Baxley Trailer Company 3300 E. Cottonwood Rd. Dothan, Al. 36301 (334) 794-2393 Fax (334) 671-1351 www.baxleycompanies.com Patents #5,988,402 #6,520,521 Patents Pending....... SB-001 Motorcycle Trailer Owner s Manual
Dear New Baxley Trailer Owner: Thank you for buying one of our unique trailers. Baxley Trailer Company is a division of Baxley Blowpipe Co. Inc., a small family company that has been in business since 1946. God has certainly blessed this company and the Baxley family in that we have been doing quality work for many of the prominent companies in the Peanut and Woodworking industries. I can brag about our quality in the fact that we are allowed to work for food service people such as M & M Mars, Hershey and Lance Inc. These companies do NOT accept sloppy workmanship. We have a reputation of fabricating items that work great and will out-last any of our competitors products. It is this same quality and sturdiness that we strive to put into each and every one of our trailers. For their uniqueness in concept, their sturdiness in design and their quality of workmanship, we feel that you have one of the best trailers that money can buy. And through our nationwide network of dealers, you have easy access to parts, accessories and service. If you ever have a problem that cannot be resolved by your dealer, or if you have any suggestions or comments, please give us a call. We would love to hear from you. It is our desire that you will always have the same joy you had when you first bought this trailer. It is our hope that this trailer will last until Jesus comes back to take His children home. It is our prayer that you will be a part of that great home going. May God bless you and keep you safe until then. Romans 6:23. Because of Him, I am, Jerome Baxley President Baxley Blowpipe Co. Inc.
Dimensions Length: 13 1 Width: 5 10 Height: 31 Weight: 640 lbs. Tires: 175/80 R 13 Tire Pressure: 50 p.s.i. Load Capacity: 1250 lbs. Trailer Ball: 2 Periodic Inspection and Maintenance 1. Check all nuts and bolts to be sure they are secure and in place before each use. 2. Check that LA Chock operates properly and occasionally lubricate the stainless rods with penetrant oil. 3. Grease the axle and suspension assembly (two grease fittings) annually or every 5000 miles. 4. Make sure wheel bearings are properly torqued and in good working order. 5. Check that lights are in good condition and operate properly.
WARNING SERIOUS INJURY AND/OR PROPERTY DAMAGE CAN RESULT IF THIS VEHICLE IS TOWED BEFORE FAMILIARIZING YOURSELF WITH THE INSTRUCTIONS IN THE OWNER S MANUAL AND THE CAUTIONS LISTED BELOW: CAUTION BEFORE TOWING THIS TRAILER CHECK THE FOLLOWING ITEMS: Coupler hitch and trailer ball are the same size. Coupler is latched. Safety chains are crisscrossed under the tongue and attached to the towing vehicle. All trailer lighting is working correctly. Load is secured to the trailer properly. Tongue jack (if trailer is equipped) is retracted. Latch bar is engaged and safety pin in place. Wheel lug nuts are properly tightened. Tires are in good condition and properly inflated. Load is within trailer capacity (1200 lbs. Max) DO NOT RIDE ON THE TRAILER OR STAND ON IT WHEN IT IS IN MOTION PERIODICALLY LUBRICATE THE STEEL RODS ON LA CHOCK NOTICE You are required to comply with all local and state requirements regarding brakes, licensing and any additional equipment that may be necessary. Contact your state motor vehicle department for more information.
Operating Instructions Please carefully read all instructions and safety warnings before operating this trailer. Refer to diagram on last page for items described. Warning: Carefully check the following before each use of the trailer: 1. Make sure all nuts and bolts are in place and tight. 2. Inspect safety cables and hitch to be sure both are properly connected and in good working order. 3. Latch bar must be secured with pin and clip before each use. 4. Make sure LA Chock operates smoothly; periodically apply a light coat of penetrant oil to stainless steel rods. I. Preparing to load motorcycle. 1. Make sure coupler is adjusted so that trailer will ride level. 2. Remove clip from safety pin, apply downward force on latch bar, and remove latch pin. Rotate latch bar out of way. 3. Grab pull bar with both hands, apply downward force, squeeze both safety latches, then raise lift bar. 4. Snug prop knob. Trailer is now ready to load. II. Loading motorcycle. 1. With trailer tilted to ground, ride or push motorcycle onto rail and forward into LA Chock. You may now dismount motorcycle and attach tie-down straps to rear of motorcycle. Note: If straps are already adjusted to proper length, simply hook them to their attach points. Straps will tighten automatically when trailer is raised to proper towing position. 2. With motorcycle in LA Chock, grab lift bar with both hands and pull downward until safety latches have engaged. Warning: make sure both safety latches have engaged before releasing pressure from lift bar. 3. Rotate latch bar and apply downward force; insert safety pin and clip. 4. Strap rear of motorcycle to strap loops on lower side of trailer frame. Be sure straps apply a forward and downward pull to cycle and that they are secure (See diagram on following page). Note: once straps are properly adjusted, they should not need to be adjusted again (see note in 1). 5. Trailer is now ready to tow. III. Unloading trailer Warning: Make sure trailer is on firm level ground before attempting to unload. Make sure everyone is a safe distance from trailer before lowering trailer. 1. Remove clip, apply downward force to latch bar, and remove pin. Rotate latch bar away from coupler. 2. Grab pull bar and apply downward force, squeeze safety latches and slowly raise lift bars, and tilt trailer to ground. 3. Snug prop knob.
4. Unhook straps, mount motorcycle and pull backward until LA Chock mechanism is disengaged. 5. Return trailer to proper towing configuration. Strap Proper Strap Location LA CHOCK ADJUSTMENT: Using a 7/16 and ½ wrench, adjust the width of BOTH the outside rod ends to the correct position. THESE ARE ROUGH GUIDELINES ONLY! SHOES SHOULD CONTACT FIRMLY ON BOTH SIDES WHEN ENGAGED. Tire width Adjustment pos. 80 to 100(MH-MM) hole #1 (innermost hole) 100 to 120(MN-MR) hole #2 130 to 150(MT-up) hole #3 160 to 180 hole #4 (outermost hole) Note: you can make finer width adjustments by setting the rod ends one position different from side to side; for example; left side on position #1 and the right side on position #2. Do not set up more than one position different from side to side.
BAXLEY TRAILER COMPANY LIMITED WARRANTY We believe Baxley Trailer Company manufactures the finest trailers available. Therefore, we extend the original purchaser of this product the following warranty from the date of purchase. FRAME: The frame and related components are warranted by Baxley Trailer Company and are applied to any part found to be defective due to material and/or workmanship. Baxley Trailer will, at its option, repair or replace defective parts to the original purchaser at no charge. The Bill of Sale will serve as proof of the date of purchase. The warranty periods are as follows: A. Frame is warranted for one year. Void if: Frame is broken or bent due to abuse. Wheel spindles or swing arm spindles are bent due to impact. Wheels are bent or broken due to impact. The trailer or its components have been subjected to non-factory alterations. B. Hubs, bearings, lights and wiring harnesses are warranted for 30 days. Warranty does not apply to items damaged in collision or due to negligence or abuse. C. Tires are covered under this warranty only if they are received by the dealer either flat or bulged. Otherwise, they are considered wear items and are not subject to warranty. E. All claims must be submitted with the following: Dated Bill of Sale including both the dealer's and the purchaser's Name, Address, and Phone Number. All warranty work must be performed by an authorized Baxley dealer. All warranties are void if the trailer has been altered, used under abnormal conditions, subjected to misuse and/or abuse, or improperly maintained. All warranty claims will be valid only if the warranty is completed and submitted to Baxley Trailer Company within 10 days after work is completed by the dealer. To insure customer satisfaction, Baxley Trailer reserves the right to call or contact the customer to inquire regarding the service they received. The Dealer is required to supply Baxley Trailer Company the product registration card so that we may keep a log of first owners as required by federal regulations. Mail warranty claims or any correspondence to: Baxley Trailer Company 3300 E. Cottonwood Road Dothan, AL 36301