EX- series E D&D' F K G C I H J A B A Distance between tumblers 7 000 mm B Undercarriage length 350 mm C Counterweight clearance 3 000 mm D Rear-end swing radius 7 50 mm D' Rear-end length 7 0 mm E Overall width of upperstructure 00 mm F Overall height of cab 00 mm G Min. ground clearance 1 0 mm H Track gauge 000 mm I Track shoe width 1 00 mm J Undercarriage width 7 00 mm K Track height 730 mm Illustrations show diesel engine type. HYDRAULIC EXCAVATOR EX500- with Diesel Engine Engine Gross Power : x 1 11 kw ( x 1 500 HP) Operating Weight : Loading Shovel : 533 000 kg Backhoe : 537 000 kg EX500E- with Electric Motor Power Output : x 0 kw Operating Weight : Loading Shovel : 57 000 kg Backhoe : 531 000 kg Bucket Capacity Loading Shovel Bucket : Heaped : 7.0 -.0 m 3 Backhoe Bucket : SAE, PCSA Heaped : 3.0 m 3 CECE Heaped : 30.0 m 3
SPECIFICATIONS EX500- ENGINE Model... Cummins QSKTA50-CE Type... Water-cooled, -cycle, 1-cylinder, turbo-charged and after-cooled, direct injection chamber-type diesel engine Rated power SAE J15, gross... x 1 11 kw ( x 1 500 HP) at 1 00 min-¹ (rpm) Net... x 1 0 kw ( x 1 3 HP) at 1 00 min-¹ (rpm) Maximum torque... x 570 N m ( x 70 kgf m) at 1 00 min-¹ (rpm) Piston displacement... x 50 L Bore and stroke... 15 mm x 15 mm Starting system... V electric motor Batteries... x 1 V, x 0 AH Cold starting... Ether aided HYDRAULIC SYSTEM Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine speed sensing control system. OHS (Optimum Hydraulic System) 1 main pumps and valves system enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. Auto-idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system. Main pumps... 1 variable-displacement, axial piston pumps for front attachment, travel and swing. Pressure setting.... MPa (300 kgf/cm²) Max. oil flow... X 375 L/min, X 5 L/min Pilot pump... gear pump Pressure setting... 3. MPa (0 kgf/cm²) Max. oil flow... x L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit... Cylinder Dimensions Loading shovel. MPa (300 kgf/cm²).5 MPa (50 kgf/cm²). MPa (300 kgf/cm²) 3. MPa ( 0 kgf/cm²) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinders of loading shovel are provided with protector. Quan. Bore Rod diameter Boom 0 mm 300 mm Arm 1 30 mm 0 mm Bucket 30 mm 50 mm Dump 0 mm 10 mm Level 1 0 mm 300 mm Backhoe Quan. Bore Rod diameter BE-boom 0 mm 300 mm BE-arm 1 30 mm 0 mm Bucket 1 3 mm 30 mm Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter µm High pressure strainer 1 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 5 µm Pilot filter µm These filters are centralized in arrangement for facilitating maintenance. CONTROLS Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 1 Left Console Bucket Close Pedal (For Loading Shovel) Left Control Lever/Horn Switch 11 Bucket Open Pedal (For Loading Shovel) 3 Left Travel Pedal 1 Pilot Control Shut-Off Lever Left Travel Lever 13 Rear Console 5 Right Travel Lever 1 Emergency Engine Stop Switch Right Travel Pedal 15 Engine Speed Control Dial 7 Right Control Lever/Horn Switch 1 Key Switch Right Console 17 Monitor Display Operator s Seat 17 3 7 1 13 5 11 1 1 15 1 Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to engines, hydraulic and electrical components. ISO-met stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates. 11 1 1 13 13 1 Diesel Engine x 1 Center Joint Engine Radiator x 15 Battery Unit 3 Pump Drive Unit x 1 Cab Hydraulic Pump x 1 17 Air Filter (Outer / Inner) x 5 Engine-Pump Bulkhead x 1 Muffler x Hydraulic Tank 1 Folding Stairs 7 Fuel Tank 0 Fuel Cooler Control Valve x 1 Reserve Tank (Coolant) x High-Pressure Strainer x 1 LTA Radiator x Hydraulic Oil Cooler x 3 Pump Transmission Oil Cooler x 11 Hydraulic Oil Cooling Fan Motor x Reserve Tank (Engine Oil) x 1 Lubricator 5 Fuel Filter (Water Separator) x 13 Swing Device x Ladder 11 1 13 13 15 5 5 3 1 3 1 Swing Mechanism high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed... 3.3 min-¹ (rpm) 1 1 1 17 1 7 0 17 1 3 5 3 5 Operator's Cab The sturdy cab, with OPG top guard level II (ISO), helps protect the operator from falling objects. Independent, pressurized,1 00 mm wide, 150 mm high, roomy 7.5 m 3 cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Noise level... 75 db(a) in the cab; on max. engine speed under no-load condition Eye level height... 7 0 mm 3
SPECIFICATIONS EX500- UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width... 1 00 mm Numbers of Rollers and Shoes (each Side) Upper rollers... 3 Lower rollers... 7 Track shoes... 3 Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : 0 to.3 km/h Low : 0 to 1. km/h Maximum traction force... 30 kn (7 000 kgf) Gradeability... 5 %(30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with.0 m 3 (heaped) bottom dump bucket Shoe type Shoe width Operating weight Ground pressure 3 kpa Triple grousers 1 00 mm 533 000 kg (.3 kgf/cm ) Backhoe Equipped with.1 m BE-boom, 5.0 m BE-arm, and 3.0 m 3 (SAE, PCSA heaped) bucket Shoe type Shoe width Operating weight Ground pressure Triple grousers 1 00 mm 537 000 kg 3 kpa (.1 kgf/cm ) SERVICE REFILL CAPACITIES liters Fuel tank 11 300 Engine coolant x 7 Engine oil Engine oil pan x 150 Reserve tank x 05 Pump drive x Swing drive device ( units) x Travel drive device ( units) x 30 Hydraulic system 00 Hydraulic oil tank 00 LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile strength steel fullbox section design. Efficient, automatic level crowding achieved by onelever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Bucket Capacity (heaped) Width No.of teeth Weight Type Materials density 7.0 m 3 700 mm 3 300 kg Bottom dump type general purpose 1 00 kg/m 3 or less.0 m 3 700 mm 300 kg Bottom dump type general purpose 1 00 kg/m 3 or less WORKING RANGES Meter 0 1 1 1 1 0 EH000ACII 0 1 1 1 1 0 Meter Ground Line Bucket capacity (heaped) 7.0 m 3.0 m 3 A Min. digging distance 150 00 B Min. level crowding distance 00 050 C Level crowding distance 5 550 5 350 D Max. digging reach 1 00 17 000 E Max. cutting height 1 00 1 00 E Max. dumping height 13 0 13 0 F Max. digging depth 550 00 G Working radius at max. dumping height 00 00 H Max. bucket opening width 700 700 Arm crowding force on ground Bucket digging force 1 570 kn (10 000 kgf) 1 7 kn (17 000 kgf) 1 50 kn (155 000 kgf) 1 50 kn (1 000 kgf) 5
SPECIFICATIONS EX500- BACKHOE ATTACHMENTS Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket Capacity Width No.of SAE, PCSA CECE With Without Weight Type teeth heaped heaped side cutters side cutters 3.0 m 3 30.0 m 3 30 mm - 5 3 700 kg general purpose WORKING RANGES Meter 0 1 1 1 1 0 D F EH000ACII 0 1 1 1 1 0 Meter E G Ground Line BE-boom length.1 m BE-arm length 5.0 m A Max. digging reach 0 00 A' Max. digging reach (on ground) 1 00 B Max. digging depth 00 B' Max. digging depth (' level) 700 C Max. cutting height 1 700 D Max. dumping height 1 00 D' Min. dumping height 5 00 E Min. swing radius 00 F Max. vertical wall 300 G Min. level crowding distance 7 00 Bucket digging 1 0 kn ISO force (151 000 kgf) SAE, PCSA 1 370 kn ( 000 kgf) Arm crowd force ISO 1 300 kn (133 000 kgf) SAE, PCSA 1 0 kn (131 000 kgf) EQUIPMENT STANDARD EQUIPMENT ENGINE A alternator Heavy-duty type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Water filter Radiator reserve tank Fan guard Isolation-mounted engine Pre-lubrication system Auto-idle system Emergency engine stop system HYDRAULIC SYSTEM E-P control system OHS (Optimum Hydraulic System) FPS (Fuel-saving Pump System) Hydraulic drive cooling-fan system Forced-lubrication and forced-cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CAB OPG top guard level ll (ISO) Fluid-filled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) glass side and rear windows Parallel-link-type intermittent windshield wiper Front windshield washer Adjustable reclining seat with air suspension Footrest Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Seat belt Hot&cool-box Storage spaces Floor mat Air conditioner with defroster Rearview mirror Evacuation hammer Emergency escape device Trainer's seat Pilot control shut-off lever Standard equipment may vary by country, so please consult your Hitachi dealer for details. MONITOR SYSTEMS Meters: Hour meter. Fuel gauge. Hydraulic oil temperature gauge. Engine coolant temperature gauge. Tachometer. Engine oil pressure gauge. Engine oil temperature gauge. Battery voltage gauge. Ambient temperature. Pilot lamps (Green): Pre-lubrication. Auto-Idle. Travel Mode. Warning lamps (Red): Alternator. Engine stop. Coolant overheat. Hydraulic oil level. Autolubrication. Fast-filling. Tension. Electric lever. Emergency engine stop. Top valve. Engine over run. Coolant level. Engine oil pressure. Pump transmission oil level indicator. Warning lamp (Yellow): Exhaust temperature. Fuel temperature. Engine warning. Hydraulic oil overheat. Stairway position. Electrical equipment box. Pump contamination. Air cleaner restriction. Alarm buzzers: Overheat. Engine coolant pressure. Engine coolant level.fuel temperature. Engine oil pressure.engine oil temperature. Air intake manifold temperature. Crank case pressure. Pump transmission oil level.hydraulic oil level. Stop valve close. Fast-filling system panel position. Stairway position. Electric lever fault. DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of the engine and the hydraulic system. The record can be downloaded by PC and PDA. LIGHTS 1 High brightness working lights. 3 entrance lights. maintenance room lights. Lockable machine covers 700 kg counterweight Hydraulic drive grease gun with hose reel Folding stairs with wide steps Swing parking brake UNDERCARRIAGE Travel parking brake Travel motion alarm device Travel motor guard. (Backhoe only) Hydraulic track adjuster with N gas accumulator with relief valve 1 00 mm triple grouser shoes MISCELLANEOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner 1 V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) color monitor cameras ; front and rear Engine oil reserve system Hydraulic oil suction pump FAST-FILLING SYSTEM Fast-filling system (Wiggins) for fuel, hydraulic oil,coolant, swing device oil, pump transmission oil, engine oil,and grease (couplers not included). OPTIONAL EQUIPMENT Travel motor guard Travel device guard Fast-filling couplers Satellite data transmitting system Optional equipment may vary by country, so please consult your Hitachi dealer for details. 7
SPECIFICATIONS EX500E- ELECTRIC MOTOR High Voltage, Three Phase, Squirrel Cage Induction Motor, Totally Enclosed Air-to-Air-Cooled (TEAAC). Type... HITACHI TFOA-KK Rating Rated continuous output... 0 kw x Voltage... AC 000-00 V / 50 Hz AC 00-00 V / 0 Hz Number of poles... Synchronous RPM... 1 500 min -1 / 50 Hz 1 00 min -1 / 0 Hz Rated current... A x @ 00 V Insulation class... F class B raise Space heater included. Thermo-guard (temperature detector) Starting condition... Reactor 50 % tap HYDRAULIC SYSTEM OHS (Optimum Hydraulic System) 1 main pumps and valves system enable both independent and combined operations of all functions. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system. Main pumps... 1 variable-displacement, axial piston pumps for front attachment, travel and swing. Pressure setting.... MPa (300 kgf/cm²) Max. oil flow... X 375 L/min, X 5 L/min Pilot pump... gear pump Pressure setting... 3. MPa (0 kgf/cm²) Max. oil flow... x L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit.... MPa (300 kgf/cm²).5 MPa (50 kgf/cm²). MPa (300 kgf/cm²) 3. MPa ( 0 kgf/cm²) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Bucket cylinder of loading shovel is provided with protector. Cylinder Dimensions Loading shovel Quan. Bore Rod diameter Boom 0 mm 300 mm Arm 1 30 mm 0 mm Bucket 30 mm 50 mm Dump 0 mm 10 mm Level 1 0 mm 300 mm Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter µm High pressure strainer 1 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 5 µm Pilot filter µm These filters are centralized in arrangement for facilitating maintenance. CONTROLS Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 1 Left Console Bucket Close Pedal (For Loading Shovel) Left Control Lever/Horn Switch 11 Bucket Open Pedal (For Loading Shovel) 3 Left Travel Pedal 1 Pilot Control Shut-Off Lever Left Travel Lever 13 Rear Console 5 Right Travel Lever 1 Emergency Motor Stop Switch Right Travel Pedal 15 Key Switch 7 Right Control Lever/Horn Switch 1 Monitor Display Right Console Operator s Seat 1 3 7 1 13 5 11 1 1 15 Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Sidewalks provide easy access to motors, hydraulic and electrical components. ISO-met stairs and handrails. Sidewalks and stairs are provided with skid-resistant plates. 1 5 5 1 Main Motor x 1 Cubicle Coupler x 13 Control Valve x 3 Pump Drive Unit x 1 Swing Device x Hydraulic Pump x 1 15 Slip Ring 5 Hydraulic Oil Cooling Fan Motor x 1 Center Joint Hydraulic Oil Cooler x 17 High-Pressure Strainer x 1 7 Lubricator 1 Battery x Pump Transmission Oil Cooler Fan x 1 Cab Pump Transmission Oil Cooler x 0 Folding Stairs Motor-Pump Bulkhead x 1 Ladder 11 Hydraulic Oil Tank Cab Heater Unit Swing Mechanism high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed... 3.0 min-¹ (rpm) 1 15 1 11 1 1 1 1 1 7 17 1 17 3 3 1 1 0 Operator's Cab The sturdy cab, with OPG top guard level II (ISO), helps protect the operator from falling objects. Independent, pressurized,1 00 mm wide, 150 mm high, roomy 7.5 m 3 cab with tinted-glass windows features all-round visibility. Air-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instruments and control panel are within easy reach of the operator. 3 air conditioner system. Eye level height... 7 0 mm
SPECIFICATIONS EX500E- UNDERCARRIAGE Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width... 1 00 mm Numbers of Rollers and Shoes (each Side) Upper rollers... 3 Lower rollers... 7 Track shoes... 3 Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... High : 0 to.1 km/h Low : 0 to 1.5 km/h Maximum traction force... 30 kn (7 000 kgf) Gradeability... 5 %(30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with.0 m 3 (heaped) bottom dump bucket Shoe type Shoe width Operating weight Ground pressure 3 kpa Triple grousers 1 00 mm 57 000 kg (.37 kgf/cm ) Backhoe Equipped with.1 m BE-boom, 5.0 m BE-arm, and 3.0 m 3 (SAE, PCSA heaped) bucket Shoe type Shoe width Operating weight Ground pressure Triple grousers 1 00 mm 531 000 kg 3 kpa (.3 kgf/cm ) SERVICE REFILL CAPACITIES liters Pump drive x Swing drive device ( units) x Travel drive device ( units) x 30 Hydraulic system 00 Hydraulic oil tank 00 LOADING SHOVEL ATTACHMENTS Boom and arm are of all-welded, low-stress, high-tensile strength steel fullbox section design. Efficient, automatic level crowding achieved by onelever control as the parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (Auto-Leveling Crowd Mechanism). Bucket Capacity (heaped) Width No.of teeth Weight Type Materials density 7.0 m 3 700 mm 3 300 kg Bottom dump type general purpose 1 00 kg/m 3 or less.0 m 3 700 mm 300 kg Bottom dump type general purpose 1 00 kg/m 3 or less WORKING RANGES Meter 0 1 1 1 1 0 EH000ACII 0 1 1 1 1 0 Meter Ground Line Bucket capacity (heaped) 7.0 m 3.0 m 3 A Min. digging distance 150 00 B Min. level crowding distance 00 050 C Level crowding distance 5 550 5 350 D Max. digging reach 1 00 17 000 E Max. cutting height 1 00 1 00 E Max. dumping height 13 0 13 0 F Max. digging depth 550 00 G Working radius at max. dumping height 00 00 H Max. bucket opening width 700 700 Arm crowding force on ground Bucket digging force 1 570 kn (10 000 kgf) 1 7 kn (17 000 kgf) 1 50 kn (155 000 kgf) 1 50 kn (1 000 kgf) 11
SPECIFICATIONS EX500E- BACKHOE ATTACHMENTS Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket Capacity Width No.of SAE, PCSA CECE With Without teeth heaped heaped side cutters side cutters Weight Type 3.0 m 3 30.0 m 3 30 mm - 5 3 700 kg general purpose WORKING RANGES Meter 0 1 1 1 1 0 D F EH000ACII 0 1 1 1 1 0 Meter E G Ground Line BE-boom length.1 m BE-arm length 5.0 m A Max. digging reach 0 00 A' Max. digging reach (on ground) 1 00 B Max. digging depth 00 B' Max. digging depth (' level) 700 C Max. cutting height 1 700 D Max. dumping height 1 00 D' Min. dumping height 5 00 E Min. swing radius 00 F Max. vertical wall 300 G Min. level crowding distance 7 00 Bucket digging 1 0 kn ISO force (151 000 kgf) SAE, PCSA 1 370 kn ( 000 kgf) Arm crowd force ISO 1 300 kn (133 000 kgf) SAE, PCSA 1 0 kn (131 000 kgf) EQUIPMENT EX5500E- STANDARD EQUIPMENT ELECTRIC MOTOR Space heater included Thermo-guard (temperature detector) HYDRAULIC SYSTEM OHS (Optimum Hydraulic System) Hydraulic drive cooling-fan system Forced-lubrication and forced-cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CAB OPG top guard level ll (ISO) Fluid-filled elastic mounts Laminated glass windshield Reinforced/tinted (bronze color) glass side and rear windows Parallel-link-type intermittent windshield wiper Front windshield washer Adjustable reclining seat with air suspension Footrest Air horn with electric compressor Auto-tuning AM-FM radio with digital clock Seat belt Hot&cool-box Storage spaces Floor mat Air conditioner with defroster Rearview mirror Evacuation hammer Emergency escape device Trainer's seat Pilot control shut-off lever MONITOR SYSTEMS Meters: Hour Meter Main Motor Coil Temperature Gauge (R) Main Motor Coil Temperature Gauge (L) Main Motor Ammeter (R) Main Motor Ammeter (L) Main Motor Voltmeter (R) Main Motor Voltmeter (L) Clock Battery Voltage Gauge Hydraulic Oil Temperature Gauge Ambient Temperature Pilot lamps (Green): Main Motor Run (R) Main Motor Run (L) Travel Mode Standard equipment may vary by country, so please consult your Hitachi dealer for details. Warning lamps: (Red): Pump Transmission Oil Level (R) Pump Transmission Oil Level (L) Pump Transmission Oil Temperature (R) Pump Transmission Oil Temperature (L) Pump Transmission Oil Cooler Fan Motor (R) Pump Transmission Oil Cooler Fan Motor (L) AC00V Power Source Cubicle Box Hydraulic Oil Level Auto-lubrication Stop Valve 3E Relay (R) 3E Relay (L) Main Motor Overheat (R) Main Motor Overheat (L) Main Motor Start Congestion (R) Main Motor Start Congestion (L) ACV Power Source Battery Charge Electric Lever Emergency Motor Stop Tension Warning lamps: (Yellow): Electrical Equipment Box Stairway Position Hydraulic Oil Overheat Pump Contamination Cab.heater Warning lamps: (Amber): Fast-filling Alarm buzzers: AC00V Power Source Cubicle Box Hydraulic Oil Level Stop Valve Stairway Position Pump Transmission Oil Level (R) Pump Transmission Oil Level (L) Pump Transmission Oil Temperature (R) Pump Transmission Oil Temperature (L) Pump Transmission Oil Cooler Fan Motor (R) Pump Transmission Oil Cooler Fan Motor (L) 3E Relay (R) 3E Relay (L) Main Motor Overheat (R) Main Motor Overheat (L) Main Motor Start Congestion (R) Main Motor Start Congestion (L) ACV Power Source Electric Lever Fast-filling DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of the hydraulic system. The record can be downloaded by PC and PDA. LIGHTS 1 High brightness working lights. 3 entrance lights. maintenance room lights. Lockable machine covers 57 300 kg counterweight Hydraulic drive grease gun with hose reel Folding stairs with wide steps Swing parking brake UNDERCARRIAGE Travel parking brake Travel motion alarm device Hydraulic track adjuster with N gas accumulator with relief valve 1 00 mm triple grouser shoes MISCELLANEOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner 1 V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) color monitor cameras ; front and rear Hydraulic oil suction pump FAST-FILLING SYSTEM Fast-filling system (Wiggins) for hydraulic oil, swing device oil, pump transmission oil, and grease (couplers not included). OPTIONAL EQUIPMENT Travel device guard Fast-filling couplers Satellite data transmitting system Optional equipment may vary by country, so please consult your Hitachi dealer for details. 1 13
TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. Cab Weight : 1 750 kg Main frame assembly Weight : 300 kg Box Weight : 53 kg Weight : 75 kg Counterweight (left) Weight : 00 kg Counterweight (right) Weight : 3 00 kg 30 5 0 5 0 500 3 0 30 Width : 1 0 Width : 3 500 Valve assembly Weight : 7 50 kg 3 70 Hydraulic oil tank Weight : 730 kg 1 300 Fuel tank Weight : 5 kg 0 50 3 30 3 3 Width : 3 00 Width : 3 Width : 00 Engine unit (left) Weight : 500 kg 0 Engine unit (right) Weight : 7 300 kg 00 3 3 0 1 70 1 1 0 1 0 1 370 1 01 Width : 000 Width : 0 Width : 1 50 Width : 1 50 Weight : 0 kg Weight : 5 kg Weight : 5 kg Weight : 0 kg 10 0 0 10 1 1 1 1 Width : 500 Width : 3 Width : 3 Width : 500 Weight : 1 kg Weight : 1 kg Weight : 11 kg Weight : 5 kg Weight : 5 kg 11 11 5 30 30 1 370 1 370 05 0 70 Width : 00 Width : 00 Width : 30 Width : 30 Width : 30 Width : 30 Width : 30 Mufflers and air cleaners assembly (left / right) Weight : 71 kg x Fuel cooler unit Weight : 53 kg Water Tanks (left / right) Weight : 177 kg x Folding stairs Weight : kg Reserve tanks (left / right) Weight : 370 kg x Hydraulic oil pump assembly Weight : 5 kg Weight : 1 kg Weight : 1 kg 3 150 5 3 73 3 50 1 30 5 1 1 73 0 1 1 1 0 01 573 573 130 Width : 1 350 Width : 0 Width : 735 Width : 1 0 Width : 50 Width : 35 Width : 3 Width : 13 1 15
TRANSPORTATION Weight : 15 kg Weight : 15 kg Weight : kg Weight : kg Weight : 0 kg Weight : 0 kg Guard Weight : 3 kg Pipe Weight : kg 550 70 550 70 550 50 05 5 1 0 00 000 0 1 0 Width : 0 Width : 0 Width : 0 Width : 131 Width : Width : 1 Width : 5 Width : 0 Weight : 3 kg Weight : 1 kg Weight : kg Weight : 1 kg Weight : 3 kg Pipe Weight : 37 kg Weight : 171 kg Weight : 11 kg Weight : kg Weight : 1 kg 1 3 3 05 5 771 0 03 1 10 000 0 0 1 00 1 150 1 0 Width : Width : Width : 77 Width : 331 Width : 5 Weight : 17 kg Weight : 15 kg Weight : kg Weight : 1 kg Weight : 3 kg 1 50 1 0 50 1 50 1 0 1 30 1 0 1 50 1 Width : 3 Width : 3 Width : 3 Width : 55 Width : 7 Weight : 3 kg Weight : 35 kg Weight : 31 kg Weight : 5 kg 5 150 1 0 1 1 1 0 1 0 330 1 00 00 Width : 0 Width : 77 Width : 77 Width : 77 Weight : 3 kg Weight : 3 kg Weight : 30 kg Weight : kg Weight : 3 kg 00 1 70 1 10 5 00 1 0 1 0 1 0 1 300 1 Width : 77 Width : 0 Width : 31 Width : 70 Width : 7 Weight : 5 kg Weight : kg Weight : 10 kg Weight : 171 kg Weight : 1 kg 350 0 000 1 10 00 00 1 00 330 5 00 Width : 77 1 30 Width : 7 Width : 35 Width : 3 Width : 0 Width : Width : 77 Width : 77 Width : 77 Width : 1 17
TRANSPORTATION UNDERCARRIAGE Weight : 17 kg Weight : 1 kg Weight : 1 kg Weight : 31kg Guard Weight : 3 kg Track center frame assembly Weight : 500 kg Track side frames Weight : 000 kg x Stopper Weight : 17 kg 1 00 1 0 1 0 1 000 1 0 1 1 730 000 070 3 70 10 1 00 750 Width : 1 Width : 3 Width : 70 Width : 7 Width : 5 Width : 10 Width : 0 Width : 1 Weight : 7 kg Weight : kg Weight : 11 kg Weight : 7 kg Weight : 5 kg Spacers Weight : 7.1 kg x 5 Bolts Weight :.1 kg x 5 Spacers Weight : 1 kg x Bolts Weight : 1. kg x 1 0 1 70 1 770 1 0 1 0 11 1 11 1 1 0 1 0 1 0 1 0 1 0 130 30 330 50 Width : 0 Width : 71 Width : 7 Width : 55 Width : 577 Width : 11 Width : 5 Width : 11 Width : 5 Weight : 1 kg Weight : 5. kg Bracket assembly Weight : 1 kg Bracket assembly Weight : 1 kg Weight : kg Weight : 53 kg Track links Weight : 7 50 kg x Track links Weight : 7 10 kg x Support Weight : 11 kg Ladder Weight : 3 kg 1 50 7 1 30 1 30 1 0 71 35 35 00 15 1 00 1 10 0 10 10 0 30 5 70 0 0 Width : 131 Width : 50 Width : 1 Width : 1 Width : 00 Width : 7 Width : 1 00 Width : 1 00 Width : 15 Width : 00 Weight : 5. kg Bolt assembly Weight : 31 kg x Bolt assembly Weight : 30 kg x Washers Weight : 0. kg x Bolts Weight : 11. kg x Motor cover Weight : 3 kg Motor cover Weight : kg Motor cover Weight : kg Motor cover Weight : 7 kg Motor cover Weight : kg 303 700 0 1 30 115 0 1 30 0 0 55 370 370 370 370 370 70 0 0 0 70 Width : 50 Width : 115 Width : 0 Width : 0 Width : 5 Width : 00 Width : 00 Width : 00 Width : 00 Width : 1 1 1
TRANSPORTATION BACKHOE ATTACHMENTS LOADER ATTACHMENTS Bucket assembly Capacity ; 3.0 m 3 (SAE, PCSA heaped) Weight : 3 700 kg Arm assembly Weight : 37 300 kg 70 Front bucket Capacity ;.0 m 3 (heaped) Weight : 1 300 kg Rear bucket Weight : 0 500 kg Teeth Weight : 50 kg x 3 700 3 0 3 370 1 700 30 0 700 3 30 000 Width : 0 Width : 350 Width : 70 Width : 70 Width : 30 Boom assembly Weight : 00 kg s Weight : 1. kg x Dump cylinders Weight : 5 kg x Arm assembly Weight : 1 300 kg 5 0 3 50 17 Width : 1 0 1 0 0 0 Width : 770 Width : 3 Width : 3 Boom cylinders Weight : 0 kg x Arm cylinders Weight : 0 kg x 5 770 70 s Weight : kg x Boom assembly Weight : 3 00 kg 0 75 5 Width : 0 Width : 5 3 50 7 7 Clamp assembly Weight : kg Width : 50 Width : 3 15 500 Width : 0 0 1
TRANSPORTATION LIFTING CAPACITIES LOADER ATTACHMENTS A: Load radius B: Load point height C: Lifting capacity Arm cylinder Weight : 30 kg Boom cylinders Weight : 00 kg x METRIC MEASURE 500 5 00 Rating over-side or 30 degree Rating over-front Unit: 1 000 kg 1 75 Conditions Load point height Load radius m m 1 m 1 m 1 m At max. reach meter Width : 70 Level cylinder Weight : 3 0 kg Width : 0 Bucket cylinders Weight : 00 kg x EX500- BE-boom.1 m BE-arm 5.0 m Bucket SAE, PCSA : 3.0 m³ CECE : 30.0 m³ Shoes 1 00 mm 1 m *33.5 *33.5 *3.1 *0. 17. 1 m *0. *0. *3. *1. 1. m *3. *3. *3.5 *3.5 *35.7 *1. 1. m *3. *3. *.0 *.0 *3. *3. *3.7 *0.3 1. m *55. *55. *51.5 *51.5 *. *. *3.5 *1.5 1. m *0.1 *0.1 *. *. *5.5 *5.5 *. *3. 1.0 m *.1 *.1 *71. *71. *5. *5. *7.1 *.7 1. 0 (Ground) *. *. *. *. *53. *53. - m *.5 *.5 *7. *7. *1. *1. *. *. - m *1. *1. *7. *7. *3. *3. *7.1 *7.1 0 3 0 55 Notes: 1.Ratings are based on SAE J7..Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. Width : 1 050 Width : 0 3
These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. Hitachi Construction Machinery Co., Ltd. www.hitachi-c-m.com KS-EN17 11.01(KA/KA,MT3) Printed in Japan