88

Plasma Cutting Cuts Steel, stainless steel, aluminium, cast iron, copper brass, titanium, magnesium alloys Typical Usage Metal fabrication, construction, weld repair, automotive repair, automotive racing, art and sculpting Whether you re cutting shapes in ultra thin sheet metal or cutting thick aluminium, chances are air plasma is the right tool for the job. Plasma cuts any electrically conductable material with ease and minimal distortion. Go anywhere. Cut anything. From the unique Drag gun with built-in air compressor, which runs from a household 10 amp power point to the MASTER 101 with its capacity to cut 32mm plate, we have a unit to fit your requirements. TERS PRODUCT SELECTION: Maximum Cutting Severance Model Page Thickness* Cut Gouging Suitable Metals Portable Special Features Typical Applications Drag-Gun 90 3.2mm 4.8mm Steel, alum, stainless steel Built-in air compressor Auto shops, sheetmetal fabrication 1-Phase AP40i Compact 92 9.5mm 12mm Steel, alum, stainless steel Lightweight, compact, Auto shops, remote fabrication, ultra portable, 1Torch Technology maintenance CutMaster 38 93 12.7mm 16mm Steel, alum, stainless steel Lightweight, inverter design Fabrication, agriculture, auto shops 1Torch Technology with ATC CutMaster 81 93 25.4mm 32mm Steel, alum, stainless steel Lightweight, Inverter design Fabrication, manufacturing 1Torch Technology with ATC 3-Phase CutMaster 101 94 32mm 38mm Steel, alum, stainless steel Lightweight, Inverter design Heavy fabrication, construction, 1Torch Technology with ATC weld repair, maintenance, AP 70 95 25mm 32mm Steel, alum, stainless steel Robust conventional design Fabrication, manufacturing 1Torch Technology AP 90 95 32mm 38mm Steel, alum, stainless steel Robust conventional design Heavy fabrication, construction, 1Torch Technology weld repair, maintenance *Maximum cutting capacity on mild steel CLASS: Light Industrial Industrial Heavy Industrial QUALITY KEY: Excellent Good/Fair (indicates performance within rated output range of unit) 89

DRAG-GUN 240 volt 1 phase 50Hz SUPPLY PLUG LEAD: 10 amp 30% @ 12 amps GENUINE : 3.2mm Mild Steel Light Industrial SEERANCE : 4.8mm 1.6mm 4.8mm 12 H F WEIGHT: 25kg H254mm x W229mm x D406mm 240 The Drag-Gun plasma cutting system with a built in air compressor brings complete portability to all of your sheet metal applications. The Drag-Gun delivers 1/8 cutting (3.2mm) capacity on carbon steel when operated on a 240 volt/10 amp circuit. The built- in air compressor assures clean dry air. This unique system, provides a full 12 amps of plasma cutting power. The Drag-Gun is out of the box ready to cut, JUST PLUG IT IN. The revolutionary Drag-Gun delivers price, performance and portability. The Smart Start Auto Pilot automatically restarts the cutting arc, making the Drag-Gun the ideal cutting tool for a wide variety of applications including expanded metal, HAC spiral ducting, metal studs, construction and many more. Built in air compressor Designed to operate on a 240 volt 10 amp power point Compact, lightweight & portable External compressed air not required Smart Start (auto pilot) Auto restart Transtig 280 AC/DC Plant Contents Drag-Gun Plant Contents: Drag-Gun, Work cable 4.6M and clamp, PCH-10 Torch with 6M leads, Torch spares kit, Operating Manual. Drag-Gun Part No. OTD1/1811 Plasma Cutting Torch Consumables: PCH-10 Breakdown ITEM A Tip Air OTD9/6099* B OTD9/6003 C Electrode OTD9/6006* D Gas Distributor OTD9/6007* PCH-10 70 deg Torch Head OTD9/0016 PCH-10 Torch with 6M leads Part No OTD2/1020* *Supplied with Plant Contents Roller & Radius Cutting Guide 90

Introducing the FIRST UNIERSAL Plasma Torch featuring SureLok MaximumLife electrode design FEATURES INCLUDE 1Torch is a revolutionary design that will work well with high frequency pilot systems, blow apart pilot systems and touch start pilot systems. This innovative new torch does not start by moving the tip or electrode. It starts the pilot arc by moving an independent part known as a start cartridge. This patent pending device contains a moving element that initiates the pilot arc with or without high frequency. This allows the patented SureLok MaximumLife Electrode to remain locked in place, thereby maintaining perfect tip to electrode alignment and eliminating vulnerable moving parts from the torch head itself. The result is a precise, well defined cutting arc and longer parts life. NEW MaximumLife electrode Innovative lock-in electrode 1 year torch and leads warranty New & improved parts life providing lower operating costs New tough, extremely flexible leads Ergonomic torch handle for improved comfort & less fatigue Maximum arc visibility Excellent gouging capabilities Consumables from 30-100 amps Drag cut at all current levels The MaximumLife Electrode has an innovative design that extends electrode life and performance. The 1Torch consumable parts use the same technology introduced by Thermal Dynamics with the SureLok family of plasma torches. The 1Torch electrode locks into the torch head for positive position control and efficient cooling. The shaft of the electrode has special cooling fins. This results in longer life, fewer parts changes and more productivity. 91

AP40i COMPACT 240 volt 1 phase 50Hz POWER POINT: 15 amp 40% @ 40 amps output PANEL CONTROLS: 15-40 amp variable control PANEL INDICATORS: AC Power, Over Temperature, Gas, COMMERCIAL : 9.5mm mild steel, stainless steel, aluminium 4.7mm SEERANCE : 12mm AIR PRESSURE: 450kPa Light Industrial 12mm 40 AIR FLOW: 140 lpm WEIGHT: 10kg H230mm x W185mm x D460mm 240 The 240 volt AP40i Compact is a lightweight compact and portable Air Plasma unit complete with adjustable output control (15-40 amps) and a pressure gauge and filter. This inverter produces high quality cutting performance with a smooth stable, precise Plasma cutting stream. UPGRADED 2ND QUARTER 2004 Light weight compact and portable Adjustable current setting (15-40 amps) NEW 1Torch SureLok Technology Improved torch parts life Thermal and overload LED Air pressure gauge with filter LED status lights 6M work leads Shoulder strap tig 280 AC/DC Plant Contents AP40i Compact Plant Contents: AP40i Compact, 6M work cable and clamp, 1Torch SL60, Operating Manual. AP40i Compact Part No. 661540 1Torch SL60 with 6M lead Part No. OTD7/5200 Roller & Radius Cutting Guide Plasma Torch Consumables: Electrode, MaximumLife Tip 20A, Drag Tip 30A, Drag Tip 40A Drag Plasma Torch Spare Parts: Torch Head with O-rings O-ring Torch Head (large) O-ring Torch Head (small) Starter Cartridge OTD9/8207 OTD9/8219 OTD8/3487 OTD8/3486 MANUAL PIERCING TECHNIQUE When piercing a hole through a piece of material, the torch should be laid over on approximately a 30 angle. The torch trigger switch is then depressed, introducing the arc and plasma cutting stream. Care should be taken as to the direction the torch head is facing as molten metal may be initially projected for several metres before the plasma stream pierces through the material. Once the plasma stream has pierced the material the torch should be raised up to a 90 position to complete the cut This technical tip will maximise the life of the torch consumable parts. Good cutting! 92

MASTER 38 Industrial 16mm 30 240 240 volt 1 phase 50/60Hz SUPPLY LEAD: 16amps 35% @ 30 amps output NEW 2ND QUARTER 2004 with ATC connection PANEL CONTROLS: On/Off Switch RUN/SET Switch 20-30 amp variable control PANEL INDICATORS: AC Power, Over Temperature, Gas, DC Power COMMERCIAL : 12.7mm steel, stainless steel, aluminium SEERANCE: 16mm 6.4mm AIR PRESSURE: 460kPa Thermal Dynamics introduces MASTER 38 and a new standard of excellence in metal cutting. MASTER 38 combines the reliability and rugged construction of the MASTER power supply design with the new, high performance 1Torch plasma torch to create a new standard of performance for the thin gauge to 12.7mm metal cutting world. In the Thermal Dynamics tradition of quality and innovation, MASTER 38 offers the features required for high performance plasma cutting. The new 1Torch design brings a new standard of cut quality and durability demanded by metal fabrication professionals. Rugged power source design ATC Advanced Torch Connection Supplied with 1Torch SureLok Technology Initiates pilot arc without HF Excellent cut speeds & unsurpassed cut quality Auto pilot restart for easy cutting on metal mesh Protective interlock circuit saves torch parts High visibility shield cup MaximumLife electrode improved parts life Ergonomic torch handle for comfort & control AIR FLOW: 142 lpm PACKED WEIGHT: 24kg H400mm x W254mm x D533mm MASTER 38 Plant Contents: MASTER 38 power source, 1Torch SL60 (6M), work lead (6M), Built-in regulator, Spare parts kit, Operating Manual Information: MASTER 38 Plant Part No. OTD1/4620 1Torch SL60 with 6M lead Part No. OTD7/5204 Roller & Radius Cutting Guide Plasma Torch Consumables: Electrode, MaximumLife Tip 20A, Drag Tip 30A, Drag Plasma Torch Spare Parts: Torch Head with O-rings O-ring Torch Head (large) O-ring Torch Head (small) Starter Cartridge OTD9/8219 OTD8/3487 OTD8/3486 MASTER 81 Industrial 32mm 60 415 415 volt 3 phase 50Hz SUPPLY LEAD: 16amps 50% @ 60 amps output PANEL CONTROLS: On/Off Switch, RUN/SET Switch 20-60 amp variable control PANEL INDICATORS: AC Power, Over Temperature, Gas, DC Power COMMERCIAL : 25.4mm steel, stainless steel, aluminium SEERANCE: 32mm 12.7mm AIR PRESSURE: 480kPa AIR FLOW: 190 lpm PACKED WEIGHT: 45kg H439mm x W315mm x D696mm NEW 2ND QUARTER 2004 with ATC connection Thermal Dynamics introduces MASTER 81 and a new standard of excellence in metal cutting. MASTER 81 combines the reliability and rugged construction of the MASTER power supply design with the new, high performance 1Torch plasma torch to create a new standard of performance for the thin gauge to 25.4mm metal cutting world. In the Thermal Dynamics tradition of quality and innovation, MASTER 81 offers the features required for high performance plasma cutting. The new 1Torch design brings a new standard of cut quality and durability demanded by metal fabrication professionals. Rugged power source design ATC Advanced Torch Connection Supplied with 1Torch SureLok Technology Initiates pilot arc without HF Excellent cut speeds & unsurpassed cut quality Auto pilot restart for easy cutting on metal mesh Protective interlock circuit saves torch parts High visibility shield cup MaximumLife electrode improved parts life Ergonomic torch handle for comfort & control MASTER 81 Plant Contents: MASTER 81 power source, 1Torch SL60 (6M), work lead (6M), Built-in regulator, Spare parts kit, Operating Manual MASTER 81 Plant Part No. OTD1/1120/4 1Torch SL60 with 6M lead Part No. OTD7/5204 Roller & Radius Cutting Guide Plasma Torch Consumables: Electrode, MaximumLife Tip 20A, Drag Tip 30A, Drag Tip 40A Drag Tip, 40A, Cutting Tip, 50/55A, Cutting Tip, 60A, Cutting Tip, 40A, Gouging, shallow Tip, 40-100A, Gouging, deep Body Shield Cap, Drag, 50-60A Shield Cap, Deflector Shield Cap, Gouging Plasma Torch Spare Parts: Torch Head with O-rings O-ring Torch Head (large) O-ring Torch Head (small) Starter Cartridge OTD9/8207 OTD9/8208 OTD9/8209 OTD9/8210 OTD9/8225 OTD9/8226 OTD9/8237 OTD9/8235 OTD9/8243 OTD9/8241 OTD9/8219 OTD8/3487 OTD8/3486 93

MASTER 101 415 volt 3 phase 50Hz SUPPLY LEAD: 20amps 40% @ 80 amps output PANEL CONTROLS: On/Off Switch RUN/SET Switch 20-80 amp variable control PANEL INDICATORS: AC Power, Over Temperature, Gas, DC Power COMMERCIAL : 32mm steel, stainless steel, aluminium Heavy Industrial SEERANCE: 38mm 19mm AIR PRESSURE: 480kPa 38mm 80 AIR FLOW: 190 lpm PACKED WEIGHT: 45kg H439mm x W315mm x D696mm 415 NEW 2ND QUARTER 2004 Thermal Dynamics introduces MASTER 101 and a new standard of excellence in metal cutting. MASTER 101 combines the reliability and rugged construction of the MASTER power supply design with the new, high performance 1Torch plasma torch to create a new standard of performance for the thin gauge to 32mm metal cutting world. In the Thermal Dynamics tradition of quality and innovation, MASTER 101 offers the features required for high performance plasma cutting. The new 1Torch design brings a new standard of cut quality and durability demanded by metal fabrication professionals. Rugged power source design ATC Advanced Torch Connection Supplied with 1Torch SureLok Technology Initiates pilot arc without HF Excellent cut speeds & unsurpassed cut quality Auto pilot restart for easy cutting on metal mesh Protective interlock circuit saves torch parts High visibility shield cup MaximumLife electrode improved parts life Ergonomic torch handle for comfort & control MASTER 101 Plant Part No. OTD1/1320/4 1Torch SL100 with 6M lead Part No. OTD7/5206 Roller & Radius Cutting Guide Plasma Torch Consumables: Electrode, MaximumLife Tip 20A, Drag Tip 30A, Drag Tip 40A Drag Tip, 40A, Cutting Tip, 50/55A, Cutting Tip, 60A, Cutting Tip, 70A, Cutting Tip, 80A, Cutting Tip, 90/100A, Cutting Tip, 40A, Gouging, shallow Tip, 40-100A, Gouging, deep Tip, 40-100A, Gouging, moderate Tip, 40-100A, Gouging, shallow Body Shield Cap, Drag, 50-60A Shield Cap, Drag, 70-100A Shield Cap, Deflector Shield Cap, Gouging OTD9/8207 OTD9/8208 OTD9/8209 OTD9/8210 OTD9/8231 OTD9/8211 OTD9/8212 OTD9/8225 OTD9/8226 OTD9/8227 OTD9/8228 OTD9/8237 OTD9/8235 OTD9/8236 OTD9/8243 OTD9/8241 with ATC connection MASTER 101 Plant Contents: MASTER 101 power source, 1Torch SL100 (6M), work lead (6M), Built-in regulator, Spare parts kit, Operating Manual Plasma Torch Spare Parts: Torch Head with O-rings O-ring Torch Head (large) O-ring Torch Head (small) Starter Cartridge OTD9/8219 OTD8/3487 OTD8/3486 THE ADANTAGE Thermal Dynamics SureLok torch technology is used throughout the MASTER family. SureLok torches and consumable parts offer important advantages for hand or mechanised plasma cutting. Improved cutting performance the patented electrode insertion design results in exact positioning of consumable parts, every time, with no special tools. This means a precise, well-defined cutting arc and more precise cuts. Improved torch cooling means longer consumable parts life and lower operating costs. Extended tip For maximum visibility and optimum performance in drag cutting. The extended tip provides a clear view of the cut in stand-off or drag cutting. Drag cutting with the tip in contact with the metal results in a narrow kerf, helps eliminate dross and results in greater precision on sheet metal. Tapered shield cup and small torch head allow excellent control when bevelling and gouging. SureLok s size, shape and long arc also make MASTER an excellent tool for cutting and gouging in tight spaces where other torches will not fit. Long arc length SureLok torches produce excellent cuts across a wide range of cutting conditions, from drag cutting with the tip directly on the material, to bevelling and gouging, where the tip must be held further away from material. SureLok s strong pilot arc and focused cutting power produce a long arc that gives operators more flexibility and control in demanding situations. 94

AP70 AIR Industrial 32mm 70 415 415 volt 3 phase 50Hz SUPPLY LEAD: 16amps 50% @ 70 amps output PANEL CONTROLS: Off Switch, Pressure gauge Two cutting positions PANEL INDICATORS: AC Power, Over Temperature, Gas COMMERCIAL : 25.4mm steel, stainless steel, aluminium SEERANCE: 32mm 12.7mm AIR PRESSURE: 480kPa AIR FLOW: 190 lpm PACKED WEIGHT: 83.5kg H665mm x W350mm x D690mm NEW 2ND QUARTER 2004 The AP70 Air Plasma is a conventional, robust, high duty cycle plasma cutter. The AP70 combines reliability and rugged construction with the new high performance 1Torch to create a new standard of performance, cut quality, durability and parts life demanded by metal fabrication professionals. Rugged power source design Wheeling kit included Supplied with 1Torch SureLok Technology Initiates pilot arc without HF Excellent cut speeds & unsurpassed cut quality Protective interlock circuit saves torch parts High visibility shield cup MaximumLife electrode improved parts life Ergonomic torch handle for comfort & control AP70 AIR Plant Contents: AP70 AIR power source, 1Torch SL60 (6M), work lead (6M), Built-in regulator, Spare parts kit, Operating Manual AP70 AIR Plant Part No. 661541 1Torch SL60 with 6M lead Part No. OTD7/5200 Roller & Radius Cutting Guide Plasma Torch Consumables: Electrode, MaximumLife Tip 20A, Drag Tip 30A, Drag Tip 40A Drag OTD9/8207 Tip, 40A, Cutting OTD9/8208 Tip, 50/55A, Cutting OTD9/8209 Tip, 60A, Cutting OTD9/8210 Tip, 70A, Cutting OTD9/8231 Tip, 40A, Gouging, shallow OTD9/8225 Tip, 40-100A, Gouging, deep OTD9/8226 Body OTD9/8237 Shield Cap, Drag, 50-60A OTD9/8235 Shield Cap, Deflector OTD9/8243 Shield Cap, Gouging OTD9/8241 Plasma Torch Spare Parts: Torch Head with O-rings O-ring Torch Head (large) O-ring Torch Head (small) Starter Cartridge OTD9/8219 OTD8/3487 OTD8/3486 AP90 AIR Heavy Industrial 38mm 90 415 415 volt 3 phase 50Hz SUPPLY LEAD: 20amps 50% @ 70 amps output PANEL CONTROLS: Off Switch, Pressure gauge Three cutting positions PANEL INDICATORS: AC Power, Over Temperature, Gas COMMERCIAL : 32mm steel, stainless steel, aluminium SEERANCE: 38mm 19mm AIR PRESSURE: 480kPa AIR FLOW: 190 lpm PACKED WEIGHT: 156kg H725mm x W390mm x D805mm NEW 2ND QUARTER 2004 The AP90 Air Plasma is a conventional, robust, high duty cycle plasma cutter. The AP90 combines reliability and rugged construction with the new high performance 1Torch to create a new standard of performance, cut quality, durability and parts life demanded by metal fabrication professionals. Rugged power source design Wheeling kit included Initiates pilot arc without HF Supplied with 1Torch SureLok Technology Excellent cut speeds & unsurpassed cut quality Protective interlock circuit saves torch parts High visibility shield cup MaximumLife electrode improved parts life Ergonomic torch handle for comfort & control AP90 AIR Plant Contents: AP90 AIR power source, 1Torch SL100 (6M), work lead (6M), Built-in regulator, Spare parts kit, Operating Manual AP90 AIR Plant Part No. 661542 1Torch SL100 with 6M lead Part No. OTD7/5202 Roller & Radius Cutting Guide Plasma Torch Consumables: Electrode, MaximumLife Tip 20A, Drag Tip 30A, Drag Tip 40A Drag Tip, 40A, Cutting Tip, 50/55A, Cutting Tip, 60A, Cutting Tip, 70A, Cutting Tip, 80A, Cutting Tip, 90/100A, Cutting Tip, 40A, Gouging, shallow Tip, 40-100A, Gouging, deep Tip, 40-100A, Gouging, moderate Tip, 40-100A, Gouging, shallow Body Shield Cap, Drag, 50-60A Shield Cap, Drag, 70-100A Shield Cap, Deflector Shield Cap, Gouging Plasma Torch Spare Parts: Torch Head with O-rings O-ring Torch Head (large) O-ring Torch Head (small) Starter Cartridge OTD9/8207 OTD9/8208 OTD9/8209 OTD9/8210 OTD9/8231 OTD9/8211 OTD9/8212 OTD9/8225 OTD9/8226 OTD9/8227 OTD9/8228 OTD9/8237 OTD9/8235 OTD9/8236 OTD9/8243 OTD9/8241 OTD9/8219 OTD9/3487 OTD9/3486 95

REPLACEMENT TORCH SYSTEM AND CONSUMABLES Introducing the First Universal Plasma Torch! The 1Torch RPT torch is the first plasma cutting torch that performs with virtually all plasma cutting power supplies. The 1Torch works with high frequency start systems, CD start systems, touch start systems and moving parts (blow back) start systems. Install the 1Torch on your current plasma power supply and you immediately benefit from the latest in high performance torch technology available today. Important Features Include: New Ergonomic Torch Handle With a new, innovative, easy-touse torch trigger release, encapsulated protected torch head and precisely engineered grip, the 1Torch RPT torch is both easy and comfortable to use. Extended or Protected Consumable Parts We designed our consumable parts to adapt to your cutting style. By simply changing the shield cup, you can either have: An Extended Tip for greater visibility and control and precision drag cutting at low power. A Protected Tip for on-the-plate drag cutting at high power up to 100 amps. One Year Torch & Leads Warranty Precision Engineered Torch Consumable Parts The 1Torch RPT torch introduces a completely new tip technology. Plasma gas management is an integral part of the tip design. Each tip is uniquely tuned to optimise cut performance at its rated cutting current. The result is precision gas management, longer consumable parts life and better cut performance across the entire range of 1Torch tips. Lower Consumable Parts Inventories and Costs The less than 25 consumable parts used with the 1Torch RPT torch can replace over 575 different consumable parts used over a broad range of plasma systems. New, Improved Leads 1Torch Leads are lightweight, extremely flexible and tough the ideal combination of durability and ease of use. ATC (Advanced Torch Connector) Quick Disconnect Option Our new quick disconnect design brings extra flexibility to any plasma system. Imagine being able to change out a damaged plasma cutting torch, easily convert from a hand to a machine torch operation, or simply put on a different size torch all in the matter of a few seconds and not have to use any tools to complete the task! 1Torch RPT torch and ATC connector are patent pending. 96

REPLACEMENT TORCH SYSTEM AND CONSUMABLES One Torch for irtually Any Plasma Cutting System! Selecting the Right Torch Package for Your Needs... It s as easy as 1, 2, 3! 1 1Torch and Leads Selection Chart 1 (pg. 98) gives you all the information you ll need to select the right torch. Torches are grouped into two sections SL60 and SL100 Hand Torches. Find the appropriate section, decide whether the standard RPT connection or the ATC Torch Connection is right for you, then select the torch with the desired amperage range and leads length. 2 2Adaptor Kit Selection Select the appropriate Adaptor Kit from Chart 2 (pg. 99). If you selected a torch with the ATC Connection, you will also need an ATC Receptacle Adaptor (see Chart 1). 3 3Spare Parts Selection From Chart 3 (pg. 99), select an RPT Spare Parts Kit or specific consumable parts that best suit your cutting requirements. Torch Connection Options The diagram below shows the differences between the Standard RPT and the ATC Torch connections. Standard RPT Connection A Power Supply RPT (O2B) Torch Adaptor Kit ATC Torch Connection B ATC ATC Adaptor Kit Torch Adaptor Kit Power Supply 97

REPLACEMENT TORCH SYSTEM AND CONSUMABLES 1 Torch and Lead Selection Listed below are the Torch and Lead selection charts for the SL60 and SL100 Hand 1Torch RPT torches. ORDERING INFORMATION Hand Torches SL60 Light/Medium Duty Torch 20-60 Amps Duty Cycle 100% @ 60 Amps SL100 Medium/Heavy Duty Torch 30-100 Amps Duty Cycle 100% @ 100 Amps A CAT NO. Standard RPT (O2B) Torch Connection A CAT NO. Standard RPT (O2B) Torch Connection Torch & Leads Torch & Leads SL60 Hand Torch (20-60 Amps) 7-5200 SL60, 75, 20 (6.1m) Torch/Leads SL100 Hand Torch (30-100 Amps) 7-5202 SL100, 75, 20 (6.1m) Torch/Leads B ATC Torch Connection B ATC Torch Connection Torch & Leads Torch & Leads SL60 Hand Torch w/ ATC (20-60 Amps) 7-5204 *SL60, 75, 20 (6.1m) Torch/Leads SL100 Hand Torch w/ ATC (30-100 Amps) 7-5206 *SL100, 75, 20 (6.1m) Torch/Leads * This receptacle adaptor is required for each power supply using an ATC torch connection. This is connected to the torch adaptor kit specific to each power supply. ATC Adaptor Kit ATC Receptacle Adaptor 7-5207 ATC Receptacle Connector ATC Adaptor Kit ATC Receptacle Adaptor 7-5207 ATC Receptacle Connector * This receptacle adaptor is required for each power supply using an ATC torch connection. This is connected to the torch adaptor kit specific to each power supply. NOTES: *Total lead length including torch should not exceed the maximum length specified by the power supply manufacturer. 98

REPLACEMENT TORCH SYSTEM AND CONSUMABLES Torch Adaptor Kits The model of the plasma cutting system must be known to determine the adaptor kit required. Manufacturer Power Supply Model Catalogue Number 2 the Hand 1Torch RPT torch. Adaptor Kit Selection Listed below is the Adaptor Kit selection charts for Manufacturer Power Supply Model Catalogue Number THERMAL DYNAMICS PAK 3XR, 5XT, 5XR, 625XR, 7-3446 PAK 8XR, 10XR, 1250XR, 7-3434 PakMaster 75, 100 PakMaster 50XL/XLP, 75XL/XLP, 100XL/XLP 7-3447 MASTER 50, 75, 100 PakMaster 25, 38XL, EconoPAK 25 7-3443 Drag-Gun 38, PAK 2XT, PakMaster 50 w/ Smart Torch (Q.D.) 7-3445 PAK 5 7-3444 PAK 10 7-3436 HYPERTHERM Max 42*, 43 *, 40cs * 7-3454 powermax 600*, 800 *, 900 * w/ Q.D. powermax 1100* 7-3455 powermax 1000*, 1250 * 7-3461 Max 40cs* (w/o Q.D.) 7-3476 powermax 380* 7-3477 powermax 600* w/o Q.D. 7-3480 powermax 800*, 900 * w/o Q.D. 7-3481 powermax 1650 7-3483 powermax 350 7-3484 powermax 190C 7-3485 LINCOLN Pro-Cut 60 7-3431 NOTES: Each Adaptor Kit includes connection fitting, electrical connectors and installation instruction sheets for the selected power supply. HYPERTHERM, Max and powermax are registered trademarks of Hypertherm, Inc.; THERMAL DYNAMICS, PAK, MASTER, PakMaster, EconoPAK, Dynapak and Drag-Gun are registered trademarks of Thermal Dynamics Corp. ORDERING INFORMATION Description Part No. Description 1TORCH CONSUMABLES / PARTS O-Ring O-Ring Electrode, MaximumLife Start Cartridge Tip, 20A, Drag Tip, 30A, Drag Tip, 40A, Drag Tip, 40A, Cutting Tip, 50/55A, Cutting Tip, 60A, Cutting Tip, 70A, Cutting Tip, 80A, Cutting Tip, 90/100A, Cutting Tip,A, Gouging Tip, B, Gouging Tip, C, Gouging Tip, D, Gouging Body, MaximumLife Shield Cap, Drag, 40A Shield Cap, Drag, 50-60A Shield Cap, Drag, 70-100A Shield Cap, Mach, 40A Shield Cap, Mach, 50-60A Shield Cap, Mach, 70-100A Shield Cap, Deflector Shield Cap, Gouging OTD8/3487 OTD8/3486 OTD9/8207 OTD9/8208 OTD9/8209 OTD9/8210 OTD9/8231 OTD9/8211 OTD9/8212 OTD9/8225 OTD9/8226 OTD9/8227 OTD9/8228 OTD9/8237 OTD9/8244 OTD9/8235 OTD9/8236 OTD9/8245 OTD9/8238 OTD9/8239 OTD9/8243 OTD9/8241 Cat. No. SL60 / SL100 1Torch Parts Spare Parts Selection 3 99

REPLACEMENT TORCH SYSTEM AND CONSUMABLES Thermal Dynamics SureLok torch technology is used throughout the MASTER family. SureLok torches and consumable parts offer important advantages for hand or mechanised plasma cutting. Improved cutting performance the patented electrode insertion design results in exact positioning of consumable parts, every time, with no special tools. This means a precise, well-defined cutting arc and more precise cuts. Improved torch cooling means longer consumable parts life and lower operating costs. Extended tip For maximum visibility and optimum performance in drag cutting. the extended tip provides a clear view of the cut in stand-off or drag cutting. Drag cutting with the tip in contact with the metal results in a narrow kerf, helps eliminate dross and results in greater precision on sheet metal. Tapered shield cup and small torch head allow excellent control when bevelling and gouging. SureLok s size, shape and long arc also make MASTER an excellent tool for cutting and gouging in tight spaces where other torches will not fit. Long arc length SureLok torches produce excellent cuts across a wide range of cutting conditions, from drag cutting with the tip directly on the material, to bevelling and gouging, where the tip must be held further away from material. SureLok s strong pilot arc and focused cutting power produce a long arc that gives operators more flexibility and control in demanding situations. ACCESSORIES & Roller and Radius Cutting Guide This complete plasma roller guide kit can be used in conjunction with all Thermal Dynamics and many other brands of plasma torch. Cutting of shapes, circles or just straight lines become quick and easy with the roller guide system. Optimum tip height above the work piece is maintained at all times, improving efficiency and maximising the torch consumable parts life. Allows constant, optimum tip height Improved cut quality Enhanced tip life Adaptable for cutting straight lines, circles and bevelling Magnetic pivots for steel cutting Suction pivots for non ferrous metals Fits all thermal Dynamics torches and most other brands of torches Roller and Radius Cutting Guide 100