2 0 1 7 D E F E Q U I P M E N T C ATA L O G 608-487-9770 www.hartlandlubes.com

TD1 Features & Benefits: Great performance and quiet operation Self priming Stainless steel motor shaft Polypropylene housing Reliable EPDM diaphragm Viton check valve Flow rate 6-9 GPM 115V 60Hz,.44 HP Operating pressure 1.6 bar (25PSI) TD1 The Titan TD1 is a self-priming, diaphragm style pump designed for cost effective use with drums, totes and via a wall mount system. Engineered and constructed to meet the rigors of dispensing DEF from industrial containers, this pump's universal mounting bracket is designed for optimal versatility. The TD1 can be set up in minutes; combined with the Titan High Flow Valve and Coupler system, it can systematically deliver pure DEF. Every TD1 will provide the customer with instant flow and filling rates above 6 GPM. This pump can be used in many different DEF applications and will provide excellent results. Whether dispensing from a drum or tote, the TD1 provides the end user with excellent flow of DEF at an affordable price. All pump systems come with a convenient nozzle hook and hose hanger. HLC Part# Part # Price Titan TD1 Diaphragm Pump System 104051 902-016-6 $407.78 TD1 Base, 20 ft Discharge, CS bracket, ManNozzle, Drum Mounting Kit, Coupler 104052 902-016-7 $550.00 TD1 Base, 20 ft Discharge, CS bracket, Auto Nozzle, Coupler 104053 902-016-8 $645.00 TD1 Base, 20 ft Discharge, CS bracket, Auto Nozzle, Flow Meter, Coupler Drum Mounting Kit 2

TD10 Features & Benefits: Reliable performance and quiet operation Available in 115V or 12V versions Unique Titan Micro Switch allows On Demand dispensing Integrated Titan Flow Meter Sturdy Powder Coated Bracket Enclosed Bracket for Protection From Harsher Environmental Conditions Flow rate 5-7 GPM TD10 Titan's TD10 is a reliable, workhorse design which provides the complete out of the box experience for the drum and tote user. The robust enclosed bracket design ensures protection from the harshest environmental conditions. Designed to provide the end-user with a complete closed system DEF dispensing experience, the TD10 is a simple and cost effective self-priming DEF pump solution. Take it out of the box and plug it in. hook it up to the drum or tote and you are ready for DEF dispensing. Rugged -- Strong -- Reliable! Part # Titan TD10 Diaphragm Pump Systems (Tote not included.) 902-028-0 TD10-115V, 20/4' Hoses, Auto Nozzle, CS Box, Integrated Flow Meter, Coupler 902-028-3 TD10-115V, 20/4' Hoses, Auto Nozzle, CS Bracket, Coupler 902-029-1 TD10-12V, 20/4' Hoses, Auto Nozzle, CS Box, Integrated Flow Meter, Coupler 902-029-3 TD10-12V, 20/4' Hoses, Auto Nozzle, CS Bracket, Coupler 902-029-4 TD10-12V, 20/4' Hoses, Auto Nozzle, CS Bracket, Flow Meter Non Stock Item Call for Pricing 3

TD12V Features & Benefits Reliable performance and quiet operation Self priming Light weight & portable Polypropylene housing Reliable EPDM diaphragm Viton check valve Flow rate 6-8 GPM 12 Volt, 1/3 HP TD12V The Titan TD12V diaphragm 12 Volt pump is built for use in mobile DEF operational platforms. Either on the back of a truck bed or out in the field, the TD12V provides optimal flexibility. End users will love using this pump because it is self priming, has excellent performance and time tested reliability. Our universal mounting bracket allows for simple set up on the user's desired container style or size. Once the bracket is securely mounted, connect the 12 volt external power source and you are ready to pump DEF. The Titan TD12V is perfect for all your off-road needs. HLC Part# Part # Price Titan TD12V Diaphragm Pump System 104054 902-018-4 $407.78 TD12V Base, 20'ft Discharge, CS bracket, Auto Nozzle 104055 902-018-9 $550.00 TD12V Base, 20 ft Discharge, CS bracket, Auto Nozzle, Coupler 104056 902-018-10 $645.00 TD12V Base, 20 ft Discharge, CS bracket, Auto Nozzle, Flow Meter, Coupler Drum Mounting Kit 4

Features & Benefits Self Priming Submersible Pump 10 ft. Dispense Hose ISO 22241 Compliant DEF Flow Rates to 5 GPM Integrated Nozzle Holder Built-in Nozzle Swivels for Ergonomic Use Built -in 15 min Timer (AC/DC Model only) Includes Replaceable Particulate Filter Universal Fit for Standard 55 Gal Drums Available with AC Adapter and 12V Clips or Rechargeable Lithium Battery (Drum not included) TED1 The Titan TED1 is the perfect and affordable solution for low volume shops and a better alternative to a manual hand pump when pumping from drums. HLC Part# Part # Price Titan TED 1 104464 902-031-0 $215.00 Titan Electric Drum Pump, AC/DC Adapter, 10 ft. hose, manual nozzle 104465 902-031-1 $240.00 Titan Electric Drum Pump, Lithium Battery, 10 ft. hose, manual nozzle AC/DC Model Equipped with Built-In Timer 5

Features & Benefits Piston Hand Pump Telescopic Suction Down Tube 10 ft. Dispense Hose Plastic Nozzle 2 NPT Drum Thread Polypropylene Body Flow Rate to 4 GPM Easy to Install Fits 55 Gallon Drum The open system includes: Manual lever style hand pump Down tube with a 2" NPS connection to the pump Plastic, manual nozzle 10 ftof Hose Power PE60 DEF hose TM1 The Titan TM1 is the perfect and affordable solution for low volume shops or as an emergency backup when an electric pump isn t an option. HLC Part# Part # Price Titan TM1 103507 902-014-1 $125.00 TM1, 10 ft. hose, manual nozzle, telescopic down tube 103508 902-014-2 $195.00 TM1, 10 ft. hose, manual nozzle, NRX Fill Coupler (Closed System) The closed system includes: Manual lever style hand pump Titan High Flow NRX Dispense and Fill Coupler Plastic, manual nozzle 10 ft of Hose Power PE60 DEF hose Optional: High Flow Valve & Down Tube for drum 6

Features & Benefits Works with Titan TD1 or TD12V Pumps Fits 55 Gallon Drum (not included) Accommodates 10 or 20 ft. Dispense Hose Closed, Secure System with Titan High Flow Valve and Coupler 16 Gauge Steel, Powder Coated Body Lockable Front Wheel Durable, Heavy Duty (Drum not included.) DRUM CART The Titan DEF drum cart is designed for extended service lift and easy use in a variety of operational environments. Our DEF drum carts feature a Titan diaphragm style DEF pump and up to 20 ft. of DEF hose. This is a complete, closed system that allows the end user to safely move a 55 gallon drum to the point of dispense. HLC Part# Part # Price Titan Drum Cart Pump Systems 103774 902-023-12 $1261.33 3 Whl Drum Cart - TD1 Pump, 20ft. Discharge, Auto Nozz, Flow Meter, Coupler, 55g Valve You may also need: 601-005-0 4 Pin Valve Install Tool 602-004-0 Tamper Evident Wire Seal 606-002-1 Replacement Back Wheel 606-002-2 Replacement Back Axle 606-002-3 Replacement Front Wheel Options 10 or 20 ft. hose Flow Meter TD1 TD12V 7

Features & Benefits TD12V Self-Priming Diaphragm Pump 20 ft. Dispense Hose 4 ft. Suction Hose Auto Shut Off Nozzle w/ Swivel Titan High Flow Valve Titan High Flow Dispense Coupler DEF Port will only accept DEF Nozzle Forklift Accessible for Easy Transport Lockable Lid for Complete Security Front View Strip for Fluid Level Visibility TPDU-M The Titan Portable Dispensing Unit (TPDU-M) is a DEF compliant, enclosed, secure mobile dispensing system. Our PE tank is ISO 22241compliant for use with DEF. The TPDU-M comes with an easy to lift, hinged lid that keeps equipment and DEF free from dust and debris and the locking arm keeps the lid open when in use. The TPDU-M has a tamper proof locking system for total security. This unique dispensing system is housed in heavy duty powder coated carbon steel with a rust resistant finish. The outside view strip allows operator to monitor DEF levels. Part # PDU Capacity Weight (LBS) Dimensions (LxDxH) Heated 904-020-2 20 Gallons 131 30x18x22 in No 904-060-2 60 Gallons 200 45x24x30 in No 904-100-2 100 Gallons 261 48x30x34 in No 8

Standard 110V Power Receptacle Temperature probe installed. Temperature control activated at 30 o F TPDU-M Heated The Titan heated PDU is insulated and fitted with a 120 vac 475 watt heating system that is designed to prevent the DEF from freezing in minimum ambient conditions down to -40⁰F (-40⁰C). The heating system consists of two low watt density, low profile, waterproof, pressure laminated heater pads. One heater pad is attached directly to the exterior of the polyethylene DEF Tank and the second heater pad is attached directly to the underside of the PDU Equipment Tray. The heaters are connected to an Electronic Temperature Controller that is also located on the underside of the PDU Tray. This Temperature Controller will automatically energize and de-energize both heaters based upon the ambient air temperature being monitored and measured inside of the PDU Enclosure. The entire heating system becomes functional when a 120vac power supply is plugged into the Power Receptacle on the side of the PDU enclosure. A 20 foot industrial grade extension cord is included with the system. The heating system will automatically switch on and remain switched on when the Temperature Controller is registering an ambient air temperature below 30⁰F (-1.1⁰C) inside of the PDU Enclosure. The heating system will automatically switch off and remain switched off during all time periods when the Temperature Controller is registering ambient air temperatures above 30⁰F (- 1.1⁰F) inside the PDU Enclosure. Part # PDU Capacity Weight (LBS) Dimensions (LxDxH) Heated 904-060-4 60 Gallons 235 45x24x30 in Yes 904-100-4 100 Gallons 296 48x30x34 in Yes 9

Features & Benefits TD12V or TD10 Self-Priming Pump 20 ft. Dispense Hose Rugged All-Poly Housing Molded Recesses for Tie Downs During Transport Integrated Nozzle Holder Auto Shut Off Nozzle w/ Swivel Forklift Recesses Integrated Carry Handles Lockable Lid for Complete Security TPDU-P Part # PDU Capacity Weight (LBS) Dimensions (LxDxH) 904-001-0 30 Gallons 60 32x24x18 in 904-002-0 50 Gallons 62 32x24x23 in 904-003-0 110 Gallons 130 46x30x29 in 904-004-0 155 Gallons 156 46x32x40 in 10

Features & Benefits Robust Double Wall Containment Outer Tank Holds 110% of Inner Tank Volume 6 GPM 120V Pump General Construction Inspection Approval Z-40321-510 Hinged, Lockable Lid Integral Sump Electronic Overfill Sensor Optical Bund Alarm 2 Dry Tanker Coupling Liquid Level Gauge Auto Nozzle and Nozzle Holder Fully Assembled and Pre-Wired Pulse Meter allows user to connect to most card reader systems. Extreme Cube includes a 500W internal probe heater to prevent DEF from freezing. CUBE Liquid Level Gauge Overfill Bund Alarm Internal Probe Heater Cube with pulse meter installed. Description Capacity (G) Ext Dimensions Weight (LB) Part # 905-025-3 Cube DEF Tank, Outdoor Premium, 25 ft. hose, reel, auto nozzle, flow meter, 400W heater 396 47x45x71 451 Part # 905-026-3 Cube DEF Tank, Outdoor Premium, 25 ft. hose, reel, auto nozzle, flow meter, 400W heater 660 47x71x71 584 Part # 905-025-7 Cube DEF Tank, Outdoor Premium, 25 ft. hose, reel, auto nozzle, pulse meter, 400W heater 396 47x45x71 451 Part # 905-026-7 Cube DEF Tank, Outdoor Premium, 25 ft. hose, reel, auto nozzle, pump meter, 400W heater Part # 905-026-8 Cube DEF Tank, Outdoor Extreme, 25 ft. hose, reel, auto nozzle, flow meter, 400W heater, 500W internal probe heater 660 47x71x71 584 660 47x71x71 584 11

Features & Benefits Veeder-Root EMR3 Custody Transfer Metering System State of the art precision counting for exceptional accuracy Non-volatile memory continuously stores the last 200 transactions made Weights & Measures flow meter with custody transfer accuracy NTEP approved Flow meter is UL, cul, ATEX and CE certified Automatic meter calibration Nitrogen purged back lighted display Easy operation Start / Finish Pump control Preset delivery Dispense with data link (wireless data capture) W&M CUBE Description Capacity (G) Ext Dimensions Weight (LB) Part # 905-027-1 Cube DEF Tank, Outdoor Premium, 25 ft. hose, reel, auto nozzle, flow meter, 400W heater, Weights & Measures Part # 905-027-0 Cube DEF Tank, Outdoor Premium, 25 ft. hose, reel, auto nozzle, flow meter, 400W heater, Weights & Measures 396 47x45x71 460 660 47x71x71 595 12

STOREMORE Features & Benefits Lower Valve Has Electrically Activated SS Ball Valve w/battery Fail Safe (close) Upon Power Loss Overfill Protection via Auto Shut Off Valve & Level Sensor High speed Fill Rate (40 GPM) No Assembly; No Site Preparation Required Robust Powder Coated Frame with All Electrics Prewired in NEMA 4 Box Durable, Space Saving Fuel Island Footprint Mini Bulk Solution at Economical Price Connect 2 or 3 with Titan Manifold and Run with 1 Pump Can Utilize All Titan DEF Pumps Dispense with Closed Titan High Flow Valve & Coupler Part # 905-002-0 13

Titan High Flow Dispense Coupler Part # 911-009-0 103227 $86.46 Design improvements allow for flow rates up to 23.5 gpm Heavy-duty handle with an audible click locking feature 4 Cam locking mechanism Integrated ¾ x 90 degree swivel barb connection Titan High Flow Fill Coupler Part # 221-401-0 103226 $86.46 Design improvements allow for flow rates up to 40 gpm Significant cost savings when compared to commonly used stainless steel fill heads 4 Cam locking mechanism NPT swivel outlet can accommodate adapters from ¾ to 2 VALVES & COUPLERS Titan High Flow Valve Part # 101-411-1 (275g) 101-411-2 (330g) 101-411-3 (55g) Optimized for performance that meets and exceeds DEF market demands Up to 20% better flow rate than the competition 4 Cam locking mechanism Secure and tamper evident ready Simple as Click. Pump. Go. Available with Viton gasket upon request 14

(Totes and Pump not included.) TTM The Titan Tote Manifold System (TTM) provides the end-user with a simple to install solution that links together totes in to a single pump suction point. No further need to move your pump around from tote to tote. The prepackaged kit comes assembled and ready to go after a few easy steps for installation. The TTM features a dual opening lid design with standardized 4-cam valves preinstalled for quick and easy refilling of each tote. The two hole cap replaces the current lid on your tote and is designed to incorporate your existing valve and coupler. Connect the TTM to the couplers and the pump and you re ready to dispense! Part # Titan Tote Manifold 911-075-2 Two Tote Manifold 911-075-3 Three Tote Manifold 15

DEF PUMP ACCESSORIES 103228 $194.45 911-001-1 Auto Nozzle w/3/4 barbed swivel 103488 $37.19 403-003-1 Plastic Nozzle w/locking pin, ¾ barbed connection 104255 $125.00 911-050-0 Flow Meter 103953 $76.84 403-009-5 20 Dispense Hose 103851 $115.28 403-021-5 30 Dispense Hose Titan ¾ DEF Dispense Hose designed specifically for dispensing DEF. Don t see your size? We can cut to specified lengths! Call us today! 104326 $28.92 403-010-4 4 Suction Hose Titan ¾ DEF Suction Hose reinforced with helix wire to prevent collapsing. Like our dispense hose, it is designed for DEF applications. Don t see your size? We can cut to specified lengths! Call us today! 104306 $28.00 501-002-0 103491 $93.68 601-003-0 SS Valve Install Tool 16