WALLPLUGS & FRAME ANCHORS Wallplugs Plastic CODE COLOUR DRILL SIZE BOX per/1000 GNF01 Yellow 5.00 100 9.12 GNF02 Red 5.50 100 10.15 GNF03 Brown 7.00 100 12.20 GNF0 Blue 10.00 100 33.10 Wallplugs Nylon General purpose standard grade wallplugs for use with screw fixings. Frame Fixings Countersunk Head Powerful expansion through fixings for fastening of frames, doors, timber section and battens etc. to concrete and all masonry. Manufactured from high grade self extinguishing nylon polyamide with a zinc plated countersunk screw in either pozi drive or torx head, also available in hex head. Anti rotation wings and knock in protection to prevent premature expansion. Install through the framework into a clean drill hole by light hammer tapping, once positioned, tighten screw to secure frame. Removable by unscrewing. High quality wallplugs for use with all screw fixings, coach screws and metric bolting in all masonry. High impact load values and distortion resistance. Winged to prevent rotation in the drill hole. GNF05 M 20.00 100 3.92 GNF06 M5 25.00 100 3.92 GNF07 M6 30.00 100 3.92 GNF08 M7 35.00 100 5.60 GNF09 M8 0.00 100 6.56 GNF10 M10 50.00 50 12.0 GNF11 M12 60.00 25 15.2 GNF12 M1 70.00 15 26.58 GNF13 M16 80.00 10 66.5 GNF1 M20 90.00 5 112.56 Multiplugs Nylon Manufactured from high grade polyamide these premium high load plugs are suitable for use in all masonry, hollow and sheet materials e.g plasterboard, plywood & MDF. GNF15 M6 35.00 100 5.6 GNF16 M6 5.00 100 6.72 GNF17 M8 50.00 50 7.56 GNF18 M10 60.00 25 13.38 GNF19 M12 70.00 15 30.2 GNF20 M1 75.00 10 6.62 Frame Anchor Nylon High grade nylon sleeve with GRP expansion wedge and zinc plated screw for installation of timber, Upvc and metal frames, White cover caps included. GNF21 M8 100.00 100 22.50 GNF22 M8 120.00 100 31.28 GNF23 M8 10.00 100 29.25 GNF2 M10 100.00 100 29.25 GNF25 M10 120.00 100 33.75 GNF26 M10 10.00 100 38.25 GNF27 M10 165.00 100 0.50 Pozidrive Head GNF28 M6 55.00 100 15.80 GNF29 M8 60.00 100 23.32 GNF30 M8 80.00 100 26.62 GNF31 M8 100.00 100 28.70 GNF32 M8 120.00 100 29.85 GNF33 M8 10.00 100 36.70 GNF3 M10 60.00 100 31.20 GNF35 M10 80.00 100 33.8 GNF36 M10 100.00 50 37.96 GNF37 M10 120.00 50 2.92 GNF38 M10 10.00 50 8.12 GNF39 M10 160.00 50 59.2 GNF0 M10 200.00 50 26.28 Torx Head GNF1 M10 60.00 100 39.00 GNF2 M10 80.00 100 2.30 GNF3 M10 100.00 50 7.5 GNF M10 120.00 50 53.65 GNF5 M10 10.00 50 60.15 GNF6 M10 160.00 50 7.05 GNF7 M10 200.00 50 330.35 Contact sales for bulk enquiries. Also available in stainless steel. Frame Anchor Metal Suitable for fixing of all construction framework and timber and metal section into concrete and general masonry. Dual wedge encapsulated expansion anchor preventing frame distortion on tightening. Zinc coated for maximum corrosion protection. Pozi drive countersunk screw, winged anti rotation head to lock into fixture. GNF8 M8 70.00 100 3.29 GNF9 M8 90.00 100 9.1 GNF50 M8 110.00 100 53.73 GNF51 M8 130.00 100 59.99 GNF52 M10 70.00 100 8.29 GNF53 M10 90.00 100 5.36 GNF5 M10 110.00 100 60.98 GNF55 M10 130.00 100 67.95 GNF56 M10 150.00 100 7.75 GNF57 M10 180.00 50 88.52 GNF58 M10 200.00 50 112.6 32
Hammer Fixings Countersunk Head GNF6 M5 25.00 100 8.00 GNF65 M5 30.00 100 8.00 GNF66 M5 0.00 100 9.15 GNF67 M5 50.00 100 9.20 GNF68 M6 35.00 100 9.00 GNF69 M6 50.00 100 12.70 GNF70 M6 60.00 100 1.56 GNF71 M6 70.00 100 15.80 GNF72 M8 50.00 100 20.12 GNF73 M8 60.00 100 15.26 GNF7 M8 80.00 100 16.16 GNF75 M8 100.00 100 19.35 GNF76 M8 120.00 100 26.51 GNF77 M8 10.00 100 31.23 GNF78 M10 80.00 50 1.0 GNF79 M10 100.00 50 5.72 GNF80 M10 120.00 50 51.26 GNF81 M10 10.00 50 56.39 GNF82 M10 160.00 50 68.22 Stainless Steel GNF83 M5 30.00 100 25.70 GNF8 M5 50.00 100 31.15 GNF85 M6 35.00 100 32.80 GNF86 M6 50.00 100 35.0 GNF87 M6 60.00 100 3.95 GNF88 M6 70.00 100 50.90 GNF89 M8 60.00 100 6.60 GNF90 M8 80.00 100 80.55 GNF91 M8 100.00 100 103.0 GNF92 M8 120.00 100 139.35 GNF93 M8 10.00 100 15.30 Nylon Disc Washer A hammer set range of through fixings for use many construction applications e.g. frame fixing, batten fixing, fastening of sheet materials and cladding, metal partitions, signage etc. Deforming crumple zone for fast adjustment on uneven surfaces, reinforced screw head for shock protection allowing high knock-in loads. Available in a choice of countersunk or collared head and zinc plated steel or stainless steel. Nylon disc washer for use in panel or board fixing. GNF9 M8.5 x 5 100 39.2 Hammer Fixings Collared Head Collared head suitable for steel track and profiled sheet installations etc. Also available in stainless steel. GNF95 M6 35.00 100 15.80 GNF96 M6 50.00 100 17.72 GNF97 M8 50.00 100 26.82 GNF98 M8 80.00 100 21.5 Contact sales for other available sizes Hammer Screw Metric Thread M6 and M8 metric connecting thread suitable for general applications e.g service installations. GNF99 M6 35.00 100 28.38 GNF100 M8 60.00 100 37.8 HAMMER-IN FIXINGS Express Nails Through fixed steel expansion nail rapidly set by driving into a clean drill hole. Suitable for general construction anchoring of timber and steel into masonry e.g. battens for fireline and plasterboard on concrete soffits. GNF101 M6 30.00 100 19.08 GNF102 M6 60.00 100 2.12 GNF103 M6 80.00 100 29.6 GNF10 M8 70.00 100 33.05 GNF105 M8 90.00 100 36.05 GNF106 M8 110.00 100 5.05 GNF107 M8 130.00 100 86.30 GNF108 M8 150.00 100 122.9 GNF109 M8 180.00 100 16.03 Concrete Nails An effective fixing solution for fastening timber and metal sections and components to concrete. Comprises a deforming nail which locks into the drill hole on striking. Hot dipped galvanised and fire resistant. GNF110 5mm 5.00 100 21.05 GNF111 5mm 55.00 100 27.10 GNF112 5mm 65.00 100 28.85 GNF113 5mm 75.00 100 31.80 GNF11 5mm 85.00 100 3.15 GNF115 5mm 100.00 100 3.08 GNF116 5mm 135.00 100 9.20 Helical Batten Nails Helical formed nails offer extreme strength due to the twisting action locking the nail in the substrate providing a solid fixture. A timber to timber fixing suitable for cross battening and insulation installations in walls and roofs. Support tool recommended for longer lengths. Full technical details and loading data on request. GNF117 M6 75.00 100 52.50 GNF118 M6 85.00 100 59.50 GNF119 M6 90.00 100 63.00 GNF120 M6 100.00 100 70.00 GNF121 M6 110.00 100 77.00 GNF122 M6 115.00 100 80.50 GNF123 M6 125.00 100 87.50 GNF12 M6 130.00 100 91.00 GNF125 M6 10.00 100 98.00 GNF126 M6 150.00 100 105.00 GNF127 M6 160.00 100 112.00 GNF128 M6 180.00 100 126.00 GNF129 M6 200.00 100 10.00 GNF130 M6 220.00 100 15.00 GNF131 Hand support tool 1 63.00ea GNF132 Power support tool 1 332.50ea 33
PLASTERBOARD & CAVITY FIXINGS Jet Plug Cavity Anchor Brad point sheet material self drilling fixing with deep cutting thread in alloy hot dipped galvanised metal or nylon. Hollow Wall Anchor Cavity anchor suitable for hollow or sheet materials. Setting tool for fast assembly. M to M6: panhead screw. M8: Hex head screw. CODE DESCRIPTION LENGTH BOX per/100 GNF133 Plug c/w screw 25.00 100 19.88 GNF13 Plug c/w screw 39.00 100 19.88 GNF135 Nylon plug 29.00 100 17.6 Jet Plug Threaded Stud Cavity Anchor Stud fixing for fastening of threaded components or general fittings. GNF17 M 21.00 100 20.20 GNF18 M 32.00 100 20.20 GNF19 M 6.00 100 26.00 GNF150 M5 37.00 100 27.00 GNF151 M5 52.00 100 29.90 GNF152 M5 65.00 100 33.15 GNF153 M6 37.00 100 32.25 GNF15 M6 52.00 100 35.50 GNF155 M6 65.00 100 1.00 GNF156 M6 80.00 100 7.60 GNF157 M8 1.00 100 6.95 GNF158 M8 55.00 100 51.05 GNF159 M8 68.00 100 56.00 GNF160 M8 83.00 100 60.5 GNF161 Anchor Setting Tool 1 30.70ea CODE STUD SIZE LENGTH BOX per/100 GNF136 M6 39.00 100 29.72 GNF137 M8 39.00 100 30.2 Driva Toggle Anchor Heavy duty general fixing to board materials e.g. services, sanitaryware, radiators. Metal Cavity Frame Anchor Provides a solid anchor in hollow materials and cavities for framework and various fixtures due to expansion cone umbrella. CODE SCREW SIZE LENGTH BOX per/100 GNF138 M 53.00 100 82.0 Spring Toggle Anchor Cavity toggle anchor for general purpose fixing to board materials. Minimum required cavity of 35mm. Available in hook format. GNF139 M5 50.00 50 56.0 GNF10 M5 75.00 50 6.20 GNF11 M6 50.00 50 76.80 GNF12 M6 75.00 50 8.20 Heavy Duty Cavity Toggle Anchor Heavy duty cavity toggle for heavy suspended loads. Minimum required cavity of 70mm. Available in hook format. GNF13 M5 100.00 50 105.16 GNF1 M6 100.00 50 127.92 GNF15 M8 100.00 50 32.0 GNF16 M10 170.00 10 1088.52 GNF162 M10 110.00 100 91.5 GNF163 M10 130.00 100 96.85 GNF16 M10 150.00 100 113.55 GNF165 M10 180.00 50 13.0 GNF166 M10 200.00 50 160.75 HST Hi-Load Cavity Fixings For fixing of heavy loads to gypsum fibre board, plasterboard and timber sheet. Installed without the need for special tools, the nylon body forms a knot in the cavity allowing clamping of the fixture, leaving an attractive finish without damage to the wall. Recommended by leading plasterboard manufacturers. 10mm drill hole. CODE TYPE SUIT BOARD BOX per/box GNF167 Countersunk 3-18mm 25 16.2 GNF168 Panhead 3-18mm 25 16.2 GNF169 Hook 3-18mm 25 19.62 GNF170 Eye 3-18mm 25 19.62 GNF171 Countersunk 18-30mm 25 17.91 GNF172 Panhead 18-30mm 25 17.91 GNF173 Hook 18-30mm 25 22.7 GNF17 Eye 18-30mm 25 22.7 3
Hook Bolts Finish: BZP/Yellow passivated. Larger sizes POA, specials bent to order. SHEETING FASTENERS Drive Screws GNF175 M6 60.00 100 38.56 GNF176 M6 70.00 100 39.20 GNF177 M6 80.00 100 1.0 GNF178 M6 100.00 100 3.78 GNF179 M6 120.00 100 9.01 GNF180 M6 10.00 100 53.31 GNF181 M6 160.00 100 60.76 GNF182 M6 180.00 100 75. GNF183 M6 200.00 100 81.35 GNF18 M8 60.00 100 53.89 GNF185 M8 70.00 100 50.18 GNF186 M8 80.00 100 51.75 GNF187 M8 90.00 100 53.70 GNF188 M8 100.00 50 55.5 GNF189 M8 110.00 100 57.2 GNF190 M8 120.00 100 59.33 GNF191 M8 130.00 100 6.81 GNF192 M8 10.00 50 67.3 GNF193 M8 150.00 50 70. GNF19 M8 160.00 50 73.05 GNF195 M8 180.00 50 81.2 GNF196 M8 200.00 50 83.38 GNF197 M8 220.00 50 88.7 GNF198 M8 20.00 50 97.23 GNF199 M8 260.00 50 107.55 GNF200 M8 300.00 50 129.6 Crook Bolts Finish: Yellow passivated. CODE DIAMETER LENGTH per/100 GNF213 1G 10.00 3.03 GNF21 1G 160.00 2.60 GNF215 18G 100.00 39.75 GNF216 18G 125.00 9.01 GNF217 18G 10.00 52.00 GNF218 18G 150.00 56.9 GNF219 18G 160.00 59.76 GNF220 18G 180.00 6.23 Washer Diamond Curved CODE DIAMETER BOX per/100 GNF221 M6 100 8.22 GNF222 M8 100 8.22 GNF223 M10 100 8.22 Spat Sealing Washers & Covers GNF201 M8 115.00 50 85.1 GNF202 M8 135.00 50 91.58 GNF203 M8 155.00 50 102.68 Gutter Bolts & Nuts GNF20 M6 20.00 200 21.38 GNF205 M6 25.00 200 22.3 GNF206 M6 30.00 200 23.7 GNF207 M6 35.00 100 25.02 GNF208 M6 0.00 100 26.21 GNF209 M6 50.00 100 29.07 GNF210 M6 60.00 100 3.96 GNF211 M6 80.00 100 8. GNF212 M6 100.00 100 63.38 CODE DIAMETER DESCRIPTION BOX per/100 GNF22 M6 washer 100 19.88 GNF225 M8 washer 100 19.88 GNF226 M6 cover 100 26.0 GNF227 M8 cover 100 26.0 Sela Washers & Caps CODE DIAMETER DESCRIPTION BOX per/100 GNF228 M6 x 20mm washer/clear 100 27.28 GNF229 M8 x 20mm washer/clear 100 52.88 GNF230 M6 x 20mm washer/grey 100 52.88 GNF231 M8 x 20mm washer/grey 100 52.88 GNF232 M6 x 20mm washer/black 100 27.28 GNF233 M8 x 20mm washer/black 100 38.80 GNF23 20mm cover cap/clear 100 2.72 GNF235 20mm cover cap/grey 100 26.90 GNF236 20mm cover cap/black 100 22.12 GNF237 Hinged washer & cap. 100 19.58 35
MISCELLANEOUS Dowel Screw Finish: Bright zinc plate, available in stainless steel to order. Pronged Tee Nuts Metric GNF238 M 20.00 100 20.52 GNF239 M 25.00 100 20.61 GNF20 M 30.00 100 20.79 GNF21 M 35.00 100 21.51 GNF22 M 0.00 100 21.78 GNF23 M6 0.00 100 23.0 GNF2 M6 50.00 100 31.1 GNF25 M6 60.00 100 28.26 GNF26 M6 70.00 100 37.35 GNF27 M6 80.00 100 39.15 GNF28 M6 90.00 100 3.38 GNF29 M6 120.00 100 51.12 GNF250 M8 50.00 100 6.35 GNF251 M8 60.00 100 2.30 GNF252 M8 70.00 100 5.5 GNF253 M10 60.00 100 73.53 GNF25 M10 70.00 100 8.33 GNF255 M12 100.00 100 165.8 GNF256 M12 120.00 100 183. GNF257 M12 15.00 100 221.92 GNF258 M12 165.00 100 250.72 Screw Inserts Hex Socket CODE SIZE BOX per/100 GNF272 M x 6 200 26.0 GNF273 M5 x 8 200 28.5 GNF27 M6 x 9 200 29.36 GNF275 M8 x 11 200 1.32 GNF276 M10 x 13 200 62.96 Star Dowel Alloy Finish: Self colour. CODE LENGTH BOX per/100 GNF277 19.00 100 15.37 GNF278 25.00 100 16.27 GNF279 28.00 100 17.08 GNF280 33.00 100 19.35 GNF281 38.00 100 22.6 GNF282.00 100 25.98 GNF283 50.00 100 27.75 GNF28 60.00 100 3.39 GNF285 70.00 100.0 GNF286 76.00 100 8.78 Corrugated Saw Edge Fasteners GNF259 M 10.00 100 51.52 GNF260 M5 12.00 100 65.76 GNF261 M6 12.00 100 75.12 GNF262 M6 15.00 100 86.32 GNF263 M6 20.00 100 111.52 GNF26 M8 15.00 100 122.72 GNF265 M8 23.00 100 223.52 GNF266 M10 25.00 100 301.76 Screw Inserts Knock In CODE DIAMETER BOX per/100 GNF267 M 100 52.88 GNF268 M5 100 70.00 GNF269 M6 100 96.8 GNF270 M8 100 128.72 GNF271 M10 100 176.96 Finish: Self colour. CODE CORRUGATIONS LENGTH BOX per/1000 GNF287 3 1/2 1000 29.83 GNF288 1/ 1000 31.05 GNF289 3/8 1000 32.58 GNF290 1/2 1000 33.63 GNF291 5/8 1000 0.5 GNF292 3/ 1000 6.98 GNF293 1 1000 60.80 GNF29 5 1/ 1000 37.39 GNF295 5 3/8 1000.50 GNF296 5 1/2 1000 7.73 GNF297 5 5/8 1000 52.2 GNF298 5 3/ 1000 58.72 GNF299 5 1 1000 75.55 GNF300 6 3/8 1000 1.5 GNF301 6 1/2 1000 50.53 GNF302 6 5/8 1000 60.22 GNF303 6 3/ 1000 71.30 GNF305 6 1 500 90.88 36