Contact Us: T: +27 (0)86 196 1177 E: training@fezamax.co.za FTTA Building C5, Denel North, Atlas Rd, Kempton Park www.buildmax.co.za Training Academy
Fezamax is a wholly owned subsidiary of Buildmax Limited 37.15% black owned Level 4 EME Accreditations: MQA MERSETA TETA HWSETA Driver training management Operator simulator training Social & Labour Plan compliance Compliance & performance training ABET Training Workplace skills plan/annual training reports Assist to maximise rebates from levies paid www.buildmax.co.za
About Fezamax The training academy was established in 2008 by the MCC group of companies. Fezamax, a wholly owned subsidiary of Buildmax Limited, acquired the business in 2017. With a total of 21 dedicated and highly trained staff members, the training centre can accommodate 60 apprentices at any given time. We play a significant role in increasing the opportunities for better employment by equipping your workforce and the local communities in which you operate with trades that are in demand. We maintain a high standard of training and produce highly qualified artisans. We continuously strive to become the technical training academy in South Africa. Courses MQA Accredited Courses 1. Explain basic health and safety in and around the workplace 2. Demonstrate Knowledge and Ability to work in a Surface mine 3. Doze Material using a Rubber Wheel Dozer 4. Use a Track Dozer to move Material 5. Drill Blast holes in a surface excavations operations 6. De-water blast holes using vehicle mounted de-watering pump 7. Drill medium diameter blast holes using an hydraulic or pneumatic drlling rig and compressor 8. Drill small diameter blast holes using a percussion drilling rig and compressor 9. Drill holes for blasting and dimension stone blocks using a mech drill 10. Drill intersecting holes for diamond wire sawing 11. Loading material using a Face Shovel 12. Excavate and load material using hydraulic Excavator 13. Load Material using a Front End Loader 14. Load and offload material using a skidsteer loader 15. Handle dimension stone blocks by means of front end loader 16. Operate Tractor Loader Backhoe 17. Haul and Dump material using a Haul Truck 18. Grade material using a Motor Grader 19. Breaking rock using a hydraulic rock breaker 20. Relocate machines and equipment using a Low Bed 21. Transport material and equipment using a Flat back Truck 22. Suppress dust using a Water Bowser 23. Illuminate an area using a lighting plant 24. Transport personnel, material and equipment using a LDV 25. Transport and distribute fuel using a Fuel Bowser 26. Demonstrate knowledge and use of hand operated Fire Fighting equipment 27. Provide risk-based primary emergency care/first aid in the Workplace Page 2
Merseta Accredited Apprenticeship & Decentralised Trade Test Centre 1. Heavy Equipment Mechanic 2. Auto Electrician 3. Boilermaker 4. Forklift Mechanic 5. Diesel Mechanic TETA/HW Seta Accredited Courses Lift Trucks 1. Operate Counterbalance Lift Trucks 2. Operate Advanced Defined Purpose lift trucks 3. Reach Truck up to rated cap of 2500 kg 4. Order Picker For all Racking level including high rise 5. VNA Lift Trucks Non elevating cab service all levels 6. VNA Lift Trucks elevated cab to service all levels 7. Rail mounted stacker lift truck non-elevating cab 8. Rail mounted stacker lift truck elevating cab 9. Operate Advanced Purpose lift trucks 10. Pedestrian Controlled Lift truck above rated Cap of 2000 kg 11. Pallet Lift Truck electric/battery-powered and hydraulic hoist 12. Operate a side loader lift truck 13. Side Loader Lift Truck cap as specified on certificate 14. Rough Terrain Lift Truck Page 3
TETA/HW Seta Accredited Courses (continued) Cranes 1. Operate overhead/gantry cranes 2. Overhead Crane Pendant/Radio Controlled 3. Overhead Crane Cabin Controlled 4. Operate truck-mounted cranes 5. Operate a mobile crane 6. Lattice Boom Mobile Crawler Crane up to 50 000kg Cap 7. Hydraulic Mobile Crane Above 50 000kg 8. Hydraulic Crane Pick Up and Carry Above 50 000kg 9. Lattice Boom Mobile Truck Crane Above 50 000kg cap as stated on certifcate 10. Lattice Boom Mobile Crawler Crane Above 50 000kg cap as stated on certificate 11. Tower Crane Top Slewing 12. Tower Crane Bottom Slewing 13. Telescopic Handler 14. Mobile Elevating Work Platform 15. Hoist and Winches 16. Sling Loads Driver Training / Management (TETA Accredited) By Road 1. Operate a Rigid Light Motor Vehicle 2. Operate a Rigid Vehicle 3. Operate a Combination Vehicle 4. Anti-Hijacking 5. Cargo Securement 6. Defensive Driving 7. 4 X 4 Off-Road Training 8. Convey dangerous goods by road 9. Demonstrate knowledge and understanding HIV/AIDS in a workplace, and its effect on a business 10. Load General Freight 11. Truck Driver Training (QCTO) Page 4
Short Skills Programs 1. Emergency Responder (HW/SP/1510181) 2. Fire Safety (HW/SP/1601042) 3. Basic Risk Assessor (HW/SP/150157) 4. Risk Assessment First Aid and Fire Fighting in the Workplace 5. SHE Introduction (HW/SP/1510144) 6. Implement OHS Programme and Functioning as a safety Representative 7. Basic SHE Representative (HW/SP/1510148) 8. Workplace SHE Representative (HW/SP/1510182) 9. Basic Health and Safety & Fire Fighting (HW/SP/1510182) 10. General Safety for Managers (HW/SP/1510146) 11. First Aid Basic (HW/SP/150795) Compactors/Construction Further Education & Training Certificate: Supervision of construction processes 1. Erect, use and dismantle access scaffold 2. Inspect access scaffold General Education & Training Certificate: Construction 1. Use and Maintain Hand Tools on a Construction Site 2. Use and Maintain Power Hand Tools on a Construction Site 3. Use and Maintain Small Plant and Equipment on a Construction Site 4. Pneumatic Road Roller 5. Smooth Wheeled Roller 6. Vibratory Roller 7. Drawn Type Grid/Vibrator/Trench Compactor 8. Pan Compactor 9. Ejector Hauler 10. Re Claimer (Roto Mixer) 11. Concrete Dumper 12. Truck Mounted Concrete Dumper 13. Mill Relining Machine 14. Operate a Diesel Bowser 15. Barricading, Signage and Traffic Control 16. Conveyor Belt (Belts men) 17. Lead and Supervise Construction Team Page 5
Short Courses 1. First Aid Level 1, 2 and 3 (Dept of Labour certificate) 2. Handling & Storage of Hazardous Chemical Substances 3. Safety with Welding 4. Bulk Bag Safety & Inspection 5. Safety with Compressed Air 6. Ladders Safety & Inspection 7. Safe Stacking and Storing 8. Safety with industrial gas 9. Log out and Tag out procedures 10. ICAM (Incident course analysis method) Other Services 1. Entry Level Assessments 2. Trade Test Readiness 3. Trade Test Preparation 4. Trade Testing 5. Pre-recuitment testing Page 6
Contact Us: T: +27 (0)86 196 1177 E: training@fezamax.co.za FTTA Building C5, Denel North, Atlas Rd, Kempton Park www.buildmax.co.za