Discount Codes 07 DWV-PVC through 8 22 VAC DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: February 15, 2016 Revised 2/29/2016
x FPT x MPT SP x MPT SP x SJ w/plastic Nut & Washer SP x SJ w/chrome Nut & Washer KEY:...ub FPT...Female Pipe Thread MPT...Male Pipe Thread SJ...Slip Joint SP...Spigot S&D...Sewer & Drain COUPLING D100-012 1¼ 100 80 6.96 D100-015 1½ 100 64 1.44 D100-020 2 100 36 1.98 D100-030 3 60 18 6.90 D100-040 4 25 20 11.73 D100-060 6 15 12 37.03 D100-080 8 4 16 62.08 FEMALE ADAPTER D101-012 1¼ 50 64 15.41 D101-015 1½ 100 64 2.75 D101-020 2 100 36 4.70 D101-030 3 30 36 12.53 D101-040 4 10 48 16.17 D101-060 6 10 18 52.20 D101-080 8 6 17 111.34 MALE ADAPTER D109-012 1¼ 50 144 8.05 D109-015 1½ 50 125 2.77 D109-020 2 50 125 3.72 D109-030 3 25 64 10.38 D109-040 4 25 24 23.50 D109-212 1½ x 1¼ 25 280 4.01 PIPE INCREASER - REDUCER D102-251 2 x 1½ 25 125 4.42 D102-337 3 x 1½ 25 48 12.95 D102-338 3 x 2 20 64 10.02 D102-420 4 x 2 10 64 19.76 D102-422 4 x 3 10 64 21.12 D102-532 6 x 4 4 48 82.15 D102-582 8 x 4 4 24 114.34 D102-585 8 x 6 4 24 91.93 TRAP ADAPTER, MALE D103-015 1½ 50 125 5.36 D103-020 2 25 144 17.25 D103-212 1½ x 1¼ 100 80 5.55 TRAP ADAPTER, MALE D113-012 1¼ 50 144 7.10 D113-015 1½ 50 100 5.45 D113-020 2 25 125 23.92 D113-212 1½ x 1¼ 75 96 6.19 TRAP ADAPTER, MALE D115-015 1½ 50 100 7.65 D115-020 2 25 125 29.28 D115-212 1½ x 1¼ 75 80 7.74 x FPT x SJ w/plastic Nut & Washer x SJ w/chrome Nut & Washer SP x FPT Plug x SP MPT MPT SP x TRAP ADAPTER, FEMALE D114-015 1½ 50 125 4.57 D114-020 2 50 125 8.20 D114-212 1½ x 1¼ 75 240 5.86 TRAP ADAPTER, FEMALE D104-012 1¼ 50 144 4.57 D104-015 1½ 50 80 5.31 D104-020 2 25 100 8.71 D104-212 1½ x 1¼ 50 100 5.68 TRAP ADAPTER, FEMALE D116-015 1½ 50 100 7.67 D116-020 2 25 100 14.96 D116-212 1½ x 1¼ 50 100 7.44 FITTING CLEANOUT ADAPTER D105-012 1¼ 50 225 4.68 D105-015 1½ 50 125 3.51 D105-020 2 50 80 4.50 D105-030 3 25 36 12.61 D105-040 4 10 48 20.72 D105-060 6 10 27 58.99 FITTING CLEANOUT ADAPTER + C.O. PLUG D112-015 1½ 50 100 6.07 D112-020 2 25 50 7.38 D112-030 3 25 36 17.80 D112-040 4 10 48 28.34 D112-060 6 10 18 82.83 CLEANOUT PLUG, RAISED NUT D106-012 1¼ 100 280 3.14 D106-015 1½ 50 280 2.60 D106-020 2 50 180 2.91 D106-030 3 25 125 5.20 D106-040 4 30 64 7.67 D106-060 6 10 72 24.51 D106-080 8 5 80 94.09 CLEANOUT PLUG, FLUS D110-020 2 25 240 9.45 D110-030 3 25 125 11.00 D110-040 4 25 100 11.11 FLUS BUSING D107-212 1½ x 1¼ 100 99 5.79 D107-250 2 x 1¼ 50 144 6.65 D107-251 2 x 1½ 50 125 2.51 D107-337 3 x 1½ 30 64 12.13 D107-338 3 x 2 30 64 6.35 D107-420 4 x 2 30 40 21.09 D107-422 4 x 3 30 36 10.83 D107-532 6 x 4 10 32 54.16 D107-582 8 x 4 5 18 97.72 D107-585 8 x 6 5 18 106.03 2 Pricing Effective February 15, 2016
FPT x SP Adapts DWV ub to S&D Spigot S&D x IPS SP FLUS BUSING D108-251 2 x 1½ 50 144 14.48 CAP 447-015 1½ 25 240 * 447-020 2 25 125 * 447-030 3 10 100 * 447-040 4 5 125 * 447-060 6 5 48 * 447-080 8 4 24 * * Refer to current Sch 40 Price List ADAPTER COUPLING D117-040 4 10 40 22.66 D117-422 4 x 3 20 40 20.20 ADAPTER BUSING D118-030 3 25 100 20.00 D118-040 4 10 100 8.73 NO - UB ADAPTER D119-020 2 25 125 7.65 D119-030 3 20 64 11.10 D119-040 4 15 40 14.26 UB ADAPTER, CAST IRON SOIL PIPE D122-020 2 10 125 28.59 D122-030 3 10 48 42.53 D122-040 4 10 24 42.84 SP SP x x TEST CAP, PIPE D132-015 1½ 500 280 3.08 D132-020 2 500 180 2.89 D132-030 3 250 180 3.81 D132-040 4 200 100 4.73 EXPANSION JOINT D133-015 1½ 10 125 70.32 D133-020 2 10 100 123.57 D133-030 3 15 24 152.26 D133-040 4 5 32 332.14 EXPANSION JOINT D134-015 1½ 25 64 57.25 D134-020 2 10 100 116.56 D134-030 3 15 24 127.65 D134-040 4 5 32 298.31 1/4 BEND, STREET w/low EEL INLET D293-338 3 x 2 25 16 45.52 1/4 BEND D300-012 1¼ 50 60 10.77 D300-015 1½ 100 24 3.08 D300-020 2 50 24 4.84 D300-030 3 25 16 14.23 D300-040 4 10 20 28.10 D300-060 6 5 12 94.97 D300-080 8 1 8 128.15 1/4 BEND, w/side INLET D301-337 3 x 1½ 20 20 39.22 D301-338 3 x 2 20 20 28.01 UB ADAPTER, CAST IRON SOIL PIPE D123-020 2 20 64 14.49 D123-030 3 20 32 27.49 D123-040 4 20 18 41.35 UB ADAPTER, CAST IRON SOIL PIPE INCREASER D123-251 2 x 1½ 10 180 24.07 D123-341 3 x 4 10 36 31.35 1/4 BEND, STREET D302-012 1¼ 50 60 16.29 D302-015 1½ 100 32 3.98 D302-020 2 50 32 6.10 D302-030 3 20 20 15.38 D302-040 4 10 20 28.60 D302-060 6 5 12 127.93 D302-080 8 1 32 239.64 SP REPAIR COUPLING D130-015 1½ 25 240 7.98 D130-020 2 25 125 5.57 D130-030 3 10 80 14.09 D130-040 4 5 99 27.10 TEST CAP, INSERT TYPE D131-015 1½ 100 240 3.28 D131-020 2 100 180 2.94 D131-030 3 50 125 3.57 D131-040 4 50 80 4.47 1/4 BEND, w/low EEL INLET D303-337 3 x 1½ 10 32 29.01 D303-338 3 x 2 25 16 24.70 D303-420 4 x 2 15 12 48.76 LONG SWEEP 1/4 BEND D304-015 1½ 50 36 7.13 D304-020 2 25 40 7.94 D304-030 3 10 32 18.29 D304-040 4 5 24 34.71 D304-060 6 3 12 135.65 Pricing Effective February 15, 2016 3
KEY:...ub FPT...Female Pipe Thread MPT...Male Pipe Thread SJ...Slip Joint SP...Spigot S&D...Sewer & Drain LONG SWEEP 1/4 BEND w/low EEL INLET D307-338 3 x 2 25 12 55.29 DOUBLE 1/4 BEND D327-015 1½ 20 72 12.18 D327-020 2 25 36 16.62 D327-030 3 10 27 43.41 D327-241 2 x 1½ 20 48 15.30 CLOSET BEND, REDUCING D329-422 4 x 3 25 12 22.88 LONG SWEEP 1/4 BEND, STREET D309-015 1½ 10 100 11.00 D309-020 2 25 40 11.91 D309-030 3 20 18 32.78 D309-040 4 5 24 50.50 CLOSET BEND, REDUCING D330-341 3 x 4 10 24 44.92 1/6 BEND D319-015 1½ 40 64 6.52 D319-020 2 25 64 8.38 D319-030 3 20 24 26.35 D319-040 4 10 24 41.26 1/6 BEND, STREET D320-015 1½ 40 135 13.07 D320-020 2 25 108 16.84 D320-030 3 20 60 36.32 D320-040 4 10 48 56.49 VENT ELL D331-015 1½ 20 125 6.36 D331-020 2 30 48 8.26 D331-030 3 25 20 21.41 D331-040 4 5 48 50.92 D331-060 6 4 16 160.53 D331-080 8 3 8 167.30 1/8 BEND D321-015 1½ 100 32 3.01 D321-020 2 50 32 4.33 D321-030 3 20 20 12.74 D321-040 4 10 20 22.34 D321-060 6 3 24 86.92 D321-080 8 1 32 113.80 VENT ELL, STREET D333-015 1½ 25 125 6.43 D333-020 2 20 80 9.56 D333-030 3 5 80 25.63 D333-040 4 5 40 76.41 D333-060 6 4 16 127.27 D333-080 8 3 8 327.69 1/8 BEND, STREET D323-015 1½ 100 36 2.88 D323-020 2 50 36 4.58 D323-030 3 20 24 12.07 D323-040 4 10 24 20.71 D323-060 6 3 24 102.95 D323-080 8 1 32 123.51 SANITARY TEE D400-012 1¼ 50 40 11.55 D400-015 1½ 100 18 5.36 D400-020 2 35 24 7.89 D400-030 3 30 8 20.78 D400-040 4 5 24 38.17 D400-060 6 6 8 153.28 D400-080 8 2 12 339.61 1/16 BEND D324-015 1½ 50 80 4.09 D324-020 2 25 80 5.06 D324-030 3 20 32 12.57 D324-040 4 15 24 19.87 D324-060 6 3 24 114.75 D324-080 8 2 28 187.80 1/16 BEND, STREET D326-015 1½ 50 100 11.58 D326-020 2 25 100 12.39 D326-030 3 20 36 19.47 D326-040 4 10 36 28.25 D326-060 6 3 24 111.18 D326-080 8 2 28 203.50 SP x SANITARY TEE, REDUCING D401-241 2 x 1½ x 1½ 25 40 6.95 D401-242 2 x 1½ x 2 25 36 8.43 D401-251 2 x 2 x 1½ 50 20 6.97 D401-337 3 x 3 x 1½ 20 24 15.18 D401-338 3 x 3 x 2 10 36 15.63 D401-420 4 x 4 x 2 10 24 32.84 D401-422 4 x 4 x 3 10 18 44.64 D401-532 6 x 6 x 4 6 12 148.24 SANITARY TEE, STREET D403-015 1½ 20 80 16.17 D403-020 2 25 32 15.69 D403-030 3 30 8 26.15 D403-040 4 10 16 66.03 4 Pricing Effective February 15, 2016
SP x SANITARY TEE, STREET REDUCING D404-241 2 x 1½ x 1½ 50 24 12.76 D404-242 2 x 1½ x 2 50 20 11.55 D404-251 2 x 2 x 1½ 50 20 13.82 D404-337 3 x 3 x 1½ 10 48 30.09 D404-338 3 x 3 x 2 20 24 25.83 D404-420 4 x 4 x 2 5 48 49.08 x Plug CLEANOUT TEE + C.O. PLUG D443-015 1½ 10 125 13.53 D443-020 2 10 100 15.69 D443-030 3 10 36 30.02 D443-040 4 5 32 51.91 D443-060 6 5 8 249.16 SANITARY TEE w/left SIDE INLET D416-337 3 x 1½ 10 24 56.36 D416-338 3 x 2 10 24 37.60 D416-420 4 x 2 5 24 90.69 D443-080 8 2 12 455.26 CLEANOUT TEE D445-015 1½ 20 80 10.93 D445-020 2 20 48 12.80 SANITARY TEE w/rigt SIDE INLET D417-337 3 x 1½ 10 24 54.52 D417-338 3 x 2 10 24 37.60 D417-420 4 x 2 5 24 90.69 x FPT D445-030 3 10 36 24.81 D445-040 4 10 18 44.28 D445-060 6 5 12 222.67 D445-080 8 2 12 365.33 SANITARY TEE w/r & L SIDE INLET D418-337 3 x 1½ 5 24 41.36 D418-338 3 x 2 5 32 59.66 D418-420 4 x 2 5 20 108.58 DOUBLE SANITARY TEE D428-015 1½ 25 48 11.88 D428-020 2 20 32 16.06 D428-030 3 25 8 44.90 D428-040 4 4 24 72.22 x Plug FLUS CLEANOUT TEE (Test Tee) D445-020X 2 20 48 21.72 D445-030X 3 10 36 34.85 D445-040X 4 10 18 57.62 TWO-WAY CLEANOUT D448-030 3 10 27 48.11 D448-040 4 5 27 62.27 DOUBLE SANITARY TEE, REDUCING D429-252 2 x 1½ 20 36 12.61 D429-337 3 x 1½ 20 20 26.71 D429-338 3 x 2 10 24 28.06 D429-420 4 x 2 5 40 59.73 D429-422 4 x 3 5 12 61.98 COMBINATION WYE + 1/8 BEND - LONG TURN D501-015 1½ 50 20 13.08 D501-020 2 20 24 13.90 SP x x X DOUBLE SANITARY TEE, STREET D431-030 3 10 16 63.52 D431-251 2 x 1½ 25 32 20.15 D431-338 3 x 3 x 2 x 2 25 16 22.02 DOUBLE SANITARY TEE, w/side INLET D438-337 3 x 1½ 10 16 50.06 D438-338 3 x 2 10 12 63.21 D438-420 4 x 2 10 8 134.48 (One Piece) (One Piece) D501-030 3 10 18 35.74 D501-040 4 10 8 70.82 COMBINATION WYE + 1/8 BEND - LONG TURN, REDUCING D502-241 2 x 1½ x 1½ 5 64 25.06 D502-251 2 x 2 x 1½ 20 32 18.38 D502-337 3 x 1½ 15 24 32.78 D502-338 3 x 2 10 32 24.42 D502-420 4 x 2 5 36 37.00 DOUBLE SANITARY TEE, w/r & L SIDE INLET D439-337 3 x 1½ 10 12 54.84 D439-338 3 x 2 10 12 88.71 D439-420 4 x 2 5 12 145.67 VENT TEE D441-015 1½ 25 8 20.06 D441-020 2 25 40 16.44 D441-030 3 10 36 47.89 D441-040 4 5 24 65.62 D441-060 6 4 4 131.43 D441-080 8 2 2 338.51 (Two Piece) D502-422 4 x 3 5 24 47.73 COMBINATION WYE + 1/8 BEND (Two Piece) D503-015 1½ 25 32 11.74 D503-020 2 25 16 14.31 D503-030 3 10 12 37.83 D503-040 4 5 12 88.42 D503-060 6 2 12 272.69 D503-080 8 2 4 397.30 Pricing Effective February 15, 2016 5
(Two Piece) (Three Piece) KEY:...ub FPT...Female Pipe Thread MPT...Male Pipe Thread SJ...Slip Joint SP...Spigot S&D...Sewer & Drain COMBINATION WYE + 1/8 BEND, REDUCING (Two PC) D504-338 3 x 2 10 24 38.25 D504-422 4 x 3 5 18 70.81 D504-532 6 x 4 5 8 245.26 D504-582 8 x 4 1 18 231.94 D504-585 8 x 6 1 18 394.44 DOUBLE COMBINATION WYE + 1/8 BEND (Three PC) D507-030 3 10 8 85.00 D507-040 4 5 8 185.51 D507-420 4 x 2 5 16 195.58 D507-422 4 x 3 5 12 171.16 DOUBLE FIXTURE FITTING D510-020 2 25 20 28.20 D510-030 3 5 27 59.00 D510-241 2 x 1½ 25 24 33.64 D510-329 3 x 2 x 3 x 3 5 27 56.80 WYE D600-015 1½ 50 24 9.82 D600-020 2 25 24 9.62 D600-030 3 25 8 25.95 D600-040 4 5 18 47.21 D600-060 6 4 8 137.07 D600-080 8 1 8 241.67 (Two Piece) REDUCING UPRIGT COMBINATION WYE & 1/8 BEND (Two PC) D606-251 2 x 2 x 1½ 25 24 29.76 D606-338 3 x 2 10 24 54.72 DOUBLE COTTAGE WYE w/2 INLET D610-030 3 10 12 291.73 D610-040 4 5 12 420.61 DOUBLE WYE D611-015 1½ 25 32 22.11 D611-020 2 20 27 24.70 D611-030 3 15 8 51.32 D611-040 4 5 12 104.10 D611-060 6 2 18 206.77 DOUBLE WYE, REDUCING D612-252 2 x 1½ 25 48 22.54 D612-337 3 x 1½ 10 24 44.94 D612-338 3 x 2 10 27 38.25 D612-420 4 x 2 5 24 62.43 D612-422 4 x 3 5 16 82.45 D612-532 6 x 4 3 8 289.31 COTTAGE WYE, L INLET D625-030 3 5 36 118.48 D625-040 4 5 18 157.87 SP x SP x WYE, REDUCING D601-241 2 x 1½ x 1½ 25 40 13.53 D601-251 2 x 2 x 1½ 25 32 11.83 D601-337 3 x 3 x 1½ 15 24 17.50 D601-338 3 x 3 x 2 25 12 19.20 D601-420 4 x 4 x 2 10 20 28.42 D601-422 4 x 4 x 3 10 16 38.32 D601-530 6 x 6 x 3 5 12 133.17 D601-532 6 x 6 x 4 5 12 104.17 D601-582 8 x 8 x 4 1 18 205.94 D601-585 8 x 8 x 6 1 18 227.68 WYE, STREET D602-015 1½ 50 24 18.22 D602-020 2 30 24 17.47 D602-030 3 10 24 38.02 D602-040 4 10 12 77.85 WYE, STREET, REDUCING D603-337 3 x 3 x 1½ 20 20 42.67 D603-338 3 x 3 x 2 30 12 29.88 D603-420 4 x 4 x 2 10 20 88.87 D603-422 4 x 4 x 3 10 16 82.81 UPRIGT COMBINATION WYE & 1/8 BEND (Two PC) D605-020 2 25 18 28.76 D605-030 3 10 12 51.26 COTTAGE WYE, R INLET D626-030 3 5 36 118.48 D626-040 4 5 18 157.87 RETURN BEND D700-015 1½ 20 64 9.23 D700-020 2 35 20 15.87 D700-030 3 10 24 49.22 D700-040 4 5 4 89.39 P-TRAP D706-015 1½ 25 40 10.31 D706-020 2 20 24 13.87 D706-030 3 10 16 47.18 D706-040 4 4 16 106.95 P-TRAP, LOW PROFILE D706-016 1½ 25 40 6.56 D706-021 2 20 24 9.31 6 Pricing Effective February 15, 2016
P-TRAP w/cleanout D707-015 1½ 50 20 16.93 D707-020 2 10 54 28.73 P-TRAP, UNION D708-015 1½ 25 32 13.66 D708-020 2 20 20 28.47 VAC List Price RUNNING TRAP RT-507 ¾ (½) 25 1.75 Connection is both ½ slip x ¾ spigot LA PATTERN P-TRAP D711-015 1½ 25 32 22.63 D711-212 1½ x 1¼ 10 64 36.06 Slip (SP) x Slip (SP) P - TRAP PT-507 ¾ (½) 25 1.75 Connection is both ½ slip x ¾ spigot x SJ w/plastic Nut DRUM TRAP D720-015 3 x 6 x 1½ 10 32 41.53 Slip (SP) x Slip (SP) CLEANOUT TEE 403-005 ½ 50 2.05 403-007 ¾ 50 3.18 Plug x CLOSET FLANGE (One Piece) D800-040 4 25 24 14.55 D800-422 4 x 3 25 24 11.65 Slip x Plug x Slip Includes Red Poly Plug DRAIN PAN 434-007 ¾ 25 4.55 SP CLOSET FLANGE (One Piece) D801-040 4 25 24 13.66 D801-422 4 x 3 25 24 14.89 FPT x (nut & gasket) DRAIN PAN CLOSET FLANGE w/knock OUT (One Piece) D810-422 4 x 3 25 20 14.00 Slip x (nut & gasket) 436-007 ¾ 50 1.51 436-010 1 50 1.73 CLOSET FLANGE, ADJUSTABLE w/metal RING D811-040 4 25 24 37.94 D811-422 4x3 25 24 32.47 CLOSET FLANGE, ADJUSTABLE w/metal RING D812-040 4 25 20 40.04 D812-422 4x3 25 24 33.46 SP FLUS CLOSET FLANGE w/knock OUT D815-422 4x3 25 24 22.40 OFFSET CLOSET FLANGE D822-422 w/plastic Ring 4x3 20 16 57.60 D823-422 Adjustable w/ Metal Ring 4x3 25 16 43.56 Pricing Effective February 15, 2016 7
TERMS AND CONDITIONS OF SALE 1. Terms: 2% 35 days, Net 45 Days. eadquarters 414 Morgan Street P.O. Box 116 Brownsville, TN 38012 731-772-3180 800-776-2756 Fax: 731-772-0835 Service Centers CALIFORNIA 14820 Carmenita Road, Unit B Norwalk, CA 90650 714-690-9679 / 800-995-2726 Fax: 714-736-1780 Email: warehouse80@lascofi ttings.com COLORADO 5700 East 39th Avenue Denver, CO 80207 303-575-6701 / 800-824-3675 Fax: 303-575-6706 Email: warehouse88@lascofi ttings.com FLORIDA 6800 Kingspointe Parkway, Suite 400 Orlando, FL 32819-8588 407-206-5705 / 800-437-3155 Fax: 407-515-6542 Email: warehouse84@lascofi ttings.com ILLINOIS 10350 Beaudin Blvd, Suite 800 Woodridge, IL 60517 630-597-0150 / 888-995-7414 Fax: 630-597-0156 Email: warehouse87@lascofi ttings.com PENNSYLVANIA 325 Lasley Avenue Wilkes Barre, PA 18706-1424 570-301-1170 / 800-882-5462 Fax: 570-301-1176 Email: warehouse82@lascofi ttings.com TEXAS 1600 Kelly Blvd., Suite 130 Carrollton, TX 75006 972-417-0073 / 800-642-8104 Fax: 972-417-9733 Email: warehouse81@lascofi ttings.com UTA 1641 South 700 West Salt Lake City, UT 84104 801-972-0659 / 800-833-3993 Fax: 801-972-0688 Email: warehouse89@lascofi ttings.com WASINGTON 212 Business Park, Bldg D-106 Kent, WA 98032 425-272-0990 / 888-285-2726 Fax: 425-272-0995 Email: warehouse85@lascofi ttings.com Printed in U.S.A. DWV-24 2/16 2016 LASCO Fittings, Inc. 2. Freight: FOB LASCO Fittings warehouses. DWV Products Alone: Prepaid on orders for fi ttings totaling $1500 net for one shipment to a single destination within the contiguous United States. Mixed Product Shipment (Pressure and DWV): Prepaid on orders for fi ttings totaling $1500 net for one shipment to a single destination within the contiguous United States. 3. Minimum Order: $100 net. Smaller orders billed at this minimum charge. 4. Claims for shipping errors must be made within 15 days to LASCO. Claims for damage or shortages should be directed promptly to the common carrier by the consignee. 5. Returns will be accepted only by prior authorization and if shipped freight prepaid. Returned merchandise is subject to a MINIMUM 25% handling / restocking charge. 6. Pricing is subject to change without prior notice. owever, prior notifi cation will be given in the event of price changes in the period between order placement and scheduled shipment. 7. Offer to Sell is not implied by possession of this or other LASCO price lists. LIMITED WARRANTY LASCO fi ttings are warranted to be free from manufacturing defects in materials and workmanship. They are warranted against rot, rust, and electrolytic corrosion for a period of 3 years from date of installation. If LASCO fi ttings prove defective due to manufacturing defects in material or workmanship during that period, the manufacturer will provide new replacement units of the same type and size. No remedy will be granted under this warranty if LASCO fi ttings are not used strictly in accordance with LASCO s directions with respect to use and storage or if the fi ttings have been modifi ed in any way. TE MANUFACTURER S LIABILITY UNDER EXPRESSED OR IMPLIED WARRANTY OR FOR ANY REASON IS LIMITED TO FURNIS- ING REPLACEMENT UNITS OR GRANTING A CREDIT FOR DEFECTIVE UNITS. NO LABOR EXPENSE OR CONSEQUENTIAL DAMAGES WILL BE PAID BY LASCO. TIS WARRANTY IS IN LIEU OF ALL OTER GUARANTEES AND WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCANTABILITY AND FITNESS FOR PURPOSE, EXCEPT FOR ANY WARRANTIES IMPLIED BY LAW FOR NONCOMMER- CIAL CONSUMERS. ANY SUC WARRANTIES ARE LIMITED TO TE DURATION OF TIS WRITTEN WARRANTY. DO NOT USE LASCO FITTINGS FOR COMPRESSED AIR OR GASES. DO NOT TEST PVC PIPING SYSTEMS WIT COMPRESSED AIR OR GASES. DO NOT USE FITTINGS WIT LIQUIDS NOT RECOMMENDED BY LASCO. MODIFICATIONS OF FITTINGS VOID TE WARRANTY. STANDARDS AND SPECIFICATIONS ASTM D-2665 Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings. ASTM D-1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. ASTM D-3311 Drain, Waste, and Vent (DWV) Plastic Fittings Patterns MATERIAL LASCO DWV Fittings are produced from PVC Type I, Cell Classifi cation 12454-B. PVC Fittings are listed by NSF (National Sanitation Foundation). Product is certifi ed to the Uniform Plumbing Code. Visit our worldwide website www.lascofittings.com