Characteristics brushless dc motor 24..48 V - Modbus TCP interface - L = 174 mm - 54:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1540.00 USD Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Phase [Us] rated supply voltage Network type Communication interface Length Winding type Electrical connection Holding brake Gear box type Oct 18, 2018 Lexium integrated drive Motion integrated drive ILE Brushless dc motor Single phase 24 V 48 V DC Integrated Modbus TCP 6.85 in (174 mm) Medium speed of rotation and medium torque Printed circuit board connector Without Reduction ratio 54:1 (490:9) Nominal speed Nominal torque Complementary Transmission rate Mounting support Motor flange size Number of motor stacks 1 Centring collar diameter Straight teeth gear, 4 stages 73 rpm at 24 V 92 rpm at 48 V 88.5 lbf.in (10 N.m) at 48 V 88.5 lbf.in (10 N.m) at 24 V 10, 100 Mbits Flange 2.6 in (66 mm) 0.63 in (16 mm) 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Centring collar depth Number of mounting holes 4 Mounting holes diameter Circle diameter of the mounting holes Feedback type Shaft end Second shaft Shaft diameter Shaft length Key width Supply voltage limits Current consumption Associated fuse rating Commissioning interface Input/Output type Voltage state 0 guaranteed Voltage state 1 guaranteed Discrete input current Discrete output voltage Maximum switching current Protection type Supply current Nominal output power Peak stall torque Continuous stall torque Detent torque Speed feedback resolution Accuracy error 0.16 in (4 mm) 0.17 in (4.4 mm) 2.9 in (73.54 mm) BLDC encoder Keyed Without second shaft end 0.39 in (10 mm) 0.98 in (25 mm) 0.63 in (16 mm) 18...55.2 V 7000 ma (peak) 5500 ma (maximum continuous) 16 A RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) 4 signals (each be used as input or output) -3...4.5 V 15...30 V <= 10 ma at 24 V on/sto_a for safety input <= 3 ma at 24 V on/sto_b for safety input 2 ma at 24 V for 24 V signal interface 23...25 V 100 ma per output 200 ma total Overload of output voltage Safe torque off Short circuit of the output voltage Supply: 0.1 A, power stage disabled Supply: 3.8 A, 48 V Supply: 6.8 A, 24 V 112 W at 48 V 90 W at 24 V 184.96 lbf.in (20.9 N.m) at 24 V 184.96 lbf.in (20.9 N.m) at 48 V 102.65 lbf.in (11.6 N.m) 38.58 lbf.in (4.36 N.m) 12 points/turn (motor) 0.55 (gearbox output) +/- 0.5 point Torsional backlash <= 1 Rotor inertia Maximum mechanical speed Maximum radial force Fr Maximum axial force Fa Service life in hours Marking Type of cooling Product weight 441 kg.cm² 92 rpm 200 N (long-term operation) 200 N (short-term operation) 10 N (long-term operation) 80 N (short-term operation) 2500 h of bearing: (short-term operation) 15000 h of bearing: (long-term operation) CE Natural convection 4.08 lb(us) (1.85 kg) Environment Standards EN 50347 EN 61800-3:2001, second environment EN 61800-3 : 2001-02 EN/IEC 50178 EN/IEC 61800-3 2
Product certifications Ambient air temperature for operation Permissible ambient air temperature around the device Ambient air temperature for storage Operating altitude Relative humidity IEC 60072-1 IEC 61800-3, Ed 2 CUL TÜV UL 32...104 F (0...40 C) without derating > 104...131 F (> 40...55 C) with power derating of 2 % per C 221 F (105 C) (power amplifier) 230 F (110 C) (motor) -13...158 F (-25...70 C) <= 3280.84 ft (1000 m) without derating 15...85 % without condensation Vibration resistance 20 m/s² (f = 10...500 Hz) for 10 cycles conforming to EN/IEC 60068-2-6 Shock resistance 150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29 IP degree of protection IP41 shaft bushing conforming to EN/IEC 60034-5 IP54 total except shaft bushing conforming to EN/IEC 60034-5 Ordering and shipping details Category 18288 - LEXIUM INTEGRATED DRIVES II Discount Schedule PC56 Nbr. of units in pkg. 1 Package weight(lbs) 6.1600000000000001 Returnability N Country of origin DE Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Product environmental profile Green Premium product Compliant - since 0910 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Available End of life manual Product end of life instructions California proposition 65 Available WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1 Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - More information For more information go to www.p65warnings.ca.gov Contractual warranty Warranty period 18 months 3
Dimensions Drawings Integrated Drive with Straight Teeth Gear Dimensions 1 Accessories: I/O signal insert with industrial connectors 2 Option: industrial connectors 3 Earth (ground) terminal 4 Accessories: cable entries Ø = 3... 9 mm/0.12... 0.35 in. 4
Connections and Schema Connection Example with 4 I/O Signals 5
Performance Curves Torque Characteristics X1 Speed of rotation of motor in rpm X2 Speed of rotation of gearing in rpm Y Torque in Nm 1.1 Max. torque at 24 V 1.2 Max. torque at 36 V 6