Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables are used. The insert arrangements as well as the electrical characteristics are detailed in the IPT IPT-SE Catalogue. Backshells suitable for EMI shield terminations and heat shrink boots are also available. The receptacle is also available with PCB contacts. IP67 protection is standard, IP68 upon request. IPT-MB ow To Order Sample Part Number IPT 06 A 18-11 P X c MB Series IPT = MI-C-26482 Ser. I, bayonet-lock with polychloroprene insert Plug rounding Fingers = rounding fingers; omit for none (Plug Only) Style See shell style table Environmental Class See environmental class table / Arrangement See insert arrangement table Contact ender P = Pin S = Socket Alternate Rotation See alterernate positions table Contact Type C = Crimp; omit for solder cup Material/Finish MB = Marine Bronze Styles Code Receptacle escriptions Code Plug escriptions 00 Front panel mount square flange receptacle with accessory threads 06 Straight cylindrical plug connector with accessory threads 01 In-line cylindrical receptacle with accessory threads 08 Cylindrical plug connector with 90 backshell 02 Front panel mount square flange receptacle no accessory threads 07 Rear panel mount jam nut receptacle no accessory threads Environmental Class A Connector/backshell assembly does not include a wire sealing grommet E,, M Connector/backshell assembly includes a wire sealing grommet W, J Connector backshell assembly includes an overall cable sealing gland STyle and environmental class matrix Environmental Classes Style A E M W J 00 01 02 Not Applicable 07 Not Applicable 06 08 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 31
Insert arrangements and alternate insert positions / Arrangement Cl. Isol. Rating Insert Arrangement Table Contact 20S 20 16S 16 12S 12 8-2 I 2 8-3 I 3 8-3A I 3 8-4 I 4 8-33 I 3 10-2 II 2 10-6 I 6 10-7 I 7 10-8 I 8 10-98 I 6 12-3 II 3 12-4 I 4 12-8 I 8 12-10 I 10 12-14 I 14 12-A6 I 6 14-4 I 4 14-5 II 5 14-12 I 8 4 14-12/3 II 12 14-14* I 14 14-15 I 14 1 14-18 I 18 14-19 I 19 16-2** I 2 x 16-2.5 16-8 II 8 16-23 I 22 1 16-26 I 26 16-99 I 21 2 18-11 II 11 18-32 I 32 20-16 II 16 20-39* I 37 2 20-41 I 41 22-21* II 21 22-36 I 36 22-41 I 27 14 22-55 I 55 22-95 I 26 6 24-61 I 61 * Consult Factory ** Supplied only for classes without grommet / Arrangement Alternate Positions egrees W X Y Z 8-2 58 122 8-3 60 210 8-3A 60 8-4 45 8-33 90 10-2 10-6 90 10-7 90 10-8 10-98 90 180 240 270 12-3 180 12-4 38 12-8 90 112 203 292 12-10 60 155 270 295 12-14 60 155 270 295 12-A6 14-4 45 14-5 40 92 184 273 14-12 43 90 14-12/3 14-14 17 110 155 234 14-15 17 110 155 234 14-18 15 90 180 270 14-19 30 165 315 16-2** 16-8 54 152 180 331 16-23 158 270 16-26 60 275 338 16-99 66 156 223 340 18-11 62 119 241 340 18-32 85 138 222 265 20-16 238 318 333 347 20-39 63 144 252 333 20-41 45 126 225 22-21 16 135 175 349 22-36 72 144 216 288 22-41 39 135 264 22-55 30 142 226 314 22-95 26 180 266 24-61 90 180 270 324 α α α α α α The 3 mating pins are 120 spaced. All pictures show a receptacle connector. The key orientation on plug connectors is clockwise. IAW BS9522 F0017. Normal Alternate Insert Position Alternate Insert Position Normal Normal position Normal position Position position Alternate Alternate position Alternate with position with Pin position Contacts pin with contacts pin with contacts pin contacts Alternate Alternate with position Alternate Socket position with position Contacts socket with socket with contact 32 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice.
IPT Series Alternate Keyway Positions size N Polarization α β χ δ ψ 8 105 35 75 50 60 10 105 35 75 50 60 12 105 35 75 50 60 14 105 35 75 50 60 16 105 35 75 50 60 18 105 35 75 50 60 20 105 35 75 50 60 22 105 35 75 50 60 24 105 35 75 50 60 size B Polarization α β χ δ ψ 8 - - - - - 10 85 35 75 50 40 12 89 35 75 50 44 14 91 35 75 50 46 16 93 35 75 50 48 18 95 35 75 50 50 20 95 35 75 50 50 22 97 35 75 50 52 24 97 35 75 50 52 size E Polarization α β χ δ ψ 8 118 30 100 30 73 10 115 30 100 30 70 12 115 30 100 30 70 14 75 30 100 30 30 16 75 30 100 30 30 18 75 30 100 30 30 20 75 30 100 30 30 22 75 30 75 30 30 24 75 30 100 30 30 size C Polarization α β χ δ ψ 8 - - - - - 10 125 35 75 50 80 12 121 35 75 50 76 14 119 35 75 50 74 16 117 35 75 50 72 18 115 35 75 50 70 20 115 35 75 50 70 22 113 35 100 50 68 24 113 35 75 50 68 F Polarization size α β χ δ ψ 8 82 50 75 45 47 10 85 50 75 45 50 12 85 50 75 45 50 14 120 50 75 35 75 16 120 50 75 35 75 18 120 50 75 35 75 20 120 50 75 35 75 22 120 50 75 35 75 24 120 50 75 35 75 Mating Pins are spaced 120. Picture Shows a receptacle connector. Key orientation on plug connectors is clockwise. IAW BS9522 F0017 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 33
IPT 00 wall mount receptacle - IPT 00 with Class A backshell 9.5 (.37) E F. E Min. F Thread ±0.4[.02] ±0.1[0.00] Ø M 0[0.00] 8 15.00 [0.59] 7.55 [0.30].5000-28 UNEF 20.6 [0.81] 15.10 [0.59] [0.12] 45.9 [1.81] 10 18.20 [0.72] 10.70 [0.42].6250-24 UNEF 23.8 [0.94] 18.25 [0.72] [0.12] 45.9 [1.81] 12 21.20 [0.83] 13.85 [0.55].7500-20 UNEF 26.2 [1.03] 20.60 [0.81] [0.12] 45.9 [1.81] 14 24.60 [0.97] 16.85 [0.66].8750-20 UNEF 28.6 [1.13] 23.00 [0.91] [0.12] 45.9 [1.81] 16 27.60 [1.09] 20.00 [0.79] 1.0000-20 UNEF 31.0 [1.22] 24.60 [0.97] [0.12] 45.9 [1.81] 18 30.90 [1.22] 22.30 [0.88] 1.1875-18 UNEF 33.3 [1.31] 27.00 [1.06] [0.12] 45.9 [1.81] 20 33.80 [1.33] 25.75 [1.01] 1.1875-18 UNEF 36.5 [1.44] 29.40 [1.16] [0.12] 50.0 [1.97] 22 37.10 [1.46] 28.80 [1.13] 1.4375-18 UNEF 39.7 [1.56] 31.75 [1.25] [0.12] 50.0 [1.97] 24 40.25 [1.58] 32.00 [1.26] 1.4375-18 UNEF 42.8 [1.69] 34.92 [1.37] 3.73 [0.15] 50.0 [1.97] IPT 00 with Class E backshell ±0.4[.02] ±0.1 0[0.00] 8 14.20 [0.56] 20.6 [0.81] 15.10 [0.59] [0.12] 32.15 [1.27] 10 17.40 [0.69] 23.8 [0.94] 18.25 [0.72] [0.12] 32.15 [1.27] 12 20.65 [0.81] 26.2 [1.03] 20.60 [0.81] [0.12] 32.15 [1.27] 14 23.60 [0.93] 28.6 [1.13] 23.00 [0.91] [0.12] 32.15 [1.27] 16 26.85 [1.06] 31.0 [1.22] 24.60 [0.97] [0.12] 32.15 [1.27] 18 29.85 [1.18] 33.3 [1.31] 27.00 [1.06] [0.12] 32.15 [1.27] 20 33.00 [1.30] 36.5 [1.44] 29.40 [1.16] [0.12] 38.50 [1.52] 22 36.30 [1.43] 39.7 [1.56] 31.75 [1.25] [0.12] 38.50 [1.52] 24 39.50 [1.56] 42.8 [1.69] 34.92 [1.37] 3.73 [0.15] 40.10 [1.58] 34 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice.
IPT 00 wall mount receptacle - IPT 00 with Class backshell A B C 3.5 IPT 00 with Class m backshell K C B A ±0.1 8 12.2 (0.48) 10 12.2 (0.48) 12 12.2 (0.48) 14 12.2 (0.48) 16 14.5 (0.57) 18 14.5 (0.57) 20 15.8 (0.62) 22 15.8 (0.62) 24 14.9 (0.59) +0[0.00] -1[.01] B +0.1-0 8.20 (0.32) 11.40 (0.45) 14.55 (0.57) 17.50 (0.69) 20.60 (0.81) 23.15 (0.91) 26.50 (1.04) 29.60 (1.17) 32.80 (1.29) C +0-0.1 13.0 (0.51) 15.8 (0.62) 21.0 (0.83) 21.8 (0.86) 25.9 (1.02) 28.2 (1.11) 32.2 (1.27) 34.5 (1.36) 37.6 (1.48) +0-0.3 15.5 (0.61) 18.3 (0.72) 23.6 (0.93) 24.4 (0.96) 29.7 (1.17) 31.9 (1.26) 36.0 (1.42) 38.4 (1.51) 41.5 (1.63) ±0.4 20.6 (0.81) 23.8 (0.94) 26.2 (1.03) 28.6 (1.13) 31.0 (1.22) 33.3 (1.31) 36.5 (1.44) 39.7 (1.56) 42.8 (1.69) B +0.58[.02] 0[0.00] C Min ±0.4[.02] ±0.1[0.00] ±0.1 15.10 (0.59) 18.25 (0.72) 20.60 (0.81) 23.00 (0.91) 24.60 (0.97) 27.00 (1.06) 29.40 (1.16) 31.75 (1.25) 34.92 (1.37) 0[0.00] +0.1 0 3.73 (0.15) 43.5 (1.71) 42.0 (1.65) 42.0 (1.65) 42.0 (1.65) 44.0 (1.73) 44.5 (1.75) 48.5 (1.91) 48.5 (1.91) 48.5 (1.91) 8 14.0 (0.55) 16 (0.63) 6.6 (0.26) 20.6 (0.81) 15.10 (0.59) 52.0 (2.05) 18 (0.71) 10 16.0 (0.63) 18 (0.71) 9.2 (0.36) 23.8 (0.94) 18.25 (0.72) 52.0 (2.05) 21 (0.83) 12 20.0 (0.79) 22 (0.87) 12.2 (0.48) 26.2 (1.03) 20.60 (0.81) 52.0 (2.05) 24 (0.94) 14 23.0 (0.91) 25 (0.98) 15.2 (0.60) 28.6 (1.13) 23.00 (0.91) 53.0 (2.09) 28 (1.10) 16 26.0 (1.02) 28 (1.10) 18.3 (0.72) 31.0 (1.22) 24.60 (0.97) 53.0 (2.09) 31 (1.22) 18 28.5 (1.12) 32 (1.26) 20.0 (0.79) 33.3 (1.31) 27.00 (1.06) 53.0 (2.09) 34 (1.34) 20 30.5 (1.20) 34 (1.34) 23.0 (0.91) 36.5 (1.44) 29.40 (1.16) 57.0 (2.24) 37 (1.46) 22 34.5 (1.36) 38 (1.50) 26.0 (1.02) 39.7 (1.56) 31.75 (1.25) 57.0 (2.24) 41 (1.61) 24 37.5 (1.48) 41 (1.61) 28.8 (1.13) 42.8 (1.69) 34.92 (1.37) 3.73 (0.15) 58.5 (2.30) 44 (1.73) K Key 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 35
IPT 00 wall mount receptacle - IPT 00 with Class W backshell open Ø C closed ±0.4 ±0.1 Ø M 0[0.00] 8 5.85 [0.23] 4.5 [0.18] 13.90 [0.55] 20.6 [0.81] 15.10 [0.59] [0.12] 47.5 [1.87] 10 7.9 [0.31] 5.6 [0.22] 17.15 [0.68] 23.8 [0.94] 18.25 [0.72] [0.12] 47.5 [1.87] 12 11.25 [0.44] 8.6 [0.34] 20.60 [0.81] 26.2 [1.03] 20.60 [0.81] [0.12] 47.5 [1.87] 14 13.7 [0.54] 10.2 [0.40] 23.90 [0.94] 28.6 [1.13] 23.00 [0.91] [0.12] 55.5 [2.19] 16 15 [0.59] 12.5 [0.49] 27.50 [1.08] 31.0 [1.22] 24.60 [0.97] [0.12] 61.0 [2.40] 18 16.5 [0.65] 13.5 [0.53] 30.90 [1.22] 33.3 [1.31] 27.00 [1.06] [0.12] 68.0 [2.68] 20 18.5 [0.73] 15 [0.59] 34.10 [1.34] 36.5 [1.44] 29.40 [1.16] [0.12] 78.5 [3.09] 22 21.5 [0.85] 18 [0.71] 37.50 [1.48] 39.7 [1.56] 31.75 [1.25] [0.12] 83.0 [3.27] 24 22.7 [0.89]* 18.8 [0.74]* 40.30 [1.59] 42.8 [1.69] 34.92 [1.37] 3.73 [0.15] 90.0 [3.54] * Consult the factory. IPT 00 with class j backshell N E Open Closed F** ±0.75[.03] E ±0.2[.01] ±0.2[.01] ±0.1[.01] 0[0.00]. 8 5.85 [0.23] 4.5 [0.18] 4 [0.16] 19.10 [0.75] 20.6 [0.81] 15.10 [0.59] [0.12] 56 [2.20] 6-32 10 7.9 [0.31] 5.6 [0.22] 4 [0.16] 20.70 [0.81] 23.8 [0.94] 18.25 [0.72] [0.12] 56 [2.20] 6-32 12 11.25 [0.44] 8.6 [0.34] 6.4 [0.25] 23.90 [0.94] 26.2 [1.03] 20.60 [0.81] [0.12] 59 [2.32] 6-32 14 13.7 [0.54] 10.2 [0.40] 7.5 [0.30] 27.00 [1.06] 28.6 [1.13] 23.00 [0.91] [0.12] 66 [2.60] 6-32 16 15 [0.59] 12.5 [0.49] 8.3 [0.33] 28.60 [1.13] 31.0 [1.22] 24.60 [0.97] [0.12] 72 [2.83] 6-32 18 16.5 [0.65] 13.5 [0.53] 11.3 [0.44] 35.00 [1.38] 33.3 [1.31] 27.00 [1.06] [0.12] 79 [3.11] 8-32 20 18.5 [0.73] 15 [0.59] 12.7 [0.50] 35.00 [1.38] 36.5 [1.44] 29.40 [1.16] [0.12] 90 [3.54] 8-32 22 21.5 [0.85] 18 [0.71] 16.3 [0.64] 39.75 [1.56] 39.7 [1.56] 31.75 [1.25] [0.12] 95 [3.74] 8-32 24 22.7 [0.89]* 18.8 [0.74]* 16.3 [0.64] 42.10 [1.66] 42.8 [1.69] 34.92 [1.37] 3.73 [0.15] 102 [4.02] 8-32 * Consult the factory. ** Cable clamp cleats fully cosed. N Thd F 36 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice.
IPT 01 in-line receptacle - IPT 01 with Class A backshell 9.5 (0.37) E F E Min F Thread (inhes) Ø ± 0.2 [.01] 8 15.00 (0.59) 7.55 (0.30).5000-28 UNEF 17.3 (0.68) 45.9 (1.81) 10 18.20 (0.72) 10.70 (0.42).6250-24 UNEF 21.8 (0.86) 45.9 (1.81) 12 21.20 (0.83) 13.85 (0.55).7500-20 UNEF 25.1 (0.99) 45.9 (1.81) 14 24.60 (0.97) 16.85 (0.66).8750-20 UNEF 28.6 (1.13) 45.9 (1.81) 16 27.60 (1.09) 20.00 (0.79) 1.0000-20 UNEF 30.6 (1.20) 45.9 (1.81) 18 30.90 (1.22) 22.30 (0.88) 1.1875-18 UNEF 33.2 (1.31) 45.9 (1.81) 20 33.80 (1.33) 25.75 (1.01) 1.1875-18 UNEF 36.5 (1.44) 50.0 (1.97) 22 37.10 (1.46) 28.80 (1.13) 1.4375-18 UNEF 39.6 (1.56) 50.0 (1.97) 24 40.25 (1.58) 32.00 (1.26) 1.4375-18 UNEF 43.1 (1.70) 50.0 (1.97) IPT 01 with class e backshell Ø Ø. Ø ±0.2[.01]. 8 15.44 [0.61] 17.3 [0.68] 32.15 [1.27] 10 18.64 [0.73] 21.8 [0.86] 32.15 [1.27] 12 21.79 [0.86] 25.1 [0.99] 32.15 [1.27] 14 25.00 [0.98] 28.6 [1.13] 32.15 [1.27] 16 28.19 [1.11] 30.6 [1.20] 32.15 [1.27] 18 31.34 [1.23] 33.2 [1.31] 32.15 [1.27] 20 34.54 [1.36] 36.5 [1.44] 38.50 [1.52] 22 37.69 [1.48] 39.6 [1.56] 38.50 [1.52] 24 40.89 [1.61] 43.1 [1.70] 40.10 [1.58] 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 37
IPT 01 in-line receptacle - IPT 01 with Class backshell A A ±0.7[.03] Ø B -0[0.00] +0[0.00] -0.1[0.00] Ø +0[0.00] -0.3[.01] ±0.2[.01] ØB Ø 8 12.2 [0.48] 8.20 [0.32] 13.0 [0.51] 15.5 [0.61] 43.5 [1.71] 17.3 [0.68] 10 12.2 [0.48] 11.40 [0.45] 15.8 [0.62] 18.3 [0.72] 42.0 [1.65] 21.8 [0.86] 12 12.2 [0.48] 14.55 [0.57] 21.0 [0.83] 23.6 [0.93] 42.0 [1.65] 25.1 [0.99] 14 12.2 [0.48] 17.50 [0.69] 21.8 [0.86] 24.4 [0.96] 42.0 [1.65] 28.6 [1.13] 3.5 16 14.5 [0.57] 20.60 [0.81] 25.9 [1.02] 29.7 [1.17] 44.0 [1.73] 30.6 [1.20] 18 14.5 [0.57] 23.15 [0.91] 28.2 [1.11] 31.9 [1.26] 44.5 [1.75] 33.2 [1.31] 20 15.8 [0.62] 26.50 [1.04] 32.2 [1.27] 36.0 [1.42] 48.5 [1.91] 36.5 [1.44] 22 15.8 [0.62] 29.60 [1.17] 34.5 [1.36] 38.4 [1.51] 48.5 [1.91] 39.6 [1.56] 24 14.9 [0.59] 32.80 [1.29] 37.6 [1.48] 41.5 [1.63] 48.5 [1.91] 43.1 [1.70] IPT 01 with class m backshell 3.5 ±0.2 (.14 ±.01) K 4 1 3 1 2 6 2 4 5 3 8 10 12 14 16 18 20 22 24 K Key 18 [0.71] 21 [0.83] 24 [0.94] 28 [1.10] 31 [1.22] 34 [1.34] 37 [1.46] 41 [1.61] 44 [1.73] ±0.2 [.01] 17.3 [0.68] 21.8 [0.86] 25.1 [0.99] 28.6 [1.13] 30.6 [1.20] 33.2 [1.31] 36.5 [1.44] 39.6 [1.56] 43.1 [1.70] 2 +0.5[.02] -0[0.00] 16 [0.63] 18 [0.71] 22 [0.87] 25 [0.98] 28 [1.10] 32 [1.26] 34 [1.34] 38 [1.50] 41 [1.61] 3 Min 4 5 6.6 [0.26] 9.2 [0.36] 12.2 [0.48] 15.2 [0.60] 18.3 [0.72] 20.0 [0.79] 23.0 [0.91] 26.0 [1.02] 28.8 [1.13] 13.5 [0.53] 16.0 [0.63] 20.0 [0.79] 22.0 [0.87] 26.0 [1.02] 28.2 [1.11] 30.5 [1.20] 34.5 [1.36] 37.2 [1.46] M14x1 M16x1 M20x1 M23x1 M26x1 M30x1 M32x1 M36x1 M39x1 6 20 [0.79] 23 [0.91] 27 [1.06] 30 [1.18] 33 [1.30] 36 [1.42] 40 [1.57] 43 [1.69] 46 [1.81] 1 +0[0.00] -2.5[.10] 2 +1.5[.06] -0[0.00] 3 Min 4 17 [0.67] 5 [0.20] 4 [0.16] 55 [2.17] 17 [0.67] 5 [0.20] 4 [0.16] 55 [2.17] 17 [0.67] 7 [0.28] 5 [0.20] 55 [2.17] 18 [0.71] 8 [0.31] 6 [0.24] 56 [2.20] 18 [0.71] 8 [0.31] 6 [0.24] 56 [2.20] 18 [0.71] 10 [0.39] 6 [0.24] 56 [2.20] 18 [0.71] 10 [0.39] 6 [0.24] 62 [2.44] 18 [0.71] 10 [0.39] 6 [0.24] 62 [2.44] 18 [0.71] 10 [0.39] 6 [0.24] 64 [2.52] 38 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice.
IPT 01 in-line receptacle - IPT 01 with Class w backshell open closed ±0.2 8 5.85 [0.23] 4.5 [0.18] 13.90 [0.55] 17.3 [0.68] 47.5 [1.87] 10 7.9 [0.31] 5.6 [0.22] 17.15 [0.68] 21.8 [0.86] 47.5 [1.87] 12 11.25 [0.44] 8.6 [0.34] 20.60 [0.81] 25.1 [0.99] 47.5 [1.87] 14 13.7 [0.54] 10.2 [0.40] 23.90 [0.94] 28.6 [1.13] 55.5 [2.19] 16 15 [0.59] 12.5 [0.49] 27.50 [1.08] 30.6 [1.20] 61.0 [2.40] 18 16.5 [0.65] 13.5 [0.53] 30.90 [1.22] 33.2 [1.31] 68.0 [2.68] 20 18.5 [0.73] 15 [0.59] 34.10 [1.34] 36.5 [1.44] 78.5 [3.09] 22 21.5 [0.85] 18 [0.71] 37.50 [1.48] 39.6 [1.56] 83.0 [3.27] 24 22.7* [0.89] 18.8* [0.74] 40.30 [1.59] 43.1 [1.70] 90.0 [3.54] * Consult the factory. IPT 01 with class j backshell N E F Open Closed F** ±0.75 E ±0.2 Ø ±0.2 N Thread 8 5.85 [0.23] 4.5 [0.18] 4 [0.16] 19.10 [0.75] 17.3 [0.68] 56 [2.20] 6-32 10 7.9 [0.31] 5.6 [0.22] 4 [0.16] 20.70 [0.81] 21.8 [0.86] 56 [2.20] 6-32 12 11.25 [0.44] 8.6 [0.34] 6.4 [0.25] 23.90 [0.94] 25.1 [0.99] 59 [2.32] 6-32 14 13.7 [0.54] 10.2 [0.40] 7.5 [0.30] 27.00 [1.06] 28.6 [1.13] 66 [2.60] 6-32 16 15 [0.59] 12.5 [0.49] 8.3 [0.33] 28.60 [1.13] 30.6 [1.20] 72 [2.83] 6-32 18 16.5 [0.65] 13.5 [0.53] 11.3 [0.44] 35.00 [1.38] 33.2 [1.31] 79 [3.11] 8-32 20 18.5 [0.73] 15 [0.59] 12.7 [0.50] 35.00 [1.38] 36.5 [1.44] 90 [3.54] 8-32 22 21.5 [0.85] 18 [0.71] 16.3 [0.64] 39.75 [1.56] 39.6 [1.56] 95 [3.74] 8-32 24 22.7[*] 18.8[*] 16.3 [0.64] 42.10 [1.66] 43.1 [1.70] 102 [4.02] 8-32 * Consult the factory. ** Cable clamp cleats fully closed. 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 39
IPT 06 plug - IPT 06 with Class a backshell 9.5 (0.37) B Min F Thread in Inches Ø B F 8 6.6 [0.26] 15.00 [0.59].5000-28 UNEF 18.10 [0.71] 45.90 [1.81] 10 9.2 [0.36] 18.20 [0.72].6250-24 UNEF 21.05 [0.83] 45.90 [1.81] 12 12.2 [0.48] 21.20 [0.83].7500-20 UNEF 25.15 [0.99] 45.90 [1.81] 14 15.2 [0.60] 24.60 [0.97].8750-20 UNEF 28.40 [1.12] 45.90 [1.81] 16 18.3 [0.72] 27.60 [1.09] 1.0000-20 UNEF 31.60 [1.24] 45.90 [1.81] 18 20.0 [0.79] 30.90 [1.22] 1.1875-18 UNEF 35.00 [1.38] 45.90 [1.81] 20 23.0 [0.91] 33.80 [1.33] 1.1875-18 UNEF 37.70 [1.48] 50.00 [1.97] 22 26.0 [1.02] 37.10 [1.46] 1.4375-18 UNEF 40.20 [1.58] 50.00 [1.97] 24 28.8 [1.13] 40.25 [1.58] 1.4375-18 UNEF 44.00 [1.73] 50.00 [1.97] IPT 06 with class e backshell. ±0.2[.01]. 8 14.20 [0.56] 18.10 [0.71] 32.15 [1.27] 10 17.40 [0.69] 21.05 [0.83] 32.15 [1.27] 12 20.65 [0.81] 25.15 [0.99] 32.15 [1.27] 14 23.60 [0.93] 28.40 [1.12] 32.15 [1.27] 16 26.85 [1.06] 31.60 [1.24] 32.15 [1.27] 18 29.85 [1.18] 35.00 [1.38] 32.15 [1.27] 20 33.00 [1.30] 37.70 [1.48] 36.50 [1.44] 22 36.30 [1.43] 40.20 [1.58] 36.50 [1.44] 24 39.50 [1.56] 44.00 [1.73] 38.10 [1.50] 40 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice.
IPT 06 plug - IPT 06 with Class g backshell A A ±0.1[0.00] Ø -0[0.00] +0[0.00] -0.1[0.00] Ø +0[0.00] -0.3[.01] ±0.2[.01] ØB Ø 8 12.2 [0.48] 8.20 [0.32] 13.0 [0.51] 15.5 [0.61] 43.5 [1.71] 18.10 [0.71] 10 12.2 [0.48] 11.40 [0.45] 15.8 [0.62] 18.3 [0.72] 42.0 [1.65] 21.05 [0.83] 12 12.2 [0.48] 14.55 [0.57] 21.0 [0.83] 23.6 [0.93] 42.0 [1.65] 25.15 [0.99] 14 12.2 [0.48] 17.50 [0.69] 21.8 [0.86] 24.4 [0.96] 42.0 [1.65] 28.40 [1.12] 3.5 16 14.5 [0.57] 20.60 [0.81] 25.9 [1.02] 29.7 [1.17] 44.0 [1.73] 31.60 [1.24] 18 14.5 [0.57] 23.15 [0.91] 28.2 [1.11] 31.9 [1.26] 44.5 [1.75] 35.00 [1.38] 20 15.8 [0.62] 26.50 [1.04] 32.2 [1.27] 36.0 [1.42] 47.0 [1.85] 37.70 [1.48] 22 15.8 [0.62] 29.60 [1.17] 34.5 [1.36] 38.4 [1.51] 47.0 [1.85] 40.20 [1.58] 24 14.9 [0.59] 32.80 [1.29] 37.6 [1.48] 41.5 [1.63] 47.0 [1.85] 44.00 [1.73] IPT 06 with class m backshell K C B A rounding Finger A B +0.5 [.02] -0 [-0] C Min. K Key ±0.2 [.01] 8 20 [0.79] 16 [0.63] 6.6 [0.26] 18 [0.71] 55 [2.17] 18.10 [0.71] 10 23 [0.91] 18 [0.71] 9.2 [0.36] 21 [0.83] 55 [2.17] 21.05 [0.83] 12 27 [1.06] 22 [0.87] 12.2 [0.48] 24 [0.94] 55 [2.17] 25.15 [0.99] 14 30 [1.18] 25 [0.98] 15.2 [0.60] 28 [1.10] 56 [2.20] 28.40 [1.12] 16 33 [1.30] 28 [1.10] 18.3 [0.72] 31 [1.22] 56 [2.20] 31.60 [1.24] 18 36 [1.42] 32 [1.26] 20.0 [0.79] 34 [1.34] 56 [2.20] 35.00 [1.38] 20 40 [1.57] 34 [1.34] 23.0 [0.91] 37 [1.46] 60 [2.36] 37.70 [1.48] 22 43 [1.69] 38 [1.50] 26.0 [1.02] 41 [1.61] 60 [2.36] 40.20 [1.58] 24 46 [1.81] 41 [1.61] 28.8 [1.13] 44 [1.73] 62 [2.44] 44.00 [1.73] 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 41
IPT 06 plug - IPT 06 with Class w backshell Open Closed ±0.2 [.01] 8 5.85 [0.23] 4.5 [0.18] 13.90 [0.55] 18.10 [0.71] 47.5 [1.87] 10 7.9 [0.31] 5.6 [0.22] 17.15 [0.68] 21.05 [0.83] 47.5 [1.87] 12 11.25 [0.44] 8.6 [0.34] 20.60 [0.81] 25.15 [0.99] 47.5 [1.87] 14 13.7 [0.54] 10.2 [0.40] 23.90 [0.94] 28.40 [1.12] 55.5 [2.19] 16 15 [0.59] 12.5 [0.49] 27.50 [1.08] 31.60 [1.24] 61.0 [2.40] 18 16.5 [0.65] 13.5 [0.53] 30.90 [1.22] 35.00 [1.38] 68.0 [2.68] 20 18.5 [0.73] 15 [0.59] 34.10 [1.34] 37.70 [1.48] 78.5 [3.09] 22 21.5 [0.85] 18 [0.71] 37.50 [1.48] 40.20 [1.58] 83.0 [3.27] 24 22.7 [0.89]* 18.8 [0.74]* 40.30 [1.59] 44.00 [1.73] 90.0 [3.54] * Consult the factory. IPT 06 with class j backshell N E F Open Closed F** ±0.75 [.03] E ±0.2 [.01] ±0.2 [.01] 8 5.85 [0.23] 4.5 [0.18] 4 [0.16] 19.10 [0.75] 18.10 [0.71] 56.0 [2.20] 6-32 10 7.9 [0.31] 5.6 [0.22] 4 [0.16] 20.70 [0.81] 21.05 [0.83] 56.0 [2.20] 6-32 12 11.25 [0.44] 8.6 [0.34] 6.4 [0.25] 23.90 [0.94] 25.15 [0.99] 59.0 [2.32] 6-32 14 13.7 [0.54] 10.2 [0.40] 7.5 [0.30] 27.00 [1.06] 28.40 [1.12] 66.0 [2.60] 6-32 16 15 [0.59] 12.5 [0.49] 8.3 [0.33] 28.60 [1.13] 31.60 [1.24] 72.0 [2.83] 6-32 18 16.5 [0.65] 13.5 [0.53] 11.3 [0.44] 35.00 [1.38] 35.00 [1.38] 79.0 [3.11] 8-32 20 18.5 [0.73] 15 [0.59] 12.7 [0.50] 35.00 [1.38] 37.70 [1.48] 88.5 [3.48] 8-32 22 21.5 [0.85] 18 [0.71] 16.3 [0.64] 39.75 [1.56] 40.20 [1.58] 95.5 [3.76] 8-32 24 22.7 [0.89] 18.8 [0.74]* 16.3 [0.64] 42.10 [1.66] 44.00 [1.73] 100.0 [3.94] 8-32 * Consult the factory. ** Cable clamp cleats fully closed. N Thd 42 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice.
IPT 08 plug assembly - IPT 08 with Class m backshell Key 18 Only 8 ØA ± 0.2 [0.1] ØB ±0.2 [0.1] +0.1/0 [+.00/0] Ø 0 [0] -0.2 [0.1] M ±0.5 [.02] ±0.2 [.02] ØA 3.5 ±0.2 (.14 ±.01) M Ø ØA 8 19.6 [0.77] 10 12 14 16 18 20 22 24 19.05 [0.75] 22.00 [0.87] 25.50 [1.00] 30.175 [1.19] 30.175 [1.19] 36.60 [1.44] 36.60 [1.44] 44.80 [1.76] 16.20 [0.64] 18.30 [0.72] 22.30 [0.88] 25.30 [1.00] 28.30 [1.11] 32.30 [1.27] 34.30 [1.35] 38.20 [1.50] 41.30 [1.63] 6.80 [0.27] 9.30 [0.37] 12.25 [0.48] 15.40 [0.61] 18.50 [0.73] 20.20 [0.80] 23.30 [0.92] 26.00 [1.02] 29.00 [1.14] 13.50 [0.53] 15.80 [0.62] 19.80 [0.78] 22.60 [0.89] 26.00 [1.02] 28.20 [1.11] 30.50 [1.20] 34.00 [1.34] 37.20 [1.46] 13.50 [0.53] 12.50 [0.49] 13.50 [0.53] 14.50 [0.57] 14.50 [0.57] 14.50 [0.57] 14.50 [0.57] 14.50 [0.57] 14.50 [0.57] 18.10 [0.71] 21.05 [0.83] 25.15 [0.99] 28.40 [1.12] 31.60 [1.24] 35.00 [1.38] 37.70 [1.48] 40.20 [1.58] 44.00 [1.73] 34.50 [1.36] 37.50 [1.48] 37.50 [1.48] 39.20 [1.54] 44.40 [1.75] 46.60 [1.83] 50.50 [1.99] 54.40 [2.14] 55.70 [2.19] 45.50 [1.79] 45.10 [1.78] 48.00 [1.89] 49.50 [1.95] 52.70 [2.07] 56.60 [2.23] 55.80 [2.20] 59.60 [2.35] 58.60 [2.31] ØB 2017 lenair, Inc 1211 Air Way, lendale, CA 91201 818-247-6000 www.glenair.com U.S. CAE code 06324 Marine/Subsea Catalog in millimeters [inches] are subject to change without notice. 43