Sanitary Fittings & Tubing

anitary Fittgs & ubg pecifications anitary tubg is 3- approved taless steel sanitary tubg dimensions and materials conform to M 269/270 and 3- pproved taless steel plate flanges made from M 240 (Plate) or cast conformance with M 351 ndependent lab verification that fittgs meet applicable chemical & physical properties Material test reports available Manufacturg facility is O 9001:2008 logo, heat number & country of orig marked on every fittg

anitary Fittgs - Weld Ends Fig. 77L24 & 77L26 90 ube end (Long adius) ube O Part umber Packg 304 316/L nner Master 1 77L24010 77L26010 2.06 30 60 0.1 1-1/2 77L24014 77L26014 2.94 8 16 0.4 2 77L24020 77L26020 4.06 3 6 0.7 2-1/2 77L24024 77L26024 5.19-5 1.2 3 77L24030 77L26030 6.31-2 1.8 4 77L24040 77L26040 8.31-1 4.2 6 77L24060 77L26060 12.46-1 5.75 Fig. 772WL4 & 772WL6 90 ube end (hort adius) ube O Part umber Packg 304 316/L nner Master 1/2-772WL6004 1.13 200 800 0.05 3/4-772WL6006 1.13 100 400 0.07 1 772WL4010 772WL6010 1.50 24 96 0.1 1-1/2 772WL4014 772WL6014 2.25 6 24 0.3 2 772WL4020 772WL6020 3.00 6 12 0.5 2-1/2 772WL4024 772WL6024 3.75-5 0.8 3 772WL4030 772WL6030 4.50-4 1.2 4 772WL4040 772WL6040 6.00-2 2.6 6 772WL4060 772WL6060 9.00-1 2.0 Fig. 77L2K4 & 77L2K6 45 ube end (Long adius) ube O Part umber Packg 304 316/L nner Master 1/2-77L2K6004 2.25-1 0.1 3/4-77L2K6006 2.25-1 0.2 1 77L2K4010 77L2K6010 1.18 30 60 0.1 1-1/2 77L2K4014 77L2K6014 1.62 18 36 0.2 2 77L2K4020 77L2K6020 2.31 4 8 0.5 2-1/2 77L2K4024 77L2K6024 3.00 2 4 0.8 3 77L2K4030 77L2K6030 3.68 2 4 1.2 4 77L2K4040 77L2K6040 4.81-2 2.5 6-77L2K6060 6.22-1 4.0 Fig. 77L7W4 & 77L7W6 Long ee ube O Part umber Packg 304 316/L nner Master 1/2-77L7W6004 1.87 3.75 40 160 0.1 3/4-77L7W6006 2.00 4.00 15 60 0.2 1 77L7W4010 77L7W6010 1.87 3.75 12 48 0.1 1-1/2 77L7W4014 77L7W6014 2.25 4.50 8 16 0.3 2 77L7W4020 77L7W6020 3.00 6.00-8 0.6 2-1/2 77L7W4024 77L7W6024 3.00 6.00-5 0.7 3 77L7W4030 77L7W6030 3.25 6.50-3 1.0 4 77L7W4040 77L7W6040 3.87 7.75-1 2.4 6 77L7W4060 77L7W6060 5.63 11.25-1 4.8 3 imensions may change at any time due to contuous product development. MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

anitary Fittgs - Weld Ends Fig. 777W4 & 777W6 educg ee ube O Part umber Packg 304 316/L nner Master 3/4 x 1/2-777W6006004 2.13 2.13-1 0.1 1 x 1/2-777W6010004 2.13 2.13-1 0.1 1 x 3/4-777W6010006 2.13 2.13-1 0.2 1-1/2 x 1/2-777W6014004 2.25 2.37-1 0.3 1-1/2 x 3/4-777W6014006 2.25 2.37-1 0.3 1-1/2 x 1 777W4014010 777W6014010 1.65 1.37-1 0.3 2 x 1/2-777W6020004 3.00 2.38-1 0.6 2 x 3/4-777W6020006 3.00 2.38-1 0.6 2 x 1 777W4020010 777W6020010 2.06 1.63-1 0.6 2 x 1-1/2 777W4020014 777W6020014 2.06 1.91-1 0.6 2-1/2 x 1-1/2 777W4024014 777W6024014 2.34 2.16-1 0.6 2-1/2 x 2 777W4024020 777W6024020 2.34 2.31-1 0.7 3 x 1-1/2 777W4030014 777W6030014 2.59 2.41-1 1.0 3 x 2 777W4030020 777W6030020 2.59 2.56-1 1.0 3 x 2-1/2 777W4030024 777W6030024 2.59 2.59-1 1.0 4 x 1-1/2 777W4040014 777W6040014 3.44 2.91-1 2.4 4 x 2 777W4040020 777W6040020 3.44 3.06-1 2.4 4 x 2-1/2 777W4040024 777W6040024 3.44 3.09-1 2.4 4 x 3 777W4040030 777W6040030 3.44 3.09-1 2.4 6 x 3 777W4060030 777W6060030 6.30 4.87-1 4.8 6 x 4 777W4060040 777W6060040 6.30 4.87-1 4.8 Fig. 77L31W4 & 77L31W6 oncentric educer ube O Part umber Packg 304 316/L nner Master 3/4 x 1/2-77L31W6006004 1.00-1 0.05 1 x 3/4-77L31W6010006 2.00-1 0.5 1-1/2 x 1 77L31W4014010 77L31W6014010 2.00-1 0.1 2 x 1 77L31W4020010 77L31W6020010 2.00-1 0.5 2 x 1-1/2 77L31W4020014 77L31W6020014 2.00 10 40 0.3 2-1/2 x 1-1/2 77L31W4024014 77L31W6024014 4.00-1 0.3 2-1/2 x 2 77L31W4024020 77L31W6024020 2.00 10 40 0.2 3 x 1 77L31W4030010 77L31W4030010 8.00-1 0.8 3 x 1-1/2 77L31W4030014 77L31W6030014 6.00 1 4 0.8 3 x 2 77L31W4030020 77L31W6030020 4.00-1 0.6 3 x 2-1/2 77L31W4030024 77L31W6030024 2.00 4 16 0.3 4 x 1-1/2 77L31W4040014 77L31W6040014 10.00-1 1.9 4 x 2 77L31W4040020 77L31W6040020 8.00 2 4 1.4 4 x 2-1/2 77L31W4040024 77L31W6040024 6.00 2 4 1.1 4 x 3 77L31W4040030 77L31W6040030 4.00 2 4 0.6 6 x 3 77L31W4060030 77L31W6060030 5.50-1 1.6 6 x 4 77L31W4060040 77L31W6060040 5.50-1 1.2 Fig. 77L32W4 & 77L32W6 Eccentric educer ube O Part umber Packg 304 316/L nner Master 1-1/2 x 1 77L32W4014010 77L32W6014010 2.50 10 40 0.1 2 x 1-1/2 77L32W4020014 77L32W6020014 2.00 10 40 0.4 2-1/2 x 1-1/2 77L32W4024014 77L32W6024014 4.00 10 40 0.3 2-1/2 x 2 77L32W4024020 77L32W6024020 2.00 5 20 0.3 3 x 1 7732W4030010 7732W6030010 8.00-1 0.8 3 x 1-1/2 77L32W4030014 77L32W6030014 6.00 1 4 0.8 3 x 2-1/2 77L32W4030024 77L32W6030024 2.00 4 16 0.4 4 x 1-1/2 77L32W4040014 77L32W6040014 10.00 4 16 1.8 4 x 2 77L32W4040020 77L32W6040020 8.00 2 4 1.5 4 x 2-1/2 77L32W4040024 77L32W6040024 6.00 2 4 1.3 4 x 3 77L32W4040030 77L32W6040030 4.00 2 4 0.9 6 x 3 77L32W4060030 77L32W6060030 5.50-1 1.6 6 x 4 77L32W4060040 77L32W6060040 5.50-1 1.2 imensions may change at any time due to contuous product development. MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 4

anitary Fittgs - lamp End Fig. 772MP4 & 772MP6 90 Eow ube O Part umber Packg 304 316/L nner Master 1/2-772MP6004 1.62 25 100 0.2 3/4-772MP6006 1.62 25 100 0.2 1 772MP4010 772MP6010 2.00 14 28 0.3 1-1/2 772MP4014 772MP6014 2.75 8 16 0.4 2 772MP4020 772MP6020 3.50 4 8 0.8 2-1/2 772MP4024 772MP6024 4.25 2 4 1.0 3 772MP4030 772MP6030 5.00-4 2.0 4 772MP4040 772MP6040 6.62-1 3.6 6 772MP4060 772MP6060 10.00-1 3.4 Fig. 772KMP4 & 772KMP6 45 Eow ube O Part umber Packg 304 316/L nner Master 1/2-772KMP6004 0.97-1 0.2 3/4-772KMP6006 0.97-1 0.2 1 772KMP4010 772KMP6010 1.12-1 0.2 1-1/2 772KMP4014 772KMP6014 1.43-1 0.3 2 772KMP4020 772KMP6020 1.75-1 0.5 2-1/2 772KMP4024 772KMP6024 2.06-1 0.6 3 772KMP4030 772KMP6030 2.37-1 1.2 4 772KMP4040 772KMP6040 3.12-1 2.2 Fig. 777MP4 & 777MP6 ee ube O Part umber Packg 304 316/L nner Master 1/2-777MP6004 2.37 4.75 20 40 0.3 3/4-777MP6006 2.50 5.00 20 40 0.4 1 777MP4010 777MP6010 2.37 4.75 6 12 0.3 1-1/2 777MP4014 777MP6014 2.75 5.50 4 8 0.4 2 777MP4020 777MP6020 3.50 7.00-4 0.8 2-1/2 777MP4024 777MP6024 3.50 7.00-3 1.0 3 777MP4030 777MP6030 3.75 7.50-1 2.0 4 777MP4040 777MP6040 4.50 9.00-1 3.6 6 777MP4060 777MP6060 6.50 13.00-1 6.9 Fig. 777MP4 & 777MP6 educg ee ube O Part umber Packg 304 316/L nner Master 1 x 1/2-777MP6010004 2.62 5.25-1 0.5 1 x 3/4-777MP6010006 2.62 5.25-1 0.5 1-1/2 x 1 777MP4014010 777MP6014010 2.87 5.75-1 0.7 2 x 1 777MP4020010 777MP6020010 2.12 5.12-1 1.1 2 x 1-1/2 777MP4020014 777MP6020014 2.40 5.12-1 1.1 2-1/2 x 1-1/2 777MP4024014 777MP6024014 3.25 7.00-1 1.3 2-1/2 x 2 777MP4024020 777MP6024020 2.81 5.69-1 1.4 3 x 1-1/2 777MP4030014 777MP6030014 2.90 6.19-1 1.7 3 x 2 777MP4030020 777MP6030020 3.06 6.19-1 1.7 3 x 2-1/2 777MP4030024 777MP6030024 3.09 6.19-1 1.8 4 x 1-1/2 777MP4040014 777MP6040014 3.40 8.12-1 3.2 4 x 2 777MP4040020 777MP6040020 3.56 8.12-1 3.2 4 x 2-1/2 777MP4040024 777MP6040024 3.59 8.12-1 3.5 4 x 3 777MP4040030 777MP6040030 3.66 8.12-1 3.5 5 imensions may change at any time due to contuous product development. MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

anitary Fittgs - lamp End imensions may change at any time due to contuous product development. Fig. 773114MP4 & 773114MP6 oncentric educer ube O Part umber Packg 304 316/L nner Master Fig. 7721MP4 & 7721MP6 Male dapter ube O Part umber Packg 304 316/L nner Master 1 x 3/4 7721MP4010006 7721MP6010006 2.19-1 0.8 1 x 1 7721MP4010010 7721MP6010010 2.25-1 0.8 1-1/2 x 1 7721MP4014010 7721MP6014010 2.44-1 0.8 1-1/2 x 1-1/2 7721MP4014014 7721MP6014014 2.25 8 32 0.8 1-1/2 x 2 7721MP4014020 7721MP6014020 2.62-1 1.6 2 x 2 7721MP4020020 7721MP6020020 2.64 3 12 1.4 2 x 1-1/2 7721MP4020014 7721MP6020014 2.63 2 8 1.0 3 x 1-1/2 7721MP4030014 7721MP6030014 3.00-1 2.3 3 x 2 7721MP4030020 7721MP6030020 3.00-1 2.3 3 x 2-1/2 7721MP4030024 7721MP6030024 3.00-1 2.4 3 x 3 7721MP4030030 7721MP6030030 3.00-1 2.4 4 x 3 7721MP4040030 7721MP6040030 3.81-1 3.4 4 x 4 7721MP4040040 7721MP6040040 3.16-1 3.5 Fig. 7722MP4 & 7722MP6 Female dapter ube O Part umber Packg 304 316/L nner Master 1 x 1/2 773114MP610004 2.00-1 0.3 1 x 3/4-773114MP610006 2.00 12 48 0.3 1-1/2 x 1 773114MP414010 773114MP614010 3.00-1 0.3 2 x 1 773114MP420010 773114MP620010 5.00 8 32 0.5 2 x 1-1/2 773114MP420014 773114MP620014 3.00 4 16 0.4 2-1/2 x 2 773114MP424020 773114MP624020 5.00 2 8 0.6 3 x 1-1/2 773114MP430014 773114MP630014 7.00 2 4 1.2 3 x 2 773114MP430020 773114MP630020 5.00 1 4 1.0 3 x 2-1/2 773114MP430024 773114MP630024 3.00 2 8 0.7 4 x 2 773114MP440020 773114MP640020 9.12 1 3 3.0 4 x 2-1/2 773114MP440024 773114MP640024 7.12 1 3 2.7 4 x 3 773114MP440030 773114MP640030 5.12 1 4 3.0 Fig. 773214MP4 & 773214MP6 Eccentric educer ube O Part umber Packg 304 316/L nner Master 2 x 1 773214MP420010 773214MP620010 5.00 4 16 0.4 2 x 1-1/2 773214MP420014 773214MP620014 3.00 4 16 0.4 2-1/2 x 1-1/2 773214MP424014 773214MP624014 5.00 2 8 0.5 2-1/2 x 2 773214MP424020 773214MP624020 3.00 2 8 0.5 3 x 1-1/2 773214MP430014 773214MP630014 7.00 2 4 1.2 3 x 2 773214MP430024 773214MP630020 5.00 4 8 1.0 3 x 2-1/2 773214MP430024 773214MP630024 3.00 2 8 0.7 4 x 2 773214MP440020 773214MP640020 9.12 1 3 3.0 4 x 2-1/2 773214MP440024 773214MP640024 7.12 1 3 2.7 4 x 3 773214MP440030 773214MP640030 5.12 1 4 3.0 1 x 3/4 7722MP4010006 7722MP6010006 1.63-1 0.6 1 x 1 7722MP4010010 7722MP6010010 1.63-1 0.7 1-1/2 x 1 7722MP4014010 7722MP6014010 2.25-1 1.0 1-1/2 x 1-1/2 7722MP4014014 7722MP6014014 2.25 8 32 0.8 1-1/2 x 2 7722MP4014020 7722MP6014020 2.25-1 1.0 2 x 1-1/2 7722MP4020014 7722MP6020014 2.35 2 8 0.8 2 x 2 7722MP4020020 7722MP6020020 2.40 8 32 1.3 3 x 1-1/2 7722MP4030014 7722MP6030014 2.19-1 2.5 3 x 2 7722MP4030020 7722MP6030020 2.19-1 2.6 3 x 2-1/2 7722MP4030024 7722MP6030024 2.19-1 2.6 3 x 3 7722MP4030030 7722MP6030030 2.19-1 2.7 4 x 3 7722MP4040030 7722MP6040030 2.19-1 5.0 4 x 4 7722MP4040040 7722MP6040040 3.65-1 5.0 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 6

anitary Fittgs - lamp End Fig. 7719W4 - Weld x Male P dapter ube O Part umber Packg 304 nner Master 1 7719W4010 0.87 1.00 1.75 1.00-1 0.2 1-1/2 7719W4014 1.37 1.50 1.75 1.50-1 0.2 2 7719W4020 1.87 2.00 1.81 2.00-1 0.3 2-1/2 7719W4024 2.37 2.50 2.31 2.50-1 1.0 3 7719W4030 2.87 3.00 2.50 3.00-1 1.7 4 7719W4040 3.83 4.00 2.56 4.00-1 2.5 Fig. 7714WMP4 & 7714WMP6 hort-weld Ferrule ube O Part umber Packg 304 316/L nner Master 1/2-7714WMP6004 0.50 0.37 0.50-1 0.03 3/4-7714WMP6006 0.50 0.62 0.75-1 0.03 1 7714WMP4010 7714WMP6010 0.50 0.87 1.00 45 180 0.1 1-1/2 7714WMP4014 7714WMP6014 0.50 1.37 1.50 40 160 0.1 2 7714WMP4020 7714WMP6020 0.50 1.87 2.00 20 80 0.1 2-1/2 7714WMP4024 7714WMP6024 0.50 2.37 2.50 15 60 0.1 3 7714WMP4030 7714WMP6030 0.50 2.87 3.00 10 40 0.2 4 7714WMP4040 7714WMP6040 0.62 3.83 4.00 10 20 0.3 Fig. 77L14M74 & 77L14M76 Long-Weld Ferrule ube O Part umber Packg 304 316/L nner Master 1/2-77L14M76004 1.12 0.37 0.50-1 0.05 3/4-77L14M76006 1.12 0.62 0.75-1 0.08 1 77L14M74010 77L14M76010 1.12 0.87 1.00 20 80 0.1 1-1/2 77L14M74014 77L14M76014 1.12 1.37 1.50 18 72 0.1 2 77L14M74020 77L14M76020 1.12 1.87 2.00 10 40 0.2 2-1/2 77L14M74024 77L14M76024 1.12 2.37 2.50 6 24 0.2 3 77L14M74030 77L14M76030 1.12 2.87 3.00 5 20 0.3 4 77L14M74040 77L14M76040 1.12 3.83 4.00 6 12 0.5 6 77L14M74060-1.12 5.78 6.00-1 1.1 8 77L14M74080-1.12 7.78 8.00-1 1.8 Fig. 7714MP4 & 7714MP6 ecessless Ferrule (oll-on) ube O Part umber Packg 304 316/L nner Master 1 7714MP4010 7714MP6010 0.75 1.00 30 120 0.1 1-1/2 7714MP4014 7714MP6014 1.12 1.50 20 80 0.1 2 7714MP4020 7714MP6020 1.31 2.00 8 32 0.2 2-1/2 7714MP4024 7714MP6024 1.37 2.50 5 20 0.3 3 7714MP4030 7714MP6030 1.43 3.00 4 16 0.4 4 7714MP4040 7714MP6040 1.50 4.00 4 8 0.7 7 F imensions may change at any time due to contuous product development. E Fig. 7714PF4 - hort Pla evel eat Ferrule ube O Part umber E F Packg 304 nner Master 1-1/2 7714PF4014 1.37 1.50 1.67 1.84 0.72-1 0.2 2 7714PF4020 1.87 2.00 2.19 2.37 0.75-1 0.3 3 7714PF4030 2.87 3.00 3.22 3.43 0.90-1 0.5 Fig. 77144 - Long Pla evel eat Ferrule ube O Part umber Packg 304 nner Master 1-1/2 77144014 1.50 1.37-1 0.3 2 77144020 1.50 1.87-1 0.4 3 77144030 1.75 2.87-1 0.6 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

anitary Fittgs - lamp End Fig. 7715F4 - hort hreaded evel eat Ferrule ube O Part umber Packg 304 nner Master 1-1/2 7715F4014 1.37 1.50 2.00 0.72-1 0.2 2 7715F4020 1.87 2.00 2.50 0.75-1 0.3 3 7715F4030 2.87 3.00 3.50 0.90-1 0.7 Fig. 77154 - Long hread evel eat Ferrule ube O Part umber Packg 304 nner Master 1-1/2 77154014 1.50 1.37-1 0.3 2 77154020 1.50 1.87-1 0.4 3 77154030 1.75 2.87-1 0.8 E Fig. 7714W4 - Male -le hort Weld Ferrule ube O Part umber E Packg 304 nner Master 1-1/2 7714W4014 1.37 1.51 1.74 1.99 0.94-1 0.2 2 7714W4020 1.87 2.01 2.24 2.64 1.03-1 0.3 3 7714W4030 2.87 3.01 3.30 3.87 1.22-1 0.7 E Fig. 7715W4 - Female -le hort Weld Ferrule ube O Part umber E Packg 304 nner Master 1-1/2 7715W4014 1.37 1.51 1.76 1.99 0.94-1 0.2 2 7715W4020 1.87 2.01 2.26 2.64 1.03-1 0.4 3 7715W4030 2.87 3.01 3.31 3.87 1.22-1 0.7 Fig. 7714WLMP4 - ank Weldg Ferrules (light duty) ube O Part umber Packg 304 nner Master 1 7714WLMP4010 1.37 1.68 1.99 3.00-1 0.3 1-1/2 7714WLMP4014 1.87 2.19 2.52 3.00-1 0.4 2 7714WLMP4020 2.87 3.22 3.58 3.00-1 0.6 Fig. 7714MPW6 - Heavy ank Weld Ferrule ube O Part umber Packg 316/L nner Master 1 7714MPW6010 1.37 1.68 1.99 1.625-1 0.3 1-1/2 7714MPW6014 1.87 2.19 2.52 1.625-1 0.4 2 7714MPW6020 2.87 3.22 3.58 1.75-1 0.6 imensions may change at any time due to contuous product development. Fig. 7716MP4 & 7716MP6 olid End ap ube O Part umber Packg 304 316/L nner Master 1/2 & 3/4-7716MP6006 0.98 0.18 70 280 0.03 1 &1-1/2 7716MP4014 7716MP6014 1.98 0.25 70 280 0.1 2 7716MP4020 7716MP6020 2.51 0.25 30 120 0.3 2-1/2 7716MP4024 7716MP6024 3.04 0.25 20 80 0.4 3 7716MP4030 7716MP6030 3.57 0.25 10 40 0.9 4 7716MP4040 7716MP6040 4.68 0.31 8 16 1.2 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 8

anitary Fittgs - lamp End Fig. 7714MPH4 - ubber Hose dapter ube O Part umber Packg 304 nner Master 1 7714MPH4010 0.81 1.00 1.99 1.69-1 0.2 1-1/2 7714MPH4014 1.31 1.50 1.99 1.69-1 0.2 2 7714MPH4020 1.81 2.00 2.52 2.31-1 0.4 Fig. 7714MPH6 - ygon Hose dapter ube O Part umber Packg 316L nner Master 1 7714MPH6010 0.81 1.00 1.99 4.50-1 0.2 1-1/2 7714MPH6014 1.31 1.50 1.99 4.50-1 0.2 2 7714MPH6020 1.81 2.00 2.52 4.50-1 0.4 Fig. 7713H4 - evel eat Hex ut ube O Part umber Packg 304 nner Master 1-1/2 7713H4014 1.70 2.00 2.40 0.97-1 0.5 2 7713H4020 2.20 2.50 3.00 1.06-1 0.8 3 7713H4030 3.25 3.62 4.19 1.28-1 1.9 Fig. 7713MHHM4 Heavy uty lamp ube O Part umber Packg 304 nner Master 1/2 & 3/4 7713MHHM4006 1.10 25 100 0.2 1 & 1-1/2 7713MHHM4014 2.12 10 40 0.6 2 7713MHHM4020 2.65 10 40 0.7 2-1/2 7713MHHM4024 3.18 14 28 0.8 3 7713MHHM4030 3.71 12 24 1.0 4 7713MHHM4040 4.82 5 10 1.2 6 7713MHHM4060 6.69-1 3.7 8 7713MHHM4080 8.66-1 3.1 Fig. 77134 - Heavy uty -le lamp ube O Part umber Packg 304 nner Master 1-1/2 77134014 2.10 3.30-1 0.5 2 77134020 2.84 4.37-1 0.8 3 77134030 4.03 5.36-1 1.9 imensions may change at any time due to contuous product development. Fig. 7713MHP4 - High Pressure lamp ube O Part umber Packg 304 nner Master 1-1/2 7713MHP4014 1.71 2.05-1 1.0 2 7713MHP4020 2.22 2.58-1 1.2 2.5 7713MHP4024 2.74 3.11-1 1.3 3 7713MHP4030 3.05 3.64-1 1.5 4 7713MHP4040 4.29 4.04-1 1.8 6 7713MHP4060 6.22 6.69-1 2.8 9 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

anitary Fittgs - ight-glass lamp End ize: 1-1/2 to 4 ody: Mached 316 staless steel Ends: 3 clamp ends Max Pressure 150 psi at ambient temperature eals: EPM standard, silicon & viton available upon request oltg: taless steel G E F L Fig. 7754MP6 - ight-glass ube O Part umber E F G L Packg 316/L nner Master 1-1/2 7754MP6014 1.51 2.00 3.35 1.34 1.57 3.15 3.54 5.75-1 2.4 2 7754MP6020 1.87 2.52 4.13 1.96 2.36 3.15 3.54 5.90-1 2.5 3 7754MP6030 2.87 3.58 4.92 2.97 3.35 3.15 3.54 6.14-1 4.4 4 7754MP6040 3.84 4.68 6.18 3.94 4.33 3.15 3.54 6.14-1 7.0 imensions may change at any time due to contuous product development. MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 10

anitary Fittgs - Gaskets, ube Hangers, ubg, and Plate Flanges EPM & una- PFE Fig. 7740MPE, 7740MPG & 7740MPU Gaskets EPM Gasket* PFE Gasket ize Part umber Part umber -55 F to 275 F -40 F to 450 F U- Gasket Part umber -30 F to 200 F 1/2 7740MPE004 7740MPG004 7740MPU004 3/4 7740MPE006 7740MPG006 7740MPU006 1 7740MPE010 7740MPG010 7740MPU010 1-1/2 7740MPE014 7740MPG014 7740MPU014 2 7740MPE020 7740MPG020 7740MPU020 2-1/2 7740MPE024 7740MPG024 7740MPU024 3 7740MPE030 7740MPG030 7740MPU030 4 7740MPE040 7740MPG040 7740MPU040 6 7740MPE060 7740MPG060 7740MPU060 *o not use with any hydrocarbons. Fig. 77H4P4 Hanger with leeves ube O Part umber 1 77H4P4010 3.42 1.45 0.4 1-1/2 77H4P4014 4.00 2.12 0.5 2 77H4P4020 4.50 2.50 0.5 2-1/2 77H4P4024 4.75 3.12 0.6 3 77H4P4030 5.50 3.75 0.7 4 77H4P4040 6.75 4.75 0.9 6 77H4P4060 8.00 5.75 1.9 Fig. 77H44 Hanger with Grommets ube O Part umber 1 77H44010 3.42 1.45 0.4 1-1/2 77H44014 4.00 2.12 0.5 2 77H44020 4.50 2.50 0.5 2-1/2 77H44024 4.75 3.12 0.6 3 77H44030 5.50 3.75 0.7 4 77H44040 6.75 4.75 0.9 6 77H44060 8.00 5.75 1.9 O Fig. 62P4 & 62P6 anitary ubg ube O Part umber Wall.. hickness 304 316/L ube Length ft / ft 1/2 62P46004 62P66004 0.065 0.370 20 0.3 3/4 62P46006 62P66006 0.065 0.620 20 0.5 1 62P46010 62P66010 0.065 0.870 20 0.6 1-1/2 62P46014 62P66014 0.065 1.370 20 0.9 2 62P46020 62P66020 0.065 1.870 20 1.3 2-1/2 62P46024 62P66024 0.065 2.370 20 1.6 3 62P46030 62P66030 0.065 2.870 20 2.0 4 62P48040 62P68040 0.083 3.834 20 3.4 6 62P49060 62P69060 0.109 5.782 20 5.3 ube Plate Flanges ube O Part umbers Outside nside umber olt Hole olt hickness ize iameter iameter of olt iameter ircle () 304 316 (O) () Holes 1 1414OP010 1416OP010 0.500 4.25 1.06 4 0.625 3.12 1.7 1-1/2 1414OP014 1416OP014 0.500 5.00 1.56 4 0.625 3.88 2.3 2 1414OP020 1416OP020 0.500 6.00 2.06 4 0.75 4.75 3.2 2-1/2 1414OP024 1416OP024 0.500 7.00 2.56 4 0.75 5.50 4.5 3 1414OP030 1416OP030 0.500 7.50 3.06 4 0.75 6.00 4.8 4 1414OP040 1416OP040 0.500 9.00 4.06 8 0.75 7.50 6.5 6 1414OP060 1416OP060 0.500 11.00 6.06 8 0.875 9.50 8.2 8 1414OP080 1416OP080 0.500 13.50 8.06 8 0.875 11.75 11.8 10 1414OP100 1416OP100 0.500 16.00 10.06 12 1.00 14.25 14.7 12 1414OP120 1416OP120 0.500 19.00 12.06 12 1.00 17.00 21.4 11 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

eries 7745MP6 heck Valve ize: 1-1/2 to 4 Material: 316 staless steel Ends: lamp ends Max Pressure: 150 psi at ambient temperature ll wetted parts approved for use food processg ll wetted parts polished to 180 grit Optional ends: butt weld, butt weld extended, and male threads o. Part ame Material 1 hort ody 316 taless teel 2 Long ody 316 taless teel 3 lamp 316 taless teel 4 13 PG 316 taless teel 5 eal-g EPM 6 prg 316 taless teel 7 Flow upport Plate 316 taless teel 8 isc 316 taless teel 5 8 6 3 7 2 1 4 omal rackg ube ize Part umber Pressure psi 1-1/2 7745MP6014 1.37 1.99 1.42 1.89 1.6 2.6 2 7745MP6020 1.87 2.52 1.42 1.89 0.6 3.1 3 7745MP6030 2.87 3.58 1.42 1.89 0.8 5.2 4 7745MP6040 3.84 4.69 1.85 2.13 0.9 10.4 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 12

harpe eries 15 anitary utterfly Valve Port: ube Port ize: 1 to 4 Material: 304 taless teel Ends: lamp Ends Pressure: 150 P emperature: 200 F 304 staless steel precision milled body harpe logo, material grade, size, heat number and country of orig engraved on each valve body isc fully mached and polished Pull handle 4 position, blue 12 position handle, staless steel 12 position handle Hygienic seatg design utomation available upon request L 3 2 1 E o. Part ame Material 1 Handle Plastic 2 Gripper taless teel 3 ody 304 4 isc 304 5 eat EPM 6 olt 304 omal ube ize Part umber E L 1 V154E21010 0.87 1.99 1.75 3.11 2.40 1-1/2 V154E21014 1.37 1.99 1.75 3.35 2.53 2 V154E21020 1.87 2.52 1.87 4.13 2.93 2-1/2 V154E21024 2.37 3.05 1.91 4.41 3.06 3 V154E21030 2.84 3.58 2.03 4.92 3.34 4 V154E21040 3.84 4.69 2.03 6.18 4.00 6 5 4 Part umber Listed is for 304 ody, EPM eat, ri lamp Ends, 25 Fish, and 12 Position Handle. Other configurations available upon request 13 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

harpe eries 66 all Valve o. Part ame Material 1 ody F8M 2 End ap F8M 3 all 316 4 eats FM 5 ody Gasket PFE 6 tem 316 7 Gland Packg PFE 8 Gland taless teel 9 Handle taless teel 10 tem Washer taless teel 11 tem ut taless teel 12 olts Washer taless teel 13 olts ut taless teel 14 olts taless teel 15 over P.V.. 16 hrust Washer PFE 17 elleville taless teel 18 Gland ut taless teel 19 Lock ab taless teel 20 top P taless teel E 20 17 K 8 7 16 P Port: Full ube Port ize: 1/2 to 4 Material: 316 taless teel Ends: lamp Ends, Extended utt Weld, hort utt Weld Pressure: 1000 P emperature: 450 F 3-Piece design High cycle stem design ntegral O 5211 mountg pad Lockable handle lever or oval handle Hygienic seatg design Live loaded stem packg low-out proof stem avity-filled seats available L 19 9 10 11 3 M 4 14 2 1 5 12 13 J 18 6 F H 15 omal ube ize Part umber E F H J K L M P 1/2 V6666ME004 0.96 3.50 0.75 0.98 1.14 2.44 1.00 0.22 4.92 M5 0.65 0.37 3/4 V6666ME006 1.05 4.00 0.75 0.98 1.20 2.50 1.00 0.22 4.92 M5 0.65 0.62 1 V6666ME010 1.54 4.50 1.71 2.00 1.50 2.96 1.16 0.30 5.71 M5 0.80 0.87 1-1/2 V6666ME014 2.13 5.50 1.71 2.00 1.91 3.38 1.39 0.34 7.48 M6 1.14 1.37 2 V6666ME020 2.65 6.25 2.2 2.52 2.24 3.77 1.39 0.34 7.48 M6 1.14 1.87 2-1/2 V6666ME024 3.20 6.50 3.04 3.05 3.32 5.87 1.95 0.55 9.84 M8 1.48 2.37 3 V6666ME030 3.97 10.50 3.28 3.57 3.78 6.37 1.98 0.55 9.84 M8 1.47 2.87 4 V6666ME040 4.74 12.50 4.34 4.68 4.58 7.36 2.83 0.75 11.33 M10 1.65 3.83 Part number listed is for configuration listed on this page with clamp ends. full listg of configurations can be found at www.sharpevalves.com MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 14

harpe eries 66 all Valve Port: Full ube Port ize: 1/2 to 4 Material: 316L taless teel Ends: ri-lamp Ends, Extended utt Weld, hort utt Weld Pressure: 1480 P emperature: 450 F 13 12 14 20 21 15 16 17 18 19 1 2 3 4 5 6 HLE FO ZE 2 1/2"-4" 11 F F 10 10 9 8 7 ØJ ØG ØH 3- Piece design High cycle stem packg Encapsulated body bolts ntegral O mountg pad Lockable, lever, extended or oval handle Hygienic seatg design low-out proof stem avity-filled seats available omal ube ize Part umber E F G H J 1/2 V6666ME004 3.50 1.26 0.97 1.76 5.53 0.80 0.95 0.37 3/4 V6666ME006 4.00 1.47 1.05 1.87 4.50 0.80 0.95 0.62 1 V6666ME010 4.50 1.48 1.54 2.40 5.75 1.72 1.98 0.87 1-1/2 V6666ME014 5.50 1.69 2.13 3.16 7.00 1.72 1.98 1.37 2 V6666ME020 6.91 2.13 2.65 3.35 7.00 2.22 2.52 1.87 2-1/2 V6666ME024 6.74 1.77 3.20 5.58 10.00 2.78 3.05 2.37 3 V6666ME030 6.75 1.39 3.97 7.25 13.80 3.28 3.58 2.87 4 V6666ME040 8.24 1.76 4.73 7.84 22.00 4.35 4.68 3.83 E o. Part ame Material 1 ody F3M 2 all 316L 3 eats FM 4 ody eals FM 5 ri-lamp Ends F3M 6 ody olts 316 7 eal Protector FM 8 hrust Washer FM 9 tem Packg FM 10 Lower Lock Latch taless teel 10 Lower Lock olt taless teel 11 Upper Lock Latch taless teel 12 tem 316L 13 Gland Packg taless teel 14 elleville Washer taless teel 15 Packg ut taless teel 16 Lock ab taless teel 17 tem ut taless teel 18 Lock Washer taless teel 19 Handle taless teel 20 Wrench lock taless teel 21 Hex head olt taless teel Part number listed is for configuration listed on this page with clamp ends. full listg of configurations and flow plans can be found at www.sharpevalves.com 15 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

harpe eries 88 iverter all Valve o. Part ame Material 1 ody F3M 2 ody olts taless teel 3 all F8M 4 eats PFE 5 ody eals PFE 6 ri-lamp End F3M 7 ody uts F8M 8 eal Protector PEEK 9 hrust Washer PEEK 10 tem Packg PFE 11 Lower Lock Latch taless teel 11 Lower Latch olt taless teel 12 Upper Latch olt taless teel 13 tem F8M 14 Gland Packg F8M 15 elleville Washer taless teel 16 Packg ut taless teel 17 Lock ab taless teel 18 tem ut taless teel 19 Lock Washer taless teel 20 Handle taless teel 21 top olt taless teel 22 Wrench lock taless teel 23 Hex Head olt taless teel Port: ube Full Port ize: 1/2 to 4 Material: 316L taless teel Ends: ri-lamp Ends, Extended utt Weld, hort utt Weld Pressure: 1480 P emperature: 450 F ME/PE - 2009 compliant 3- Piece design High cycle stem design Encapsulated body bolts Variety of seats, seals and aseptic end connections ntegral mountg pad Lockable, lever, extended or oval handle ll wetted parts polished to 14-18 Optional 8-10 electro polish Optional purge ports available omal ube ize Part umber E F G H J K 1/2 V8866EP11004 0.97 1.26 2.24 5.53 0.80 0.98 0.37 1.70 3/4 V8866EP21006 1.05 1.47 2.24 4.50 0.80 0.98 0.62 1.80 1 V8866EP21010 1.54 1.48 2.62 5.79 1.72 1.98 0.87 1.95 1-1/2 V8866EP21014 2.13 1.69 3.21 7.00 1.72 1.98 1.37 2.30 2 V8866EP21020 2.64 2.13 3.83 7.00 2.22 2.52 1.87 2.50 2-1/2 V8866EP21024 3.20 1.77 5.94 8.74 2.78 3.05 2.37 2.65 3 V8866EP21030 3.96 1.39 7.68 13.80 3.28 3.58 2.87 3.20 4 V8866EP21040 4.73 1.76 8.27 13.80 4.35 4.68 3.83 3.60 Part number listed is for configuration listed on this page with the addition of a L-Port 90 urn all and 240 Grit lamp Ends. full listg of configurations and flow plans can be found at www.sharpevalves.com MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 16

harpe eries 77 3-Way or 4-Way all Valve o. Part ame Material 1 ody F8M 2 ap F8M 3 all F8M 4 eats FM/FE 5 ody Gasket PFE 6 olt Washer taless teel 7 olt 2-70 8 Low hrust Washer 50% Powder / 50% PFE 9 ompression g 316 10 Upper hrust Washer FM1600 11 V-g tem Packg PFE 12 hrust Washer 50% Powder / 50% PFE 13 nti-tatic tem 276 ype 316 14 Gland taless teel 15 elleville Washer 301 16 olt ut taless teel 17 Handle taless teel 18 Handle leeve Vyl 19 Lock addle taless teel 20 riangle topper taless teel 21 top olt 2-70 /2 Ø Ø ØL 20 E Ø H 12 11 10 9 8 ize: Full Port 1/2 to 4 Material: 316 taless teel Ends: ri-lamp Ends, Extended utt Weld, hort utt Weld Pressure: 600 P emperature: 450 F ME 16.5 ME 16.11 4-eat design ouble stem seals; stem design runnion supported ball for 2 and larger O 5211 mountg pad, L, and double L balls Live loaded stem packg low-out proof stem J 13 19 ØK OL LE 16 HLE FO 1/2"-1" 20 17 15 14 G 17 HLE FO 1-1/2"-4" 19 F EF. 18 G 21 20 2 1 3 4 5 6 7 omal ube ize Part umber E F G H J K L 1/2 V7766M6G9004 5.39 0.37 0.80 0.98 1.45 3.23 4.50 1.66 2.48 1.65 0.24 3/4 V7766M6G9006 5.58 0.63 0.80 0.98 1.43 3.38 5.12 2.18 2.73 1.97 0.28 1 V7766M6G9010 6.20 0.87 1.71 1.99 1.52 3.86 5.12 2.18 3.15 1.97 0.28 1-1/2 V7766M6G9014 6.74 1.37 1.71 1.99 1.32 5.03 9.84 3.32 4.09 2.75 0.35 2 V7766M6G9020 7.30 1.87 1.87 2.52 1.50 5.43 9.84 3.57 4.29 4.29 0.35 2-1/2 V7766M6G9024 8.54 2.37 2.78 3.05 1.77 6.37 19.50 3.82 5.00 5.00 0.47 3 V7766M6G9030 9.54 2.87 3.28 3.58 1.75 7.23 19.50 4.25 6.03 6.03 0.47 4 V7766M6G9040 11.44 3.83 4.34 4.68 2.04 8.39 23.42 5.08 7.36 7.36 0.47 Part number listed is for configuration listed on this page with the addition of a L-Port 90 urn all and 240 Grit lamp Ends. full listg of configurations and flow plans can be found at www.sharpevalves.com 17 MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com

EOE EOE EOE EOE harpe eries 66 ank ottom Valve o. Part ame Material 1 ody F3M 2 Flush ottom Flange F3M 3 all 316L 4 eats FM 5 ody eals FM 6 ri-lamp Ends F3M 7 ody olts 316 8 eal Protector FM 9 hrust Washer FM 10 tem Packg PFE 11 Lower Lock Latch taless teel 11 Lower Lock olt taless teel 12 Upper Lock Latch taless teel 13 tem 316L 14 Gland Packg taless teel 15 elleville Washer taless teel 16 Packg ut taless teel 17 Lock ab taless teel 18 tem ut taless teel 19 Lock Washer taless teel 20 Handle taless teel 21 top olt taless teel 22 Wrench lock taless teel 23 Hex head olt taless teel 21 Port: Full ube Port ize: 1/2 to 4 Material: 316L taless teel Ends: ri-lamp Ends, Extended utt Weld, hort utt Weld Pressure: 1480 P emperature: 450 F 3-Piece design High cycle stem packg Encapsulated body bolts Variety of seats and seals ntegral O mountg pad Lockable, lever, extended or oval handle Hygienic seatg design low out proof stem Flush pad made from solid bar stock Optional purge ports available E ØK 2 14 13 22 23 16 17 15 1 3 4 5 6 7 18 19 20 F HLE FO ZE 2 1/2"-4" 12 10 9 8 F 11 11 ØJ ØG ØH omal ube ize Part umber E F G H J K 1/2 V6666EF006 3.02 1.26 0.97 0.79 1.76 5.53 0.80 0.95 0.37 3.74 3/4 V6666EF006 3.31 1.47 1.05 0.79 1.87 4.50 0.80 0.95 0.62 3.74 1 V6666EF006 3.80 1.48 1.54 0.79 2.40 5.75 1.72 1.98 0.87 3.84 1-1/2 V6666EF006 4.92 1.69 2.13 1.10 3.16 7.00 1.72 1.98 1.37 5.50 2 V6666EF006 5.88 2.13 2.65 1.10 3.35 7.00 2.22 2.52 1.87 5.50 2-1/2 V6666EF006 6.30 1.77 3.20 1.34 5.58 10.00 2.78 3.05 2.37 7.00 3 V6666EF006 7.05 1.39 3.97 1.69 7.25 13.80 3.28 3.58 2.87 10.00 4 V6666EF006 8.42 1.76 4.73 1.93 7.84 22.00 4.35 4.68 3.83 11.00 Part number listed is for configuration listed on this page with the addition of a L-Port 90 urn all and 240 Grit lamp Ends. full listg of configurations and flow plans can be found at www.sharpevalves.com MH-OOPE EOL OLL FEE (800)-766-0076 FX (323) 890-4456 www.smithcooper.com 18