Mesuring/ Folding rule Telescopic length guge 39509-39513 Folding rules 39509 + Longlife Plus Coposite - Top cotings of longitudinlly rrnged glss fibre bsorb bending forces nd ssure incoprble rigidity: no expnsion (swelling) when in contct with wter - Zero-bcklsh, wer-resistnt nd dirt-resistnt joint with spring rod for uniforly high tension - Rigid 90 nd 180 locking of ll joints - Deeply ebossed pitch in 1 increents - Red-ebossed ultiple-ten nuerls - Pernent etl ends on first nd lst link - Reding on both sides with scle tht cn be red in either direction (front nd bck) - Colour grey-white 39510 101 Version - Mde of beech - Blck duplicte illietre scle - Red decil nuerls - Brss-plted steel springs - Links 3 thick - Wetherproof specil pintwork - Colour yellow I 39510 102-3 thick links de of red beech - Red decil nuerls - Two-sided c nd scle down the edges of both esuring rules - Instlled steel springs secure the ese of oveent nd unsurpssed durbility of the links - With conceled rivets I 39512 - Mde of luiniu - Nuerls nd pitch etched in drk blck - Nickel-plted steel springs - Links 1.4 thick - Spring-hrd specil pintwork, luiniu-coloured 39513 - Plstic folding rule -LONGLIFE-, white, de of glss-fibre reinforced polyide - Joints engge t right ngles - Ebossed pitch with red decil nuerls I 39513 104 - Additionl ebossing on the reverse side for convenient reding under unfvourble working conditions 39509 39510 101 39510 102 39512 103 39513 104 + Length Width Nuber of eleents 39509 39510 39512 39513 1 13 10 101 1 16 6 101 2 14 10 103 2 15 10 101 2 16 10 102 104 39515 0 - Mde of beech - With pitch - Thickness of links 3.0 - Internl plstic joints with dditionl ngle pitch I. Folding rule Advntge: Siplifies the esuring nd reding substntilly. With norl folding rule, you ust clculte bck fro 200 c when reding off the scle on the reverse side. This is cubersoe nd cn led to coputtionl errors. The unifor pitch on the front nd reverse sides relibly prevents reding errors of this nture. 39515 Length Width Nuber of links 39515 2 16 10 101 Info Added vlue of the ATORN folding rule (Ct. No. 39515) Conventionl folding rule: ATORN folding rule: It is not possible in this wy to position the esuring scle correctly. Redings fro the scle re inccurte which cn led to errors. The prllel division llows you to red the esureents in the usul wy nd ccurtely nd securely plce the esuring rod. Perfornce reuires ulity. The prllel division llows you to red the esureents in the usul wy nd ccurtely nd securely plce the esuring rod. = Sles re restricted to the pckging units entioned 39.28 Fx order hotline: +49 6204 739-1217 in the ctlogue. Purchse orders ust be in units. # = prtly extent in stock.
38130 Telescopic Length Guge M Rectngulr profile de of eloxed light etl. The profiled rods re sliding on wer-resistnt nd dustbsorbing plstic guides. Retrcting length redble through view window. Hevy-duty use thnks to inbuilt esuring tpe nd oversised rewinding device. Including crrying cse. 38130 Mesuring/ Mesuring length 38130 5 101 39517 - Stinless steel strip, pinted white - With belt stopper - A specil tretent of the stinless steel strip enbles it to unroll independently - Absolutely wtertight BMIeter - Unbrekble, durble - Very copct, lightweight nd convenient - Perfect for use s stright line - Strip lies flt on the tble ening tht diensions cn be trnsferred very well - With belt clip 39517 Length Tpe width 39517 2 16 101 3 16 102 39527 i Pnoric - The lower section of the housing is lso protected by U-shped luiniu strip - Direct reding of internl diensions in the viewing window - Pinted steel tpe - End ngle cn be oved by thickness of teril to prevent esuring errors when setting the tpe down or suspending it - Millietre pitch t top nd botto For outside nd inside esureents. 39527 Length Tpe width 39527 3 12.7 102 39528 V Housing de of ipct-proof plstics, grey. Viewer for inside esureents. Autotic tpe retrction with return sfety device. Steel tpe, yellow, less dzzle thnks to -Anti-Reflect coting, continuous grdution. Sliding end hook for stop nd hook esureents. Pocket tpe rule Video Flex Length Tpe width 39528 3 13 101 39528 39530 Housing highly ipct-resistnt de of ABS plstics, free running tpe with stop button, de of best-ulity spring steel, white enelled, illieter grdution top nd botto. For outside nd inside esureents, inside diensions re red off directly in view window. 39530 Length Tpe width 39530 3 13 101 # = prtly extent in stock. = Sles re restricted to the pckging units entioned in the ctlogue. Purchse orders ust be in units. Fx order hotline: +49 6204 739-1217 39.29
Mesuring/ Tpe rules 39531 Housing de of polyide with stinless steel bse. Mesuring tpe for inside esureentswithout stop button (free-running - pull-push-tpe). Viewing window with gnifying glss effect, grdution is not upside-down (no reding errors). Millieter grdution top nd botto. 39531 Length Tpe width 39531 2 13 101 3 13 102 39532 Housing de of ABS-plstics. With crrying loop. Autotic belt return run with stop button, cold-hrdened, stinless spring bnd de of chroe-nickel steel, tt-pickled surfce, printed pitch With red etre pre-nuerls (), with synthetic resin pint s wer protection (). For outside nd inside esureents. Length Tpe width Crrying loop 39532 2 13-101 3 13-102 5 16 x 103 39535-39536 ß Housing highly ipct-resistnt de of ABS plstics, utotic tpe retrction, with stop button, coted steel tpe, illieter grdution. For outside nd inside esureents. 39535 Without viewing window. 39536 With viewing window. 39532 39535 Length Tpe width 39535 39536 3 13 101 # 101 5 19 102 8 25 # 103 39536 39543 0 Ergonoiclly-shped housing de of ipct-proof ABS-plstics with rubber coting, reovble clip nd wrist lnyrd. Mtte, crylic-coted steel tpe with -grdution on one side. End hook with gnet for iproved fixtion. Autotic tpe retrction, stop button. 39543 201 With verticl grdution. For siple nd sfe reding of height nd lining-up. For ergonoicl work (no turning of the hed). 39543 101-103 39543 201 Length Tpe width 39543 39543 3 16 101 5 19 102 201 8 25 103 = Sles re restricted to the pckging units entioned 39.30 Fx order hotline: +49 6204 739-1217 in the ctlogue. Purchse orders ust be in units. # = prtly extent in stock.
39541 ß Ergonoiclly shped housing de of ipct-proof ABS-plstics. Stop button. Dper syste for soft tpe retrction. Tpe with nylon coting. 39541 105 Mesuring/ Length Tpe width 39541 2 16 # 101 3 16 # 102 5 19 # 103 5 25 # 104 8 25 # 105 10 25 # 106 39545 i With stop button, utotic tpe retrction nd reovble belt clip. Yellow pinted steel tpe, twocolour grdution. Corrosion-protected MYLARcoting gurntees longer service life nd protects ginst scrtches nd cheicls. For outside nd inside esureents. 39545 102 Metl housing, illieter grdution top nd botto, extr rigid. POWERLOCK 39545 104-107 Plstic housing, illieter grdution top nd botto. Fold-out hook fixed by 3 rivets voids brke of the hook. Lrger tpe widths ensures higher bend stbility. Length 10 with buffer syste. Length Tpe width Housing 39545 3 12.7 etl 102 5 19.0 plstic 104 5 25.0 plstic 105 8 25.0 plstic 106 10 25.0 plstic 107 39545 39542 ß Ergonoicl housing de of ipct-proof ABS plstics with non-slip rubber coting. Stop button. Dper syste for soft tpe retrction. Tpe with nylon coting. Length Tpe width 39542 3 16 # 101 5 19 # 102 39542 39544 Tpe rules Populr V Housing de of ipct-proof plstics, red, with grey protective coting. Autotic tpe retrction with return sfety device. Steel tpe, yellow, less dzzle thnks to -Anti-Reflect coting, continuous grdution. Sliding end hook for stop nd hook esureents. Two-prt stop for exct engging. Dping syste for soft retrction nd protection of the end hook. With belt clip. 39544 Length Tpe width 39544 3 13 101 5 19 102 8 25 103 # = prtly extent in stock. = Sles re restricted to the pckging units entioned in the ctlogue. Purchse orders ust be in units. Fx order hotline: +49 6204 739-1217 39.31
Mesuring/ Wind-Up Tpes in Cses 39549 V Ergonoiclly shped housing de of ipct-proof ABS-plstics. Hndy size thnks to specil winding. Sliding end hook, riveted nd reinforced t severl points. 2--prt brke for precision enggeent. Non-reflective coting. Dper syste for soft tpe retrction. EC ccurcy clss I. -Tri-Mtic- For outside nd inside esureents. 39549 Length Tpe width 39549 3 13 100 5 19 102 8 25 103 10 25 104 39550 Scribing Tpe Mesures TALMETER The TALMETERscle is self-winding steel tpe, it cn be utoticlly fixed with clping force of pprox. 5 kp (50 N) t ny length. Esily extendble esuring tongue with length of 100 llows inside esureents with the se grde of ccurcy nd esy hndling s outside esureents. Cobined esuring nd scribing by use of thin, hrdened steel, no need for pencil, rking possible even on steel. Accurcy of grdution 0.3 on totl length of scle. Reding of esureents without ny ngle errors. Ø of pipes nd cylinders redble by pi-scle. Cn be used for inside esureents, nd s prllel scriber nd specil divider. The tool nd not the eye deterines precision - not only during scribing but lso during esureent. When esuring with the TALMETER, the length is registered by the tool nd utoticlly stored. During rking, the length is trnsitted to the workpiece by the tool. The TALMETER cn lso be used s specil devider for rking esureents (with the edge of workpiece s centre). Ech of the three edges cn be used s knife edge or centre point. With the help of the fold-down esuring tbe, internl esureents re s esy to perfor s externl esureents. The tb is esy to fold down nd cn be stopped using the clliper (good grip). The redout indictors fcilitte the opertions of setting nd reding the guge tpe. 39550 With the utotic stop function, the esures nd/or set length is recorded. In this wy, the diension cn be pplied directly to the desired teril without needing to be red. The cobined rking nd esuring edges re there for esuring nd rking of lengths s well s for the scribing of circulr rcs. White, robust steel tpe with diensionl scel for internl nd externl esureent on top surfce, s well s dieter scle on the underside. With inkjet technology nd reflection-dping polyester pint to protect the scle length. Length Tpe width Curvture 39550 2 16 1.5 201 3 16 1.5 202 6 25 1.5 # 203 LARGE SELECTION SIMPLE SEARCH Alwys reeber! CATALOGUE VOLUME [1] The specilist ctlogue for chining nd clping technology. Experience our extensive product rnge of ulity tools fro ATORN. Perfornce reuires ulity = Sles re restricted to the pckging units entioned 39.32 Fx order hotline: +49 6204 739-1217 in the ctlogue. Purchse orders ust be in units. # = prtly extent in stock.
39552 Wind-Up Tpes in Cses ß - 3:1 Rtio for fst rolling nd unrolling - Housing de of ipct-resistnt ABS plstic with non-slip rubber coting - Folding crnk r - Tpe with nylon coting. 39552 Mesuring/ Length Tpe width 39552 15 9.5 # 101 20 9.5 # 102 30 9.5 # 103 39555-39561 Wind-Up Tpes in Cses -RADIUS - With FLEXTOP initil coting, relibly preventing brekge t the strt of the tpe - Wind-up echnis de of ipct-resistnt plstic - Soft-finish surfce iproves the grip of the wind-up body - Good hndling with big crnk r, cn be folded in - Tpe-protecting prk position for the tension ring - Crnk r cn be fitted to either side for righthnded nd left-hnded people - Tolernce cc. to EC precision clss II (+/- 2.3 on length of 10 ) 39559 Steel tpe, with polyide coting ISOLAN - One-sided pitch - Hrdened spring tpe de of crbon steel C75 - Phosphte lyer s corrosion protection - Yellow synthetic resin pint, - Printed pitch with red etre pre-nuerls, - All-sided polyide coting s prticulrly high-ulity for of wer protection - Highly protected ginst brekge, lklis, sline solutions, greses, oils nd dilute cids 39555-39561 39555 Stinless steel tpe PONTARIT - One-sided c pitch - Cold-hrdened spring tpe de of chroe-nickel steel - Mtt-pickled surfce - Printed pitch with red etre pre-nuerls, - Synthetic resin pint s wer protection, 39561 Glss fibre tpe, yellow - Two-sided c pitch - Glss fibre threds - Extruded plstic shething - Printed pitch with red etre pre-nuerls - Synthetic resin pint s wer protection - Highly flexible, non-conductive, resistnt to wter nd to virtully ll cheicls 39557 Steel tpe, pinted white - One-sided pitch - Hrdened spring tpe de of crbon steel C75 - Phosphte lyer s corrosion protection - White synthetic resin pint, - Printed pitch with red etre pre-nuerls, - Synthetic resin pint s wer protection, 39555 39557 39559 39561 Crnk r cn be fitted to either side for right-hnded nd left-hnded people Stinless steel Steel white Steel polyide Glss fibre tpe Length Tpe width 39555 39557 39559 39561 10 13 101 101 # 101 # 101 20 13 102 102 102 102 30 13 103 103 103 103 50 13 104 # = prtly extent in stock. = Sles re restricted to the pckging units entioned in the ctlogue. Purchse orders ust be in units. Fx order hotline: +49 6204 739-1217 39.33
Mesuring/ Wind-Up Tpes in Cses Wind-Up Tpes in Light Metl Fre Circuference Tpe Rules Mesuring rods 39563 Wind-Up Tpes in Cses - Steel tpe, pinted white - One-sided pitch - Hrdened spring tpe de of crbon steel C75 - Phosphte lyer s corrosion protection - White synthetic resin pint, - Printed pitch with red etre pre-nuerls, - Synthetic resin pint s wer protection, - Plstic encpsultion - Housing de of ABS plstic - Crnk echnis de of polyide - With crrying loop - Tolernce cc. to EC precision clss II (+/-2.3 over 10 length) 39563 Length Tpe width 39563 10 10 101 20 10 102 39570-39576 Wind-Up Tpes in Light Metl Fre -ERGOLINE - With FLEXTOP initil coting, relibly preventing brekge t the strt of the tpe - Optiu tpe guidnce with robust, silver nodised luiniu rils, esy to replce - Ergonoic pistol grip to relieve strin on the wrist with soft rubber lugs for secure grip - Cofortble roll-up echnis with bll berings encpsulted to prevent the ingress of dirt - Robust, replcble crnk r, cn be folded in - Tpe-protecting prk position for the tension ring - Crnk r cn be fitted to either side for righthnded nd left-hnded people - Tolernce cc. to EC precision clss II (+/- 2.3 on length of 10 ) 39570 Stinless steel tpe PONTARIT - Tpe width 13 - One-sided pitch - Stright fre - Cold-hrdened spring tpe de of chroe-nickel steel - Mtt-pickled surfce - Printed pitch with red etre pre-nuerls, - Synthetic resin pint s wer protection, 39572 Steel tpe, pinted white - Tpe width 13 - One-sided pitch - Stright fre - Hrdened spring tpe de of crbon steel C75 - Phosphte lyer s corrosion protection - White synthetic resin pint, - Printed pitch with red etre pre-nuerls, - Synthetic resin pint s wer protection, 39574 Steel tpe, with polyide coting ISOLAN - Tpe width 13 - One-sided pitch - Hrdened spring tpe de of crbon steel C75 - Phosphte lyer s corrosion protection - Yellow synthetic resin pint, - Printed pitch with red etre pre-nuerls, - All-sided polyide coting s prticulrly high-ulity for of wer protection - Highly protected ginst brekge, lklis, sline solutions, greses, oils nd dilute cids Note: ct.-no. 39574 101 with stright fre, ct.-no. 39574 103-104 with V-fre. 39576 Glss fibre tpe, yellow - Tpe width 13 - Two-sided c pitch - V-fre - Glss fibre threds - Extruded plstic shething - Printed pitch with red etre pre-nuerls - Synthetic resin pint s wer protection - Highly flexible, non-conductive, resistnt to wter nd to virtully ll cheicls 39570-39574 39570 39572 39574 39576 39574-39576 Crnk r cn be fitted to either side for right-hnded nd left-hnded people Stinless steel Steel white Steel polyide Glss fibre tpe Length Tpe width 39570 39572 39574 39576 20 13 # 101 25 13 102 102 30 13 # 103 103 103 # 103 50 13 # 104 104 104 = Sles re restricted to the pckging units entioned 39.34 Fx order hotline: +49 6204 739-1217 in the ctlogue. Purchse orders ust be in units. # = prtly extent in stock.
39580 - Millietre scle - Cover plte with Nonius (vernier) g rdution 0.1 - Precision fter fctory stndrd - Pitch lser-divided For siultneous esureent of circuference nd dieter of ll round eleents, e.g. rotry press cylinders. Circuference Tpe Rules Spring bnd steel, with etched grdution. Note: Lrger cpcities nd corrosion resistnt types re vilble on reuest. 39580 Mesuring/ Mesuring rnge circuference Mesuring rnge Ø Tpe width 39580 60-950 20-300 10 101 940-2200 300-700 10 102 2190-3460 700-1100 15 103 39799 Precision esuring rules Dzzle-free surfce with tte finish. Scle deepetched nd blck chroe-plted. Grdution top nd botto 1/1. Stinless steel. 39799 Length Width x Thickness 39799 150 13 x 0.3 101 200 13 x 0.3 102 300 13 x 0.3 103 500 18 x 0.5 104 1000 18 x 0.5 105 39800-39803 Flexible Rules - Drk-blck pitch pttern, lrgely resistnt to oils, greses nd virtully ll cheicls - Rounded edges - With suspension lug Stinless steel, hrd-rolled spring bnd steel with tt finish surfce. 39803 Pitch one-sided, top 1/2, botto 1/1. 39800 Pitch 2-sided, front side top 1/2, botto 1/1, reverse side t top nd botto 1/1. 39800-39803 One-sided pitch 2-sided pitch Length Width x Thickness 39803 39800 150 13 x 0.5 102 101 200 13 x 0.5 103 102 300 13 x 0.5 105 104 500 18 x 0.5 107 105 1000 18 x 0.5 108 106 www.torn.de Perfornce reuires ulity. For exple, with the UNICHECK universl esuring device fro ATORN. For wide vriety of esuring tsks Flexible ipleenttion thnks to different esureent ttchents Robust construction Coplete rnge of extension ccessories Perfornce reuires ulity. # = prtly extent in stock. = Sles re restricted to the pckging units entioned in the ctlogue. Purchse orders ust be in units. Fx order hotline: +49 6204 739-1217 39.35
Mesuring/ Mesuring rules Chrgers 39805-39807 Flexible Rules & - With lsered pitch nd nubering - With suspension lug Stinless spring tpe steel, tt chroe finish. 39805 Grdution top nd botto 1/1. 39807 Grdution top 1/2, botto 1/1. 39805 39807 Length Width x Thickness 39805 39807 150 13 x 0.5 101 300 15 x 0.5 103 300 30 x 1.0 104 500 20 x 0.5 105 500 30 x 1.0 106 Length Width x Thickness 39805 39807 1000 20 x 0.5 107 1000 30 x 1.0 108 1500 35 x 1.3 109 2000 35 x 1.3 110 39810 - With lsered 1/1 pitch Mesuring rods DIN 866/B Stinless steel, hrdened. 39810 Length Width x Thickness 39810 500 30 x 2 101 1000 30 x 2 102 1500 30 x 2 F 103 Length Width x Thickness 39810 2000 30 x 2 F # 104 3000 40 x 2 F # 105 39814-39815 Working rules DIN 866/B - High edges nd flt sides finely ground - Lsered 1/1 pitch Stndrd steel Stinless steel Length Width x Thickness 39814 39815 500 25 x 5 # 101 101 1000 30 x 6 # 102 # 102 1500 30 x 6 F # 103 F 103 2000 40 x 8 F # 104 F # 104 39815 Stndrd steel Stinless steel Length Width x Thickness 39814 39815 3000 40 x 5 F # 105 F # 105 4000 50 x 10 F # 106 F # 106 5000 60 x 12 F # 107 F # 107 6000 70 x 15 F # 108 F # 108 39821 0 - With glre-free 1/1 pitch nd touch-up ngle - Rust-protected Light lloy esuring scles Aluiniu section drwn, nodised. 39821 Length Width x Thickness 39821 300 50 x 5 101 400 50 x 5 102 Length Width x Thickness 39821 600 50 x 5 103 1000 50 x 5 104 39824-39825 Inspection rules DIN 866/A - Flt sides finely ground - High edges finely ground - Protective ends on both sides - Lsered 1/1 pitch Note: lso usble s stright edge! 39825 Stndrd steel Stinless steel Length Width x Thickness 39824 39825 500 30 x 6 # 101 # 101 1000 40 x 8 # 102 # 102 1500 40 x 8 F # 103 F # 103 2000 50 x 10 F # 104 F # 104 Stndrd steel Stinless steel Length Width x Thickness 39824 39825 3000 50 x 10 F # 105 F # 105 4000 60 x 12 F # 106 F # 106 5000 70 x 14 F # 107 F # 107 6000 80 x 15 F # 108 F # 108 = Sles re restricted to the pckging units entioned 39.36 Fx order hotline: +49 6204 739-1217 in the ctlogue. Purchse orders ust be in units. # = prtly extent in stock.
Info t Mesuring Scles for digitl disply - Mgnet technology - Excellent resistnce cpbility under workshop conditions - Resistnt to oil, dirt, vibrtion nd shking (IP 54) - Copct design - Accurcy: +/- 5 icrons - Resolution: 0.5 icrons - Mesuring length: 50 to 2200 - Se therl expnsion coefficient s chine tools Mesuring/ 39910-39911 Chrgers 39910 Mxi Chrger copct - Chrges btteries Mignon AA nd Micro AAA - Suitble for NiMH cells - Continuous chrging - Autotic tier shutdown fter 11 hours - Green LEDs indicte the chrge sttus of the btteries - Polrity reversl protection - Incl. of btteries: 4x Mignon AA 2000 Ah 39911 Universl chrger LCD - Chrges btteries Mignon AA, Micro AAA, Bby C, Mono D nd E-block 9V - Suitble for NiCd nd NiMH cells - For 1 to 4 round cells nd 2x 9V blocks - Chrge retention - Chrge sttus of LCD disply - Overchrge protection - Bttery defect recognition - Chrge current check 39910 39911 For rechrgeble For rechrgeble in. chrging tie for NiMH 39910 39911 bttery Sizes bttery Technology rechrgeble btteries hours AA, AAA NiMH 2 301 AA, AAA, C, D, 9V NiCd, NiMH 2 201 # = prtly extent in stock. = Sles re restricted to the pckging units entioned in the ctlogue. Purchse orders ust be in units. Fx order hotline: +49 6204 739-1217 39.37
Mesuring/ Btteries 39900 All btteries without ercury. Btteries 39900 101 39900 103 39900 212 39900 215 39900 401-405 Industril lkline - Alkline-ngnese high-perfornce cells - Ultr-odern technologies - Optiu protection ginst running out - Highest possible ulity stndrd - Excellent operting rnge (-20 - + 55 C). 39900 102 Voltge Description Pck = pcs. 39900 Volt Button cell 1.5 392/384, SR 41, SR 736 SW 1 100 Button cell 1.5 357, SR 44, SR 1154 1 101 Button cell 3.0 CR 2032 1 102 Button cell 3.0 CR 2450 1 202 Ldy 1.5 LR 1, E 90, UM 5, N 1 103 Photo 3.0 CR 123 AP, EL 123 AP 1 212 A23 12.0 A23-MN21-23GA 1 215 Button cell 3.0 CR1/3N 1 213 Button cell 1.4 AC 13 E, PR 48 8 214 Mono 1.5 EN 95, LR 20, D 1 401 Bby 1.5 EN 93, LR 14, C 1 402 Mignon 1.5 EN 91, LR 6, AA 10 303 Micro 1.5 EN 92, LR 03, AAA 10 304 E-block 9.0 EN 22, 6 LR 61, 9 Volt 1 405 39900 213 39900 401 39900 402 39900 214 39900 303 39900 304 39900 405 39902 Bttery (lithiu) - Storge cpbility for ore thn 10 yers - Functionl cpbility in brod teperturernges: -20 to +60 C - Self dischrge less thn 0.16%/onth t 23 C 39902 Voltge Description Pck = pcs. 39902 Volt E-block 9.0 6LR61 1 101 39901 Btteries (lithiu) - Ultr-odern lithiu technology - Much lighter thn lkline btteries - For defined pplictions (e.g. in digitl cers) up to 7 x longer service life thn lkline btteries - Cn be used up to 15 yers. 39901 101 39901 102 Voltge Description Pck = pcs. 39901 Volt Micro 1.5 FR03, L91, AAA 2 101 Mignon 1.5 FR6, L91, AA 2 102 39905 Rechrgeble btteries (NiMH) - Ultr-odern nickel-etl-hydrid technology (NiMH) - High chrge cpcity, so longer service life before next rechrge - No eory effect (rechrging possible t ny tie) - Environent-friendly, becuse 0% cdiu - Cn be chrged up to 1000 x, so prticulrly econoicl 39905 201 39905 202 39905 203 Voltge Cpcity Description Pck = pcs. 39905 Volt Ah Mono 1.2 2500 D 2 201 Bby 1.2 2500 C 2 202 Mignon 1.2 2300 AA 2 203 Micro 1.2 700 AAA 2 204 E-block 8.4 175 9 V 1 205 39905 204 39905 205 = Sles re restricted to the pckging units entioned 39.38 Fx order hotline: +49 6204 739-1217 in the ctlogue. Purchse orders ust be in units. # = prtly extent in stock.