PRODUT SPEIITIONS 0 2 and Hanger Product eatures Range: 2" through 8" Material: arbon steel inish: alvanized Maximum Temperature: 60 Threads are countersunk so that they cannot become burred or damaged. Knurled swivel nut provides vertical adjustment after piping is in place. aptured swivel nut in the 2" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out. ertifications pprovals: omplies with ederal Specification --92 (Type 0) WW-H-7-E (Type 0), NSI/MSS SP-69 and MSS SP-8 (Type 0). UL Listed and M pproved (s 4" - 8"). aution: The acceptability of galvanized coatings at temperatures above 40 is at the discretion of the end user. ( " through 8") Warranty See warranty information for more details ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger rev. 02--20
PRODUT SPEIITIONS 2 0 2 and Hanger L L /2" through " pipe " through 8" pipe and Hanger: Loads (LS) Weights (LS) Dimensions (IN) Pipe To Submit Part No. Max Load Weight Rod Width /2" - " ML76 00 0.0 8 See Table elow for Dimensions " ML77 00 0.0 8 2 8 4 7 /2" ML78 00 0.0 8 2 4 7 8 7 2" ML79 00 0. 8 4 2 8 8 2 /2" ML760 2 0.20 8 4 2 4 6 " ML76 2 0.20 8 6 2 6 6 4" ML76 60 0.0 8 4 6 6 9 6 " ML76,000 0.4 2 6 4 8 9 6 6" ML766,000 0.6 2 6 6 9 6 2 4 8" ML767,000.00 2 8 7 2 6 and Hanger: Dimensions (IN) Pipe /2" 2 7 8 2 9 6 " 2 4 7 8 6 " 2 9 6 6 ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger rev. 02--20
PRODUT SPEIITIONS 0 2 and Hanger opper Product eatures Range: 2" through 4" Material: arbon steel inish: opper plated Threads are countersunk so that they cannot become burred or damaged. Knurled swivel nut provides vertical adjustment after piping is in place. aptured swivel nut will not fall off. ertifications pprovals: omplies with ederal Specification --92 (Type 0), WW-H-7-E (Type 0), NSI/MSS SP-69 and MSS SP-8 (Type 0). Warranty See warranty information for more details ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger - opper rev. 02--20
PRODUT SPEIITIONS 2 0 2 and Hanger opper 8" 8" L L /2" through " tube /2" through 4" tube and Hanger opper: Loads (LS) Weights (LS) Dimensions (IN) To Submit Part No. Max Load Weight Width /2"- " ML782 00 0.0 See Table elow for Dimensions /2" ML78 00 0.0 2 6 6 2" ML784 00 0. 7 6 2 2 2 2 /2" ML78 2 0.2 6 2 6 6 " ML786 2 0.27 4 4 8 7 8 4" ML787 60 0.48 4 8 2 /2 and Hanger opper: Dimensions (IN) /2" 2 6 7 8 " 2 6 2 9 6 " 2 6 6 4 " 2 2 8 6 ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger - opper rev. 02--20
PRODUT SPEIITIONS 0 2 elt Lined and Hanger Product eatures Range: 2" through 4" copper tube Material: arbon steel inish: alvanized Maximum Temperature: 20 Recommended for the suspension of non-insulated stationary copper tubing. The layer of felt seperates the copper tubing from the steel hanger for electrolytic resistance and also minimizes noise and vibration. Threads are countersunk so that they cannot become burred or damaged. Knurled swivel nut provides vertical adjustment after piping is in place. The captured swivel nut is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out. ertifications pprovals: omplies with ederal Specification --92 (Type 0) WW-H-7-E (Type 0), NSI/MSS SP-69 and MSS SP-8 (Type 0). Warranty See warranty information for more details ll dimensions listed are nominal. MINLINE reserves the right to Mainline elt Lined and Hanger rev. 02--20
PRODUT SPEIITIONS 2 0 2 elt Lined and Hanger elt Lined and Hanger: IPS Sizing Dimensions (IN) /2" & " tube /2" through " elted Hanger L L " through 4" tube " through 4" elted Hanger Pipe elted Hanger /2" 2 - " " " 2 /2" 2 2" 2 /2 2 /2" " 4 elt Lined and Hanger: Loads (LS) Weights (LS) Dimensions (IN) elted Hanger To Submit Part No. Max Load Weight Rod Width /2"- " /2" - " ML77 00 0.0 8 See Table elow for Dimensions ", " " ML772 00 0.0 8 See Table elow for Dimensions /2" /2" ML77 00 0.0 8 2 7 2 6 2" 2" ML774 00 0. 8 /6 2 7 6 4 2 /2" 2 /2" ML77 2 0.20 8 /6 2 6 8 " " ML776 2 0.20 8 7 7 4" 4" ML777 60 0.0 8 4 /6 4 4 elt Lined and Hanger: Dimensions (IN) elted Hanger /2" /2"- " 2 /6 /6 9 /6 " /2"- " 2 2 /6 /6 " " 2 7 8 2 6 6 " " 2 4 7 8 6 ll dimensions listed are nominal. MINLINE reserves the right to Mainline elt Lined and Hanger rev. 02--20