Electromechanical Rotary Actuator - EA 8132 This actuator is used in unmanned air vehicles and also throttle door controls and any accurate surface control. These actuators are designed to operate under extreme environmental conditions and have been chosen to support new development programs. This model is one our most versatile actuator designs primarily due to the ease of integration with several interface technologies. Output for current, velocity & position feedback Special stainless steel gearing 28 VDC 150 deg/sec 4 A 40 N.m 200 deg/sec 68 N.m 36 degree greater than 6 Hz 1.6 kg 130*97*58 mm
Electromechanical Rotary Actuator - EA 8086 This actuator is used in unmanned air vehicles, civil aircrafts and many other applications. The Affordable Actuator robust design and use of special material in gearing, environmental seals, and field-proven technologies provide excellent reliability and high endurance. Special stainless steel gearing Designed for high reliability in military applications 28 VDC 50 deg/sec 2 A 30 N.m 70 deg/sec 50 N.m 50 degree less than 30 arcmin greater than 6 Hz 1.5 kg 135*90*48 mm
Electromechanical Rotary Actuator - EA 8075 The following rotary actuator is developed for unmanned air vehicle applications. The baseline unit is well suited for a variety of applications and is not just limited to UAVs. These actuators are designed with respect to thermal behavior, environmental conditions and have been chosen to support new development programs. This model is one our most versatile actuator designs primarily due to the ease of integration with several interface technologies. Special stainless steel gearing Designed for low maintenance effort and long life cycle 27 VDC 70 deg/sec 2.5 A 15 N.m 140 deg/sec 30 N.m 60 degree greater than 6 Hz 1.3 kg 117*95*48 mm
Electromechanical Control Actuation System - CAS 8088 This control actuation system is an integration of 4 electromechanical rotary actuator. The necessity to compact design led to a high power density system. These control actuation system is designed to operate under extreme environmental conditions and have been chosen to support new development programs. 5 inches (127 mm) CAS section diameter Digital control loop Low risk due to re-use of qualified components Specifications for each actuator 23 VDC Whole CAS weight 100 deg/sec 2 A 15 N.m 110 deg/sec 20 N.m 25 degree greater than 10 Hz 5.5 kg 110 ( )*240 mm
Electromechanical Rotary Actuator - EA 8070 Harmonic drive gearbox Electrical stroke Bending moment strength 23 VDC 100 deg/sec 2 A 15 N.m 110 deg/sec 30 degree 20 N.m 2000 N @ 40 mm from nesting surface greater than 10 Hz 1.3 kg 151*55*88 mm
Electromechanical Rotary Actuator - EA 8081 Brushless DC motors Bending moment strength 54 VDC 100 deg/sec 4 A 60 N.m 110 deg/sec 100 N.m 8500 N @ 80 mm from nesting surface greater than 15 Hz 2.8 kg 160*92*93 mm
Electromechanical Rotary Actuator - EA 8054 Output for current, velocity & position feedback Disc DC motor Digital control loop 27 VDC 90 deg/sec 6.5 A 60 N.m 190 deg/sec 200 N.m 30 degree greater than 12 Hz 5.5 kg 218*150*113 mm