V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and flow controls Dual spool technology V40 Glandless spool and sleeve V4 Softseal spool Collected pilot exhaust with internal pilot air supply Easy to convert from internal to external pilot supply Shut-off plate allows for exchange of valves under pressure Technical data Medium Compressed air, 40µm filtered, lubricated or non-lubricated Operation V40: Glandless spool valve, solenoid pilot or air pilot actuated V4: Softseal spool valve, solenoid pilot or air pilot actuated Mounting On sub-bases Size ISO 407- / VDMA 4 6, 8 mm Operating Pressure Maximum pressure psig (0 bar) V4 models and V40 solenoid pilot actuated valves with internal pilot supply psig (6 bar) V40 solenoid pilot actuated valves with external pilot supply and V40 air pilot actuated valves Characteristics Series Function l/min V40 / 0.8 70 V40 / 0.6 60 V4* x/.6 60 V4* / 0.66 60 V4* / 0.69 680 Ambient Temperature F* to F (- C* to 0 C) V40/V4 sol. and V4 air pilot models F* to 76 F (- C* to 80 C) V40 air pilot models *Consult our Application Engineering for use below 6 F ( C) Materials Die cast aluminum body and sub-base. Hard anodized spool, PTFE coated, matched aluminum spool and sleeve(v40) or aluminum alloy spool with HNBR Seals (V4). POM plastic parts and NBR static seals. End cover and screws zinc plated, stainless steel springs. Electrical Details for Solenoid Voltage Tolerances -0% / +% Rating 00% Continuos Duty Inlet orifice 0.8 mm Electrical Connection DIN 4 60 table C Manual Override Push and turn locking and nonlocking Protection Class IP 6 NEMA 4 Materials PPS (body), FPM and NBR (seals) VAL-74
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm x/ Solenoid Actuated Valves (Softseal Spool only) 0 0 Function x/ Supply Exhaust Actuation / Function Operating Pres. psig Pres. lb. Repair Kit V4AD-C** NC Internal Collected Sol/Spring 0.6 6 - - 0.40 V70447-KO 8 0 0 0 0 8 V4AD-C** NC External Not Collected Sol/Spring 0.6 0-4.7+(0. x op.press.) 0.40 V70447-KO V4BD-C** NO Internal Collected Sol/Spring 0.6 6 - - 0.40 V70448-KO 8 0 0 8 0 0 0 V4BD-C** NO External Not Collected Sol/Spring 0.6 0-4.7+(0. x op.press.) 0.40 V70448-KO V4CD-C** NO/NC Internal Collected Sol/Spring 0.6 6 - - 0.40 V70449-KO 8 0 0 8 0 V4CD-C** NO/NC External Not collected Sol/Spring 0.6 0-4.7+(0. x op.press.) NC = Normally Closed NO = Normally Open 0.40 V70449-KO / Solenoid Actuated Valves 8 8 8 Spool Techn. Supply Exhaust Operator Return Operating Pres. Pres. lb. Repair Kit V40D-C** Gl Internal Collected Solenoid Air Spring 0.8. - - 0.6 V70440-KO V4D-C** Ss Internal Collected Solenoid Air Spring 0.66. - - 0.9 V7044-KO V40D-C** Gl External Not collected Solenoid Air Spring 0.8 6 Hg -. - 0.6 V70440-KO V4D-C** Ss External Not collected Solenoid Air Spring 0.66 6 Hg -. - 0.9 V7044-KO V406D-C** Gl Internal Collected Solenoid Spring & air 0.8. - - 0.9 V70440-KO V47D-C** Ss Internal Collected Solenoid Spring 0.66 9 - - 0.9 V7044-KO V406D-C** Gl External Not collected Solenoid Spring & air 0.8 6 Hg -. - 0.9 V70440-KO V47D-C** Ss External Not collected Solenoid Spring 0.66 6 Hg - 9-0.9 V7044-KO V40D-C** Gl Internal Collected Solenoid Solenoid 0.8 9 - - 0.40 V7044-KO V4D-C** Ss Internal Collected Solenoid Solenoid 0.66 9 - - 0.40 V7044-KO V40D-C** Gl External Not collected Solenoid Solenoid 0.8 6 Hg - 9-0.40 V7044-KO V4D-C** Ss External Not collected Solenoid Solenoid 0.66 6 Hg - 9-0.40 V7044-KO V409D-C** Gl Internal Collected Solenoid (priority) Solenoid 0.8 9 - - 0.40 V7044-KO 8 V409D-C** Gl External Not collected Solenoid (priority) Solenoid 0.8 6 Hg - 9-0.40 V7044-KO 8 / ** Insert voltage code from Table Voltage Codes and Spare Valves. Add connector code from Table Connector Codes and Part Number. Gl = Glandless Spool Ss = Soft Seal Table **Voltage Codes and Spare Valves Voltage Code Power Inrush / Hold Valve Part. -no. Push only Push and Turn VDC. W VZC7LC-CA 4 VDC. W VZC7LC-CA VZC7LC-CA 4 V 0/60 Hz.. /. VA VZC7LC-CA 48 V 0/60 Hz 6. /. VA VZC7LC-C6A 0 VDC 7 W VZC7LC-C7A V 0/60 Hz 8. /. VA VZC7LC-C8A VZC7LC-C8A 0 V 0/60 Hz 9. /. VA VZC7LC-C9A Other voltages available on request. Spare pilot valves are delivered with mounting screws. Table Connector Codes and Part Number Code Part Number A = Solenoid without connector B = Cable grip V007-D00 C = 0 ft. molded cable, 0-40 VAC/VDC V00-D0 H = Cable grip w/indicator light, 4 VAC/VDC V00-D J = Cable grip w/indicator light, 0 VAC/VDC V00-D8 = 0 ft. molded cable with indicator light, surge suppression, 4 VAC/VDC V00-D0 6 = 0 ft. molded cable with indicator light, 0V/0 Hz-0V.60Hz V00-D0 VAL-7
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm / Solenoid Actuated Valves 8 8 8 8 8 8 Spool Techn. Valve Function Supply Exhaust Operator Return Operating Pres. Pres. lb. Repair Kit V406D-C** Gl APB Internal Collected Solenoid Solenoid 0.6 9 - - 0.40 V7044-KO V46D-C** Ss APB Internal Collected Solenoid Solenoid 0.69 9 - - 0.40 V70444-KO V406D-C** Gl APB External Not collected Solenoid Solenoid 0.6 6 Hg - 9-0.40 V7044-KO V46D-C** Ss APB External Not collected Solenoid Solenoid 0.69 6 Hg - 9-0.40 V70444-KO V407D-C** Gl COE Internal Collected Solenoid Solenoid 0.6 9 - - 0.40 V7044-KO V47D-C** Ss COE Internal Collected Solenoid Solenoid 0.69 9 - - 0.40 V7044-KO V407D-C** Gl COE External Not collected Solenoid Solenoid 0.6 6 Hg - 9-0.40 V7044-KO V47D-C** Ss COE External Not collected Solenoid Solenoid 0.69 6 Hg - 9-0.40 V7044-KO V408D-C** Gl COP Internal Collected Solenoid Solenoid 0.6 9 - - 0.40 V7044-K0 V48D-C** Ss COP Internal Collected Solenoid Solenoid 0.69 9 - - 0.40 V70446-KO V4048D-C** Gl COP External Not collected Solenoid Solenoid 0.6 6 Hg - 9-0.40 V7044-KO V48D-C** Ss COP External Not collected Solenoid Solenoid 0.69 6 Hg - 9-0.40 V70446-KO ** Insert voltage code from Table Voltage Codes and Spare Valves. Add connector code from Table Connector Codes and Part Number. Table **Voltage Codes and Spare Valves Voltage Code Power Inrush / Hold Valve Part.-no. Push only Push and Turn VDC. W VZC7LC-CA 4 VDC. W VZC7LC-CA VZC7LC-CA 4 V 0/60 Hz.. /. VA VZC7LC-CA 48 V 0/60 Hz 6. /. VA VZC7LC-C6A 0 VDC 7 W VZC7LC-C7A V 0/60 Hz 8. /. VA VZC7LC-C8A VZC7LC-C8A 0 V 0/60 Hz 9. /. VA VZC7LC-C9A Other voltages available on request. Spare pilot valves are delivered with mounting screws. Gl = Glandless Spool Ss = Soft Seal Table Connector Codes and Part Number APB = All Ports Blocked COE = Center Open to Exhaust COP = Center Open to Pressure Code Part Number A = Solenoid without connector B = Cable grip V007-D00 C = 0 ft. molded cable, 0-40 VAC/VDC V00-D0 H = Cable grip w/indicator light, 4 VAC/VDC V00-D J = Cable grip w/indicator light, 0 VAC/VDC V00-D8 = 0 ft. molded cable with indicator light, surge suppression, 4 VAC/VDC V00-D0 6 = 0 ft. molded cable with indicator light, 0V/0 Hz-0V.60Hz V00-D0 NC = Normally Closed NO = Normally Open x/ Air Actuated Valves (Softseal Spool) 0 0 Function x/ Actuation / Function Operating Pres. Pres. (lb.) Spares Kit V4AA-X000 NC Air/Spring 0.6 0-4.7 + (0. x op. pressure) 0.6 V70447-KO 0 0 V4BA-X000 NO Air/Spring 0.6 0-4.7 + (0. x op. pressure) 0.6 V70448-KO 0 0 V4CA-X000 NO/NC Air/Spring 0.6 0-4.7 + (0. x op. pressure) 0.6 V70449-KO / Air Actuated Valves Spool Techn. Operator Return Operating Pres. Pres. (lb.) Repair Kit V407A-X0090 Gl Air Spring 0.8 6 Hg -. - 0.4 V70440-KO V47A-X0090 Ss Air Spring 0.66 6 Hg - 9-0. V7044-KO V40A-X000 Gl Air Air 0.8 6 Hg - 9-0.4 V7044-KO V4A-X000 Ss Air Air 0.66 6 Hg - 9-0.4 V7044-KO V40A-X000 Gl Air (priority) Air 0.8 6 Hg - 9-0.4 V7044-KO Gl = Glandless Spool Ss = Soft Seal VAL-76
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm / Air Actuated Valves Spool Valve Function Operator Return Operating Pres. Pres. (lb.) Spares Kit V406A-X000 Gl APB Air Air 0.6 6 Hg - 9-0.4 V7044-KO V46A-X000 Ss APB Air Air 0.69 6 Hg - 6-0.6 V70444-KO V407A-X000 Gl COE Air Air 0.6 6 Hg - 9-0.4 V7044-KO V47A-X000 Ss COE Air Air 0.69 6 Hg - 6-0.6 V7044-KO V408A-X000 Gl COP Air Air 0.6 6 Hg - 9-0.4 V7044-KO Gl = Glandless Spool Ss = Soft Seal V48A-X000 Ss COP Air Air 0.69 6 Hg - 6-0.6 V70446-KO APB = All Ports Blocked COE = Center Open to Exhaust COP = Center Open to Pressure Bases Single Station Sub-base Ported w/o Ports Modular Sub-base Side Ported w/o Ports Modular Sub-base Side* Ported with Ports Modular Sub-base Side Ported (PIF) w/o Ports Modular Sub-base Side* Ported (PIF) with Ports V7040-PB (/8 NPTF) V704-PF (/8 NPTF) V7046-PF (/8 NPTF) V704-F (ø/4 ) V7046-F (ø/4 ) V7040-AB (G/8) V704-AF (G/8) V7046-AF (G/8) V704-8F (ø8 mm) V7046-8F (ø8 mm) V704-6F (ø6 mm) V7046-6F (ø6 mm) *Use with air pilot valves *Use with air pilot valves End Plate Kit End Ported Double Station Modular Sub-base Side Ported without Ports End Plate Kit with Side Ported Valve Stations without Ports Intermediate Supply/Exhaust Module Single Valve Shut-Off Plate V7044-RC (/4 NPTF) V704-PF (/8 NPTF) V704-PF (/4, /8 NPTF V7049-PO (/8 NPTF) V7040-KO (Port open/closed) V7044-BC (G/4) V704-AF (G/8 ) V704-AF (G/4, G/8) V7049-AO (G/8) Sandwich Plate with additional Pressure Port Single Pressure Regulator Plate Double Pressure Regulator Plate Control Plate Blanking Plate for unused Station V704-P0 (/8 NPTF) V7047-K (Port reg.) V7047-K4 (Ports +4 reg.) V7048-KO (Ports + reg.) V70400-KO V7047-K (Port reg.) V7047-K (Port 4 reg.) DIN EN 0 0 rail ( metre) DIN-rail Mounting Kit Single Blanking Disk to Modular Sub-base Manual Override Set-Up Kit Transition Plate #8 mm #6 mm V0009-C00 (x7.mm) V70-KA0 V704-K0 ( each) (Ports,,) V70-K00 V7046-K00 V09-C0 (xmm) V704-K0 ( each) (Ports +) VAL-77
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm V40*D-C*** and V4*D-C*** s / Single Solenoid Valve Air Spring Return Manual Override V40*6D-C*** and V4*7D-C*** s / Single Solenoid Valve Mechanical (& Air) Spring Return Manual Override V40**D-C*** and V4**D-C*** s / Double Solenoid Valve.76 (9.6) Manual Override.8 (9.9).04 (77.).8 (9.9).04 (77.).8 (9.9).04 (77.) 0.0 ().89 (98.9) M.6 (4.) 0.49 (.) 0.7 (8.6) 0.0 ().89 (98.9) M.6 (4.) 0.49 (.) 0.7 (8.6) 0.0 () M 4. (.).7 (7.6) 0.49 (.) 0.7 (8.6) V40***D-C*** and V4***D-C*** s x/ + / Double Solenoid Valve.76 (9.6) Manual Override V47A-X0090 / Single Air Valve.89 (98.9).6 (4.) V407A-X0090 / Single Air Valve V40*A-X00*0 and V4*A-X00*0 s x/, / + / Double Air Valve.04 (77.).8 (9.9) 0.0 () M 4. (.).7 (7.6) 0.49 (.) 0.7 (8.6).7 (4.8).8 (9.9) 0.0 () M 0.49 (.) 0.7 (8.6).7 (4.8).8 (9.9) 0.0 () 4. (.) M.7 (7.6) 0.49 (.) 0.7 (8.6) Conversion from internal to external pilot supply / Collected pilot exhaust The lowered and captive gasket between valve body and pilot valve defines and indicates pilot air supply as well as pilot exhaust function of the valve. Solenoid pilot actuated valves blue gasket Drawing shows no pilot valve. blue gasket Internal pilot supply, pilot exhaust air collected and exhausted via port. All solenoid pilot valves with code at position 6 in the part number (e.g V4to) have the gasket mounted in this position on delivery. External pilot supply from port only, pilot exhaust air not collected but bleed through valve body. All solenoid pilot valves with code at position 6 in the part number (e.g V4to) have the gasket mounted in this position on delivery. Note: Dismounting pilot valve gives access to gasket. Conversion from internal to external pilot supply (or vice versa) by turning the gasket. Caution: In this case part number and symbol on label shows different function. Therefore check gasket position when mounting valve. Air pilot actuated valves Drawing includes cover plate. / Solenoid pilot actuated valves with air spring return Drawing shows end cap side. INT EXT INT EXT blue gasket Air pilot actuated valves External pilot supply. VAL-78
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Modular Subbases parts for DIN rail or surface mounting Subbase 0.4 (.6) Individual components Modular Subbase Ports +4 on side V704-xF A 0.6 lb (0. kg) Double Station Modular Subbase Ports +4 on side V704-yF 0. lb (0.4 kg) D Modular Subbase Ports +4 on side Ports + on side V7046-xF A 0.6 lb (0. kg) Side ported subbase 0.7 (9.).8 (47).4 (.4) End Plate Kit C 0.46 lb End Ported (0. kg) V7044-BC (G/4) V7044-RC (/4NPTF) End ported end caps left hand and right hand. (8.6).07 (7.) C M 4 4 4 A C Y. () M M.0 (.9).7 (44.4).89 (7.4) 4.74 (0.4) End Plate Kit with Valve Station Ports +4 on side 0.88 lb V704-AF (0.4 kg) (// G/4, /4 G/8) V704-PF (// /4NPTF, /4 /8NPTF) End ported end caps left hand and right hand Accessories DIN EN 00 rail 0.68 lb x 7. mm, m (0. kg) V0009-C00 0.0 (7.7) 0.8 (4.6) 0.4 (.4) 0.9 () 0.4 (.7). (8.).68 (4.7) 0. (.) DIN EN 00 rail. lb x mm, m (.0 kg) V09-C0 Side ported sub-base.4 (4) View Y Right Hand Side M Left Hand Side 0. (.8). (.) 0.0 (7.6) *N = Number of stations Note: Port either used for external pilot air supply or for collected pilot air exhaust. Therefore, never plug port when using valves with internal pilot air supply. Port is not used, plugging not necessary.. (8.6) Ø 0.7 (Ø 4.) 0.0 (7.).6 (6) 0.67 (7) *N x 0.7 (9.) 0.67 (7) DIN rail Mounting Kit V70-KAO Blanking Disk to Modular Subbase Ports,, V704-K0 Blanking Disk to Modular Subbase Ports + V704-K0 x/y = Insert port type from table below Code x Code y Ports +4 D 0.0 lb (0.0 kg) 0.0 lb (0.0 kg) 0.0 lb (0.0 kg) Ports + A A G/8 M P P /8 NPTF M 8 ø 8 mm PIF M 6 ø 6 mm PIF M ø /4 PIF M VAL-79
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Single Station Subbase - Side Ported with Ports 0.4 () 0.0 (7.).97 (0) 0. (9) 0.9 () Port Size A V7040-PB /8NPTF Side Ported with Ports V7040-AB G/8 Side Ported with Ports Note: Ports for both types = 0- UNF 0.8 (0.08).8 (0).8 (8).60 (66) Ø 0.7 (Ø 4.).8 (8) 0.49 (.) 0. (.) xm.04 (6.) Ø 0.7 (Ø 4.) xa x0- UNF 4 0.9 () 0.6 (4) 0.9 ().7 (40) VAL-80
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Intermediate Supply / Exhaust Module 0.7 (8.6) 0.49 (.) 0.8 (0.) M.77 (4) 0.9 () 0. (8) x A. ().0 (6) 0.7 (9.) 0. (.) 0.4 (0.6) Provides additional porting on Modular- or Fixed Length Sub-base. Occupies one valve station. Supplied with gasket for both sub-bases. Can be used to: Port Size A - Improve supply flow - Increase exhaust capacity - Pneumatically separate valves for fail save emergency - Multipressure system and system solutions V7049-PO /8NPTF 0. V7049-AO G/8 (0.0) Single Valve Shut-Off Plate M 0.67 (7) 0.0 () 0.7 (9.) 0.6 (9.) V7040-KO Single Shut-Off Plate supplied with gasket 0. (0.06) Allows individual exchange of valve, while valve manifold is pressurized by port. Note: restricted to maximum.4.88 (7.) 0.98 () 0.49 (.) 0.7 (8.6) Sandwich Control.99 (76) 0.4 (6.) V7048-KO Control supplied with gasket Dual Regulation of Exhaust Ports and 0. (0.06) M.0 (8) 0.49 (.) 0.7 (8.6) 0.6 (.) 0.0 (7.) 0.0 () Exhaust (Ports +) [].4.40..0..0..0.0 0 0 4 6 7 8 9 0 Number of turns from closed : Port and 4: remains unchanged measured at 6 bar inlet, Pressure drop bar VAL-8
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Blanking Plate.0 (6) 0.7 (9) 0.4 (6) 0.9 (0) M4 V70400-KO Blanking Plate for blocking of unused Stations (supplied with gasket) 0.04 (0.0).76 (70) Pressure Regulator Plates (including gauge and adapter tube).0 (0.).9 (.).6 (8.4) 0. (.) V7047-K Regulation of Port Maximum inlet pressure psig (6 bar) Regulated pressure. psig ( 0 bar) 0.46 (0.) M 0.98 () 0.7 (8.6).86 (98).47 (8.9) 0.49 (.) M.0 (0.).9 (.).6 (8.4) 0.98 () 0.7 (8.6) 0. (.) V7047-K Regulation of Port Maximum inlet pressure psig (6 bar) Regulated pressure. psig ( 0 bar) 0.46 (0.).86 (98).47 (8.9) 0.49 (.) 0. (.) 0.7 (8.6).6 (8.4).9 (.).0 (0.) 0.49 (.) 0.98 () M 4.06 (0).66 (.9) V7047-K Regulation of Port 4 Maximum inlet pressure psig (6 bar) Regulated pressure. psig ( 0 bar) 0.46 (0.) VAL-8
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Dual regulator V7047-K4 Regulation of Ports +4 0.79 (0.6).0 (0.).9 (.).6 (8.4) 0. (.) Maximum inlet pressure (6 bar) Regulated pressure psig. psig ( 0 bar).6 (40.9).87 (7) M.94 () 0.7 (8.6) 9.6 (.7) 0.49 (.) Characteristics for Pressure Regulator Plates (bar) PSIG (7.0) 0. Inlet presssure = 6 psig (8 bar) Regulated pressure (6.0) (.0) (4.0) (.0) (.0) (.0) 89.0 7. 8.0 4. 9.. 0 0.8.. 7. 8.8 0.6.4 SCFM (0) (00) (0) (00) (0) (00) (0) (l/min) VAL-8
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Sandwich Plate with additional Pressure Port V704-PO Sandwich Plate with additional Port, supplied with gasket 0.09 (0.04) 0.49 (.) 0. (.).4 (7) M 0.7 (9.) 0.98 () 0.7 (8.6) 0.6 (.) /8 NPTF 0. (8) e Transition Plate #8 mm to #6 mm.4 (90) 0. (.).6 (6).07 (7.).7 () V44/4 0.69 (7.6) 0.4 (0.6) V44/4 V40/4 Description Port // x /4 NPTF V7046-K0O Transition Plate # 8 # 6 mm without Ports // 0.7 (0.) V40/4 V7046-R00 Transition Plate# 8 # 6 mm /4 NPTF 0.68 (0.) 0.88 (.4) V7046-B00 Transition Plate # 8 # 6 mm G/4 0.68 (0.).6 (9.6).90 (7.7) VAL-