MINIATURE MICROSWITCHES - STANDARD

0/08 MINIATURE MICROSWITCHES - STANDARD VD - 8 C-spring snap-action mechanism with wiping contacts Ratings from 0.0 A Vc up to A 0 Va and hp Va / hp 0 Va Broad range of operating forces from 0. N to N Operating temperature from -0 C up to +00 C Wide choice of connections Housing material complying with IEC 0- for unattended appliances: GWFI 80 C / GWIT 77 C ENEC and curus approved Choice of pre-assembled actuators on possible fixing positions Main specifications Standard 8 High current 8 High force 8 Low force 8 Very low force 8 Low current 88 Low current Low force 89 Function Connections I (changeover) W (screw) 800 800 800 800 800 8800 8900 I (changeover) W (solder) 80 80 80 80 80 880 890 I (changeover) W (QC.x0.8) 80 80 80 80 80 880 890 I (changeover) WR (QC.x0.8, Rast ) 80 80 80 80 80 880 890 I (changeover) WA (QC.8x0.) 80 80 80 80 80 880 890 I (changeover) WD8 (QC.8x0.8) 80 80 80 80 80 880 890 I (changeover) W7A (QC.8x0.) 80-80 80 80 880 890 I (changeover) X (PCB, rear) 807-807 807 807 8807 8907 I (changeover) X (PCB, front) 808-808 808 808 8808 8908 I (changeover) X (PCB, straight) 809-809 809 809 8809 8909 R (norm. closed) W (screw) 80 80 80 80 80 880 890 R (norm. closed) W (solder) 8 8 8 8 8 88 89 R (norm. closed) W (QC.x0.8) 8 8 8 8 8 88 89 R (norm. closed) WR (QC.x0.8, Rast ) 8 8 8 8 8 88 89 R (norm. closed) WA (QC.8x0.) 8 8 8 8 8 88 89 R (norm. closed) WD8 (QC.8x0.8) 8 8 8 8 8 88 89 R (norm. closed) W7A (QC.8x0.) 8-8 8 8 88 89 C (norm. open) W (screw) 880 880 880 880 880 8880 8980 C (norm. open) W (solder) 88 88 88 88 88 888 898 C (norm. open) W (QC.x0.8) 88 88 88 88 88 888 898 C (norm. open) WR (QC.x0.8, Rast ) 88 88 88 88 88 888 898 C (norm. open) WA (QC.8x0.) 88 88 88 88 88 888 898 C (norm. open) WD8 (QC.8x0.8) 88 88 88 88 88 888 898 C (norm. open) W7A (QC.8x0.) 88-88 88 88 888 898 Electrical characteristics Rating nominal / 0 V AC (A) 0 - - Rating thermal / 0 V AC (A) 0 0 7. - - Operating range / V AC/DC (A) - - - - - 0.00 0.0 0.00 0.0 Rating ENEC/NF / 0 V AC (A) () 0(8) () () () 0.(0.0) 0.(0.0) Rating UL / /0 V AC (A) 8 0. 0. Rating UL hp / /0 V AC -* hp/hp -* /hp /0hp - - Mechanical characteristics Maximum operating force (N) 0. 0. 0. Min. Release force (N) 0. 0. 0. 0. 0.0 0. 0.0 Maximum total travel force (N). 0.8 0.. 0. Max. Allowable overtravel force (N) 0 0 0 0 0 0 0 Rest position max. (mm)....... Operating position (mm).7 ±0..7 ±0..7 ±0..7 ±0..7 ±0..7 ±0..7 ±0. Maximum differential travel (mm) 0. 0. 0. 0. 0. 0. 0. Min. overtravel (mm)....... Ambient operating temperature ( C) -0 + -0 + -0 + -0 + -0 + -0 +0-0 +0 Mechanical life for / OT (operations) 0 0 0 0 0 0 0 Contact gap (mm) 0. 0. 0. 0. 0. 0. 0. Weight (g) * Also available with /hp (8 SP9, 8 SP9) Additional specifications - Case, Button: PET GF (UL 9-V0 / GWFI 90 C / GWIT 77 C) - Contacts: silver alloy or gold plated (88/9) - Terminals: brass, silver-plated brass (W, X) - Levers: stainless steel, polyamide roller - Certification marks: - Degree of protection: IP0 (mechanism) - Proof tracking index: PTI 0 (PTI 00 on request) - Protection against electric shock: button and actuators mounted on position B have reinforced insulation for Ui 0V / Uimp,kV / pollution - Recommended min actuating speed: 8/8: 0. mm/s 8/88: mm/s 8/8/89: mm/s Standard product Product made to order Contact us

0/08 Product adaptations Special levers: special shapes and lengths Lever mounted on position A for higher ratio Special connections: angled, screw with clamp (W-SP98), solder with enlarged hole (W-SP98), RAST. (WR.-SP907), Higher operating force: max N (8 SP9, 8 SP97) +00 C versions: max 8A, ENEC and curus approved (8-8-88-89 SP98) A curus approved version (8 SP90) Telescopic plunger and adjustable fixing by threaded barrel: plastic and metal versions (consult us) Principles Single break snap-action switch Changeover - SPDT (form C) Normally closed - SPST-NC (form B) Normally open - SPST-NO (form A) Curves Operating curve for types 8 / 8 Operating curve for type 8 Operating curve for type 8 Operating curve for type 8 0 L { R = ms ~ cos ϕ = 0,8 0 L { R = ms ~ cos ϕ = 0,8 0 L { R = ms ~ cos ϕ = 0,8 0 L { R = ms ~ cos ϕ = 0,8 0 0 0 0 0 0, 0, 0 0 0 0 0, 0, 0 0 0, 0, B Number of cycles B Number of cycles B Number of cycles B Number of cycles C Resistive circuit C Resistive circuit C Resistive circuit C Resistive circuit D Inductive circuit D Inductive circuit D Inductive circuit D Inductive circuit E Current in Amps E Current in Amps E Current in Amps E Current in Amps F Mechanical life limit F Mechanical life limit F Mechanical life limit F Mechanical life limit Electrical life for 88/89: Va/c ma: 0 000 cycles* Va/c 0 ma: 0 000 cycles* * For longer electrical life, please consult us Dimensions Product 8.8. ± 0. 0. ± 0..8 Ø. - + 0. 0.0 0. ± 0.. - + 0. 0.0. 9.8.9 0. ± 0...8 8. 7.8 Lever mounting position B (standard) Lever mounting position A (optional) Total travel position =. max

0/08 Connections W screw W solder W quick-connect. x 0.8 8... Ø. + 0. - 0 Ø. + - 0 0. 9. 0.8 ± 0.0.8 9..8. 9... XM. 8.. 0.8 9.8.9 0.8 ± 0.0 8.8 WR quick-connect. x 0.8 for RAST connector. ± 0. WA quick-connect.8 x 0. WD8 quick-connect.8 x 0.8 7.min...7. ± 0. Ø. ± 0.0.8 ± 0. 9.8 ± 0. min 0.8 ± 0.0. ± 0.. ± 0. ± 0. Ø. ± 0. 9. 0.. 0. ± 0.0. Ø. + 0. - 0. 8.8 9.. ± 0. 0.8 ± 0.0 0. 7. ± 0..8 W7A quick-connect.8 x 0. X for printed circuit board, straight output X for printed circuit board, rear output. ± 0. Ø. +0. - 0.8 ± 0. ± 0.. ± 0. 7. +0. - 0..8. Max.. ± 0. 0. 9. 0. ± 0.0.8.8 0. ± 0.0.8 9. ± 0. ± 0.. ± 0..9 ± 0.. ± 0. view A view A 9. 7.7 0.8 ± 0.0.. X for printed circuit board, front output. Max. WR. for RAST. connector (SP907). Other shapes and dimensions: consult us.8. +0-0. ± 0.. ± 0. 9. 7.7 0.8 ± 0.0.. 9.8 ± 0. min.. ± 0. 0.8 ± 0.0 ± 0. ± 0.

.7 SWITCHES.CROUZET.COM 0/08 Actuator mounting positions.7 Pos B (standard).7 Pos A (optional) 0.8 Actuators 0A flat 0E roller 0F dummy roller 0.7x R Ø.8x.. R 0.7x 90 R 0G dummy roller R.8 R. 0.7x Other shapes and dimensions: consult us.

0/08 Actuators and mounting accessories Mechanical characteristics Lever 0A R. Pos B Lever 0A R. Pos B Lever 0A R0 Pos B Lever 0A R0 Pos B Lever 0F R. Pos B Lever 0E R.7 Pos B Lever 0E R. Pos B Lever 0G R.8 Pos B Length of actuator (mm) Maximum operating force (N) Minimum release force (N) Operating position (mm) Minimum overtravel (mm) Maximum differential travel (mm) 8. 0.. ±0.. 0. 8. 0.. ±0.. 0. 8. 0.. ±0.. 0. 8. 0. 0.. ±0.. 0. 8. 0. 0.0. ±0.. 0. 88. 0.. ±0.. 0. 89. 0. 0.0. ±0.. 0. 8. 0.. ± 0.8.8 8. 0.. ± 0.8.8 8. 0. 0.. ± 0.8.8 8. 0. 0.0. ± 0.8.8 8. 0. 0.0. ± 0.8.8 88. 0. 0.. ± 0.8.8 89. 0. 0.0. ± 0.8.8 8 0 0. 0.. ±.8.. 9. 8 0 0. 0.. ±.8.. 9. 8 0 0. 0.0. ±.8.. 9. 8 0 0. 0.0. ±.8.. 9. 8 0 0.08 0.0. ±.8.. 9. 88 0 0. 0.0. ±.8.. 9. 89 0 0.08 0.0. ±.8.. 9. 8 0 0. 0.. ±.. 8 0 0. 0.. ±.. 8 0 0. 0.0. ±.. 8 0 0. 0.0. ±.. 8 0 0.0 0.0. ±.. 88 0 0. 0.0. ±.. 89 0 0.0 0.0. ±.. 8..0 0. 0. ±.8 0.7. 8..0 0. 0. ±.8 0.7. 8. 0. 0. 0. ±.8 0.7. 8. 0.7 0.0 0. ±.8 0.7. 8. 0. 0.0 0. ±.8 0.7. 88. 0. 0. 0. ±.8 0.7. 89. 0. 0.0 0. ±.8 0.7. 8.7 0. 0. ±0.8. 0. 8.7 0. 0. ±0.8. 0. 8.7 0. 0. ±0.8. 0. 8.7 0. 0. 0. ±0.8. 0. 8.7 0. 0.0 0. ±0.8. 0. 88.7 0. 0. ±0.8. 0. 89.7 0. 0.0 0. ±0.8. 0. 8. 0. 0. ±. 0.8.8 8. 0. 0. ±. 0.8.8 8. 0. 0. 0. ±. 0.8.8 8. 0. 0.0 0. ±. 0.8.8 8. 0. 0.0 0. ±. 0.8.8 88. 0. 0. 0. ±. 0.8.8 89. 0. 0.0 0. ±. 0.8.8 8.8 0. 9.9 ±0.7. 0. 8.8 0. 9.9 ±0.7. 0. 8.8 0. 9.9 ±0.7. 0. 8.8 0. 0. 9.9 ±0.7. 0. 8.8 0. 0.0 9.9 ±0.7. 0. 88.8 0. 9.9 ±0.7. 0. 89.8 0. 0.0 9.9 ±0.7. 0. Maximum total travel (mm)

0/08 VD - 8 microswitches with referenced actuators Actuators Function Connection Lever 0A R. Pos B Lever 0A R. Pos B Lever 0A R0 Pos B Type 8 8 8 8 8 88 89 I W 800 800 800 800 800 8800 8900 I W 80 80 80 80 80 880 890 I W 80 80 80 80 80 880 890 I WR 80 80 80 80 80 880 890 I WA 80 80 80 80 80 880 890 I WD8 80 80 80 80 80 880 890 I W7A 80-80 80 80 880 890 I X 807-807 807 807 8807 8907 I X 808-808 808 808 8808 8908 I X 809-809 809 809 8809 8909 R W 80 80 80 80 80 880 890 R W 8 8 8 8 8 88 89 R W 8 8 8 8 8 88 89 R WR 8 8 8 8 8 88 89 R WA 8 8 8 8 8 88 89 R WD8 8 8 8 8 8 88 89 R W7A 8-8 8 8 88 89 C W 880 880 880 880 880 8880 8980 C W 88 88 88 88 88 888 898 C W 88 88 88 88 88 888 898 C WR 88 88 88 88 88 888 898 C WA 88 88 88 88 88 888 898 C WD8 88 88 88 88 88 888 898 C W7A 88-88 88 88 888 898 I W 800 800 800 800 800 8800 8900 I W 80 80 80 80 80 880 890 I W 80 80 80 80 80 880 890 I WR 80 80 80 80 80 880 890 I WA 80 80 80 80 80 880 890 I WD8 80 80 80 80 80 880 890 I W7A 80-80 80 80 880 890 I X 807-807 807 807 8807 8907 I X 808-808 808 808 8808 8908 I X 809-809 809 809 8809 8909 R W 80 80 80 80 80 880 890 R W 8 8 8 8 8 88 89 R W 8 8 8 8 8 88 89 R WR 8 8 8 8 8 88 89 R WA 8 8 8 8 8 88 89 R WD8 8 8 8 8 8 88 89 R W7A 8-8 8 8 88 89 C W 880 880 880 880 880 8880 8980 C W 88 88 88 88 88 888 898 C W 88 88 88 88 88 888 898 C WR 88 88 88 88 88 888 898 C WA 88 88 88 88 88 888 898 C WD8 88 88 88 88 88 888 898 C W7A 88-88 88 88 888 898 I W 800 800 800 800 800 8800 8900 I W 80 80 80 80 80 880 890 I W 80 80 80 80 80 880 890 I WR 80 80 80 80 80 880 890 I WA 80 80 80 80 80 880 890 I WD8 80 80 80 80 80 880 890 I W7A 80-80 80 80 880 890 I X 807-807 807 807 8807 8907 I X 808-808 808 808 8808 8908 I X 809-809 809 809 8809 8909 R W 80 80 80 80 80 880 890 R W 8 8 8 8 8 88 89 R W 8 8 8 8 8 88 89 R WR 8 8 8 8 8 88 89 R WA 8 8 8 8 8 88 89 R WD8 8 8 8 8 8 88 89 R W7A 8-8 8 8 88 89 C W 880 880 880 880 880 8880 8980 C W 88 88 88 88 88 888 898 C W 88 88 88 88 88 888 898 C WR 88 88 88 88 88 888 898 C WA 88 88 88 88 88 888 898 C WD8 88 88 88 88 88 888 898 C W7A 88-88 88 88 888 898 Standard product Product made to order Contact us

7 0/08 Actuators Function Connection Lever 0A R0 Pos B Lever 0F R. Pos B Lever 0E R.7 Pos B Type 8 8 8 8 8 88 89 I W 800 800 800 800 800 8800 8900 I W 80 80 80 80 80 880 890 I W 80 80 80 80 80 880 890 I WR 80 80 80 80 80 880 890 I WA 80 80 80 80 80 880 890 I WD8 80 80 80 80 80 880 890 I W7A 80-80 80 80 880 890 I X 807-807 807 807 8807 8907 I X 808-808 808 808 8808 8908 I X 809-809 809 809 8809 8909 R W 80 80 80 80 80 880 890 R W 8 8 8 8 8 88 89 R W 8 8 8 8 8 88 89 R WR 8 8 8 8 8 88 89 R WA 8 8 8 8 8 88 89 R WD8 8 8 8 8 8 88 89 R W7A 8-8 8 8 88 89 C W 880 880 880 880 880 8880 8980 C W 88 88 88 88 88 888 898 C W 88 88 88 88 88 888 898 C WR 88 88 88 88 88 888 898 C WA 88 88 88 88 88 888 898 C WD8 88 88 88 88 88 888 898 C W7A 88-88 88 88 888 898 I W 800 800 800 800 800 8800 8900 I W 80 80 80 80 80 880 890 I W 80 80 80 80 80 880 890 I WR 80 80 80 80 80 880 890 I WA 80 80 80 80 80 880 890 I WD8 80 80 80 80 80 880 890 I W7A 80-80 80 80 880 890 I X 807-807 807 807 8807 8907 I X 808-808 808 808 8808 8908 I X 809-809 809 809 8809 8909 R W 80 80 80 80 80 880 890 R W 8 8 8 8 8 88 89 R W 8 8 8 8 8 88 89 R WR 8 8 8 8 8 88 89 R WA 8 8 8 8 8 88 89 R WD8 8 8 8 8 8 88 89 R W7A 8-8 8 8 88 89 C W 880 880 880 880 880 8880 8980 C W 88 88 88 88 88 888 898 C W 88 88 88 88 88 888 898 C WR 88 88 88 88 88 888 898 C WA 88 88 88 88 88 888 898 C WD8 88 88 88 88 88 888 898 C W7A 88-88 88 88 888 898 I W 8007 8007 8007 8007 8007 88007 89007 I W 807 807 807 807 807 8807 8907 I W 807 807 807 807 807 8807 8907 I WR 807 807 807 807 807 8807 8907 I WA 807 807 807 807 807 8807 8907 I WD8 807 807 807 807 807 8807 8907 I W7A 807-807 807 807 8807 8907 I X 8077-8077 8077 8077 88077 89077 I X 8087-8087 8087 8087 88087 89087 I X 8097-8097 8097 8097 88097 89097 R W 807 807 807 807 807 8807 8907 R W 87 87 87 87 87 887 897 R W 87 87 87 87 87 887 897 R WR 87 87 87 87 87 887 897 R WA 87 87 87 87 87 887 897 R WD8 87 87 87 87 87 887 897 R W7A 87-87 87 87 887 897 C W 8807 8807 8807 8807 8807 88807 89807 C W 887 887 887 887 887 8887 8987 C W 887 887 887 887 887 8887 8987 C WR 887 887 887 887 887 8887 8987 C WA 887 887 887 887 887 8887 8987 C WD8 887 887 887 887 887 8887 8987 C W7A 887-887 887 887 8887 8987 Standard product Product made to order Contact us

8 0/08 Actuators Function Connection Lever 0E R. Pos B Lever 0G R.8 Pos B Type 8 8 8 8 8 88 89 I W 8008 8008 8008 8008 8008 88008 89008 I W 808 808 808 808 808 8808 8908 I W 808 808 808 808 808 8808 8908 I WR 808 808 808 808 808 8808 8908 I WA 808 808 808 808 808 8808 8908 I WD8 808 808 808 808 808 8808 8908 I W7A 808-808 808 808 8808 8908 I X 8078-8078 8078 8078 88078 89078 I X 8088-8088 8088 8088 88088 89088 I X 8098-8098 8098 8098 88098 89098 R W 808 808 808 808 808 8808 8908 R W 88 88 88 88 88 888 898 R W 88 88 88 88 88 888 898 R WR 88 88 88 88 88 888 898 R WA 88 88 88 88 88 888 898 R WD8 88 88 88 88 88 888 898 R W7A 88-88 88 88 888 898 C W 8808 8808 8808 8808 8808 88808 89808 C W 888 888 888 888 888 8888 8988 C W 888 888 888 888 888 8888 8988 C WR 888 888 888 888 888 8888 8988 C WA 888 888 888 888 888 8888 8988 C WD8 888 888 888 888 888 8888 8988 C W7A 888-888 888 888 8888 8988 I W 8009 8009 8009 8009 8009 88009 89009 I W 809 809 809 809 809 8809 8909 I W 809 809 809 809 809 8809 8909 I WR 809 809 809 809 809 8809 8909 I WA 809 809 809 809 809 8809 8909 I WD8 809 809 809 809 809 8809 8909 I W7A 809-809 809 809 8809 8909 I X 8079-8079 8079 8079 88079 89079 I X 8089-8089 8089 8089 88089 89089 I X 8099-8099 8099 8099 88099 89099 R W 809 809 809 809 809 8809 8909 R W 89 89 89 89 89 889 899 R W 89 89 89 89 89 889 899 R WR 89 89 89 89 89 889 899 R WA 89 89 89 89 89 889 899 R WD8 89 89 89 89 89 889 899 R W7A 89-89 89 89 889 899 C W 8809 8809 8809 8809 8809 88809 89809 C W 889 889 889 889 889 8889 8989 C W 889 889 889 889 889 8889 8989 C WR 889 889 889 889 889 8889 8989 C WA 889 889 889 889 889 8889 8989 C WD8 889 889 889 889 889 8889 8989 C W7A 889-889 889 889 8889 8989 Installation recommendations See Basic technical concepts How to order Use the 8 digit part numbers when they are defined Other cases, precise: Type of microswitch - Function - Connection - Actuator* - Fixing position* - Adaptation* Example: 8 I W 0E R.7 A SP98 Standard product Product made to order Contact us

9 0/08 Examples of special adaptations Telescopic plunger and adjustable fixing Metal version for heavy duty 00 C max operating temperature Stainless steel roller lever 00 C max operating temperature For use in irradiated environment Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warrantly or any form of contractual commitment. Crouzet Automatismes SAS and its subsidiaries reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use or application of our products and it is the responsability of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition, deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not been expressly agreed by us prior to the sale of our products.