Spare Parts Manual Agri-Spread Lime & Fertilizer Spreaders Chain Range Rev1_31.10.2013 2013 www.agrispread.com Issue 1
Manufacturing Plant and Head Office: Agri-Spread Running Gear Ltd Coolnaha Ballyhaunis Co. Mayo. Tel: 00353 (0)9496 31808 Fax: 00353 (0)9496 31525 Email: info@agrispread.com UK Office Agri-Spread Charlie Halliday Allendale Hexham Northumberland NE47 9PY Tel: (0044) (0)143 4683626 Fax: (0044) (0)143683340 Mobile: (0044) 07780928560 or (0044) 07967808285 Email: hallidaycw@aol.com Web: www.agrispread.com Find us on Facebook Search for Agrispread Disclaimer While every effort has been made in the production of this manual to ensure that the information contained herein is full and correct, Agrispread assumes no responsibility for errors or omissions. Agrispread reserves the right to modify the machinery and the technical data contained within the manual without prior notice. Further to this, Agrispread assumes no liability for any damages, which may result from the use of the information contained within this manual. Page 2
Contents Introduction... 1 Thank you... 1 Foreword... 1 How to Order... 1 Safety Issues... 1 Product Identification... 2 Machine Serial Numbers... 2 Location of Machine Serial Plate... 3 Spare Parts... 5 Table of Figures Figure 1: Flow Control Valve... 5 Figure 2: Double Acting Hydralic Gear Box Ram... 7 Figure 3: RDS Tachometer... 9 Figure 4: Dale Tachometer... 10 Figure 5: Handbrake... 11 Figure 6:700 Chain Front Adjuster... 12 Figure 7: 500 Chain Front Adjuster... 13 Figure 8: Rear Chain Drive... 14 Figure 9:45mm Gearbox Ext Shaft Two Types... 16 Figure 10: Land Driven Floor Gearbox... 17 Figure 11: Gearbox with Chains Labelled... 19 Figure 12: Gearbox with Sprockets Labelled... 20 Figure 13 : Gear Selector... 21 Figure 14: Driven Floor Gearbox Type 1... 22 Figure 16: Chain... 23 Figure 17: Floor Brushes... 24 Figure 18: Front Chain Idler Roller... 25 Figure 19: Rear Chain Idler Roller... 26 Figure 20: Axle & Wheel Assembly... 27 Figure 21: Top Half of Spinner... 30 Figure 22: Bottom Half of Spinner... 31 Figure 23: Stainless Deck... 33 Figure 24: Light Assembly... 35 Figure 25: Manual Headland Control Assembly... 36 Figure 26: Electronic Headland Control... 38 Figure 27: Hydraulic Clamps... 39 Figure 28: Hose Kit Assembly... 40 Figure 29: Draw Bar Shoe... 41 Figure 30: Wide Spinner Disks... 42 Figure 31: Standard Hitch 30 mm... 43 Figure 32: Swivel Hitch... 44 Figure 33: Back Door... 45 2013 www.agrispread.com Issue 1
Table of Tables Table 1: Flow Control Valve... 6 Table 2: Double Acting Hydralic Gear Box Ram... 8 Table 3: RDS Tachometer... 9 Table 4: Dale Tachometer... 10 Table 5: Handbrake... 11 Table 6: Chain Front Adjuster... 12 Table 7: Chain Front Adjuster... 13 Table 8: Rear Chain Drive... 15 Table 9: 45mm Gearbox Ext Shaft Two Types... 16 Table 10: Land Driven Floor Gearbox... 18 Table 11: Gearbox with Chains Labelled... 19 Table 12: Gearbox with Sprockets Labelled... 20 Table 13: Gear Selector... 21 Table 14: Driven Floor Gearbox Type 1... 22 Table 16: Chain... 23 Table 17: Floor Brushes... 24 Table 18: Front Chain Idler Roller... 25 Table 19: Rear Chain Idler Roller... 26 Table 20: Axle & Wheel Assembly... 28 Table 21: Spinner Assembly... 30 Table 22: Bottom Half of Spinner... 32 Table 23: Stainless Deck... 34 Table 24: Light Assembly... 35 Table 25: Manual Headland Control Assembly... 37 Table 26: Electronic Headland Control... 38 Table 27: Hydraulic Clamps... 39 Table 28: Hose Kit Assembly... 40 Table 29: Draw Bar Shoe... 41 Table 30: Wide Spinner Disks... 42 Table 31: Standard Hitch 30 mm... 43 Table 32: Swivel Hitch... 44 Table 33: Back Door... 45 Page 4
Introduction Thank you We appreciate having you as a customer and wish you many years of safe and satisfied use of your machine. Foreword Always state the machine model and year of manufacture when contacting our offices or your nearest dealer. How to Order Our professional sales team is ready to take your order or answer any queries you may have by phone, fax, or email.when ordering ensure you know the correct part number and Machine Model. Tel: 00353(0)949631808 Fax: 00353(0)949631525 Email: info@agrispread.com Our sales office is open during the following hours: Monday to Thursday: 09:00 to 13:00 and 14:00 to 17:00 GMT Friday: 09:00 to 13:00 and 14:00 to 16:00 GMT Safety Issues Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage. Page 1
Product Identification Machine Serial Numbers If you need to contact Agrispread or your Agrispread dealer for information on servicing or spare parts, always provide the product model and serial numbers. We suggest that you record your machine details below: Model No: Serial No: Date of Purchase: Dealer Name: Dealer Telephone: The serial plate is located on the front right hand side of the frame. Page 2
Location of Machine Serial Plate C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\As55 Assembly serial.slddrw Page 3
Page 4 To show that Agri-Spread products conform to all the European regulations, the CE-brand is printed on the Agri-Spread Identify plate.
Spare Parts Figure 1: Flow Control Valve C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Flow Rate Controll Assembly.SLDDRW Page 5
Table 1: Flow Control Valve ITEM NO. DESCRIPTION PART NUMBER QTY. 1 BRAND VALVE 1000-1009 1 2 1/2" HYDRAULIC HOSE WITH 90⁰ SWEPT BEND FITTING 1025-0114 2 3 3/4" T PIECE MALE MALE FEMALE FITTING 4 1/2" BSP-3/4" NPT MALE FITTING 5 3/4" HYDRAULIC HOSE WITH 90⁰ SWEPT BEND FITTING 6 3/4" HYDRAULIC HOSE WITH STRAIGHT FITTING 1025-0113 1 1025-0112 2 1025-0117 1 1025-0115 1 7 BRAND THUMB SCREW 1000-1536 1 8 1/2" BSP-1/2" NPT 1025-0116 1 MALE FITTING Page 6
Figure 2: Double Acting Hydralic Gear Box Ram C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Jockey Wheel hydralic ram.slddrw Page 7
Table 2: Double Acting Hydralic Gear Box Ram ITEM NO. DESCRIPTION PART NUMBER QTY. 1 DOUBLE ACTING HYDRALIC GEAR 1000-1171 1 BOX RAM 2 RIGHT GEAR BOX RAM MOUNT 1000-1538 1 3 LEFT GEAR BOX RAM MOUNT 1000-1539 1 4 M12 NYLON NUT STAINLESS 1023-0381 1 5 M12 X 50 BOLT STAINLESS 1023-0306 1 6 1/4" HYDRALIC HOSE WITH 90⁰ SWEPT BEND 1025-0119 2 7 3/8" - 1/4" M/M STAINLESS 1025-0110 2 8 M12 FLAT WASHER STAINLESS 1023-0375 2 9 3/8" DOWTY WASHER 1025-0118 2 Page 8
Figure 3: RDS Tachometer C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\1000-1049.SLDDRW Table 3: RDS Tachometer ITEM NO. DESCRIPTION PART NUMBER QTY. 1 2 3 4 5 N/A N/A MALE ELECTRICAL CONNECTOR (RDS) 1000-1543 1 TACHOMETER SENSOR (RDS) 1000-1544 1 TACHOMETER DISPLAY(RDS) 1000-1545 1 FEMALE ELECTRICAL CONNECTOR(RDS) 1000-1546 1 POWER CONNECTOR(RDS) 1000-1553 1 LOOM COMPLETE (RDS) 1000-1648 1 TACHOMETER RDS COMPLETE 1000-1049 1 Page 9
Figure 4: Dale Tachometer C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\1000-1048.SLDDRW Table 4: Dale Tachometer ITEM NO. DESCRIPTION PART NUMBER QTY. 1 2 3 4 5 6 N/A N/A 6 PIN DISPLAY CONNECTION(DALE S) 1000-1548 1 MOUNTING BRACKET(DALES) 1000-1549 1 TACHOMETER DIGITAL DISPLAY(DALES) 1000-1550 1 M6 WING NUT STAINLESS 1023-0063 2 TACHOMETER SENSOR(DALES) 1000-1552 1 POWER CONNECTOR(DALES) 1000-1553 1 LOOM COMPLETE (DALES ) 1000-1649 1 TACHOMETER (DALES COMPLETE ) 1000-1048 1 Page 10
Figure 5: Handbrake Table 5: Handbrake (pack ANd GO)\Hand Brake.SLDDRW \Desktop\As55 ITEM NO. DESCRIPTION PART NUMBER QTY. 1 COMPLETE 1000-1164 1 HANDBRAKE Page 11
Figure 6:700 Chain Front Adjuster Table 6: 700 Chain Front Adjuster ITEM DESCRIPTION NO. 1 M20 THREADED BAR STAINLESS PART QTY. NUMBER 1023-0702 1 2 M20 HEX NUT STAINLESS 1023-0697 1 3 FRONT ADJUSTER SPRING 1000-1668 1 STAINLESS 4 CHAIN FRONT ADJUSTER BOX 5 M20 FLAT WASHER STAINLESS 1000-1669 1 1023-0692 1 Note: Please specify when ordering front adjuster whether a left or a right adjuster is required.see Figure A below for orientation of machine. Page 12
Figure A : Oriation of Machine Figure 7: 500 Chain Front Adjuster Table 7: 700 Chain Front Adjuster ITEM NO. DESCRIPTION PART NUMBER QTY. 1 AS35-C Front Adjuster 1000-1691 1 Note: Please specify when ordering front adjuster whether a left or a right adjuster is required.see Figure A above for orientation of machine. Page 13
Figure 8: Rear Chain Drive Page 14
Table 8: Rear Chain Drive ITEM NO. DESCRIPTION PART NUMBER QTY. 1 MAIN REAR CHAIN 1000-1670 1 COUPLING 2 45MM GEARBOX EXT SHAFT ROGELBERG CHAIN MACHINE 1000-1671 1 3 678BLT60 1000-1672 6 4 M10 FLAT WASHER 1023-0269 48 STAINLESS 5 M10 HEX NUT STAINLESS 6 M10 X 35 SET STAINLESS 7 REAR CHAIN DRIVE SHAFT 8 M10 X 16 GRUB SCREWS 9 REAR CHAIN DRIVE KEY 10 M12 HEX NUT STAINLESS 11 M12 X 110 BOLT STAINLESS 1023-0274 19 1023-0199 18 1000-1673 1 1023-0175 2 1000-1674 1 1023-0380 6 1023-0343 6 12 FC212 1000-1680 2 12A FC209 1000-1681 Note: There are two types of 45mm Gearbox ext. shafts available ensure when ordering that you have correct type to suit the different type of gearboxes available. Page 15
Figure 9:45mm Gearbox Ext Shaft Two Types Table 9: 45mm Gearbox Ext Shaft Two Types ITEM NO. DESCRIPTION PART NUMBER QTY. 2 45MM GEARBOX EXT SHAFT ROGELBERG CHAIN MACHINE 1000-1671 1 2A 45MM GEARBOX EXTENSION SHAFT 1000-1052 1 Page 16
Figure 10: Land Driven Floor Gearbox C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\gear box 2.SLDDRW Page 17
Table 10: Land Driven Floor Gearbox ITEM NO. DESCRIPTION PART NUMBER QTY. 1 JOCKEY WHEEL 1000-1143 1 2 R CLIP 1000-1592 1 3 20 MM ID WASHER 1000-1593 2 4 5 30 MM 4 BOLT SELF-LUBE UNIT. (UCFC206FS) 1000-1077 2 25 MM 4 BOLT SELF LUBE UNIT (UCFC205FS) 1000-1076 4 6 45MM 4 BOLT SELF LUBE UNIT(UCFC209FS) 1000-1075 2 7 GEARBOX ACCESS PLATE 1000-1595 1 8 JOCKEY WHEEL COUPLING N/A 1 9 JOCKEY WHEEL BOSS 1000-1057 1 10 45MM GEARBOX EXTENSION SHAFT 1000-1052 1 11 EXTENSION SHAFT COUPLING 1000-1056 1 12 12 X 12 MM SHAFT KEY 1000-1658 1 Page 18
Figure 11: Gearbox with Chains Labelled Table 11: Gearbox with Chains Labelled ITEM NO. DESCRIPTION PART NUMBER QTY. 1 OUTPUT DUPLEX CHAIN 1000-1069 1 2 ASA50 CHAIN 1000-1070 1 3 ASA40 CHAIN INC. 2 OFFSET ENDLESS- 1000-1073 1 4 ASA50 CHAIN ENDLESS 1000-1071 1 5 ASA40 CHAIN ENDLESS 1000-1072 1 Page 19
Figure 12: Gearbox with Sprockets Labelled C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\gearbox with sprockets labelled.slddrw Table 12: Gearbox with Sprockets Labelled ITEM NO. DESCRIPTION PART NUMBER QTY. 1 STANDARD BELT THIRD DRIVE 1000-1062 1 2 ASA50 Z=48. 1 OFF 1000-1067 1 3 STANDARD QUAD GROUP AS BELT 1000-1063 1 4 ASA40 Z=60. 1 OFF 1000-1065 1 5 ASA60 Z=38. 1 OFF 1000-1066 1 6 IDLER SHAFT 1000-1663 2 7 POLY PART D 1000-1023 2 8 SHIM 30 X 42 X 1.0 1000-1161 2 Page 20
Figure 13 : Gear Selector C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\gear selector shaft assembly.slddrw Table 13: Gear Selector ITEM NO. DESCRIPTION PART NUMBER QTY. 1 3MM R CLIP STAINLESS 1000-1198 1 2 SHIFTER SHAFT (GS-PRT-F SHAFT B) 1000-1055 1 3 GEAR SELECTOR (GS-PRT-D SHAFT) 1000-1053 1 4 GEAR SELECTOR KEY(GS-PRT-E) 1000-1054 1 5 M6 X 50 SOCKET CAP Z/P 1023-0018 1 6 CENTER GEAR (GS-PRT-B) 1000-1060 1 7 GS-PRT-C 1000-1061 1 8 GS-PRT-A 1000-1059 1 9 SELECTOR BEARING(6805RS) 1000-1657 1 10 619062RS BEARING 1000-1656 1 11 SELECTOR SPACER 1000-1058 1 12 SHIM 30 X 42 X 1.0 1000-1161 4 Page 21
Figure 14: Driven Floor Gearbox Type 1 Table 14: Driven Floor Gearbox Type 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 200CC MOTOR 1002-1014 1 2 RT200-45 GEARBOX 1000-1265 1 3 ADJUSTABLE STABILIZER BAR 1000-1683 1 Page 22
Figure 15: Chain Table 15: Chain ITEM NO. DESCRIPTION PART NUMBER 1 CHAIN SPLIT PIN 1000-1675 2 CHAIN LINK 1000-1676 3 730 PLASTIC FLOOR SECTION 1000-1684 Note: Chain Links are sold individually so please specify amount required also please quote the measurement A when ordering. If ordering plastic floor please also state dimensions required Page 23
Figure 16: Floor Brushes Table 16: Floor Brushes ITEM NO. PART NUMBER DESCRIPTION QTY. 1 FRONT FLOOR BRUSH 1000-1685 1 2 REAR FLOOR BRUSHES 1000-1686 2 Page 24
Figure 17: Front Chain Idler Roller Table 17: Front Chain Idler Roller ITEM NO. DESCRIPTION PART NUMBER 1 FRONT & REAR IDLER SHAFT 2 M6 STRAIGHT GREASE NIPPLE 2 OFF 1000-1677 1000-1223 3 POLY BUSHING 1000-1678 4 CHAIN SPREADER FRONT IDLER SHAFT ROLLER 1000-1679 Note: Please specify when ordering which machine model you have Page 25
Figure 18: Rear Chain Idler Roller Table 18: Rear Chain Idler Roller ITEM NO. PART NUMBER DESCRIPTION QTY. 1 M6 STRAIGHT GREASE NIPPLE 1000-1223 1 2 FRONT & REAR IDLER SHAFT 1000-1677 1 3 M8 STRAIGHT GREASE NIPPLE 2 OFF 1000-1223 1 4 POLY BUSHING 1000-1678 2 Note: Please specify when ordering which machine model you have Page 26
Figure 19: Axle & Wheel Assembly C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Wheels and Axle.SLDDRW Page 27
Table 19: Axle & Wheel Assembly ITEM NO. DESCRIPTION PART NUMBER QTY. 1 80 MM 2.0 M AXLE AS 55 1022-0002-A 1 2 550/60 22.5 8 STUD 1022-0012 2 3 3/8" DOWTY WASHER 1025-0118 1 4 3/8" - 1/2" M/M STAINLESS 1025-0120 1 5 BRAKE HOSE COMPLETE N/A 1 6 WIRE ROPE CLAMPS 1000-1221 6 7 8 MM WIRE ROPE 1000-1220 3 8 BRAKING SYSTEM 1000-1570 1 9 SPLINED BRAKE SHAFT 1000-1571 2 10 BRAKE RAM ON SPRINGS 1000-1172 1 1A 70 MM 2.0 M AXLE AS35 1022-000-A 1 1B 120 MM 1830 AXLE AS85/100 1022-0005 1 1C 150 SQUARE X 2.0 M AXLE (420 X 180 BRAKE) 1022-0008 1 1 1 Please ensure model number is checked before ordering axle Page 28
Spinner Assembly (illustration) C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Spinner Assembly.SLDDRW Page 29
Figure 20: Top Half of Spinner C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Spinner Assembly top half.slddrw Table 20: Spinner Assembly ITEM NO. DESCRIPTION PART NUMBER QTY. 1 20 MM NYLON FLANGE WATER JET 1000-1139 1 2 80CC MOTOR 1000-1008 1 3 M10 X 60 BOLT STAINLESS 1023-0221 2 4 M10 HEX NUT STAINLESS 1023-0274 2 5 M10 FLAT WASHER STAINLESS 1023-0269 4 6 1/4" EQUAL T FITTING 1025-0121 1 7 1/4"-1/4" M/F STAINLESS 1025-0126 1 8 SPINNER TUBE 1000-1186 1 Page 30
Figure 21: Bottom Half of Spinner C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Spinner Assembly 1st half.slddrw Page 31
Table 21: Bottom Half of Spinner ITEM NO. DESCRIPTION PART NUMBER QTY. 1 BOTTOM HALF OF COUPLING 1000-1583 1 2 PLASTIC COUPLING ELEMENT 1000-1582 1 3 M20 HEX NUT STAINLESS 1023-0697 1 4 M20 FLAT WASHER STAINLESS 1023-0692 1 5 TOP HALF OF COUPLING 1000-1581 1 6 M8 X 10 GRUB SCREW Z/P 1023-0170 2 7 8 MM OD X 50 MM ROLL PIN 1000-1580 1 8 INTERNAL CIRCLIP 1000-1082 1 9 OIL SEAL 1000-1081 1 10 SEAL SPACER BUSH 1000-1185 1 11 SHIM 30 X 42 X 1.0 1000-1161 1 12 4 FINGER DEFLECTOR 1000-1011 1 13 RDS TACHOMETER MAGNET 1000-1513 1 14 TACHOMETER SENSOR N/A 1 15 M10 HEX NUT STAINLESS 1023-0274 4 16 M10 FLAT WASHER STAINLESS 1023-0269 4 17 M10 X 40 BOLT STAINLESS 1023-0204 4 18 M10 PENNY WASHER STAINLESS 1023-0270 4 19 S/R D/G BALL BEARING 1000-1080 1 20 TAPERED ROLLER BEARING 1000-1079 1 21 SPINNER DISK RIGHT HAND 1000-1041 1 21 A SPINNER DISK LEFT HAND 1000-1040 23 SPINNER DISK CENTRES 1000-1039 1 24 SPINNER SHAFT COMPLETE WITH MAGNET 1000-1047 1 Page 32
Figure 22: Stainless Deck C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\stainless deck.slddrw Note: Stainless Deck may vary according to model. When order please ensure you specify which model machine you have. Page 33
Table 22: Stainless Deck ITEM NO. DESCRIPTION PART NUMBER QTY. 1 SIDE BELT DEFLECTOR (RIGHT) 1000-1130 1 1 A SIDE BELT DEFLECTOR (LEFT) 1000-1130-A 3 REAR CROSS BAR 1000-1102 1 4 V DEFLECTOR PLATE 1000-1132 2 5 DROP POINT ADJUSTER PLATE 1000-1123 2 6 CENTRE DIVIDER 1000-1131 1 7 REAR COVER 1000-1215 1 8 LEFT DEFLECTOR (CROSS BAR ) 1000-1108-A 1 9 RIGHT DEFLECTOR (CROSS BAR ) 1000-1108 1 10 OUTSIDE DEFLECTOR COMPLETE (LEFT) 1000-1140-A 1 11 OUTSIDE DEFLECTOR COMPLETE (RIGHT) 1000-1140 1 12 CENTRE V COMPLETE 1000-1150 1 13 35 MM 2 BOLT SELF LUBE UNIT(PINCH ROLLER BEARING ) 1000-1078 2 14 45MM 2 BOLT SELF LUBE UNIT 1000-1074 3 Page 34
Figure 23: Light Assembly C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\light assembly.slddrw Table 23: Light Assembly ITEM NO. DESCRIPTION PART NUMBER QTY. 1 LED LIGHT BRACKET 1000-1136 1 2 LED LIGHTS 1000-1180 1 C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\front cut out.slddrw Page 35
Figure 24: Manual Headland Control Assembly C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\hand land control assembly.slddrw Page 36
Table 24: Manual Headland Control Assembly ITEM NO. DESCRIPTION PART NUMBER QTY. 1 2 HEADLAND CONTROL VALVE 1000-1010 1 1/4 " HYDRAULIC HOSE 90⁰ WITH SWEPT ELBOW FITTING 1025-0125 1 3 1/2 " HYDRAULIC HOSE 90⁰ WITH SWEPT ELBOW FITTING 1025-0124 1 4 80CC MOTOR 1000-1008 1 5 1/4"-1/4" M/F STAINLESS 1025-0126 1 6 1/4" EQUAL T FITTING 1025-0121 1 7 1/2" M/F FITTING 1025-0131 2 8 9 1/2"-3/4" M/M STAINLESS 1025-0127 1 3/4 " HYDRAULIC HOSE WITH STRAIGHT FITTING 1025-0123 1 10 1/4 " HYDRAULIC HOSE WITH STRAIGHT FITTING 1025-0122 2 11 1/8"-1/4" M/M FITTING 1025-0128 1 12 1/2" DOWTY WASHER 1025-0129 4 13 1/2"-1/2" M/M STAINLESS 1025-0130 1 Page 37
Figure 25: Electronic Headland Control C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\electronic Headland Control Assembly.SLDDRW Table 25: Electronic Headland Control ITEM NO. DESCRIPTION PART NUMBER QTY. 1 2 3 ELECTRONIC HEADLAND CONTROL UNIT 1000-1616 1 ELECTRONIC HEADLAND CONTROL VALVE 1000-1617 1 ELECTRONIC HEADLAND CONTROL ELECTRICAL CONNECTOR 3 PIN 1000-1618 1 Page 38
Figure 26: Hydraulic Clamps Table 26: Hydraulic Clamps ITEM NO. DESCRIPTION PART NUMBER QTY. 1 1/2" SINGLE CLAMP. (22 MM HOSE CLAMP) 1000-1165 1 2 3/4" HOSE CLAMP. (30 MM HOSE CLAMP) 1000-1167 1 3 1/4" DOUBLE CLAMP. (15 MM HOSE CLAMP) 1000-1168 1 Page 39
Figure 27: Hose Kit Assembly C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack ANd GO)\Hose Kit Assmbly.SLDDRW Table 27: Hose Kit Assembly ITEM NO. DESCRIPTION PART NUMBER QTY. 1 HYDRAULIC FITTINGS HOLDER BIN MOUNT 1000-1601 1 2 HYDRAULIC FITTINGS HOLDER 1000-1602 1 3 HYDRAULIC FITTINGS HOLDER BRACKET 1000-1603 1 Page 40
Figure 28: Draw Bar Shoe C:\Users\RonanMcAndrew.RUNNINGGEARLTD.000\Desktop\As55 (pack And GO)\1000-1189.SLDDRW Table 28: Draw Bar Shoe ITEM NO. DESCRIPTION PART NUMBER QTY. 1 DRAWBAR SHOE PINS 1000-1190 2 2 LYNCH PINS 1000-1191 2 3 DRAWBAR SHOE 1000-1189 1 Page 41
Figure 29: Wide Spinner Disks Table 29: Wide Spinner Disks ITEM NO. DESCRIPTION PART NUMBER QTY. 1 1A 2 2A WIDE SPREAD DISKS LEFT HAND 1000-1043 1 WIDE SPREAD DISK RIGHT HAND 1000-1044 1 S/S WIDE SPREAD DISC FLIGHT RIGHT 1000-1141 5 S/S WIDE SPREAD DISC FLIGHT RIGHT 1000-1665 5 Page 42
Figure 30: Standard Hitch 30 mm Table 30: Standard Hitch 30 mm DESCRIPTION PART NUMBER QTY. STANDARD HITCH 30MM 1000-1246 1 Page 43
Figure 31: Swivel Hitch Table 31: Swivel Hitch DESCRIPTION PART NUMBER QTY. FABRICATED SWIVEL HITCH 1000-1667 1 Page 44
Figure 32: Back Door Table 32: Back Door ITEM NO. DESCRIPTION PART NUMBER QTY. 1 730 Back Door 1000-1688 1 2 Door Rail 1000-1689 2 3 500 Back Door 1000-1690 1 Page 45
Manufacturing Plant and Head Office Agri-Spread Running Gear Ltd Coolnaha Ballyhaunis Co. Mayo. UK Office Agri-Spread Allendale Hexham Northumberland NE47 9PY Tel: 00353 (0)9496 31808 Tel: (0044) (0)143 4683626 Fax: 00353 (0)9496 31525 Fax: (0044) (0)143683340 Email: info@agrispread.com Email: hallidaycw@aol.com