Outdoor Strip Light LFU Luci FLEX UQ IP67 Color management CIE - Intensive brightness 0 lm/m - Customizable length up to 0 ameter - Choice of back or straight cable feeding Back feed Straight feed
Outdoor Strip Light LFU Luci UQ FLEX IP67 NEW Robust dotless flexible linear light provides you an infinite imagination of facade lighting Victoria Theater Lighting design: Lighting Planners Associates Photo: Lighting Planners Associates 74 LFU Luci UQ FLEX IP67
Outdoor Strip Light LFU IP67 NEW Luci UQ FLEX IP67 - - - Back feed Straight feed Choice of mounting depends on installation area, For the high rise building For the place close to eye level For cove light 49 6 Back feed cable, tall rail and SUS clip Ideal for outdoor facade, Galaxis / Location: Singapore, Client: Ascendas Fusion 5, Architect & Interior Designer: Aedas, Lighting design: Light Cibles Outdoor indirect lighting, Indoor indirect lightinglighting. The city and Hudson / Lighting consultant: GREYMATTERS The above statements are only part of the cautions for outdoor use of the product. Contact a sales representative when you consider using the product outdoors. When the product is installed under any inappropriate condition, it is not covered by warranty. 5. Straight feed cable, short rail and polycarbonate clip 4.5 Straight feed cable and clip UQ FLEX IP67 Power FLEX EX IP65 Power FLEX IP65 Flat FLEX F IP65 FLEX α F IP65 Luci UQ FLEX IP67 LFU 75
Outdoor Strip Light LFU Luci UQ FLEX IP67 Color management MacAdam step NEW Model No. LFU-T Length Lead Wire Lead Wire Direction - Light source color -DF-O S W : One side lead wire : Both ends lead wire B S : Back feed : Straight feed Specification Model No. LFU-T0--DF-O Power consumption 5.8 W/m Fitting length(l) mm~0m Weight - Cuttable unit N/A Luminaire efficacy(700k) 65.5 lm/w Light source color D N W WW L L7 L4 L L9 7K 50K 40K K 00K 700K 400K K 900K Ra 84 Ra 8 Ra 80 Ra 80 = Device inventory* = Equivalent D : Daylight white N : Natural white W : White WW : Warm white K L : Warm white 00K L7 : Warm white 700K L4 : Warm white 400K L : Warm white K L9 : Warm white 900K = Please contact us since it is made-to-order products and has MOQ. 079 lm 060 lm 98 lm 954 lm Specification may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning. DF : Diffuser O : Outdoors Light Intensity LFU-T0**-L7-DF-O / illuminance angle 66 64 9 Luci Power FLEX EX IP65 5mm pitch (5.8 W/m) Corresponds to Length of Model No. and External dimensions 0 4 6 8 00 0 40 60 80 00 0 40 60 80 0400 400 4400 6400 8400 00 0 40 60 80 0600 600 4600 6600 8600 0700 700 4700 6700 8700 0800 800 4800 6800 8800 0900 900 4900 6900 8900 0 00 00 7000 9000 5 7 9 0 70 90 0 0 50 70 90 400 400 5400 7400 9400 0 50 70 90 600 600 5600 7600 9600 700 700 5700 7700 9700 800 800 5800 7800 9800 900 900 5900 7900 9900 00 4000 6000 8000 00M 7 0 0 0 8 4 (lx) m 0 General Specification Input voltage LED beam angle Environment Max. length per circuit Min. bending range Material (body) Attachments DC4V Outdoor, IP67 0m Rmm Silicon Mounting clip Option parts Mounting rail Mounting clip Hold Clip Certification Dimmable Power Supplies Power supply cable Required Joint cable External dimensions Both ends lead wire-back feed side view ± One side lead wire-straight feed side view 0 9 (0) ± One side lead wire-back feed side view ± ± Length + Length +9 (0) Prohibited installation places: - pooling water - liquids including chroline or chemicals fall on - high temperature and high humidity such as saunas - coastal areas which are affected by sea spray (0) Caution: Do not cut the LED fixture and the lead wire of outdoor product at a job site. Please do appropriate treatment for the lead wire and connector of the terminal of outdoor LED fixture. Both ends lead wire-straight feed side view ± (0) Length + (0) 9± Length +0 76 LFU Luci UQ FLEX IP67
Optional parts for straight Aluminum Mounting Rail A Type 9 for UQ FLEX H Model No : LFU-RL09-AL-A 5. Outdoor Strip Light 9± 0 0 LFU IP67 4. Number of holes : 4 6 for straight Aluminum Mounting Rail B Type 9 for UQ FLEX H40 Model No : LFU-RL09-AL-B 0 9± 0 49 4. 40 Number of holes : 4 9.5 for curved Mounthing Clip for UQ FLEX Model No : LFU-RC 5 pcs/ bag Attachment For curved installation 7 4.5 SUS hold clip A for UQ FLEX AL rail Model No : LFU-PT-A 5 pcs/ bag.8 8 5 White : - Black : + Screw hole :4.5 5.5 7.7 Power supply cable 0M for UQ FLEX Model No : CAD-V00M-FKNN-O 00± M 6 4.5.8 Connector cap is attached. 7 PC hold clip B for UQ FLEX AL rail Model No : LFU-PT-B 5 pcs/ bag 5. 5 4.7 Joint cable M for UQ FLEX Model No : CAD-0-MKFK-O 0±5 4.5 UQ FLEX IP67 Power FLEX EX IP65 Power FLEX IP65 Flat FLEX F IP65 FLEX α F IP65 Luci UQ FLEX IP67 LFU 77
Installing the product Installation with Mounting Clip Straight installation Fix the mounting clip by pcs of screws supplied by installer (Pan head screw M4 recommended). Attachment Mounthing Clip for UQ FLEX (LFU-RC) Curved installation UQ FLEX can be installed in curved surface as below picture. The minimum bending radius is mm. Rmm NG OK Do not bend the LED fixture to side direction. If bend it wrongly, FPC (flexible printed circuit board) will be damaged and the lighting fixture will not turn on. Mounting clips at both ends should be far from mm or more from the side cap. Keep the distance between mounting clips the same. (400 mm to 0 mm recommended) eq eq Length(mm) ~0 600~0 ~00 ~00 ~4000 4~00 5~6000 6~7000 7~8000 8~9000 9~0M Mounthing Clip for UQ FLEX 5 7 9 5 7 9 Ensure the pin holes in the connectors are positioned correctly before joining them. To fasten, rotate the metallic knobs until tightened Ensure the pin holes in the connector and cap are positioned correctly before joining them. To fasten, rotate the metallic knobs until tightened Do not twist the LED fixture as it will damage and break the FPC (flexible printed circuit board ) and Lighting fixture will not turn on. 78 LFU Luci UQ FLEX IP67
Installation with Mounting rail Fix the aluminum rail by screws supplied by installer (Pan head screw M4 recommended). Aluminum Mounting Rail A Type 9 for UQ FLEX H (LFU-RL09-AL-A) Outdoor Strip Light LFU IP67 Hold one side of the lighting fixture and push on the other side, the lamp will gradually enter the aluminum rail. Aluminum Mounting Rail B Type 9 for UQ FLEX H40 (LFU-RL09-AL-B) Do not bend the LED fixture to side direction. If bend it wrongly, FPC (flexible printed circuit board) will be damaged and the lighting fixture will not turn on. Push the SUS hold clip (LFU-PT-A) or PC hold clip (LFU-PT-B) until click sound and make sure it is securely locked. SUS hold clip is recommended in the environment where requires the durability. SUS hold clip A for UQ FLEX AL rail (LFU-PT-A) Length(mm) ~0 600~0 ~00 ~00 ~4000 4~00 5~6000 6~7000 7~8000 8~9000 9~0M SUS hold clip A for UQ FLEX AL rail PC hold clip B for UQ FLEX AL rail When using Aluminum rail B type (LFU-RL09-AL-B), the connector can be stored completely in the rail. Please seal the end connector with the connector cap. Aluminum rail cut eq PC hold clip B for UQ FLEX AL rail (LFU-PT-B) 5 7 9 5 7 9 The aluminium rail A type or B type (LFU-RL09-AL-A / LFU-RL09-AL-B) can be cut according to the length of lighting fixture. Aluminum rail mounting holes can also be made at the site by the installer. eq UQ FLEX IP67 Power FLEX EX IP65 Power FLEX IP65 Flat FLEX F IP65 FLEX α F IP65 Luci UQ FLEX IP67 LFU 79
Connecting to the power supply Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge. Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there.please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem. When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple. System configuration diagram When choosing power supply and planning wiring, the following conditions need to be fulfilled: Max. distance m LED fixture max. 0m Max.connectable length depends on the wattage of the power supply. 0m is the maximum length of Luci UQ FLEX per power supply. Max.length per circuit of Luci UQ FLEX is 0m. Power supply DC4V Circuit Circuit Max.distance from the power supply to the end of LED fixture is m including the length of the cable from the power supply, the cable attached with LED Max.length per circuit of Luci UQ FLEX is 0m. Circuit Power supply cable 0M for UQ FLEX (CAD-V00M-FKNN-O) Total 0m per power supply It is recommended to connect the LED fixture at a load ratio of 70%(without dimming) or 60%(with dimming) of the power output since the load varies depending on the derating and the usage environment of the power supply. Please confirm the table on the right for details. Length without dimming 70% loading factor power output with dimming 60% loading factor m W~ W~ m 4W~ 46W~ m 6W~ 69W~ 4m 84W~ 9W~ 5m 05W~ 5W~ 6m 6W~ 8W~ 7m 47W~ 6W~ 8m 68W~ 84W~ 9m 69W~ 7W~ 0m 0W~ W~ 80 LFU Luci UQ FLEX IP67
Direct horizontal surface light intensity distribution chart LFU-T0**-W-DF-O Light source color 40K Brightness cd Luminous flux 079 lm Color rendering index Ra 84 / illuminance angle 66 64 85 Recommendend dimensions and illumination distribuitions 0 5 5 5 5 Outdoor Strip Light LFU-T0**-L-DF-O Light source color 00K Brightness 4 cd Luminous flux 060 lm Color rendering index Ra 8 5 0 0 0 (lx) 4 m 0 / illuminance angle 66 64 4 78 4 0 0 0 9 4 (lx) m 0 0 40 6070 80 90 5 0 70 00 80 00 LFU IP67 LFU-T0**-L7-DF-O Light source color 700K Brightness 9 cd Luminous flux 98 lm Color rendering index Ra 80 / illuminance angle 66 64 9 7 Cove lighting CH=800 0 0 0 8 4 (lx) m 0 0 0 0 LFU-T0**-L4-DF-O Light source color 400K Brightness 8 cd Luminous flux 954 lm Color rendering index Ra 80 / illuminance angle 69 65 8 70 0 0 Distance from wall 0mm 0 0 0 7 4 (lx) m 0 mm mm mm 0mm 4000 80 0mm 800 UQ FLEX IP67 Power FLEX EX IP65 Power FLEX IP65 Flat FLEX F IP65 FLEX α F IP65 Luci UQ FLEX IP67 LFU 8