FUTV-13 Shown with some options Republic Machine Tool Co. Universal Horizontal Milling Machines Higher Standards for Demanding Applications
FU-EF Models: FU-13-EF / FU-152-EF / FU-185-EF Universal Horizontal Milling Machine Standard Equipment Swivel table ±45 Flood coolant system Low voltage control Pendant controls Variable feeds in 3 axis 3 axis rapid traverse Spindle brake Auto lube system Climb milling control Hardened and ground ways Different Styles of Vertical Head Available As An Option FU-152-EF Shown with some options Universal Head / Multi Angle Universal Milling Head MOD. FU-13-EF FU-152-EF FU-185-EF A 12 5/8 322 5/32 385 min B max 8 1/2 47 14 1/2 411 2 5 29 (725mm) 29 (57mm) 19 (475mm) 19 (475mm) 83 (299mm) 8 (223mm) Optional head for FU and FUTV models mounted on the end of the ram 2 (55mm) 2 (4mm) 15 (385mm) 13 (34mm) 79 (213mm) 72 (1825mm) 1 23 (59mm) 11 (273mm) 53 (1342mm) 95 (249mm) 76 (1938mm) 57 (1446mm) 59 (1492mm) 56 (141mm)
FUTV-EF Models: FUTV-13-EF / FUTV-152-EF Universal Horizontal Milling Machines With Turret Milling Head(standard) Standard Equipment: FUTV-13-EF / FUTV-152-EF Head swivel and tilt Swivel table ±45 Flood coolant systems Low voltage controls Variable feed in 3 axis. 3 axis simultaneous power feed with rapid traverse. Spindle brake. Auto lube system. Climb milling control. Hardened & Ground Ways. FUTV-13-EF FUTV-152-EF Horizontal Main Motor 5.5 HP(4.1 kw) 7.5 HP(3.7 kw) Spindle Nose Taper No. 4 Variable Hi/Low Horizontal Spindle Speed 35-1,899 RPM 35-1,8 RPM Vertical Spindle 5 HP Spindle Taper No. 4 Quill Maximum Travel 5 (127 mm) Variable Hi/Low Vertical Spindle Speed 6-4,2 RPM Net Weight 3,97 lbs.(1,8 kgs.) 5,73 lbs.(2,6 kgs.) Turret Milling Head With Built In Quill Feed Ram Mounted 14 (2,645mm) 1 (2,536mm) 7 (17mm) 25 (645mm) 6 (14mm) 24 (615mm) 5 (12mm) 36 (92mm) 7 (19mm) 35 (9mm) 5 (127mm) 59 (1492mm) 56 (141mm) Standard Head for FUTV-13-EF and 152-EF 5 HP Variable Speed w/ 4 Taper Spindle 2 (55mm) 2 (4mm) 15 (385mm) 13 (34mm) 79 (213mm) 72 (1825mm) 25 (625mm) 15 (37mm) 53 (1342mm) 95 (249mm) 76 (1938mm) 57 (1446mm) 2
FUTV-185-EF Universal Horizontal Milling Machine Standard Equipment: FUTV-185-EF Vertical spindle speeds 7-3,6 RPM on vertical head Vertical head 5 Hp Vertical swivels left to right 9 Horizontal spindle 12 speeds 4-18 RPM Swivel table ±45 Flood coolant system Low voltage controls Pendant controls Variable power feeds in 3 axis 3 axis rapid traverse Spindle brake Auto lube system Climb milling control Hardened and ground ways FUTV-185-EF Horizontal Main Motor 1 HP(7.45 kw) Spindle Nose Taper No. 4 / No. 5 Variable Hi/Low Horizontal Spindle Speed 35-1,899 RPM Vertical Spindle 5 HP Spindle Taper No. 4 Quill Maximum Travel 5.9 (15 mm) Variable Hi/Low Vertical Spindle Speed 7-3,6 RPM FU-185-EF Shown with some options Net Weight 3,97 lbs.(1,8 kgs.) 14 (2,645mm) 1 (2,536mm) 7 (17mm) 25 (645mm) 6 (14mm) 24 (615mm) 5 (12mm) 36 (92mm) 7 (19mm) 35 (9mm) 5 (127mm) 59 (1492mm) 56 (141mm) Standard Head for FUTV-152-EF 2 (55mm) 2 (4mm) 15 (385mm) 13 (34mm) 79 (213mm) 72 (1825mm) 25 (625mm) 15 (37mm) 53 (1342mm) 95 (249mm) 76 (1938mm) 57 (1446mm) 3
FCM-EF Models: FCM-152-EF / FCM-185-EF Universal Horizontal Milling Machine With Power Over Arm Spindle Standard Equipment: FCM-152-EF / FCM-185-EF Variable spindle speeds throughout Swivel table ±45 Flood coolant system Low voltage controls Pendant controls Variable feeds in 3 axis 3 axis rapid traverse Spindle brake Auto lube system Climb milling control Hardened and ground ways Variable feed power over arm with independent universal vertical head(fcm-152-ef) FCM-152-EF Shown with some options 59 (1492mm) 87 (22mm) 2 (55mm) 15 (385mm) 6 (15mm) 25 (625mm) 19 (475mm) 5 (125mm) 27 (675mm) 95 (249mm) 79 (213mm) 22 (55mm) (Standard) Multi Angle Universal Milling Head MOD. FCM-152-EF A B D G H J C E F I min max min max min max min max min max min max 5 125 26 1/2 675 5 7/8 15 24 5/8 625 5 11/16 145 9 13/16 25 27 9/16 7 3 1/8 8 5 1/8 13 6 1/2 165 25 3/16 64 5 7/8 15 25 3/16 7 5 1/8 13 16 3/4 425 35 7/16 9 MOD. FCM-152-EF 7 5/32 182 4 (Optional) Multi Angle Universal Milling Head With Manual Quill Travel A D E H I J B C F G min max min max min max min max min max min max 27 687 3 75 8 7/8 225 2 3/4 7 21 7/16 545 2 3/4 7 3 1/2 775 3 3/4 94 5 1/4 134 6 5/16 161 25 636 8 7/8 225 28 3/4 73 16 7/8 429 35 9/16 94
Optional Accessories Universal dividing head 6-8 - 1 Attachment for gear hobbing Precision rotary table Ø 1 - Ø 12.5 - Ø14 Rack milling attachment Universal vise KURT 6 or 8 Lagun 6 Slotting attachment 5 Stroke Digital readout systems (DRO) 2, 3 & 4 Axis Milling arbors 7 / 8-1 - 1 1 / 4 Work light Saftey guarding Collet chucks Collet Clamp kit X-Axis auto cycles 5
Specifications Table FU-13-EF FU-152-EF FU-185-EF Work Surface 51 x 11 (1,3 x 28mm) 6 x 13 (1,525 x 325 mm) 73 x 14 (1,85 x 35 mm) Number of T Slots 3 on 3 (3 x 64 mm) 3 on 3 (3 x 8 mm) 5 on 1 x 2.36 (5 x 16 mm) Distance Between T Slots 1 (16 mm) 1 (16 mm) - Table Swivel +/- 45 +/- 45 +/- 45 Traverse Manual Longitudinal Traverse - - 59 (1,5 mm) Automatic Longitudinal 34 (85 mm) 41 (15 mm) 55 (1,4 mm) Automatic Cross 12 (29 mm) 13 (33 mm) 16 (4 mm) Vertical 19 (475 mm) 19 (475 mm) 2 (5 mm) Horizontal Spindle Spindle Taper ISO 4 ISO 4 ISO 4 Arbor Milling Diameter Ø 1 (Ø 22 mm) Ø 1 (Ø 25.4 mm) Ø 1 (Ø 27 mm) Number of Speeds Variable (Hi-Lo) Continuous Variable (Hi-Lo) 12 Speed Range 5Hz[6 Hz] 35/1899 RPM [42/2,16 RPM] 35/18 RPM [42/2,16 RPM] 4/1,8 RPM Distance from Spindle to Overarm - - 6.1 (154 mm)) Feeds Number of Feeds Continious Variable Speed Continious Variable Speed Continious Variable Speed Longitudinal and Cross Feed /5 IPM (/1,3 mm/min) /5 IPM (/1,3 mm/min).4/5 IPM (/1,3 mm/min) Vertical /15 IPM (/39 mm/min) /15 IPM (/39 mm/min).2/25 IPM (5/65 mm/min) Rapid Traverse Longitudinal and Cross 12 IPM (2,6 mm/min) 12 IPM (2,6 mm/min) 5 IPM(1,3 mm/min) Vertical Feed mm/min 32 IPM (8 mm/min) 32 IPM (8 mm/min) 25 IPM(65 mm/min) Main Motor Main Spindle Motor 5.5 HP (4.1 kw) 7.5 HP (5.6 kw) 1 HP (7.5 kw) Working Feeds Quick Traverses Motor AC Brushless 5 HP (3.74 kw) AC Brushless 5 HP (3.74 kw) 2.5 HP (1.85 kw) Coolant System Coolant Pump.12 HP (.9 kw).12 HP (.9 kw).12 HP (.9 kw) Power Over Ram Ram Travel - - - Spindle Taper - - - Number of Speeds - - - Speed Range - - - Main Motor Power - - - Working Feeds - Quick Traverses - - - Ram Mounted Head (Variable Speed)- FUTV Spindle Taper - - - Number of Speeds - - - Speed Range (Low) - - - Speed Range (High) - - - Main Motor Power - - - Weight Machine Weight 3,97 lb (1,8 kg) 5,73 lb (2,6 kg) 7,55 lb (3,2 kg) Machine Weight Including Packing - - - Note: Specifications are rounded up to the nearest inch. Millimeter measurements are precise in accuracy Images used in this publication are for illustration purposes only, and may show optional features not included with the model. Republic Lagun is not responsible for any printed or typographical errors. Specification are subject to change without notice. Weights and measurements are approximate and may vary. Please contact the plant or distributor for further information. 6
FUTV-13-EF FUTV-152-EF FUTV-185-EF FCM-152-EF FCM-185-EF 51 x 11 6 x 13 73 x 14 6 x 13 73 X 14 (1,3 x 28 mm) (1525 x 325 mm) (1,85 x 35 mm) (1525 x 325 mm) (185 X 35 mm) 3 on 3 (3 x 64 mm) 3 on 4 (3 x 8 mm) 5 on.62 (5 x.24 mm) 3 on 3 (3 on 8 mm) 5 on 2 (6 mm) 1 (16 mm) - - - - +/- 45 +/- 45 +/- 45 +/- 45 +/- 45 - - - - - 34 (85 mm) 41 (1,5 mm) 55 (1,4 mm) 41 (15 mm) 55 (14 mm) 12 (29 mm) 13 (33 mm) 16(4 mm) 13 (33 mm) 16 (4 mm) 19 (475 mm) 19 (475 mm) 2 (5 mm) 19 (475 mm) 2 (5 mm) ISO 4 ISO 4 (ISO 5 Option) ISO 4 (ISO 5 Option) ISO 4 (ISO 5 Option) ISO 4 (ISO 5 Option) Ø 1 (Ø 22 mm) Ø 1 (Ø 27 mm) Ø 1 (Ø 27 mm) Ø 1 (Ø 27 mm) Ø 1 (Ø 27 mm) Variable Speed (Hi-Lo) Continuous Variable (Hi-Lo) 12 Continuous Variable (Hi-Lo) 12 35/18 RPM [42/216 RPM] 35/18 RPM [42-216 RPM] 4/18 RPM 35/18 RPM [42/216 RPM] 6 (147 mm) - - - 35/18 RPM [42-216 RPM] Continious Variable Speed Continious Variable Speed Continious Variable Speed Continious Variable Speed Continious Variable Speed /5 IPM (/13 MPM) /52 IPM (/1,3 mm/min).39/51 IPM (1/1,3 mm/min)./5 IPM (/1,3 mm/min).39/47 IPM (1/1,28 mm/min) /15 IPM (/39 mm/min) /15.375 IPM (/39 mm/min).19/25.5 IPM (65 mm/min)./15 IPM (/39 mm/min).2/24 IPM (5/64 mm/min) 12 IPM (2,6 mm/min) 8 IPM (2,5 mm/min) 51 IPM (1,3 mm/min) 12 IPM(26 mm/min) 48 IPM (1,28 mm/min) 32 IPM (8 mm/min) 24 IPM (615 mm/min) 26 IPM (65 mm/min) 32 IPM(615 mm/min) 24 IPM (64 mm/min) 5.5 HP (4.1 kw) 7.2 HP (5.6 kw) 1 HP (7.5 kw) 7.5 HP(5.6kw) 7.5 HP(5.6 kw) AC Brushless 5 HP (3.74 kw) 2.5 HP (1.85 kw) 2.5 HP (1.85 kw) AC Brushless 5 HP (3.74 kw) 2.5 HP(1.86 kw) - -.125 HP (.9 kw).12 HP(.9 kw).125 HP(.1 kw) - - - 22 (55 mm) 22 (55 mm) #4 opt. R8 #4 opt. R8 - #4 [#5 option] #4 [#5 option] Variable Variable Variable - - 6-4,2 RPM - - 35-1,8 RPM 35-1,6 RPM 5 HP (3.7 kw) 4 HP (3 kw) - 5.5 HP (4 kw) 5.5 HP(4 kw) - - - - - #4 opt. R8 #4 opt. R8 - - - Variable Variable - - - 6-49 RPM (6 Hz) 6-49 RPM (6 Hz) - - 49-42 RPM (6 Hz) 49-42 RPM (6 Hz) - - - - - - - - 3,97 lb (1,8 kg) 5,73 lb (2,6 kg) 7,716 lb (3,5 kg) 6,39 lb (29 kg.) 7,4 lb (3,2 kg) - - - - - 7
Providing solutions since 1965 Headquarters District office Aircraft & Space Honeywell Aerospace Boeing Company Hughes Aircraft Lockheed Aircraft NASA Northrop Grumman Rockwell Internantional BAE Systems Space X Raytheon Rolls - Royce Bombarier Parker Hannifin United Technologies Bell Helicopter Prat Whytney Computer & Electronic I.B.M General Dynamics Corp Hewlett Packard Corp Honeywell International, Inc. Dell, Inc. Siemens Bosch RexRoth Construction & Farm Machinery Caterpillar Inc. Navistar Insegersoll-Rand Company John Deere Komatsu America Others Allied Chemical Dresser Industries Hollymatic Corp. General Electric Company Servo Products Weyerhauser Company Westinghouse Corp. Toyota Motor Corp. Roland Sands Design Educational Institutions Siemens Energy Universities Community Collages Military U.S. Army U.S. Navy U.S. Air Force U.S. Marines U.S. Coast Guard U.S. Department of Defense Manual Machines Vertical Mills - Vertical Mills - Vertical Horizontal Mills - Vertical Bed Mills - Horizontal Boring Mills Lathes - Toolroom Lathes - Ultra Precision Lathes - Vertical Turning Centers - Boring Lathes Shapers Drills - Radial drills - Drill presses Grinders - Centerless Grinders - Internal Grinders - Roll Grinders - Surface Grinders - Universal Cylindrical Grinders CNC Machines Mills - Knee Mills - Studio Mills Machining Centers - Vertical Machining Center - Vertical Grinding Center - Traveling Column - Horizontal Machining Center Lathes - Universal Turning - Slant Bed Lathes Heavy Machines Bed Type Milling Machine Bridge Type Machining Centers Moving Column Type Machining Centers Gantry Type Machining Centers Large Bore Turning Centers Multiprocess Turning Centers Descriptions, specifications and illustrations are subject to change without notice. Always refer to a Lagun Engineering Solution formal quotation. Not responsible for any misprints or typographical errors. Please contact us for more information and individual machine catalogs. 8 Sprucelake Drive, Harbor City, CA. 971 Phone: 31.518.11 Toll Free: 8.421.215 Fax: 31.83.923 Web: www.lagun.com