CATALOGUE MEDIUM TO HEAVY DUTY IDLER Sandvik Materials Handling PULLEYS, IDLERS AND MATERIALS HANDLING SYSTEMS
INDEX 3 ROLL INLINE CARRY & IMPACT PAGE 3 3 ROLL INLINE PLAIN P/A TRAINER PAGE 5 SINGLE ROLL FLAT CARRY & IMPACT PAGE 7 SINGLE ROLL PLAIN & DISC FLAT RETURN PAGE 9 SINGLE ROLL PLAIN P/A RETURN TRAINER PAGE 11 2 ROLL PLAIN & DISC VEE RETURN PAGE 13 2 ROLL PLAIN SUSPENDED VEE RETURN PAGE 15 3 ROLL SUSPENDED CARRY & IMPACT PAGE 17 ACCESSORIES PAGE 19 WEIGH IDLERS PAGE 22 ORDERING INFORMATION PAGE 23 SANDVIK IDLER SELECTION DATA SHEET PAGE 24
IMPORTANT NOTE FOR ALL DESIGNERS AND DRAFTSPERSONS The information contained in this catalogue is dimensional only To ensure any product selection performed provides the end users with the lowest total cost of ownership we have provided at page 24 of this catalogue a design submission sheet. If you require Sandvik to design/select equipment please complete the submission sheet and forward to your nearest Sandvik office. This selection process may result in some dimensions of the selected equipment differing from those stated in this catalogue. In the interest of product development, Sandvik reserves the right to change critical data at any time without prior notice. Dimensions shown are nominal only. Certified drawings are available on request.
THE BENEFITS OF SANDVIK CONVEYOR IDLERS It was in 1958 that Sandvik Engineers saw the need to improve the design of materials handling equipment. Systems needed to be capable of handling larger tonnages at higher speeds for mining and industry to achieve economies in operation. The challenge was met by a design for conveyor idlers which incorporated the many features found in Sandvik idlers ever since. The designs and features were unique at that time and many remain so even today. Sandvik have continued research work with new technologies and materials to develop the current range of Sandvik idlers which have the following features. Idlers Sandvik idler philosophy seeks to achieve a balance of relatively conservative designs, functionality, practicality, quality and economy. The application of this concept strengthened Sandvik position in the industry as a market leader and diversified the equipment range. The success of the Product has resulted in Sandvik idlers being the industry standard for many years. Rollers Sandvik rollers are robust assemblies of carefully fabricated shells and precision bearings fitted to high tolerance shafts. The Sandvik Standard roller range matches the shell, shaft and bearings into a sound unit for a variety of applications. Sandvik standard rolls are designed on sound engineering principles with particular attention to achieving: better balance increased bearing life less shell wear reduced power consumption lower vibration levels and quieter running Bearings All conveyor idler rolls require the bearing and shaft assembly to operate under deflection conditions. The shaft is only supported at each end and therefore must accept the load from the shell to the bearings at each end. This results in shaft bending and angular deflection at the bearings. Sandvik use Single Row Deep Groove Precision Ball Bearings because they: Satisfy deflection criteria without unreasonable increases in shaft diameters between the bearings. Will accept the axial thrust component of the load generated by conveyor belt movement across the roller face or where rollers are inclined in the wing position. Permit practical shaft diameters which satisfy bearing deflection criteria and allow manufacturers to use normal dynamic capacity ratings to assess B10 bearing life. Retain grease at the bearing faces thus permitting an extended period of operation without having to relubricate the roll. If the angular deflection limits are exceeded, the effect on ball bearings is less critical than for other bearing types. Lubrication Sandvik rolls are Factory greased to ensure correct quantity. The grease used is specially formulated for its lubricating and sealing properties. A range of special greases are also available for extreme hot or cold climatic conditions. Sandvik Breather Sandvik Materials Handling developed the unique breather system which still features in our heavy duty range of conveyor rolls. Each roller has a breather device through which cyclic induction and expulsion of air caused by temperature change can take place, thus removing the opportunity for contaminants to enter the grease reservoir and bearing assembly. Drag Roll drag is an important consideration as it can increase power consumption, starting tensions and in some cases, can affect the life of the roll shell. The latter being due to belt drag over the top of the roll thereby causing flat spots on the shell face. Sandvik roller designs optimize seal efficiency, correct bearing fits and lubrication to maintain drag at acceptable levels without compromising roller life or capacity. Shell to End Cap Weld Precision drawn end caps are welded to the tube with purpose-built machines. The shell tube is clamped at the ends during welding to maintain concentricity and minimize distortion. The result is minimum run-out, high balance quality rolls are produced. Total Indicator Runout (T.I.R.) Excessive T.I.R. causes noisy belt flap, structural vibrations, roll imbalance and reduced bearing life. Sandvik roll shells are checked regularly during manufacture to ensure they comply with quality standards established by Sandvik Materials Handling. The high level of balance achieved by Sandvik begins with the quality of the electric resistance welded high speed conveyor tube used in all Sandvik rolls. Tube The roller shell tube is produced to Sandvik s own specification. The tube is carefully rolled and electric resistance welded and drawn to control concentricity and that the weld is scarfed inside and out. Sealing All Sandvik rollers incorporate multi-labyrinth sealing to protect the bearings. The grease filled multi-labyrinth seal retards the ingress of contaminants to the bearing. In addition to the labyrinth seal, the outer seal has minimal clearance where the seal meets the shaft. This seal is further protected by an external weather seal. Internal seals to exclude foreign matter can enter the bearing cavity from the rear. Sandvik seal components are manufactured from precision rolled steel coil. To ensure long life and resistance to corrosion all Sandvik rolls are assembled with galvanised outer seals. The Sandvik multi-labyrinth seal has been continuously refined to become the most effective seal in the business. PAGE 1
Balance Destructive vibration can arise from imbalance of rollers producing fluctuating loads on the idler and supporting structure. Excessive imbalance can cause hammer on the bearings and loosening of bearing and seal fits. Sandvik rollers to a range of balance requirements from commercial quality through to dynamically balanced for demanding high speed low noise applications. Every roll is test run after final assembly at an equivalent belt speed of nine (9) metres per second. Shafts A common cause of bearing failure is excessive shaft deflection. Sandvik roller designs limit the extent of deflection to within the allowable limits of the bearing. Shaft diameters are selected for the idler assembly under full load operating conditions. Finish Sandvik standard paint finishes include solvent washed and spray painted alkyd yellow enamel on rolls; frames and structural members are painted with dipping enamel or galvanized as standard. Need special Idlers? The variety of idler types is seemingly endless. The basic frame mounted trough, impact and return idlers have multitudes of configurations, combinations and variants such as suspended (catenary), retractable, jack down, fold down. As maintenance and operation issues are identified, Sandvik has developed new solutions and designs to make light work of trouble spots. Alternative Materials Sandvik rolls are available in a variety of materials to suit particularly arduous applications, materials such as Aluminium, and high chromium alloys are available. Alloy rollers are ideally suited for use in salt applications or other highly corrosive materials handling systems. As well has having reduced dead weight, light weight Aluminium rolls offer less resistance to belt acceleration and provides less resistance on the conveyor normal running state, as a result of reduced mass of rotating parts. These standard aluminium rolls are fitted with special seals which are corrosion resistant. Use of these rolls will significantly reduce supporting structures, particularly on mobile stacking and loading installations and are easier to handle manually. Low Noise Noise generation is becoming an increasingly important consideration as industry becomes more environmentally conscious. Sandvik have developed a range of alternative rolls to address this issue. Each application will be different and may require different roll solutions. Base frame cross members are designed for optimum strength weight ratio whilst providing adequate support for the rolls under load conditions. Self Cleaning The inverted angle base frame has a self cleaning action by virtue of its sloping upper surfaces. This feature eliminates the possibility of rolls jamming due to material build up. Welding Jig welding of the base frames ensures slotted mounting brackets are accurately aligned. This has the effect of reducing installation costs and belt wear. All roll supports are welded to provide smooth weld surfaces for the application of protective coatings. Welds are cleaned prior to surface treatment. Blasting All frames and brackets are abrasive blasted prior to surface treatment. This process removes mill scale and any oil and grease to ensure good coverage and adhesion of the surface coatings. Inspection All frames are inspected prior to commencing the welding run to confirm accuracy of major dimensions. Selected frames are removed from the productions run at intervals and subjected to full dimension checks and weld quality inspection. SANDVIK IDLER STANDARD DATA Sandvik idlers are manufactured and supplied to the standards listed below. These standards have been developed over 40 years of research and experience in conveyor design to satisfy customer requirements. Quality controls and systems are in place in accordance with AS/NZS I.S.O. 9001-2000. Idler Mounting Centres To generally conform to ISO 1535 and accepted Australian practice, the mounting hone centres listed in the dimensional tables are based on: BELT WIDTH + 250mm for belts up to and including 1200 mm. BELT WIDTH + 300mm for belts over 1200 mm up to and including 1500 mm. BELT WIDTH + 400mm for belts 10 mm and over. Mounting foot slots are sized throughout the range to suit M12 bolts. We recommend the use of M12 large flat washers for attachment to the structure. A wide variety of alternate finishes are available. The most common alternative is hot dip galvanising, which can be applied to frames and rollers. IMPORTANT POINTS TO CONSIDER WHEN SELECTING IDLER ROLLERS Shaft diameters must be large enough to limit angular deflection at bearings to within bearing supplier recommendations. Design of seals must prevent ingress of dirt and water vapour to the bearing cavity. Utilise rollers with the minimum external seal gap. Choose rollers with large grease cavity. Select the roller with a low mass of rotating parts. Choose rollers where shell ends are integral with the shell and are pocket-free. Maximum performance is achieved where the roller load capacities of shells, shell ends, and bearings are balanced. Ensure minimum run-out to prevent vibration transmission to belt. Provided for vibration-free running and future capacity increases by selecting high balance rollers. Belt protection is enhanced by selecting rollers with well-rounded corners. All components of the idler are expected to run for millions of revolutions and should be precision made to closest possible tolerances. Utilise precision ball bearings to retain grease and give long maintenance free life. Rollers requiring frequent regreasing through grease nipples are subject to ingress of dirt and water to the bearing. Rollers with internal rubbing seals such as sealed-for-life bearings with felt or neoprene rubbing seals are subject to wear and eventual bearing failure. Rollers should be tightly fitted to a rigid base designed to shed dirt by minimising material buildup. Rollers operating in the open or subject to hosing down during inhouse house keeping should be fitted with weather seals. Select rolls in which labyrinth sealing has a minimum grease shear area. Features of the Sandvik Base Frame Idler bases are designed to provide a minimum gap between rollers, and give added Protection to the conveyor belt. Frame outer slopers are designed to prevent material build up around the shell end thereby avoiding premature shell wear due to roll jamming. Manufacturing Tolerance Nominal O.D of Roll Steel Shell+/- 0.3 mm Rubber Disc +/- 0.8 mm Thickness of Steel shell +/- 0.5 mm Roll face length +/- 1.5 mm Centre roll height above base line +/- 2.0 mm Transverse hole centers +/- 2.0 mm Longitudinal hole centers +/- 2.0 mm Return bracket drop height +/- 2.0 mm Trough angle +/- 1 Roll corner radius 3.0 mm minimum Corner weld penetration 80% Min Total Indicator Reading (TIR) Runout max Prok Standard Roller Up to 750 mm long Above 750 mm long Out of Balance Standard Rolls Weigh Rolls 0.65 mm 0.000867 x length 0.056 Nm Class G16 of AS3709 Low Noise rollers are available on request. PAGE 2
3 ROLL INLINE CARRY & IMPACT SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 25113-0750-00 280 1000 305 862 347 808 368 776 403 707 140 205 10.5 26.0 25113-0800-00 296 1050 317 908 362 852 384 818 422 746 150 212 10.8 27.8 25113-0900-00 333 1150 330 1015 381 953 405 915 448 835 150 212 11.7 30.1 25113-1000-00 3 1250 348 1092 403 1026 430 987 476 900 165 221 12.6 34.9 25113-1050-00 385 1300 357 1164 416 1095 444 1053 494 9 165 221 13.2 37.8 25113-1200-00 438 10 386 1317 3 1240 485 1192 542 1088 180 232 14.7 43.7 25113-1350-00 490 1650 404 1467 479 1382 515 1330 579 1214 180 232 16.2 48.1 25113-1400-00 496 1700 414 1484 490 1398 527 13 591 1228 200 240 16.2 56.1 25113-1500-00 543 1800 430 1619 514 1526 554 1469 624 1342 200 240 17.7 61.8 25113-10-00 563 2000 7 1677 544 1581 585 1522 658 1390 240 2 18.0 75.4 25113-1800-00 627 2200 479 1861 576 1756 622 1691 704 15 240 2 19.8 82.0 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 30113-0750-00 283 1000 317 856 359 798 379 764 413 691 140 218 16.8 32.3 30113-0800-00 299 1050 330 902 374 842 395 806 431 730 150 225 17.4 34.4 30113-0900-00 336 1150 342 1009 393 943 416 904 8 819 150 225 18.9 37.3 30113-1000-00 363 1250 361 1087 415 1017 441 975 486 885 165 234 20.1 43.9 30113-1050-00 388 1300 369 1159 428 1085 5 1041 503 9 165 234 21.3.9 30113-1200-00 441 10 398 1311 465 1230 497 1181 552 1073 180 2 23.7 52.7 30113-1350-00 493 1650 416 1461 491 1372 526 1318 589 1198 180 2 25.8 57.7 30113-1400-00 499 1700 426 1478 502 1388 538 1334 1 1213 200 253 26.1 65.7 30113-1500-00 546 1800 442 1614 526 1516 565 18 634 1326 200 253 28.2 72.3 30113-10-00 566 2000 469 1671 556 1571 596 1510 668 1375 240 273 29.1 86.2 30113-1800-00 630 2200 491 1856 588 1746 633 1679 714 1529 240 273 31.8 94.0 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 35113-0750-00 286 1000 335 879 378 817 397 782 432 718 140 230 17.1 38.3 35113-0800-00 300 1050 346 919 392 856 412 819 449 751 150 237 17.7 40.4 35113-0900-00 339 1150 3 1031 411 962 435 922 477 8 150 237 19.5 43.6 35113-1000-00 366 1250 378 1109 434 1036 9 993 505 911 165 246 20.7 49.1 35113-1050-00 391 1300 386 1181 446 1104 473 1059 522 971 165 246 21.9 51.1 35113-1200-00 444 10 416 1333 484 1249 515 1199 571 1099 180 257 24.3 58.3 35113-1350-00 496 1650 433 1483 510 1391 5 1336 8 1225 180 257 26.4 63.7 35113-1400-00 502 1700 443 1500 521 1407 556 1352 620 1239 200 265 26.7 71.8 35113-1500-00 549 1800 9 1636 544 1536 583 1476 653 1352 200 265 28.8 78.7 35113-10-00 569 2000 486 1693 574 1590 615 1528 687 1401 240 285 29.7 90.7 35113-1800-00 633 2200 508 1878 6 1765 651 1697 733 1555 240 285 32.4 101.8 35113-2000-00 708 2400 553 2094 663 1970 713 1895 805 1736 280 304 35.7 130.7 35113-2200-00 787 20 580 2321 702 2186 759 2103 861 1927 280 304 39.0 1.3 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 40113-0750-00 286 1000 347 870 389 804 408 767 441 699 140 243 20.7 41.6 40113-0800-00 300 1050 359 910 403 843 423 804 8 733 150 250 21.3 44.0 40113-0900-00 339 1150 372 1022 425 949 4 907 486 827 150 250 23.4 47.5 40113-1000-00 366 1250 390 1100 4 1023 470 978 514 892 165 259 24.9 53.0 40113-1050-00 391 1300 399 1172 8 1091 484 1044 532 953 165 259 26.1 55.3 40113-1200-00 444 10 428 1325 495 1236 525 1184 580 1081 180 270 28.8 62.8 40113-1350-00 496 1650 446 1474 521 1378 555 1321 617 1206 180 270 31.5 68.8 40113-1400-00 502 1700 6 1492 532 1394 567 1337 629 1221 200 278 31.8 76.9 40113-1500-00 549 1800 472 1627 556 1523 594 1461 662 1334 200 278 34.2 84.1 40113-10-00 569 2000 499 1685 586 1577 625 1513 697 1382 240 298 35.4 96.4 40113-1800-00 633 2200 520 1869 618 1752 662 1682 742 1537 240 298 38.7 107.8 40113-2000-00 708 2400 565 2085 674 1957 724 1880 814 1718 280 317 42.3 140.6 40113-2200-00 787 20 592 2312 714 2173 769 2089 870 1909 280 317 46.5 152.5 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 113-0750-00 284 1000 334 877 377 816 397 780 432 716 140 230 17.4 41.3 113-0800-00 298 1050 346 917 391 854 412 817 448 750 150 237 18.0 43.4 113-0900-00 337 1150 359 1029 411 9 434 920 476 844 150 237 19.8 47.2 113-1000-00 364 1250 378 1107 433 1034 9 991 504 909 165 246 21.0 53.0 113-1050-00 389 1300 386 1179 446 1102 473 1057 522 970 165 246 22.2 55.3 113-1200-00 442 10 415 1332 483 1247 514 1197 570 1098 180 257 24.3 62.8 113-1350-00 494 1650 433 1481 509 1389 544 1334 7 1223 180 257 26.7 68.5 113-1400-00 500 1700 443 1499 520 1406 556 1350 619 1238 200 265 27.0 76.9 113-1500-00 547 1800 9 1634 544 1534 582 1474 653 1351 200 265 29.1 81.7 113-10-00 567 2000 486 1692 574 1589 614 1527 687 1399 240 285 30.0 94.0 113-1800-00 631 2200 508 1876 6 1764 651 1696 732 1554 240 285 32.7 105.1 113-2000-00 706 2400 553 2092 662 1969 713 1893 804 1735 280 304 36.0 134.6 113-2200-00 785 20 580 2319 702 2184 758 2102 8 1926 280 304 39.6 1.9 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 50113-0750-00 284 1000 346 868 389 803 407 765 441 698 140 243 30.3 54.2 50113-0800-00 298 1050 358 908 403 841 422 802 8 732 150 250 31.5 56.9 50113-0900-00 337 1150 372 1020 422 947 4 905 485 826 150 250 34.2 61.9 50113-1000-00 364 1250 390 1098 4 1021 469 976 513 891 165 259 36.3 68.3 50113-1050-00 389 1300 398 1170 7 1089 484 1042 531 951 165 259 38.4 71.5 50113-1200-00 442 10 427 1323 495 1234 525 1182 579 1079 180 270 42.3 80.5 50113-1350-00 494 1650 4 1472 521 1376 555 1319 616 1205 180 270 46.2 88.3 50113-1400-00 500 1700 5 1490 532 1393 566 1335 628 1219 200 278 46.8 96.7 50113-1500-00 547 1800 471 1625 555 1521 593 19 662 1333 200 278 50.4 103.0 50113-10-00 567 2000 498 1683 585 1576 625 1512 696 1381 240 298 51.9 115.9 50113-1800-00 631 2200 520 1867 617 1751 661 1681 741 1535 240 298 56.7 129.4 50113-2000-00 706 2400 565 2083 674 1956 723 1879 813 1717 280 317 62.7 161.0 50113-2200-00 785 20 592 2310 713 2171 769 2087 869 1907 280 317 68.7 175.0 SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 54113-0750-00 286 1000 335 879 378 817 397 782 432 718 140 230 18.3 44.0 54113-0800-00 300 1050 346 919 392 856 412 819 449 751 150 237 18.9 46.4 54113-0900-00 339 1150 3 1031 411 962 435 922 477 8 150 237 20.7 50.2 54113-1000-00 366 1250 378 1109 434 1036 9 993 505 911 165 246 21.9 56.0 54113-1050-00 391 1300 386 1181 446 1104 473 1059 522 971 165 246 22.8 58.3 54113-1200-00 444 10 416 1333 484 1249 515 1199 571 1099 180 257 25.2 66.1 54113-1350-00 496 1650 433 1483 510 1391 5 1336 8 1225 180 257 27.6 72.1 54113-1400-00 502 1700 443 1500 521 1407 556 1352 620 1239 200 265 27.6 80.0 54113-1500-00 549 1800 9 1636 544 1536 583 1476 653 1352 200 265 29.7 85.6 54113-10-00 569 2000 486 1693 574 1590 615 1528 687 1401 240 285 30.6 97.9 54113-1800-00 633 2200 508 1877 6 1765 651 1697 733 1555 240 285 33.6 109.3 54113-2000-00 708 2400 553 2094 663 1970 713 1895 805 1736 280 304 36.9 139.1 54113-2200-00 787 20 580 2321 702 2186 759 2103 8 1927 280 304 40.2 150.7 SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 55113-1200-00 444 10 416 1333 484 1249 515 1199 571 1099 180 257 25.8 72.1 55113-1350-00 496 1650 433 1483 510 1391 5 1336 8 1225 180 257 28.2 78.7 55113-1400-00 502 1700 443 1500 521 1407 556 1352 620 1239 200 265 28.5 87.1 55113-1500-00 549 1800 9 1636 544 1536 583 1476 653 1352 200 265 30.3 92.5 55113-10-00 569 2000 486 1693 574 1590 615 1528 687 1401 240 285 31.2 105.1 55113-1800-00 633 2200 508 1878 6 1765 651 1697 733 1555 240 285 34.2 117.4 55113-2000-00 708 2400 553 2094 663 1970 713 1895 805 1736 280 304 37.2 147.8 55113-2200-00 787 20 580 2321 702 2186 759 2103 861 1927 280 304 40.8 1.3 55113-2400-00 848 2800 641 2497 773 2353 834 2264 944 2074 350 344 43.5 222.1 55113-2500-00 873 2900 649 2569 785 2421 848 2330 961 2135 350 344 44.7 228.5 Nominated E and F dimensions are based on standard base angle sizes. These dimensions will vary with a in base angle size as tabulated below. ANGLE 55 x 55 x 5EA 65 x 65 x 5EA 75 x 75 x 6EA 90 x 90 x 6EA 100 x 100 x 8EA 125 x 125 x 8EA 150 x 150 x 10EA E 140 150 165 180 200 240-25 30 F 205 212 221 232 240 2-35,,54 & 55 E 40,50 F 140 150 165 180 200 240-218 225 234 2 253 273 - SERIES E 140 150 165 180 200 240 280 F 230 237 246 257 265 285 304 E 140 150 165 180 200 240 280 F 243 250 259 270 278 298 317 00 Insert required Troughing Angle: 20, 30, 35 or. PAGE 3
50114-0800-00 300 1050 359 910 403 843 423 804 8 733 150 250 27.6 56.2 3 ROLL INLINE CARRY & IMPACT Nominated E and F dimensions are based on standard base angle sizes. These dimensions will vary with a in base angel size as tabulated below. ANGLE 55 x 55 x 5EA 65 x 65 x 5EA 75 x 75 x 6EA 90 x 90 x 6EA 100 x 100 x 8EA 125 x 125 x 8EA 150 x 150 x 10EA SERIES 59 & E F 140 243 150 250 165 259 180 270 200 278 240 298 280 317 SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 59113-0750-00 286 1000 347 870 389 804 408 767 441 699 140 243 31.2 56.9 59113-0800-00 300 1050 359 910 403 843 423 804 8 733 150 250 32.1 59.6 59113-0900-00 339 1150 372 1022 423 949 4 907 486 827 150 250 35.1 64.6 59113-1000-00 366 1250 390 1100 4 1023 470 978 514 892 165 259 37.2 71.3 59113-1050-00 391 1300 399 1172 8 1091 484 1044 532 953 165 259 39.0 74.5 59113-1200-00 444 10 428 1325 495 1236 525 1184 580 1081 180 270 43.2 84.1 59113-1350-00 496 1650 446 1474 521 1378 555 1321 617 1206 180 270 47.1 91.9 59113-1400-00 502 1700 6 1492 532 1394 567 1337 629 1221 200 278 47.7 100.3 59113-1500-00 549 1800 472 1627 556 1523 594 1461 662 1334 200 278 51.3 106.9 59113-10-00 569 2000 499 1685 586 1577 625 1513 697 1382 240 298 52.8 119.8 59113-1800-00 633 2200 520 1869 618 1752 662 1682 742 1537 240 298 57.6 133.6 59113-2000-00 708 2400 565 2085 674 1957 724 1880 814 1718 280 317 63.3 169.4 SERIES ROLL DIAMETER 178 IMPACT BEARING SIZE 6309 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 113-1000-00 366 1250 390 1100 4 1023 470 978 514 892 165 259 37.8 76.4 113-1050-00 391 1300 399 1172 8 1091 484 1044 532 953 165 259 39.6 79.9 113-1200-00 444 10 428 1325 495 1236 525 1184 580 1081 180 270 43.8 90.1 113-1350-00 496 1650 446 1474 521 1378 555 1321 617 1206 180 270 47.7 98.2 113-1400-00 502 1700 6 1492 532 1394 567 1337 629 1221 200 278 48.3 106.9 113-1500-00 549 1800 472 1627 556 1523 594 1461 662 1334 200 278 51.9 114.1 113-10-00 569 2000 499 1685 586 1577 625 1513 697 1382 240 298 53.4 127.3 113-1800-00 633 2200 520 1869 618 1752 662 1682 742 1537 240 298 58.2 139.0 113-2000-00 708 2400 565 2085 674 1957 724 1880 814 1718 280 317 63.9 174.2 113-2200-00 787 20 592 2312 714 2173 769 2089 870 1909 280 317 69.9 189.4 113-2400-00 848 2800 653 2488 784 2340 844 2250 953 2056 350 357 74.7 253.0 113-2500-00 873 2900 662 25 797 2408 859 2315 971 2116 350 357 76.5 2.3 59113-2200-00 787 20 592 2312 714 2173 769 2089 870 1909 280 317 69.3 184.0 SERIES 30 ROLL DIAMETER 159 IMPACT BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 30114-0750-00 282 1000 320 853 362 794 381 759 415 686 140 221 23.4 47.7 30114-0800-00 298 1050 333 899 377 837 398 801 434 724 150 228 24.6 49.9 30114-0900-00 335 1150 3 1006 395 938 419 899 4 814 150 228 27.0 54.5 30114-1000-00 362 1250 364 1083 418 1012 443 970 488 879 165 237 29.4 63.0 30114-1050-00 387 1300 372 1155 430 1080 8 1036 506 939 165 237 31.5 66.7 30114-1200-00 440 10 401 1308 468 1225 499 1176 554 1067 180 248 34.8 76.3 30114-1350-00 492 1650 419 18 494 1367 529 1313 591 1193 180 248 39.0 85.0 30114-1400-00 498 1700 429 1475 505 1384 540 1329 3 1207 200 256 39.3 95.2 30114-1500-00 5 1800 4 1610 528 1512 567 13 636 1321 200 256 42.3 101.5 30114-10-00 565 2000 472 1668 558 1567 599 1505 670 1369 240 276 44.4 119.0 30114-1800-00 629 2200 494 1852 590 1742 636 1674 716 1523 240 276 49.2 130.7 SERIES 50 ROLL DIAMETER 178 IMPACT BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P 50114-0750-00 286 1000 347 870 389 804 408 767 441 699 140 243 27.3 53.9 50114-0800-00 300 1050 359 910 403 843 423 804 8 733 150 250 27.6 56.2 50114-0900-00 339 1150 372 1022 423 949 4 907 486 827 150 250 30.9 61.4 50114-1000-00 366 1250 390 1100 4 1023 470 978 514 892 165 259 33.9 70.6 50114-1050-00 391 1300 399 1172 8 1091 484 1044 532 953 165 259 36.0 74.6 50114-1200-00 444 10 428 1325 495 1236 525 1184 580 1081 180 270 39.6 84.3 50114-1350-00 496 1650 446 1474 521 1378 555 1321 617 1206 180 270 44.7 94.0 50114-1400-00 502 1700 6 1492 532 1394 567 1337 629 1221 200 278.0 104.2 50114-1500-00 549 1800 472 1627 556 1523 594 1461 662 1334 200 278 48.3 110.9 50114-10-00 569 2000 499 1685 586 1577 625 1513 697 1382 240 298 50.7 126.8 50114-1800-00 633 2200 520 1869 618 1752 662 1682 742 1537 240 298 54.6 140.6 50114-2000-00 708 2400 565 2085 674 1957 724 1880 814 1718 280 317 62.1 180.4 50114-2200-00 787 20 592 2312 714 2173 769 2089 870 1909 280 317 68.1 196.3 SERIES ROLL DIAMETER 159 IMPACT BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. Nominated E and F dimensions are based on standard base angle sizes. These dimensions will vary with a in base angle size as tabulated below. C D C D C D C D R.P ANGLE SERIES 114-0750-00 286 1000 338 876 381 814 400 778 435 713 140 233 24.0 50.9 114-0800-00 300 1050 350 916 395 852 415 815 2 746 150 240 24.6 53.2 55 x 55 x 5EA E 140 30 IMPACT IMPACT F 221 E 140 50 IMPACT F 233 E 140 F 243 114-0900-00 339 1150 363 1029 414 959 437 918 479 841 150 240 27.3 57.8 65 x 65 x 5EA 150 228 150 240 150 250 114-1000-00 366 1250 381 1106 437 1032 462 989 507 906 165 249 29.4 66.7 75 x 75 x 6EA 165 237 165 249 165 259 114-1050-00 391 1300 390 1178 449 1101 476 1055 525 966 165 249 31.3 70.1 114-1200-00 444 10 419 1331 487 12 518 1195 573 1094 180 2 34.8 79.8 90 x 90 x 6EA 100 x 100 x 8EA 125 x 125 x 8EA 180 200 240 248 256 276 180 200 240 2 268 288 180 200 240 270 278 298 114-1350-00 496 1650 437 1481 513 1388 548 1332 610 1220 180 2 39.3 88.6 150 x 150 x 10EA - - 280 307 280 317 114-1400-00 502 1700 447 1498 524 1404 559 1348 622 1234 200 268 39.6 98.8 114-1500-00 549 1800 463 1633 547 1532 586 1472 656 1348 200 268 42.3 105.2 114-10-00 569 2000 490 1691 577 1587 617 1524 690 1396 240 288 44.4 120.8 114-1800-00 633 2200 511 1875 9 1762 654 1693 735 1550 240 288 48.0 134.3 114-2000-00 708 2400 556 2091 666 1967 716 1891 807 1731 280 307 54.6 172.9 114-2200-00 787 20 583 2319 705 2183 761 2099 863 1922 280 307.0 188.2 RP is an abbreviation for Rotating Parts. 00 Insert required Troughing Angle:20, 30, 35 or. SERIES 50 ROLL DIAMETER 178 IMPACT BEARING SIZE 6307 00 Insert required Troughing Angle: 20, 30, 35 or. CODE NUMBER A B 20 30 35 E F MASS Kgs. C D C D C D C D R.P PAGE 4 50114-0750-00 286 1000 347 870 389 804 408 767 441 699 140 243 27.3 53.9
3 ROLL INLINE PLAIN P/A TRAINER SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 25116-0750-00 280 1000 431 1199 475 1159 499 1161 537 1092 140 213 10.5 55.4 25116-0800-00 296 1050 444 12 490 1203 515 1203 556 1131 150 220 10.8 57.6 25116-0900-00 333 1150 3 1333 508 1304 530 1284 575 1206 150 220 11.7.6 25116-1000-00 3 1250 475 1430 536 1395 561 1372 610 1285 165 229 12.6 71.5 25116-1050-00 385 1300 480 1483 538 1429 569 1422 621 1331 165 229 13.2 75.2 25116-1200-00 438 10 509 1635 576 1573 611 1562 669 19 180 240 14.7 89.4 25116-1350-00 490 1650 527 1785 2 1716 641 1699 706 1584 180 240 16.2 96.7 25116-1400-00 496 1700 540 1821 623 1766 658 1732 732 1628 200 248 16.2 103.9 25116-1500-00 543 1800 549 1918 636 18 673 1822 751 1713 200 248 17.7 111.6 25116-10-00 563 2000 533 2013 676 1950 716 1908 801 1789 240 268 18.0 130.4 25116-1800-00 627 2200 8 2217 708 2124 759 2093 8 1944 240 268 19.8 140.1 00 Insert required Troughing Angle: 20, 30, 35 or. SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 40116-0750-00 283 1000 446 1227 490 1185 513 1166 551 1117 140 251 20.7 72.1 40116-0800-00 299 1050 8 1267 509 1241 534 1220 568 1151 150 258 21.3 74.9 40116-0900-00 336 1150 468 1361 523 1330 550 1306 596 12 150 258 23.4 79.3 40116-1000-00 363 1250 489 17 551 1421 581 1394 631 1324 165 267 24.9 90.9 40116-1050-00 388 1300 494 1510 558 1472 589 1444 634 1356 165 267 26.1 94.0 40116-1200-00 441 10 524 1663 591 1598 625 1567 683 1484 180 278 28.8 109.8 40116-1350-00 493 1650 541 1813 617 1742 655 1704 720 1610 180 278 31.5 118.7 40116-1400-00 499 1700 555 1849 638 1792 678 1753 746 1652 200 286 31.8 126.0 40116-1500-00 546 1800 564 1946 651 1886 693 1844 765 1738 200 286 34.2 135.3 40116-10-00 566 2000 598 2041 691 1975 736 1929 813 1814 240 306 35.4 152.8 40116-1800-00 630 2200 623 22 723 2150 773 2098 859 1969 240 306 38.7 167.4 40116-2000-00 546 2400 661 2423 775 2338 829 2280 924 2136 280 325 42.3 199.9 40116-2200-00 566 20 684 2632 804 2510 863 25 965 2298 280 325 46.5 215.4 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 30116-0750-00 283 1000 431 1199 475 1159 499 1161 537 1092 140 226 16.8 61.7 30116-0800-00 299 1050 444 12 490 1203 515 1203 556 1131 150 233 17.4 64.2 30116-0900-00 336 1150 3 1333 508 1304 530 1284 575 1206 150 233 18.9 67.8 30116-1000-00 363 1250 475 1430 536 1395 561 1372 610 1285 165 242 20.1 80.5 30116-1050-00 388 1300 480 1483 538 1429 569 1422 621 1331 165 242 21.3 83.3 30116-1200-00 441 10 509 1635 576 1573 611 1562 669 19 180 253 23.7 98.4 30116-1350-00 493 1650 527 1785 2 1716 641 1699 706 1584 180 253 25.8 106.3 30116-1400-00 499 1700 540 1821 623 1766 658 1732 732 1628 200 261 26.1 113.5 30116-1500-00 546 1800 549 1918 636 18 673 1822 751 1713 200 261 28.2 122.1 30116-10-00 566 2000 533 2013 676 1950 716 1908 801 1789 240 281 29.1 141.2 30116-1800-00 630 2200 8 2217 708 2124 759 2093 8 1944 240 281 31.8 152.1 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 116-0750-00 284 1000 446 1227 490 1185 513 1166 551 1117 140 238 17.4 71.8 116-0800-00 298 1050 8 1267 509 1241 534 1220 568 1151 150 2 18.0 74.3 116-0900-00 337 1150 468 1361 523 1330 550 1306 596 12 150 2 19.8 79.0 116-1000-00 364 1250 489 17 551 1421 581 1394 631 1324 165 254 21.0 90.9 116-1050-00 389 1300 494 1510 558 1472 589 1444 634 1356 165 254 22.2 94.0 116-1200-00 442 10 524 1663 591 1598 625 1567 683 1484 180 265 24.3 109.8 116-1350-00 494 1650 541 1813 617 1742 655 1704 720 1610 180 265 26.7 118.4 116-1400-00 500 1700 555 1849 638 1792 678 1753 746 1652 200 273 27.0 126.0 116-1500-00 547 1800 564 1946 651 1886 693 1844 765 1738 200 273 29.1 132.9 116-10-00 567 2000 598 2041 691 1975 736 1929 813 1814 240 293 30.0 150.4 116-1800-00 631 2200 623 22 723 2150 773 2098 859 1969 240 293 32.7 164.7 116-2000-00 706 2400 661 2423 775 2338 829 2280 924 2136 280 312 36.0 193.9 116-2200-00 785 20 684 2632 804 2510 863 25 965 2298 280 312 39.6 208.8 00 Insert required Troughing Angle: 20, 30, 35 or. SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 35116-0750-00 286 1000 446 1227 490 1185 513 1166 551 1117 140 238 17.1 68.8 35116-0800-00 300 1050 8 1267 509 1241 534 1220 568 1151 150 2 17.7 71.3 35116-0900-00 339 1150 468 1361 523 1330 550 1306 596 12 150 2 19.5 75.4 35116-1000-00 366 1250 489 17 551 1421 581 1394 631 1324 165 254 20.7 87.0 35116-1050-00 391 1300 494 1510 558 1472 589 1444 634 1356 165 254 21.9 89.8 35116-1200-00 444 10 524 1663 591 1598 625 1567 683 1484 180 265 24.3 105.3 35116-1350-00 496 1650 541 1813 617 1742 655 1704 720 1610 180 265 26.4 113.6 35116-1400-00 502 1700 555 1849 638 1792 678 1753 746 1652 200 273 26.7 120.9 35116-1500-00 549 1800 564 1946 651 1886 693 1844 765 1738 200 273 28.8 129.9 35116-10-00 569 2000 598 2041 691 1975 736 1929 813 1814 240 293 29.7 147.1 35116-1800-00 633 2200 623 22 723 2150 773 2098 859 1969 240 293 32.4 161.4 35116-2000-00 708 2400 661 2423 775 2338 829 2280 924 2136 280 312 35.7 190.0 35116-2200-00 787 20 684 2632 804 2510 863 25 965 2298 280 312 39.0 208.2 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 50116-0750-00 284 1000 446 1227 490 1185 513 1166 551 1117 140 251 30.3 84.7 50116-0800-00 298 1050 8 1267 509 1241 534 1220 568 1151 150 258 31.5 87.8 50116-0900-00 337 1150 468 1361 523 1330 550 1306 596 12 150 258 34.2 93.7 50116-1000-00 364 1250 489 17 551 1421 581 1394 631 1324 165 267 36.3 106.2 50116-1050-00 389 1300 494 1510 558 1472 589 1444 634 1356 165 267 38.4 110.2 50116-1200-00 442 10 524 1663 591 1598 625 1567 683 1484 180 278 42.3 127.5 50116-1350-00 494 1650 541 1813 617 1742 655 1704 720 1610 180 278 46.2 138.2 50116-1400-00 500 1700 555 1849 638 1792 678 1753 746 1652 200 286 46.8 1.8 50116-1500-00 547 1800 564 1946 651 1886 693 1844 765 1738 200 286 50.4 154.2 50116-10-00 567 2000 598 2041 691 1975 736 1929 813 1814 240 306 51.9 172.3 50116-1800-00 631 2200 623 22 723 2150 773 2098 859 1969 240 306 56.7 189.0 50116-2000-00 706 2400 661 2423 775 2338 829 2280 924 2136 280 325 62.7 220.3 50116-2200-00 785 20 684 2632 804 2510 863 25 965 2298 280 325 68.7 237.9 00 Insert required Troughing Angle: 20, 30, 35 or. RP is an abbreviation for Rotating Parts. 00 Insert required Troughing Angle:20, 30, 35 or. PAGE 5
3 ROLL INLINE PLAIN P/A TRAINER SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 54116-0750-00 286 1000 446 1227 490 1185 513 1166 551 1117 140 238 18.3 74.5 54116-0800-00 300 1050 8 1267 509 1241 534 1220 568 1151 150 2 18.9 77.3 54116-0900-00 339 1150 468 1361 523 1330 550 1306 596 12 150 2 20.7 82.0 54116-1000-00 366 1250 489 17 551 1421 581 1394 631 1324 165 254 21.9 93.9 54116-1050-00 391 1300 494 1510 558 1472 589 1444 634 1356 165 254 22.8 97.0 54116-1200-00 444 10 524 1663 591 1598 625 1567 683 1484 180 265 25.2 113.1 54116-1350-00 496 1650 541 1813 617 1742 655 1704 720 1610 180 265 27.6 122.0 54116-1400-00 502 1700 555 1849 638 1792 678 1753 746 1652 200 273 27.6 129.6 54116-1500-00 549 1800 564 1946 651 1886 693 1844 765 1738 200 273 29.7 136.8 54116-10-00 569 2000 598 2041 691 1975 736 1929 813 1814 240 293 30.6 154.3 54116-1800-00 633 2200 623 22 723 2150 773 2098 859 1969 240 293 33.6 168.9 54116-2000-00 708 2400 661 2423 775 2338 829 2280 924 2136 280 312 36.9 198.4 54116-2200-00 787 20 684 2632 804 2510 863 25 965 2298 280 312 40.2 213.6 00 Insert required Troughing Angle: 20, 30, 35 or. SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 59116-0750-00 286 1000 446 1227 490 1185 513 1166 551 1117 140 251 31.2 87.4 59116-0800-00 300 1050 8 1267 509 1241 534 1220 568 1151 150 258 32.1 90.5 59116-0900-00 339 1150 468 1361 523 1330 550 1306 596 12 150 258 35.1 96.4 59116-1000-00 366 1250 489 17 551 1421 581 1394 631 1324 165 267 37.2 109.2 59116-1050-00 391 1300 494 1510 558 1472 589 1444 634 1356 165 267 39.0 113.2 59116-1200-00 444 10 524 1663 591 1598 625 1567 683 1484 180 278 43.2 131.1 59116-1350-00 496 1650 541 1813 617 1742 655 1704 720 1610 180 278 47.1 141.8 59116-1400-00 502 1700 555 1849 638 1792 678 1753 746 1652 200 286 47.7 149.4 59116-1500-00 549 1800 564 1946 651 1886 693 1844 765 1738 200 286 51.3 158.1 59116-10-00 569 2000 598 2041 691 1975 736 1929 813 1814 240 306 52.8 176.2 59116-1800-00 633 2200 623 22 723 2150 773 2098 859 1969 240 306 57.6 193.2 59116-2000-00 708 2400 661 2423 775 2338 829 2280 924 2136 280 325 63.3 228.7 59116-2200-00 787 20 684 2632 804 2510 863 25 965 2298 280 325 69.3 246.9 00 Insert required Troughing Angle: 20, 30, 35 or. SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 55116-1200-00 444 10 524 1663 591 1598 625 1567 683 1484 180 265 25.8 119.1 55116-1350-00 496 1650 541 1813 617 1742 655 1704 720 1610 180 265 28.2 128.6 55116-1400-00 502 1700 555 1849 638 1792 678 1753 746 1652 200 273 28.5 136.2 55116-1500-00 549 1800 564 1946 651 1886 693 1844 765 1738 200 273 30.3 143.7 55116-10-00 569 2000 598 2041 691 1975 736 1929 813 1814 240 293 31.2 161.5 55116-1800-00 633 2200 623 22 723 2150 773 2098 859 1969 240 293 34.2 177.0 55116-2000-00 708 2400 661 2423 775 2338 829 2280 924 2136 280 312 37.2 207.1 55116-2200-00 787 20 684 2632 804 2510 863 25 965 2298 280 312 40.8 223.2 55116-2400-00 848 2800 7 2808 880 2703 944 2633 1056 2430 350 352 43.5 306.9 55116-2500-00 873 2900 761 2917 897 2788 964 2715 1080 2504 350 352 44.7 314.6 00 Insert required Troughing Angle: 20, 30, 35 or. SERIES ROLL DIAMETER 178 BEARING SIZE 6309 CODE NUMBER A B 20 30 35 E F MASS Kgs. J M J M J M J M R.P 116-1000-00 366 1250 489 17 551 1421 581 1394 631 1324 165 267 37.8 114.3 116-1050-00 391 1300 494 1510 558 1472 589 1444 634 1356 165 267 39.6 118.6 116-1200-00 444 10 524 1663 591 1598 625 1567 683 1484 180 278 43.8 137.1 116-1350-00 496 1650 541 1813 617 1742 655 1704 720 1610 180 278 47.7 148.1 116-1400-00 502 1700 555 1849 638 1792 678 1753 746 1652 200 286 48.3 156.0 116-1500-00 549 1800 564 1946 651 1886 693 1844 765 1738 200 286 51.9 165.3 116-10-00 569 2000 598 2041 691 1975 736 1929 813 1814 240 306 53.4 183.7 116-1800-00 633 2200 623 22 723 2150 773 2098 859 1969 240 306 58.2 198.6 116-2000-00 708 2400 661 2423 775 2338 829 2280 924 2136 280 325 63.9 233.5 116-2200-00 787 20 684 2632 804 2510 863 25 965 2298 280 325 69.9 252.3 116-2400-00 848 2800 7 2808 880 2703 944 2633 1056 2430 350 365 74.7 337.8 116-2500-00 873 2900 761 2917 897 2788 964 2715 1080 2504 350 365 76.5 346.4 00 Insert required Troughing Angle: 20, 30, 35 or. RP is an abbreviation for Rotating Parts. 00 Insert required Troughing Angle:20, 30, 35 or. PAGE 6
SINGLE ROLL FLAT CARRY & IMPACT SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 25155-0750 846 1000 158 8.6 17.9 25155-0800 896 1050 158 9.1 18.8 25155-0900 996 1150 158 10.0 20.5 25155-1000 1096 1250 158 10.9 23.8 25155-1050 1146 1300 158 11.4 24.8 25155-1200 1296 10 158 12.8 27.6 25155-1350 1496 1650 158 14.6 33.7 25155-1400 1546 1700 158 15.1 34.7 25155-1500 1646 1800 158 16.0 36.8 25155-10 1846 2000 158 17.8 40.8 25155-1800 2046 2200 158 19.6 48.3 40155-0750 852 1000 184 16.6 28.0 40155-0800 902 1050 184 17.5 29.3 40155-0900 1002 1150 184 19.2 33.6 40155-1000 1102 1250 184 20.9 36.4 40155-1050 1152 1300 184 21.8 37.8 40155-1200 1302 10 184 24.3 44.3 40155-1350 1502 1650 184 27.8 50.3 40155-1400 1552 1700 184 28.6 51.8 40155-1500 1652 1800 184 30.3 59.9 40155-10 1852 2000 184 33.8 66.5 40155-1800 2052 2200 184 37.2 73.1 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 30155-0750 849 1000 171 13.8 23.1 30155-0800 899 1050 171 14.5 24.2 30155-0900 999 1150 171 16.0 27.9 30155-1000 1099 1250 171 17.4 30.4 30155-1050 1149 1300 171 18.2 31.6 30155-1200 1299 10 171 20.4 35.2 30155-1350 1499 1650 171 23.3 42.4 30155-1400 1549 1700 171 24.0 43.7 30155-1500 1649 1800 171 25.5 46.3 30155-10 1849 2000 171 28.4 54.5 30155-1800 2049 2200 171 31.3.0 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 155-0750 850 1000 171 14.1 26.9 155-0800 900 1050 171 14.8 28.2 155-0900 1000 1150 171 16.3 30.8 155-1000 1100 1250 171 17.7 35.2 155-1050 1150 1300 171 18.5 36.6 155-1200 1300 10 171 20.7 40.7 155-1350 1500 1650 171 23.6 48.9 155-1400 1550 1700 171 24.3 50.4 155-1500 1650 1800 171 25.8 53.3 155-10 1850 2000 171 28.7 61.5 155-1800 2050 2200 171 31.6 67.6 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 35155-0750 852 1000 171 14.0 25.4 35155-0800 902 1050 171 14.7 26.6 35155-0900 1002 1150 171 16.2 30.6 35155-1000 1102 1250 171 17.6 33.2 35155-1050 1152 1300 171 18.4 34.5 35155-1200 1302 10 171 20.6 40.5 35155-1350 1502 1650 171 23.5 46.0 35155-1400 1552 1700 171 24.2 47.4 35155-1500 1652 1800 171 25.6 55.2 35155-10 1852 2000 171 28.6 61.3 35155-1800 2052 2200 171 31.5 67.4 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 50155-0750 850 1000 184 24.5 36.0 50155-0800 900 1050 184 25.8 37.7 50155-0900 1000 1150 184 28.3 42.8 50155-1000 1100 1250 184 30.9 46.5 50155-1050 1150 1300 184 32.2 48.3 50155-1200 1300 10 184 36.0 56.0 50155-1350 1500 1650 184 41.1 64.6 50155-1400 1550 1700 184 42.3 65.6 50155-1500 1650 1800 184 44.9 69.4 50155-10 1850 2000 184 49.9 82.7 50155-1800 2050 2200 184 55.1 91.0 PAGE 7
SINGLE ROLL FLAT CARRY & IMPACT MANUFACTURERS OF HIGH QUALITY CONVEYOR EQUIPMENT SINGLE ROLL PLAIN FLAT CARRY. SERIES 54 ROLL DIAMETER SERIES 152 05 BEARING ROLL SIZE DIAMETER 6308 114 SERIES 59 BEARING ROLL SIZE DIAMETER 6205 178 BEARING SIZE 6308 CODE NUMBER A B CODE NUMBER E A F MASS Kgs B CODE NUMBER E A F MASS B Kgs E F MASS Kgs 54155-0750 852 1000 05155-0500 595 171 14.4 750 27.3 59155-0750 852152 5.41000 10.2 184 24.7 40.7 54155-0800 902 1050 05155-00 695 171 15.1 850 30.1 59155-0800 902152 6.11050 12.2 184 26.0 42.7 54155-0900 1002 1150 05155-0650 7 171 16.5 900 32.9 59155-0900 1002152 6.51150 12.9 184 28.6 46.7 54155-1000 1102 1250 05155-0750 8 171 18.0 1000 35.6 59155-1000 1102152 7.31250 14.3 184 31.1 52.2 54155-1050 1152 1300 05155-0800 895 171 18.7 1050 39.1 59155-1050 1152152 7.71300 15.0 184 32.4 54.2 54155-1200 1302 10 05155-0900 995 171 20.9 1150 43.5 59155-1200 1302152 8.510 17.6 184 36.2 65.8 54155-1350 1502 1650 05155-1000 1095 171 23.8 1250 51.2 59155-1350 1502152 9.31650 19.1 184 41.3 74.8 54155-1400 1552 1700 05155-1050 11 171 24.6 1300 52.7 59155-1400 1552152 9.71700 19.8 184 42.5 77.1 54155-1500 1652 1800 05155-1200 1295 171 26.0 10 55.8 59155-1500 1652152 10.9 1800 22.0 184.1 81.6 54155-10 1852 2000 RP is an abbreviation for Rotating 171Parts. 28.9 68.1 59155-10 1852 2000 184 50.1 96.2 54155-1800 2052 2200 171 31.8 74.9 59155-1800 2052 2200 184 55.2 105.9 SERIES 55 ROLL DIAMETER SERIES 152 10 BEARING ROLL SIZE DIAMETER 6309 102 SERIES BEARING ROLL SIZE DIAMETER 6204 178 BEARING SIZE 6309 CODE NUMBER A B CODE NUMBER E A F B MASS Kgs CODE NUMBER E A F MASS B Kgs E F MASS Kgs 55155-1000 1102 10155-0350 1250 441 171 18.2 0 39.4 155-1000 1102144 3.21250 6.8 184 31.3 57.1 10155-0400 491 650 55155-1050 1152 1300 171 18.9.7 155-1050 1152144 3.51300 7.8 184 32.6 59.3 SERIES ROLL DIAMETER 159 BEARING SIZE 6307 55155-1200 1302 10155-00 10 541 171 21.1 700 50.9 155-1200 1302144 3.810 8.4 184 36.4 66.1 55155-1350 1502 10155-0500 1650 591 171 24.0 750 57.7 155-1350 CODE NUMBER 1502 A 144 4.11650 B 8.9 E 184 F 41.5 MASS Kgs 75.2 55155-1400 1552 10155-00 1700 691 171 24.8 850 59.5 155-1400 1552144 4.71700 10.0 184 42.8 77.5 55155-1500 1652 10155-0650 1800 741 171 26.2 900 62.9 156-00 155-1500 1652 685144 5.01800 850 11.4 174 184 16.9.3 26.9 82.0 55155-10 1852 10155-0750 2000 841 171 29.1 1000 75.3 156-0650 155-10 1852 735144 5.62000 900 12.6 174 184 18.4 50.4 28.9 96.6 55155-1800 2052 10155-0800 2200 891 171 32.1 1050 82.8 156-0750 155-1800 2052 835144 5.91000 2200 13.1 174 184 20.4 55.5 106.2 33.2 10155-0900 991 1150 156-0800 885144 6.51050 14.3 174 21.9 35.2 10155-1000 1091 1250 156-0900 985144 7.1150 16.9 174 23.9 38.4 10155-1050 1141 1300 156-1000 1085144 7.51250 17.5 174 26.4 42.0 10155-1200 1291 10 156-1050 1135144 8.41300 19.5 174 27.8.9 156-1200 1285 10 174 31.3 51.4 156-1350 1485 1650 174 36.3 61.6 156-1400 1535 1700 174 37.3 63.4 156-1500 1635 1800 174 39.8 67.3 2-30 IN THE INTEREST OF PRODUCT DEVELOPMENT, 156-10 PROK GROUP RESERVES 1835 THE 2000 174 44.7 77.5 RIGHT TO CHANGE CRITICAL DATA AT ANY TIME WITHOUT PRIOR NOTICE. 156-1800 2035 DIMENSIONS SHOWN ARE NOMINAL ONLY. CERTIFIED DRAWINGS ARE AVAILABLE ON REQUEST. 2200 174 49.2 85.2 SERIES ROLL DIAMETER 159 BEARING SIZE 6307 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 156-00 685 850 174 16.9 26.9 156-0650 735 900 174 18.4 28.9 156-0750 835 1000 174 20.4 33.2 156-0800 885 1050 174 21.9 35.2 156-0900 985 1150 174 23.9 38.4 156-1000 1085 1250 174 26.4 42.0 156-1050 1135 1300 174 27.8.9 156-1200 1285 10 174 31.3 51.4 156-1350 1485 1650 174 36.3 61.6 156-1400 1535 1700 174 37.3 63.4 156-1500 1635 1800 174 39.8 67.3 156-10 1835 2000 174 44.7 77.5 156-1800 2035 2200 174 49.2 85.2 50156-00 685 850 184 19.1 29.1 50156-0650 735 900 184 20.1 31.3 50156-0750 835 1000 184 23.0 35.9 50156-0800 885 1050 184 24.8 38.1 50156-0900 985 1150 184 27.0 41.5 50156-1000 1085 1250 184 29.9 47.4 50156-1050 1135 1300 184 31.6 49.7 50156-1200 1285 10 184 35.5 55.6 50156-1350 1485 1650 184 41.2 66.6 50156-1400 1535 1700 184 42.4 68.4 50156-1500 1635 1800 184.2 72.7 50156-10 1835 2000 184 50.9 83.7 50156-1800 2035 2200 184 56.0 91.9 PAGE 8
SINGLE ROLL PLAIN & DISC FLAT RETURN SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 25161-0750 846 1000 25 8.7 15.5 25161-0800 896 1050 25 9.1 16.2 25161-0900 996 1150 25 10.0 18.9 25161-1000 1096 1250 25 10.9 20.5 25161-1050 1146 1300 25 11.4 21.3 25161-1200 1296 10 25 12.8 23.6 25161-1350 1496 1650 25 14.6 29.0 25161-1400 1546 1700 25 15.1 29.8 25161-1500 1646 1800 25 16.0 31.6 25161-10 1846 2000 25 17.8 35.1 25161-1800 2046 2200 25 19.7 41.5 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 40161-0750 852 1000 51 16.6 25.0 40161-0800 902 1050 51 17.5 27.5 40161-0900 1002 1150 51 19.2 30.0 40161-1000 1102 1250 51 20.9 32.6 40161-1050 1152 1300 51 21.8 33.8 40161-1200 1302 10 51 24.3 39.5 40161-1350 1502 1650 51 27.8 44.9 40161-1400 1552 1700 51 28.6 46.2 40161-1500 1652 1800 51 30.4 48.9 40161-10 1852 2000 51 33.8 57.2 40161-1800 2052 2200 51 37.2 62.8 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 30161-0750 849 1000 38 13.8 20.6 30161-0800 899 1050 38 14.6 21.6 30161-0900 999 1150 38 16.0 24.9 30161-1000 1099 1250 38 17.5 27.1 30161-1050 1149 1300 38 18.2 28.1 30161-1200 1299 10 38 20.4 31.4 30161-1350 1499 1650 38 23.3 37.7 30161-1400 1549 1700 38 24.0 38.8 30161-1500 1649 1800 38 25.5 41.1 30161-10 1849 2000 38 28.4.7 30161-1800 2049 2200 38 31.3 53.2 161-0750 850 1000 38 14.1 25.1 161-0800 900 1050 38 14.8 26.3 161-0900 1000 1150 38 16.3 28.7 161-1000 1100 1250 38 17.8 31.1 161-1050 1150 1300 38 18.5 32.3 161-1200 1300 10 38 20.7 36.0 161-1350 1500 1650 38 23.6 40.8 161-1400 1550 1700 38 24.3 44.5 161-1500 1650 1800 38 25.8 47.0 161-10 1850 2000 38 28.7 52.2 161-1800 2050 2200 38 31.6.8 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 35161-0750 852 1000 38 14.0 22.4 35161-0800 902 1050 38 14.8 23.5 35161-0900 1002 1150 38 16.2 27.0 35161-1000 1102 1250 38 17.7 29.3 35161-1050 1152 1300 38 18.4 30.4 35161-1200 1302 10 38 20.6 33.9 35161-1350 1502 1650 38 23.5 40.6 35161-1400 1552 1700 38 24.2 41.8 35161-1500 1652 1800 38 25.7 44.2 35161-10 1852 2000 38 28.6 52.0 35161-1800 2052 2200 38 31.5 57.1 50161-0750 850 1000 51 24.5 35.5 50161-0800 900 1050 51 25.8 37.2 50161-0900 1000 1150 51 28.3 40.7 50161-1000 1100 1250 51 30.9 44.2 50161-1050 1150 1300 51 32.2 46.0 50161-1200 1300 10 51 36.0 51.3 50161-1350 1500 1650 51 41.1.6 50161-1400 1550 1700 51 42.4 62.5 50161-1500 1650 1800 51 44.9 66.1 50161-10 1850 2000 51 50.0 73.5 50161-1800 2050 2200 51 55.1 84.2 PAGE 9
SINGLE ROLL PLAIN & DISC FLAT RETURN SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 54161-0750 852 1000 38 14.4 26.8 54161-0800 902 1050 38 15.1 28.1 54161-0900 1002 1150 38 16.6 30.7 54161-1000 1102 1250 38 18.0 33.2 54161-1050 1152 1300 38 18.7 34.5 54161-1200 1302 10 38 20.9 38.4 54161-1350 1502 1650 38 23.9 43.5 54161-1400 1552 1700 38 24.6 44.8 54161-1500 1652 1800 38 26.0 50.2 54161-10 1852 2000 38 29.0 55.7 54161-1800 2052 2200 38 31.9 61.2 59161-0750 852 1000 51 24.7 37.2 59161-0800 902 1050 51 26.0 39.0 59161-0900 1002 1150 51 28.6 42.7 59161-1000 1102 1250 51 31.1 46.4 59161-1050 1152 1300 51 32.4 48.2 59161-1200 1302 10 51 36.2 55.9 59161-1350 1502 1650 51 41.3 63.6 59161-1400 1552 1700 51 42.5 68.3 59161-1500 1652 1800 51.1 72.3 59161-10 1852 2000 51 50.2 82.6 59161-1800 2052 2200 51 55.2 90.9 SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 SERIES ROLL DIAMETER 178 BEARING SIZE 6309 55161-1000 1102 1250 38 18.2 37.5 55161-1050 1152 1300 38 19.0 38.9 55161-1200 1302 10 38 21.2 43.3 55161-1350 1502 1650 38 24.1 49.1 55161-1400 1552 1700 38 24.8 50.6 55161-1500 1652 1800 38 26.3 53.5 55161-10 1852 2000 38 29.2 61.7 55161-1800 2052 2200 38 32.1 67.8 161-1000 1102 1250 51 31.4 50.6 161-1050 1152 1300 51 32.6 52.6 161-1200 1302 10 51 36.5 58.6 161-1350 1502 1650 51 41.6 66.6 161-1400 1552 1700 51 42.8 68.6 161-1500 1652 1800 51.4 72.6 161-10 1852 2000 51 50.5 83.6 161-1800 2052 2200 51 55.3 97.7 SERIES ROLL DIAMETER 152 DISC BEARING SIZE 6307 CODE NUMBER A B E F G H MASS Kgs 162-00 685 850 38 153 675 14.2 23.7 162-0650 735 900 38 153 725 14.8 24.7 162-0750 835 1000 38 153 825 16.6 27.5 162-0800 885 1050 38 153 875 17.1 28.5 162-0900 985 1150 38 153 975 18.9 31.3 162-1000 1085 1250 38 153 1075 20.7 34.1 162-1050 1135 1300 38 153 1125 21.3 35.1 162-1200 1285 10 38 153 1275 23.7 38.9 162-1350 1485 1650 38 153 1425 26.6 43.8 162-1400 1535 1700 38 153 1475 27.2 44.8 162-1500 1635 1800 38 204 1575 29.6 50.9 162-10 1835 2000 38 204 1675 32.6 56.0 162-1800 2035 2200 38 204 1875 35.5 61.2 SERIES 50 ROLL DIAMETER 178 DISC BEARING SIZE 6307 CODE NUMBER A B E F G H MASS Kgs 50162-00 685 850 51 153 675 16.5 26.0 50162-0650 735 900 51 153 725 17.1 27.1 50162-0750 835 1000 51 153 825 19.2 30.1 50162-0800 885 1050 51 153 875 19.8 31.2 50162-0900 985 1150 51 153 975 21.9 34.3 50162-1000 1085 1250 51 153 1075 24.1 37.3 50162-1050 1135 1300 51 153 1125 24.5 38.4 50162-1200 1285 10 51 153 1275 27.2 42.5 50162-1350 1485 1650 51 153 1425 30.4 47.6 50162-1400 1535 1700 51 153 1475 31.0 51.1 50162-1500 1635 1800 51 204 1575 34.1 55.3 50162-10 1835 2000 51 204 1675 37.3.8 50162-1800 2035 2200 51 204 1875 40.5 66.2 PAGE 10
SINGLE ROLL PLAIN P/A RETURN TRAINER SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 CODE NUMBER A B C D E F MASS Kgs 25163-0750 846 1000 248 1080 34 8.7 52.5 25163-0800 896 1050 248 1130 34 9.1 54.0 25163-0900 996 1150 248 1230 34 10.0 58.3 25163-1000 1096 1250 248 1330 34 10.9 61.5 25163-1050 1146 1300 248 1380 34 11.4 63.0 25163-1200 1296 10 255 1530 34 12.8 68.8 25163-1350 1496 1650 277 1730 34 14.6 90.7 25163-1400 1546 1700 277 1780 34 15.1 92.7 25163-1500 1646 1800 298 1880 34 16.0 108.6 25163-10 1846 2000 298 2080 34 17.8 117.7 25163-1800 2046 2200 318 2280 34 19.7 140.4 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 CODE NUMBER A B C D E F MASS Kgs 40163-0750 852 1000 2 1080 59 16.6 65.0 40163-0800 902 1050 2 1130 59 17.5 68.2 40163-0900 1002 1150 2 1230 59 19.2 72.3 40163-1000 1102 1250 2 1330 59 20.9 76.5 40163-1050 1152 1300 2 1380 59 21.8 78.5 40163-1200 1302 10 267 1530 59 24.3 87.6 40163-1350 1502 1650 289 1730 59 27.8 110.0 40163-1400 1552 1700 289 1780 59 28.6 112.5 40163-1500 1652 1800 310 1880 59 30.4 130.0 40163-10 1852 2000 310 2080 59 33.8 143.9 40163-1800 2052 2200 330 2280 59 37.2 165.9 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 CODE NUMBER A B C D E F MASS Kgs 30163-0750 849 1000 248 1080 46 13.8 57.6 30163-0800 899 1050 248 1130 46 14.6 59.5 30163-0900 999 1150 248 1230 46 16.0 64.3 30163-1000 1099 1250 248 1330 46 17.5 68.1 30163-1050 1149 1300 248 1380 46 18.2 69.8 30163-1200 1299 10 255 1530 46 20.4 76.6 30163-1350 1499 1650 277 1730 46 23.3 99.4 30163-1400 1549 1700 277 1780 46 24.0 101.7 30163-1500 1649 1800 298 1880 46 25.5 118.1 30163-10 1849 2000 298 2080 46 28.4 128.3 30163-1800 2049 2200 318 2280 46 31.3 152.1 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 CODE NUMBER A B C D E F MASS Kgs 163-0750 850 1000 2 1080 46 14.1 65.1 163-0800 900 1050 2 1130 46 14.8 67.0 163-0900 1000 1150 2 1230 46 16.3 71.0 163-1000 1100 1250 2 1330 46 17.8 75.0 163-1050 1150 1300 2 1380 46 18.5 77.0 163-1200 1300 10 267 1530 46 20.7 84.1 163-1350 1500 1650 289 1730 46 23.6 105.9 163-1400 1550 1700 289 1780 46 24.3 110.8 163-1500 1650 1800 310 1880 46 25.8 128.1 163-10 1850 2000 310 2080 46 28.7 138.9 163-1800 2050 2200 330 2280 46 31.6 163.9 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 CODE NUMBER A B C D E F MASS Kgs SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 CODE NUMBER A B C D E F MASS Kgs 35163-0750 852 1000 2 1080 46 14.0 62.4 35163-0800 902 1050 2 1130 46 14.8 64.2 35163-0900 1002 1150 2 1230 46 16.2 69.3 35163-1000 1102 1250 2 1330 46 17.7 73.2 35163-1050 1152 1300 2 1380 46 18.4 75.1 35163-1200 1302 10 267 1530 46 20.6 82.0 35163-1350 1502 1650 289 1730 46 23.5 105.7 35163-1400 1552 1700 289 1780 46 24.2 108.1 35163-1500 1652 1800 310 1880 46 25.7 125.3 35163-10 1852 2000 310 2080 46 28.6 138.7 35163-1800 2052 2200 330 2280 46 31.5 1.2 50163-0750 850 1000 2 1080 59 24.5 75.5 50163-0800 900 1050 2 1130 59 25.8 77.9 50163-0900 1000 1150 2 1230 59 28.3 83.0 50163-1000 1100 1250 2 1330 59 30.9 88.1 50163-1050 1150 1300 2 1380 59 32.2 90.7 50163-1200 1300 10 267 1530 59 36.0 99.4 50163-1350 1500 1650 289 1730 59 41.1 125.7 50163-1400 1550 1700 289 1780 59 42.4 128.8 50163-1500 1650 1800 310 1880 59 44.9 147.2 50163-10 1850 2000 310 2080 59 50.0 1.2 50163-1800 2050 2200 330 2280 59 55.1 187.3 PAGE 11
SINGLE ROLL PLAIN P/A RETURN TRAINER SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 CODE NUMBER A B C D E F MASS Kgs 54163-0750 852 1000 2 1080 46 14.4 66.8 54163-0800 902 1050 2 1130 46 15.1 68.8 54163-0900 1002 1150 2 1230 46 16.6 73.0 54163-1000 1102 1250 2 1330 46 18.0 77.1 54163-1050 1152 1300 2 1380 46 18.7 79.2 54163-1200 1302 10 267 1530 46 20.9 86.5 54163-1350 1502 1650 289 1730 46 23.9 108.6 54163-1400 1552 1700 289 1780 46 24.6 111.0 54163-1500 1652 1800 310 1880 46 26.0 131.3 54163-10 1852 2000 310 2080 46 29.0 142.4 54163-1800 2052 2200 330 2280 46 31.9 164.3 SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 CODE NUMBER A B C D E F MASS Kgs 59163-0750 852 1000 2 1080 59 24.7 77.2 59163-0800 902 1050 2 1130 59 26.0 79.7 59163-0900 1002 1150 2 1230 59 28.6 85.0 59163-1000 1102 1250 2 1330 59 31.1 90.3 59163-1050 1152 1300 2 1380 59 32.4 92.9 59163-1200 1302 10 267 1530 59 36.2 104.0 59163-1350 1502 1650 289 1730 59 41.3 128.7 59163-1400 1552 1700 289 1780 59 42.5 134.6 59163-1500 1652 1800 310 1880 59.1 153.4 59163-10 1852 2000 310 2080 59 50.2 169.3 59163-1800 2052 2200 330 2280 59 55.2 194.0 SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 CODE NUMBER A B C D E F MASS Kgs 55163-1000 1102 1250 2 1330 46 18.2 81.4 55163-1050 1152 1300 2 1380 46 19.0 83.6 55163-1200 1302 10 267 1530 46 21.2 91.4 55163-1350 1502 1650 289 1730 46 24.1 114.2 55163-1400 1552 1700 289 1780 46 24.8 116.9 55163-1500 1652 1800 310 1880 46 26.3 134.6 55163-10 1852 2000 310 2080 46 29.2 148.4 55163-1800 2052 2200 330 2280 46 32.1 170.9 SERIES ROLL DIAMETER 178 BEARING SIZE 6309 CODE NUMBER A B C D E F MASS Kgs 163-1000 1102 1250 2 1330 59 31.4 94.5 163-1050 1152 1300 2 1380 59 32.6 97.3 163-1200 1302 10 267 1530 59 36.5 106.7 163-1350 1502 1650 289 1730 59 41.6 131.7 163-1400 1552 1700 289 1780 59 42.8 134.9 163-1500 1652 1800 310 1880 59.4 153.7 163-10 1852 2000 310 2080 59 50.5 169.7 163-1800 2052 2200 330 2280 59 55.3 200.8 PAGE 12
2 ROLL PLAIN & DISC VEE RETURN SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 25169-1200-00 648 10 51 1332 215 42 1308 283 31 1274 354 13.6 33.4 25169-1350-00 724 1650 49 1483 231 37 17 308 24 1421 388 15.0 41.8 25169-1400-00 741 1700 48 1517 233 36 1491 312 21 14 394 15.4 42.6 25169-1500-00 792 1800 48 1619 248 36 1591 332 21 1552 420 16.4 48.4 25169-10-00 842 2000 44 1718 265 27 1690 358 7 1649 4 17.2.8 25169-1800-00 939 2200 44 1912 274 26 1881 376 5 1836 481 19.0 66.4 25169-2000-00 1044 2400 44 2121 301 27 2088 411 6 2039 526 21.0 84.3 25169-2200-00 1144 20 44 2320 309 27 2285 429 5 2232 553 22.8 90.8 25169-2400-00 1244 2800 44 2519 318 26 2482 446 4 2425 580 24.6 97.2 25169-2500-00 1303 2900 44 2637 342 28 2598 475 6 2539 613 25.6 125.6 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 169-10-00 846 2000 69 1741 265 53 1697 358 34 1654 4 28.2 73.1 169-1800-00 943 2200 69 1934 274 52 1888 376 32 1842 481 31.0 90.0 169-2000-00 1048 2400 69 2144 301 53 2095 411 32 2044 527 34.0 107.2 169-2200-00 1148 20 69 2343 309 52 2292 429 31 2240 554 37.0 115.4 169-2400-00 1246 2800 69 2538 318 52 2485 446 30 2427 580 39.8 123.3 169-2500-00 1307 2900 70 26 342 54 25 475 32 25 613 41.6 153.6 169-20-00 1346 3000 69 2737 346 51 2682 484 29 2620 626 42.8 158.1 169-2800-00 1446 3200 69 2937 354 51 2879 502 28 2813 653.6 167.7 169-3000-00 1548 3400 69 3140 363 51 3080 519 28 3010 680 48.6 182.4 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 30169-1200-00 651 10 63 1333 215 55 1307 283 43 1270 354 21.8 43.0 30169-1350-00 727 1650 61 1484 231 50 16 308 36 1417 388 24.0 50.8 30169-1400-00 744 1700 61 1518 233 49 1490 312 34 10 394 24.6 51.8 30169-1500-00 795 1800 61 1620 248 49 1590 332 33 1548 420 26.0 58.0 30169-10-00 8 2000 56 1719 265 40 1689 358 20 16 4 27.6 71.2 30169-1800-00 942 2200 56 1912 274 39 1880 376 18 1832 481 30.4 80.0 30169-2000-00 1047 2400 56 2121 301 40 2086 411 18 2035 526 33.4 96.9 30169-2200-00 1147 20 56 2320 309 39 2283 429 17 2228 553 36.4 104.4 30169-2400-00 1247 2800 56 2519 318 39 2480 446 16 2422 580 39.2 112.0 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 50169-10-00 846 2000 82 1739 265 66 1693 358 46 1647 4 48.8 93.7 50169-1800-00 943 2200 82 1932 274 65 1884 376 44 1835 481 53.8 112.8 50169-2000-00 1048 2400 82 2141 301 61 2097 411 2038 527 59.2 132.4 50169-2200-00 1148 20 82 2341 309 65 2288 429 44 2231 554 64.2 142.6 50169-2400-00 1246 2800 82 2536 318 65 2481 446 42 2420 580 69.2 152.9 50169-2500-00 1307 2900 83 2657 342 66 21 475 2538 613 72.4 184.4 50169-20-00 1346 3000 82 2735 346 64 2678 484 42 2613 626 74.4 189.7 50169-2800-00 1446 3200 82 2934 354 64 2875 502 41 2806 653 79.4 206.1 50169-3000-00 1548 3400 82 3138 363 64 3075 519 40 3003 680 84.6 218.4 30169-2500-00 1306 2900 57 2637 342 40 2597 475 18 2536 613 41.0 140.8 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 35169-10-00 848 2000 69 1743 265 53 1699 358 34 1656 4 28.0 67.7 35169-1800-00 9 2200 69 1936 274 52 1890 376 32 1843 481 30.8 86.8 35169-2000-00 1050 2400 70 2146 301 53 2097 411 33 2046 527 33.8 103.8 35169-2200-00 1150 20 69 23 309 53 2294 429 32 2239 554 36.8 111.6 35169-2400-00 1248 2800 69 2540 318 52 2487 446 30 2429 580 39.6 119.3 35169-2500-00 1309 2900 70 2662 342 54 27 475 33 2547 613 41.4 153.2 35169-20-00 1348 3000 69 2739 346 52 2684 484 29 2622 626 42.6 157.7 35169-2800-00 1448 3200 69 2939 354 51 2881 502 28 2815 653.4 167.3 35169-3000-00 1550 3400 69 3142 363 51 3082 519 28 3012 680 48.4 177.2 SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 54169-10-00 848 2000 69 1743 265 53 1699 358 34 1656 4 28.6 76.5 54169-1800-00 9 2200 69 1936 274 52 1890 376 32 1843 481 31.4 93.8 54169-2000-00 1050 2400 70 2146 301 53 2097 411 33 2046 527 34.6 111.4 54169-2200-00 1150 20 69 23 309 53 2294 429 32 2239 554 37.4 119.8 54169-2400-00 1248 2800 69 2540 318 52 2487 446 30 2429 580 40.4 128.1 54169-2500-00 1309 2900 70 2662 342 54 27 475 33 2547 613 42.0 158.6 54169-20-00 1348 3000 69 2739 346 52 2684 484 29 2622 626 43.2 163.1 54169-2800-00 1448 3200 69 2939 354 51 2881 502 28 2815 653 46.2 172.9 54169-3000-00 1550 3400 69 3142 363 51 3082 519 28 3012 680 49.2 183.2 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 40169-10-00 848 2000 82 1741 265 66 1695 358 46 1649 4 33.2 72.9 40169-1800-00 9 2200 82 1934 274 65 1886 376 1837 481 36.4 92.6 40169-2000-00 1050 2400 83 2143 301 66 2093 411 2039 527 40.0 110.0 40169-2200-00 1150 20 82 2343 309 65 2290 429 2233 554 43.4 118.4 40169-2400-00 1248 2800 82 2538 318 65 2483 446 43 2422 580 46.8 130.3 40169-2500-00 1309 2900 83 2659 342 67 23 475 2540 613 49.0 1.8 40169-20-00 1348 3000 82 2737 346 64 2680 484 42 2615 626 50.2 165.5 40169-2800-00 1448 3200 82 2936 354 64 2877 502 41 2808 653 53.8 175.5 40169-3000-00 1550 3400 82 3140 363 64 3077 519 41 3005 680 57.2 186.0 SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 55169-10-00 848 2000 69 1743 265 53 1699 358 34 1656 4 29.0 83.3 55169-1800-00 9 2200 69 1936 274 52 1890 376 32 1843 481 31.8 101.2 55169-2000-00 1050 2400 70 2146 301 53 2097 411 33 2046 527 35.0 119.6 55169-2200-00 1150 20 69 23 309 53 2294 429 32 2239 554 37.8 128.6 55169-2400-00 1248 2800 69 2540 318 52 2487 446 30 2429 580 40.8 137.5 55169-2500-00 1309 2900 70 2662 342 54 27 475 33 2547 613 42.6 168.4 55169-20-00 1348 3000 69 2739 346 52 2684 484 29 2622 626 43.6 173.3 55169-2800-00 1448 3200 69 2939 354 51 2881 502 28 2815 653 46.6 183.9 55169-3000-00 1550 3400 69 3142 363 51 3082 519 28 3012 680 49.6 194.6 00 Insert required Troughing Angle: 5, 10, or 15. PAGE 13
2 ROLL PLAIN & DISC VEE RETURN SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 59169-10-00 848 2000 82 1741 265 66 1695 358 46 1649 4 49.4 97.3 59169-1800-00 9 2200 82 1934 274 65 1886 376 1837 481 54.4 116.6 59169-2000-00 1050 2400 83 2143 301 66 2093 411 2039 527 59.6 136.6 59169-2200-00 1150 20 82 2343 309 65 2290 429 2233 554 64.8 147.0 59169-2400-00 1248 2800 82 2538 318 65 2483 446 43 2422 580 69.8 161.7 59169-2500-00 1309 2900 83 2659 342 67 23 475 2540 613 72.8 193.8 59169-20-00 1348 3000 82 2737 346 64 2680 484 42 2615 626 74.8 199.3 59169-2800-00 1448 3200 82 2936 354 64 2877 502 41 2808 653 80.0 211.7 59169-3000-00 1550 3400 82 3140 363 64 3077 519 41 3005 680 85.0 230.0 SERIES ROLL DIAMETER 178 BEARING SIZE 6309 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 169-10-00 848 2000 82 1741 265 66 1695 358 46 1649 4 49.8 103.9 169-1800-00 9 2200 82 1934 274 65 1886 376 1837 481 54.8 124.0 169-2000-00 1050 2400 83 2143 301 66 2093 411 2039 527.0 144.6 169-2200-00 1150 20 82 2343 309 65 2290 429 2233 554 65.2 155.8 169-2400-00 1248 2800 82 2538 318 65 2483 446 43 2422 580 70.2 167.1 SERIES ROLL DIAMETER 152 DISC BEARING SIZE 6307 169-2500-00 CODE NUMBER 1309 A 2900 B 83 2659 5 342 67 23 10 475 2540 15 613 E 73.2 199.2 MASS Kgs. 169-20-00 1348 3000 82 C 2737 D 346 F 64 C 2680 D 484 F 42 C 2615 D 626 F 75.2 R.P 204.9 169-2800-00 170-10-00 1448 831 3200 2000 82 68 2936 1704 354 265 64 50 2877 1661 502 358 41 29 2808 1619 653 4 80.4 31.6 217.7 76.5 169-3000-00 170-1800-00 1550 928 3400 2200 82 67 3140 1898 363 274 64 49 3077 1852 519 376 41 27 3005 1806 680 481 85.6 35.2 230.6 94.2 170-2000-00 1033 2400 68 2107 301 49 2059 411 28 2009 527 39.0 112.2 170-2200-00 1133 20 68 2306 309 49 2256 429 27 2204 554 41.2 119.6 170-2400-00 1231 2800 68 2501 318 49 2449 446 25 2391 580 44.8 128.3 170-2500-00 1292 2900 68 2623 342 50 2569 475 28 2509 613 46.2 158.2 170-20-00 1331 3000 67 2700 346 48 2646 484 24 2584 626 48.4 163.7 170-2800-00 1431 3200 67 2900 354 48 2843 502 23 2778 653 50.6 172.7 170-3000-00 1533 3400 68 3103 363 48 3044 519 23 2975 680 54.2 188.0 SERIES 30 ROLL DIAMETER 152 DISC BEARING SIZE 6307 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 30170-1200-00 633 10 61 1293 215 51 1267 283 38 1232 354 24.6 37.6 30170-1350-00 709 1650 59 1444 231 47 1417 308 31 1379 388 27.6.2 30170-1400-00 726 1700 59 1478 233 10 312 29 1411 394 28.0 46.0 30170-1500-00 777 1800 59 1580 248 1551 332 28 1510 420 30.4 52.6 30170-10-00 827 2000 54 1679 265 36 1649 358 15 17 4 31.6 64.8 30170-1800-00 924 2200 54 1872 274 35 1840 376 13 1794 481 35.2 71.0 30170-2000-00 1029 2400 54 2081 301 36 2047 412 13 1997 527 38.8 86.9 30170-2200-00 1129 20 54 2280 309 36 2244 429 12 2190 553 41.2 92.6 30170-2400-00 1229 2800 54 2479 318 36 2441 447 11 2383 580 44.8 99.4 SERIES 50 ROLL DIAMETER 178 DISC BEARING SIZE 6307 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 50170-10-00 831 2000 81 1702 265 62 1656 358 41 1612 4 36.4 81.3 50170-1800-00 928 2200 80 1895 274 62 1847 376 40 1799 481 40.6 99.6 50170-2000-00 1033 2400 81 2104 301 62 2054 411 40 2002 527 44.8 118.2 50170-2200-00 1133 20 81 2304 309 62 2251 429 39 2195 554 47.2 125.6 50170-2400-00 1231 2800 81 2499 318 61 2444 446 38 2384 580 51.2 134.9 50170-2500-00 1292 2900 81 2620 342 63 2564 475 40 2502 613 52.6 164.8 50170-20-00 1331 3000 80 2698 346 61 2641 484 37 2578 626 55.4 170.7 50170-2800-00 1431 3200 80 2897 354 61 2838 502 36 2771 653 57.8 179.7 50170-3000-00 1533 3400 81 3101 363 61 3039 519 35 2968 680 62.0 195.8 30170-2500-00 1288 2900 55 2597 341 37 2557 475 13 2497 613 46.0 127.0 SERIES ROLL DIAMETER 152 DISC BEARING SIZE 6307 CODE NUMBER A B 5 10 15 E MASS Kgs. C D F C D F C D F R.P 170-10-00 831 2000 68 1704 265 50 1661 358 29 1619 4 31.6 76.5 170-1800-00 928 2200 67 1898 274 49 1852 376 27 1806 481 35.2 94.2 170-2000-00 1033 2400 68 2107 301 49 2059 411 28 2009 527 39.0 112.2 170-2200-00 1133 20 68 2306 309 49 2256 429 27 2204 554 41.2 119.6 170-2400-00 1231 2800 68 2501 318 49 2449 446 25 2391 580 44.8 128.3 170-2500-00 1292 2900 68 2623 342 50 2569 475 28 2509 613 46.2 158.2 170-20-00 1331 3000 67 2700 346 48 2646 484 24 2584 626 48.4 163.7 170-2800-00 1431 3200 67 2900 354 48 2843 502 23 2778 653 50.6 172.7 170-3000-00 1533 3400 68 3103 363 48 3044 519 23 2975 680 54.2 188.0 00 Insert required Troughing Angle: 5, 10, or 15. PAGE 14
2 ROLL PLAIN SUSPENDED VEE RETURN SERIES Shackle Width CRS Bolt Size 25 25 30 M10 30 25 30 M10 35 28 M12 40 28 M12 39 M16 50 39 M16 SHACKLE WIDTH Note Consult your Prok representative for more details SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 10 15 10 15 R.P 25178-1200-00 648 669 62 123 1430 1405 13.6 20.9 25178-1350-00 724 7 75 142 1580 1552 15.0 24.7 25178-1400-00 741 762 78 147 1614 1585 15.4 25.1 25178-1500-00 792 813 87 1 1714 1683 16.4 26.7 25178-10-00 842 863 95 173 1813 1780 17.2 28.1 25178-1800-00 939 9 112 198 2004 1967 19.0 31.1 25178-2000-00 1044 1065 130 225 2210 2169 21.0 36.7 25178-2200-00 1144 1165 148 251 2407 2362 22.8 40.1 25178-2400-00 1244 1265 165 277 24 2555 24.6 43.1 25178-2500-00 1303 1324 175 292 2720 2669 25.6.1 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 10 15 10 15 R.P 40178-10-00 848 892 77 158 1904 1869 33.2 49.4 40178-1800-00 9 989 94 183 2095 2056 36.4 54.4 40178-2000-00 1050 1094 113 210 2302 2259 40.0 59.6 40178-2200-00 1150 1194 130 236 2499 22 43.4 68.2 40178-2400-00 1248 1292 147 262 2692 2641 46.8 73.4 40178-2500-00 1309 1353 158 277 2812 2759 49.0 76.6 40178-20-00 1348 1392 164 288 2889 2835 50.2 78.8 40178-2800-00 1448 1492 182 313 3086 3028 53.8 84.0 40178-3000-00 1550 1594 199 340 3287 3225 57.2 94.4 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 10 15 10 15 R.P 30178-1200-00 651 669 49 110 1430 1405 21.8 29.1 30178-1350-00 727 7 62 129 1580 1552 24.0 33.7 30178-1400-00 744 762 65 134 1614 1585 24.6 34.3 30178-1500-00 795 813 74 147 1714 1683 26.0 36.3 30178-10-00 8 863 83 1 1813 1780 27.6 38.5 30178-1800-00 942 9 100 185 2004 1967 30.4 42.3 30178-2000-00 1047 1065 118 212 2210 2169 33.4 49.3 30178-2200-00 1147 1165 135 238 2407 2362 36.4 53.5 30178-2400-00 1247 1265 152 264 24 2555 39.2 57.9 30178-2500-00 1306 1324 163 279 2720 2669 41.0.3 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 10 15 10 15 R.P 178-1200-00 652 698 57 122 1522 1494 22.4 38.2 178-1350-00 728 774 70 141 1672 1641 24.6 41.8 178-1400-00 7 791 73 146 1705 1674 25.2 42.6 178-1500-00 796 842 82 159 1806 1772 26.6.0 178-10-00 846 892 91 172 1904 1869 28.2 47.6 178-1800-00 943 989 108 197 2095 2056 31.0 52.2 178-2000-00 1048 1094 126 224 2302 2259 34.0 57.2 178-2200-00 1148 1194 143 250 2499 22 37.0 62.2 178-2400-00 1246 1292 1 275 2692 2641 39.8 66.8 178-2500-00 1307 1353 171 291 2812 2759 41.6 74.0 178-20-00 1346 1392 178 301 2889 2835 42.8 76.0 178-2800-00 1446 1492 195 327 3086 3028.6 81.2 178-3000-00 1548 1594 213 353 3287 3225 48.6 86.4 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 10 15 10 15 R.P 35178-10-00 848 892 91 172 1904 1869 28.0 44.2 35178-1800-00 9 989 108 197 2095 2056 30.8 48.6 35178-2000-00 1050 1094 126 224 2302 2259 33.8 53.4 35178-2200-00 1150 1194 143 250 2499 22 36.8 61.4 35178-2400-00 1248 1292 1 275 2692 2641 39.6 66.2 35178-2500-00 1309 1353 171 291 2812 2759 41.4 69.0 35178-20-00 1348 1392 177 301 2889 2835 42.6 71.0 35178-2800-00 1448 1492 195 327 3086 3028.4 75.8 35178-3000-00 1550 1594 213 353 3287 3225 48.4 85.6 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 10 15 10 15 R.P 50178-1200-00 652 698 44 108 1522 1494 39.0 54.6 50178-1350-00 728 774 57 128 1672 1641 42.8.0 50178-1400-00 7 791 132 1705 1674 43.6 61.2 50178-1500-00 796 842 69 1 1806 1772 46.2 64.8 50178-10-00 846 892 78 158 1904 1869 48.8 68.2 50178-1800-00 943 989 94 183 2095 2056 53.8 75.0 50178-2000-00 1048 1094 113 211 2302 2259 59.2 82.4 50178-2200-00 1148 1194 130 236 2499 22 64.2 89.4 50178-2400-00 1246 1292 147 262 2692 2641 69.2 100.2 50178-2500-00 1307 1353 158 278 2812 2759 72.4 104.8 50178-20-00 1346 1392 164 288 2889 2835 74.2 107.6 50178-2800-00 1446 1492 182 314 3086 3028 79.4 115.0 50178-3000-00 1548 1594 199 340 3287 3225 84.6 122.4 REFER TO PAGE 19 OF THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT 00 Insert required Troughing Angle: 5, 10, or 15. PAGE 15
2 ROLL PLAIN SUSPENDED VEE RETURN SERIES Shackle Width CRS Bolt Size 54 34 M16 59 34 M16 SHACKLE WIDTH Note Consult your Prok representative for more details SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 10 15 10 15 R.P 54178-10-00 848 892 92 174 1918 1882 28.6 51.3 54178-1800-00 9 989 109 199 2109 2070 31.4 56.3 54178-2000-00 1050 1094 127 226 2316 2272 34.6 61.7 54178-2200-00 1150 1194 144 252 2513 2466 37.4 66.9 54178-2400-00 1248 1292 161 277 2706 2655 40.4 71.9 54178-2500-00 1309 1353 177 293 2826 2773 42.0 75.1 54178-20-00 1348 1392 179 303 2903 2848 43.2 77.1 54178-2800-00 1448 1492 196 329 3100 3041 46.2 87.1 54178-3000-00 1550 1594 214 355 3301 3238 49.2 92.7 SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 10 15 10 15 R.P 59178-10-00 848 892 79 1 1918 1882 49.4 72.1 59178-1800-00 9 989 96 185 2109 2070 54.4 79.1 59178-2000-00 1050 1094 114 212 2316 2272 59.6 90.5 59178-2200-00 1150 1194 131 238 2513 2466 64.8 98.1 59178-2400-00 1248 1292 148 264 2706 2655 69.8 105.7 59178-2500-00 1309 1353 164 279 2826 2773 72.8 114.9 59178-20-00 1348 1392 166 289 2903 2848 74.8 118.1 59178-2800-00 1448 1492 183 315 3100 3041 79.8 126.1 59178-3000-00 1550 1594 201 342 3301 3238 85.0 134.3 SERIES Shackle Width CRS Bolt Size 55 Note Note Note Note Note Consult your Prok representative for more details SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 10 15 10 15 R.P 55178-10-00 848 892 92 174 1918 1882 29.0 58.3 55178-1800-00 9 989 109 199 2109 2070 31.8 63.9 55178-2000-00 1050 1094 127 226 2316 2272 35.0 70.1 55178-2200-00 1150 1194 144 252 2513 2466 37.8 75.9 55178-2400-00 1248 1292 161 277 2706 2655 40.8 81.5 55178-2500-00 1309 1353 177 293 2826 2773 42.6 85.1 55178-20-00 1348 1392 179 303 2903 2848 43.6 87.5 55178-2800-00 1448 1492 196 329 3100 3041 46.6 93.3 55178-3000-00 1550 1594 214 355 3301 3238 49.6 103.1 SERIES ROLL DIAMETER 178 BEARING SIZE 6309 10 15 10 15 R.P 178-10-00 848 892 79 1 1918 1882 49.8 78.9 178-1800-00 9 989 96 185 2109 2070 54.8 86.7 178-2000-00 1050 1094 114 212 2316 2272.0 95.1 178-2200-00 1150 1194 131 238 2513 2466 65.2 103.1 178-2400-00 1248 1292 148 264 2706 2655 70.2 111.1 178-2500-00 1309 1353 159 279 2826 2773 73.2 115.9 178-20-00 1348 1392 166 289 2903 2848 75.2 119.1 178-2800-00 1448 1492 183 315 3100 3041 80.4 127.1 178-3000-00 1550 1594 201 342 3301 3238 85.6 139.1 REFER TO PAGE 19 OF THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT 00 Insert required Troughing Angle: 5, 10, or 15. PAGE 16
3 ROLL SUSPENDED CARRY & IMPACT SERIES Shackle Width CRS @ 35 CRS @ Bolt Size 25 25 30 35 M10 30 25 30 M10 35 28 M12 40 28 M12 34 50 M16 50 34 50 M16 54 39 50 M16 59 39 50 M16 Note Consult your Prok representative for more details SERIES 25 ROLL DIAMETER 127 BEARING SIZE 6305 20 30 35 20 30 35 R.P 25174-0750-00 280 301 59 116 143 194 1005 954 919 851 10.5 16.0 25174-0800-00 296 317 65 124 152 205 1051 997 961 889 10.8 16.6 25174-0900-00 333 354 77 142 173 231 1157 1098 1059 979 11.7 18.1 25174-1000-00 3 381 87 156 189 250 1235 1172 1130 1044 12.6 19.3 25174-1050-00 385 406 95 168 203 268 1307 1240 1196 1104 13.2 20.5 25174-1200-00 438 9 113 195 233 305 19 1385 1336 1232 14.7 24.1 25174-1350-00 490 511 131 221 263 341 19 1527 1474 1358 16.2 26.5 25174-1400-00 496 517 133 224 266 3 1627 1543 1490 1372 16.2 26.8 25174-1500-00 543 564 149 247 293 378 1762 1672 1614 1486 17.7 28.9 25174-10-00 563 584 156 257 305 392 1820 1726 1667 1534 18.0 29.8 25174-1800-00 627 648 178 289 341 438 2004 1901 1836 1688 19.8 34.9 SERIES ROLL DIAMETER 152 BEARING SIZE 6307 20 30 35 20 30 35 R.P 174-0750-00 284 330 63 127 156 213 1136 1079 1042 962 17.4 30.3 174-0800-00 298 344 67 134 164 223 1177 1117 1079 996 18.0 31.5 174-0900-00 337 383 81 153 187 251 1289 1223 1182 1090 19.8 34.2 174-1000-00 364 410 90 167 202 270 1367 1297 1253 1155 21.0 36.3 174-1050-00 389 435 98 179 217 288 1439 1365 1319 1216 22.2 38.1 174-1200-00 442 488 117 206 247 325 1592 1510 19 1344 24.3 42.0 174-1350-00 494 540 134 232 277 362 1741 1652 1596 1469 26.7.6 174-1400-00 500 546 136 235 280 366 1758 1669 1612 1484 27.0 46.2 174-1500-00 547 593 152 258 307 399 1894 1797 1736 1597 29.1 49.5 174-10-00 567 613 159 268 319 413 1951 1852 1788 16 30.0 51.0 174-1800-00 631 677 181 300 355 9 2135 2026 1957 1800 32.7 55.5 174-2000-00 706 752 207 338 398 512 2352 2232 2155 1981 36.0 61.2 SERIES 30 ROLL DIAMETER 152 BEARING SIZE 6305 20 30 35 20 30 35 R.P 30174-0750-00 283 301 46 104 130 186 1005 954 919 869 16.8 22.3 30174-0800-00 299 317 52 112 139 197 1051 997 961 907 17.4 23.2 30174-0900-00 336 354 64 130 1 223 1157 1098 1059 997 18.9 25.3 30174-1000-00 363 381 74 144 176 242 1235 1172 1130 1062 20.1 26.8 30174-1050-00 388 406 82 156 190 2 1307 1240 1196 1122 21.3 29.8 30174-1200-00 441 9 100 183 220 297 19 1385 1336 1250 23.7 33.1 30174-1350-00 493 511 119 209 250 333 19 1527 1474 1376 25.8 36.1 30174-1400-00 499 517 121 212 254 337 1627 1543 1490 1390 26.1 36.4 30174-1500-00 546 564 137 235 281 370 1762 1672 1614 1504 28.2 41.5 30174-10-00 566 584 144 2 292 384 1820 1726 1667 1552 29.1 42.7 30174-1800-00 630 648 166 277 329 430 2004 1901 1836 1706 31.8 46.9 174-2200-00 785 831 234 377 444 567 2579 2447 2364 2172 39.6 70.5 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 20 30 35 20 30 35 R.P 50174-0750-00 284 330 50 114 143 200 1136 1079 1042 962 30.3 43.2 50174-0800-00 298 344 54 121 151 210 1177 1117 1079 996 31.5 44.7 50174-0900-00 337 383 68 140 174 238 1289 1223 1182 1090 34.2 48.9 50174-1000-00 364 410 77 154 189 257 1367 1297 1253 1155 36.3 51.6 50174-1050-00 389 435 85 166 204 275 1439 1365 1319 1216 38.4 54.3 50174-1200-00 442 488 104 193 234 312 1592 1510 19 1344 42.3 59.7 50174-1350-00 494 540 121 219 264 349 1741 1652 1596 1469 46.2 65.4 50174-1400-00 500 546 123 222 267 353 1758 1669 1612 1484 46.8 66.0 50174-1500-00 547 593 139 2 294 386 1894 1797 1736 1597 50.4 70.8 50174-10-00 567 613 146 255 306 400 1951 1852 1788 16 51.9 72.9 SERIES 35 ROLL DIAMETER 152 BEARING SIZE 6306 20 30 35 20 30 35 R.P 35174-0750-00 286 330 63 127 156 211 1136 1079 1042 953 17.1 26.6 35174-0800-00 300 344 67 134 164 221 1177 1117 1079 987 17.7 27.5 35174-0900-00 339 383 81 153 187 249 1289 1223 1182 1081 19.5 29.9 35174-1000-00 366 410 90 167 202 268 1367 1297 1253 1146 20.7 31.7 35174-1050-00 391 435 98 179 217 286 1439 1365 1319 1207 21.9 33.2 35174-1200-00 444 488 117 206 247 323 1592 1510 19 1335 24.3 36.8 35174-1350-00 496 540 134 232 277 3 1741 1652 1596 14 26.4 42.2 35174-1400-00 502 546 136 235 280 364 1758 1669 1612 1475 26.7 42.5 35174-1500-00 549 593 152 258 307 397 1894 1797 1736 1588 28.8.8 35174-10-00 569 613 159 268 319 411 1951 1852 1788 1636 29.7 47.0 35174-1800-00 633 677 181 300 355 7 2135 2026 1957 1791 32.4 54.5 35174-2000-00 708 752 207 338 398 510 2352 2232 2155 1972 35.7 59.9 35174-2200-00 787 831 234 377 444 565 2579 2447 2364 2163 39.0 65.6 50174-1800-00 631 677 168 287 342 446 2135 2026 1957 1800 56.7 79.8 50174-2000-00 706 752 194 325 385 499 2352 2232 2155 1981 62.4 90.9 50174-2200-00 785 831 221 364 431 554 2579 2447 2364 2172 68.4 99.6 SERIES 54 ROLL DIAMETER 152 BEARING SIZE 6308 20 30 35 20 30 35 R.P 54174-0750-00 286 330 65 130 1 216 1149 1091 1054 975 18.3 33.3 54174-0800-00 300 344 70 137 168 226 1190 1129 1091 1009 18.9 34.5 54174-0900-00 339 383 83 157 191 254 1302 1235 1194 1103 20.7 37.5 54174-1000-00 366 410 93 170 206 273 1380 1309 1265 1168 21.9 39.6 54174-1050-00 391 435 101 183 221 291 12 1377 1331 1229 22.8 41.4 54174-1200-00 444 488 119 209 251 328 15 1522 1471 1357 25.2.6 54174-1350-00 496 540 137 235 281 365 1754 1664 18 1482 27.6 49.5 54174-1400-00 502 546 139 238 284 369 1771 1681 1624 1497 27.6 50.1 54174-1500-00 549 593 155 262 311 402 1907 1809 1748 1610 29.7 53.7 54174-10-00 569 613 162 272 323 416 1964 1864 1800 1658 30.6 55.2 SERIES 40 ROLL DIAMETER 178 BEARING SIZE 6306 54174-1800-00 633 677 184 304 359 462 2148 2038 1969 1813 33.6.0 54174-2000-00 708 752 210 341 402 515 2365 2244 2167 1994 36.9 66.0 54174-2200-00 787 831 237 381 448 570 2592 29 2376 2185 40.2 76.2 20 30 35 20 30 35 R.P 40174-0750-00 286 330 50 114 143 198 1136 1079 1042 953 20.7 29.9 40174-0800-00 300 344 54 121 151 208 1177 1117 1079 987 21.3 31.1 40174-0900-00 339 383 68 140 174 236 1289 1223 1182 1081 23.4 33.8 40174-1000-00 366 410 77 154 189 255 1367 1297 1253 1146 24.9 35.6 40174-1050-00 391 435 85 166 204 273 1439 1365 1319 1207 26.1 37.4 40174-1200-00 444 488 104 193 234 310 1592 1510 19 1335 28.8 41.3 40174-1350-00 496 540 121 219 264 347 1741 1652 1596 14 31.5 47.3 40174-1400-00 502 546 123 222 267 351 1758 1669 1612 1475 31.8 47.6 40174-1500-00 549 593 139 2 294 384 1894 1797 1736 1558 34.2 51.2 40174-10-00 569 613 146 255 306 398 1951 1852 1788 1636 35.4 52.7 40174-1800-00 633 677 168 287 342 444 2135 2026 1957 1791 38.4.5 40174-2000-00 708 752 194 325 385 497 2352 2232 2155 1972 42.3 66.5 40174-2200-00 787 831 221 364 431 552 2579 2447 2364 2163 46.5 72.8 SERIES 59 ROLL DIAMETER 178 BEARING SIZE 6308 20 30 35 20 30 35 R.P 59174-0750-00 286 330 52 117 147 203 1149 1091 1054 975 31.2 46.2 59174-0800-00 300 344 57 124 155 213 1190 1129 1091 1009 32.1 47.7 59174-0900-00 339 383 70 144 178 241 1302 1235 1194 1103 35.1 51.9 59174-1000-00 366 410 80 157 193 2 1380 1309 1265 1168 37.2 54.9 59174-1050-00 391 435 88 170 208 278 12 1377 1331 1229 39.9 57.6 59174-1200-00 444 488 106 196 238 315 15 1522 1471 1357 43.2 63.6 59174-1350-00 496 540 124 222 268 352 1754 1664 18 1482 47.1 69.3 59174-1400-00 502 546 126 225 271 356 1771 1681 1624 1497 47.7 69.9 59174-1500-00 549 593 142 249 298 389 1907 1809 1748 1610 51.3 75.0 59174-10-00 569 613 149 259 310 403 1964 1864 1800 1658 52.5 80.1 59174-1800-00 633 677 171 291 346 449 2148 2038 1969 1813 57.6 87.6 59174-2000-00 708 752 197 328 389 502 2365 2244 2167 1994 63.3 96.3 59174-2200-00 787 831 224 368 435 557 2592 29 2376 2185 69.3 109.5 REFER TO PAGES 19 OF THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT 00 Insert required Troughing Angle: 20, 30, 35 or. PAGE 17
3 ROLL SUSPENDED CARRY & IMPACT SERIES Shackle Width CRS @ 35 CRS @ Bolt Size 55 Note Note 50 50 Note Note Note Consult your Prok representative for more details SERIES 55 ROLL DIAMETER 152 BEARING SIZE 6309 35 35 R.P 55174-1200-00 444 494 383 490 1857 1681 25.8 75.7 55174-1350-00 496 546 413 527 1995 1807 28.2 80.2 55174-1400-00 502 552 416 531 2010 1821 28.5 80.8 55174-1500-00 549 599 443 565 2134 1934 30.6 84.7 55174-10-00 569 619 5 579 2187 1983 31.2 86.5 55174-1800-00 633 683 491 624 2356 2137 34.2 92.9 55174-2000-00 708 758 534 677 2554 2318 37.5 98.8 55174-2200-00 787 837 580 733 2762 2509 40.8 105.7 55174-2400-00 848 898 615 776 2923 2656 43.5 111.1 55174-2500-00 873 923 629 794 2989 2716 44.7 116.5 SERIES ROLL DIAMETER 178 BEARING SIZE 6309 35 35 R.P 174-1200-00 444 494 370 477 1857 1681 43.8 93.7 174-1350-00 496 546 400 514 1995 1807 47.7 99.7 174-1400-00 502 552 403 518 2010 1821 48.3 100.6 174-1500-00 549 599 430 552 2134 1934 51.9 106.3 174-10-00 569 619 442 566 2187 1983 53.4 108.7 174-1800-00 633 683 478 611 2356 2137 58.2 116.2 174-2000-00 708 758 521 664 2554 2318 63.9 125.2 174-2200-00 787 837 567 720 2762 2509 69.9 134.8 174-2400-00 848 898 2 763 2923 2656 74.7 1.3 174-2500-00 873 923 616 781 2989 2716 76.5 148.6 SERIES ROLL DIAMETER 159 BEARING SIZE 6307 20 30 35 20 30 35 R.P 175-0750-00 286 330 59 123 153 210 1136 1079 1042 962 24.0 37.5 175-0800-00 300 344 64 130 161 220 1177 1117 1079 996 24.6 38.4 175-0900-00 339 383 77 150 184 248 1289 1223 1182 1090 27.3 42.0 175-1000-00 366 410 87 163 199 267 1367 1297 1253 1155 29.4.3 175-1050-00 391 435 95 176 213 279 1439 1365 1319 1216 31.8 48.0 SERIES Shackle Width CRS @ 35 CRS @ Bolt Size 34 34 50 50 M16 M16 Note Consult your Prok representative 50 for more details 175-1200-00 444 488 113 202 244 322 1592 1510 19 1344 34.8 52.8 175-1350-00 496 540 131 228 274 359 1741 1652 1596 1469 34 39.3 58.8 175-1400-00 502 546 133 231 277 363 1758 1669 1612 1484 39.6 59.1 175-1500-00 549 593 149 255 304 396 1894 1797 1736 1597 42.3 63.3 175-10-00 569 613 156 265 315 410 1951 1852 1788 16 44.4 66.0 175-1800-00 633 677 178 297 352 6 2135 2026 1957 1800 49.2 72.6 175-2000-00 708 752 204 334 395 509 2352 2232 2155 1981 54.6 80.1 175-2200-00 787 831 231 374 440 564 2579 2447 2364 2172.0 91.8 SERIES ROLL DIAMETER 159 BEARING SIZE 6307 20 30 35 20 30 35 R.P 175-0750-00 286 330 59 123 153 210 1136 1079 1042 962 24.0 37.5 175-0800-00 300 344 64 130 161 220 1177 1117 1079 996 24.6 38.4 175-0900-00 339 383 77 150 184 248 1289 1223 1182 1090 27.3 42.0 175-1000-00 366 410 87 163 199 267 1367 1297 1253 1155 29.4.3 175-1050-00 391 435 95 176 213 279 1439 1365 1319 1216 31.8 48.0 175-1200-00 444 488 113 202 244 322 1592 1510 19 1344 34.8 52.8 175-1350-00 496 540 131 228 274 359 1741 1652 1596 1469 39.3 58.8 175-1400-00 502 546 133 231 277 363 1758 1669 1612 1484 39.6 59.1 175-1500-00 549 593 149 255 304 396 1894 1797 1736 1597 42.3 63.3 175-10-00 569 613 156 265 315 410 1951 1852 1788 16 44.4 66.0 175-1800-00 633 677 178 297 352 6 2135 2026 1957 1800 49.2 72.6 175-2000-00 708 752 204 334 395 509 2352 2232 2155 1981 54.6 80.1 175-2200-00 787 831 231 374 440 564 2579 2447 2364 2172.0 91.8 SERIES 50 ROLL DIAMETER 178 BEARING SIZE 6307 20 30 35 20 30 35 R.P 50175-0750-00 286 330 50 114 143 200 1136 1079 1042 962 27.3 40.5 50175-0800-00 300 344 54 121 151 210 1177 1117 1079 996 27.6 41.4 50175-0900-00 339 383 68 140 174 238 1289 1223 1182 1090 30.9.6 50175-1000-00 366 410 77 154 189 257 1367 1297 1253 1155 33.3 49.2 50175-1050-00 391 435 85 166 204 275 1439 1365 1319 1216 36.0 52.5 50175-1200-00 444 488 104 193 234 312 1592 1510 19 1344 39.6 57.3 50175-1350-00 496 540 121 219 264 349 1741 1652 1596 1469 44.7 64.2 50175-1400-00 502 546 123 222 267 353 1758 1669 1612 1484.0 64.5 50175-1500-00 549 593 139 2 294 386 1894 1797 1736 1597 48.3 68.4 50175-10-00 569 613 146 255 306 400 1951 1852 1788 16 50.7 72.0 50175-1800-00 633 677 168 287 342 446 2135 2026 1957 1800 56.1 79.5 50175-2000-00 708 752 194 325 385 499 2352 2232 2155 1981 62.1 91.2 50175-2200-00 787 831 221 364 431 554 2579 2447 2364 2172 68.1 99.9 REFER TO PAGES 19 OF THIS CATALOGUE FOR VARIOUS METHODS OF ATTACHMENT 00 Insert required Troughing Angle: 20, 30, 35 or. PAGE 18
ACCESSORIES ROLL AD APT ORS READILY AVAILABLE TO SUIT MOST ALTERNATIVE BRANDS OF BASE FRAMES CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. STONE GU ARDS PROTECTS SEALS DURING WASH DOWN AVAILABLE IN GALVABOND. ACTS AS ROLL RETAINER CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. SUGGESTED SUSPENDED ROLL ATTACHMENT METHOD 1 READILY PERMITS IDLER TO BE TAKEN OUT OF SERVICE WHILST CONVEYOR IS RUNNING, FOR LATER REPLACEMENT DURING PLANNED DOWNTIME. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS OR RECOMMENDATION. ROLL RETAINERS RETAINER PLATES AVAILABLE FOR ALL SERIES PREVENTS ROLLS FROM DISLODGING IN A SEVERE STRUCTURAL VIBRATION ENVIRONMENT NO SPECIAL TOOLS REQUIRED RETAINER CLIPS AVAILABLE FOR ALL SERIES. MANUFACTURED FROM SPRING STEEL. POSITIVELY LOCKS THE ROLL ONTO THE FRAME. NO SPECIAL TOOLS REQUIRED. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. METHOD 2 RECOMMENDED FOR USE ON SUSPENDED IMPACT BED INSTALLATION. CUSHION PADS SHOULD BE USED FOR LARGE AND HIGH IMPACT LOAD CONDITIONS. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS OR RECOMMENDATION. METHOD 3 OFTEN USED FOR TROUGH AND VEE TYPE SUSPENDED IDLER INSTALLATION. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS OR RECOMMENDATION. IDLER A TROUGH SIDE GUIDE ROLL AVAILABLE IN VARIOUS DIAMETERS AND LENGTHS. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. METHOD 4 USED FOR TROUGH AND VEE TYPE RETURN ON SUSPENDED IDLERS. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS OR RECOMMENDATION. METHOD 5 RETURN SIDE GUIDE ROLL AVAILABLE IN VARIOUS DIAMETERS AND LENGTHS. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. DOUBLE SHACKLE MOUNTING USED FOR SUSPENDED IDLER RETURN APPPLICATIONS. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS OR RECOMMENDATION. METHOD 6 PR OK Belt Guide TM USED FOR TROUGH AND RETURN TYPE SUSPENDED IDLER APPPLICATIONS. THESE ARE VERY USEFUL FOR DIFFICULT BELT TRACKING SITUATIONS FOR FLAT OR TROUGHED BELT CONVEYORS. BRACKETS ARE HANDED TO BE USED IN PAIRS MOUNTED IN LINE ACROSS THE BELT. SEALED FOR LIFE CONSTRUCTION WITH ANTI-FRICTION BEARINGS. SIDE GUIDE IDLER FOR HEA VY DUTY WIDE BELTS PARTICULARLY USEFUL FOR PREVENTION OF TORSIONAL LOADS ON STRINGERS ARISING FROM HORIZONTAL BELT FORCES. PAGE 19
ACCESSORIES SUPERSENSITIVE TRAINER TM RUBBER DISC AND LAGGING AVAILABLE IN ALL SERIES, TROUGHING ANGLES AND BELT WIDTHS. FEATURES: IN-LINE PIVOT FOR INCREASED SENSITIVITY LINKAGE SYSTEM FOR SERVO ROLLS ENSURES CONSTANT GAP BETWEEN ROLLERS AND BELT EDGE, GIVING CLOSER CONTROL OF ACTION. ROBUST ANTI-FRICTION BEARING PIVOT ASSEMBLY. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. HEA VY DUTY PO WERED BELT TRAINING MODULE USED IN WIDE BELT APPLICATIONS WHERE TRAINING OF THE BELT IS A PROBLEM. SYSTEM CONSISTS OF A BANK OF LINKED TRAINERS THAT ARE CONTROLLED BY A POWERED ACTUATOR. Rubber disc rolls are utilised in a number of areas of a conveyor and can be supplied in various configurations and compounds. Impact Disc These rubber disc rolls are used in the impact or loading area of conveyors. The discs are designed to absorb the impact and to be resistant to excessive wear. A number of configurations are available for different applications culminating in the mighty bull nose rubbers for the really tough applications. Rubber discs are often used on return rolls for dirty belt applications. SMH can also supply rubber lagged rolls for this type of application. The rubber generally prevents material from building up on the roll. CONSULT YOUR NEAREST SMH OFFICE FOR FURTHER DETAILS. BULL NOSE IMPACTS PR OK PIVOT THE UNIT IS A LARGE DIAMETER INTERLOCKING PLATE BEARING THAT OVERCOMES A NUMBER OF POTENTIAL PROBLEMS IN TRADITIONAL BEARING ARRANGEMENTS. THIS BEARING UNIT, IN KEEPING WITH PROK GROUP S OBJECTIVES OF ONLY SUPPLYING PRODUCTS THAT MEET THE HIGHEST STANDARDS OF QUALITY. WILL PROVIDE TROUBLE FREE LONG LIFE FOR MOST DIFFICULT BEARING APPLICATION REQUIREMENTS IN THE HARSH OPERATING ENVIRONMENTS WE EXPERIENCE IN THE FIELD. THE BEARING UNIT CAN BE RETRO FITTED TO MOST EXISTING FRAMES LAGGED ROLL IMPACT DISCS SMH IMPACT STATIONS RUBBER DISCS TO SUIT ALL APPLICATIONS SMH impact stations can be designed to suit your particular applications and will only be recommended if it is the best solution to your needs. Our impact stations include hybrid beds that incorporate the use of impact rolls with the sealing capabilities of impact bars. The patented SMH impact bars present a controlled collapse and recovery which will absorb the full impact and not transmit the shock loading to the structure. This ability to absorb the impact helps to protect the conveyor belt from damage. This SMH design and installation will also ensure minimum wear to the underside of the belt. Below is a selection of rubber discs available from the SMH standard range. Manufactured to I.S.O. 3302 Standard and Tolerances. CODE No. B C 1651-133-0 133 52 1651-159-089 159 58 1651-178-089 178 58 Supplied in rubber or FRAS compound. CODE No. B C 1652-133-0 133 25 1652-159-089 159 39 1652-178-089 178 39 Supplied in rubber or FRAS compound. END IMPACT RUBBER FLANGED CENTRE IMPACT RUBBER UEST CODE No. B C 1654-159-089 159 42 1654-178-089 178 42 Supplied in rubber or FRAS compound. BULLNOSE IMPACT RUBBER Heavy Duty Retractable Idlers Allows rolls to be changed under loading skirt areas without removing adjacent idlers. No idler misalignment during roll change. Consult your nearest SMH office for further details or recommendations. CODE No. B C 1653-127-0 127 32 1653-152-089 152 52 1653-178-089 178 52 Supplied in rubber or FRAS compound. RETURN RUBBER DISC Jack Down TM Idler Rolls can be easily changed over in an impact area. The idler frame can be readily lowered for access purposes using a standard auto jack to enable roll replacement. Consult your nearest SMH Representative for further details. CODE No. B C 1657-159-089 159 52 1657-250-194 250 52 Supplied in Abrasion resistant rubber or Flame resistant chloroprene rubber. RETURN RUBBER DISC PAGE 20
ACCESSORIES ALUMINIUM PRODUCTS Sandvik Material Handling manufacture a range of these rolls for special applications.. Rolls are fitted with stainless outer seal. Aluminium frames can be supplied. Consult your nearest SMH Representative for further details. WINDGUARDS Manufactured from galvanised heavy gauge steel Rigid construction Slotted mounting holes for easy attachment Rolled safety edge Fluted for added strength Supplied complete with mounting bolts. GALVANISED PRODUCTS vided on request. Available in following sizes: A B 584 343 584 432 889 508 Large windguard for special applications. Consult your nearest SMH representative for specific recommendations. Available in following sizes: A B 1690 430 2000 430 Galvanised frames are available throughout our standard product range, and provide a durable long life coating for most applications. Fully galvanised roll shells can be provided on request. CONVEYOR EMERGENCY PULL WIRE SWITCH SYSTEM SMH can supply and install complete system for all conveyor applications. Pull wire switch is tested to SAA Code 1755-1986. Simple design ensures low maintenance. Robust non-metallic enclosure. Internal switch connections are fully shrouded for added safety during routine inspection. CHAMPION SKIRT CLAMP 2 The Sandvik Materials Handling Skirt Clamp can stop your skirt spillage now. The Champion Skirt Clamp system works well because its unique design concept is: Easy to Fit Easy to release and adjust Particularly user friendly in awkward or difficult areas Skirts can be adjusted easily by one man All parts are zinc plated for corrosion resistance (also supplied in stainless steel on request) Available ex-stock This is the complete system that protects your equipment and your products. Any skirt system must be user friendly to ensure that it will not work only on the day its installed but tomorrow, and for as long as necessary. The key is reliable and easy adjustment. Consult your nearest SMH representative for further details. CCESSORIES PAGE 21
WEIGH IDLERS WEIGH IDLER SPECIFICATION LEAD ON/OFF BELT SCALE IDLER SERIES: BELT WIDTH: INLINE/OFFSET: DIMENSIONS LEAD ON/OFF IDLER BELT-SCALE IDLER A MOUNTING HOLE CENTRES NOT APPLICABLE B MOUNTING HOLE CENTRES NOT APPLICABLE C MOUNTING HOLE CENTRES D INSIDE STRINGERS NOT APPLICABLE E ROLLING HEIGHT F ROLLER FACE G ROLLER DIAMETER H TROUGHING ANGLE J ROLLER PROFILE WIDTH K ROLLER PROFILE HEIGHT IF PROK STANDARD REQUIRED - PLEASE INDICATE IS THIS WEIGH STATION TO SUIT AN EXISTING CONVEYOR (YES/NO)?: IF YES, PLEASE PROVIDE THE PART NO. OF THE EXISTING TROUGH IDLER: STANDARD BALANCING AND MACHINING OF ROLLERS (0.014 Nm & 0.19 mm T.I.R.) (YES/NO)?: IF NO, PROVIDE DETAILS: Nm mm T.I.R. PROK STANDARD BROACHING ON ROLLS (YES/NO)?: IF NO, PLEASE PROVIDE DETAILS: A/F WIDTH Weigher Idlers These idlers are utilised as lead-in and lead-out assemblies to the belt weigh station. The roll shells are machined to fine tolerances on T.I.R. These roll and bases are manufactured to suit the most stringent weigher requirements. Available in all series and trough angles. Weighing Idlers These idlers are used in conjunction with the weighing beam or load cell. The roll shells are machined to fine tolerances and are accurately balanced. The rolls can be provided with adjusting screws at the spindle ends, to enable site adjustment of the profile. Available in all series and trough angles. SPECIAL REMARKS PAGE 22