Moby000 For swing gates For swing gates with leaves up to m. Electromechanical gear motor irreversible, 2 Vdc, with magnetic encoder, mechanical stop in opening, surface mounted (MB02). Reliability and noiseless operation: fewer components and patented layout of the internal components. Easy installation and maintenance with the waterproof, quick connector and incorporated condenser. Quick, easy adjustment of the limit switches. Bronze volute to guarantee safe closing. Recommended control units: Mindy A2/ 2 Vdc version with magnetic encoder, perfect for intensive use easy programming by pressing a single button clutch with anti-crush safety feature automatic memorization of limit switches in opening and closing with self-learning function pause time programming; partial opening; slowdown during opening and closing the system will operate during a blackout by means of rechargeable batteries Aluminium Nice release: user-friendly, effortless, sturdy Exclusive, patented layout of the internal components Aluminium body with polyester painting 00 00 00 00 00 300 2 2, 3 3,, The shape, the height of the gate and the weather conditionscan considerably reduce the values shown in the graph to the side. MB02 Flashing light Power Current absorbed Power absorbed Protection level Speed Travel Max thrust Working temp. (Vdc) (line) (A) (W) (IP) (m/s) (mm) (N) ( C Min/Max) 2 20 0.0 0 0-20 +0 Digital or key switches Control unit Photocells Moby000 Approximate draft Work cycle (%) 0 Dimensions Weight (mm) (kg) 3xx Photocells mounted on posts Transmitter NICE
Toona Easy access to internal parts in upper section of motor For swing gates with leaves up to m. Electromechanical gear motor, surface mounted. Also available in 2 Vdc version, with magnetic encoder. Ideal for residential and industrial use. Release handle in die-cast aluminium, practical and resistant Exclusive patented layout of internal parts Code TO02 TO02I TO0 TO0 TO0 Electrical data Power supply (Vac 0 Hz) - 230 Power supply (Vdc) 2 - Absorption (A)..3 Power (W) 20 30 300 Built-in capacitor (μf) - Speed (m/s) 0.0 0.03* 0.0 Force (N) 00 2 00 Work cycle (cycles/hour) * ** 0 Dimensional and general data Protection level (IP) Working temp. ( C Min/Max) Dimensions (mm) Weight (kg) -20 +0 xx h * With optimal installation. ** The reduction in number of manoeuvres with respect to the version TO02 depends solely on the lower manoeuvre speed. New third generation models: quality and durability thanks to the housing, made up of two tough aluminium shells with polyester paint fi nish; more resistant to atmospheric agents. Internal moving parts completely in steel, light alloys and technopolymers. Reliable and silent: patented layout or internal parts. Lead nut in bronze for strength and silent operation. Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor. Simple installation and maintenance, with built-in capacitor. Total interchangeability with the series Moby: identical positions and fi xing brackets. TO02I ideal for intensive work load, thanks to the torque of 2 Nm, can work on continuous duty on large sized gates. Recommended control units: Mindy A3, A3F, A, AF, A0, A00F; for TO02 and TO02I Moonclever MC2H. 2 Vdc version with magnetic encoder. Perfect for intensive use, compatible with the control unit Moonclever MC2H, equipped with BlueBUS, and provision for operation with the systems Solemyo and Opera: simple programming, by means of a single key; self-learning of opening and closing limit positions; automatic fault diagnostics; programming of pause time; pedestrian pass door; deceleration on opening and closing; obstacle detection with dual technology; operation in event of power failure by means of optional rechargeable batteries (PS32); provision for connection of latest generation resistive sensitive edges. Approximate draft. 2 3. Toona 2. Transmitter 3. Photocells mounted on posts. Photocells. Flashing light. Control unit. Digital or key switches. SYP* solar panel. PSY2* battery box. O-View* multifunction display. *Optional connection to Solemyo and Opera systems. 00 0 00 0 00 30 300 20 TO02I 2 2, 3 3,, The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph to the side. Use in windy areas 230 Vac models.
Toona Easy access to internal parts in upper section of motor For swing gates with leaves up to m. Electromechanical gear motor, surface mounted, powered at 2 Vdc, with magnetic encoder. Ideal for industrial installations, designed for intensive use. Code Electrical data Power supply (Vac 0 Hz) Power supply (Vdc) Absorption (A) Power (W) Built-in capacitor (μf) Speed (m/s) Force (N) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. ( C Min/Max) Dimensions (mm) Weight (kg) Release handle in die-cast aluminium, practical and resistant Exclusive patented layout of internal parts TO02-2 20-0.03-20 +0 x2x h Tougher housing shell, made up of two sturdy shells Compatible for operation with Solemyo and Opera systems. New third generation models: quality and durability thanks to the housing, made up of two tough aluminium shells with polyester paint fi nish; more resistant to atmospheric agents. Internal moving parts completely in steel, light alloys and technopolymers. Reliable and silent: patented layout or internal parts. Lead nut in bronze for strength and silent operation. Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor. Control unit Moonclever MC2H, with BlueBUS technology: simple programming, by means of a single key; self-learning of opening and closing limit positions; automatic fault diagnostics; programming of pause time; pedestrian pass door; deceleration on opening and closing; obstacle detection with dual technology; operation in event of power failure by means of optional rechargeable batteries (PS32); provision for connection of latest generation resistive sensitive edges. 0 0 300 2 3 0 00 00 3. Toona 2. Transmitter 3. Photocells mounted on posts. Photocells. Flashing light. Control unit. Digital or key switches. SYP* solar panel. PSY2* battery box. O-View* multifunction display. *Optional connection to Solemyo and Opera systems. The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph to the side.
Hyppo 000 Die-cast, aluminium, key-operated unlock system, complete with protected key. Designed to accommodate external release, too For swing gates with leaves up to 3 m, also with large pillars. Electromechanical gear motor, surface mounted, also in 2 Vdc version with magnetic encoder, with articulated arm. Code Electrical data Power supply (Vac 0 Hz) Power supply (Vdc) Absorption (A) Power (W) Built-in capacitor (μf) Speed (Rpm) Torque (Nm) Work cycle (%) Dimensional and general data Protection level (IP) Working temp. ( C Min/Max) Dimensions (mm) Weight (kg) HY02 Sturdy, anti-shearing arm, galvanised and painted; strengthened in those areas subjected to greater mechanical stress HY00-230 2 -.2 20 20-2. 20 00 0 30 3-20 +0 30xx22 h 3 Single model for right and left leaves. Two irreversible versions, with 230 Vac (HY00) and 2 Vdc (HY02) power supplies with magnetic encoder. Fewer connections mean quicker installation. Pre-wired, incorporated double limit-switch both during opening and closing (HY00). Easy to install: nothing welded to the gates. Long-lasting: solid metal mechanics. Compact: shockproof bodywork with no sharp corners. Recommended control units: Mindy A3, A3F, A, AF, A0, A00F; for HY02 Moonclever MC2H. 2 Vdc version with magnetic encoder. Perfect for intensive use, compatible with the control unit Moonclever MC2H, equipped with BlueBUS, and provision for operation with the systems Solemyo and Opera: simple programming, by means of a single key; self-learning of opening and closing limit positions; automatic fault diagnostics; programming of pause time; pedestrian pass door; deceleration on opening and closing; obstacle detection with dual technology; operation in event of power failure by means of optional rechargeable batteries (PS32); provision for connection of latest generation resistive sensitive edges. 00 B A D 00 00 00 00 300 HY00 HY00 / HY02 2 2, 3 2 3. Hyppo 2. Transmitter 3. Photocells mounted on posts. Photocells. Flashing light. Control unit. Digital or key switches. SYP* solar panel. PSY2* battery box. O-View* multifunction display. *Optional connection to Solemyo and Opera systems. Standard HYA2 A max 00 B max 30 0 D max 0 00 N.B. The above values are valid if the motor is used with standard accessories. The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph to the side. Use in windy areas 230 Vac models. 20
Pop Incorporated control unit For swing gates with leaves max. 2 m, and those versions with large pillars and lightweight structures, ideal for one leaf pedestrian gates. Electromechanical gear motor irreversible 2 Vdc with articulated arm, surface mounted. Code Electrical data Power supply (Vac 0 Hz) Power supply (Vdc) Absorption (A) Power (W) Built-in capacitor (μf) Speed (Rpm) Torque (Nm) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. ( C Min/Max) Dimensions (mm) Weight (kg) * Version without control unit. PP02 Compact body with aluminium base Sturdy, anti-shearing arm PP22* 230 - - 2 3 -. 0 0-20 +0 x2x3 h Compatible for operation with Solemyo system. Two irreversible 2 Vdc versions complete with limit switch on opening either without control unit (PP22) or with incorporated control unit (PP02). User-friendly: release with personalised Nice key designed for cord-type release. Sophisticated electronics: slowdown, obstacle detection system, can be linked to the.2 KOhm resistive sensitive edge. Easy to install: no welding. Compact: mm in width, ideal for any kind of post. Always ready for use: continues to work even during power failures using optional (PS2) batteries that fi t inside the motor. Powerful: thanks to the 0 Nm torque. Small shockproof body with aluminium base. Perfect for intensive use: easy programming by pressing a single button; clutch with anti-crush safety feature; automatic memorization of limit switches on opening and closing with self-learning function; programming of pause time; pedestrian pass door; deceleration on opening and closing. 20 2 3 Max. 20 mm Max. Min. 00 mm (0 ), 2. Pop 2. Transmitter 3. Photocells mounted on posts. Photocells. Flashing light. Digital or key switches. SYP* solar panel. PSY2* battery box. *Optional connection to Solemyo system. The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph to the side.
Wingo02Kit - 02Kit For swing gates with leaves up to 2 m (Wingo02Kit) and up to 3, m (Wingo02Kit), mounted externally. 2 Vdc electromechanical gearmotor. Versions designed with provision for solar power system Solemyo, thus enabling installation also in distant locations, far from electrical mains, with no need for connections or excavation work, in total harmony with the environment. WG02 WG02 Exclusive, patented layout of the internal components User-friendly release with personalised Nice key or standard lock (optional) Gear motor characteristics: reliable and silent: thanks to the patented layout of the internal components and less moving parts; easy to install: after the gear motor has been assembled, all electrical connections are made from above; user-friendly release with personalised Nice key or standard lock (optional); travel stops PLA3 in opening. New Moonclever control unit (MC2): a single button; in opening and closing with self-learning function; slowdown during opening and closing. Sophisticated electronics: slowdown, obstacle detection system, can be linked to the,2 KOhm resistive sensitive edge. No blackout: continues to work even during power failures using optional (PS2) batteries that fit inside the control unit. The kit contains: FLO2R-S MC2 MOF MOSE ML2 PLA3 TS WG02 2 surface-mounted electromechanical gear motors, with Nice key release (Wingo02Kit). WG02 2 surface-mounted electromechanical gear motors, with Nice key release (Wingo02Kit). Common accessories in the 2 kits: FLO2R-S transmitter 33.2 MHz, 2 channels. MC2 control unit with plug-in receiver SMXI. MOF pair of photocells for outdoor installation. MOSE key selector switch for outdoor installation. ML2 flashing light. PLA3 2 travel stops for opening manoeuvres. TS signboard. N.B. The content of the package may vary: consult the retailer.
Code Description Pz/pallet WINGO02KCE Kit for swing gates with leaves up to 2 m, surface mounted 2 WINGO02KCE Kit for swing gates with leaves up to 3, m, surface mounted 2 Motor code WG02 WG02 Electrical specifications Power (Vdc) 2 Current absorbed (line) (A) 3, Power absorbed (W) Built-in capacitor (μf) - Speed (m/s) 0,0 0,0 Torque (N) 0 Work cycle (cycle/hour) 30 Dimensions and general data Working temp. (C ) -20 +0 Protection level (IP) Dimensions (mm) xx0 xx20 Weight (kg) For updated and complete information, consult the product technical manual. Technical layout drawing and application limits WG02 00 0 mm 320 20, 2 WG02 00 20 mm 0 300 2 3 3, 2 3. Wingo 2. Transmitter 3. Photocells mounted on posts. Photocells. Flashing light. Moonclever control unit. Digital or key switches. SYP* solar panel. PSY2* battery box *Optional connection to Solemyo
MhouseKit WG20 The powerful solution featuring a simple and linear design for swing gates Kit for the automation of a residential two-leaf gate, each leaf measuring up to m in width and weighing up to 00kg for leaf Easy installation with the Mhouse ECSBus system: only two wires are required for polarity free connection of the main system components. The colour-coded terminals, each of which identifies a set, enable quick, error-proof connections. The aerial is integrated in the flashing light for greater protection. No welding is required for system installation Adjustable multi-position mounting brackets Noiseless and reliable: body made of painted die-cast aluminium; mechanical parts made of metal Convenience: operation during power failures guaranteed by the PR buffer batteries (optional) which are housed inside the control unit, and which can be connected using a convenient plug-in connector. Mhouse key-operated release device enables you to open and close the gate manually. Opening and closing mechanical stops Maximum safety ensured by the low voltage connections and the automatic obstacle detection feature External modular control unit: electronic board with integrated receiver and removable box to facilitate maintenance; transformer; compartment for PR buffer batteries (optional) Control unit function selection: 2 speeds: slow for heavy gates, slow or fast for lighter gates Automatic timed closing of the gate after each opening manoeuvre, or closing manoeuvre commanded only by the transmitter or key-operated selector switch. New transmitters can also be fitted (those included in the kit are pre-memorized) Transmitter function selection: Partial opening of gate, to restrict passage to pedestrians and bicycles Adjustment of pause time before the automatic closing starts Adjustment of sensitivity to obstacles detected along the path of the gate before the movement is reversed Mhouse Via Pezza Alta 3 3 Oderzo TV Italia Tel. +3 022 202 Fax +3 022 3 info@mhouse.biz www.mhouse.biz
Installation Connections The gauges of the required power cables are specified on the technical literature (the length varies according to the installation layout) Operating limits Max weight of leaf (kg) 00 Max length of leaf (m) Max leaf opening angle 30 Max no. of manoeuvres/day 0* Operating temperature ( C) -20 +0 *opening + closing Each Kit WG20 contains: 2 WG Electromechanical worm gear motor with three Mhouse release keys and adjustable mounting brackets included. 0 0 max. 230mm min. 20mm max. 00Kg 2 TX 33.2MHz buttons variable code transmitters FL Adjustable flashing light with incorporated aerial Accessories: PT0 Two posts of mm high complete with a pair of premounted photocells PT0 Two posts of mm high complete with two pairs of premounted photocells Mount the brackets on the gate, observing the dimensions shown in the instructions 2 Secure the motors to the gate 3 Install and connect all the system elements Connect the wires with the terminals to the control unit and start the automatic programming function The system is ready to receive your commands! PH Pair of wall-mounted autosynchronized photocells CL2 External control unit for control of two WG series electromechanical gear motors with integrated 33.2MHz variable code receiver. KS Two-position (open/stop) key-operated selector switch with pair of metal keys PR 2V buffer battery for emergency power supply MHDEP30-GB/00/2-0 Concept : Blu, Oderzo, TV Photos : Studio Gabriotti - Blu Printed by : AGCM, PN Design : Roberto Gherlenda