F-Series 10W PV Module SPM010P-F Solartech F-Series Modules Solartech photovoltaic F-Series Modules are constructed with high efficient polycrystalline solar cells and produce higher output per module than others in it class. This industrial grade module is an industry standard among various industry professionals. Features Accessible junction box with 4-1/2 knockout for ease of installation. (EVA) with TPT cushions the solar cells within the laminate an ensures the operating characteristics of the solar cells under virtually any climatic condition Rigid anodized aluminum frame and low iron tempered glass Easily accessible grounding points on all four corners for fast installation Proven junction box technology Reliability Proven superior field performance Tight power tolerance Qualifications and Certifications Applications Traffic & Safety Federal Government Oil & Gas Security Telecommunications Water and Wastewater Weather & Environmental Monitoring RV Camper Emergency Power Telemetry SCADA, RTU, GPS Marine Area Lighting & Sign
Model Number SPM010P-F Electrical Max power(pm) 10W Maximum power voltage(vpm) 17.3V Maximum power current (Ipm) 0.59A Short circuit current (Isc) 0.64A Open circuit voltage (Voc) 21.8V Module efficiency 10.0% Tolerance ±5% Mechanical Construction Solar Cells Front Cover Encapsulant Back Cover Frame Junction Box Tempered glass, silicon cell, EVA, Polyester with Tedlar 36 cells (156mm x 26mm) in a 2x18 matrix connected in series High transmission 3.2mm(1/8 ) glass EVA(Double layers) White polyester Anodized aluminum IP65, UL94-5VA material Nominal Voltage 12V Diodes Schottky by-pass diodes Temperature coefficient of Voc -0.36%/K Terminal Accept 8-14 AWG wire Temperature coefficient of Pm -0.46%/K Dimensions 13.8in(351mm)x11.8in(300mm)x1.38in(35mm) Temperature coefficient of Isc 0.05%/K Weight 8.8lb (4.0kg) NOCT 48 ±2 Operating Temperature -40 ~90 Maximum series fuse rating Maximum system voltage 10A 600V Storage Humidity <90% 351(13.8in) IV IV Curves 300(11.8in) Warranty 25-year limited warranty of 80% power output; 12 year limited warranty of 90% power output; 2-year limited warranty of materials and worksmanship* Certifications UL 1703 certification ETL Class I,Division 2,Groups C and D certification
F-Series 20W PV Module SPM020P-F Solartech F-Series Modules Solartech photovoltaic F-Series Modules are constructed with high efficient polycrystalline solar cells and produce higher output per module than others in it class. This industrial grade module is an industry standard among various industry professionals. Features Accessible junction box with 4-1/2 knockout for ease of installation. (EVA) with TPT cushions the solar cells within the laminate an ensures the operating characteristics of the solar cells under virtually any climatic condition Rigid anodized aluminum frame and low iron tempered glass Easily accessible grounding points on all four corners for fast installation Proven junction box technology Reliability Proven superior field performance Tight power tolerance Qualifications and Certifications Applications Traffic & Safety Federal Government Oil & Gas Security Telecommunications Water and Wastewater Weather & Environmental Monitoring RV Camper Emergency Power Telemetry SCADA, RTU, GPS Marine Area Lighting & Sign
Model Number SPM020P-F Electrical Max power(pm) 20W Maximum power voltage(vpm) 17.2V Maximum power current (Ipm) 1.17A Short circuit current (Isc) 1.25A Open circuit voltage (Voc) 21.7V Module efficiency 10.0% Tolerance ±5% Mechanical Construction Solar Cells Front Cover Encapsulant Back Cover Frame Junction Box Tempered glass, silicon cell, EVA, Polyester with Tedlar 36 cells (156mm x 26mm) in a 2x18 matrix connected in series High transmission 3.2mm(1/8 ) glass EVA(Double layers) White polyester Anodized aluminum IP65, UL94-5VA material Nominal Voltage 12V Diodes Schottky by-pass diodes Temperature coefficient of Voc -0.36%/K Terminal Accept 8-14 AWG wire Temperature coefficient of Pm -0.46%/K Dimensions 21.7in(550mm)x13.8in(350mm)x1.38in(35mm) Temperature coefficient of Isc 0.05%/K Weight 8.8lb (4.0kg) NOCT 48 ±2 Operating Temperature -40 ~90 Maximum series fuse rating Maximum system voltage 10A 600V Storage Humidity <90% IV IV Curves Warranty 25-year limited warranty of 80% power output; 12 year limited warranty of 90% power output; 2-year limited warranty of materials and worksmanship* Certifications UL 1703 certification ETL Class I,Division 2,Groups C and D certification
F-Series 30W PV Module SPM030P-F Solartech F-Series Modules Solartech photovoltaic F-Series Modules are constructed with high efficient polycrystalline solar cells and produce higher output per module than others in it class. This industrial grade module is an industry standard among various industry professionals. Features Class 1, Division 2, (C1D2) Group A,B,C and D Accessible junction box with 4-1/2" knockout for ease of installation. (EVA) with TPT cushions the solar cells within the laminate an ensures the operating characteristics of the solar cells under virtually any climatic condition Rigid anodized aluminum frame and low iron tempered glass Easily accessible grounding points on all four corners for fast installation Proven junction box technology Reliability Proven superior field performance Tight power tolerance Qualifications and Certifications Applications Traffic & Safety Federal Government Oil & Gas Security Telecommunications Water and Wastewater Weather & Environmental Monitoring RV Camper Emergency Power Telemetry SCADA, RTU, GPS Marine Area Lighting & Sign
Model Number SPM030P-F Electrical Max power(pm) 30W Maximum power voltage(vpm) 17.3V Maximum power current (Ipm) 1.77A Short circuit current (Isc) 1.93A Open circuit voltage (Voc) 21.9V Module efficiency 10.9% Tolerance ±5% Mechanical Construction Solar Cells Front Cover Encapsulant Back Cover Frame Junction Box Tempered glass, silicon cell, EVA, Polyester with Tedlar 36 cells (156mm x 39mm) in a 4x9 matrix connected in series High transmission 3.2mm(1/8 ) glass EVA(Double layers) White polyester Anodized aluminum IP65, UL94-5VA material Nominal Voltage 12V Diodes Schottky by-pass diodes Temperature coefficient of Voc -0.36%/K Terminal Accept 8-14 AWG wire Temperature coefficient of Pm -0.46%/K Dimensions 26.2in(666mm)x16.2in(412mm)x1.38in(35mm) Temperature coefficient of Isc 0.05%/K Weight 7.7 lbs NOCT 48 ±2 Operating Temperature -40 ~90 Maximum series fuse rating Maximum system voltage 10A 600V Storage Humidity <90% IV IV Curves Warranty 25-year limited warranty of 80% power output; 12 year limited warranty of 90% power output; 2-year limited warranty of materials and worksmanship* Certifications UL 1703 certification ETL Class I,Division 2,Groups A,B,C and D certification
F-Series 45W PV Module SPM045P-F Solartech F-Series Modules Solartech photovoltaic F-Series Modules are constructed with high efficient polycrystalline solar cells and produce higher output per module than others in it class. This industrial grade module is an industry standard among various industry professionals. Features Class 1, Division 2, (C1D2) Group A,B,C and D Accessible junction box with 4-1/2" knockout for ease of installation. (EVA) with TPT cushions the solar cells within the laminate an ensures the operating characteristics of the solar cells under virtually any climatic condition Rigid anodized aluminum frame and low iron tempered glass Easily accessible grounding points on all four corners for fast installation Proven junction box technology Reliability Proven superior field performance Tight power tolerance Qualifications and Certifications Applications Traffic & Safety Federal Government Oil & Gas Security Telecommunications Water and Wastewater Weather & Environmental Monitoring RV Camper Emergency Power Telemetry SCADA, RTU, GPS Marine Area Lighting & Sign
Model Number SPM045P-F Electrical Max power(pm) 45W Maximum power voltage(vpm) 18.3V Maximum power current (Ipm) 2.52A Short circuit current (Isc) 2.69A Open circuit voltage (Voc) 22.2V Module efficiency 13.1% Tolerance ±5% Mechanical Construction Solar Cells Front Cover Encapsulant Back Cover Frame Junction Box Tempered glass, silicon cell, EVA, Polyester with Tedlar 36 cells (156mm x 52mm) in a 4x9 matrix connected in series High transmission 3.2mm(1/8 ) glass EVA(Double layers) White polyester Anodized aluminum IP65, UL94-5VA material Nominal Voltage 12V Diodes Schottky by-pass diodes Temperature coefficient of Voc -0.36%/K Terminal Accept 8-14 AWG wire Temperature coefficient of Pm -0.46%/K Dimensions 26.2in(662mm)x21.1in(537mm)x1.38in(35mm) Temperature coefficient of Isc 0.05%/K Weight 11.0lb (5.0kg) NOCT 48 ±2 Operating Temperature -40 ~90 Maximum series fuse rating Maximum system voltage 12A 600V Storage Humidity <90% IV IV Curves Warranty 25-year limited warranty of 80% power output; 12 year limited warranty of 90% power output; 2-year limited warranty of materials and worksmanship* Certifications UL 1703 certification ETL Class I,Division 2,Groups A,B,C and D certification