Atlas Copco WEDA Line Pumps (6 Hz) Pumps for professionals
Designed for Performance 6 Years of expertise and technology built into our pumps WEDA Pumps originate from the old WEDA foundry in the 195 s and the engineering company from the 196 s. The pumps were developed by engineers in Sweden, the home country of submersible pumps. Today, development and production continues in our factory in Germany. With the ability to handle fl ows up to 54 gpm and ranging upto 85 hp, WEDA can meet the demands form a wide variety of applications. Teamed up with the ATLAS COPCO world wide network you can always count on the availabilty of pumps and support, no matter where in the world you are. With our strict ISO 91 plan and sophisticated testing facilities we can guarantee the highest quality in production and material. The result: a sturdy and reliable pump supported by the world wide Atlas Copco network.
Designed for your comfort, both in pumping and servicing. Light weight, compact design Easy to move around and handle Easy to maintain and service : plug and pump built-in Pumps for professionals WEDA pumps are made for durability. Unique sealing systems and modular design makes them some of the most cost-effective pumps on the market. They are assembled by skilled mechanics and made from the highest quality materials. Easy to use and maintain, WEDA pumps promise optimal performance. Unique sealing system You can change seals, impeller and other parts in minutes. For larger pumps, the WEDA ISP (Instant Service Pack) is the optimum maintenance solution. The ISP contains the seals, bearing oil and oil housing and can easily be changed at the work site. Light weight and compact design The weight and dimensions make the WEDA pumps easy to transport, install and store also in confined areas Modular design Machined slots make it easy to separate the various parts of each pump. All stainless steel bolts and nuts used are the same size. This makes it possible to use one effective tool to complete the entire operation. www.rockdrilsales.com
WEDA Line Overview WEDA Sludge Pump WEDA 1 WEDA 3 WEDA 4 WEDA 5 WEDA 6 WEDA 7 WEDA 9 WEDA 1 WEDA 6S WEDA 1 : The contractors favorite Low weight and a low start torque for fewer electrical problems and smaller gen-sets. Built-in run capacitor /contactor Reinforced cable entry Easy access to the electrical components Adjustable discharge connection, 18 or 9 Low friction seals in one seal unit cartridge Class F insulated stators with thermo switches in all windings External plug for grease filling Adjustable lower diffuser in wear resistant nitrile rubber High chrome clog free impeller
Accessories Non-return valve Low-suction collar The WEDA 1 have a Strainers in Discharge (Hose, BSP, NPT) cost-effective sealing stainless steel solution. The WEDA 3/4 have a mechanical seal in oil. Lightweight and durable. Serial coupling The WEDA 5/6/7/9/1 Instant Service Pack (ISP) sealing solutions have the following advantages: One unit Double mechanical seals Oil and bearings integrated Float switch Capacities and technical data WEDA 1 According to ISO 996 - ANNEX A 6 5 4 2: 46V-3~ 3 1: 11V-1~ 2 1 2 4 6 8 1 12 WEDA 1 1~ 3~ 1 Rated Output HP 2 2 9 Max. power input kw 1.5 1.2 8 Rated 7 Current A 11v 13.5-6 5 4 3 2 23v 6.1 6.2 46v - 2 Shaft speed rpm 355 355 1 Discharge connection 2 2 27.5 lbs /.16 in. 14.96 in. 17.91 in. (11 V) 2 4 6 8 1 12 14 16 18 2 22 24 26 28 3 32 34 8.54 in. 8 6 4 2 Ø 7.2 in. 5 1 15 2
WEDA 3 12.2 in. According to ISO 996 - ANNEX A 1 WEDA 3 1~ 3~ 8 16 12 9 8 7 1:3L-23V-1~ 3:3N-23V-1~ 6 2:3N-4V-3~ 2:3L-4V-3~ 5 4 3 2 1 2 4 6 8 1 12 14 16 18 2 22 24 26 28 3 32 34 Rated Output HP 4 4 Max. 6 power input kw 2.7 2.3 Rated Current A 11v - - 4 23v 11 6.7 46v - 3.9 2 Shaft speed rpm 355 355 Discharge connection 3 (4 ) 3 (4 ) 44 lbs /.27 in. 18.7 in. (Low head) 19.68 in. (Med. head) 5 1 15 2 25 3 35 4 14 12 1 8 6 4 2 1 2 Ø 8.66 in. WEDA 4 According to ISO 996 - ANNEX A 8 WEDA 4 3~ 16 12.2 in. 16 Rated 14 Output HP 5 14 6 Max. 12 power input kw 4.4 12 32 34 1:4N-46V-3~ 4 2 5 1 15 2 25 3 35 4 Rated 1 Current A 11v - 8 6 4 23v 11.3 46v 5.3 Shaft speed rpm 355 2 Discharge connection 3 (4 ) Weight / max solid 1 size 2 55 3 lbs /.27 in. 4 5 6 18.7 in. 1 8 6 4 2 1 2 3 4 WEDA 5 According to ISO 996 - ANNEX A 16 14 High head 12 Medium head Low head 1 8 6 4 2 1 2 3 4 5 6 16 WEDA 5 L N H 14 Rated Output HP 8 8 9 12 Max. power input kw 5.8 4.6 9.2 1 Rated Current A 11v - - - 8 23v 19 15.2 14.5 6 46v 1 8.5 14.5 4 Shaft speed rpm 355 355 355 2 Discharge connection 4 (3 ) 4 (3 ) 3 (4 ) 1 2 3 4 5 6 7 8 N/L 121 lbs - H 139 lbs /.23 in. 29.92 in. (Med. head) 31.88 in. (High head) 25 2 15 1 Ø 8.66 in. 5 12.99 in. 2 4 6 Ø 1.9 in. (Medium head) Ø 12.28 in. (High head) 6 WEDA 6 According to ISO 996 - ANNEX A 16 14 12 High head 1 Medium head 8 6 4 2 1 2 3 4 5 6 7 8 WEDA 25 6 N H Rated Output HP 1 1 2 Max. power input kw 9.4 1.5 Rated 15 Current A 11v - - 23v 3 TBD 1 46v 15 17.9 Shaft 5 speed rpm 355 355 Discharge connection 4 (3 ) 3 (4 ) N 121 lbs - H 139 lbs /.23 in. 2 4 6 8 1 12 14 29.92 in. (Med. head) 31.88 in. (High head) 35 3 25 2 15 1 5 12.99 in. 4 8 Ø 1.9 in. (Medium head) Ø 12.28 in. (High head)
WEDA 7 8 According to ISO 996 - ANNEX A 25 2 High head 15 Low head 1 5 2 4 6 8 1 12 14 35 WEDA 7 L H 3 Rated Output HP 15 15 25 Max. power input kw 13.4 16.2 2 Rated Current A 11v - - 15 1 23v - - 46v 21.3 23.2 Shaft speed rpm 355 355 5 Discharge connection 6 (4 ) 4 (6 ) 4 8 29 lbs / 12.27 in. 16 36.2 in. 16.14 in. 16 14 12 1 8 6 4 2 1 2 Ø 14.17 in. WEDA 9 According to ISO 996 - ANNEX A 35 WEDA 16 9 L H 17.79 in. 14 3 25 2 15 1 5 High head Low head Rated 14 Output HP 36 36 Max. 12 power input kw 28.6 31 Rated 1 Current A 11v - - 8 6 23v - - 46v 43 48 4 Shaft speed rpm 29 29 2 Discharge connection 6 (4 ) 4 (6 ) 42.52 in. 12 1 8 6 4 2 14 4 8 12 16 397 lbs /.27 in. 1 2 3 4 5 6 5 1 15 2 Ø 16.14 in. WEDA 1 6 According to ISO 996 - ANNEX A 16 14 12 1 8 6 Medium head 4 2 1 2 3 4 5 6 14 WEDA 1 3~ 12 Rated Output HP 84 Max. 1 power input kw 8 Rated Current A 11v - 8 6 23v - 46v 4 127 Shaft speed rpm 175 2 Discharge connection : 1 Weight / max solid 5 size1 15 1124 2lbs /.47 25 in. 3 35 4 Ø 23.62 in. 56.5 in. WEDA 6S According to ISO 996 - ANNEX A 14 WEDA 6S 3~ 12 1 8 6 4 Medium head Rated Output HP 1 Max. power input kw 9 Rated Current A 11v - 23v - 46v 17 Shaft speed rpm 342 29.72 in. 2 Discharge connection : 3 (4 ) 6 5 1 15 2 25 3 35 4 154 lbs / 1.96 in. Ø 16.14 in.
Designed for every application Mining & Tunnels OffShore Construction Industry Generators suitable for WEDA pumps 6Hz Pump with discharge, incl. 65ft cable & built-in starter Max. P (HP) Max A Cable Min. gen set capacity QAS (Self-Excited ok) Single-phase pumps, 23v 1ph 6hz kva kva WEDA 1 2 6,1 AWG16/3 2 QAS25 WEDA 3L 4 11 AWG16/3 5 QAS25 WEDA 3N 4 11 AWG16/3 5 QAS25 Pump with discharge, incl. 65ft cable, 46 3ph 6hz WEDA 1 2 2,3 AWG16/4 2 QAS25 WEDA 3L 4 3,9 AWG16/4 4 QAS25 WEDA 3N 4 3,9 AWG16/4 4 QAS25 WEDA 4 5 5,3 AWG16/4 5 QAS25 Pump with discharge, incl. 65ft cable & built-in DOL control Max. P (HP) Max A 46v Cable Self-excited AREP or PMG 46v 3ph 6hz kva kva WEDA 5L 8 1 AWG1/4 QAS25 QAS25 WEDA 5N 8 8,5 AWG1/4 QAS25 QAS25 WEDA 5H 9 14,5 AWG1/4 QAS25 QAS25 WEDA 6N 1 15 AWG1/4 QAS45 QAS25 WEDA 6H 12 17,9 AWG1/4 QAS45 QAS25 WEDA 7L 15 21,3 AWG1/4 QAS58 QAS45 WEDA 7H 15 23,2 AWG1/4 QAS58 QAS45 WEDA 9L 36 43 AWG8/4 QAS15 QAS9 WEDA 9H 36 48 AWG8/4 QAS15 QAS9 WEDA 1 for external control 84 127 2x(AWG8/4) - QAS25 SLUDGE PUMP - Pump with discharge, incl 65ft cable for external DOL control Distibutor: 1x AWG12/2 Max. P (HP) Max A 46v Cable Self-excited AREP or PMG 46v 3ph 6hz kva kva WEDA 6S 1 16 AWG1/4 QAS45 QAS25 175 175 Old Old Covington Rd Rd NE NE Conyers GA 313 7312 Westport Place, West Palm Beach, FL 33462 1-8-451-769 www.hollandpump.com 77-483-788 2935 862 1 - Subject to modifications without prior notice. Copyright 212, Atlas Copco Airpower n.v., Wilrijk, Belgium. www.atlascopco.com