Introduction. VEcase 700 The system case with individual expansion options. EMC shielding. Mechanical resistance. Directional air flow

VECase 700

Introduction VEcase 700 The system case with individual expansion options Features Metal case with rack function The platform for building micro computers A case system to the latest international standards A case system with individual expansion options For compact PCI structures Optimal heat extraction system by directed air flow VEcase 4U/42HP and 5U/60HP EMC shielding Typical EMC Shielding Performance in db The cases are based on a design which begins by providing the most efficient possible shielding without using additional components. This means that all the components are conductively interconnected. And if your EMC requirement is more stringent, there are cases with integral finger strips to provide full contact. Attenuation (db) Standard EMC Frequency - (MHz) Mechanical resistance Shock proof (test) according to IEC 60068-2-6 Test Fc Table C2 VEcase cases are designed to provide the functions both of a rack and a 19 modular enclosure. This raises the question of their use in environments where shock and vibration can occur Due to their one-piece aluminium section construction for the side walls, VEcase cases are particularly stable. The test certificate shown here shows how they react to a shock and vibration test. Classical Pulse Time (ms) Directional air flow Thermal test with 3 fans 95CFM Because some electronic components have very high heat loss, it is necessary to provide the best possible air flow for mechanical systems in order to ensure that heat is reduced. Depending on the application and on preference this can be self-convection or fan-assisted convection. This also applies to the cross-ventilation types which, to a degree, work with air flow plates. Temperature in C Load resistance Environmental temperature Measuring points 2

Index VEcase 700 - The system case with its own logic. VEcase 5U/84HP and 4U/84HP 2U CASE Page VEcase 700 variable depth case optional vertical PCB mounting 6-7 3U CASE VEcase 700 variable depth case optional vertical Eurocards mounting 8-9 2U CASE 3U CASE 4U CASE VEcase 700 variable depth case. Optional vertical PCB mounting 10-11 4U CASE VEcase 700 for vertical PCB mounting ½U 3U - ½U and rear plug in technology 12-13 VEcase 700 for vertical PCB mounting 3U / 1U and rear plug in technology 14-15 VEcase 700 for horizontal PCB mounting 3U + 6U (height), 28 HP (depth) and rear plug in technology 16-17 5U CASE VEcase 700 for vertical PCB mounting ½U 3U - 1½U and rear plug in technology 18-19 5U CASE VEcase 700 for horizontal PCB mounting 3U + 6U (height), 36HP (depth) and rear plug in technology 20-21 3

VEcase : Overview of the range With its system components the VEcase 700 case series offers hitherto unknown versatility in modular caseframes. The concept The cases are constructed completely in metal and thus form an extremely stable platform for the widest possibly variety of electronic plug-in modules. Using the modular concept, the cases can be used for test and measurement instruments, as well as for high-performance micro-computers such as VME 64x and CompactPCI. VECASE: OVERVIEW OF TYPES: HEIGHTS, WIDTHS, DEPTHS AVAILABLE Cases for vertical Cases for horizontal Cases for rear plug-in PCB mounting PCB mounting horizontal and vertical 420 420 PCB mounting 340 340 280 280 Height Width Depth 240 (1) case depth 280mm 42HP 2U 60HP 84HP 42HP 3U 60HP 84HP VEcase 4U/84HP with carry handle 42HP 4U/84HP for 160 and 80 mm plug-in modules 4U 60HP 84HP 42HP 5U/84HP for 160 and 80 mm plug-in modules 4 5U 60HP 84HP Note(1): 240mm depth VEcase cases contain one-part aluminium top and base sections.

VEcase 700 The VEcase 700 case series is designed to accept plug-in units and cassettes either horizontally or vertically. The horizontal design provides space for 6U modules in cases 4 and 5U high. The useful aperture width, depending on the height of the case, is either 28 or 36HP. Ventilation is through lateral vents. For high outputs, forced ventilation is recommended by means of fans mounted on the rear panel. Front section with logic VEcase 5U/84HP Front rails with IEC 60297-3 short lip, or long front lip to meet IEEE 1101.10 requirements. Rails are provided with a positioning print, and accept tapped strips, pre-location strips, Guides, EMC contact strips and coding blocks. Feet with logic Two heights of foot can be attached. Available for use in 19 racks. With a hollowed-out recess to allow individual logos to be applied. An integral anti-slip device ensures that the case stands securely. Contact with logic EMC shielding without compromise. Base and top sections contact with the side section along the entire length with a conductive seal. High basic shielding of connectors based on labyrinth design. Front and rear panels in accordance with IEEE 1101.10 geometry. Corner points with logic A central node point is formed by the corner connector. Three different front connectors can be inserted. They can be used as front panel, front panel with handle, or front panel with handle and 19 rack mounting angle. They are screwed to the side panel and the extrusion with a single screw fastening Front section with Logic Contact with Logic Feet with Logic Corner points with Logic Heat extraction with Logic VEcase case enclosures with directional air flow Vertical ventilation by self-convection Ventilation in rectangular direction/fan Ventilation in Z-form direction/fan Ventilation in rectangular direction/fan. 5

VEcase 700 2U Case VEcase 700 cases are supplied assembled as a basic case in 3 depths and 3 widths. Choice of designs as follows: Desk-top case with standard front panels, Desk-top case with handles, Case for desk-top and 19 use with handles and feet, Case with handles and 19 rack mounting angles, without feet and side cover strips. Rear extrusions for mounting mother boards/plug connector extrusions should be ordered separately. Item/Qty/Description Material/Finish 2 side pieces aluminium section/paint RAL 7035 4 front connectors (depending aluminium section/paint RAL 7016 on case design in 3 versions) 1 top cover, complete with 0.5 thick sheet steel, powder coated extrusions RAL7035 aluminium section/powder coated RAL7016 1 cover on base, complete with 0.5 thick sheet steel, powder coated extrusions RAL7035 aluminium section/powder coated RAL 7016 4 M2.5 tapped strips Steel / zinc coated and yellow chromate 4 side strips in 2 colours (only ABS polycarbonate / UL 94 VO for desk-top design) RAL7035 and RAL7016. 4 feet (desk-top design only) ABS polycarbonate/ul 94 VO RAL7016 1 EMC shielding material kit EMC silicon round cord with (already fitted in cases conductive outer skin (Ag/Cu);UL94 with high EMC shielding) VO EMC sealing strips, silver-coated; contact springs, stainless steel. 1 fixing kit. (case mounting screws in Torx design) Order separately: 1 set of extrusions for mounting Aluminium section/colourless connectors/mother board chrome Tapped strips: steel, zinc-coated and yellow chromate VEcase 2U 6 2U CASE VENTILATION FROM BELOW Depth 280mm Depth 340mm Depth 420mm Front extrusions Width EMC shielding EMC shielding EMC shielding With short front lip IEC60297-3 in HP standard high standard high standard high Desk-top design 42 864-11305A 864-11317B - - - - with standard 60 864-11307F 864-11319G 864-11311J 864-11323K - - front panel 84 864-11309L 864-11321E 864-11313C 864-11325D 864-11315H 864-11327J Desk-top design 42 864-11365K 864-11377L - - - - with handles 60 864-11367D 864-11379E 864-11371G 864-11383H - - 84 864-11369J 864-11381C 864-11373A 864-11385B 864-11375F 864-11387G Desk-top design & 19 rack 84 864-11329C 864-11341H 864-11331A 864-11343B 864-11333F 864-11345G 19 rack mounting 84 864-11353J 864-11359B 864-11355C 864-11361L 864-11357H 864-11363E Note: front connectors with 19 fixing flange include handles.

VEcase 700 2U Case VEcase 700 cases have a high EMC shield rating as standard due to their all metal design and the way all parts are electrically continuous. If you have a particularly stringent EMC shielding requirement, all versions can be supplied with EMC seals fitted. Depending on requirements heat can be extracted vertically through vents in the upper and lower covers, or can be rectangular through vents in the lower cover and rear wall. 2U PCBs (55.5 mm) can be inserted vertically. Additional rear extrusions and Guides should be ordered for the purpose. Dimensions table for 2U case Dimension Width42HP 60HP 84HP A 269.24 360.68 482.6 C 233.36 324.8 446.72 D 213.76 305.2 427.12 B = nominal depth of case 1.62mm Dimensions Order Separately 23 25 29 28 Front and rear panels Extrusion for mounting motherboard Guides, ESD clips, coding Swing handle, lateral shelltype handle 2U CASE VENTILATION TOP AND BOTTOM Front extrusions Depth 280mm Depth 340mm Depth 460mm With short front lip Width EMC shielding EMC shielding EMC shielding (IEC 60297.3) in HP standard high standard high standard high Desk-top design 42 864-011221K 864-011233L - - - - with standard 60 864-011223D 864-011235E 864-011227C 864-011239D - - front panel 84 864-011225J 864-011237K 864-011229H 864-011241B 864-011231F 864-011243G Desk-top design 42 864-011297H 864-011301B - - - - with handles 60 864-011299B 864-011303G 864-011283B 864-011291D - - 84 864-011281H 864-011289F 864-011285G 864-011293J 864-011287A 864-011295C Desk-top design & 19 rack84 864-011245A 864-011257B 864-011247F 864-011259G 864-011249L 864-011261E 19 rack mounting 84 864-011269C 864-011275L 864-011271A 864-011277E 864-011273F 864-011279K Note: front connectors with 19 fixing flange include handles 7

VEcase 700 3U Case VEcase 700 cases are supplied assembled as a basic case in 3 depths and 3 widths. Choice of designs as follows: Desk-top case with front panels,desk-top case with handles, Desk-top and 19 cases with handles and feet, Case with handles and 19 mounting flange, without feet and side cover strips. Front extrusions with extended(ieee) or short(iec) front lip. Rear extrusions to fix motherboards/connector extrusions should be ordered separately. Content of kit Item/Qty/Description Material/Finish 2 side pieces aluminium section/painted RAL7035 4 front connectors (according aluminium section/painted RAL7016 to case design in 3 versions) 1 Top cover, complete with 0.5 thick sheet steel, powder coated extrusions RAL7035; aluminium section/ powder coated RAL7016 1 bottom cover, complete with 0.5 thick sheet steel, powder coated extrusions RAL7035; Aluminium section/ powder coated RAL 7016 4 M2.5 tapped strips Steel / zinc coated and yellow chromate 4 side strips in 2 colours (only ABS polycarbonate / UL 94 VO for desk-top design) RAL7035 or RAL7016. 4 feet (desk-top design only) ABS polycarbonate/ul 94 VO RAL 7016 1 EMC shielding material kit EMC silicon round cord with (already fitted in cases conductive outer skin (Ag/Cu); UL with high EMC shielding) 94 VO EMC sealing strips, silvercoated; contact springs, stainless steel. 1 fixing kit. (case mounting screws in Torx design) Torx slot size TX15 Order separately: 1 set of extrusions for mounting Aluminium section/ colourless chrome plug connectors/mother board Tapped strips: steel, zinc-coated and yellow chromate VEcase 3U 8 3U CASE VENTILATION FROM BELOW Depth 280mm Depth 340mm Depth 420mm Front extrusions Width EMC shielding EMC shielding EMC shielding With short front lip (IEC60297.3) inhp standard high standard high standard high Desk-top design 42 864-10639A 864-10651F - - - - with standard 60 864-10641K 864-10653L 864-10645J 864-10657K - - front panel 84 864-10643D 864-10655E 864-10647C 864-10659D 864-10649H 864-10661B Desk-top design 42 864-10699K 864-10711F - - - - with handles 60 864-10701K 864-10713K 864-10705J 864-10717K - - 84 864-10703D 864-10715E 864-10707C 864-10719D 864-10709H 864-10721B Desk-top design & 19 rack 84 864-10663G 864-10675H 864-10665A 864-10667B 864-10667F 864-10679G 19 rack mounting 84 864-10687J 864-10693F 864-10689C 864-10695L 864-10691A 864-10697E Front extrusions with extended IEEE front lip Desk-top design 42 864-10638D 864-10630J - - - - with standard 60 864-10640B 864-10652C 864-10644A 864-10656B - - front panel 84 864-10642G 864-10654H 864-10646F 864-10658G 864-10648L 864-10660E Desk-top design 42 864-10698B 864-10710J - - - - with handles 60 864-10700B 864-10712C 864-10704A 864-10716B - - 84 864-10702G 864-10714H 864-10706F 864-10718G 864-10708L 864-10720E Desk-top design & 19 rack 84 864-10662K 864-10674L 864-10664D 864-10676E 864-10666J 864-10678K 19 rack mounting 84 864-10686A 864-10692J 864-10688F 864-10694C 864-10690D 864-10696H Note: front connectors with 19 fixing flange include handles.

VEcase 700 3U Case VEcase 700 cases have a high EMC shield rating as standard due to their all metal design and the fact that all parts are electrically continuous. For particularly stringent EMC shielding requirements all versions can be supplied with EMC seals fitted. Depending on requirements heat extraction can be vertically through vents in the upper and lower covers, or rectangular through vents in the lower cover and rear wall. 3U high PCBs can be inserted vertically. Additional rear extrusions and Guides should be ordered for the purpose. Dimensions table for 3U case Dimension Width42HP 60HP 84HP A 269.24 360.68 482.6 C 233.36 324.8 446.72 D 213.76 305.2 427.12 B = nominal depth of case 1.62mm Order Separately 23 25 29 28 Front and rear panels Extrusions for mounting motherboard Guides, ESD clips, coding Swing handle, lateral shelltype handle 3U CASES VENTILATION TOP AND BOTTOM Front extrusions Width Depth 280mm Depth 340mm Depth 420mm With short front lip (IEC 60297.3) inhp standard EMC high EMC standard EMC high EMC standard EMC high EMC Desk-top design 42 864-10555K 864-10567L - - - - with standard 60 864-10557D 864-10569E 864-10561G 864-10573H - - front panel 84 864-10559J 864-10571C 864-10563A 864-10575B 864-10565F 864-10577G Desk-top design 42 864-10615K 864-10627L - - - - with handles 60 864-10617D 864-10629E 864-10621G 864-10633H - - 84 864-10619J 864-10631C 864-10623A 864-10635B 864-10625F 864-10637G Desk-top design & 19 rack 84 864-10579A 864-10595E 864-10581K 864-10597K 864-10583D 864-10599D 19 rack mounting 84 864-10607H 864-10613E 864-10609B 864-11482F 864-10611L 864-11484L Front extrusions with extended IEEE front lip Desk-top design 42 864-10554B 864-10566C - - - - with standard 60 864-10556G 864-10568H 864-10560K 864-10572L - - front panel 84 864-10558A 864-10570F 864-10562D 864-10574E 864-10564J 864-10576K Desk-top design 42 864-10614B 864-10626C - - - - with handles 60 864-10616G 864-10628H 864-10620K 864-10632L - - 84 864-10618A 864-10630F 864-10622D 864-10634E 864-10624J 864-10636K Desk-top design & 19 rack 84 864-10578D 864-10594A 864-10580B 864-10596B 864-10582G 864-10598G 19 rack mounting 84 864-10606L 864-10612H 864-10608E 864-11481J 864-10610C 864-11483G Note: front connectors with 19 fixing flange include handles 9

VEcase 700 4U Case VEcase 700 cases have a high EMC shield rating as standard due to their all metal design and the fact that all parts are electrically continuous. For particularly stringent EMC shielding requirements all versions can be supplied with EMC seals fitted. Dimensions Depending on requirements heat extraction can be vertical through vents in the upper and lower covers, or rectangular through vents in the lower cover and rear wall. 4U high PCBs (144.5 mm) can be inserted vertically. Additional rear extrusions and Guides should be ordered for the purpose. Dimensions table for 4U case Dimension Width42HP 60HP 84HP A 269.24 360.68 482.6 C 233.36 324.8 446.72 D 213.76 305.2 427.12 B = nominal depth of case 1.62mm Order Separately 23 4U CASES VENTILATION TOP AND BOTTOM 25 29 28 Front and rear panels Extrusions for mounting motherboard Guides, ESD clips, coding Swing handle, lateral shelltype handle Depth 280mm Depth 340mm Depth 420mm Front extrusions Width EMC shielding EMC shielding EMC shielding With short front lip (IEC 60297.3) inhp standard high standard high standard high Desk-top design 42 864-11038F 864-11050L - - - - with standard 60 864-11040D 864-11052E 864-11044C 864-11056D - - front panel 84 864-11042J 864-11054K 864-11046H 864-11058J 864-11048B 864-11060G Desk-top design 42 864-11099A 864-11111H - - - - with handles 60 864-11101A 864-11113B 864-11105L 864-11117A - - 84 864-11103F 864-11115G 864-11107E 864-11119F 864-11109K 864-11121D Desk-top design & 19 rack 84 864-11062A 864-11074B 864-11064F 864-11076G 864-11066L 864-11078A 19 rack mounting 84 864-11086C 864-11093H 864-11089E 864-11095B 864-11091C 864-11097G Note: front connectors with 19 fixing flange include handles 11

VEcase 700 4U Case VEcase 700 cases are supplied assembled as a basic case in 3 depths and 3 widths. Choice of designs as follows: Desk-top case with front panels, Desk-top case with handles, Desk-top and 19 cases with handles and feet, Case with handles and 19 mounting flange, without feet and side cover strips. Front extrusions short (IEC) or long (IEEE) front lip Rear extrusions to fix motherboards/connector extrusions should be ordered separately. The extrusions are either supplied as a kit or assembled in the case. Case for rear-plug in for 160 mm depth at front /80 mm at rear (supplied complete) Item/Qty/Description Material/Finish 2 x 4U side pieces aluminium section/painted RAL7035 4 front connectors (according aluminium section/painted RAL7016 to case design in 3 versions) 1 top cover, complete 0.5 thick sheet steel,(rear plug with extrusions version 1 thick)powder coated RAL7035 aluminium section/powder coat RAL7016 1 bottom cover, complete with 0.5 thick sheet steel, (rear plug extrusions version 1 thick) powder coated RAL7035 Aluminium section/powder coat RAL7016 4 M2.5 tapped strips Steel/zinc coated and yellow chrome 8 side strips in 2 colours (only ABS polycarbonate / UL 94 VO for desk-top design) RAL7035 and RAL7016. 4 feet (desk-top design only) ABS polycarbonate/ul94voral7016 1 EMC shielding material kit EMC silicon round cord with (already fitted in cases conductive outer skin(ag/cu); EL94 with high EMC shielding) VO EMC sealing strips, silver-coated; contact springs, stainless steel. 1 fixing kit. (case mounting screws in Torx design) Torx slot size TX15 Order separately: for all case types (except the rear plug up cases where it is included) 1 set of extrusions for mounting Aluminium section/clear chromate connectors/mother board Tapped strips: steel, zinc-coated & yellow chromate VEcase 4U (½U 3U ½U) 12 4U CASE (½U 3U ½U) VENTILATION FROM FRONT BELOW Depth 280mm Depth 280mm rear plug-in Depth 340mm Depth 420mm Front extrusions with Width EMC shielding EMC shielding EMC shielding EMC shielding short front lip (IEC 60297.3) inhp standard high standard high standard high standard high Desk-top design 42 864-10026L 864-10038A - - 864-10030C 864-10044J 864-10034B 864-10050F with standard 60 864-10028E 864-10040K - - 864-10032H 864-10046C 864-10036G 864-10052L front panel 84 864-10010L 864-10042D - - 864-10005L 864-10048H 864-10013B 864-10054E Desk-top design 42 864-10146J 864-10164G - - 864-10152F 864-10170D 864-10158K 864-10176H with handles 60 864-10148C 864-10166A - - 864-10154L 864-10172J 864-10160H 864-10178B 84 864-10150A 864-10168F - - 864-10156E 864-10174C 864-10162B 864-10180L Desk-top design & 19 rack 84 864-10074J 864-10086J - - 864-10076B 864-10088C 864-10078G 864-10090A 19 rack mounting 84 864-10122G 864-10128L - - 864-10124A 864-10130J 864-10126F 864-10132C Front extrusions with extended IEEE front lip Desk-top design 42 864-10025C 864-10037D - - 864-10029B 864-10043A 864-10033E 864-10049E with standard 60 864-10027H 864-10039J - - 864-10031L 864-10045F 864-10035K 864-10051C front panel 84 864-10001A 864-10041G 864-10941F 864-11443H 864-10002J 864-10047L 864-10004C 864-10053H Desk-top design 42 864-10145A 864-10163K - - 864-10151J 864-10169C 864-10157B 864-10175L with handles 60 864-10147F 864-10165D - - 864-10153C 864-10171A 864-10159G 864-10177E 84 864-10149L 864-10167J 864-10949D 864-10951B 864-10155H 864-10173F 864-10161E 864-10179K Desk-top design & 19 rack 84 864-10073L 864-10085A 864-10943L 864-10945E 864-10075E 864-10087F 864-10677K 864-10089L 19 rack mounting 84 864-10121K 864-10127C 864-10947K 864-10948G 864-10123D 864-10129H 864-10125J 864-10131F Note: front connectors with 19 fixing flange include handles.

VEcase 700 4U Case VEcase 700 cases have a high EMC shield rating as standard due to their all metal design and the way all parts are electrically continuous. If you have a particularly stringent EMC shielding requirement all versions can be supplied with EMC seals fitted. Dimensions Depending on requirements heat can be extracted in the Z direction through vents in the lower ½U front area or at right angles through vents in the lower cover. In both cases with high power there can be forced convection using fans which are installed in the rear wall. 3U high PCBs can be inserted vertically. Additional rear extrusions and Guides should be ordered for this purpose. (not with Rear Plug In designs). Dimensions table for 4U case Dimension Width42HP 60HP 84HP A 269.24 360.68 482.6 C 233.36 324.8 446.72 D 213.76 305.2 427.12 B = nominal depth of case 1.62mm Order Separately 23 28 4U CASE (½U 3U ½U) VENTILATION FROM BELOW 25/26 Front and rear panels Extrusions for mounting motherboard Front extrusions Width Depth 280mm Depth 340mm Depth 420mm With short front lip (IEC 60297.3) inhp standard EMC high EMC standard EMC high EMC standard EMC high EMC Desk-top design 42 864-10822E 864-10840C 864-10828J 864-10846G 864-10834F 864-10852D with standard 60 864-10824K 864-10842H 864-10830G 864-10848A 864-10836L 864-10854J front panel 84 864-10826D 864-10844B 864-10832A 864-10850K 864-10838E 864-10856C Desk-top design 42 864-10894D 864-10912D 864-10900C 864-10918H 864-10906G 864-10924E with handles 60 864-10896J 864-10914J 864-10902H 864-10920F 864-10908A 864-10926K 84 864-10898C 864-10916C 864-10904B 864-10922L 864-10910K 864-10928D Desk-top design & 19 rack 84 864-10858H 864-10870B 864-10860F 864-10872G 864-10862L 864-10874A 19 rack mounting 84 864-10882C 864-10888G 864-10884H 864-10890E 864-10886B 864-10892K Front extrusions with extended IEEE front lip Desk-top design 42 864-10821H 864-10839B 864-10827A 864-10845K 864-10833J 864-10851G with standard 60 864-10823B 864-10841L 864-10829F 864-10847D 864-10835C 864-10853A front panel 84 864-10825G 864-10843E 864-10831D 864-10849J 864-10837H 864-10855F Desk-top design 42 864-10893G 864-10911G 864-10899L 864-10917L 864-10905K 864-10923H with handles 60 864-10895A 864-10913A 864-10901L 864-10919E 864-10907D 864-10925B 84 864-10897F 864-10915F 864-10903E 864-10921C 864-10909J 864-10927G Desk-top design & 19 rack 84 864-10857L 864-10869A 864-10859E 864-10871K 864-10861C 864-10873D 19 rack mounting 84 864-10881F 864-10887K 864-10883L 864-10889D 864-10885E 864-10891B Note: front connectors with 19 fixing flange include handles 29 Guides, ESD clips, coding Swing handle, lateral shelltype handle 13

VEcase 700 4U Case VEcase 700 cases 4U ( 3U in the upper, 1U in the lower area) are supplied assembled as a basic case in 3 depths and 3 widths. Choice of designs as follows : Desktop case with front panels, Desktop case with handles, Desktop and 19" cases with handles and feet, Case with handles and 19 mounting flange, without feet and side steel strips Front extrusions short (IEC) or long (IEEE) front lip. Rear extrusions to fix motherboards/connector extrusions should be ordered separately. The extrusions are either supplied as a kit or ready mounted inside the case. Design with vents in the 1U front area. Design for fan assembly (119 x 119) in the base. Item/Qty/Description Material/Finish 2 Side Pieces 4U Alum. sect./painted RAL7035 4 Front Connectors (according Alum. sect./painted RAL7016 Case design in 3 versions) 1 Top Cover, complete 0.5 thick sheet steel, powder coat with 2 extrusions RAL7035 Alum. sect./powder coated RAL7016 1 Bottom Cover Hood, 1mm sh.steel, p. coated RAL7035 2 Bottom Extrusions Alum. sect./powder coated RAL7016 4 M2.5 Tapped Strips Steel/zinc coated and yellow chrom. 8 Side Strips in 2 Colours ABS polycarbonate / UL 94 VO (only for desktop design) RAL7035 or RAL7016 4 Adjust. Feet (only for ABS polycarbonate / UL 94 VO desktop design) RAL7016 1 EMC Shielding Material Kit EMC silicone cord with conducting (ready-mounted in cases outer skin (Ag/Cu); EMC sealing with high EMC shielding) strips UL94VO, silver-plated; contact springs, stainless steel. 1 Fixing Kit (Case mounting screws in Torx design) Torx slot size TX15 Order separately: 1 Set of Extrusions for Alum. sect/clear chromate mtg. plug connectors/m board Tapped Strip: St., zinc and yellow chromate VEcase 4U ( 3U 1U) 14 4U CASE (3U 1U) VENTILATION FROM BELOW Depth 280mm Depth 340mm Depth 420mm Front extrusions Width EMC shielding EMC shielding EMC shielding With short front lip (IEC 60297.3) inhp standard high standard high standard high Desk-top design 42 864-10723G 864-10741E - - - - with standard 60 864-10725A 864-10743K 864-10731J 864-10749C 864-10737B 864-11464H front panel 84 864-10727F 864-10745D 864-10733C 864-10751A 864-10739G 864-11466B Desk-top design 42 864-10780C 864-10798H - - - - with handles 60 864-10782H 864-10800H 864-10788A 864-10806A 864-10794J 864-10812J 84 864-10784B 864-10802B 864-10790K 864-10808F 864-10796C 864-10814C Desk-top design & 19 rack 84 864-11468G 864-10762E 864-11470E 864-10764K 864-11472K 864-10766D 19 rack mounting 84 864-10774F 864-10816H 864-10776L 864-10818B 864-10778E 864-10820L Front extrusions with extended IEEE front lip Desk-top design 42 864-10722K 864-10740H - - - - with standard 60 864-10724D 864-10742B 864-10730A 864-10748F 864-10736E 864-10754C front panel 84 864-10726J 864-10744G 864-10732F 864-10750D 864-10738K 864-11465E Desk-top design 42 864-10779B 864-10797L - - - - with handles 60 864-10781L 864-10799E 864-10787D 864-10805D 864-10793A 864-10811A 84 864-10783E 864-10801E 864-10789J 864-10807J 864-10795F 864-10813F Desk-top design & 19 rack 84 864-11467K 864-10761H 864-11469D 864-10763B 864-11471B 864-10765G 19 rack mounting 84 864-10773J 864-10815L 864-10775C 864-10817E 864-10777H 864-10819K Note: front connectors with 19 fixing flange include handles

VEcase 700 4U Case VEcase 700 cases have a high EMC shield rating as standard due to their all metal design and the way all parts are electrically continuous. If you have a particularly stringent EMC shielding requirement all versions can be supplied with EMC seals fitted. Depending on requirements heat extraction can be in a Z- direction through vents in the floorplate in the lower 1U front area or in a vertical direction through vents in the floorplate and in the cover. In both cases forced convection can be achieved using a fan, which is either installed in the rear wall (= Z-direction ventilation) or in the base (= vertical direction). 3U high PCBs can be inserted vertically. Additional rear extrusion and Guides should be ordered for this purpose. Dimensions table for 4U case Dimension Width 42HP 60HP 84HP A 269.24 360.68 482.6 C 233.36 324.8 446.72 D 213.76 305.2 427.12 B = nominal depth of case 1.62mm Order Separately 23 25/26 29 28 Front and rear panels Extrusions for mounting motherboard Guides, ESD clips, coding Swing handle, lateral shelltype handle 4U CASE (3U 1U) VENTILATION FROM TOP AND BOTTOM Front extrusion Width Depth 280mm Depth 340mm Depth 420mm With short front lip (IEC 60297.3) inhp standard EMC high EMC standard EMC high EMC standard EMC high EMC Desk-top design 42 864-10433G 864-10451E - - - - with standard 60 864-10435A 864-10453K 864-10441J 864-10459C 864-10447B 864-10465L front panel 84 864-10437F 864-10455D 864-10443C 864-10461A 864-10449G 864-10467E Desk-top design 42 864-10520D 864-10524C - - - - with handles 60 864-10522J 864-10526H 864-10510H 864-10532E 864-10516A 864-10538J 84 864-10506E 864-10528B 864-10512B 864-10534K 864-10518F 864-10540G Desk-top design & 19 rack 84 864-10469K 864-10481D 864-10471H 864-10483J 864-10473B 864-10485C 19 rack mounting 84 864-10493E 864-10499J 864-10495K 864-10501J 864-10497D 864-10504L Front extrusion with extended IEEE front lip Desk-top design 42 864-10432K 864-10450H - - - - with standard 60 864-10434D 864-10452B 864-10440A 864-10458F 864-10446E 864-10464C front panel 84 864-10436J 864-10454G 864-10442F 864-10460D 864-10448K 864-10466H Desk-top design 42 864-10519C 864-10523F - - - - with handles 60 864-10521A 864-10525L 864-10509G 864-10531H 864-10515D 864-10537A 84 864-10505H 864-10627E 864-10511E 864-10533B 864-10517J 864-10539F Desk-top design & 19 rack 84 864-10468B 864-10480G 864-10470L 864-10482A 864-10472E 864-10484F 19 rack mounting 84 864-10492H 864-10498A 864-10494B 864-10500A 864-10496G 864-10503C Note: front connectors with 19 fixing flange include handles 15

VEcase 700 4U Case VEcase 700 cases 4U (for horizontal mounting of 6U plug in units) are supplied assembled as a basic case in 3 depths and 3 widths. Choice of designs as follows : Desktop case with front panels, Desktop case with handles, Desktop and 19" cases with handles and feet, Case with handles and 19 mounting flange, without feet and side steel strips Front extrusion short (IEC) or long (IEEE) front lip. 60HP width case for 6U PCBs, 84HP width case for 3 and 6U PCBs. Effective opening width 28HP Rear extrusion - for the mid 6U area- and extrusion at rear for short Guides with Rear Plug In designs should be ordered separately. Quantity/Description Material/Finish 2 Side Pieces 4U Alum. sect./painted RAL7035 4 Front Connectors (3 Varieties Alum. sect./painted RAL7016 depending on design) 1 Top Cover, complete 1 thick sheet st. p. coated.ral7035 with 1 extrusion* Alum. sect./powder coated RAL7016 1 Bottom Cover, complete 1 thick sheet st. p. coated.ral7035 with 1 extrusion* Alum. sect./powder coated RAL7016 6, 10 or 12 M2.5 Tapped Steel/zinc coated & yellow chromate Strips depending on design (6 at 60HP, 10 at 84HP,12 for Rear Plug In cases 4, 8 or 12 Extrusion Alum. sect/clear chromate (depend. on design ) 2 Mounting Rail Assembly Plt. 1mm hot dip galv. sheet steel 8 Side Shield Strips in ABS polycarbonate / UL 94 VO (only with cases in desktop design) 2 Colours RAL7035 or RAL7016 4 Adjust. Feet (only with cases ABS polycarbonate / UL 94 VO in desktop design) RAL7016 1 EMC Shielding Material Kit EMC silicone cord with conducting (fitted in cases outer skin (Ag/Cu); EMC seal with high EMC shielding) strips UL94VO, silver plated; contact springs, stainless steel. 1 Fixing Kit(case mounting Torx slot size TX15 screws in Torx design) *Extrusion not available for Rear Plug In case design Order separately: 1 Set Mtg. Rails 6U area 1 Set Mtg. Rails vert. for Rear Plug In VEcase 4U for horizontal PCB mounting 16 4U CASE RIGHT HAND VENTILATION, FOR HORIZONTAL PCB RACK, EFFECTIVE WIDTH 28HP Depth 280mm Depth 340mm Depth 420mm Front extrusion Width EMC shielding EMC shielding EMC shielding With short front lip(iec 60297.3) inhp standard high standard high standard high Desk-top design with standard 60 864-10056K 864-10062G 864-10058D 864-10066F 864-10060B 864-10070J front panel 84 864-10011H 864-10064A 864-10012E 864-10068L 864-10014K 864-10072C Desk-top design 60 864-10182E 864-10194F 864-10186D 864-10198E 864-10190G 864-10202K with handles 84 864-10184K 864-10196L 864-10188J 864-10200E 864-10192A 864-10204D Desk-top design & 19 rack 84 864-10098K 864-10110F 864-10100K 864-10112L 864-10102D 864-10114E 19 rack mounting 84 864-10134H 864-10140E 864-10136B 864-10142K 864-10138G 864-10144D Front extrusion with extended IEEE front lip Desk-top design with standard 60 864-10055B 864-10061K 864-10057G 864-10065J 864-10059A 864-10069H front panel 84 864-10006H 864-10063D 864-10007E 864-10067C 864-10009K 864-10071F Desk-top design with handles 60 864-10181H 864-10193J 864-10185G 864-10197H 864-10189F 864-10201B 84 864-10183B 864-10195C 864-10187A 864-10199B 864-10191D 864-10203G Desk-top design & 19 rack 84 864-10097B 864-10109E 864-10099G 864-10111C 864-10101G 864-10113H 19 rack mounting 84 864-10133L 864-10139D 864-10135E 864-10141B 864-10137K 864-10143G Note: front connectors with 19 fixing flange include handles

VEcase 700 5U Case VEcase 700 cases 5U (½U-3U-1½U) are supplied assembled as a basic case in 3 depths and 3 widths. Choice of designs as follows : Desktop case with front panels, Desktop case with handles, Desktop and 19" cases with handles and feet, Case with handles and 19 mounting flange, without feet and side steel strips Front extrusion short (IEC) or long (IEEE) front lip. Rear extrusion to fix motherboards/connectors should be ordered separately. The extrusions are either supplied as a kit or ready fitted in the case. Design with vents in the 1½U front area. Design for fan assembly (119 x 119) in the floorplate. Case for Rear Plug In Technology. Front and rear 3U apertures. Plug size 160mm at front / 80mm at rear. (Supplied complete with all extrusion, partially assembled). Item/Qty/Description Material/Finish 2 Side Pieces 5U Alum. sect./painted RAL7035 4 Front Connectors (according Alum. sect./painted RAL7016 to case design in 3 versions) 1 Top Cover, 1mm sh.steel, p. coated RAL7035 2 (4*) Upper Extrusion Alum. sect./powder coated RAL7016 Rear Plug In colour chrom. design 1 Bottom Cover Hood, 1mm sh.steel, p. coated RAL7035 2 (4*) Bottom Extrusion Alum. sect./powder coated RAL7016 Rear Plug In colour chrom. design 4 (6*) M2.5 Tapped Strips Steel/galvanised & yellow chrome 8 Side cover Strips in ABS polycarbonate / UL 94 VO (only with cases in desktop design) 2 Colours RAL7035 or RAL7016 4 Adjust. Feet (only with cases ABS polycarbonate / UL 94 VO in desktop design) RAL7016 1 EMC Shielding Material Kit EMC silicone cord with conducting (fitted in cases with high outer skin (Ag/Cu); EMC seal EMC shielding) strips UL94VO, silver plated; contact springs, stainless steel. 1 Fixing Kit,Fixing screws in Torx design Torx slot size TX15 *=Quantity with Rear Plug In cases Order separately: for all case types (with exception of Rear Plug In cases = complete supply) 1 Set of Extrusion for mtg. connectors/m board VEcase 5U (½U-3U-1½U) 18 5U CASE (½U 3U 1½U) VENTILATION FROM FRONT BELOW Front extrusion with Width Depth 280mm Depth 280mm Rear Plug-in Depth 340mm Depth 420mm short front lip(iec 60297.3) inhpstandard EMC high EMC standard EMC high EMC standard EMC high EMC standard EMC high EMC Desk-top design 42 864-10301H 864-10319B - - - - - - with standard 60 864-10303B 864-10321L - - 864-10309F 864-10327D 864-10315C 864-10333A front panel 84 864-10305G 864-10323E - - 864-10311D 864-10329J 864-10317H 864-10335F Desk-top design 42 864-10373G 864-10391E - - - - - - with handles 60 864-10375A 864-10393K - - 864-10381J 864-10399C 864-10387B 864-10405B 84 864-10377F 864-10395D - - 864-10383C 864-10401C 864-10389G 864-10407G Desk-top design & 19 rack 84 864-10337L 864-10349A - - 864-10339E 864-10351K 864-10341C 864-10353D 19 rack mounting 84 864-10361F 864-10367K - - 864-10363L 864-10369D 864-10365E 864-10371B Front extrusion with extended IEEE front lip Desk-top design 42 864-10300L 864-10318E - - - - - - with standard 60 864-10302E 864-10320C - - 864-10308J 864-10326G 864-10314F 864-10332D front panel 84 864-10304K 864-10322H 864-10420J 864-11421F 864-10310G 864-10328A 864-10316L 864-10334J Desk-top design 42 864-10372K 864-10390H - - - - - - with handles 60 864-10374D 864-10392B - - 864-10380A 864-10398F 864-10386E 864-10404E 84 864-10376J 864-10394G 864-10428G 864-10430E 864-10382F 864-10400F 864-10388K 864-10406K Desk-top design & 19 rack 84 864-10336C 864-10348D 864-10422C 864-10424H 864-10338H 864-10350B 864-10340F 864-10352G 19 rack mounting 84 864-10360J 864-10366B 864-10426B 864-10427K 864-10362C 864-10368G 864-10364H 864-10370E Note: front connectors with 19 fixing flange include handles

VEcase 700 5U Case VEcase 700 cases have a high EMC shield rating as standard due to their all metal design and the way all parts are electrically continuous. If you have a particularly stringent EMC shielding requirement all versions can be supplied with EMC seals fitted. Depending on requirements heat can be extracted in the Z direction through vents in the lower 1½U front area or at right angles through vents in the lower cover. In both cases forced convection can be achieved using fans which are installed in the rear wall. (=Z direction ventilation) or in the floor plate (= ventilation at right angles). 3U high PCBs can be inserted vertically. Additional rear extrusion and Guides should be ordered for the purpose. (not with Rear Plug In designs). Dimensions table for 3U case Dimension Width42HP 60HP 84HP A 269.24 360.68 482.6 C 233.36 324.8 446.72 D 213.76 305.2 427.12 B = nominal depth of case 1.62mm Order Separately 23 28 25/26 29 Front and rear panels Extrusions for mounting motherboard Guides, ESD clips, coding Swing handle, lateral shelltype handle 5U CASE (½U 3U 1½U) VENTILATION FROM BELOW Front extrusion Width Depth 280mm Depth 340mm Depth 420mm With short front lip (IEC 60297.3) inhp standard EMC high EMC standard EMC high EMC standard EMC high EMC Desk-top design 42 864-10524A 864-11131L - - - - with standard 60 864-10544F 864-11133E 864-10550C 864-11139J 864-11127H 864-11145F front panel 84 864-10546L 864-11135K 864-11123J 864-11141G 864-11129B 864-11147L Desk-top design 42 864-11185A 864-11203A - - - - with handles 60 864-11187F 864-11205F 864-11193C 864-11211C 864-11199G 864-11217G 84 864-11189L 864-11207L 864-11195H 864-11213H 864-11201G 864-11219A Desk-top design & 19 rack 84 864-11149E 864-11161K 864-11151C 864-11163D 864-11153H 864-11165J 19 rack mounting 84 864-11173L 864-11179D 864-11175E 864-11181B 864-11177K 864-11183G Front extrusion with extended IEEE front lip Desk-top design 42 864-10541D 864-11130C - - - - with standard 60 864-10543J 864-11132H 864-10549B 864-11138A 864-11126L 864-11144J front panel 84 864-10545C 864-11134B 864-11122A 864-11140K 864-11128E 864-11146C Desk-top design 42 864-11184D 864-11202D - - - - with handles 60 864-11186J 864-11204J 864-11192F 864-11210F 864-11198K 864-11216K 84 864-11188C 864-11206C 864-11194L 864-11212L 864-11200K 864-11218D Desk-top design & 19 rack 84 864-11148H 864-11160B 864-11150F 864-11162G 864-11152L 864-11164A 19 rack mounting 84 864-11172C 864-11178G 864-11174H 864-11180E 864-11176B 864-11182K Note: front connectors with 19 fixing flange include handles 19

VEcase 700 5U Case VEcase 700 cases 5U ( for the horizontal mounting of 6U plug in units) are supplied assembled as a basic case in 3 depths and 3 widths.choice of designs as follows: Desktop case with front panels, Desktop case with handles, Desktop and 19"cases with handles and feet, Case with handles and 19 mounting flange, without feet and side steel strips. Front extrusion short (IEC) or long (IEEE) front lip. 60HP width case for 6U PCBs, 84HP width case for 3 and 6U PCBs. Effective opening width 36HP Rear extrusion - for the mid 6U area- and extrusion at rear for short Guides with Rear Plug In designs should be ordered separately. Quantity/Description Material/Finish 2 Side Pieces 5U Alum. sect./painted RAL7035 4 Front Connectors ( 3 varieties Alum. sect./painted RAL7016 depending on design) 1 Top Cover, complete 1mm sheet st. p. coated.ral7035 with 1 mounting rail* Alum. sect./powder coated RAL7016 1 Bottom Cover, complete 1 thick sheet st. p. coated. RAL7035 with 1 mounting rail * Alum. sect./powder coated RAL7016 6, 10 or 12 Tapped Strips, Steel/zinc coated & yellow chromate M 2.5 depending on the (6 with 60HP, 10 with 84HP, 12 with design chosen Rear Plug In Cases 4, 8 or 12 Extrusion(depend. on design)alum. sect/clear chromate 2 Mounting Rail Assembly Plt. 1mm hot dip galv. sheet steel 8 Side Shield Strips in 2 Colours ABS polycarbonate / UL 94 VO (only with cases in desktop design) RAL7035 and RAL7016 4 Adjust. Feet (only with ABS polycarbonate /UL 94 VO cases in desktop design) RAL7016 1 EMC Shielding Material Kit EMC silicone cord with conducting (fitted in cases with high outer skin (Ag/Cu); EMC seal EMC shielding) strips UL94VO, silver plated; & contact springs, stainless steel. 1 Fixing Kit (case mounting screws in Torx design)torx slot size TX15 *Extrusion not available for Rear Plug In case design Order separately: 1 Set Mtg. Rails 6U rear middle area incl. tap. & insul. strips 1 Set Mtg. Rails vertical for Rear Plug In VEcase 5U for horizontal PCB mounting 20 5U CASE RIGHT HAND VENTILATION, FOR HORIZONTAL CARD MOUNTING, EFFECTIVE WIDTH 36HP Depth 280mm Depth 340mm Depth 420mm Front extrusion Width EMC shielding EMC shielding EMC shielding With short front lip inhp standard high standard high standard high Desk-top design with standard 60 864-10205A 864-10211J 864-10207F 864-10215H 864-10209L 864-10219G front panel 84 864-10015G 864-10213C 864-10018J 864-10217B 864-10020G 864-10221E Desk-top design 60 864-10259B 864-10271G 864-10263E 864-10275F 864-10267D 864-10279E with handles 84 864-10261L 864-10273A 864-10265K 864-10277L 864-10269J 864-10281C Desk-top design & 19 rack 84 864-10223K 864-10235L 864-10225D 864-10237E 864-10227J 864-10239K 19 rack mounting 84 864-10247A 864-10253J 864-10249F 864-10255C 864-10251D 864-10257H Front extrusion with extended IEEE front lip Desk-top design with standard 60 864-10023J 864-10210A 864-10206J 864-10214L 864-10208C 864-10218K front panel 84 864-10016D 864-10212F 864-10017A 864-10216E 864-10019F 864-10220H Desk-top design with handles 60 864-10258E 864-10270K 864-10262H 864-10274J 864-10266G 864-10278H 84 864-10260C 864-10272D 864-10264B 864-10276C 864-10268A 864-10280F Desk-top design & 19 rack 84 864-10222B 864-10234C 864-10224G 864-10236H 864-10226A 864-10238B 19 rack mounting 84 864-10246D 864-10252A 864-10248J 864-10254F 864-10250G 864-10256L Note: front connectors with 19 fixing flange include handles

VEcase 700 Accessories CONSTRUCTION Rear Extrusion Rear extrusions are needed to take Guides and for mounting motherboards. You can also choose from TYPE 1 and TYPE 2. TYPE 1- for indirect motherboard mounting (with insul. strips) TYPE 2- for direct motherboard mounting DIN 41612 connectors can be fitted using extrusion or wiring frames. The assembly kits should be chosen to fit the case design and are supplied assembled with the case, or alternatively unassembled as a kit. VEcase Accessories Note: For the electronics case VEcase 700 /3U/ 240 no extrusion can be ordered as they are already integrated in the top and bottom sections. Quantity Description Material / Finish TYPE 1 TYPE 2 Rear Mtg. Rails Alum. Sect. Cl. Chrom. 2 2 M2.5 Tapped Strips Zinc & Ye Chrom. 2 2 PVC Insul. Str., Grey, 1 Thick ; UL94VO 2 M4 Fix. Screws, with Torx slot size TX15 15 4 4 Rear mounting rail type 1 Rear mounting rail type 2 CASE CONSTRUCTION PARTS FOR VERTICAL CARD RACK Case type Width Assembled Unassembled TYPE 1 42 864-011388D 864-011389A TYPE 2 42 864-011445B 864-011448D TYPE 1 60 864-011390B 864-011391K TYPE 2 60 864-011446K 864-011449A TYPE 1 84 864-011392G 864-011393D TYPE 2 84 864-011447G 864-011450B Rear Extrusion (case type) 2U 3U 4U Case type Width Assembled Unassembled TYPE 1 42 864-010282L 864-010288D TYPE 2 42 864-010285B 864-010291K TYPE 1 60 864-010283H 864-010289A TYPE 2 60 864-010286K 864-010292G TYPE 1 84 864-010284E 864-010290B TYPE 2 84 864-010287G 864-010293D 4U (½U-3U-½U) 5U (½U-3U-1½U) 22 Case type Width Assembled Unassembled TYPE 1 42 864-011451K 864-011454A TYPE 2 42 864-011457C 864-011460J TYPE 1 60 864-011452G 864-011455J TYPE 2 60 864-011458L 864-011461F TYPE 1 84 864-011453D 864-011456F TYPE 2 84 864-011459H 864-011462C 4U (3U-1U)

VEcase 700 Case accessories Accepts 6U horizontally-mounted plug-in modules into 4U and 5U case/rear carrier rails. If a support system or screw fastenings are necessary when mounting 6U motherboards at the centre, a set of motherboard mounting extrusion can be placed at the centre. These consist of a type 1 double extrusion, with tapped strips and insulating strip. If the case is intended for rear plug-in use and the rear 80mm deep plug-in modules are guided on Guides, you need to order vertical carrier rails. The carrier rails are supplied loose. They should be assembled after the midplane has been mounted. Central rear carrier rails for mounting mother boards To provide support at the centre when mounting 6U mother boards. Quantity/Description Material / Finish 2 Type 1 double rear extrusion Aluminium, clear chromate 2 M2.5 tapped strip Galvanised steel, yellow chromate 2 Double insulating strip PVC, grey, 1 thick: UL94VO 4 M4 screw fasteners, with Torx head, size 15 VEcase Accessories REAR CENTRAL CARRIER RAILS For case height Assembled Unassembled 4U, width 28 HP 864-11473G 864-11474D 5U, width 36 HP 864-11477F 864-11478C VEcase Accessories REAR CARRIER RAILS, FOR PLUG-IN AT REAR To accept short Guides for 80mm rear I/O plug-in modules. Mounted vertically. Quantity/Description Material/Finish 2 Rear carrier rails, vertical Aluminium, clear chromate 4 M4 Screw Fixings, with Torx head, size 15 For case height Unassembled 4U, width 28 HP 864-11397C 5U, width 36 HP 864-11399H VEcase Accessories CASE TYPE 4U for 28 HP boards (horizontal mounting) 5U for 36 HP boards (horizontal mounting) 23

VEcase 700 Case accessories Front and rear panels All types of front panels, front panel sections, and cassettes from the KM6-II range can be used. For strict EMC shielding requirements, and for caseframe designs compliant with IEEE 1101.10 you can choose front panels and cassettes from the KM6-RF range. In addition there are two designs of front and rear panels for the VEcase - plain and ventilated. Type 1: In 2.5mm chromated aluminium, with the outer, visible, faces only, painted in RAL 7035. Extruded features at the left and right ends of the panel provide IEEE1101.10 compatible geometry. Available in blank, ventilated and fan compatible versions Quantity/Description Material / Finish 1 Front/rear panel 2.5mm thick aluminium, powder coated, RAL 7035, contact surface chromate Extruded features left & right Aluminium, clear chromate EMC spring Stainless steel 1 set bushes and screws Metal, chromed 1 set fixings Steel VEcase 700 accessories TYPE 1 FRONT AND REAR PANELS Height HP mm Dim.A I blank II ventilated III fan mounting 2U 42 212,96 864-11488K 864-11494G - 60 304,4 864-11489G 864-11495D - 84 426,32 864-11490H 864-11496A - 3U 42 212,96 864-11463L 864-11505B - 60 304,4 864-11500F 864-11506K 864-11512G 84 426,32 864-11501C 864-11507G 864-11513D 4U 42 212,96 864-11517C 864-11523L 864-11529D 60 304,4 864-11518L 864-11524H 864-11530E 84 426,32 864-11519H 864-11525E 864-11531B 5U 42 212,96 864-11535A 864-11541J 864-11547B 60 304,4 864-11536J 864-11542F 864-11548K 84 426,32 864-11537F 864-11543C 864-11549G Type 2: 1.0mm steel, painted in RAL 7035 on the front. Contact surfaces are unpainted, and galvanised. Blank, ventilated and fan versions. Quantity/Description Material / Finish 1 Rear panel 1.0 mm thick steel, powder coated, RAL7035; Contact surface,galvan. 1 set Fixings Steel Fan rear panels Dim B in mm: 2U 84,04 3U 128,5 4U 172,95 5U 217,4 Version I Version II 24 TYPE 2 FRONT AND REAR PANELS Height HP mm Dim.A I blank II ventilated III fan mounting 2U 42 212,96 864-11485H 864-11491E - 60 304,4 864-11486E 864-11492B - 84 426,32 864-11487B 864-11493K - 3U 42 212,96 864-11497J 864-11502L 864-11508D 60 304,4 864-11498F 864-11503H 864-11509A 84 426,32 864-11499C 864-11504E 864-11510B 4U 42 212,96 864-11514A 864-11520J 864-11526B 60 304,4 864-11515J 864-11521F 864-11527K 84 426,32 864-11516F 864-11522C 864-11528G 5U 42 212,96 864-11532K 864-11538C 864-11544L 60 304,4 864-11533G 864-11539L 864-11545H 84 426,32 864-11534D 864-11540A 864-11546E Version III Version III Note for types 1 and 2: Front and rear panels for version III annotated with the symbol are designed for fan size 119 2, all other front and rear panels are designed for fan size 92 2.

VEcase 700 Case accessories Front and rear panels for PC/CPCI systems Front and rear panels to accept PC power supplies. These panels are supplied in 3U/36HP, 4U/84HP and 5U/84HP in two designs type 1 and type 2 (version IV). The 36HP wide front panel is best for use in 5U cases with horizontally mounted boards. However, it can be mounted into all cases that accept 3U vertical boards. Rear panel to accept 119 2 fan and IEC socket. The rear panels are particularly suited for VEcase 4 and 5U cases with vertical card insertion. Ventilation is fan-assisted with air flow at right-angles. This version III is available in type 1 and type 2 designs. Type 1. In 2.5mm chromated aluminium, with the outer, visible, faces only painted in RAL7035. Extruded features at the left and right ends of the panel provide IEEE1101.10 compatible geometry. Version III panels are for fan mounting and version IV and are for power supply mounting. Quantity/Description Material / Finish 1 Front/rear panel 2.5 mm thick aluminium powder coated, RAL 7035 Contact elements stainless steel 1 Set bushes and screws Metal, Chrome VEcase 700 accessories TYPE 1 FRONT AND REAR PANELS Height HP mm Dim.A II fan mounting III psu mounting 3U 36-864-11494G 4U 84 172,9 864-11551E 864-11552B 5U 84 217,4 864-11554G 864-11555D Type 2: 1.0 mm steel, painted in RAL 7035 on the front. The contact surfaces are unpainted, and galvanised. Version III for fan mounting, and IV for PSU mounting. Type 1 front and rear panels Quantity/Description Material / Finish 1 Rear panel 1.0 mm thick steel, powder coated, RAL 7035; Contact surface galvan. 1 set Fixings Steel TYPE 2 FRONT AND REAR PANELS Dimensions Version IV 182,48 (36HP) 128,5(3U) Height HP mm Dim.A III fan mounting IV psu mounting Version IV 426,32 3U 36-864-11558F 4U 84 172,9 864-11550H 864-11557J 5U 84 217,4 864-11553K 864-11559C Version III Version III 25