Form No. 08 SPX Corporation 88 th Street Rockford, IL 09-99 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8 Fax: (800) 7-8 Order Entry: (800) 4-48 Fax: (800) 88-70 Parts List for: 89 009 MODEL F AIR HYDRAULIC PUMP Max. Capacity: 4,800 PSI SIDE VIEW 9, 0 8 4 7 No. No. Req d Description Litho in USA 04 4 Rd. Hd. Machine Screw (#0-4 UNC X /8 Lg.) 794 Pressure Gauge 07 Straight Fitting 4 08 Service Tee 0970 Pipe Plug Trade Name Decal 7 4084BK Shroud 8 47 Elbow 9 097 Hex Machine Screw Nut (#0-4 UNC) 0 08 Lockwasher (#0 External Tooth) Sheet No. of 09 Air Operated Valve 044 Connector Rev. 4 Date: Dec. 997
Parts List, Form No. 08, Back sheet of END VIEW MAIN AIR INTAKE 7 8 Rd. Hd. Machine Screw (#0-4 UNC X " Lg.) 47.80 ft. Tubing 00 0 Hex Washer Hd. Screw (#9- X " Lg.; Torque to /0 in. lbs.) * 8 Reservoir Gasket 4 Reservoir 7 0494 Decal Part numbers marked with an asterisk (*) are contained in Repair Kit No. 0089 for pump #89. Part numbers marked with a dagger ( ) are contained in Repair Kit No. 009 for pump #009.
Parts List Form No. 08 BASIC PUMP ASSEMBLY TOP & END VIEW "C" "C" 4 7, 8 Apply Permatex between gasket and coverplate. 0 9 Apply Loctite 77 or equivalent. SECTION C-C 409 Valve Body 88 Release Valve 4BK Cover Plate 4 477 Pump Body 748 4 Soc. Hd. Cap Screw (/4-0 UNC X -/" Lg.) Soc. Hd. Cap Screw (0-4 UNC X -/4" Lg.) 7 44 Soc. Hd. Cap Screw (0-4 UNC X / Lg.) 8 089 Washer (No. 0) 9 04 Sealing Washer 0 4 Filler Plug Adapter 07 Dipstick Assembly (Includes o-ring [Item #]) * 07 O-ring (/ X.44 X.087) Part numbers marked with an asterisk (*) are contained in Repair Kit No. 0089 for pump #89. Part numbers marked with a dagger ( ) are contained in Repair Kit No. 009 for pump #009. Sheet No. of Rev. 4 Date: Dec. 997
Parts List, Form No. 08, Back sheet of SIDE VIEW SEE DETAIL ON BACK SHEET OF "A" 8 4 7 9 0, 4, 7 8 9 4 0 44 4 4 4 9, 40 0 8 7 0 8 9 SEE DETAIL "B" 7 9 4 4 INTERNAL RETAINING RING DETAIL "B"
Parts List Form No. 08 04 Muffler * 89 Gasket 90 Piston Body 4 * 4 Piston Ring *8 O-ring (-/" X -/" X /) * 07 O-ring (" X /4 X /8) 7 477 Piston Release 8 * 0844 O-ring (-/" X 7/8 X /8; Apply Moly Kote) 9 * 07 O-ring (/4 X 9/ X /) 0 478 Check Valve Body * 088 Retaining Ring * 08 Filter Disc * O-ring (/8 X /4 X /; Urethane) 4 * 84 O-ring (-/8" x -/8" x /8) * 0 Gasket * 044 Plain Washer (/8 X /4 X /) 7 000 Soc. Hd. Cap Screw (/4-0 UNC X /8 Lg.; Torque to 90/0 in. lbs.) 8 * 044 Compression Spring (/ O.D. X /4 Lg.) 9 * 04 Steel Ball (9/ dia.) 0 78-48 Relief Valve (Set at 4,900/,00 PSI; Apply loctite 9 [Power Team #90] or equiv. & torque to 0/70 in. lbs.) *99 Cylinder (Torque to 90/00 ft. lbs. oiled; For 89) 440 Cylinder (Torque to 90/00 ft. lbs. oiled; For 009) * 0 Plain Washer (/4 X 9/ X /) 4800 Filter Adapter 4 478 Filter 48 Retaining Ring (Internal) * 0 Plain Washer (" X.7 X /) 7 *4 U-cup (For 89) 7 U-cup (For 009) 8 *04 Retainer (For 89) 74 Retainer (For 009) 9 *04 Retaining Ring (Note: Install with sharp edge toward the retained part. See Detail B on back of sheet of.) 0 * 749 Backup Washer (-/" X -/4" X.04) * 98 Compression Spring (.4 O.D. X 4-7/" Lg.) *8400 Piston (For 89) 7 Piston (For 009) *0 Bumper (For 89) 7 Bumper (For 009) 4 *08 Guide Spring (For 89) 70 Guide Spring (For 009) Air Cylinder (Note: Locate groove on upper half (top) of pump with chamfered tube end towards rear head as shown in illustration on back of sheet of.) * 9 Compression Spring (/ O.D. X -/" Lg.) 7 * 0 O-ring (.900 X.70 X.097) 8 047 Exhaust Valve Stem 9 * 04 Lockwasher (For #0 bolt) 40 04 Soc. Hd. Cap Screw (#0-4 X / Lg.; Torque to 0/ in. lbs.) 4 8 Piston End Plate 4 88 Piston Poppet 4 * 079 Compression Spring (.48 O.D. X.9 Lg.) 44 * 074 Hex Soc. Flat Hd. Cap Screw (8- UNC X /8 Lg.; Torque to /8 in. lbs.) 4 748 Rear Head Part numbers marked with an asterisk (*) are contained in Repair Kit No. 0089 for pump #89. Part numbers marked with a dagger ( ) are contained in Sheet No. of Repair Kit No. 009 for pump #009. Note: Shaded areas reflect last revision(s) made to this form. Rev. 4 Date: Dec. 997
Parts List, Form No. 08, Back sheet of DETAIL "A" 4 SEAT AT ASS'Y. 7 8 9 0 * 004 Foam Tube 87 Release Valve Button * 0 O-ring (/8 X /4 X /) 4 * 944 Compression Spring (/8 O.D. X / Lg.) 477 Poppet Retainer * 79 O-ring (/ X /8 X /) 7 97 Dowel Pin (Note: Place tapered end toward ball.) 8 907 Release Valve Poppet 9 * 444 Metallic Ball (/ Dia.) 0 097 Ball Retainer * 99 Compression Spring (/8 O.D. X / Lg.) Part numbers marked with an asterisk (*) are contained in Repair Kit No. 0089 for pump #89. Part numbers marked with a dagger ( ) are contained in Repair Kit No. 009 for pump #009. Refer to any operating instructions included with this product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected. Therefore: Use only genuine Hytec replacement parts! Additional questions can be directed to our Technical Services Department.