Drilling & Piling Attachments of Sweden General Catalogue 2012
Made in Sweden
Blast Hole Drilling MD33 MD45 DM60 Foundation Drilling SPD AB It s with pride and joy I present our company SPD AB. DM85 DM-X DT85 DT145 We are a company specialized in manufacturing drilling and foundation equipment. Almost 20 years of experience and the fact that we only use high quality components from world leading manufacturers has resulted in a range of robust and reliable products. Magnus Andersson CEO We make money the old-fashioned way. We earn it! -Merril Lynch Piling PM85 PM-X PT145 Accessories Drifters Rotary Heads Hydraulic Breakers Piling Hammers
Some of the benefits with an SPD drilling mast is Quality Reliability Flexibility Service Remote control as standard since 2003 Also possible to remote control the carrier Use the excavator for digging, drilling, piling etc Change between mast and other tools in a couple of minutes
Blast Hole Drilling Mast Attachments Mast attachments for excavators For blast hole drilling Recommended Excavator 4-10 ton M D33 Hole Range* 30-41 mm Mast Length Stroke, travel length rod Feeding* Weight* Remote control Lateral tilt (Option tilt STD drifter Option drifter*** Recommended hydraulic flow** Recommended hydraulic pressure** 3600 mm 3100 mm 10 kn 750 kg yes standard 25 degrees 360 degrees) DF500X 10 kw DF430, HB4, HB5 >125 liter/min 200 bar Recommended engine power** >30 kw Shank adaptor 7/8 Hex 108 x 22 Dust Collector 1 Hex 108 x 25 yes Recommended Excavator 8-16 ton M D45 Hole Range* 35-89 mm
Mast Length Stroke, travel length rod Feeding* Weight* Remote control Lateral tilt STD drifter 4800 mm 4200 mm 25 kn 850 kg yes standard 360 degrees slew drive DF550S 17 kw Option drifter*** COP1 132, HB5, HB1 5 Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor Dust Collector >215 liter/min >250 bar >60 kw R32, R38, T38, T45 yes >More than <Less than *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice -Not applicable
Blast Hole Drilling Mast Attachments Andersson & Rask company from Hofors, is drilling blast holes with DM60. The mast is fully equipped with GPS and display with X, Y and Z on the remote control, even the carrier Volvo EC21 0 is remote controlled.
Mast attachments for excavators For blast hole drilling Recommended Excavator 18-25 ton DM60 Hole Range* 35-89 mm Mast Length Stroke, travel length rod Feeding* Weight* Remote control Lateral tilt STD drifter Option drifter*** Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor Dust Collector 6500 mm 5800 mm 25 kn 1500 kg yes standard 360 degrees slew drive DF550S 17 kw COP1240, HB5, HB15 >215 liter/min >250 bar >60 kw R32, R38, T38, T45 yes
Foundation Drilling Mast Attachments *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without furthe r notice
Skanska Grundläggning is drilling piles for wind mills in Gothenburg coastline, with DM85 drilling mast
Foundation Drilling Mast Attachments Mast attachments for excavators For foundation drilling, combined with blast hole drilling Recommended Excavator 18-36 ton DM85 Hole Range* <323 mm Mast Length Stroke, travel length Feeding* Weight* Remote control Lateral tilt STD drifter STD rotary drive Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor 9000 mm 7000 mm 80 kn 4500 kg yes standard 90 degrees Krupp HB45 Krupp HR40 260 liter/min >250 bar >89 kw R55 Left/Right C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option DM-X Modular System Hole Range* <323 mm Recommended Excavator 18-36 ton
Mast Length Modular system, 5500 mm + 3000 mm + 2000 mm Stroke, travel length 3500 mm/6500 mm/8500 mm Feeding* 80 kn Weight* 3500 kg - 4500 kg Remote control yes standard Lateral tilt 90 degrees STD drifter Krupp HB45 STD rotary drive Krupp HR40 Recommended hydraulic flow** 260 liter/min Recommended hydraulic pressure** Recommended engine power** Shank adaptor >250 bar >89 kw R55 Left/Right *Nominal value (depending on different tools and equipment) >More than <Less than C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice
Foundation Drilling Mast Attachments BESAB is drilling anchors in the docks in Landskrona with DT1 45 on Volvo EC290 carrier
Mast attachments for excavators For foundation drilling DT85 Telescopic System Hole Range* <323 mm Recommended Excavator 21-36 ton Mast Length Telescopic System 5500 mm - 9000 mm Stroke, travel length Feeding* Weight* Remote control Lateral tilt STD drifter STD rotary drive Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor 7000 mm 100 kn 5500 kg yes standard 90 degrees Krupp HB45 Krupp HR40 260 liter/min >250 bar >89 kw R55 Left/Right C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option DT1 45 Telescopic System Hole Range* <403 mm Recommended Excavator 30-36 ton Mast Length Telescopic System 9000 mm - 15 500 mm Stroke, travel length 13000 mm Feeding* Weight* Remote control Lateral tilt Slewing mast left to right STD drifter STD rotary drive Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor 140 kn 6500 kg yes standard 90 degrees 180 degrees Krupp HB45 Krupp HR40 260 liter/min >250 bar >89 kw R55 Left/Right C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders mus t be guaranteed by customer All measures and values are approximate and can be changed without further notice
Piling Mast Attachments Kankareen Paalutus OY is piling steel piles for the foundation of the new SPD factory 2010 in Sala Sweden They are using PT1 45 which is the largest and latest of their seven machines from SPD.
Mast attachments for excavators For Micro Piling Recommended Excavator 18-36 ton PM85 Pile Range* 76 mm - 170 mm Mast Length Stroke, travel length Feeding* Weight* 9000 mm 7000 mm 80 kn 4500 kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** 120 liter/min >250 bar >89 kw PM-X Modular System Pile Range* 76 mm - 140 mm Recommended Excavator 18-36 ton Mast Length Modular system, 5500 mm + 3000 mm + 2000 mm Stroke, travel length 3500 mm/6500 mm/8500 mm Feeding* Weight* Remote control Lateral tilt 80 kn 3500 kg - 4500 kg yes standard 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** 260 liter/min >250 bar >89 kw >More than <Less than *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice
Piling Mast Attachments Engströms piling rig PT1 45 on the trailer, on the way to the jobsite
Piling Mast Attachments attachments for excavators For Micro Piling Mast PT85 Telescopic System Pile Range* 76 mm - 140 mm Recommended Excavator 21-36 ton Mast Length Telescopic System 5500 mm - 9000 mm Stroke, travel length 7000 mm Feeding* 100 kn Weight* 4500 kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** 120 liter/min >250 bar >89 kw PT1 45 Telescopic System Pile Range* 76 mm - 170 mm Recommended Excavator 30-36 ton
Piling Mast Attachments Mast Length Telescopic System 9000 mm - 15 500 mm Stroke, travel length 13000 mm Feeding* 140 kn Weight* 5000 kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** 120 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice Thyssen Krupp rotary head with integrated flushing head
Accessories Krupp HR40 Rotary Head
Drifters & Rotary Heads Thyssen Krupp HB5
Drifters & Rotary Heads Krupp HB45 Drifter Drilling and foundation are a demanding industry, that s why we use drifters or rotary heads from Thyssen Krupp and Doofor mainly.
Drifters & Rotary Heads
Accessories
Drifters & Rotary Heads Doofor Rock drill name DF430X DF500X DF510X DF550S DF600S Percussion power class 5kW 10kW 10kW 17kW 20kW Shank/Striker or chuck type Hex 108 mm * 22 mm Hex 159*25mm Male R32 Male T45 Hex 108 mm * 25 mm Male R38 Male T51 Male T38 Male T45 Recommended maximum 36 mm 45 mm 45 mm 70 mm 89 mm Hole diameter Percussion oil pressure 110 bar 130 bar 130 bar 160 bar 140 bar Max. rotation speed with recommended motor 300 RPM 300 RPM 300 RPM 200 RPM 180 RPM Max. rotation torque intermitent 100 Nm 110 Nm 110 Nm 1300 Nm 1645 Nm Weight 41 Kg 55 Kg 59 Kg 152 Kg 230 Kg Length without shank adapter 460 mm 532 mm 584 mm 998 mm 1002 mm Width 232 mm 245 mm 245 mm 292 mm 363 mm Height 165 mm 172 mm 172 mm 292 mm 289 mm
Accessories
Accessories SPD Hydraulic Rock Breakers SPECIFICATIONS: T-series DESCRIPTION H90 H100 H180T H300T H380T H580T H900T H1000 H1200T H1500T H1700T Weight (kg) 135 145 180 312 380 570 890 960 1 180 1 470 1 680 Oilflow (l/min) 15-30 20-35 24-50 34-60 40-80 45-85 85-110 90-115 100-120 120-150 120-150 Pressure (bar) 75-95 80-100 90-120 95-130 100-140 130-150 150-170 150-170 150-170 160-180 160-180 Blows (B/min) 800-1 400 650-1 200 550-1 100 450-1 000 475-950 480-850 450-780 420-730 420-700 350-680 320-660 Tool (mm) 40 45 60 70 75 90 100 115 125 135 140 Excavator (t) 0.5-2.5 0.8-3.0 1.5-4.0 2.5-7.5 5.0-9 6.0-11 9.0-17 13-18 13-22 18-28 20-30 Energy (J) 180 225 325 600 700 1 275 2 000 2200 2 950 4 500 5 000 85dB (A) radius (m) 7 7 8 10 11 12 13 13 14 15 16 Heigth with tool (mm) 973 1 046 1 180 1 362 1 441 1 760 1,985 2070 2 224 2 301 2 366 Hose Diameter (inch) 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 1 1" 1" 1" Piston weight (Kg) 3.86 5.1 7.5 14.6 14.9 29 43 48 68 90 97 S P E CI FI CA TI O NS: F- and E-series DESCRIPTION H1600F H1700F H2400F H2800F H1100E H1500E H2100E H2800E H3000E H5000E Weight (kg) 1 800 1 930 2 680 3150 1 120 1 700 2200 3200 3 324 4856 Oilflow (l/min) 120-150 120-150 160-230 190-250 90-120 125-150 150-190 180-250 190-310 250-340 Pressure (bar) 160-180 160-180 160-180 160-185 150-170 160-180 160-180 165-185 180-210 170-190 Blows (B/min) 300-600 280-550 280-550 280-400 400-750 350-700 300-650 260-450 120-340 100-250 Tool (mm) 137 140 155 160 120 135 150 160 165 175 Excavator (t) 18-28 20-30 28-40 32-45 13-20 18-25 27-40 32-45 35-50 50-65 Energy (J) 4 600 5 100 6 100 8 900 2 800 4 800 6 000 9 000 10 500 12 500 85dB (A) radius (m) 15 16 17 18 14 15 16 17 19 20 Heigth with tool (mm) 2 350 2 366 2 728 2 820 2 035 2 305 2 620 2 765 3 000 3280 Hose Diameter (inch) 1" 1" 1 1/4" 1 1/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/4 ston weight (kg) 97 115 135 171 69. Valve Extended piston stroke - Smoother operation - Minimal repercussion on carrier [ T-SERIES ] [ F-SERIES ] [ E-SERIES ] Accumulator Valve Accumulator Valve housing Valve Improved properties (Piston) - Improved emergency running properties - Manufactured with high-quality nickel and vanadium alloy steel SPD tool - Exceptional performance and reliability - Manufactured with high-quality alloy steel Back Head - Start-up safety - Power accumulator Tie rod - Dynamic screw design prevents damage Accumulator - Reduces irregular pulse pressure on hydraulic circuit - Improved striking power with supply of accumulated gas pressure Lubrication adequate for entire shift - Reduced wear and tear - Consistent availability due to extended maintenance intervals Cylinder & Valve - Prevents scoring with precision finishing treatment
SPD Piling Hammers SPECIFICATIONS: SPD Piling Hammers DESCRIPTION SPD150 SPD200 SPD300 SPD350 SPD400 SPD1000 SPD1500 SPD2000 SPD3600 SPD4000 SPD5000 Weight (kg) 130 260 370 410 580 940 1370 1790 2240 2860 4000 Oilflow (l/min) 20-30 20-50 30-50 40-80 45-90 80-100 90-120 130-150 190-250 190-250 250-310 Pressure (bar) 80-110 90-120 90-130 100-130 130-150 150-170 150-180 160-180 160-180 160-180 160-180 Blows (B/min) 600-1200 550-1200 450-900 450-900 450-800 450-800 400-900 400-800 350-700 300-600 250-450 Tool (mm) 45 53 68 75 85 100 120 135 150 160 175 Excavator (t) 0,8-3,0 1,0-3,5 2,0-7,0 3,5-9,0 6,0-11,0 9,0-12,0 13,0-18,0 18,0-26,0 28,0-35,0 33,0-50,0 45,0-55,0 Energy (J) 400 480 849 1210 1764 2443 4234 5290 7200 9970 13125 85dB (A) radius (m) 7 7 8 10 11 12 13 13 14 15 16 Heigth with tool (mm) 1110 1220 1386 1479 1726 2053 2090 2320 2574 2859 3291 Hose Diameter (inch) 1/2" 1/2" 1/2" 1/2" 3/4«3/4" 1«1" 1" 1 1/4 1 1/4 Piston weight (Kg) 5,4 7,8 14,8 19 29,5 42,2 69 101 136 173 181 FUNCTIONS SPD Piling Hammers is enviromental friendly hammer series, which offer low noise level, high impact power, and is the ideal piling tool The energy of piston stroke is accumulated due to charged nitrogen gas in the backhead. The hammers have high piston weight because it s needed when piling Accumulator as high pressure surge dampener, it s for protecting pump output of base machine. All our hammers always include: 2 pcs std tools, 2 pcs std hoses, 1 top bracket, 1 set of Nitrogen filling set, 1 pcs of tool box, 1 pcs manual, 1 pcs spare parts list SPD uses the highest quality materials which are machined by our experienced technicians utilizing state-of-the-art manufacturing technology and production machinery. SPD s stringent quality control procedures ensure superior quality hydraulic hammers. - Precision machining - Strict monitoring of temperatures and time intervals for multi-phase heat treatment processes - Precision welding of hammer holders, hammer brackets and adapters - Stringent, continuous quality control checks and comprehensive final testing of all SPD hydraulic hammers prior to delivery
Accessories Remote Controls Remote Controls are standard on all our rigs. Developed together with our customers during a long time Various range of types depending of use and attachment model The most advanced with display for drilling data, X, Y and Z and GPS
Factory, Headquarter and Export After Market Service Rental Machines and Equipment Drilling & Foundation Equipment Sales
Accessories Made in Sweden www.spd.se Machine Sales +46 (0)224 138 10
Accessories www.spd.se