Draft Proposal for 01 series of amendments to UN Regulation No.0 (International Whole Vehicle Type Approval)

Similar documents
Finalization of Annex 4 of UN Regulation No.0

Economic and Social Council

APPENDIX 2-C-1 UN REGULATIONS APPLIED BY BOTH PARTIES

Economic and Social Council

(Text with EEA relevance)

UN Regulation No. 0 Second draft UNIFORM PROVISIONS CONCERNING INTERNATIONAL WHOLE VEHICLE TYPE APPROVAL (IWVTA)

Certificate of Appointment. Eurofins Product Service GmbH

Certificate of Appointment

Certificate of Appointment

LIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 16 th December Automotive Vehicles - Rear - View Mirrors Specification

LIST OF AUTOMOTIVE INDUSTRY STANDARDS. AIS No. Title Status as on 29 th February Automotive Vehicles - Rear - View Mirrors Specification

Conformity of Production Compliance Statement

ANNEXES. to the. Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Economic and Social Council

Conformity of Production Compliance Statement

Conformity of Production Compliance Statement

Sr. No. AIS No.` and its Amendment/s. Title

STATUTORY INSTRUMENTS. S.I. No. 449 of 2007 EUROPEAN COMMUNITIES (MOTOR VEHICLES UN ECE TYPE APPROVAL) (AMENDMENT) REGULATIONS 2007

Economic and Social Council

LIST OF PUBLISHED STANDARDS

Economic and Social Council

Economic and Social Council

JASIC Contribution to realize Mutual Recognition of Approval May, 2006 Tadaomi AKIBA Executive Director JASIC

ECE Regulation N th session of GRSP December 2013

ECE Regulation N th session of GRSP December Informal document GRSP (54 th GRSP, December 2013, agenda item 19)

E/ECE/324/Rev.1/Add.47/Rev.6/Amend.4 E/ECE/TRANS/505/Rev.1/Add.47/Rev.6/Amend.4

Economic and Social Council

The UNECE World Forum for Harmonization of Vehicle Regulations (WP.29)

Economic and Social Council

REGULATIONS Official Journal of the European Union L 200/1

Korea s Policy towards Vehicle Safety Standards Harmonization

ECE Regulation N th session of GRSP May Informal document GRSP Rev.1 (55 th GRSP, May 2013, agenda item 18)

Economic and Social Council

Electric Vehicles Engineering Approval Evaluation Program 电动汽车定型试验规程

} Rev.1/Add.52/Rev.2/Amend.2

STATUTORY INSTRUMENTS. S.I. No. 127 of 2009 EUROPEAN COMMUNITIES (MOTOR VEHICLES TYPE APPROVAL) REGULATIONS 2009

Future Automotive Regulations - AAPC s Vision - Driving Vision News Workshop January 16, 2019

Economic and Social Council

Legislative Alignment with the Old Approach Directives. Page 1 of 33

Economic and Social Council

Economic and Social Council

Economic and Social Council

NZ Transport Agency specifications for the approval of warrant of fitness checksheets

Economic and Social Council

SPECIFICATION OF PARTS, COMPONENTS OR ASSEMBLIES AND RELEVANT STANDARDS FOR MANUFACTURE OF VEHICLES 1

Current Situation of Vehicle Safety Standards Harmonization

B COMMISSION DELEGATED REGULATION (EU)

Economic and Social Council

Economic and Social Council

Benefits of Adopting a Flexible Motor Vehicle Certification System in Vietnam

Automotive Regulations and Certification Processes: Global Manufacturers Perspective

Introduction to Automotive e marking/ E Marking

E/ECE/324/Add.5/Rev.6/Amend.2 E/ECE/TRANS/505/Add.5/Rev.6/Amend.2

Vehicle Testing& Homologation

Economic and Social Council

GCC Standardization Organization (GSO) List of GSO Technical Regulations for Motor Vehicles. (2020 Model Year)

Rule No. 1. Scope Definitions Periodicity of technical inspections Technical inspection Inspection requirements...

Amendments to the Convention on Road Traffic (Vienna 1968) - ECE/TRANS/WP.1/2011/4 vs ECE/TRANS/WP.29/2011/47

UN vehicle regulations agreements

Economic and Social Council

Basis of this document is: Addendum 47: Regulation No. 48

Economic and Social Council

} Rev.1/Add.12/Rev.6/Amend.3

E/ECE/324/Rev.1/Add.15/Rev.8/Amend.4 E/ECE/TRANS/505/Rev.1/Add.15/Rev.8/Amend.4

Proposal for a new 07 series of amendments to Regulation No. 48 (Installation of lighting and light-signalling devices)

Informal document No. 5 (47th GRE, 1-5 October 2001, agenda item 5.8.)

Economic and Social Council

EU Work priorities for for UNECE activities. 1. Working Group on Automated and connected vehicles (GRVA)

Proposal for the 02 series of amendments to Phase 2 of Regulation No. 129 (Enhanced Child Restraint Systems)

E/ECE/324 AGREEMENT. Addendum 47: Regulation No. 48. Revision 4 - Amendment 1

E/ECE/324/Add.3/Rev.3 E/ECE/TRANS/505/Add.3/Rev.3

Economic and Social Council

Economic and Social Council

E/ECE/324/Rev.1/Add.43/Rev.3/Amend.7 E/ECE/TRANS/505/Rev.1/Add.43/Rev.3/Amend.7

STATUTORY INSTRUMENTS. S.I. No. 280 of 2017 EUROPEAN COMMUNITIES (ROAD VEHICLES: TYPE-APPROVAL) (AMENDMENT) REGULATIONS 2017

Economic and Social Council

SOUTH AFRICAN NATIONAL STANDARD

E/ECE/324/Rev.1/Add.47/Rev.7 E/ECE/TRANS/505/Rev.1/Add.47/Rev.7

E/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3

E/ECE/324/Rev.1/Add.47/Rev.12 E/ECE/TRANS/505/Rev.1/Add.47/Rev.12

DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICA'nONS ACT (Act 6 of 2008)

E/ECE/324/Rev.1/Add.57/Rev.2/Amend.4 E/ECE/TRANS/505/Rev.1/Add.57/Rev.2/Amend.4

EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL

COMMISSION REGULATION (EU) No /.. of XXX

Economic and Social Council

Date: 4 June 2009 (Thursday) 8:30 a.m. 5:00 p.m Place: LTO Bulwagan Edu, East Avenue, Quezon City, Philippines

AUTOMOTIVE INDUSTRY STANDARD PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B. NO. 832, PUNE

Regulation respecting low-speed vehicles. O.C , 4 July 2017

E/ECE/324/Rev.2/Add.112/Rev.3/Amend.6 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.6

Economic and Social Council

In the Motor Cycle Working Group of 17 December 2014 the European Commission has presented and made public two proposals:

Revised proposal to amend UN Global Technical Regulation No. 3 (Motorcycle brake systems) I. Statement of technical rationale and justification

E/ECE/324/Rev.1/Add.90/Rev.3 E/ECE/TRANS/505/Rev.1/Add.90/Rev.3

E/ECE/324/Rev.1/Add.78/Rev.2/Amend.3 E/ECE/TRANS/505/Rev.1/Add.78/Rev.2/Amend.3

Economic and Social Council

Economic and Social Council

Secretary-General of the European Commission, signed by Mr Jordi AYET PUIGARNAU, Director

E/ECE/324/Rev.2/Add.126/Rev.1/Amend.1 E/ECE/TRANS/505/Rev.2/Add.126/Rev.1/Amend.1

2014 Ram Federal/Canada Safety Standards

Legal instruments on the construction of vehicles

Transcription:

Transmitted by IWVTA IWG document WP.29-175-14(IWVTA-27-04) Draft Proposal for 01 series of to UN Regulation No.0 (International Whole Vehicle Type Approval) Annex 4 of UN Regulation No.0, amends to read; Annex 4 List of requirements for the purpose of IWVTA List of regulatory acts Part A: Requirements for vehicles of category M 1 Section I: List of requirements for U-IWVTA Version of UN Regulation Series of 2 1 Retro-reflecting devices for power-driven 2 Devices for the illumination of rear registration plates of power-driven vehicles and their trailers 3 Direction indicators for power-driven 4 Front and rear position lamps, stop-lamps and end-outline marker lamps for motor 5 Vehicles with regard to electromagnetic compatibility 6 Vehicles with regard to door latches and door retention components 7 Vehicles with regard to the protection of the driver against the steering mechanism in the event of impact 3 02 4 00 6 01 7 02 10 05 11 04 12 04 8 Brakes of M 1 and N 1 vehicles 13-H 01 9 Vehicles with regard to safety-belt anchorages 10 Safety-belts, restraint systems, child restraint systems and ISOFIX child restraint systems 11 Vehicles with regard to the seats, their anchorages and any head restraints 14 08 16 07 17 08 12 Power-driven vehicle front fog lamps 19 * 04 13 Vehicles with regard to their interior fittings 21 01 14 Reversing and maneuvering lamps for power-driven 23 00 1

Version of UN Regulation Series of 2 15 Vehicles with regard to their external projections 16 Audible warning devices and of motor vehicles with regard to their audible signals 17 Pneumatic tyres for motor vehicles and their trailers (Tyres should be type approved to UN Regulation No. 30 or UN Regulation No. 54.) 18 Vehicles with regard to the prevention of fire risks 19 Rear fog lamps for power-driven vehicles and their trailers 20 The speedometer and odometer equipment including installation 21 Safety glazing materials and their installation on vehicles 22 Restraining devices for child occupants of power-driven vehicles (only inasmuch as it relates to built-in vehicle booster cushions but not covering standalone child seats) 23 Headlamp cleaners, and of power-driven vehicles with regard to headlamp cleaners 24 Devices for indirect vision including installation 25 Installation of lighting and light-signaling devices 26 Motor vehicles having at least four wheels with regard to their sound emissions 27 Pneumatic tyres for commercial vehicles and their trailers (Tyres should be type approved to UN Regulation No. 30 or UN Regulation No. 54.) 28 Rear Underrun Protective Devices (RUPDs) and the installation of a RUPD of an approved type, Rear Underrun Protection (RUP) 26 03 28 00 30 02 34 03 38 00 39 01 43 01 44 * 04 45 * 01 46 04 48 06 51 03 54 00 58 03 29 A temporary-use spare unit, run-flat tyres 64 * 03 30 Parking lamps for power-driven vehicles 77 * 00 31 Vehicles with regard to steering equipment 79 03 32 Internal combustion engines or electric drive trains intended for the propulsion of motor vehicles of categories M and N with regard to the measurement of the net power and the maximum 30 minutes power of electric drive trains (Engine power) 33 Daytime running lamps for power-driven vehicles 85 00 87 00 2

Version of UN Regulation Series of 2 34 Side marker lamps for motor vehicles and their trailers 35 Protection of occupants in the event of a frontal collision 36 Protection of occupants in the event of a lateral collision 37 Motor vehicle headlamps equipped with gas-discharge light sources 38 Vehicles with regard to specific requirements for the electric power train 39 Motor vehicles headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps and/or LED modules 40 Tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance 91 * 00 94 03 95 03 98 * 01 100 * 02 112 * 01 117 02 41 Cornering lamps for power-driven vehicles 119 * 01 42 Vehicles with regard to the location and identification of hand controls, tell-tales and indicators 43 Adaptive Front-lighting Systems (AFS) for motor vehicles 44 Motor vehicles with regard to the forward field of vision of the motor vehicle driver 45 Motor vehicles with regard to their pedestrian safety performance 121 01 123 * 01 125 01 127 02 46 Brake assist systems 139 00 47 Electronic stability control systems 140 00 48 Tyre pressure monitoring systems 141 00 49 Tyre installation 142 00 1 If a UN Regulation number is followed by an asterisk " * " this indicates that the respective requirement applies only if the corresponding system is fitted to the vehicle. This then means that for the purpose of a U-IWVTA both vehicles with or without this system are acceptable. However, where the system is fitted to the vehicle, the requirement applies. The same also applies to systems not identified by * where it can be demonstrated that the corresponding requirements are to the IWVTA type 2 The entry is understood as the required minimum, i.e. including all supplements in force at the time the approval is issued. Approvals to any later versions have to be equally accepted in accordance with paragraph 13.3. of this Regulation. 3

Section II: Notification for L-IWVTA For notifications of Contracting Parties to the secretariat of the Administrative Committee in accordance with paragraph 13.5. of this Regulation, the form shown in Table 1 shall be used: Table 1 Notification of [Name of Contracting Party] Date to be effective [yyyy-mm-dd] 1 Retro-reflecting devices for power-driven vehicles and their trailers 2 Devices for the illumination of rear registration plates of power-driven 3 Direction indicators for power-driven 4 Front and rear position lamps, stop-lamps and end-outline marker lamps for motor vehicles and their trailers 5 Vehicles with regard to electromagnetic compatibility 6 Vehicles with regard to door latches and door retention components 7 Vehicles with regard to the protection of the driver against the steering mechanism in the event of impact 3 or later 4 or later 6 or later 7 or later 10 or later 11 or later 12 or later 8 Brakes of M 1 and N 1 vehicles 13-H or later 9 Vehicles with regard to safety-belt anchorages 10 Safety-belts, restraint systems, child restraint systems and ISOFIX child restraint systems 11 Vehicles with regard to the seats, their anchorages and any head restraints 14 or later 16 or later 17 or later 12 Power-driven vehicle front fog lamps 19 or later 13 Vehicles with regard to their interior fittings 14 Reversing and maneuvering lamps for power-driven vehicles and their trailers 15 Vehicles with regard to their external projections 16 Audible warning devices and of motor vehicles with regard to their audible signals 21 or later 23 or later 26 or later 28 or later 4

Notification of [Name of Contracting Party] Date to be effective [yyyy-mm-dd] 17 Pneumatic tyres for motor vehicles and their trailers (Tyres should be type approved to UN Regulation No. 30 or UN Regulation No. 54.) 18 Vehicles with regard to the prevention of fire risks 19 Rear fog lamps for power-driven 20 The speedometer and odometer equipment including installation 21 Safety glazing materials and their installation on vehicles 22 Restraining devices for child occupants of power-driven vehicles (only inasmuch as it relates to built-in vehicle booster cushions but not covering standalone child seats) 23 Headlamp cleaners, and of power-driven vehicles with regard to headlamp cleaners 24 Devices for indirect vision including installation 25 Installation of lighting and light-signaling devices 26 Motor vehicles having at least four wheels with regard to their sound emissions 27 Pneumatic tyres for commercial (Tyres should be type approved to UN Regulation No. 30 or UN Regulation No. 54.) 28 Rear Underrun Protective Devices (RUPDs) and the installation of a RUPD of an approved type 29 A temporary-use spare unit, run-flat tyres 30 Parking lamps for power-driven vehicles 31 Vehicles with regard to steering equipment 30 or later 34 or later 38 or later 39 or later 43 or later 44 or later 45 or later 46 or later 48 or later 51 or later 54 or later 58 or later 64 or later 77 or later 79 or later 5

Notification of [Name of Contracting Party] Date to be effective [yyyy-mm-dd] 32 Internal combustion engines or electric drive trains intended for the propulsion of motor vehicles of categories M and N with regard to the measurement of the net power and the maximum 30 minutes power of electric drive trains (Engine power) 33 Daytime running lamps for power-driven vehicles 34 Side marker lamps for motor vehicles and their trailers 35 Protection of occupants in the event of a frontal collision 36 Protection of occupants in the event of a lateral collision 37 Motor vehicle headlamps equipped with gas-discharge light sources 38 Vehicles with regard to specific requirements for the electric power train 39 Motor vehicles headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps and/or LED modules 40 Tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance 41 Cornering lamps for power-driven vehicles 42 Vehicles with regard to the location and identification of hand controls, tell-tales and indicators 43 Adaptive Front-lighting Systems (AFS) for motor vehicles 44 Motor vehicles with regard to the forward field of vision of the motor vehicle driver 45 Motor vehicles with regard to their pedestrian safety performance 85 or later 87 or later 91 or later 94 or later 95 or later 98 or later 100 or later 112 or later 117 or later 119 or later 121 or later 123 or later 125 or later 127 or later 46 Brake assist systems 139 or later 47 Electronic stability control systems 140 or later 48 Tyre pressure monitoring systems 141 or later 49 Tyre installation 142 or later 6

Notification of [Name of Contracting Party] Date to be effective [yyyy-mm-dd] 3 A notification is necessary only for those UN Regulations where an earlier version than that specified in Section I is also accepted. In accordance with paragraph 13.1. of this Regulation the latest version shall be accepted in any case. The entry "none" means that topic is not regulated by the Contracting Party and therefore compliance with the respective UN Regulations is not required. The entry "or later" has to be mentioned only if the Contracting Party also accepts approvals according to later versions of the UN Regulations than the version it has notified. In any case approvals according to the version specified in Section I of this annex as well as approvals to the latest version of the UN Regulations concerned have to be accepted in accordance with paragraphs 13.1. and 13.3. of this Regulation. Such versions therefore do not have to be mentioned with the entry "or later". Information about the minimum content of a L-IWVTA that will be accepted by a Contracting Party can be found in the status document ECE/TRANS/WP.29/343 as amended. 7