Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED light for machine, enclosure, or other industrial lighting applications. 0% brighter and 0% more efficient than previous model Low-profile, space-saving design Rugged, water-resistant IP69K option Available in 8 lengths from 5 to 0 mm Lensed models or choice of clear or diffuse window Daisy chain power to multiple lights NOTE: When cascading lights, a model with an ON/OFF switch can be used to control the lights cascaded off the switched model. New Features Enhanced light quality: brighter, closer spaced LEDs Optional snap clips for easy installation and repositioning Capability to dim lights using the wiring pinout (Hi/Lo/Off) Optional switch is now Hi/Lo/Off Automatic temperature protection built into the unit. Above 50 C, the light dims to manage heat and protect product lifetime Stand-Alone Light cable Stand-Alone Light or End Light in a Cascade QD First Light in a Cascade cable First or Middle of a Cascade QD WLS8- Work Light Strips are available as either stand-alone models, or as cascade models that can be "daisy-chained" together for a continuous length of lighting, with a minimum of wiring. Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-ended accessory cordset must be used between each pair of lights in a cascade. Family Cascadable LED Color Lighted Length (mm) Window Construction Connector WLS8- C W 5 D X Q C = Cascadable X = Non-cascadable W = Cool white WW = Warm white R = Red G = Green B = Blue Y = Yellow 5 85 0 570 70 850 990 0 X = Not sealed S = Sealed Blank = Clear plastic D = Diffused plastic L5 = 5 deg lensed window Blank = None PB = High/Lo/Off Switch PWM = Pulse Width Modulation Dimming * Models require a mating cordset Sealed models not available with On/Off Switch Blank = m integral cable Q = Integral -pin Euro-style QD (mating cordset required*) Original Document 75008 Rev. B September 0 75008
Table : IP50 Models Non-Switch Models HIGH/OFF/LOW Switch Models Stand-Alone Cascade Stand-Alone Cascade Lighted Length Power Connector WLS8-XW5X WLS8-CW5X WLS8-XW5XPB WLS8-CW5XPB 5 mm WLS8-XW85X WLS8-CW85X WLS8-XW85XPB WLS8-CW85XPB 85 mm WLS8-XW0X WLS8-CW0X WLS8-XW0XPB WLS8-CW0XPB 0 mm WLS8-XW570X WLS8-CW570X WLS8-XW570XPB WLS8-CW570XPB 570 mm WLS8-XW70X WLS8-CW70X WLS8-XW70XPB WLS8-CW70XPB 70 mm m cable WLS8-XW850X WLS8-CW850X WLS8-XW850XPB WLS8-CW850XPB 850 mm WLS8-XW990X WLS8-CW990X WLS8-XW990XPB WLS8-CW990XPB 990 mm WLS8-XW0X WLS8-CW0X WLS8-XW0XPB WLS8-CW0XPB 0 mm Only cabled power connector models are listed. To order the -pin M/Euro-style integral power connector model, add suffix Q to the model number (for example, WLS8-XW85XQ). Table : IP67/IP69K Models Stand-Alone Models Cascade Lighted Length Power Connector WLS8-XW5S WLS8-CW5S 5 mm WLS8-XW85S WLS8-CW85S 85 mm WLS8-XW0S WLS8-CW0S 0 mm WLS8-XW570S WLS8-CW570S 570 mm WLS8-XW70S WLS8-CW70S 70 mm m cable WLS8-XW850S WLS8-CW850S 850 mm WLS8-XW990S WLS8-CW990S 990 mm WLS8-XW0S WLS8-CW0S 0 mm Only cabled power connector models are listed. To order the -pin M/Euro-style integral power connector model, add suffix Q to the model number (for example, WLS8-XW85SQ). Wiring Diagram Pin Wire Color Connection brown to 0 V dc blue dc common black Connect to to 0 V dc for 50% max. intensity white Not used For maximum intensity, leave the black wire floating or connected to common. www.bannerengineering.com - Tel: +-76-5-6 P/N 75008 Rev. B
Specifications Operating Voltage to 0 V dc Must be used with a Class power supply Table : Typical Current Light Length Typical Current Max. Current Lumens (Typical @5 C) V dc V dc 0 V dc A Cool White 5 mm 0. A 0.5 A 0. A 0. 5 85 mm 0.66 A 0.0 A 0. A 0.8 650 0 mm.0 A 0.6 A 0.6 A. 975 570 mm.6 A 0.6 A 0.8 A.6 00 70 mm.75 A 0.77 A 0.60 A.0 65 850 mm. A 0.9 A 0.7 A. 950 990 mm.59 A.08 A 0.85 A.8 75 0 mm.0 A. A 0.97 A. 600 Light Characteristics Color: Cool White Color Temperature (CCT): 6000 700K Lumen output: 650 (± 5%) per foot, typical at 5 C (77 F) Luminous efficacy: 90 lumens/watt typical at V dc at at 5 C (77 F) CRI: 85, typical Push Button II = 00% light intensity I = 50% light intensity 0 = Off Construction Clear anodized aluminum housing; painted zinc end caps; acrylic window; zinc plated steel brackets Mounting () swivel brackets SMBWLS8RA included and () screws Connections Integral -pin Euro-style QD (-pin connecting cordset required for QD models); or m (6.5 ft) integral cable NOTE: Do not spray cable with highpressure sprayer, or cable damage will result. Environmental Rating IEC IP50 (non-sealed models) or IEC IP67/IP69K per DIN 0050 (sealed models) Vibration and Mechanical Shock Vibration 0-55 Hz.0 mm p-p amplitude per IEC 60068--6 Shock 5G ms duration, half sine wave per IEC 60068--7 Operating Temperature 5 C to 70 C ( F to 58 F) Light output begins to decrease above 50 C ( F) and will be approximately 65% of max intensity at 60 C (0 F) and 0% of max intensity at 70 C (58 F) Storage Temperature 0 C to 70 C ( 0 F to 58 F) Certifications Application Note When connecting cascadable lights in series it is important not to exceed maximum current limitations: Maximum length of light at V dc:. m (.6 ft) Maximum length of light at V dc:.0 m (9.8 ft) Maximum length of light at 0 V dc:. m (0. ft) Lumen values lowered by 5% on diffused window models. P/N 75008 Rev. B www.bannerengineering.com - Tel: +-76-5-6
Dimensions.0 mm [0.55 ] 8 mm [.0 ] 8 mm [0. ]. mm [.7 ] mm [0.8 ].5 mm [0.5 ] 8 mm [.0 ] 9.5 mm [0.7 ] 9 mm 0 mm [0.75 ] [.8 ] L5 Models.7 mm dia [0.58 ] M x 0.50 ISO (x) 7.5 mm [0.0 ] 0.8 mm [0.8 ] 5 mm dia [0.0 ] 0.5 mm [0. ].5 mm [. ] Dimensions are shown with the included SMBWLS8RA bracket. Non-Switch Models IP50 Models IP67/IP69K Models L L L L WLS8-..5X WLS8-..5S mm (8.7 in) 05 mm (8. in) 5 mm (5.7 in) 75 mm (6.9 in) WLS8-..85X WLS8-..85S 6 mm (. in) 6 mm (.6 in) 86 mm (.6 in) 6 mm (. in) WLS8-..0X WLS8-..0S 50 mm (9.8 in) 87 mm (9. in) 7 mm (6.8 in) 57 mm (8.0 in) WLS8-..570X WLS8-..570S 6 mm (5. in) 68 mm (.7 in) 568 mm (.6 in) 598 mm (.5 in) WLS8-..70X WLS8-..70S 785 mm (0.9 in) 769 mm (0. in) 709 mm (7.9 in) 79 mm (9. in) WLS8-..850X WLS8-..850S 96 mm (6.5 in) 90 mm (5.8 in) 850 mm (.6 in) 880 mm (.6 in) WLS8-..990X WLS8-..990S 067 mm ( in) 05 mm (. in) WLS8-..0X WLS8-..0S 08 mm (7.6 in) 9 mm (6.9 in) 99 mm (9.0 in) 0 mm (0. in) mm (.57 in) 6 mm (5.7 in) ON/OFF Switch Models Model L L L L WLS8-..5XPB 5 mm (9.9 in) 5 mm (9. in) 5 mm (5.7 in) 05 mm (8. in) WLS8-..85XPB 9 mm (5. in) 76 mm (.8 in) 86 mm (.6 in) 6 mm (.6 in) WLS8-..0XPB 5 mm (.0 in) 57 mm (0. in) 7 mm (6.8 in) 87 mm (9. in) WLS8-..570XPB 67 mm (6.5 in) 658 mm (5.9 in) 568 mm (.6 in) 68 mm (.7 in) WLS8-..70XPB 85 mm (. in) 799 mm (.5 in) 709 mm (7.9 in) 769 mm (0. in) WLS8-..850XPB 956 mm (7.6 in) 90 mm (7 in) 850 mm (.6 in) 90 mm (5.8 in) WLS8-..990XPB 097 mm (. in) 08 mm (.6 in) 99 mm (9.0 in) 05 mm (. in) WLS8-..0XPB 8 mm (8.7 in) mm (8. in) mm (.57 in) 9 mm (6.9 in) Accessories Cordsets Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the first light in a cascade. Use double-ended cordsets between lights in a cascade. www.bannerengineering.com - Tel: +-76-5-6 P/N 75008 Rev. B
-Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout MQDC-06 MQDC-5 MQDC-0 MQDC-50.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Typ. M x ø.5 MQDC-06RA MQDC-5RA MQDC-0RA MQDC-50RA.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Right-Angle Typ. [.6"] 0 Typ. [.8"] = Brown = White = Blue = Black M x ø.5 [0.57"] -Pin Threaded M/Euro-Style Cordsets Double Ended Model Length Style Dimensions Pinout MQDEC-0SS MQDEC-0SS MQDEC-06SS MQDEC-SS MQDEC-0SS MQDEC-0SS MQDEC-50SS 0. m ( ft) 0.9 m ( ft).8 m (6 ft).66 m ( ft) 6.0 m (0 ft) 9. m (0 ft) 5. m (50 ft) Male Straight/ Female Straight 0 Typ. [.58"] M x ø.5 [0.57"] Typ. [.7"] M x ø.5 [0.57"] = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) Dimensions Pinout CSB-M0M0 No branch No trunk CSB-M0M CSB-MM CSB-M8M CSB-M5M CSB-M5M CSB-UNT5M x 0.0 m ( ft) No trunk 0.0 m ( ft).50 m (8 ft).57 m (5 ft) 7.60 m (5 ft) 7.60 m (5 ft) Unterminated Ø.5 [0.57"] M x 0 Typ. [.58"] 5 [.8"] Ø.5 [0.8"].0 [.69"] 8.0 [0.7"] Typ. [.7"] Ø.5 [0.57"] M x = Brown = White = Blue = Black P/N 75008 Rev. B www.bannerengineering.com - Tel: +-76-5-6 5
Brackets SMBWLS8RA The bracket kit is available as a replacement for the one that comes with the Work Light Strip. The kit contains two end brackets and four screws. SMBWLS8SM This kit allows the light to be mounted at a right angle to the mounting surface. The kit contains two end brackets and four screws. SMBWLS8SP Stainless steel snap bracket kit Includes two brackets SMH6 This kit allows the light to be mounted to a /6-inch Unistrut channel. The kit includes: #0- spring nuts (qty ) #0- socket head cap screws (qty ) #0 lock washers (qty ) SMBWLSMAG Magnetic mounting bracket for easy attachment to steel surfaces SMBWLSMAGR Protective cover also available to prevent scratches to painted surfaces 6 www.bannerengineering.com - Tel: +-76-5-6 P/N 75008 Rev. B
Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - Tel: +-76-5-6