3$ 2^2&! @ 3# 3@ 2* 3) er ty o 2! 2) ^ ( & * & 3-- 2$ 2# 2@
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 RH & LH WING DECK ASSEMBLIES This Parts Listing applies to RH and LH Wings. 50076827 R.H. Wing Frame w/decals 50076830 R.H. Wing Frame w/rings & Decals 50076828 L.H. Wing Frame w/decals 5007683 L.H. Wing Frame w/rings & Decals 2 5007272 Skid R.H. 50072800 Skid L.H. 3 3622 Plow Bolt, 3/8 x -/ 595BH Flatwasher, 3/8 7 5 582 Lockwasher, 3/8 7 6 85200 Hex Nut, 3/8 7 7 0079079BH Gearbox Assy, R.H., (50 RPM) 0079078BH Gearbox Assy, L.H., (50 RPM) 00790753BH Gearbox Assy, R.H., (000 RPM) 00790752BH Gearbox Assy, L.H., (000 RPM) 8 20299 Locknut, 3/ Flanged 6 9 50BH Capscrew, 3/ x 2-/2 Gr. 8 6 0 5007092 Sight Window, Gearbox 93378 Cylinder Pin 2 5908BH Flatwasher, 2 3 20325 Roll Pin, / x -3/ 3 5007330 Latch 5 592 Flatwasher, 3/ 6 50076879 Pan, Blade 7 5007663 Blade, Uplift CCW R.H. Wing 2 50076632 Blade, Uplift CW L.H. Wing 2 8 63607 Blade Bolt Kit 2 9 799BH Blade Bolt 2 20 20322 Lockwasher, -/8 2 2 252BH Jamb Nut, -/8 2 22 0078655BH Cotter Pin M6 x 65 23 708 Castle Nut, M36-3.0 (Blade Pan) 2 0078657BH Spring Washer 36mm 25 50073265 Guard, Wing Discharge 26 09BH Carriage Bolt 3/8 x Gr.5 3 27 5583 Locknut 3/8 Flanged 3 28 50073257 Bushing, Axle Pivot 29 50073832 Bushing, Axle Pivot 30 62850 Capscrew 7/8 x 5 Gr.5 3 20750 Capscrew 7/8 x 6-3/ Gr.5 32 582 Lockwasher 7/8 2 33 9503 Hex Nut 7/8 2 3 9BH Grease Fitting 2 3--5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 SMV SIGN & RELATED PARTS 7 6 3 2 5 5007355 SMV Mount Angle Weldment 2 23862 SMV Spade Bracket 3 9359 SMV Sign 5093 Capscrew, /2 x -/2 Gr. 5 2 5 555 Locknut, /2 2 6 60806 Capscrew, / x 3/ Gr. 5 2 7 5608 Locknut, / Gr C 2 3--6
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL LED LIGHT KIT (REAR LIGHTS ONLY) 3 July, 206 5 8 7 9 6 2 0 LEFT SIDE 5 3 2 9 3 7 8 6 6 RIGHT SIDE 5 WIRING HARNESSES 5007720 Light Kit 50072057 Module, Enhance 2 500772 Main Harness (7 Pin, 6 Long) 3 5007722 Wishbone Harness, LH (8 Long) 5007725 Wishbone Harness, RH (8 Long) 5 5007723 Dual LED Ag Lamp, Left Side, Amber/Red 6 500772 Dual LED Ag Lamp, Right Side, Red/Amber 7 50072062 Lens, Red Replacement 2 8 50072063 Lens, Amber Replacement 2 9 5007206 Cover, Black Replacement Lens 0 ------- Slt Pn Hd Mach Screw, #0 x 2 7020600 Flatwasher, #0 3 2 520BH Locknut, #0 2 3 86BH Capscrew, / x Gr. 5 8 598BH Flatwasher, / 6 5 5608 Locknut, / Gr. C 8 6 5007735 Clamp 6 3-2-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 FRONT AND REAR SINGLE ROW HIGHWAY CHAINS u @#$% t ^&*( r @#$% i @#$% o @#$% t ^&*(!# $% ) e @# $% y @#$% w @#$% q @#$% w @#$% )!#$% e @#$% 3-2-2
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 FRONT AND REAR SINGLE ROW HIGHWAY CHAINS 50072730 Chain Assy, Center Front 5007273 Support, Front Center Chain 50072733 Rod, Chain 500726 Chain, Plated - 5 Link 2 500778 Chain Assy, Center Front Side 2 500772 Support, Front Outside Chain 500783 Rod, Chain 500726 Chain, Plated - 5 Link 2 3 500776 Chain Assy, Front Wing Chain 2 5007622 Support, Front 5006979 Rod, Chain 500726 Chain, Plated - 5 Link 56 50072727 Chain Assy, Center Rear 50072728 Support, Rear Chain 2 50072729 Rod, Chain - Rear Center Deck 500726 Chain, Plated - 5 Link 500892 Chain, Plated - Link 5 50069736 Chain Assy, Rear Axle 2 50068728 Support, Rear Chain Axle 50069722 Rod, Chain-Wing Axle 50072 Chain, Plated - 6 Link 28 6 50073038 Chain Bracket Assy, LH - Outer Wing 50073036 Bracket, Outer Chain - LH 500892 Chain, Plated - Link 8 50073323 Cable, Chain - 2.75 5005008 Sleeve, Stop 2 7 50073037 Chain Bracket Assy, RH - Outer Wing 5007303 Bracket, Outer Chain - RH 500892 Chain, Plated - Link 8 50073323 Cable, Chain - 2.75 5005008 Sleeve, Stop 2 8 50073395 Chain Bracket Assy, RH - Inner Wing 5007339 Bracket, Inner Chain - RH 500726 Chain, Plated - 5 Link 500892 Chain, Plated - Link 2 50073392 Cable, Chain - 7.25 5005008 Sleeve, Stop 2 9 50073393 Chain Bracket Assy, LH - Inner Wing 50073390 Bracket, Inner Chain - LH 500726 Chain, Plated - 5 Link 500892 Chain, Plated - Link 2 50073392 Cable, Chain - 7.25 500008 Sleeve, Stop 2 0 500726 Chain, Plated - 5 Link 8 5093 Capscrew, /2 x -/2 Gr. 5 8 2 566 Carriage Bolt, /2 x -/2 38 3 5806 Lockwaser, /2 6 596 Flatwasher, /2 6 5 85600 Hex Nut, /2 6 6 09BH Carriage Bolt, 3/8 x 6 7 582 Lockwasher, 3/8 6 8 595BH Flatwasher, 3/8 6 9 85200 Hex Nut, 3/8 6 3-2-3
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 FRONT AND REAR DOUBLE ROW HIGHWAY CHAINS u @#$% t ^&*( r @#$% i @#$% o @#$% t ^&*(!# $% ) e @# $% y @#$% w @#$% q @#$% w @#$% )!#$% e @#$% 3-2-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL FRONT AND REAR DOUBLE ROW HIGHWAY CHAINS July, 206 500735 Chain Assy, Center Front 5007273 Support, Front Center Chain 50072733 Rod, Chain 50029803 Chain, Plated - 9 Link 2 500775 Chain Assy, Center Front Side 2 500772 Support, Front Outside Chain 500783 Rod, Chain 50029803 Chain, Plated - 9 Link 2 3 500779 Chain Assy, Front Wing Chain 2 5007622 Support, Front 5006979 Rod, Chain 50029803 Chain, Plated - 9 Link 56 500736 Chain Assy, Center Rear 50072728 Support, Rear Chain 2 50072729 Rod, Chain - Rear Center Deck 50029803 Chain, Plated - 9 Link 500722 Chain, Plated - 7Link 5 5007027 Chain Assy, Rear Axle 2 50069728 Support, Rear Chain Axle 50069722 Rod, Chain-Wing Axle 500723 Chain, Plated - Link 28 6 500739 Chain Bracket Assy, LH - Outer Wing 50073036 Bracket, Outer Chain - LH 500722 Chain, Plated - 7 Link 8 50073323 Cable, Chain - 2.75 5005008 Sleeve, Stop 2 7 500738 Chain Bracket Assy, RH - Outer Wing 5007303 Bracket, Outer Chain - RH 500722 Chain, Plated - 7 Link 8 50073323 Cable, Chain - 2.75 5005008 Sleeve, Stop 2 8 5007335 Chain Bracket Assy, RH - Inner Wing 5007339 Bracket, Inner Chain - RH 50029803 Chain, Plated - 9 Link 500722 Chain, Plated - 7 Link 2 50073392 Cable, Chain - 7.25 5005008 Sleeve, Stop 2 9 500733 Chain Bracket Assy, LH - Inner Wing 50073390 Bracket, Inner Chain - LH 50029803 Chain, Plated - 9 Link 500722 Chain, Plated - 7 Link 2 50073392 Cable, Chain - 7.25 500008 Sleeve, Stop 2 0 500726 Chain, Plated - 5 Link 8 5093 Capscrew, /2 x -/2 Gr. 5 8 2 566 Carriage Bolt, /2 x -/2 38 3 5806 Lockwaser, /2 6 596 Flatwasher, /2 6 5 85600 Hex Nut, /2 6 6 09BH Carriage Bolt, 3/8 x 6 7 582 Lockwasher, 3/8 6 8 595BH Flatwasher, 3/8 6 9 85200 Hex Nut, 3/8 6 3-2-5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL CENTER SHIELD ASSEMBLY y t &* $ r July, 206 u # ( ^ e q )! 2! o 2@ 2! 2) 2%2^% ) 2# 2$ 2) u @ w i 2%2^% @ 5007302 Mount, Shield 2 50070528 Support Wldmt, Rear Shield 3 50076873 Center Shield w/decals ------- Decal, Warranty 5 93 Decal, Important 6 8730 Decal, Important 7 50076893 Decal, Model - 225 2 5007689 Decal, Model - 225 2 8 5007726 Input Shield, Top 9 500770 Center Shield Bott. w/decal 0 D56 Decal, Danger (Guard Missing) 50077 Center Shield Bott. Frt. w/decal 2 6939 Lynch Pin 2 3 50027637 U-Bolt, Foot Platform 3-2-6 50035829 Tube, Owner s Manual 5 26 Flatwasher, M8 8 6 5007259 Flag Decal 7 6006 Capscrew, 5/6 x 3/ Gr.5 3 8 96000 Locknut, 5/6 Gr C 3 9 85200 Hex Nut, 3/8 2 20 93200 Locknut, 3/8 Gr C 2 5093 Capscrew, /2 x -/2 Gr. 5 2 22 555 Locknut, /2 2 23 2003 Capscrew, 3/8 x Gr. 5 2 2 5830 Flatwasher, 3/8 SAE 2 25 35BH Capscrew, M8 x.25 x 20 Gr. 8.8 8 26 3BH Lockwasher M8 8
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WING DRIVELINE SHIELDING 2 3,, 5 8592 Input Shield 2 6855 Windows 2 3 25 Capscrew, M8 x.25 x 5 G 8.8 3BH Lockwasher, M8 5 26 Flatwasher, M8 3-2-7
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 7202 TRANSFER GEARBOX ASSEMBLY. - 50 RPM MFG. BY COMER 8 0 3 5 6 2 2 5 5 6 5 7 9 6 5, 3 7 5 3 3 3 7202 Assembly, Transfer Gearbox 70796 Bearing 6 2 7667 Casing 3 500686 Oil Seal 7088 Snap Ring 6 5 70752 Shim.3 6 6 50076037 Gear Kit ( - 2T & 2-20T Gears) 7 76673 Shaft, -3/ Z20 2 8 80538 Vent Plug 9 76675 Shaft, -3/ Z20 0 76676 Cover 89BH Capscrew M0 x.5 x 35 Gr. 8.8 6 2 708 Gas Plug, 3/8 2 3 70753 Shim. 6 7075 Shim.5 6 70755 Shim.6 6 03-3-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206. 5007272 TRANSFER GEARBOX ASSEMBLY - 000 RPM mfg. by comer 0 3 5 2 8 2 5 9 5 8 7 7 3 5 6 5, 3 3 5 3 NO. NO. DESCRIPTION QTY. 5007272 Assembly, Transfer Gearbox 70796 Bearing 6 2 7667 Casing 3 500686 Oil Seal 7088 Snap Ring 6 5 70752 Shim.3 6 6 50075082 Gear, Set (000 RPM) 7 76673 Shaft -3/ Z20 2 8 50075082 Gear, Set (000 RPM) 2 9 76675 Shaft, -3/ Z20 0 76676 Cover 89BH Capscrew M0 x.5 x 35 Gr.8.8 6 2 708 Gas Plug 3/8 2 3 70753 Shim. 6 7075 Shim.5 6 70755 Shim.6 6 80538 Vent Plug 3-3-2
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL L.H. WING GEARBOX FOR July, 206 29 30 6 5 2 7 5 9 3 8 7 0 3 0 2 25 2 20 00790752BH Gearbox Assembly 0079077BH Housing 2 0079078BH Cap, Top 3 0079079BH Shaft, Input -3/ -20spl 00790720BH Shaft, Output 5 0079072BH Gear, 22 tooth 6 0079073BH Gear, 6 tooth 7 70796 Bearing, Roller 5x85x20.75mm 2 8 5002523 Bearing, Tapered Roller 90x 50x 2.75mm 9 00777095BH Bearing, Tapered Roller 0 0075568BH Snap Ring Din 72 85x88.5x3mm 2 0079066BH Shim Kit, Input 2 2 500686 Seal, Oil 5x85x0mm 3 70725 Cap, Oil 85x0mm 00790732BH Dipstick,Oil 5 00790983BH Washer, Sealing M6 6 00790985BH Plug, Vent M6-.5 7 00790939BH Shim Kit 8 00755632BH Shim 5.3x65.3x2.5mm 9 25660 Snap Ring External 50x7x3 20 00790937BH Nut, Slotted Flanged M30-2.0 2 0079070BH Seal, Oil 70x0x2 22 5002569 Snap Ring, Internal 0mm 2 23 0079073BH Shield, Protective 2 7099 Cotter Pin M5x63 25 0079032BH Plug, Socket Hd. 26 0078657BH Wassher, Spring 36mm 27 708 Nut, Castle M36x3.0 28 0078655BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM8 6 30 00790896BH Bolt, Socket Hd. M8-.25x20 6 28 6 7 8 9 22 2 22 23 26 27 3-3-3
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL L.H. WING DECK & CENTER DECK GEARBOX FOR July, 206 29 30 6 5 2 7 5 9 3 8 7 0 3 0 2 25 2 20 0079078BH Gearbox Assembly 0079077BH Housing 2 0079078BH Cap, Top 3 0079079BH Shaft, Input -3/ -20spl 00790720BH Shaft, Output 5 007907BH Gear, 2 tooth 6 0079075BH Gear, 5 tooth 7 70796 Bearing, Roller 5x85x20.75mm 2 8 5002523 Bearing, Tapered Roller 90x 50x 2.75mm 9 00777095BH Bearing, Tapered Roller 0 0075568BH Snap Ring Din 72 85x88.5x3mm 2 0079066BH Shim Kit, Input 2 2 500686 Seal, Oil 5x85x0mm 3 70725 Cap, Oil 85x0mm 00790732BH Dipstick,Oil 5 00790983BH Washer, Sealing M6 6 00790985BH Plug, Vent M6-.5 7 00790939BH Shim Kit 8 00755632BH Shim 5.3x65.3x2.5mm 9 25660 Snap Ring External 50x7x3 20 00790937BH Nut, Slotted Flanged M30-2.0 2 0079070BH Seal, Oil 70x0x2 22 5002569 Snap Ring, Internal 0mm 2 23 0079073BH Shield, Protective 2 7099 Cotter Pin M5x63 25 0079032BH Plug, Socket Hd. 26 0078657BH Wassher, Spring 36mm 27 708 Nut, Castle M36x3.0 28 0078655BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM8 6 30 00790896BH Bolt, Socket Hd. M8-.25x20 6 28 6 7 8 9 22 2 22 23 26 27 3-3-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL CENTER DECK GEARBOX FOR July, 206 00790703BH Gearbox Assembly 0079077BH Housing 2 0079078BH Cap, Top 3 0079079BH Shaft, Input -3/ -20spl 00790720BH Shaft, Output 5 00790723BH Gear, 23 tooth 6 00790722BH Gear, 20 tooth 7 70796 Bearing, Roller 5x85x20.75mm 2 8 5002523 Bearing, Tapered Roller 90x 50x 2.75mm 9 00777095BH Bearing, Tapered Roller 0 0075568BH Snap Ring Din 72 85x88.5x3mm 2 0079066BH Shim Kit, Input 2 2 500686 Seal, Oil 5x85x0mm 3 70725 Cap, Oil 85x0mm 00790732BH Dipstick,Oil 5 00790983BH Washer, Sealing M6 6 00790985BH Plug, Vent M6-.5 7 00790939BH Shim Kit 8 00755632BH Shim 5.3x65.3x2.5mm 9 25660 Snap Ring External 50x7x3 20 00790937BH Nut, Slotted Flanged M30-2.0 2 0079070BH Seal, Oil 70x0x2 22 5002569 Snap Ring, Internal 0mm 2 23 0079073BH Shield, Protective 2 7099 Cotter Pin M5x63 25 0079032BH Plug, Socket Hd. 26 0078657BH Wassher, Spring 36mm 27 708 Nut, Castle M36x3.0 28 0078655BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM8 6 30 00790896BH Bolt, Socket Hd. M8-.25x20 6 3-3-5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL RH WING DECK GEARBOX FOR July, 206 0079079BH Gearbox Assembly 0079077BH Housing 2 0079078BH Cap, Top 3 0079079BH Shaft, Input -3/ -20spl 00790720BH Shaft, Output 5 007907BH Gear, 2 tooth 6 0079075BH Gear, 5 tooth 7 70796 Bearing, Roller 5x85x20.75mm 2 8 5002523 Bearing, Tapered Roller 90x 50x 2.75mm 9 00777095BH Bearing, Tapered Roller 0 0075568BH Snap Ring Din 72 85x88.5x3mm 2 0079066BH Shim Kit, Input 2 2 500686 Seal, Oil 5x85x0mm 3 70725 Cap, Oil 85x0mm 00790732BH Dipstick,Oil 5 00790983BH Washer, Sealing M6 6 00790985BH Plug, Vent M6-.5 7 00790939BH Shim Kit 8 00755632BH Shim 5.3x65.3x2.5mm 9 25660 Snap Ring External 50x7x3 20 00790937BH Nut, Slotted Flanged M30-2.0 2 0079070BH Seal, Oil 70x0x2 22 5002569 Snap Ring, Internal 0mm 2 23 0079073BH Shield, Protective 2 7099 Cotter Pin M5x63 25 0079032BH Plug, Socket Hd. 26 0078657BH Wassher, Spring 36mm 27 708 Nut, Castle M36x3.0 28 0078655BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM8 6 30 00790896BH Bolt, Socket Hd. M8-.25x20 6 3-3-6
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL RH WING DECK GEARBOX FOR July, 206 00790753BH Gearbox Assembly 0079077BH Housing 2 0079078BH Cap, Top 3 0079079BH Shaft, Input -3/ -20spl 00790720BH Shaft, Output 5 0079072BH Gear, 22 tooth 6 0079073BH Gear, 6 tooth 7 70796 Bearing, Roller 5x85x20.75mm 2 8 5002523 Bearing, Tapered Roller 90x 50x 2.75mm 9 00777095BH Bearing, Tapered Roller 0 0075568BH Snap Ring Din 72 85x88.5x3mm 2 0079066BH Shim Kit, Input 2 2 500686 Seal, Oil 5x85x0mm 3 70725 Cap, Oil 85x0mm 00790732BH Dipstick,Oil 5 00790983BH Washer, Sealing M6 6 00790985BH Plug, Vent M6-.5 7 00790939BH Shim Kit 8 00755632BH Shim 5.3x65.3x2.5mm 9 25660 Snap Ring External 50x7x3 20 00790937BH Nut, Slotted Flanged M30-2.0 2 0079070BH Seal, Oil 70x0x2 22 5002569 Snap Ring, Internal 0mm 2 23 0079073BH Shield, Protective 2 7099 Cotter Pin M5x63 25 0079032BH Plug, Socket Hd. 26 0078657BH Wassher, Spring 36mm 27 708 Nut, Castle M36x3.0 28 0078655BH Cotter Pin M6 x 65mm 29 3BH Washer, Helical LockM8 6 30 00790896BH Bolt, Socket Hd. M8-.25x20 6 3-3-7
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 50075799 WING DRIVESHAFT -3/ - 20 Spline Manufactured by Comer/EG ASAE SIZE 50075799 Assembly, Driveline w/clutch 7622 Complete Yoke 2 5006053 Cross Journal Set 2 3 ------ Circlip 8 76335 Grease Nipple 2 5 66865 Outer Yoke 6 66866 Roll Pin For Outer Tube 7 500688 Bushing w/grease Fitting 8 50075797 Complete Outer Tube 9 5007239 Inner Tube 0 66869 Roll Pin For Inner Tube 66870 Inner Yoke 2 76308 Complete Disc Clutch 3 500567 Guard Ret. Collar (Outer Tube) 500560 Bolt 6 3-- 5 500568 Guard Ret. Collar (Inner Tube) 7 50075798 Complete Guard w/inst. Manual 8 ------ Yoke 9 7627 Tapered Pin Set, -3/ 2 20 76080 Spring 8 2 7633 Flanged Yoke 22 76082 Bushing 23 76083 Lining Ring 2 2 76309 Clutch Support 25 76085 Inner Plate 26 76086 Pressure Plate 27 55BH Capscrew, M0 x.5 x 85 8 28 78786 Decal, Danger - Outer Tube 29 78608 Decal, Danger - Outer Guard Tube 30 5BH Locknut, M0 x.5 8
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 500738 CENTER DRIVESHAFT -3/ 20 Spline Manufactured by Comer / EG u q e w r * t * e w & i ^ o )! # @! $ % y 500738 Assembly, Driveline w/clutch 76782 Yoke w/grease Nipple 2 5006053 Cross Journal Set 2 3 76335 Grease Nipple 2 500722 Capscrew, M2 x.25 x 80 Gr. 2.9 w/locknut M2 5 500723 Retaining Washer 6 76308 Complete Disc Clutch 7 6396 Grease Nipple 8 76080 Spring 8 9 766 Flanged Yoke 0 76082 Bushing 76083 Lining Ring 2 2 7627 Tapered Pin Set -3/ 3 76309 Clutch Support 76085 Inner Plate 5 76086 Pressure Plate 6 55BH Capscrew, M0 x.5 x 85 8 7 5BH Locknut, M0 x.5 8 8 769 Flanged Yoke, Male 9 7695 Flanged Yoke, Female 3--2
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 5006976SP C.V. Driveshaft Input : -3/8 6 Spline, ASAE Size 5 Manufactured by Comer / EG 3 2 25 26 27 28 2 5 3 2 35 9 6 7 39 37 8 32 3 3 2 30 0 29 0 23 22 33 3 6 5 7 8 9 38 20 36 5006976SP Driveshaft Assembly 2 5005600 Cross Journal Set 2 3 ------ Circlip 2 76335 Grease Nipple 3 5 76357 Wide Angle Double Yoke 6 76896 Outer Yoke 7 6708 Roll Pin - Outer & Inner Tube 8 76897 Wiper 9 500722 Complete Outer Tube 0 500723 Inner Tube 67085 Roll Pin For Inner Tube 2 50072 Inner Yoke 3 500560 Cross Journal Set 76239BH Complete Yoke 5 ------ Guard Cone 6 76362 Screw Kit 6 7 5005602 Bearing Ring 8 5005603 Guard Ret. Collar - Outer Tube 9 500560 Bolt 6 20 5005605 Guard Ret. Collar - Inner Tube 22 5005606 Guard Cone Set 23 500725 Complete Guard w/inst. Manual 2 ------ Outer Circlip 25 ------ Sliding Sleeve Collar 26 ------ Spring 27 ------ Fixed Sleeve 28 ------ Ball, /2 3 29 ------ Yoke (See Item ) 30 7627 Tapered Pin Set -3/ 3 500750 Yoke Assy. -3/8-6 Spline 32 ------ Male Tube w/yoke 33 ------ Half Female Guarding w/label 3 ------ Half Male Guarding (See Item 23) 35 ------ Female Shaft (See Item ) 36 500726 Half Male Shaft w/guarding 37 78786 Decal, Danger - Outer Tube 38 78608 Decal, Danger - Outer Guard Tube 39 76899 Plastic Cap - Outer Tube 0 500727 Plastic Cap - Inner Tube 500780 Kit Collar For Yoke -3/8 3--3
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL 50069765SP C.V. Driveshaft Input : -3/8 2 Spline, ASAE Size 5 Manufactured by Comer / EG July, 206 3 2 25 26 27 28 2 5 3 2 35 9 6 7 39 37 8 32 2 7 3 30 0 29 0 23 22 33 3 6 5 7 8 9 38 20 36 50069765SP Driveshaft Assembly 2 50056 Cross Journal Set 2 3 ------ Circlip (See Item 2) 8 76335 Grease Nipple 3 5 762 Wide Angle Double Yoke 6 76893 Outer Yoke 7 66866 Roll Pin - Outer & Inner Tube 2 8 7689 Wiper 9 500728 Complete Outer Tube 0 500729 Inner Tube 5007250 Inner Yoke 2 50056 Cross Journal Set 3 ------ Circlip (See Item 2) 7622 Complete Yoke 5 ------ Guard Cone (See item 22) 6 76362 Screw Kit 6 7 500566 Bearing Ring 8 500567 Guard Ret. Collar - Outer Tube 9 500560 Bolt 6 20 500568 Guard Ret. Collar - Inner Tube 22 500569 Guard Cone Set 23 500725 Complete Guard w/inst. Manual 2 ------ Outer Circlip (See Item 3 or ) 25 ------ Sliding Sleeve Collar (See Item 3 or ) 26 ------ Spring (See Item 3 or ) 27 ------ Fixed Sleeve (See Item 3 or ) 28 ------ Ball, /2 (See Item 3 or ) 3 29 ------ Yoke (See Item ) 30 7627 Tapered Pin Set -3/ 3 500782 Yoke Assy -3/8-2 Spline 32 ------ Male Tube w/yoke (See Item 36) 33 ------ Half Female Guarding (See Item 23) 3 ------ Half Male Guarding (See Item 23) 35 ------ Female Shaft (See Item ) 36 5007252 Half Male Shaft w/guarding 37 78786 Decal, Danger - Outer Tube 38 78608 Decal, Danger - Outer Guard Tube 39 76892 Plastic Cap - Outer Tube 0 5007253 Plastic Cap - Inner Tube 500780 Kit Collar For Yoke -3/8 3--
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 5007699SP C.V. Driveshaft Input : -3/ 20 Spline, ASAE Size 5 Manufactured by Comer / EG 2 2 25 26 27 28 2 5 3 3 9 6 7 39 37 8 32 3 3 2 30 0 29 0 23 35 22 33 3 36 6 5 7 8 9 38 20 5007699SP Assembly, Driveline 50056927 Complete Yoke 2 5005600 Cross Journal Set 2 3 ------ Circlip 2 76335 Grease Nipple 3 5 76357 Wide Angle Double Yoke 6 76896 Outer Yoke 7 6708 Roll Pin - Outer & Inner Tube 8 76897 Wiper 9 5007590 Complete Outer Tube 0 500759 Inner Tube 67085 Roll Pin For Inner Tube 2 50072 Inner Yoke 3 50056 Cross Journal Set 76239BH Complete Yoke 5 ------ Guard Cone 6 76362 Screw Kit 6 7 5005602 Bearing Ring 8 5005603 Guard Ret. Collar - Outer Tube 9 500560 Bolt 6 20 5005605 Guard Ret. Collar - Inner Tube 22 5007592 Guard Cone Set 23 5007593 Complete Guard w/inst. Manual 2 ------ Outer Circlip 25 ------ Sliding Sleeve Collar 26 ------ Spring 27 ------ Fixed Sleeve 28 ------ Ball, /2 3 29 ------ Yoke 30 7627 Tapered Pin Set -3/ 3 ------ Female Tube w/yoke 32 ------ Male Tube w/yoke 33 ------ Half Female Guarding w/label 3 ------ Half Male Guarding 35 ------ Half Female Shaft w/guarding 36 ------ Half Male Shaft w/guarding 37 78786 Decal, Danger - Outer Tube 38 78608 Decal, Danger - Outer Guard Tube 39 76899 Plastic Cap - Outer Tube 0 500727 Plastic Cap - Inner Tube 5007502 Kit Collar For Yoke -3/ 3--5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 TONGUE, LEVELING ROD & RELATED PARTS 3 2 0 2 5 9 6 0 3 2 7 2 8 9 6 2 7 2 2 0 3 3 8 20 5 500705 Weldment, Tongue 2 5007280 Pivot Bushing, Tongue 2 3 906 Capscrew, x 5 Gr. 5 2 963200 Locknut, Gr. C 2 5 5007975 Levelving Rod Assy 2 6 50077 Clevis Assy, RH 7 92309 Clevis Assy, LH 8 5007976 Leveling Rod 9 562 Jam Nut 0 50073398 Pin, Swivel Link 2 20376 Flatwasher, SAE 2 20206 Cotter Pin, 3/6 x -/2 3 9BH Grease Fitting 2 2D2528 Jackstand Assy 5 D767 Decal, Warning - Jack Cap. 6 203 Rod, Hose Holder 7 200BH Capscrew, /2 x 2 Gr. 5 8 596 Flatwasher, /2 9 555 Locknut, /2 20 907 Safety Tow Chain 3-5-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 5 DRIVELINE HOLDER ASSEMBLY 3 2 6 7 7 6 500570 Mounting Bracket Weld. 2 50057 Formed Driveline Holder 3 50060002 Tie-Down Strap 20923 Capscrew, 5/8 x 6 2 5 2078 Flatwasher, 5/8 SAE 2 6 986 Lockwasher, 5/8 2 7 5563 Hex Nut, 5/8 2 SWIVEL PIVOT HITCH 9 8 5 3 9 9 0 2 9 8 3 2 6 7 6 REF. NO. PART NO. QTY. DESCRIPTION 500796 Hitch w/decals 2 500787 Shaft 3 552 Locknut, -/ Gr. C 50056888 Clevis Assembly 5 86356 Collar 6 ------ 2 Capscrew, 5/8 x -3/ Gr. 5 7 532 Capscrew, -/ x 8 Gr. 5 8 68BH 2 Capscrew, 5/8 x 3-3/ Gr. 5 9 5598BH Locknut, 5/8 0 5003587 Decal, Direction 97692 Decal, Patent 2 5005639 Decal, Direction 3 50033 Grease Fitting 5005505SP Swivel Pivot Hitch Assy 3-5-2
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 CENTER AXLE & RELATED PARTS! ^ % ) o i #$ @ e w t y y t w r & * y t! ) q o i % w e u ^ # $ @ 50077223 Axle Weldment 2 50073257 Axle Bushing 3 62850 Capscrew 7/8 x 5 Gr.5 2 20272BH Capscrew 7/8 x 5-/2 Gr.5 5 582 Lockwasher 7/8 3 6 9503 Hex Nut 7/8 3 7 20860 Capscrew x 7-/2 Gr.5 2 8 926 Cushion, Rubber 2 9 5007062 Spring 2 0 952 Cup, Spring 2 52BH Locknut, Flanged 2 2 50073267 Axle Pin 2 3 2022 Capscrew 3/8 X 2-/2 2 20363 Locknut 3/8 2 5 9087 Capscrew x Gr.5 2 6 963200 Locknut 2 7 9525 Cylinder Pin 8 20206 Cotter Pin 3/6 x -/2 2 3-6-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WING AXLES & RELATED PARTS & y w ^ e r ^ % q % $ $ t # # ) u i o! & i u @ )! o u i @ r e y L.H. WING AXLE i u R.H. WING AXLE t NOTES: 50077225 L.H. Wing Axle Weldment 2 5007722 R.H. Wing Axle Weldment 3 9087 Capscrew x Gr.5 Per Axle 963200 Lock Nut Gr.C Per Axle 5 62850 Capscrew 7/8 x 5 Gr.5 Per Axle 6 20750 Capscrew 7/8 x6-3/ Gr.5 Per Axle 7 582 Lockwasher 7/8 2 Per Axle 8 9503 Hex Nut 7/8 2 Per Axle 9 50073267 Pin, Axle Per Axle 0 2022 Capscrew 3/8 x 2-/2 Per Axle 20363 Lock Nut 3/8 Per Axle 2 20860 Capscrew x 7-/2 Gr.5 Per Axle 3 926 Cushion, Rubber Per Axle 5007062 Spring Per Axle 5 952 Cup, Spring Per Axle 6 52BH Lock Nut, Flanged Per Axle 7 5005272 Turnbuckle Assy. W/O Special Washer See Turnbuckle & Related Parts 3-6-2
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 TURNBUCKLE & RELATED PARTS y w o e r u u t i u q Order Separately (Not Part of Assembly) 5003805 Nord Washer (Special) 2 5005272 Turnbuckle Assy. 3 5005273 Body, Swivel 500527 Rod Eye, Swivel 5 5005275 Rod Eye, Threaded 6 5005276 Jamnut -/ 7 9BH Grease Fitting 3 8 586 Lock Nut 5/6 2 9 585BH Socket Hd. Capscrew 5/6 x 2 2 3-6-3
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL AXLE ARMS & RELATED PARTS SINGLE & DUAL SPINDLE July, 206 7 2 0 5 9 8 3 7 6 3 2 5 20 2,26 7 8 6 9 27 2,26 22 232 25 28 5007780 Single Spindle Axle Arm L.H. 5007779 Single Spindle Axle Arm R.H. 5007778 Dual Axle Arm 2 5005506 Pin Weldment 2 952 Cup, Spring 3 926 Cushion, Rubber 5007062 Spring, Coil 5 50070560 Spring Stop 6 20860 Capscrew, x 7-/2 Gr. 5 7 52BH Locknut, Flanged 8 2022 Capscrew, 3/8 x 2-/2 Gr. 5 9 20363 Locknut, 3/8 0 20779 Capscrew, /2 x 3-/2 Gr. 5 5806 Lockwasher, /2 2 555 Locknut, /2 3 5007777 Axle Tube Weldment w/grease Fitting (New Style) 500733 Single Spindle Axle and Hub Assy. 5 500739 Spindle (New Style) 6 5003570 Hub Assy w/cups, Lug Bolts, Nuts & Grease Fittings 7 9BH Grease Fitting 2 8 55 Lug Bolt 5 9 555BH Lug Nut 5 20 7967 Seal, Grease 2 50076BH Bearing Cone 2 22 5920 Flatwasher, 3/ SAE 23 20BH Slotted Nut, 3/ NF 2 5973 Cotter Pin 25-6-23 Hub Cap 26-6-97 Bearing Cup 2 27 50035756 Bearing Repair Kit 28 00779390 Retainer, Hub Cap 3-6-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 TANDEM AXLE ASSEMBLY (CURRENT STYLE) 6 5 2 3 8 7 9 0 33 26 25 30 2 9 3 5 67 8 27 28 3 32 30 20 23 2 22 3 32 2 29 2 3 5007658 Tandem Axle Assy. LH 50076585 Tandem Axle Assy. RH 50076572 Axle Tube Assy. 2 5007657 Spindle Frame LH 50076575 Spindle Frame RH 3 50076566 Pin Weldment 592 Flatwasher -/2 SAE 5 53065 Spirol Pin 3/8 x 2-/2 6 500735 Spindle and Hub Assy. 2 7 5003570 Hub Assembly 8 55 Lug Bolt 5 9 9BH Grease Fitting 0 555BH Lug Nut 5 50070 Spindle 2 7967 Seal, Triple Lip 3 50076BH Bearing Cone 2-6-97 Bearing Cup 2 5 5920 Flatwasher 3/ SAE 6 20BH Nut, Slotted 3/ NF 7 296 Cotter Pin /8 x -/2 8-6-23 Hub Cap 9 50035756 Bearing Repair Kit 20 00779390 Hub Cap Retainer 2 5002853 Spring Bushing 2 22 9BH Grease Fitting 2 23 926 Rubber Cushion 2 20860 Capscrew x 7-/2 Gr.5 25 52BH Locknut Flanged 26 952 Spring Cup 27 5003530 Spring 28 2022 Capscrew 3/8 x 2-/2 Gr.5 29 20363 Locknut 3/8 30 20779 Capscrew /2 x 3-/2 Gr.5 2 3 5806 Lockwasher /2 2 32 555 Locknut /2 2 33 5005506 Pin Weldment 3-6-5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL WHEEL AND TIRE ASSEMBLIES July, 206 29SP SOLID TIRE ASSEMBLY 29SP Solid Tire Assembly 500750SP SEGMENTED TIRE ASSY. 25 Diameter 500750SP Segmented Tire Assembly 5007203SP AIR FILLED AIRPLANE TIRE ASSY. 2Ply 27.75 x 8.75 -.5 5007203SP Air Filled Tire Assembly 27.75 x 8.75 -.5 3-6-6
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 WHEEL AND TIRE ASSEMBLIES 50050727SP AIRPLANE TIRE ASSEMBLY 5005233BH Tire 29 x 9.0-5/6 Ply 2 500523 Tube 9 x 5 3 50073233 Wheel Flange Set 2005 Capscrew, /2 x Gr. 5 0 5 580 Lockwasher, /2 0 6 5508 Hex Nut, /2 0 7 50050727SP Tire Assembly 3 7 5 3 6 2 50076225SP FOAM FILLED AIRPLANE TIRE ASSY. 25 x 7-8 50076225SP Foam Filled Tire Assembly 25 x 7-8 3-6-7
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 BAFFLE KIT (OPTIONAL) t e q o )! y u i r w 5007029 Baffle, RH Wing 2 50070222 Baffle, RH Center 3 50070223 Baffle, LH Wing 5007022 Baffle, LH Center 5 50070228 Baffle, LH Wing Extension 6 50070232 Baffle, RH Wing Extension 7 50077266 Baffle, LH Center Extension 8 50077268 Baffle, RH Center Extension 9 566 Carriage Bolt /2 x -/2 Gr.5 9 0 5806 Lockwasher /2 9 85600 Hex Nut /2 9 3-7-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 HYDRAULICS WHEN PLUMBING TO TRACTOR REMOTES 9956 Wing Lift Cylinder 2 2 99565 Axle Control Cylinder 3 6277 Hydraulic Hose Assy. 228" 2 5005063 Hydraulic Hose Assy. 96" 5-0-98 Elbow 90 degree 3 6 86500 Breather Plug 3 7 5006858 Restrictor,.078 Orifice 2 8 635 Stop Kit 9 203 Rod,Hose Holder 0 5330BH Adaptor 9/6 JIC to 3/ SAE 3 2-6-3 Adaptor 9/6 JIC to /2 NPT 3 200BH Capscrew, /2 x 2 Gr. 5 2 596 Flatwasher, /2 3 555 Locknut, /2 9525 Pin, Dia 5 20206 Cotter Pin, 3/6 x -/2 2 3-8-
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL July, 206 8 7 2 Cylinder Assembly Part Number Stamped Here. 3 3 5 6 5 2 2 0 6 8 9 7 99565 AXLE HYDRAULIC CYLINDER 3.5 Bore X 8 Stroke.25 Rod Diameter 3/ 6 ORB Ports Manufactured by Monarch 9956 WING HYDRAULIC CYLINDER 3 Bore x 2 Stroke.25 Rod Diameter 3/ 6 ORB Ports Manufactured by Monarch 99565 Hydraulic Cylinder Assembly 9529 Clevis Cap 2 9530 Rod Cap 3 5007628 Piston 953 Rod.25 Dia. 5 9526 Cylinder Tube 6 9527 Tie Rod 7 9525 Pin, Dia. 2 8 20206 Cotter Pin, 3/6 x -/2 9 9533 Thread Lock 0 9528 Rod Clevis,.25 x 9522 Set Screw, 3/8 x /2 Knurled 2 9520 Hex Nut, 5/8 UNF 8 3 ------- Hex Nut, - 9535 Plug, 3/ 5 5002072 Decal, Caution 6 5007623 Seal Kit 9956 Hydraulic Cylinder Assembly 950 Clevis Cap 2 9539 Rod Cap 3 5007627 Piston 9536 Rod.25 Dia. 5 9537 Cylinder Tube 6 9538 Tie Rod 7 9525 Pin, Dia. 2 8 20206 Cotter Pin, 3/6 x -/2 9 9533 Thread Lock 0 9528 Rod Clevis,.25 x 9522 Set Screw, 3/8 x /2 Knurled 2 85600 Hex Nut, /2 - UNC 8 3 ------- Hex Nut, - 9535 Plug, 3/ 5 5002072 Decal, Caution 6 5007622 Seal Kit 3-8-2
250 GRIFFIN AVE. SELMA, AL 36703 (33) 872-626 (33) 87-2700 PARTS ORDERING -800-30-2836 FAX -800-572-78 WWW.BUSHHOG.COM