INTERNATIONAL APPLICATION CATALOGUE. Number 38 September PDF Free Download

INTERNATIONAL APPLICATION CATALOGUE Number 8 September 08

OME FEATURES SHOCK ABSORBERS LARGE BORE MM TWIN TUBE DESIGN - Allows greater oil volume for cooling and sustained valving performance and strong.6mm outer tube construction protects the vital internal components from damage. LARGE 8MM HARDENED CHROME PISTON ROD - Strong enough to handle any load or harsh conditions expected from your x. TRIPLE LIP CHECK VALVE OIL SEAL MK - The latest technology in oil seal design physically larger with quantum improvements in durability, oil and gas retention with much greater resistance to heat so it keeps working under the harshest conditions. TEFLON IMPREGNATED LOW FRICTION ROD GUIDE - The latest refinement in rod guide design further reduces heat build up and maintains performance. TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A new component that maintains consistent and uniform performance by providing a tight and uniform fit between the piston rod and rod guide. MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique and new valving system that features multiple disc valving control at the base of the shock and on both sides of the piston rod. This allows the OME engineers more valving options for better ride quality and handling control. MM HIGH FLOW TEFLON BANDED PISTON - New low friction design has less restrictive oil flow through the piston, reduces heat build up and aeration of the oil that leads to fade. VEHICLE SPECIFIC VALVING - OME shock absorber s performance stand head and shoulders over its competitors because many hours of OME engineering valving work have been put into each and every shock absorber to ensure our customers get the best ride and handling their vehicle can have. POLYETHYLENE DIRT SHIELD Impact resistant, polyethylene dirt shield provides additional protection from stone chips and off road debris. NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance. SUPPLEMENTARY WELDS - For strength and reliability, all mounts have supplementary welds. SHOCK ABSORBERS GIANT 8MM CHROMED SHAFT - Indestructible for Australia s rugged off roading. Induction hardened then hard chromed to a superfine finish. NITROGEN GAS - The gas pressure keeps the oil cohesive under all situations. TWIN TUBE DESIGN - % thicker outer tube insures that rocks do not damage internal operating components. This design also allows for a greater volume of oil which keeps shock cooler. MM SEVEN STAGE COMPRESSION VALVE - Delivers all the subtleties of compression rates for the best ride and handling. CHECK VALVE SEAL - The latest in seal technology, this shaft seal significantly improves gas retention whilst offering excellent longevity. GLACIER BUSH - A Teflon coated rod guide bush - significantly reduces heat build up in the rod guide area, developed from the Emu s off road racing programme. GIANT MM TEFLON BANDED PISTON - A new four stage coil sprung rebound valve system to control vehicle bounce. SUPPLEMENTARY WELDS - On all mounting eyes & pins for maximum shock absorber mount strength. STONEGUARD - Protects oil seal and piston rod against stone and dirt damage. COIL SPRINGS XK MICRO-ALLOYED SPRING STEEL New generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. SHOT PEENED To reduce stress, which greatly enhances spring life. DOUBLE SCRAGGED To eliminate spring sag. VARIABLE AND CONSTANT RATE - Designs used to obtain optimum ride comfort and load carrying capabilities. STEERING STABILISERS COIL SPRUNG 9 STAGE VALVING - For optimum performance. MM PISTON & BORE - Greater oil volume giving better damper performance. TWIN TUBE DESIGN - Protects the internal components against stone damage. STEEL STONEGUARD - Protects the piston rod against stone damage. FOAM CELL - Keeps the oil at the valving to prevent fade. ORIGINAL MOUNTS - All mounts are of similar design to original stabilisers for ease of fitment. LEAF SPRINGS FLAT AXLE SEAT AREA - Lowers spring stress whilst retaining spring free camber height. Unique to most OME springs. ANTI FRICTION INTER LEAF LINERS - Used where applicable to reduce friction between spring leaves giving better ride comfort and increased spring life. SHOT PEENED - On the tension side of all leaves to double spring life. DRAW TAPERED & DIAMOND CUT LEAVES - For reduced interleaf friction and improved load distribution in the load bearing area. GRAPHITE COATED - For further reduced friction. MILITARY WRAPPED - For extra safety (where fitment permits). LOOSE CLAMPED - For smooth & quiet operation. URETHANE BUSHES - LEAF SPRING PREMIUM GRADE - Not all bushes are the same - OME bushes are precision moulded in captive moulds to ensure exact tolerances for long bush life. SPLINES - Ensures the best fit by taking up irregularities in spring eyes. UNIQUE OME DESIGN - Clever lip seal and shoulder design prevents dirt penetrating between bush shoulder and shackle face. GREASABLE SHACKLES REDUCED WEAR - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling. ANTI INVERSION FACILITY - Built in feature on all LandCruiser greasable shackles. SERVICING - Simple & effective. WARRANTY: For a copy of ARB s Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website www.arb.com.au

CONTENTS PAGE GUIDE TO SELECTION. 8 SELECTION.... 9 S & STEERING STABILISER APPLICATIONS... COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE 8 LTR REMOTE CANISTER SELECTION...... 9 ARMOURED APPLICATION.. NISSAN PATROL Y6 -.T GVM 0 TOYOTA LANDCRUISER 00 SERIES -.T GVM 0 SUSPENSION APPLICATIONS CHRYSLER JEEP... COMMANDER XK 006 To 00 CHEROKEE XJ WAGON 98 To 00 CHEROKEE/LIBERTY KK 008 To 0 6 CHEROKEE/LIBERTY KJ 00 To 007 6 GRAND CHEROKEE WK 06 On GRAND CHEROKEE WK 0 To 0 GRAND CHEROKEE WH/WK 00 To 00 GRAND CHEROKEE WJ/WG 999 To 00 GRAND CHEROKEE ZJ 99 To 998 WRANGLER JK DOOR 006 On 9 WRANGLER JK DOOR 006 On 0 WRANGLER JK - OFF ROAD USE ONLY WRANGLER TJ & TJ UNLIMITED 997 To 006 7 WRANGLER YJ 986 To 996 8 FORD.... COURIER/RANGER TONNE 98 To 00 (not USA manufact. models) EVEREST 0 On EXPLORER 996 To 00 LEAF SPRING MODELS F0/F0 0 To 07 F0/F0 008 To 00 6 F0/F0 00 To 008 7 F0/F0 999 To 00 8 RANGER PX 0 On RANGER PJ/PK /006 To 0 (not USA manufact. models) HOLDEN / GM. COLORADO 0 On COLORADO RC 008 To 0 COLORADO 7 0 To 06/TRAILBLAZER 07 On DROVER (not USA manufactured model) GM ERA DOOR 999 To 6/00 0 GM ERA & DOOR UT MODELS 99 To 998 JACKAROO/TROOPER & MONTEREY /00 To 00 SWB & LWB 9 JACKAROO/TROOPER & MONTEREY 99 To /00 SWB & LWB 9 JACKAROO 98 To /99 0 RODEO RA 00 To 0 (not USA manufactured model) RODEO To 00 (not USA manufactured model) HUMMER.. HUMMER H OME INT CAT. NO.8 AUGUST 08

CONTENTS PAGE SUSPENSION APPLICATIONS (continued) HYUNDAI.. GALLOPER To 99 LEAF SPRING MODELS 9 GALLOPER 989 To 99 COIL SPRING MODELS 60 TERRACAN 00 On 6 ISUZU. DMAX 0 On DMAX 008 To 0 DMAX To 00 (not USA manufactured model) MU-X 0 On RODEO WAGON 999 To 6/00 (USA) 0 RODEO WAGON 99 To 998 (USA) TROOPER 98 To /99 0 KIA... SORENTO BL To 009 6 LADA.. NIVA 6 LAND ROVER.... 90 SERIES DEFENDER & COUNTY 0 9 DEFENDER 0 LONG TRAVEL 0 DEFENDER 0 DEFENDER 0 LONG TRAVEL DISCOVERY 00 On ALL COIL MODELS 7 DISCOVERY 999 To 00 ALL COIL SUSPENSION MODELS 7 DISCOVERY To 998 8 RANGE ROVER To /99 8 MAZDA... B SERIES TONNE 987 To 006 BT-0 0 On BT-0 TONNE /006 To 0 MERCEDES... G-WAGON G0 BLUETECH/G AMG MODELS 6 MITSUBISHI... CHALLENGER/MONTERO SPORT KH 00 On 6 CHALLENGER/MONTERO SPORT 000 To 008 LWB COIL MODELS 6 CHALLENGER V6 998 To 000 ( LEAF SPRING MODELS) 6 MONTERO SPORT 989 To 99 (USA) 60 MONTERO SPORT WAGON PA 998 To 000 ( LEAF SPRING MODELS) 6 PAJERO 007 On ALL LWB MODELS 7 PAJERO/MONTERO 000 To 006 ALL LWB MODELS 7 PAJERO/MONTERO 000 On ALL SWB MODELS 8 PAJERO/MONTERO 99 To 999 ALL SWB & LWB LEAF SPRING MODELS 8 PAJERO/MONTERO 99 To 999 ALL LWB COIL SPRING MODELS 9 PAJERO/MONTERO 99 To 999 ALL SWB COIL SPRING MODELS 9 PAJERO/MONTERO To 99 LEAF SPRING MODELS 9 OME INT CAT. NO.8 AUGUST 08

CONTENTS SUSPENSION APPLICATIONS (continued) MITSUBISHI (continued).. PAGE PAJERO CHALLENGER 989 To 99 COIL SPRING MODELS 60 TRITON/L00 MQ ALL X MODELS 60 TRITON/L00 ML & MN 006 To 0 6 TRITON/L00 MK 0/996 To 006 6 TRITON/L00 To 996 6 NISSAN.. IER 00 On (USA) 77 NAVARA D NP00 0 On 76 NP00 008 To 0 77 NAVARA D0 00 On 77 NAVARA D 0/00 On 77 NAVARA D & D To 8/00 78 PATHFINDER R 00 To 0 (not USA manufactured model) 78 PATHFINDER R0 996 To 00 V6 MODELS 79 PATHFINDER To Late 99 79 PATROL Y6 00 On (non HBMC models) 6 PATROL GU Y6 ALL LWB MODELS 67 PATROL Y60 & Y6 LWB - OFF ROAD USE ONLY 66 PATROL GU Y6 ALL SWB MODELS 68 PATROL GU Y6 ALL COIL CAB CHASSIS MODELS 69 PATROL GU Y6 CAB CHASSIS COIL: /LEAF: 70 PATROL GQ Y60 ALL SWB & LWB MODELS 7 PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS 7 PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS 7 PATROL MQ 60 LWB (SPANISH BUILT ALL.8TD MODELS) 7 PATROL MQ M60 7 TERRANO II R0 996 To 00 79 XTERRA 00 On MODELS 80 SSANGYONG.... KORANDO 99 To 00 8 MUSSO 99 To 00 8 SPORT UTILITY 99 To 00 8 SUZUKI... EQUATOR (USA) 8 GRAND VITARA 8/00 To 0 8 GRAND VITARA To 00 8 JIMNY SN 8 SIERRA/SAMURAI ALL LEAF SPRING MODELS (SJ) 8 SANTANA SAMURAI To 00 SWB & LWB MODELS 8 VITARA WAGON 988 To 00 V6 PETROL ENGINE MODEL 8 VITARA WAGON 988 To 00 CYLINDER PETROL ENGINE MODEL 8 VITARA SWB To 00 8 XL7 WAGON 00 To 00 8 OME INT CAT. NO.8 AUGUST 08

CONTENTS PAGE SUSPENSION APPLICATIONS (continued) TOYOTA.. RUNNER 00 On (USA) 6 RUNNER 00 To 00 (USA) 7 RUNNER/SURF 996 To 00 (USA) 7 RUNNER 990 To 996 (To 99 in USA) IFS COIL SPRING MODELS 8 RUNNER 986 To 990 (To 989 in USA) IFS LEAF SPRING MODELS 8 BUNDERA RJ70 /98 To 990 0 FJ CRUISER 00 On 96 FJ CRUISER 006 To 00 97 FORTUNER 0 On 97 FORTUNER 00 To 0 98 HILUX 0 On HILUX/VIGO 00 To 0 HILUX/TIGER 997 To 00 HILUX & RUNNER PRE 997 ALL LEAF SPRING MODELS HILUX PRE 997 EXTRA CAB & DUAL CAB SR IFS & LEAF MODELS LANDCRUISER 00 SERIES WAGON (not AHC models) 86 LANDCRUISER 00 SERIES INDEPENDENT SUSPENSION (not AHC models) 87 LANDCRUISER 0 SERIES WAGON LIVE AXLE SUSPENSION MODEL 88 LANDCRUISER 80 SERIES WAGON LIVE AXLE SUSPENSION MODEL 88 LANDCRUISER 80 SERIES & 0 SERIES - OFF ROAD USE ONLY 89 LANDCRUISER 79 SERIES SINGLE CAB (not GR-FE models) 0 LANDCRUISER 78 SERIES (not GR-FE models) 0 LANDCRUISER 76 SERIES WAGON 00 LANDCRUISER 7 SERIES (not GR-FE models) 0 LANDCRUISER 7 SERIES SWB & MWB 0 LANDCRUISER 7 SERIES SWB & MWB 0 LANDCRUISER 70 SERIES SWB & MWB 0 LANDCRUISER 70 SERIES DUAL CAB (not GR-FE models) 99 LANDCRUISER 6 SERIES 06 LANDCRUISER 6 SERIES 06 LANDCRUISER 60 SERIES 06 LANDCRUISER 7 SERIES ALL LWB MODELS 07 LANDCRUISER SERIES ALL LWB MODELS 07 LANDCRUISER SERIES SWB 08 LANDCRUISER 0 SERIES SWB 08 LANDCRUISER HZJ7 & HZJ7 To 007 SWB & MWB MODELS 0 LANDCRUISER II WAGON LWB 0 PRADO 0 SERIES 0/07 On LWB COIL SPRUNG MODELS ONLY 90 PRADO 0 SERIES 009 To 9/07 LWB COIL SPRUNG MODELS ONLY 9 PRADO 0 SERIES 009 On SWB COIL SPRUNG MODELS ONLY 9 PRADO 0 SERIES /00 To 009 LWB & SWB (not TEMS model) 9 PRADO 90 SERIES To 0/00 LWB 9 TACOMA 06 On 09 TACOMA V6 00 To 0 0 TACOMA V6 & CYLINDER 998 To 00 0 TUNDRA 007 On 9 VOLKSWAGEN. AMAROK 00 On 9 OME INT CAT. NO.8 AUGUST 08

CONTENTS TECHNICAL SPECIFICATIONS SUSPENSION BUSH KIT SELECTION..... DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS NUMERICAL SPRING & SHOCK / STRUT BUSH APPLICATIONS OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS SUSPENSION FITTING KITS ADDING OR REMOVING AN EXTRA LEAF... REPLACEMENT MAIN OR SECOND LEAF REPLACEMENT CENTRE BOLTS LEAF SPRING SERVICE PARTS U BOLTS... LEAF SPRING TRIM PACKERS CLIP LINER KITS FOR LEAF SPRINGS INTER-LEAF LINER KIT FOR LEAF SPRINGS LEAF SPRING CENTRE BOLT SLEEVES.. LEAF SPRING SPECIFICATIONS..... COIL SPRING SPECIFICATIONS...... SPECIFICATIONS.. SPECIFICATIONS.. SHOCK ABSORBER MOUNT TYPE TORSION BAR SPECIFICATIONS STEERING STABILISER SPECIFICATIONS.... RECOMMENDED FITTING TIMES ARB Corporation Limited, Old Man Emu Division P.O. Box 0 Kilsyth, Vic. 7 Australia. All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including photocopying, recording, taping or information systems) without the written permission of the publisher. PAGE 0 6 8 6 6 6 6 7 0 7 6 6 6 66 67 OME INT CAT. NO.8 AUGUST 08

Contents!A GUIDE TO SELECTION Terminologies & Explanations Please note most suspension development has been carried out on Australian specification models. Therefore, some differences may exist between the same model in another country. Overseas customers will need to make allowances for these possible differences. Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not require all items, eg. trimming kits, caster kits, all U bolts shown, etc. Actual individual vehicle requirements can only be determined when the suspension system is fitted. GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and tyre specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended. LOAD RATING - : Weights shown are maximum permissible loads with regard to accessories fitted, eg. Bull bar, winch, dual battery, etc. LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride and handling. : LIGHT LOAD: Full passenger load with luggage weights up to 0kg. MEDIUM LOAD: Full passenger load with luggage weight varying from 00kg to 0kg. CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring performance. Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications. LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. This amount can vary from vehicle to vehicle. OE: Original Equipment, as supplied by the manufacturer of the vehicle. SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*) indicates the shock absorber with the firmer ride. SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the flange area and regularly thereafter with OME polyurethane grease. STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 0/0 neutral valving. CASTER KIT: The OMECA77B, CALR and CALR kits consist of eccentric bushes which are pressed into the leading arms of the vehicle. This will induce positive caster into the front geometry. LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A" have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B' springs to the passenger side. COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication. GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eye bushes. TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning. VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height. VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height. VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle trimming problems and will increase ride height when fitted. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SELECTION ADVICE Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications. YEAR SELECTION Firm Valving The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle bounce over rough roads. If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads. Soft Valving Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can occur. A RECOMMENDATION FOR CUSTOMERS BUYING REPLACEMENT SHOCK ABSORBERS By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the original springs are also ready for replacement. It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to work a lot harder. Therefore, the life expectancy of the shock absorbers will be considerably shortened and, when loaded, ride and handling qualities will also be reduced. REMEMBER: A good set of shock absorbers will not overcome a bad set of springs. CHRYSLER JEEP VEHICLE DESCRIPTION STEERING STABILISERS 06 on Grand Cherokee WK 900 LHS 60 / 60 / 9006 RHS 606 / 607 0 to 0 Grand Cherokee WK 9006 60 / 60 / 606 / 607 999 to 00 Grand Cherokee WJ & WG 60087 60088 All Grand Cherokee ZJ 6009 6009 OMESD0 008 to 0 Cherokee/Liberty KK All Models 90009 60069 00 to 007 Cherokee/Liberty KJ ALL Models (OME Springs) 90009 60069 98 to 00 Cherokee XJ - Petrol & Diesel 600 600 OMESD0 9 006 on Wrangler JK All Models Off Road Use ONLY 60066M (mid Length) / 60066L (long) 60067L OMESD8 006 on Wrangler JK - All Models 60066 60067 OMESD8 997 to 006 Wrangler TJ *6007 / 6006 *6009 / 6008 0 OMESD0 9 986 to 996 Wrangler YJ 60098 60099 OMESD0 DAIHATSU 99 to 997 Feroza II F0 6000 N/A 988 to 99 Feroza I F00 6000 N/A 99 on Rocky F78 Wide Track 600 N/A OMESD '86 on FORD 0 on Everest *9000 7 / 9009 7 *60 6 / 60 6 0 on Ranger PX *9000 / 9009 *600 / 600 *600 / 600 /06 to 0 Ranger PJ/PK All Models 600 6 *600 / 600 0 to 07 F0 & F0 Diesel 60 / 60 60 008 to 00 F0 & F0 Diesel 60 / 60 60 98 to 00 Courier/Ranger Pick Up not USA manufactured model 600 600 987 to 99 Raider Wagon 600 600 All Maverick Wagon & Hard Top *600 / 60 *600 / 60 HOLDEN/ISUZU/CHEVY 07 on Trailblazer *900 7 / 900 7 0 on MU-X *900 7 / 900 7 0 to 06 Colorado 7 *900 7 / 900 7 0 on GM/Isuzu Pick Up Models Colorado / DMAX *900 7 / 900 7 008 to 0 GM/Isuzu Pick Up Models Colorado RC / DMAX 600 00 to 0 Rodeo Pick Up RA Models 600 OME SHOCKS & STRUTS *60 8 / 600 8 *60 8 / 600 8 *60 8 / 600 8 *607 / 606 *6006 / 600 *6006 / 600 To 8/89 OMESD 9/89 on OMESD6 Cont. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A YEAR HOLDEN/ISUZU/CHEVY (continued) 7/8 to 00 Rodeo/Isuzu Pick Up KB, KBD & TFS 600 99 to 00 Jackaroo/Trooper & Monterey (Isuzu Wagon) 600 /86 to /9 Jackaroo/Trooper 98 to 0/86 Jackaroo/Trooper 600 99 to 6/00 Frontera Wagon 600 99 to 998 Frontera UT 600 HUMMER 7/007 on H 9000 HYUNDAI To /99 Galloper (Rear Leaf Springs) 600 *6006 / 6007 989 to /9 Galloper (Rear Coil Springs) NF & NG 600 6006 00 on Terracan V6 6000 60060 00 on Terracan Diesel 6000 60060 STEERING STABILISERS LAND ROVER 999 to 00 Discovery Series II (Not Suitable for Airbag Models) 600 600 / 6006 OMESD0 99 to 999 Discovery Series I 6007 6009 / 6008 OMESD To /99 Range Rover (Not Suitable for Airbag Models) 6007 6009 / 6008 OMESD Defender / County 90 & 0 6007 8,9 6009 / 6008 OMESD 98 on Defender 0 6007 8,9 6009 OMESD Defender & County 0 & 0 Long Travel *60070 7,9 / 6008 7,9 *60070 7 / 6008 7 OMESD MAZDA 0 on SELECTION VEHICLE DESCRIPTION Mazda BT0 *9000 / 9009 006 to 0 Mazda BT0 All Models 600 987 to 006 B600 Pick Up All Models 600 MERCEDES G-Wagon G0 Bluetech / G AMG Models 60 MITSUBISHI 0 on Pajero Sport All Diesel Models 90008 9 007 on Pajero All LWB Models *90007 / 90006 007 on Pajero All SWB Models 90007 / 90006 000 to 0/06 Pajero All LWB Models *90007 / 90006 /00 to 006 Pajero/Montero NS, NM, NP & NT LWB & SWB 90007 / 90006 9 to /000 Pajero/Montero (R Coil Springs) NH, NJ, NK, NL (S/LWB) 6000 Pajero/Montero (R Leaf Springs) NH, NJ, NK, NL (S/LWB) 6000 989 to /9 Pajero/Montero Sport (Rear Coil Springs) NF & NG 600 To /99 Pajero/Montero (Rear Leaf Springs) NA, NB, NC, ND, NE, NF & NG 009 on Challenger/Montero Sport KH 90008 000 to 008 Challenger/Montero Sport (Rear Coil Springs) LWB 6000 998 to 000 Challenger V6/Montero Sport (R Leaf Springs) Wagon PA 6000 0 on Triton/L00 MQ All x Models 900 9 / 900 9 7/06 to 0 Triton/L00 ML & MN All Models 90008 0/96 to 6/06 Triton/L00 MK All Models 6000 99 to 9/96 Triton/L00 MJ All Models 600 9 to 8/96 Triton/L00 V6 (OE Springs) 600 0/86 to 99 Triton/L00 (V6 & Cylinder) ME, MF, MG, MH 600 To 986 L00 MA, MB, MC & MD 600 To 9/986 L00 Vans SA, SB, SC & SD 600 OME SHOCKS & STRUTS 6006 / 600 6007 *6006 8 / 60009 8 *6006 / 600 *6006 / 600 N/A 6007 *600 / 600 *600 / 600 *600 / 600 600 *6007 / 60076 600 / 6009 600 / 6009 600 / 6009 600 / 6009 600 *6006 / 6007 6006 600 *6006 / 6007 *6007 / 60076 6009 *6006 / 6007 *600 0 / 609 *609 / 608 6006 6000 6008 6007 6008 6008 600 NISSAN 00 on Patrol Y6 (Non HBMC Models) *900 / 900 6008, /00 on OMESD0 997 on Patrol Y6 (GU) LWB Off Road Use ONLY 600L 600L pre /00 OMESD 0/000 on Patrol Y6 (GU) SWB & Wagon 600 / 60 600 / 60 OMESD0 997 to /00 Patrol Y6 (GU) Wagon & SWB 600 / 60 600 / 60 OMESD 997 on Patrol Y6 (GU) CC (Coil Front/Leaf Spring Rear) 600 600 OMESD Patrol Y6 (GU) Cab Chassis (All Coil Springs) 600 / 60 600 / 60 OMESD 9/989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis 600 / 60 600 / 60 OMESD6 To 8/989 Patrol Y60 (GQ) Wagon & SWB 600 / 60 600 / 60 OMESD Page 0 Cont. OME INT CAT. NO.8 SEPTEMBER 08 600 600 60

Contents!A YEAR VEHICLE DESCRIPTION STEERING STABILISERS NISSAN (continued) 9/989 on Patrol Y60 (GQ) LWB, SWB & CC Suits LPG Conversion 600 / 60 60 OMESD6 To 8/989 Patrol Y60 (GQ) Wagon & SWB Suits LPG Conversion 600 / 60 60 OMESD From 988, Patrol Y60 (GQ) LWB Off Road Use ONLY 600L 600L 8/89 on OMESD6 Pre 8/89 OMESD 988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) 60068 600 OMESD 00 to 0 Pathfinder R (not USA manufactured model) 9000 6006 986 to 8/9 Pathfinder/Terrano WD 600 *6006 / 600 OMESD 00 on Navara D0 / Frontier (USA) 9000 *600 / 6007 0 on Navara D NP00 (Leaf Spring Rear) 900 *60 / 60 Navara D NP00 (Coil Spring Rear) 900 *607 / 606 008 to 0 NP00 All Models 600 600 0/00 on Navara D All Models 600 600 /86 to 8/0 Navara D & D Pick Up 600 600 OMESD 6 /986 on Navara D & D Pick Up x 6000 N/A 980 to 98 70 Ute & Cab Chassis 6000 *6006 / 600 996 to 00 Terrano II R0 600 6008 996 to 999 Terrano II x (European Models) 600 6008 00 on Xterra 9000 6007 SSANGYONG 99 to 00 Musso, Sport Utility & Korando Models 600 SUZUKI SELECTION 009 on Equator (US Market Only) 9000 TOYOTA 007 on LandCruiser 00 Series V8 Not AHC Models 900 / 9007 600 / 609 /998 on LandCruiser 00 Series (IFS) Not AHC Models *6000 / 60000 *6000 / 6000 LandCruiser 0 & 80 Series (Front Live Axle) *60070 / 6008 6007 / 6000 OMESD From 0/90 LC 0 & 80 Series (Front Live Axle) LPG conversion *60070 / 6008 6000 OMESD LandCruiser 80 & 0 Series Off Road Use ONLY, 6008L / 60070L 6000L / 6007L OMESD /90 to 998 LandCruiser 80 Series *60070 / 6008 6007 / 6000 OMESD 009 on Prado 0 Series LWB (Coil Spring Models Only) 9000 *6008 / 60080 Prado 0 Series SWB (Coil Spring Models Only) *9000 / 9006 *60080 / 60086 /00 to 09 Prado 0 Series LWB & SWB (Not TEMS/Grande Models) 7/96 to 0/0 Prado 9 & KZJ90 Series 9000 LandCruiser 78 & 79 Series SC 6 Cyl. Petrol, Diesel & V8 007 on 60008 Diesel Models Not GR-FE Models 999 to 006 LandCruiser 78 & 79 Series SC - 6 Cylinder Petrol & Diesel Models Not GR-FE Models OME SHOCKS & STRUTS *90000 / 900 OMESD 007 on LandCruiser 76 Series Wagon - V8 60008 *60 / 600 / 6000 OMESD7 98 to 999 LandCruiser 7 Series Not GR-FE Models 6006 / 60009 600 / 6000 OMESD All LandCruiser 70 Series Dual Cab Not GR-FE Models 60008 6009 / 6000 / OMESD 6 Cyl. 600 OMESD7 V8 Dsl. 98 on LandCruiser 70, 7 & 7 Series SWB & MWB 60009 6006 OMESD To 007 LandCruiser HZJ7 & HJZ7 Series SWB & MWB 60008 600 OMESD All LandCruiser II Wagon LWB 60089 60090 98 to 990 Bundera RJ70 6009 60096 6009 RHS LHS 986 to /90 LandCruiser 60,6 & 6 Series (Rear Lower Pin 9mm) 6006 / 60009 *6006 / 6006 OMESD 980 to 986 LandCruiser 60 Series (Rear Lower Pin 6mm) 6006 / 60009 *6006 / 600 OMESD All LandCruiser - 7 Series All LWB Models 60097 6006 / 600 OMESD LandCruiser 0 - Series SWB 60097 *6006 / 600 OMESD 00 on FJ Cruiser *9000 / 9006 *6008 / 60080 *60080 / 60086 006 to 00 FJ Cruiser *90000 / 900 *6000 / 60 6008 0 on Fortuner 9008 / 9009 60 / 60 00 to 0 Fortuner *9000 / 900 60078 / 60077 0 on HiLux All Models 9008 /9009 *60 / 60 00 to 0 HiLux Vigo KUN6R, GGNR *9000 /900 60007 / 60006 Cont. 60008 N/A 6007 *6000 / 6000 *6000 / 60 *6007 / 6008 600 / 6000 / OMESD7 6009 600 / 6000 / 6009 Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A YEAR STEERING STABILISERS TOYOTA (continued) 9/97 to 00 HiLux Tiger LN7, LN67, KZN6, RZN7 & 600 600 7 600 RZN69 (IFS) LHS RHS OMESD 9/8 to 8/97 HiLux LN6, YN6, LN06 & RN0 (All Leaf Suspension) 6006 *6006 / 6006 OMESD To 8/98 HiLux LN6 & RN6 (All Leaf) (Rear Lower Pin 6mm) 6006 *6006 / 600 OMESD 988 to 8/97 HiLux/ Runner LN07, RN0, RN0 & LN (IFS) 6007 6006 OMESD 06 on Tacoma *90000 / 900 6009 00 to 0 Tacoma V6 *90000 / 900 6009 998 to 00 Tacoma V6 & Cylinder Models 9000 *6006 / 6006 007 on Tundra 9008 6000 00 on Runner (USA) 9000 *6008 / 60080 00 to 00 Runner (USA) 90000 *6000 / 6000 996 to 00 Runner/Surf Front & Rear Coil Springs (USA) 9000 *6007 / 6008 990 to 996 Runner (IFS) Front Torsion Bar/Rear Coil Springs 6007 6007 OMESD 9/8 to 8/97 Runner (All Leaf Suspension) 6006 *6006 / 6006 OMESD To 8/98 Runner (All Leaf Suspension) (Rear Lower Pin 6mm) 6006 *6006 / 600 OMESD 986 to 990 Runner (IFS) Rear Leaf Springs 6007 6006 OMESD 900,,0 / Amarok Cylinder Diesel 00 on 900,,0 6008 / 6008 Amarok V6 Diesel 900,,0 6008 / 6008 Conten NOTES: *first part number has firmer valving.. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME66 (suits Sorento BL To 09, FJ Criser 06 On, Runner 0 On & 0 to 0 USA models, LandCruiser 76 LWB, 80, 00, 0, 00 Series, Prado 0 09 on coil sprung not Kakadu, 0 Series 0/0 to 09 not TEMS & Prado 90 Series to 0/00 LWB). OME66 (suits LandCruiser 0 & 80 Series with mm diameter Control Arm, 00 Series IFS AHC with 0mm diameter Control Arm). OME660 (suits all other models).. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.. FK8 rear sway bar extension bracket for LWB Models and FK for SWB Models are mandatory fitments with Nitrochargers to prevent damage to sway bar due to increased wheel droop.. FK support brackets must be installed to upper shock mounting brackets on late 996 on models manufactured in Thailand.. Original struts and OME coils cannot be used together. No top mounting bushes and dirt shield supplied, re-use OE bushes and dirt shield. 6. OMESD will suit D models only. 7. 600 is 0mm longer and must only be installed to right hand side. 8. OMEB bush kit is required to convert lower 9mm bush to 6mm ID. 9. OMESD0 will only fit left hand drive models. 0. FK6 0mm bump stop spacer kit is a mandatory fitment.. No top mounting bushes supplied, re-use OE bushes.. When remaining stock is exhausted no further product will be available.. No top mounting bushes supplied, refer to vehicle specific application to select relevant upper strut bushes. OE bushes may be re-used if in good condition.. FK is a mandatory fitment to space sway bar link away from shock absorber.. VOLKSWAGEN SELECTION VEHICLE DESCRIPTION OME front shock 60 is not suitable as an OE replacement. When fitting our longer OME shock 60 you must fit: FK7 brakeline kit to extend/drop the brakelines, FK7 sway bar kit to lower the front swaybar, FK70 radius arm drop bracket kit to 0 on models, FK80 to 08-0 models as if not fitted you may over stretch the front brakelines. 6. Re-use rear OE top damper forged bracket, bushes, dirt shield, bumpstops and fasteners for the assembly of the rear shock. 7. No top mounting bushes supplied use OME / OME / OME, vehicle specific refer to vehicle selection page. OE bushes may be re-used if in good condition. OME struts can only be installed with OME coils. 8. 600 and 60 cannot be used as a shock only OE replacement on Colorado 7/Trailblazer Models. Can be used as an OE replacement for Isuzu MU-X. 9. No top mounting bushes supplied use OME. OE bushes may be re-used if in good condition. No dirt shield supplied, please re-use OE. 0. Shock absorber 600 is suited for constant rear loading in excess of 800kgs.. 97 and newer FJ0's may need to use N76 shocks in rear: Pre 97 shock eye in the top of the axle housing use N89/N9 /600/6006. Post 97 lower shock eye is below leaf spring use N76 with OMEB Bush Kit.. FK9 Rear Driveshaft Spacer is a mandatory fitment.. Top mount bump stop and bushes not supplied, re-use OE items.. For trimming purposes only, maximum packer per strut.. OME66 Lower Shock Mount Stone Guard is mandatory fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 6. FK Front Shock Absorber Upper Mount Support Bracket Kit is a mandatory fitment. OME SHOCKS & STRUTS 7. When fitting 6008 / 60070 it is mandatory to fit longer coils 06-066 for springs to remain trapped with shocks fully extended, fit FK6 to prevent shock damage, fit FK6 for front driveshaft clearance and rear extended travel, fit FK6 which replaces OE upper shock mount when fitting rear shocks and remove any inner helper coils already fitted. Caution: Front driveshaft MUST be replaced / modified with Double Cardan Joints and checked for Uni bind with OME shocks installed at droop. Cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Conten NOTES: - (cont.) - *first part number has firmer valving. 8. Caution: Due to altered gearbox mounts on models after 998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front Double Cardan Joints. 9. Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if Caster Kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. 0. Volkswagen Service Manual quotes that driveshaft bolts are a one use only. It is recommended to replace bolts. Replacement bolts Volkswagen Part Number N90990 are to be sourced separately.. Suits 7mm and 00mm coils. Vehicle specific, refer to vehicle selection page for full details and to review important notification regarding modifications for off road use only along with warranty implications. JK Wrangler: refer page Patrol GU Y6 & GQ Y60: refer page 66 LandCruiser 80 & 0 Series: refer page 89 REPLACEMENT DIRT SHIELDS Nitrocharger Dust Boot - Black OME Nitrocharger Dust Boot - Yellow OME Sports Dirt Shield - Strut -0-07 Sports Dust Boot - Black -0-08 Hard Sport Dirt Shield Hard Sport Dirt Shield Hard Sport Dirt Shield Hard Sport Dirt Shield 70mm long 0mm long 0mm long 90mm long 800670 80060 80060 800690 Note: The last numbers of the part number indicates the length of the dirt shield. Vehicle SELECTION Front L SERIES Open (mm) Closed (mm) Rear Open (mm) Closed (mm) Jeep JK 60066L 69 0 60067L 706 (Middle Front) 60066M 66 8 n/a n/a n/a Jeep XJ 600L 678 9 600L 6 66 Jeep TJ 6007L 678 9 6009L 6 66 Patrol Y60, Y6 600L 600L 76 6 LandCruiser 80, 00 60070L 667 8 6007L 67 87 6008L 667 8 6000L 67 87 Discovery I to 99 6007L 9 9 6009L 600 66 Discovery II to 0 600L 67 88 600L 67 88 Defender 90, 0, 0 6007L 9 9 6009L 600 66 Range Rover to /9 Non Airbag Models 6007L 9 9 6009L 600 66 Remarks: Refer to page 7 to 60 of the OME International Application Catalogue for open and closed lengths of equivalent standard Nitrocharger Sport models. Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SHOCK ABSORBER SELECTION ADVICE Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications. YEAR S & STEERING STABILISERS Firm Valving The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developed to control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axle bounce over rough roads. If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads. Soft Valving Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring can occur. A CAUTION FOR CUSTOMERS BUYING REPLACEMENT SHOCK ABSORBERS By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that the original springs are also ready for replacement. It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers to work a lot harder. Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handling qualities will also be reduced. REMEMBER: A good set of shock absorbers will not overcome a bad set of springs. VEHICLE DESCRIPTION STEERING STABILISERS CHRYSLER JEEP 006 to 00 Comander XK *N9S/N88S *N0/N90 008 to 0 Cherokee/Liberty KK ALL Models 6, 8 NS N 8 00 to 007 Cherokee/Liberty KJ ALL Models (OME Springs) *NS 6,8 /NS0 6,8 N 8 006 to 00 Grand Cherokee WH & WK *N9S/N88S 6 *N0/N90 998 to 00 Grand Cherokee WJ & WG N N7 99 to 998 Grand Cherokee ZJ - 6 cylinder & V8 engines *N9 8 See Sport Selection OMESD0 0 98 on Cherokee XJ - Petrol & Diesel See Sport Selection See Sport Selection OMESD0 0 To 986 Cherokee Wagon & J0 Ute (Full Size) N See Sport Selection 97 to 986 Cherokee W0 & J0 Utes and Cab Chassis N N To 986 CJ, 6, 7, & 8 *N/N8-006 on Wrangler JK - All Models See Sport Selection N98 8 OMESD8 997 to 006 Wrangler TJ *N66 8 /N66C 8 N67,8 OMESD0 0 986 to 996 Wrangler YJ N See Sport Selection OMESD0 0 DAIHATSU 99 to 997 Feroza II F0 N8 8 *N9/N96 988 to 99 Feroza I F00 N8 8 N 99 on Rocky F78 Wide Track - N OMESD 8 '86 on 98 to 8/9 Rocky F70, F7, F80 & F8 Hard Top with Leaf Springs OME07 N OMESD 8 '86 on 98 to 99 Rocky F77 & 78 Tray Top with Leaf Springs OME07 *N8/N97 All Scat Hard Top N/N8 *N8/N97 FORD 006 to 0 Ranger PJ All Models N9 8 8, 8 /N87 See Sport Selection 98 to 00 Courier/Ranger Tonne not USA manufactured model N 8,8 See Sport Selection To 00 Explorer x Only N6 N7 00 to 008 Ford F0 & F0 N9 N79 999 to 00 Ford F0 & F0 N78 N79+N80 9 987 to 99 Raider Wagon N 8 - To 8/89 OMESD Maverick Wagon & Hard Top *N 8 /NF 8 N9 All 9/89 on OMESD6 Maverick Ute & Cab Chassis See Sport Selection N OMESD 98 to 989 Bronco (Single I Beam Front End) - N 98 to 989 Bronco (Dual I Beam Front End) - N 98 to 989 F00 x & x (Single I Beam) - N HOLDEN/ISUZU/CHEVY GM/Isuzu Pick up - Colorado RC/DMAX Diesel Models 008 to 0 GM/Isuzu Pick up - Colorado V6/DMAX Petrol OME S, STRUTS & CARTRIDGES See Sport Selection See Sport Selection *N/N89 *N/N89 Cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A YEAR S & STEERING STABILISERS VEHICLE DESCRIPTION STEERING STABILISERS HOLDEN/ISUZU/CHEVY (continued) 00 to 0 Rodeo Pick Up - RA Models See Sport Selection *N/N89 00 to 008 Rodeo Pick Up - RA & RA7 Models See Sport Selection *N/N89 7/8 to 00 Rodeo/Isuzu Pick Up KB, KBD & TFS See Sport Selection *N/N89 99 to 00 Jackaroo/Trooper & Monterey (Isuzu Wagon) See Sport Selection See Sport Selection /86 to /9 Jackaroo/Trooper See Sport Selection *N/N89 98 to 0/86 Jackaroo/Trooper See Sport Selection *N/N89 99 to 6/00 Frontera Wagon See Sport Selection N0 99 to 998 Frontera & Door UT See Sport Selection See Sport Selection 98 to 987 Drover QB (OE Springs) OME0 - OMESD0 98 to 987 Drover QB (OME Springs Fitted) OME0 OME0 OMESD0 KIA 006 to 009 Sorento All BL Models N7S + N8S 6 0 to Late 06 Sorento All Models N7S + N8S 6 LAND ROVER 999 to 00 Discovery Series II (Not Suitable for Air Bag Models) *N07 8 N08 8 OMESD0 99 to 999 Discovery Series I NF 8 See Sport Selection OMESD 99 to 00 Range Rover MK II P8A Models N76 N77 To /99 Range Rover (Not Suitable for Air Bag Models) NF 8 See Sport Selection OMESD 98 on To 98 Defender / County 0 & 0 Land Rover Series I, II & III (80" & 09") NF 8 N78 See Sport Selection N69 OMESD OMESD Defender / County 90 Land Rover Series II & III (88" SWB) NF 8 N78 See Sport Selection N90 8 OMESD OMESD MAHINDRA 990 to 99 Bushranger & Stockman CJ0 *N/N8 MAZDA 06 to 0 Mazda BT0 All Models *N9 8 /N87 8,8 987 to 006 B600 Pick Up All Models N 8,8 OME S, STRUTS & CARTRIDGES *N/N8 See Sport Selection See Sport Selection MITSUBISHI 0 on Pajero Sport All Diesel Models N86S 9 N6 Pajero/Montero SWB NS, NM, NP & NT (. Diesel) See Sport Selection N0 8 /000 on Pajero/Montero SWB NS, NM, NP & NT Wagon & Hard Top (V6) See Sport Selection N0 8 99 to /00 Pajero/Montero (Rear Coil Springs) NH, NJ, NK & NL N8 8 N6 8 Pajero/Montero (Rear Leaf Springs) NH, NJ, NK & NL N8 8 See Sport Selection 989 to /9 Pajero/Montero (Rear Coil Springs) NF & NG See Sport Selection See Sport Selection To /99 Pajero/Montero (Rear Leaf Springs) NA, NB, NC, ND, NE, NF & NG See Sport Selection See Sport Selection 009 on Challenger/Montero Sport KH N86S 9 N6 000 to 008 Challenger/Montero Sport (Rear Coil Springs) See Sport Selection N6 998 to 000 Challenger/Montero Sport (Rear Leaf Springs) See Sport Selection See Sport Selection 7/06 to 0 Triton/L00 ML & MN All Models N86S 9 N9 0/96 to 6/06 Triton/L00 MK All Models N8 8 N0E 99 to 8/96 Triton/L00 V6 (OE Springs) See Sport Selection N0E 99 to 8/96 Triton/L00 (V6) MH & MJ See Sport Selection See Sport Selection 986 to 8/96 Triton/L00 ( Cylinder) ME, MF, MG, MH & MJ See Sport Selection See Sport Selection To 986 L00 MA, MB, MC & MD See Sport Selection See Sport Selection To 9/986 L00 Vans SA, SB, SC & SD See Sport Selection N89 NISSAN /000 on Patrol Y6 (GU) SWB & Wagon *N9/N9C 8 N9 OMESD0 997 on Patrol Y6 (GU) Cab Chassis (Coil Front/Leaf Spring Rear) *N9/N9C 8 N OMESD Patrol Y6 (GU) Cab Chassis (All Coil Springs) *N9/N9C 8 N9 OMESD 997 to /00 Patrol Y6 (GU) Wagon & SWB *N9/N9C 8 N9 OMESD 9/989 on Patrol Y60 (GQ) Wagon & SWB *N 8 /NF 8 *N9/NF 8 OMESD6 Patrol Y60 (GQ) Cab Chassis (Coil Springs) N 8 /NF 8 *N9/NF 8 OMESD6 To 8/989 Patrol Y60 (GQ) Wagon & SWB *N 8 /NF 8 *N9/NF 8 OMESD 988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) See Sport Selection N OMESD All Patrol MQ 60 LWB Spanish Built.8td Models N9 *N/N89 8/8 to 988 Patrol MQ Wagon, SWB, Ute & Cab Chassis N9 N8/N97 OMESD 980 to 7/8 Patrol MQ Wagon, SWB, Ute & Cab Chassis *N7/N96 N8/N97 OMESD 967 to 979 Patrol 60 & G60 Series N9 N9 OMESD 00 to 0 Pathfinder R See Sport Selection See Sport Selection Cont. Page OME INT CAT. NO.8 SEPTEMBER 08 N0 N9

Contents!A S & STEERING STABILISERS YEAR VEHICLE DESCRIPTION STEERING STABILISERS NISSAN (continued) /99 to 00 Pathfinder R0 V6 Model NS+N6S 6, N0 996 to /99 Pathfinder R0 V6 Model NS+N6S 6, N6 986 to 8/9 Pathfinder/Terrano WD See Sport Selection *N/N89 OMESD 00 on Navara D0 See Sport Selection N8 0/00 on Navara D See Sport Selection N9 008 to 0 NP00 All Models See Sport Selection N9 /86 to 8/0 Navara D & D Pick Up N8,8 N9 OMESD /986 on Navara D & D Pick Up x N8 8 *N/N8 996 to 00 Terrano II x (European Models) (OE Springs) See Sport Selection See Sport Selection 00 on Xterra See Sport Selection N8 0 980 to 98 70 Ute & Cab Chassis N8 8 *N/N89 SSANGYONG To 00 Musso, Sport Utility & Korando Models See Sport Selection OME S, STRUTS & CARTRIDGES SUZUKI 009 on Equator (US Market Only) See Sport Selection N8 00 to 00 XL7 Wagon V6 N0S 7 N0 8/0 to 0 Grand Vitara Wagon Models N7S + N8S OME06 99 to 00 Grand Vitara petrol & 6 Cylinder & diesel engines N0S N0 7/88 to 00 Vitara TA0, TD0 & Wagon N0S N0 Vitara TA0 TD0 SWB N0S N All Jimny SN (OE Springs) OME08 7, 8 OME00 All Jimny SN (OME Springs) OME08 OME09 To 00 Santana Samurai All Models OME0 OME0 OMESD0 98 to 99 Sierra SJ0 & SJ Ute MG0 / WT000cc (OME Springs) OME0 OME0 OMESD0 988 to 996 Sierra SJ70, SJ7, SJ, MG0 / WT00cc (OME Springs) OME0 OME0 OMESD0 978 to /8 LJ80 & LJ80V SWB (OE Springs) OME0 - OMESD0, LJ80 & LJ80V SWB (OME Springs) OME0 N OMESD0 978 to /8 LJ80 Ute (OME Springs) OME0 OME0 OMESD0 97 to /8 0, LJ0, LJ0 & LJ0 (OME Springs) OME0 OME0 OMESD0 TOYOTA 007 on LandCruiser 00 Series V8 Not AHC N08S 8 *N0 8 /N09 /998 on LandCruiser 00 Series (IFS) Not AHC *N99 8 /N/N00 8 *N00 8 /N0 LandCruiser 00 & 0 Series (Front Live Axle) N7 N7E OMESD /90 to 998 LandCruiser 80 Series N7 N7E OMESD /00 to 09 Prado 0 Series (Except TEMS/Grande Models) *N0S 7,9 / N0S 9 /, 7 N9S N0,8 /N 7/96 to 0/0 Prado 9 & KZJ90 Series N9SC 8 N86 007 on LandCruiser 78 & 79 Series V8 Diesel Model *N8 8 /N06 8 See Sport Selection OMESD7 LandCruiser 78 & 79 Series 6 Cyl. Petrol & Diesel Models N8 8 See Sport Selection OMESD7 999 to 006 LandCruiser 78 & 79 Series - 6 Cylinder Models N06 8 N7F 8 OMESD 007 on LandCruiser 76 Series Wagon - V8 *N8 8 /N06 8 See Sport Selection OMESD7 98 to 999 LandCruiser 7 Series *N0/N9 8 N7F 8 OMESD All LandCruiser II LJ/RJ70, LJ/KZJ7 & LJ/KZJ78 Models N77 8 N79 8 OMESD 98 to 990 LandCruiser Bundera, SWB, LJ70 & RJ70 Series N 8 N 8 RHS All LandCruiser 70 Series Dual Cab N8 8 See Sport Selection OMESD 98 on LandCruiser 70,7 & 7 Series SWB & MWB *N0/N9 8 *N8 8 /N9 8 OMESD To 007 LandCruiser HZJ7 & HJZ7 Series N06 8 See Sport Selection OMESD 986 to /90 LandCruiser 60,6 & 6 Series (Rear Lower Pin 9mm) *N0/N9 8 *N90 8 /N8 8 /N9 8 OMESD 980 to 986 LandCruiser 60 Series (Rear Lower Pin 6mm) *N0/N9 8 *N/N89/N9 8 OMESD 980 to 986 LandCruiser 60 Series (OE Springs) N0 N OMESD 986 to /90 LandCruiser 60 Series (OE Springs) N0 N90 8 /N8 8 OMESD To /980 LandCruiser FJ N N To /98 LandCruiser & 7 Series All LWB Models *N/N8 *N/N89 OMESD LandCruiser BJ, FJ & HJ 0 & Series SWB *N/N8 *N89/N9 8, OMESD To /98 LandCruiser BJ, FJ & HJ 0 & Series All Models (OE Springs) N N OMESD 00 To 0 Fortuner *N67S 9 /N66S 9 N9 006 to 00 FJ Cruiser N0S 9 N 00 To 0 HiLux Vigo KUN6R, GGNR *N67S 9 /N66S 9 *N69 8 /N68 9/97 to 00 HiLux Tiger LN7, LN67, KZN 6, RZN7 & RZN69 (IFS) See Sport Selection N7 8 OMESD 9/8 to 8/97 HiLux LN6, YN6, LN06 & RN0 (All Leaf Suspension) See Sport Selection *N8 8 /N9 8 OMESD To 8/98 HiLux LN6 & RN6 (All Leaf) (Rear Lower Pin 6mm) See Sport Selection *N89/N9 8 OMESD Cont. Page 6 OME INT CAT. NO.8 SEPTEMBER 08 N8

Contents!A S & STEERING STABILISERS YEAR VEHICLE DESCRIPTION STEERING STABILISERS TOYOTA (continued) To 8/98 HiLux LN6 & RN6 (All Leaf) (Rear Lower Pin 6mm) (OE Springs) See Sport Selection *N/N89 OMESD 9/8 to 8/97 HiLux LN6, YN6, LN06 & RN0 (OE Springs) See Sport Selection *N90 8 /N8 8 OMESD 988 to 8/97 HiLux/ Runner LN07, RN0, RN0 & LN (IFS) See Sport Selection *N8 8 /N9 8 OMESD 988 to 8/97 HiLux/ Runner LN07, RN0, RN0 & LN(IFS)(OE Springs) See Sport Selection *N90 8 /N8 8 OMESD 00 to 0 Runner (USA) N0S 9 N 996 to 00 Runner/Surf Front & Rear Coil Springs (USA) N9SC 8 N86 990 to 996 Runner (IFS) Front Torsion Bar/Rear Coil Springs See Sport Selection N7F 8 OMESD 986 to 990 Runner (IFS) Rear Leaf Springs (OE Springs) See Sport Selection N8 8 /N9 8 OMESD 986 to 990 Runner (IFS) Rear Leaf Springs See Sport Selection *N8 8 /N9 8 OMESD 98 to 986 Runner (Front Live Axle) (OE Springs) See Sport Selection N90 8 /N8 8 OMESD 98 to 986 Runner (Front Live Axle) See Sport Selection N8 8 /N9 8 OMESD 98 to 98 Blizzard *N/N8 N8 997 to 00 Kijang (th Gen.) N8 8-00 to 0 Tacoma V6 N0S 9 N8 8 To 00 Tacoma V6 & Cylinder Models N9SC 8 N8 8 007 on Tundra N9S 6 N9 VOLKSWAGEN 98 to 990 Syncro x N8S N7 Remarks:. 98 and on wide track CJ Jeeps require bush kit OMEB7 for the front lower mount and all Cherokee wagons and Mahindra lower front and rear mounts.. Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. OME66 (suits Sorento BL To 09, FJ Criser 06 On, Runner 0 On, LandCruiser 76 LWB, 00 Series, Prado 0 09 on coil sprung not Kakadu, 0 Series 0/0 to 09 not TEMS & Prado 90 Series to 0/00 LWB). OME66 (suits LandCruiser 0 & 80 Series with mm diameter Control Arm, 00 Series IFS not AHC with 0mm diameter Control Arm). OME660 (all other models).. 98 on F00 and Bronco require bush kit OMEB7 on bottom rear mount.. It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.. FK6 0mm bump stop spacer kit mandatory fitment. 6. FK8 rear sway bar extension bracket for LWB models and FK for SWB models are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop. 7. FK support brackets must be installed to upper shock mounting brackets on late 996 on models manufactured in Thailand. 8. N08S can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes. 9. N79 suits models with single rear shock set up. Models with twin rear shocks require N79 fitment rear of axle, N80 front of axle, also fitment of OME660 stone shields are recommended on the N80. 0. OMESD0 will only fit left hand drive models.. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB) be fitted.. OMESD will suit D models only.. Only suitable for models equipped with original steering damper.. Shocks are the same length as OE.. OME00 8 is shorter than OME09 and must be used with OE coils to ensure coils remain entrapped. 6. No top mounting bushes supplied, re-use OE bushes. 7. FK8 Bump Stop Spacer Kit is a mandatory fitment with N0S Struts. 8. When remaining stock is exhausted no further product will be available. 9. No top mounting bushes supplied, refer to vehicle specific application to select relevant upper strut bushes. OE bushes may be re-used if in good condition. 0. FK is a mandatory fitment to space sway bar link away from shock absorber.. Vehicles with ABS will require ABS Bracket Kit SMP68.. Front strut has 0mm longer travel than original equipment.. Rear shock has 0mm longer travel than original equipment. OME S, STRUTS & CARTRIDGES. 97 and newer FJ0's may need to use N76 shocks in rear: Pre 97 shock eye in the top of the axle housing use N89/N9 /600/6006. Post 97 lower shock eye is below leaf spring use N76 with OMEB Bush Kit. Note: Replacement dust boot part numbers Nitrocharger: OME - Small Replacement dust boot part numbers Nitrocharger: OME - Large Refer to page 6 to 6 of the OME International Application Catalogue for open and closed lengths of equivalent standard Nitrocharger models. NOTES: *first part number has firmer valving. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

COMPACT AWD - OME SPRING & SHOCK ABSORBER Contents!A LIFT F/R YEAR VEHICLE DESCRIPTION (mm) PRICE PRICE DAIHATSU No Longer 97 to 006 Terios J00 J0 0/0 Available FORD No Longer To 06/006 Escape BA ZA AB 0/0 90 Available 0 to 0/007 Territory SX SY AWD (WD) 0/0 GM / OPEL 006 on Captiva, Antara - V6 (.) & Diesel 0/0 9 0 HONDA 0/007 on CRV 0/0 6 /0 to 0/07 CRV MY 00 MY 00 -/0 CANNOT LIFT 8 0/97 to /0 CRV RD 0/0 797 798 HYUNDAI 0/06 to 8/08 Santa Fe CM V6 (.7) & Diesel 0/0 7 8 000 to 00 Santa Fe 0/0 907 908 KIA 00 to 009 Sportage V6 & Diesel KM Models 0/0 No Longer Available 6 997 to 00 Sportage JA MY0 MY0 - V6 0/0 No Longer Available LAND ROVER No Longer /00 to /0 Freelander V6 & Ltr Diesel DOHC - Wagon 0/0 0 Available Freelander Cylinder Petrol Wagon 0/0 0 0 To 0/000 OME Cartridge to Suit OME Springs No Longer Available No Longer Available Freelander V6 & Ltr Diesel DOHC 0/0 00 0 OME Cartridge to Suit OME Springs No Longer Available No Longer Available LEXUS 00 on RX-0 WD MCU8R MY0 - V6 0/0 09 0 MAZDA To 06/006 Tribute YU MY0 MY0 0/0 90 90 NISSAN 007 to 0 X-Trail Petrol / X-Trail Diesel / No Longer Available X-Trail Petrol 0/0 06 No Longer 0 to 0/006 X-Trail Diesel 0/0 07 Available OME Strut to Suit OME Springs NS+NS NS+N6S SUBARU 7/0 to 00 Forester MY0 MY0 MY0 0/0 No Longer Available 0 9/0 to 006 Outback th Gen MY0 MY0 MY06 Cyl 0/0 6 8 Outback th Gen MY0 MY0 MY06 6Cyl 0/0 7 8 TOYOTA 0 to 0/007 Kluger / Highlander MCU0R - V6 0/0 09 0 0/006 on Rav LWB ACAR - Cylinder 0/0 No Longer Available 0 Rav SWB & LWB ACA0R ACAR - Diesel 0/0 No Longer Available 79 07/00 to 08/0 Rav SWB & LWB ACA0R ACAR - Petrol 0/0 79 79 OME Struts / Gas Shocks to Suit OME Springs Rav LWB SXAR MY98 MY99 - Petrol / No Longer Available 79 OME0 79 OME Struts / Gas Shocks to Suit OME Springs No Longer Available OME0 To 000 No Longer Rav SWB SXAR MY98 MY99 - Petrol / 79 Available OME Struts / Gas Shocks to Suit OME Springs No Longer Available OME0 NOTES:. When remaining stock is exhausted no further product will be available. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Note: LTR REMOTE CANISTERS Replacement dust boot part numbers LTR: OME - Large Black Replacement dust boot part numbers LTR: OME - Small Yellow GASSING REMOTE CANISTER SHOCK ABSORBERS The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve, part number 7, from Schrader Automotive Inc is required to guarantee correct pressure is reached. When using a Schrader valve to gas your LTR Shock absorber first set the pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end of the remote canister. Gas the canister until the shock absorber shaft is fully extended, hold gas pressure for 0 seconds, release Schrader valve and remove. Note: This can be done for you by your Old Man Emu Stockist. Important: Gassing of your LTR shock absorber should be carried out before fitment to the vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension before gassing. MINIMUM/MAXIMUM GAS PRESSURE On Road/Off Road 0-80psi (.8 -. BAR) Competition 80-00psi (. - 6.9 BAR) An increase in gas pressure firms up ride quality but will not alter ride height. MAINTENANCE The following checks need to be carried out as part of regular vehicle maintenance. To ensure maximum cooling of your LTR shock absorber inspect the shock absorber body and canister for any mud and debris build up and clean if necessary. Check that the polyurethane boot is securely fastened in place and that it is not damaged. If the boot is found to be detached thoroughly clean the shock absorber shaft and inside the boot before reattaching it. Ensure all polyurethane bushes, locating washers and nuts are in good condition and securely fastened. To ensure maximum shock absorber performance check gas pressure every 0,000km. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Conte ARMOURED APPLICATIONS -.T GVM TOYOTA LANDCRUISER 00 SERIES -.T GVM COILS COILS SHOCKS 70 900 COMPONENTS SWAY BAR OMESTAB STRUT TOP HAT KIT OMETH00 COIL SPRING TRIM PACKER OME9PF COILS COILS 067 SHOCKS 609 COMPONENTS SWAY BAR OMESTAB6 SWAY BAR FITTING KIT FK7 STONE GUARD KIT OME66 COIL SPRING TRIM PACKER OME80PR0 Replaces OE top hat if worn COMMENTS COMMENTS Recommended fitment Conte NISSAN PATROL Y6 -.T GVM COILS COILS 978 SHOCKS 900 COMPONENTS SWAY BAR OMESTAB7 SHOCKS 600 COMPONENTS SWAY BAR OMESTAB8 COILS COILS 069 NOTES ON ARMOURED SUSPENSION SELECTION & FITMENT: COMMENTS COMMENTS The above suspension systems have been designed and tested to suit a vehicle weight range of.9 -.T, for vehicle weights outside this range please contact ARB. Components have been designed to operate as a complete replacement system, it is not recommended to fit these products individually. LC00 Armoured Suspension System was designed for and tested on non-kdss equipped vehicles. Y6 Armoured Suspension System was designed for and tested on non-hbmc equipped vehicles. OME66 Lower Shock Stone Guards are recommended fitment for protection against stone damage on LC00. All fitting kits, components and replacement bushes are included with the above products where required. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

tents!a Estimated Lift: 0mm SPRING: No Bar 8 9 STRUT - SPORT LHS 900 900 RHS 9006 9006 SPRING: Bar 9 0 STRUT - SPORT LHS 900 900 RHS 9006 9006 SPRING: Bar / Winch 0 STRUT - SPORT LHS 900 900 RHS 9006 9006 TRIM PACKER FK79 FK79 (EXCLUDES TOW PACK OPTION) TOW PACK Estimated Lift: 0mm 07 07 60 606 SPRING: CONSTANT 00 KGS 060 060 60 607 Tow Pack option uses a Nivomat (self leveling) shock absorber and requires a specific design. Please note: when replacing Nivomat shocks, you must fit the appropriate OME spring. mm 6mm No top mounting bushes and dirt shield supplied, re-use OE bushes and dirt shield. Original struts and OME coils cannot be used together. To identify whether a vehicle has the standard fitment rear shock or Nivomat shock, the outer body diameter will need to be measured: Standard: Nivomat: CHRYSLER JEEP JEEP GRAND CHEROKEE WK 06 ON V6 PETROL ENGINE V8 &.L DIESEL ENGINE Fitting Time: Due to the complexity of installation allow hours for complete install. Page OME INT CAT. NO.8 SEPTEMBER 08

tents!a tents!a 9 9006 0 9006 9006 FK79 (EXCLUDES TOW PACK OPTION) TOW PACK Estimated Lift: 0mm 07 07 60 606 SPRING: CONSTANT 00 KGS 060 060 60 607 mm 6mm CHRYSLER JEEP JEEP GRAND CHEROKEE WK 0 TO 0 Estimated Lift: 0mm SPRING: No Bar 8 STRUT - SPORT 9006 SPRING: Bar 9 STRUT - SPORT 9006 SPRING: Bar / Winch 0 STRUT - SPORT 9006 TRIM PACKER FK79 No top mounting bushes and dirt shield supplied, re-use OE bushes and dirt shield. Original struts and OME coils cannot be used together. Tow Pack option uses a Nivomat (self leveling) shock absorber and requires a specific design. Please note: when replacing Nivomat shocks, you must fit the appropriate OME spring. To identify whether a vehicle has the standard fitment rear shock or Nivomat shock, the outer body diameter will need to be measured: Standard: Nivomat: V6 PETROL ENGINE Fitting Time: Due to the complexity of installation allow hours for complete install. V8 &.L DIESEL ENGINE Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A JEEP GRAND CHEROKEE WH & WK 00 TO 00 Estimated Lift: 0mm SPRING: TO 0 KGS STRUT SPRING: TO 00 KGS STRUT Estimated Lift: mm SPRING: HEAVY LOAD 990 *N9S / N88S 99 *N9S / N88S 99 *N0 / N90 99 *N0 / N90 No top mounting bushes supplied, re-use OE bushes. CHRYSLER JEEP V8 PETROL & DIESEL Conten JEEP GRAND CHEROKEE WJ & WG 999 TO 00 Estimated Lift: 0mm SPRING: TO 0 KGS 9 96 60087 60087 N N SPRING: TO 90 KGS 96 96 60087 60087 N N TRIM PACKER OMEWJPF0 OMEWJPF0 STABILISER BAR OMESTAB - - Estimated Lift: 0mm 9 60088 N7 SPRING: HEAVY LOAD 9 60088 N7 TRIM PACKER OMEWTJPR0 V6 & V8 PETROL ENGINES OMESTAB is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride quality improvement can be obtained. (OMESTAB does not suit.7 Diesel Models). Add only OMEWJPF0 Trim Packer to increase ride height for vehicles with bull bar and winch. DIESEL ENGINE Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A JEEP GRAND CHEROKEE ZJ 99 TO 998 Estimated Lift: 0 - mm SPRING: TO 0 KGS 9 9 6009 N9 SPRING: TO 90 KGS 90 9 6009 N9 STEERING DAMPER OMESD0 COIL PACKER OMEJGF0 Estimated Lift: 0 - mm 90 6009 SPRING: CONSTANT 00 KGS 9 6009 COIL PACKER OMEJGR0 CHRYSLER JEEP 6 CYLINDER & V8 ENGINES 9 and 90 suit 6 cylinder Models. 9 suits V8 Models. OMESD0 will only fit left hand drive Models. When existing stock of N9 is exhausted no further product will be available. Page OME INT CAT. NO.8 SEPTEMBER 08

tents!a SPRING: TO 0 KGS 990 STRUT *N9S / N88S SPRING: TO 00 KGS 99 STRUT *N9S / N88S Estimated Lift: mm CHRYSLER JEEP JEEP COMMANDER XK 006 TO 00 Estimated Lift: 0mm SPRING: LIGHT LOAD 99 *N0 / N90 99 *N0 / N90 No top mounting bushes supplied, re-use OE bushes. V8 PETROL & DIESEL Conten JEEP CHEROKEE XJ WAGON 98 TO 00 Estimated Lift: - mm SPRING: 90 600 TRIM PACKER OMEJGF0 STEERING DAMPER OMESD0 Estimated Lift: 0mm SPRING: LIGHT LOAD SPRING BUSH KIT U BOLTS GEARBOX PACKER KIT EXTRA LEAF CENTRE BOLT PETROL & DIESEL ENGINES CS0RA / B 600 CS0RA / B 600 OE OMEU60 OMEU7 XJGK0 DXL UCB8 + + Warning: XJ Models fitted with a bolt engine exhaust pipe flange, can experience a clearance problem with the tail shaft, when suspension is under full deflection. Fitment of an adjustable front panhard rod or a change to the smaller bolt flange will provide the required clearance. OMEU60 suits Dana type differential - Australian Models. OMEU7 suits AMC 8 / type differential. Trimming requirement greater than 0mm use A/A fitment. Where near level rake is desired B/B fitment should be used. DXL extra leaf can be fitted to CS0RA/B and CS0RA/B for heavier constant load carrying ability. NB: Models fitted with OE Up Country Suspension Pack will only be raised by 0mm. OMEJGF0 front coil packer can be used for trimming or extra lift purposes, using no more than packer. Fit XJGK0 Gearbox Packer Kit should a driveline vibration occur. OMESD0 will only fit left hand drive Models. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A V6.7L PETROL ENGINE.8 CRD DIESEL ENGINE Estimated Lift: 0-0mm SPRING: TO 0 KGS 96 STRUT - SPORT SPRING: TO 00 KGS 90009 97 STRUT - SPORT 90009 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS 70 60069 N 7 60069 N 97 90009 790 90009 Due to varying OE ride heights, some KK Models may only achieve a 0mm lift. No top mounting bushes supplied, re-use OE bushes. CHRYSLER JEEP JEEP CHEROKEE/LIBERTY KK 008 TO 0 When existing stock of NS and N is exhausted no further product will be available. Conten JEEP CHEROKEE/LIBERTY KJ 00 TO 007 Estimated Lift: 0-0mm SPRING: NO ACCESSORIES STRUT - SPORT STRUT SPRING: TO 0 KGS STRUT - SPORT SPRING: TO 00 KGS STRUT - SPORT Estimated Lift: 0mm SPRING: LIGHT LOAD 9 90009 NS0 96 90009 97 90009 97 60069 N 98 60069 N 96 90009 NS0 97 90009 790 90009 Due to varying OE ride heights, some KJ Models may only achieve a 0mm lift. No top mounting bushes supplied, re-use OE bushes. PETROL ENGINE When existing stock of NS0, NS and N is exhausted no further product will be available. DIESEL ENGINE Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 80 KGS TRIM PACKER STEERING DAMPER Estimated Lift: 0mm SPRING: SOFT TOP 9 99 6 6008 6009 N67 7 N67 7 SPRING: HARD TOP 9 99 6 6008 6009 N67 7 N67 7 SPRING: CONSTANT 00 KGS 9-6008 - N67 7 - SPRING: CONSTANT 00 KGS 99 6 996 6009 6009 N67 7 N67 7 FKWTJ0 FKWTJ0 PANHARD ROD BRACKET KIT FKWTJ0 FKWTJ0 TRIM PACKER OMEWTJPR0 OMEWTJPR0 JWGK0 JWGK0 GEARBOX PACKER KIT JWGK0 JWGK0 JWGK0 JWGK0 BUMPER STOP SPACER KIT FK6 FK6 CHRYSLER JEEP JEEP WRANGLER TJ & TJ UNLIMITED 997 TO 006 6 7 6 CYLINDER ENGINE 9 *6007 / 6006 N66 9 *6007 / 6006 N66 OMEJGF0 OMESD0 DOOR For ride height and trim adjustment use - Front: OMEJGF0 FKWTJ0 Panhard Rod Extension Bracket Kit fitment to right hand drive or FKWTJ0 to left hand drive Models is mandatory to ensure correct rear axle tracking. A Gear Box Packer Kit is mandatory fitment to prevent driveline vibration. JWGK0 suits all Models to 00. JWGK0 suits manual Models from 00. JWGK0 suits auto Models from 00. Rear: OMEWTJPR0 DOOR FK6: Mandatory fitment 0mm Bump Stop Spacer Kit to prevent coil springs becoming solid on full compression. OMESD0 only suitable for fitment to left hand drive Models. To achieve optimal vehicle balance front to rear when Rear Spring 99 is fitted, it is recommended that only 6007 is fitted to the front. When existing stock of N66, N66C and N67 is exhausted no further product will be available. 6 7 6 7 Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0-0mm SPRING: TO KGS: 0mm CS0F 60098 N SPRING: TO 9 KGS: 0mm CS0F 60098 N SPRING BUSH KIT OMESB7 OMESB87 GEAR BOX PACKER KIT JWGK0 GREASABLE SHACKLE KIT OMEGS STEERING DAMPER OMESD0 EXTRA LEAF DXL CENTRE BOLT UCB09 SPRING: HARD TOP MEDIUM LOAD TO 00 KGS SPRING: SOFT TOP LIGHT LOAD SPRING BUSH KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT JWGK0 fitment reduces driveline vibration. Please re-use original U-Bolts. CHRYSLER JEEP JEEP WRANGLER YJ 986 TO 996 Estimated Lift: 0mm 60099 CS07R 60099 OMESB7 OMESB87 OMEGS DXL UCB09 Use OMESB7 with original shackles. OMESB87 with OMEGS greasable shackles. OMESD0 will only fit left hand drive Models. PETROL ENGINE CS06R Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: NO BAR 66 67 SPRING: BAR 6 66 SPRING: BAR AND WINCH 67 68 60066 60066 STEERING DAMPER OMESD8 OMESD8 STEERING STABILISER MOUNT KIT - LHD FK0 FK0 TRIM PACKER OMEJKPF0 OMEJKPF0 CASTER CORRECTION KIT FK 6 FK 6 BP- SELECTION SHOCK WRANGLER JK " BP600 BP600 BP KIT WRANGLER JK +"/+ " VM80000 VM80000 Estimated Lift: 00mm OMEJK " COMPLETE LIFT KIT OMEJKRHDD OMEJKD CHRYSLER JEEP JEEP WRANGLER JK DOOR 006 ON Estimated Lift: 0mm Estimated Lift: 0mm 60 SPRING: CONSTANT 0 KGS 67 60067 N98 PANHARD ROD EXTENSION BKT KIT - LHD FK7 PANHARD ROD EXTENSION BKT KIT - RHD FK9 TRIM PACKER OMEJKPR0 BP- SELECTION SHOCK WRANGLER JK " BP600 BP KIT WRANGLER JK " VM80000 SUSPENSION KIT Estimated Lift: 00mm " COMPLETE LIFT KIT 6 7 V6 PETROL ENGINE OMEJKRHD PETROL ENGINE RHD MODELS DIESEL ENGINE RHD MODELS When existing stock of N98 is exhausted no further product will be available. PETROL ENGINE LHD MODELS DIESEL ENGINE LHD MODELS For trim adjustment use - Front: OMEJKPF0 Rear: OMEJKPR0. Do not fit more than packer per coil spring. FK0 is a mandatory fitment for 006 To 008 Models when fitting OMESD8. Left hand drive only. 0 Models with.6l engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms. FK Caster Kit will increase caster angle by o. Check manufacturer's specification if Caster Kit is required..8 DIESEL ENGINE Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating the panhard rod to its original position. Kit includes: x Front Shocks, x Rear Shocks, x (pair) Front Coils, x (pair) Rear Coils, x Steering Damper, x Front Forged Panhard, x Bump Stop Kit, x Brakeline Relocation Kit, x Rear Panhard Bracket Kit, x Sway Bar Link Dis-connect Kit, x Caster & Driveline Kit, x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models), x Front Trim Packer, x Rear Trim Packer, x Display Carton. See page for kit breakdown. 7 Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A JEEP WRANGLER JK DOOR 006 ON Estimated Lift: 0mm SPRING: NO BAR 67 68 SPRING: BAR 66 69 SPRING: BAR AND WINCH 68 69 60066 60066 STEERING DAMPER OMESD8 OMESD8 STEERING STABILIZER MOUNT KIT - LHD FK0 FK0 TRIM PACKER OMEJKPF0 OMEJKPF0 CASTER CORRECTION KIT FK 6 FK 6 BP- SELECTION SHOCK WRANGLER JK " BP600 BP600 BP KIT WRANGLER JK +"/+ " VM80000 VM80000 Estimated Lift: 0mm 67 SPRING: CONSTANT 0KGS 68 SPRING: CONSTANT 00KGS 60 60067 N98 PANHARD ROD EXTENSION BKT KIT - LHD FK7 PANHARD ROD EXTENSION BKT KIT - RHD FK9 TRIM PACKER OMEJKPR0 BP- SELECTION SHOCK WRANGLER JK " BP600 BP KIT WRANGLER JK " VM80000 SUSPENSION KIT Estimated Lift: 00mm " COMPLETE LIFT KIT OMEJKRHD OMEJK " COMPLETE LIFT KIT OMEJKRHDD OMEJKD V6 PETROL ENGINE PETROL ENGINE RHD MODELS FK Caster Kit will increase caster angel by o. Check manufacturer's specification if Caster Kit is required. When existing stock of N98 is exhausted no further product will be available. PETROL ENGINE LHD MODELS Estimated Lift: 00mm DIESEL ENGINE RHD MODELS DIESEL ENGINE LHD MODELS 6 7 For trim adjustment use - Front: OMEJKPF0 Rear: OMEJKPR0 Do not fit more than packer per coil spring. Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating the panhard rod to its original position. FK0 is a mandatory fitment for 006 To 008 Models when fitting OMESD8. Left hand drive only. 0 Models with.6l engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms. Kit includes: x Front Shocks, x Rear Shocks, x (pair) Front Coils, x (pair) Rear Coils, x Steering Damper, x Front Forged Panhard, x Bump Stop Kit, x Brakeline Relocation Kit, x Rear Panhard Bracket Kit, x Sway Bar Link Dis-connect Kit, x Caster & Driveline Kit, x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models), x Front Trim Packer, x Rear Trim Packer, x Display Carton. See page for kit breakdown. CHRYSLER JEEP 7.8 DIESEL ENGINE Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A OFF ROAD USE ONLY - CHRYSLER JEEP WRANGLER JK COMPLETE KIT COMMENTS 00mm ( Inch) LIFT KIT OMEJKRHD PETROL ENGINE RHD MODELS 00mm ( Inch) LIFT KIT OMEJK PETROL ENGINE LHD MODELS 00mm ( Inch) LIFT KIT OMEJKRHDD DIESEL ENGINE RHD MODELS 00mm ( Inch) LIFT KIT OMEJKD DIESEL ENGINE LHD MODELS KIT INCLUDES: x Front Shocks, x Rear Shocks, x (pair) Front Coils, x (pair) Rear Coils, x Steering Damper, x Front Forged Panhard, x Bump Stop Kit, x Brakeline Relocation Kit, x Rear Panhard Bracket Kit, x Sway Bar Link Dis-Connect Kit, x Caster & Driveline Kit, x Front Trim Packer, x Rear Trim Packer, x Display Carton. COILS 00mm LIFT - PETROL 6 00mm LIFT - DIESEL 07 SHOCKS - MID LENGTH 60066M - LONG 60066L BP- SELECTION SHOCK: JEEP + 6 BP600 Suitable for OMEJK Kits SHOCK: JEEP + 68 BP600 Longer travel front shock (other modifications required) KIT: JEEP + STEERING DAMPER VM80000 STABILISER OMESD8 COMPONENTS CASTER KIT FK Front caster only, increases caster by o CASTER & DRIVELINE KIT FK9 Adjust front caster and rear pinion angle BRAKELINE RELOCATION KIT (F&R) FK6 SWAY BAR LINK DIS-CONNECT KIT (F&R) FK8 Suits 00mm lift SWAY BAR LINK 6000 Link only, suits 00mm lift SWAY BAR LINK BUSH SET OMESB0 Suits Front Sway Bar Link 6000 LOWER CONTROL ARM LCAJKFR Suits SWB and Unlimited Models ( pair) UPPER CONTROL ARM UCAJKFR Suits SWB and Unlimited Models ( pair) PANRJK00 LHD, Fabricated, suits LHD only ADJUSTABLE PANHARD ROD PANRJK00 RHD BUMP STOP EXTENSION KIT (F&R) FK0 TRIM PACKER OMEJKPF0 0mm COILS 00mm LIFT - MEDIUM 6 00mm LIFT - CONSTANT 00KG 06 SHOCKS - LONG BP- SELECTION 60067L SHOCK: JEEP + 68 KIT: JEEP + BP6000 VM80000 COMPONENTS PANHARD BRACKET KIT FK7 LHD, suits 00mm lift FK7RHD RHD, suits 00mm lift SWAY BAR LINK 600 Link only, suits 00mm lift LOWER CONTROL ARM LCAJKRR Suits SWB & Unlimited Models ( pair) UPPER CONTROL ARM UCAJKRR Suits SWB & Unlimited Models ( pair) TRIM PACKER OMEJKPR0 Notification: Modifications for off - road use only The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer. Modifications and replacement of other associated components will be required. Lift increase is approximate and will depend on vehicle weights. Warranty Implications COMMENTS The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. 0 Models with.6l engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop. COMMENTS When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A RANGER PX 0 ON 9 Estimated Lift: 0mm SPRING: No Bar 997 STRUT SPORT 9009 SPRING: Bar 998 STRUT SPORT *9000 / 9009 SPRING: Bar / Winch 999 STRUT SPORT 9000 SPRING: No Bar: 0mm LIFT 08 STRUT SPORT 9009 BP- SELECTION: Estimated Lift: 0-0mm BP- COIL OVER RH BP9000R BP- COIL OVER LH BP9000L BP FIT KIT VM80000 TRIM PACKER FK6 UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH006 Estimated Lift: 0mm EL09R *600 / 600 SPRING: CONSTANT 00 KGS EL068R *600 / 600 SPRING: CONSTANT 600 KGS EL069R 600 BP- SELECTION BP- SHOCK RH BP6007R BP- SHOCK LH BP6007L BP FIT KIT VM80000 GREASABLE SHACKLE KIT OMEGS0 SPRING BUSH KIT OMESB0 OMESB0 OMEU66 U BOLTS OMEU66A OMEU66B DRIVELINE SPACER KIT FK7 EXTRA LEAF ELXL FORD DIESEL ENGINE 7 8 6 Important: Please refer to TSB00. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Trim Packer FK6 provides 0mm lift at the wheel. OMESB0 suits OE Shackle. OMESB0 Bush Kit suits OME Greasable Shackle OMEGS0. Use OMEU66 when fitting EL09R. Use OMEU66A when fitting EL068R and EL069R. Use OMEU66B when fitting EL069R with ELXL. Fitment of Driveline Spacer Kit FK7 is recommended to re-align driveline. 6 ELXL will give approximately 0mm extra lift or increase loading capacity at design height by approximately 00kg. 7 Strut Top Hat Kit may be required if original equipment is worn. 8 If a TAD0 Frontier tank is installed in the vehicle, when fitting the FK7 spacer kit, the tank will need to be lowered to allow removal of the centre bearing bolts. Page OME INT CAT. NO.8 SEPTEMBER 08 9

Contents!A TORSION BARS: OVER 60 KGS TORSION BARS FITTING KIT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS GREASABLE SHACKLE KIT U BOLTS SPRING BUSH KIT EXTRA LEAF CENTRE BOLT 00 000 600 N9 FK CS06R 600 EL09R 600 CS060R *600 / 600 OMEGS8 OMEU66 OMEU66A OMESB97 DXL / ELXL UCB9 FORD RANGER PJ/PK /006 TO 0 (NOT USA MANUFACTURED MODEL) PETROL & DIESEL ENGINES 6 6 6 6 Note: Some South American Models, built in Argentina, use torsion bars with hexagonal ends. Above OME suspension is not suitable for these Models. 6 FK Front Shock Absorber Upper Mount Support Bracket Kit is a mandatory fitment. Include tray weight in constant load calculation. Use OMEU66 when fitting CS06R and EL09R. Use OMEU66A when fitting CS060R. For Models with.td engine measure length of Torsion Bar to determine correct fitment. 000-9mm. 00-0mm. When remaining stock of N87 and N9 is exhausted no further product will be available. DXL and UCB9 suits CS06R and CS060R. ELXL suits EL09R. Conte COURIER/RANGER TONNE 98 TO 00 (NOT USA MANUFACTURED MODEL) TORSION BARS: OVER 60 KGS FITTING KIT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS U BOLTS GREASABLE SHACKLE KIT SPRING BUSH KIT EXTRA LEAF CENTRE BOLT PETROL & DIESEL ENGINES 000 600 N FK CS06R 600 CS07R 600 OMEU6 OMEGS8 OMESB8 D9XL UCB7 FK Support Brackets must be installed to upper front shock mounting brackets on late 996 On Models manufactured in Thailand. Include tray weight in constant load calculation. When remaing stock of N is exhausted no further product will be available. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A EVEREST 0 ON Estimated Lift: 0mm SPRING: No Bar 08 STRUT SPORT 9009 SPRING: Bar 997 STRUT SPORT *9000 / 9009 SPRING: Bar / Winch 998 STRUT SPORT 9000 TRIM PACKER FK6 UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH006 Estimated Lift: 0mm DIESEL ENGINE 06 60 SPRING: CONSTANT 00 KGS 07 *60 / 60 No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Trim Packer FK6 provides 0mm lift at the wheel. FORD Strut Top Hat Kit may be required if original equipment is worn. This kit includes rubber bushing. Re-use rear OE top damper forged bracket, bushes, dirt shield, bumpstops and fasteners for the assembly of the rear shock. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A FORD EXPLORER 996 TO 00 LEAF SPRING MODELS TORSION BARS Estimated Lift: 0mm EXTRA LEAF CENTRE BOLT V6 PETROL ENGINE - N6 CS0R N7 D0XL UCB FORD Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. OE spring bushes are required to fit CS0R springs. D0XL extra leaf should be fitted when a constant 00kg plus load is carried. Conte FORD F0 & F0 0 TO 07 Estimated Lift: mm ( inch) SPRING: MM 768 60 CASTER CORRECTION KIT FK8 Estimated Lift: 7-00mm ( inch to inch) SPRING: 7MM 07 60 SPRING: 00MM 076 60 PANHARD BRACKET FK69 RADIUS ARM DROP BRACKET KIT FK70 BRAKELINE BRACKET KIT FK7 SWAYBAR BRACKET KIT FK7 BUMP SPACER KIT FK7 TRIM PACKET (0mm) FK7 Estimated Lift: 7mm ( inch) SPRING: CONSTANT 0 KGS SPRING BUSH KIT U BOLTS - NO OVERLOAD LEAF U BOLTS - WITH OVERLOAD LEAF EXTRA LEAF CENTRE BOLT- OVERLOAD ONLY EL077R EL077R + EL0XL 60 OMESB09 OMEU77 OMEU78 EL0XL UCB DIESEL ENGINE DIESEL ENGINE 6 + 6 When fitting either 07 or 076 it is mandatory to fit Bump Spacer Kit FK7 to prevent the coil from being over stressed. OME front shock 60 is not suitable as an OE replacement. When fitting our longer OME shock 60 you must fit: - FK7 Brakeline Kit to extend / drop the brakelines - FK7 Swaybar Kit to lower the front swaybar - FK70 Radius Arm Drop Bracket Kit, if not fitted you may over stretch the front brakelines When bull bar and / or winch are fitted use FK7 on both coils to restore nominal lift height. Where the OE rear leaf spring has an overload leaf fitted, this overload leaf is to be fitted to the OME leaf, EL077R is to have its centre bolt replaced with a longer bolt UCB and OE spacer blocks are to be reused. Use OMEU77 when fitting to a vehicle without an overload leaf. Use OMEU78 when fitting to a vehicle with an overload leaf. Fitment of a FK8 Caster Correction Kit will provide approximately. to.0 degrees of extra caster. It is advisable to have a front end alignment carried out to determine if a FK8 kit is required. Page OME INT CAT. NO.8 SEPTEMBER 08

Conte Estimated Lift: mm ( inch) SPRING: MM 768 60 CASTER CORRECTION KIT FK8 SPRING: 7MM 07 60 SPRING: 00MM 076 60 PANHARD BRACKET RADIUS ARM DROP BRACKET KIT FK69 FK80 BRAKELINE BRACKET KIT FK7 SWAYBAR BRACKET KIT FK7 BUMP SPACER KIT FK7 TRIM PACKET (0mm) FK7 Estimated Lift: 7mm ( inch) SPRING: CONSTANT 0 KGS SPRING BUSH KIT U BOLTS - NO OVERLOAD LEAF U BOLTS - WITH OVERLOAD LEAF EXTRA LEAF CENTRE BOLT - OVERLOAD ONLY DIESEL ENGINE EL077R EL077R + EL0XL 60 OMESB09 OMEU79 OMEU80 EL0XL UCB FORD FORD F0 & F0 008 TO 00 Estimated Lift: 7-00mm ( inch to inch) DIESEL ENGINE + When fitting either 07 or 076 it is mandatory to fit Bump Spacer Kit FK7 prevent the coil from being over stressed. OME front shock 60 is not suitable as an OE replacement. When fitting longer OME shock 60 you must fit: - FK7 Brakeline Kit to extend / drop the brakelines - FK7 Swaybar Kit to lower the front swaybar - FK80 Radius Arm Drop Bracket Kit, if not fitted you may over stretch the front brakelines When bull bar and / or winch are fitted use FK7 on both coils to restore nominal lift height. Where the OE rear leaf spring has an overload leaf fitted, this overload leaf is to be fitted to the OME leaf, EL077R is to have its centre bolt replaced with a longer bolt UCB and OE spacer blocks are to be reused. 6 6 Use OMEU79 when fitting to a vehicle without an overload leaf. Use OMEU80 when fitting to a vehicle with an overload leaf. Fitment of a FK8 Caster Correction Kit will provide approximately. to.0 degrees of extra caster. It is advisable to have a front end alignment carried out to determine if a FK8 kit is required. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: mm SPRING: TO 00 KGS CASTER CORRECTION KIT THIRD STAGE SPRING:CONSTANT 600+KGS XL LEAF CENTRE BOLT U BOLTS - NO OVERLOAD LEAF U BOLTS - WITH OVERLOAD LEAF FITTING KIT SPACER KIT CS08R TSXL0 CS08R D7XL UCB0 N79 OMEU68 OMEU67 FK FK OMESK FORD FORD F0 & F0 00 TO 008 Estimated Lift: 0mm V8 DIESEL: COIL SPRING 768 N9 FK6 LEAF SPRING Springs are supplied with bushes fitted. Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL0 and the CS08R original centre bolt replaced by a UCB0, the original spacing block must also be re-fitted using U Bolts OMEU67. To maintain 0mm lift for loads over constant 600kgs add one () D7XL Extra Leaf. Fitment of Driveline Spacer Kit FK for Crew Cab or FK for Xtra Cab is recommended to reduce possible driveline vibration. If required, additional spacing down of the centre bearing can be achieved by using an OMESK Spacer Kit. Fitment of a FK6 Caster Correction Kit will provide approximately. to.0 degrees of extra caster. It is advisable to have a Front End Alignment carried out to determine if an FK6 kit is required. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A FORD F0 & F0 999 TO 00 7 Estimated Lift: 0mm SPRING: TO 0 KGS ADJUSTABLE PANHARD ROD U BOLTS - USA MODELS U BOLTS - BRAZIL MODELS Estimated Lift: 0mm CS08F 6 N78 APRF0 SPRING: TO 600 KGS CS08R CS08R THIRD STAGE - TSXL0 - SINGLE FITMENT N79 N79 - DUAL FITMENT N79 + N80 + - SPRING: CONSTANT 600 KGS CS08R CS08R XL LEAF D7XL D7XL THIRD STAGE - TSXL0 - SINGLE FITMENT N79 N79 - DUAL FITMENT N79 + N80 + - U BOLTS OMEU68 OMEU67 CENTRE BOLT UCB0 UCB0 FITTING KIT FK FK FK FK STONE GUARD KIT OME660 OME660 6 7 APRF0 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are supplied in rod. For F0 Models with dual shock fitment N79 must be fitted rear of the axle, as it is longer than the N80. For both F0 and F0 Models OME660 Stone Shields are also a recommended fitment to the rear shocks. To help maintain 0mm lift, add one D7XL Extra Leaf for every 00kgs carried over 600kgs. Fitment of FK to Crew Cab or FK to Xtra Cab Models is recommended to reduce possible driveline vibration. As the CS08R has a different spring camber, compared to the original spring, the overload leaf must be replaced with a TSXL0. The Original spacing block must be refitted. Springs are supplied with bushing. Springs are supplied with bushing. Incompatible with F0 Dual Axle Model. F0 PETROL & DIESEL CS08F N78 APRF0 OMEU69 OMEU69A OMEU70 OMEU70A FORD 6 F0 F0 PETROL & DIESEL OMEU69 - - F0 Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm 99 6007 SPRING: CONSTANT 00 KGS 99 6007 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Coil must be installed with progressive rate to the top. HOLDEN / ISUZU / GM JACKAROO/TROOPER & MONTEREY /00 TO 00 SWB & LWB TORSION BARS - 600 Conte JACKAROO/TROOPER & MONTEREY 99 TO /00 SWB & LWB TORSION BARS Estimated Lift: mm - 600 9 6007 SPRING: CONSTANT 00 KGS 99 6007 Coil must be installed with progressive rate to the top. Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TORSION BARS: OVER 0 KGS Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SHOCK BUSH KIT CONVERTER SPRING BUSH KITS U BOLTS ANTI INVERSION KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT HOLDEN / ISUZU / GM JACKAROO/ISUZU TROOPER 98 TO /99 000 600 CS08R 60009 600 *N / N89 CS09R *6006 / 60009 *6006 / 600 N OMEB OMESB80 OMEU9A FK OMEGS D9XL UCB6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Torsion Bar 000 suit Models from 8/88 To /9 only. Important: A minimum of 60mm of droop must be maintained. 60009 / 6006: Suits /'86 To /'9 Models and requires OMEB Bush Kit to convert lower bush from 9mm to 6mm ID. 6006 / 600 / N / N89: Suits Models '8 To 0/'86 (no bush kit required). Where the OE spring has leaves OMEU9A U Bolts are required. FK Anti Inversion Kit must be fitted if greasable shackles are not fitted. Conte GM ERA DOOR 999 TO 6/00 (USA - ISUZU RODEO WAGON) TORSION BARS Estimated Lift: 0mm - 600 9 N0 Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A GM ERA 99 TO 998 (USA - ISUZU RODEO WAGON) & DOOR UT MODELS TORSION BARS Estimated Lift: 0mm HOLDEN / ISUZU / GM - 600 9 6007 Conte Conte TRAILBLAZER 07 ON COLORADO 7 0 TO 06 MU-X 0 ON Conte Estimated Lift: 0mm SPRING: No Bar 07 STRUT - SPORT 900 SPRING: Bar 88 STRUT - SPORT *900 / 900 SPRING: Bar / Winch 869 STRUT - SPORT 900 TRIM PACKER OME9PF UPPER STRUT BUSHES OME COIL ISOLATER OMESB0 STRUT TOP HAT KIT OMETH00 Estimated Lift: 0mm 088 600 SPRING: CONSTANT 00 KGS 089 *60 / 600 SPRING: CONSTANT 00 KGS 090 60 DIESEL ENGINE MU-X COLORADO 7 & TRAILBLAZER 09 600 09 *60 / 600 09 60 No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. OME struts can only be installed with OME coils. Colorado 0/ To 06, due to change in top hat OMESB0 will be required for fitment of OME coils. Please note: Only needed for up to 0 Models. Not required for Trailblazer 07 On Models or Isuzu MU-X. Strut Top Hat Kit may be required if original equipment is worn. 600 and 60 cannot be used as a shock only OE replacement on Colorado 7/Trailblazer Models. Can be used as an OE replacement for Isuzu MU-X. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Conte DMAX 0 ON COLORADO 0 ON Estimated Lift: 0mm SPRING: No Bar 07 STRUT SPORT 900 SPRING: Bar 88 STRUT SPORT *900 / 900 SPRING: Bar / Winch 869 STRUT SPORT 900 SPRING: Bar, Winch & Accessories STRUT SPORT 900 TRIM PACKER OME9PF UPPER STRUT BUSHES OME COIL ISOLATOR OMESB0 STRUT TOP HAT KIT OMETH00 Estimated Lift: 0mm HOLDEN / ISUZU / GM DIESEL ENGINE EL07R 606 SPRING: CONSTANT 00 KGS EL07R *607 / 606 SPRING: CONSTANT 600 KGS EL07R 607 GREASABLE SHACKLE KIT SPRING BUSH KIT OMEGS OMESB98 OMESB07 U BOLTS OMEUA OMEUB EXTRA LEAF EL9XL HANDBRAKE CABLE FIT KIT FK66 FK87 6 No top mounting bushes supplied, use OME. OE bushes may be reused if in good condition. OME struts can only be installed with OME coils. 6 OMESB98 Bush Kit suits OME Greasable Shackle, OMEGS. OMESB07 Bush Kit suits OE Shackle. If fitting extra leaf to EL07R, use U Bolt OMEUB. Handbrake Cable Fit Kit FK66 required for Isuzu DMAX cab chassis and LSM Models. FK87 required for Colorado 06 On Models. Strut Top Hat Kit may be required if original equipment is worn. Colorado 0/ onwards, due to change in top hat OMESB0 will be required for fitment of OME coils. Please note: Only needed for up to 0 Models. Not required for Colorado 06 On Models or Isuzu DMAX. Page OME INT CAT. NO.8 SEPTEMBER 08

Conte Conte Conte DMAX 008 TO 0 COLORADO RC 008 TO 0 RODEO RA 00 TO 0 (NOT USA MANUFACTURED MODEL) TORSION BARS - NO LOAD 00 00 600 600 Estimated Lift: 0-0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS CENTRE BOLT ANTI INVERSION KIT GREASABLE SHACKLE KIT EXTRA LEAF HOLDEN / ISUZU / GM PETROL ENGINE CS06R 600 *N / N89 CS06R *6006 / 600 N OMESB80 OMEU66 UCB FK6 OMEGS D6XL DIESEL ENGINE Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers may contact the steering arm when on full lock. Fitter should check for this and where required a small indentation should be made to the body of the shock absorber. 00 torsion bars have a lighter rate than OE and improve ride comfort for vehicles with no front accessory weight. Due to their heavy rate, the OE torsion bars are suitable for vehicles with front accessory weight. Include tray weight in constant load calculation. CS06R and CS06R can be installed to high height x Models. OME leaf does not fit low height x Models. FK6 only needed if not fitting Greasable Shackle Kit. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A RODEO/DMAX TO 00 (NOT USA MANUFACTURED MODEL) TORSION BARS: OVER 0 KGS Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT ANTI INVERSION KIT GREASABLE SHACKLE KIT U BOLTS EXTRA LEAF CENTRE BOLT HOLDEN / ISUZU / GM PETROL & DIESEL ENGINES 000 600 CS08R 600 *N / N89 CS09R 6006 N OMESB80 FK OMEGS OMEU9A D9XL UCB6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Include tray weight in constant load calculation. FK must be fitted if OMEGS greasable shackles are not fitted. Vehicles with Leaf OE spring stack require U bolts OMEU9A. Conte DROVER (NOT USA MANUFACTURED MODEL) Estimated Lift: 0mm SPRING: TO KGS SPRING: TO 7 KGS SPRING BUSH KIT U BOLTS FITTING KIT TRIM PACKER STEERING DAMPER EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS TRIM PACKER EXTRA LEAF CENTRE BOLT CS0FA / B OME0 CS0FA / B OME0 OMESB9 OMEU6 OMEU6 FK06 TP0 OMESD0 D0XL UCB7 CS08R OME0 CS09R OME0 OMESB9 OMEU6 TP0 DXL UCB7 + + One only OMEU6 may be required on the right hand side inner, on some Models. ` Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A H Estimated Lift: 0mm TORSION BARS 00 9000 Estimated Lift: 0mm HUMMER Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm droop is maintained to prevent topping out of the front shock absorbers. Springs supplied with bushings. CS09R 600 EXTRA LEAF D6XL Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TERRACAN 00 ON Estimated Lift: 0mm Estimated Lift: 0mm 60 60060 SPRING: CONSTANT 00 KGS 60 60060 HYUNDAI TORSION BARS - 6000 PETROL & DIESEL ENGINE Contents!A SORENTO BL TO 009 Estimated Lift: 0mm SPRING: SPRING: 0 TO 60 KGS STRUT Estimated Lift: 0mm SPRING: LIGHT LOAD 90 60 N8S N7S + LHS RHS - - 6 N0 KIA LATE 006 ON MODELS OME66 Stone Guards are recommended fitment to vehicles driven on dirt roads to prevent stone damage to the shock absorbers. N7S fits RHS, N8S fits LHS. No top mounting bushes supplied, reuse OE bushes. MODELS 00 TO LATE 006 60 N9 90 N9 Contents!A NIVA Estimated Lift: 0mm SPRING: 79 NOT AVAILABLE TRIM PACKER OMELNF0 Estimated Lift: 0mm 79 NOT AVAILABLE LADA 00 On Models front lift less than 0mm. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LAND ROVER DISCOVERY 00 ON ALL COIL MODELS Estimated Lift: 0mm SPRING: CONSTANT 00 KGS STRUT PETROL & DIESEL ENGINES SPRING: 7 SPRING: 00 KGS + 7 STRUT USE OE Estimated Lift: 0mm 76 7 USE OE Coils are suitable to be used with original OE struts, OME will not be developing replacement struts. Conte DISCOVERY 999 TO 00 ALL COIL SUSPENSION MODELS Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING: TO 0 KGS STEERING DAMPER COIL PACKER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS COIL PACKER PETROL & DIESEL ENGINES 776 600 N07 777 600 N07 779 600 N07 OMESD0 OMELRCP 78 6006 76 600 76 600 OMELRCP On 00 Models lift will be between to mm. 8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. When remaining stock of N07 is exhausted no further product will be available. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A DISCOVERY TO 998 & RANGE ROVER TO /99 Estimated Lift: To 0mm SPRING: TO 0 KGS: 0mm 760-6007 - NF - SPRING: TO 0 KGS: 0mm 76 7 6007 6007 NF NF SPRING: TO 0 KGS 767 767 6007 6007 STEERING DAMPER OMESD OMESD CASTER KIT CALR CALR CALR CALR COIL PACKER OMELRCP OMELRCP Estimated Lift: 0mm 76 6008 SPRING: CONSTANT 00 KGS 76 6009 SPRING: CONSTANT 00 KGS 76 6009 COIL PACKER OMELRCP LAND ROVER PETROL ENGINES CALR : Fits pre '86 Range Rover. CALR : Fits post '86 Range Rover, all Discovery and Defender 0 Dual Cab Utility. NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems. DIESEL ENGINES 8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. Not suitable for Models with air suspension. When remaining stock of NF is exhausted no further product will be available. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A DEFENDER & COUNTY 0 Estimated Lift: To 0mm LAND ROVER V8 PETROL ENGINES.9 ISUZU DIESEL ENGINES SPRING: TO 0 KGS: 0mm Lift 76 6007 NF SPRING: TO 0 KGS 7 6007 STEERING DAMPER OMESD CASTER KIT CALR CALR COIL PACKER OMELRCP Estimated Lift: To 0mm SPRING: TO 0 KGS: 0mm Lift SPRING: TO 0 KGS STEERING DAMPER CASTER KIT COIL PACKER Estimated Lift: To mm SPRING: LIGHT LOAD: mm Lift SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS COIL PACKER. DIESEL ENGINES 7 6007 NF 767 6007 OMESD CALR CALR OMELRCP 7 6008 7 6009 7 6009 OMELRCP 6007 NF 766 6007 OMESD CALR OMELRCP Caution: Due to altered gearbox mounts on Models after 998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front double cardan joints. Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if Caster Kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. 7 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only. OE springs are designated as medium load springs. Original inner helper coil, where fitted, must be re-installed with OME Coils. 766 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. When remaining stock of NF is exhausted no further product will be available. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A DEFENDER 0 LONG TRAVEL Estimated Lift: To 0mm LAND ROVER SPRING: NO BAR 06 6008 SPRING: BAR / BAR & WINCH 06 *60070 / 6008 STEERING DAMPER OMESD CASTER KIT CALR CALR COIL PACKER OMELRCP Estimated Lift: To 0mm 06 6008 SPRING: CONSTANT 00 KGS 06 *60070 / 6008 SPRING: CONSTANT 00 KGS 066 60070 UPPER SHOCK MOUNT FK6 COIL PACKER OMELRCP & BUMP SPACER KIT SWAY BAR SPACER KIT.L DIESEL ENGINES FK6 FK6 Caution: Front driveshaft MUST be replaced / modified with Double Cardan Joints and checked for Uni bind with OME shocks installed at droop. FK6, FK6 & FK6 are mandatory fitment also. When fitting coil springs recommended, you must use 6008 / 60070 shock absorbers to achieve minimum down travel requirement. When fitting 6008 / 60070 the following are mandatory requirements: * Fit longer coils 06-066 for springs to remain trapped with shocks fully extended * Fit FK6 to prevent shock damage * Fit FK6 for front driveshaft clearance and rear extended travel * Fit FK6 which replaces OE upper shock mount when fitting rear shocks * Remove any inner helper coils already fitted Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if Caster Kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. Important: 06 has reduced spring rate from OE to provide improved ride quality for light loads. FITTING KITS Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A DEFENDER 0 MODEL Estimated Lift: 0mm Lift SPRING: CONSTANT 00 KGS COIL PACKER 6009 7 6009 OMELRCP SPRING: TO 0 KGS 7 6007 NF SPRING: TO 0 KGS 767 6007 STEERING DAMPER OMESD CASTER KIT CALR CALR COIL PACKER OMELRCP Estimated Lift: To 0mm SPRING: LIGHT LOAD: mm LAND ROVER. DIESEL ENGINE DIESEL ENGINE 7 Caution: Due to altered gearbox mounts on Models after 998 any lift above OE ride height will cause front driveline vibration that can only be rectified by fitment of front double cardan joints. Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if Caster Kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. Important: 7 has reduced spring rate from OE to provide improved ride quality for light loads. Original inner helper coil, where fitted, must be reinstalled with OME coils. 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible overstressing of the spring, only one packer can be fitted under each coil seat. Original inner helper coil, where fitted, must be re-installed with OME coils. When remaining stock of NF is exhausted no further product will be available. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A DEFENDER 0 LONG TRAVEL Estimated Lift: To 0mm.L DIESEL ENGINES SPRING: NO BAR 06 6008 SPRING: BAR / BAR & WINCH 06 *60070 / 6008 STEERING DAMPER OMESD CASTER KIT CALR CALR COIL PACKER OMELRCP Estimated Lift: To 0mm SPRING: LIGHT LOAD mm 06 Lift SPRING: CONSTANT 00 KGS *60070 / 6008 066 60070 UPPER SHOCK MOUNT FK6 COIL PACKER OMELRCP & BUMP SPACER KIT SWAY BAR SPACER KIT LAND ROVER FK6 FK6 FITTING KITS Caution: Front driveshaft MUST be replaced / modified with Double Cardan Joints and checked for Uni bind with OME shocks installed at droop. FK6, FK6 & FK6 are mandatory fitment also. When fitting coil springs recommended, it is mandatory use 6008 / 60070 shock absorbers to achieve minimum down travel requirement. When fitting 6008 / 60070 the following are mandatory requirements: * Fit longer coils 06-066 for springs to remain trapped with shocks fully extended * Fit FK6 to prevent shock damage * Fit FK6 for front driveshaft clearance and rear extended travel * Fit FK6 which replaces OE upper shock mount when fitting rear shocks * Remove any inner helper coils already Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if Caster Kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. 8mm Steel Coil Seat Packer, refer to selection chart supplied with packer. Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat. Important: 06 has reduced spring rate from OE to provide improved ride quality for light loads. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A 90 SERIES Estimated Lift: 0mm SPRING: TO 0 KGS 76 7 6007 6007 NF - SPRING: TO 0 KGS 7 767 6007 6007 STEERING DAMPER OMESD OMESD CASTER KIT CALR CALR CALR CALR Estimated Lift: - mm 76 SPRING: CONSTANT 00 KGS 6008 76 6009 LAND ROVER PETROL ENGINE When remaining stock of NF is exhausted no further product will be available. DIESEL ENGINE Caution: Due to altered gearbox mounts on Models after 998 any lift above OE ride height may cause front driveline vibration that can only be rectified by fitment of front double cardan joints. Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if Caster Kit is required. CALR suits 8mm wide control arms. CALR suits mm wide control arms. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A BT-0 0 ON 9 Estimated Lift: 0mm SPRING: No Bar 997 STRUT SPORT 9009 SPRING: Bar 998 STRUT SPORT *9000 / 9009 SPRING: Bar / Winch 999 STRUT SPORT 9000 SPRING: No Bar: 0mm LIFT 08 STRUT SPORT 9009 BP- SELCTION: Estimated Lift 0-0mm BP- COIL OVER RH BP- COIL OVER LH BP- FIT KIT TRIM PACKER UPPER STRUT BUSHES STRUT TOP HAT KIT Estimated Lift: 0mm No top mounting bushes supplied, use OME. OE bushes may be re-used Trim Packer FK6 provides 0mm lift at the wheel. MAZDA DIESEL ENGINE BP9000R BP9000L VM80000 FK6 OME OMETH006 EL09R *600 / 600 SPRING: CONSTANT 00 KGS EL068R *600 / 600 SPRING: CONSTANT 600 KGS EL069R 600 BP- SELECTION BP- SHOCK RH BP6007R BP- SHOCK LH BP6007L BP- FIT KIT VM80000 GREASABLE SHACKLE KIT SPRING BUSH KIT OMEGS0 OMESB0 OMESB0 OMEU66 U BOLTS OMEU66A OMEU66B DRIVELINE SPACER KIT EXTRA LEAF FK7 ELXL 8 6 6 7 if in good condition. OMESB0 suits OE Shackle. OMESB0 Bush Kit suits OME Greasable Shackle OMEGS0. Use OMEU66 when fitting EL09R. Use OMEU66A when fitting EL068R and EL069R. Use OMEU66B when fitting EL069R with ELXL. Fitment of Driveline Spacer Kit FK7 is recommended to re-align driveline. ELXL will give approximately 0mm extra lift or increase loading capacity at design height by approximately 00kg. Strut Top Hat Kit may be required if original equipment is worn. 7 8 9 If a TAD0 Frontier tank is installed in the vehicle, when fitting the FK7 spacer kit, the tank will need to be lowered to allow removal of the centre bearing bolts. Important: Please refer to TSB00. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TORSION BARS: OVER 60 KGS FITTING KIT Estimated Lift: 0mm 00 600 N9 FK CS06R 600 SPRING: CONSTANT 00 KGS EL09R 600 SPRING: CONSTANT 00 KGS CS060R *600 / 600 GREASABLE SHACKLE KIT OMEGS8 U BOLTS OMEU66 OMEU66A SPRING BUSH KIT OMESB97 EXTRA LEAF DXL / ELXL CENTRE BOLT UCB9 MAZDA BT-0 TONNE /006 TO 0 PETROL & DIESEL ENGINES Some Latin American /006 On Models use 000 torsion bars, measuring 9mm in length. The 00 torsion bars measure 0mm. Check OE torsion bar length before ordering. FK Front Shock Absorber Upper Mount Supporting Bracket Kit is a mandatory fitment. Use OMEU66 when fitting CS06R and EL09R. Use OMEU66A when fitting CS060R. Include tray weight in constant load calculation. When remaining stock of N87 and N9 is exhausted no further product will be available. DXL and UCB9 suits CS06R and CS060R. EL0XL suits EL09R. Conte B SERIES TONNE 987 TO 006 TORSION BARS: OVER 60 KGS FITTING KIT Estimated Lift: 0mm CS06R 600 SPRING: CONSTANT 00 KGS CS07R 600 U BOLTS OMEU6 GREASABLE SHACKLE KIT OMEGS8 SPRING BUSH KIT OMESB8 EXTRA LEAF D9XL CENTRE BOLT UCB7 PETROL & DIESEL ENGINES 000 600 N FK FK Front Shock Absorber Upper Mount Supporting Bracket Kit is a mandatory fitment. Include tray weight in constant load calculation. When remaining stock of N is exhausted no further product will be available. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm 00 60 MERCEDES G-WAGON G0 BLUETECH / G AMG MODELS Estimated Lift: 0mm SPRING: No Bar 08 STRUT SPORT 60 SPRING: Bar Or Winch 09 STRUT SPORT 60 Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A MITSUBISHI PAJERO 007 ON ALL LWB MODELS (/006) V6 PETROL ENGINE.8 &. DIESEL ENGINES Estimated Lift: 0-0mm SPRING: NO BAR 08 9 STRUT - SPORT 90006 90006 SPRING: BAR ONLY 9 09 STRUT - SPORT *90007 / 90006 *90007 / 90006 SPRING: BAR & WINCH 09 9 STRUT - SPORT 90007 90007 UPPER STRUT BUSHES OME0 OME0 STRUT TOP HAT KIT OMETH007 OMETH007 Estimated Lift: 0-0mm It is recommended that a wheel alignment is carried out. SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS 0 6009 600 600 No top mounting bushes supplied, use OME0. OE bushes may be reused if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Conte PAJERO / MONTERO 000 TO 006 ALL LWB MODELS (To 0/06) Estimated Lift: mm SPRING: TO 0 KGS 9 STRUT - SPORT 90006 SPRING: TO 00 KGS 9 STRUT - SPORT 90007 UPPER STRUT BUSHES OME0 STRUT TOP HAT KIT OMETH007 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS V6 PETROL ENGINE 97 6009 98 600 99 600 9 90006 9 90007 OME0 OMETH007.8 &. DIESEL ENGINES It is recommended that a wheel alignment is carried out. No top mounting bushes supplied, use OME0. OE bushes may be reused if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Conte Estimated Lift: mm SPRING: TO 0 KGS STRUT - SPORT SPRING: TO 00 KGS STRUT - SPORT UPPER STRUT BUSHES STRUT TOP HAT KIT SPRING: CONSTANT 00 KGS MITSUBISHI PAJERO / MONTERO 000 ON ALL SWB MODELS Estimated Lift: 0mm V6 PETROL ENGINE 9 90006 9 90007 OME0 OMETH007 99 6009 97 600 9 90006 9 90007 OME0 OMETH007. DIESEL ENGINE It is recommended that a wheel alignment is carried out. No top mounting bushes supplied, use OME0. OE bushes may be reused if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Conte PAJERO / MONTERO 99 TO 999 SWB & LWB LEAF SPRING MODELS TORSION BARS: OVER 0 KGS Estimated Lift: - 0mm SPRING: CONSTANT 0 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT 000 00 6000 N8 CS0R 6007 CS0R *6006 / 6007 OMESB8 OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 000 suits 88 To 90 V6 Models and all Models 9 To 9 - length 78mm. 00 suits all Models 9 To 00 - length 08mm. OMESB8 must be used to fit OME springs. When remaining stock of N8 is exhausted no further product will be available. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Conte Conte TORSION BARS: OVER 0 KGS Estimated Lift: To 0mm SPRING: CONSTANT 00 KGS TORSION BARS Estimated Lift: 0mm MITSUBISHI PAJERO / MONTERO 99 TO 999 ALL LWB COIL SPRING MODELS 000 00 6000 N8 90 600 98 600-6000 N8 9 600 PAJERO / MONTERO 99 TO 999 ALL SWB COIL SPRING MODELS Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. When remaining stock of N8 is exhausted no further product will be available. 000 suits all Models 9 To 9 with 78mm length. 00 suits all Models 9 To 00 with 08mm length. Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. When remaining stock of N8 is exhausted no further product will be available. Conte PAJERO / MONTERO TO 99 LEAF SPRING MODELS (Hyundai Galloper) TORSION BARS: OVER 0 KGS Estimated Lift: - 0mm SPRING: CONSTANT 0 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT CYLINDER ENGINE 0009 600 CS0R 6007 CS0R *6006 / 6007 OMESB8 OMEU OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 0009 suits 8 To 90 cylinder Models - length 78mm. OMESB8 must be used with CS0R and CS0R springs. OMEU only required on SWB Models. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PAJERO CHALLENGER 989 TO 99 COIL SPRING MODELS (Hyundai Galloper) (USA - MONTERO SPORT) TORSION BARS: OVER 0 KGS Estimated Lift: mm MITSUBISHI 000 600 90 6006 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 000 suits 88 To 90 V6 Models. Conte TRITON / L00 MQ ALL X MODELS Estimated Lift: mm SPRING: NO BAR STRUT - SPORT SPRING: BAR STRUT - SPORT SPRING: BAR / WINCH STRUT - SPORT SPRING: BAR / WINCH / ACCESSORIES STRUT - SPORT UPPER STRUT BUSHES STRUT TOP HAT KIT Estimated Lift: 0mm 0 900 0 900 0 900 0 900 OME OMETH00 EL086R 608 SPRING: CONSTANT 00 KGS EL087R *609 / 608 SPRING: CONSTANT 600 KGS EL088R *600 / 609 GREASABLE SHACKLE KIT OMEGS SPRING BUSH KIT OMESB U BOLTS OMEU OMEUA EXTRA LEAF ELXL 6 6 No top mounting bushes supplied use OME. OE bushes may be reused if in good condition. No dirt shield supplied, please re-use OE. Strut Top Hat Kit OMETH00 may be required if original equipment is worn. Shock absorber 600 is suited for constant rear loading in excess of 800kgs. OMESB suits OE Shackle and OME Greasable Shackle, OMEGS. Use OMEUA when fitting EL087R and EL088R. Use OMEU when fitting EL086R. ELXL will give approximately 0mm extra lift or increase loading capacity at design height by approximately 00kgs. Page 60 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: NO BAR 60 STRUT - SPORT 90008 STRUT N86S SPRING: BAR ONLY 606 STRUT - SPORT 90008 STRUT N86S SPRING: BAR & WINCH 07 STRUT - SPORT 90008 STRUT N86S UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS SPRING: CONSTANT 800 KGS MITSUBISHI TRITON / L00 ML & MN 006 TO 0 Estimated Lift: 0mm Estimated Lift: 0mm U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT CS0R 6006 N9 CS0R 6006 N9 CS0R 6006 N9 CS0R 6006 N9 OMEU7 OMEU76 OMESB8 OMEGS6 DIESEL ENGINE DXL UCB 6 90008 N86S 60 90008 N86S 606 90008 N86S OME OMETH00 V6 PETROL ENGINE 8 8 6 7 6 6 6 7 8 OMEGS6 is a mandatory fitment to prevent springs from inverting. OMESB8 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME Bush Kit. Reverse centre bolt to allow fitment. No top mounting bushes supplied, use OME. OE bushes may be reused if in good condition. OMEU7 is to be used with CS0R and CS0R. OMEU76 is to be used with CS0R and CS0R. DXL suitable for CS0R and CS0R. Strut Top Hat Kit may be required if original equipment is worn. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TRITON / L00 MK 0/996 TO 006 TORSION BARS: OVER 0 KGS Estimated Lift: To 0mm SPRING: CONSTANT 00 KGS U BOLTS SPRING BUSH KIT ANTI-INVERSION KIT GREASABLE SHACKLE KIT MITSUBISHI PETROL & DIESEL ENGINES 0006 6000 N8 CS0R 6000 N0E CS0R 6000 N0E OMEU7 OMESB8 FK0 OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Torsion bar 0006 suits 99 On Models with 9 splines. OMESB8 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME bush kits. FK0 Anti-Inversion Kit is a mandatory fitment, with or without Greasable Shackle Kit. When remaining stock of N8 is exhausted no further product will be available. Conte TRITON / L00 TO 996 TORSION BARS: OVER 0 KGS Estimated Lift: To 0mm PETROL & DIESEL ENGINES 0006 600 CS0R 6008 N0E SPRING: CONSTANT 00 KGS CS0R 6008 U BOLTS SPRING BUSH KIT OMEU7 OMESB8 ANTI-INVERSION KIT FK0 GREASABLE SHACKLE KIT OMEGS6 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Torsion bar 0006 suits 99 On Models with 9 splines. OMESB8 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME bush kits. FK0 Anti-Inversion Kit is a mandatory fitment, with or without Greasable Shackle Kit. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A CHALLENGER / MONTERO SPORT KH 00 ON MODELS Estimated Lift: 0mm SPRING: NO BAR 6 STRUT - SPORT 90008 STRUT N86S SPRING: BAR ONLY STRUT - SPORT 60 90008 STRUT N86S SPRING: BAR & WINCH 606 STRUT - SPORT 90008 STRUT N86S UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 Estimated Lift: mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS MITSUBISHI V6 PETROL ENGINE 90 60076 N6 98 *6007 / 60076 N6 88 6007 N6 Strut Top Hat Kit may be required if original equipment is worn. 60 90008 N86S 606 90008 N86S 90008 N86S OME OMETH00 No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. DIESEL ENGINE Conte CHALLENGER / MONTERO SPORT 000 TO 008 LWB (COIL MODELS) TORSION BARS: OVER 0 KGS Estimated Lift: 0mm 9 6009 N6 SPRING: CONSTANT 00 KGS 90 6009 N6 V6 PETROL ENGINE 00 6000 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TORSION BARS: OVER 0 KGS Estimated Lift: mm MITSUBISHI CHALLENGER V6 / MONTERO SPORT WAGON PA 998 TO 000 ( LEAF SPRING MODELS) SPRING: CONSTANT 00 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT V6 PETROL ENGINE 00 6000 CS00R 6007 CS0R *6006 / 6007 OMESB8 OMEGS6 D7XL UCB Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. 00 suits all Models with bar - length 08mm. OMEGS6 is a mandatory fitment to prevent springs from inverting. OMESB8 is a mandatory fitment to OME springs only. Include tray weight in constant load calculation. Springs can only be installed with OME Bush Kit. The Centre Bolt on CS00R must be reversed prior to fitment. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm SPRING: No Bar 977 STRUT - SPORT 900 SPRING: Bar 978 STRUT - SPORT *900 / 900 SPRING: Bar / Winch 979 STRUT - SPORT 900 BP- SELECTION COIL OVER PATROL Y6 LH BP90008L COIL OVER PATROL Y6 RH BP90008R BP KIT PATROL Y6 VM800000 NISSAN PATROL Y6 00 ON (NON HBMC MODELS) Estimated Lift: 0mm V8 PETROL ENGINE 986 6008 SPRING: CONSTANT 00 KGS 987 6008 SPRING: CONSTANT 00 KGS 988 6008 BP- SELECTION SHOCK PATROL Y6 BP6009 BP KIT PATROL Y6 VM80000 It is recommended that a wheel, wheel alignment is carried out. No top mounting bushes supplied, re-use OE bushes. ARMOURD APPLICATION -.T GVM is available refer page 0 for details Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Notification: Modifications for off - road use only The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer. Modifications and replacement of other associated components will be required. Lift increase is approximate and will depend on vehicle weights. Warranty Implications OFF ROAD USE ONLY - NISSAN PATROL Y60 & Y6 LWB COMMENTS COILS 7mm LIFT - SPRING TO 0KG 0 lbf/in 7mm LIFT - SPRING TO 0KG 00mm LIFT - SPRING TO 0KG 00mm LIFT - SPRING TO 0KG mm LIFT - SPRING TO 0KG 0 06 0 lbf/in 0 lbf/in 0 lbf/in 0 lbf/in SHOCKS BP- SELECTION 600L Suits 7mm & 00mm coils SHOCK: PATROL GU LONG BP KIT: GU BP60007 VM80000 Suits 7mm & 00mm coils STEERING DAMPER OMESD GQ pre 8/89 models STABILISER OMESD6 GQ 8/89 on models OMESD GU pre 0/00 models OMESD0 GU 0/00 on models COMPONENTS ADJUSTABLE PANHARD ROD PANR00 Pre 0/00 wagon CC models, RHD only PAN097A Pre 0/00 models, LHD only ADJUSTABLE PANHARD ROD WITH SPH PANR08X BEARING 0/00 on models not CC, RHD only SPHERICAL BEARING TO SUIT PANHARD OME098 Suits OE and Adjustable 0/00 on COIL SPRING TRIM PACKER OMEGQPF0 mm COIL SPRING TRIM PACKER OMEGQPF0 0mm GEARBOX PACKER KIT GQGK0 GQ only COMMENTS COILS 7mm LIFT - MEDIUM 90 lbf/in 7mm LIFT - CONSTANT 00KG 7mm LIFT - CONSTANT 00KG 0 0 00 lbf/in 70 lbf/in, coil tower reinforcing recommended 00mm LIFT - MEDIUM 6 90 lbf/in 00mm LIFT - CONSTANT 00KG 07 00 lbf/in 00mm LIFT - CONSTANT 00KG 08 70 lbf/in, coil tower reinforcing recommended mm LIFT - MEDIUM 7 90 lbf/in SHOCKS BP- SELECTION 600L Suits 7mm & 00mm coils SHOCK: PATROL GU LONG BP KIT: GU BP60008 VM80000 Suits 7mm & 00mm coils COMPONENTS ADJUSTABLE PANHARD ROD PANR00 Pre 0/00 wagon CC models, RHD & LHD ADJUSTABLE PANHARD ROD WITH SPH PANR09X 0/00 on models not CC, RHD & LHD BEARING SPHERICAL BEARING TO SUIT PANHARD OME098 Suits OE and Adjustable 0/00 on HEAVY DUTY LOWER TRAILING ARMS LTA0 Standard Length ADJUSTABLE UPPER TRAILING ARMS UTAA06 0mm on car adjustable TRIM PACKER OMEGQPR0 mm TRIM PACKER OMEGQPR0 0mm The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page 66 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING: 0 KGS: 0mm LIFT BP- SELECTION SHOCK PATROL GU BP KIT PATROL GU CASTER KIT STEERING DAMPER TRIM PACKER OIL PAN PACKER KIT Estimated Lift: 0mm PETROL.,.8 & DIESEL. 970 97 60 60 N9 N9 97 970 600 600 N9 N9 97 97 60 60 N9 N9 BP6000 VM80000 OMECA77B OMESD OMESD0 OMEGQPF0 OMEGQPF0 FK 980 60 N9 SPRING: CONSTANT 00 KGS 98 600 N9 SPRING: CONSTANT 00 KGS 98 6 600 N9 SPRING: MEDIUM 0mm LIFT 98 60 N9 BP- SELECTION SHOCK PATROL GU BP60006 7 BP KIT PATROL GU VM80000 TRIM PACKER Do not use Packers SWAY BAR EXT KIT FK8 FK NISSAN PATROL GU Y6 ALL LWB MODELS Estimated Lift: 0mm BP6000 VM80000 OMECA77B OMESD OMESD0 OMEGQPF0 OMEGQPF0 FK Coil trim packers may be required to trim vehicles. Packers must be installed to the bottom of front coils. OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK may be required for some European Models when Caster Kit is fitted. FK8: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage to sway bar when suspension is at full extension. FK suits Models with detachable sway bar. Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend fitment of gear box packers. DIESEL.8 &.0 TURBO 6 7 OMESD steering damper fits all Models To /000. OMESD0 fits /000 On Models. To verify correct fitment for individual vehicles compare OE mounts with Steering Stabilisers Specifications on page 66. It is highly recommended to reinforce coil towers if fitting heavy rear springs. Fitment to vehicle with original exhaust, if larger exhaust fitted some modifications to exhaust may be required. Page 67 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PATROL GU Y6 SWB MODELS Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS BP- SELECTION SHOCK PATROL GU BP KIT PATROL GU TRIM PACKER STEERING DAMPER CASTER KIT OIL PAN PACKER KIT Estimated Lift: 0mm SPRING: LIGHT LOAD GQ0A 60 N9 GQ0B 60 N9 SPRING: CONSTANT 00 KGS GQ0D 600 N9 BP- SELECTION SHOCK PATROL GU BP60006 BP KIT PATROL GU VM80000 SWAY BAR EXTENSION KIT FK8 FK GEAR BOX PACKER KIT GQGK0 TRIM PACKER OMEGQPR0 OMEGQPR0 OMESD0 fits /000 On Models. OMESD fits all Models To /000..8 &.0 TURBO DIESEL 97E 60 N9 97E 600 N9 BP6000 VM80000 OMEGQPF0 OMEGQPF0 OMESD0 OMESD OMECA77B FK NISSAN 6 6 OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK x Oil Pan Kits must be installed when OMECA77B Caster Kit or GQGK0 Gear Box Packer Kit are fitted. FK8: Rear Sway Bar Extension Bracket is mandatory fitment to Models with fixed sway bar to prevent damage to sway bar when suspension is at full extension. FK suits Models with detachable sway bar. GQGK0 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. In some cases two () kits may be required. Fitment to vehicle with original exhaust, if larger exhaust fitted some modifications to exhaust may be required. Page 68 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PATROL GU Y6 ALL COIL CAB CHASSIS MODELS Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS BP- SELECTION SHOCK PATROL GU BP KIT PATROL GU STEERING DAMPER CASTER KIT TRIM PACKER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS BP- SELECTION SHOCK PATROL GU BP KIT PATROL GU SWAY BAR EXTENSION KIT TRIM PACKER 970 97 60 60 N9 N9 97 970 600 600 N9 N9 BP6000 VM80000 OMESD OMECA77B OMEGQPF0 OMEGQPF0 98 60 N9 98 600 N9 98 600 N9 BP60006 VM80000 FK8 Do not use Packers NISSAN ALL. DIESEL ENGINES BP6000 VM80000 OMESD OMECA77B OMEGQPF0 OMEGQPF0 Coil trim packers may be required to trim vehicle to a maximum of mm. Packers must be installed to the bottom on front coil. OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK8 Rear Sway Bar Extension Bracket is mandatory fitment to prevent damage to sway bar when suspension is at full extension..0 TURBO DIESEL ENGINE Fitment to vehicle with original exhaust, if larger exhaust fitted some modifications to exhaust may be required. Page 69 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PATROL GU Y6 CAB CHASSIS COIL: / LEAF: Estimated Lift: 0mm SPRING: TO 0 KGS 970 97 600 600 N9 N9 SPRING: TO 0 KGS 97 970 600 600 N9 N9 STEERING DAMPER OMESD OMESD CASTER KIT OMECA77B OMECA77B TRIM PACKER OMEGQPF0 OMEGQPF0 OMEGQPF0 OMEGQPF0 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT ANTI INVERSION KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT U BOLT BRAKE PROPORTIONING BRACKET EXTRA LEAF CENTRE BOLT ALL. DIESEL ENGINES CS06RA/B 600 N CS06RA/B 600 N OMESB6 FK08 OMEGS OMEGP OMEU6 FK78 DXL UCB NISSAN + +.0 TURBO DIESEL ENGINE Coil trim packers may be required to trim vehicle to a maximum of mm per coil. Packers must be installed to the bottom on front coils. OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. For improved ride quality on vehicles carrying medium loads remove the rd leaf. Include tray weight in constant load calculation. Page 70 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PATROL GQ Y60 ALL SWB & LWB MODELS Estimated Lift: 0-0mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING: 0 KGS: 0mm LIFT BP- SELECTION SHOCK PATROL BP KIT PATROL TRIM PACKER STEERING DAMPER CASTER KIT Estimated Lift: 0-0mm SPRING: LIGHT LOAD SPRING: CONSTANT 00 KGS BP- SELECTION SHOCK PATROL BP KIT PATROL TRIM PACKER GEAR BOX PACKER KIT 97 97 60 60 *N / NF 6 *N / NF 6 976 97 600 600 N 6 N 6 97 NOT APPLICABLE 60 - *N / NF 6 - BP- SELECTION BP6000 BP6000 VM80000 VM80000 OMEGQPF0 OMEGQPF0 OMEGQPF0 OMEGQPF0 OMESD6 OMESD6 OMESD OMESD OMECA77B OMECA77B GQ0C 60 GQ0AM 60 N9 GQ0J 600 N9 GQ0LP 60 N9. ENGINE LWB MODEL BP60006 VM80000 Do not use Packers GQGK0 NISSAN LPG CONVERSION.8 &.0 ENGINES SWB MODEL GQ0CM 60 GQ0C 60 N9 GQ0G 600 N9 LPG CONVERSION GQ0LP 60 N9 BP- SELECTION BP60006 VM80000 Do not use Packers GQGK0 7 7 Coil trim packers may be required to trim vehicle to a maximum of mm per coil. Packers must be installed to the top on rear coils and to the bottom on front coils. 6 7 OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. LPG conversion equated to 00- litre rear mounted gas tank and a 70-7 litre mid mounted auxiliary petrol tank. OMESD6 fits 8/89 On Models. OMESD fits pre 8/89 Models. When remaining stock of N and NF is exhausted no further product will be available. Fitment to vehicle with original exhaust, if larger exhaust fitted some modifications to exhaust may be required. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: TO 0 KGS 97 60 NF SPRING: TO 0 KGS 976 600 N BP- SELECTION SHOCK PATROL BP6000 BP KIT PATROL VM80000 TRIM PACKER OMEGQPF0 OMEGQPF0 STEERING DAMPER OMESD6 CASTER KIT OMECA77B Estimated Lift: 0-0mm 0mm LIFT SPRING: CONSTANT 00 KGS BP- SELECTION SHOCK PATROL BP KIT PATROL TRIM PACKER GEAR BOX PACKER KIT GQ0C 60 GQ0J 600 N9 BP60006 VM80000 OMEGQPR0 OMEGQPR0 GQGK0 NISSAN PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS Estimated Lift: 0mm. ENGINES Coil trim packers may be required to trim vehicle to a maximum of mm per coil. Packers must be installed to the top on rear coils and to the bottom on front coils. 6 6 OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. Include tray weight in constant load calculation. Gearbox Packer Kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft flange angle thereby reducing driveline vibration. When remaining stock of N and NF is exhausted no further product will be available. Fitment to vehicle with original exhaust, if larger exhaust fitted some modifications to exhaust may be required. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT STEERING DAMPER CENTRE BOLT SPACER KIT EXTRA LEAF CENTRE BOLT Estimated Lift: mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT U BOLTS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT CS00F 60068 CS00F 60068 OMESB OMEGS OMEGP OMESD CBS0 DXL UCB CS06RA/B 600 N CS06RA/B 600 N OMESB6 OMEGS OMEGP OMEU8B FK08 DXL UCB NISSAN PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS Estimated Lift: 0mm. ENGINE + + CBS0 x centre bolt spacers required for front spring fitment. FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. Include tray weight in constant load calculation. Remove rd leaf for vehicles requiring 00kg constant load springs. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: TO 0 KGS SPRING: -00 KGS SPRING BUSH KIT EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS EXTRA LEAF CENTRE BOLT PETROL & DIESEL ENGINES CS06F N9 CS06F N9 OMESB OMESB9 OMEU6 OMEU7 D0XL UCB7 CS0R N89 CS0R *N / N89 OMESB OMESB9 OMEU8 DXL UCB NISSAN PATROL MQ 60 LWB SPANISH BUILT ALL.8TD MODELS Estimated Lift: 0-0mm U BOLTS To improve ride quality remove rd leaf from top of spring. Front U Bolt: OMEU6 fits to right hand side. OMEU7 fits to left hand side. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A STEERING DAMPER EXTRA LEAF CENTRE BOLT SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS EXTRA LEAF CENTRE BOLT CS00FA / B EARLY *N7/N96 LATE N9 CS0FA / B EARLY *N7/N96 LATE N9 OMESB8 OMESB9 OMESB OMESB9 OMEU6 OMEU7 OMESD DXL UCB CS0R N97 CS0R N8 OMESB OMESB9 OMEU8 DXL UCB NISSAN PATROL MQ M60 Estimated Lift: 0-0mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING BUSH KIT U BOLTS Estimated Lift: 0mm OME Bush Kits must be used to enable springs to be fitted. + + Front Spring Bushes: Early model (round headlight) require OMESB8 and OMESB9. Late model (square headlight) require OMESB and OMESB9. Models with P0 litre engine require CS0FA / B springs. Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side. In these cases fitment of an XL leaf to the right hand side will correct problem. Front U Bolt: DXL suitable for CS00FA / B. OMEU7 fits to left hand side PETROL & DIESEL ENGINES OMEU6 fits to right hand side Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A NAVARA D NP00 0 ON Estimated Lift: 0-0mm SPRING: No Bar STRUT - SPORT SPRING: Bar STRUT -SPORT SPRING: Bar / Winch STRUT -SPORT UPPER STRUT BUSHES STRUT TOP HAT KIT TRIM PACKER Estimated Lift: 0mm SPRING: CONSTANT 00KG SPRING: CONSTANT 00KG SPRING: CONSTANT 600KG FITTING KIT - SWAY BAR / BRAKE Estimated Lift: 0mm SPRING: CONSTANT 00KG SPRING: CONSTANT 600KG GREASABLE SHACKLE KIT SPRING BUSH KIT U BOLTS FITTING KIT - BUMP SPACER EXTRA LEAF TWIN TURBO DIESEL 099 900 00 900 0 900 OME9 OMETH00 FK8 09 606 096 *607 / 606 097 607 098 607 FK8 EL09R 60 EL09R *60 / 60 EL09R 60 OMEGS OMESB OMESB OMEU9A OMEU9B FK8 ELXL NISSAN COIL SPRING 608 900 099 900 00 900 OME9 OMETH00 FK8 LEAF SPRING 6 7 8 SINGLE TURBO DIESEL No top mounting bushes supplied use OME9. OE bushes may be re-used if in good condition. Trim packer FK8 provides approximately 0mm lift at the wheel. Stut Top Hat Kit may be required if original equipment is worn. Sway Bar/Brake Fitting Kit FK8 is required when fitting all OME rear shocks. OMESB suits OE Shackle. OMESB Bush Kit suits OME Greasable Shackle OMEGS. 6 7 8 Use OMEU9A when fitting EL09R. Use OMEU9B when fitting EL09R and EL09R. Fitment of Bump Spacer Kit FK8 is required when fitting all OME rear leaf springs. ELXL will give approximately mm extra lift or increase loading capacity at design height by approximately 00kgs. Page 76 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A NAVARA D0 00 ON (USA - NISSAN IER) Estimated Lift: 0-0mm SPRINGS: TO 0 KGS 607 STRUT - SPORT 9000 SPRINGS: TO 80 KGS 608 STRUT - SPORT 9000 UPPER STRUT BUSHES OME9 STRUT TOP HAT KIT OMETH00 Estimated Lift: 0mm SPRING BUSH KIT SPRING: CONSTANT 00 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS EXTRA LEAF CENTRE BOLT CS0R 6007 N8 OMESB99 OMESB00 CSR *600 / 6007 N8 OMESB99 OMESB00 OMEGS OMEUA DXL UCB9 NISSAN DIESEL & V6 PETROL 608 9000 6 9000 OME9 OMETH00 V6 TURBO DIESEL No top mounting bushes supplied, use OME9. OE bushes may be reused if in good condition. Use: OMESB99 with OE Shackles. OMESB00 when installing OMEGS. Include tray weight in constant load calculation. OE U bolt plate bolt holes may need to be enlarged when fitting OME U bolts. Strut Top Hat Kit may be required if original equipment is worn. Conte Conte NAVARA D 0/00 ON NP00 008 TO 0 TORSION BARS: OVER 0 KGS Estimated Lift: 0mm 0007 600 CS0R 600 SPRING: CONSTANT 00 KGS CS0R 600 N9 SPRING BUSH KIT OMESB9 OMESB0 6 U BOLTS OMEU6 U BOLT THREAD SPACER KIT FK0 GREASABLE SHACKLE KIT OMEGS 6 EXTRA LEAF D8XL CENTRE BOLT UCB Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. Include tray weight in constant load calculation. For constant 00kg loads, add D8XL to CS0R. CS0R has a mm lower cambered nd stage for improved ride quality, however under heavy load this will cause the ride height to be mm lower. FK0 U Bolt Thread Spacer Kit requied on all cab chassis Models. OMESB9 suits OE Shackle. 6 OMESB0 suits OME Greasable Shackle OMEGS. Page 77 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A NAVARA D & D TO 8/00 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS EXTRA LEAF CENTRE BOLT CS00R 600 CS0R 600 N9 OMESB8 OMEU6 D8XL UCB TORSION BARS: OVER 0 KGS 0007 0008 600 STEERING DAMPER OMESD NISSAN Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 0007 suits D & 0008 suits D Models. Important: A minimum of 60mm of droop must be maintained. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. On later Models steering damper was not fitted. Check vehicle to confirm it does have an original steering damper fitted. For constant 00kg loads, add D8XL to CS0R. Include tray weight in constant load calculation. Conte PATHFINDER R 00 TO 0 (NOT USA MANUFACTURED MODEL) Estimated Lift: 0mm SPRING: TO 0 KGS STRUT - SPORT SPRING: TO 00 KGS STRUT - SPORT UPPER STRUT BUSHES STRUT TOP HAT KIT Estimated Lift: 0mm 609 6006 SPRING: CONSTANT 00 KGS 60 6006 DIESEL & V6 PETROL 607 9000 608 9000 OME9 OMETH00 608 9000 6 9000 OME9 OMETH00 V6 TURBO DIESEL A Wheel alignment must be carried out after fitment of OME suspension. No top mounting bushes supplied, use OME9. OE bushes may be reused if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Page 78 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PATHFINDER R0 996 TO 00 V6 MODELS Estimated Lift: mm SPRING: NO ACCESSORIES SPRING: TO 0 KGS SPRING: TO 00 KGS STRUT FITTING KIT Estimated Lift: 0mm 9 9 98 NS + N6S SMP68 9 N6 N0 NISSAN V6 MODEL + N6: Suit Models To /'99. N0: Suit Models from /'99 On. Vehicles with ABS will require ABS Bracket Kit SMP68. N6S Right Hand Side x NS Left Hand Side x No top mounting bushes supplied, reuse OE bushes. Conte PATHFINDER TO LATE 99 TORSION BARS STEERING DAMPER Estimated Lift: 0mm - 600 OMESD 90 *6006 / 600 *N / N89 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. Conte TERRANO II R0 996 TO 00 TORSION BARS Estimated Lift: 0mm PETROL & DIESEL ENGINES - 600 90 6008 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit. Do not modify shock absorber. Page 79 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A XTERRA 00 ON MODELS Estimated Lift: 0mm SPRINGS: TO 0 KGS 607 STRUT - SPORT 9000 SPRINGS: TO 80 KGS 608 STRUT - SPORT 9000 UPPER STRUT BUSHES OME9 STRUT TOP HAT KIT OMETH00 Estimated Lift: 0mm V6 PETROL ENGINE CS06R 6007 N8 SPRING BUSH KIT OMESB99 OMESB00 GREASABLE SHACKLE KIT U BOLTS FITTING KIT EXTRA LEAF OMEGS OMEU7 FK D7XL No top mounting bushes supplied, use OME9. OE bushes may be reused if in good condition. OMESB99 suits factory shackles. OMESB00 suits OMEGS Greasable Shackle Kit. NISSAN FK is a mandatory fitment to space sway bar link away from shock absorber. CS06R with D7XL provides approximately 60mm lift over factory with no additional rear load. CS06R with D7XL provides approximately 0mm lift over factory with constant 00kg additional rear load. Strut Top Hat Kit may be required if original equipment is worn. Page 80 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Co Contents!A Co PETROL V6 (.7) (.) DIESEL (.9) PETROL CYLINDER (.0) Estimated Lift: 0mm SPRING: TO KGS 6 6 STRUT N7S + N8S + N7S + N8S + Estimated Lift: 0mm SSANGYONG MUSSO, SPORT UTILITY & KORANDO 99 TO 00 TORSION BARS - 600 Estimated Lift: 0mm PETROL & DIESEL ENGINES 97 N8 6 OME06 GRAND VITARA 8/00 TO 0 SUZUKI N7S Left Hand Side. N8S Right Hand Side. CoCo GRAND VITARA TO 00 PETROL & 6 CYLINDER ENGINE DIESEL ENGINE Estimated Lift: 0mm SPRING: TO KGS 99 96 STRUT N0S N0S SPRING: 6 TO 7 KGS 96 96 STRUT N0S N0S COIL PACKER OMESJR0 OMESJR0 Estimated Lift: 0mm 96 N0 Coil packer OMESJR0 can be used to increase ride height. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Co VITARA WAGON 988 TO 00 Estimated Lift: - 0mm SPRING: TO KGS STRUT SPRING: 6 TO 7 KGS STRUT Estimated Lift: 0mm SPRING: LIGHT LOAD 9 N0 9 N0 SUZUKI V6 PETROL ENGINE 90 N0S 99 N0S CoCo VITARA WAGON 988 TO 00 Estimated Lift: 0mm SPRING: TO KGS STRUT SPRING: 6 TO 7 KGS STRUT Estimated Lift: 0mm SPRING: LIGHT LOAD CYLINDER PETROL ENGINE 960 N0S 9 N0S 9 N0 9 N0 CoCo VITARA SWB TO 00 Estimated Lift: 0mm SPRING: TO KGS STRUT Estimated Lift: 0mm CYLINDER PETROL ENGINE 9 N0S 9 N Front strut has 0mm longer travel than original equipment. Rear shock has 0mm longer travel than original equipment. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Co XL7 WAGON 00 TO 00 Estimated Lift: mm SPRING: NO ACCESSORIES STRUT BUMP STOP SPACER KIT Estimated Lift: mm 96 N0S FK8 968 N0 SUZUKI PETROL ENGINE 96 N0S FK8 FK8 Bump Stop Spacer Kit is a mandatory fitment with N0S Struts. DIESEL ENGINE CoCo EQUATOR (US MARKET ONLY) Estimated Lift: 0mm SPRINGS: TO 0 KGS 607 STRUT - SPORT 9000 SPRINGS: TO 80 KGS 608 STRUT - SPORT 9000 UPPER STRUT BUSHES OME9 STRUT TOP HAT KIT OMETH00 Estimated Lift: 0mm SPRING BUSH KIT SPRING: CONSTANT 00 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT U BOLTS Use: DIESEL & V6 PETROL CS0R 6007 N8 OMESB99 OMESB00 CSR 6007 N8 OMESB99 OMESB00 OMEGS OMEUA OMESB99 with OE Shackles. OMESB00 when installing OMEGS. OE plastic stone shield must be refitted. No top mounting bushes supplied, use OME9. OE bushes may be re-used if in good condition. OE U Bolt plate bolt holes may need to be enlarged when fitting OME U Bolts. Strut Top Hat Kit may be required if original equipment is worn. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Co SIERRA / SAMURAI ALL LEAF SPRING MODELS (SJ) STD TRACK : 98-988 WIDE TRACK : 988-996 SJ0 - SWB SJ70 - SWB (also fits MG0) SJ - LWB SJ7 - LWB (also fits MG0WT) Note: MG0 & MG0WT are Indian built LWB Models. Estimated Lift: 0mm SPRING: TO KGS SPRING: 6 TO 7 KGS SPRING BUSH U BOLTS FITTING KIT TRIM PACKER STEERING DAMPER EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS TRIM PACKER EXTRA LEAF CENTRE BOLT 6 88 To '96 00cc Wide Track Models: Front: D/S OMEU6 x, OMEU6B x Rear: OMEU60 x 8 To '88 00cc STD Track Models: Front: D/S OMEU6 x, OMEU6B x Rear: OMEU6 x 8 To '87 000cc Models: Front: D/S OMEU6 x, OMEU6B x Rear: OMEU60 x D0XL is suitable for CS0FA / B. CS0FA / B OME0 CS0FA / B OME0 OMESB9 OMESB Required FK06 TP0 OMESD0 D0XL UCB7 CS08R OME0 N CS09R OME0 N OMESB9 OMESB Required TP0 DXL UCB7 SUZUKI.0 LITRE + CS0FA / B + OME0 + CS0FA / B + OME0 OMESB9 OMESB Required FK06 TP0 OMESD0 D0XL UCB7 P/S OMEU60 x P/S OMEU60 x OMESB9 Bush Kit fits all Models except LJ0. OMESB Bush Kit only fits Model LJ0. OME0 fits all Models except LJ80 and LJ80 II. N fits all LJ80 and LJ80 II Models. FK06 kit required for Model with OE stabiliser bar. Refer OME Technical & Fitting Manual.. LITRE IMPORTANT: Sierras used in extreme heavy off road conditions eg., station mustering, must have CS0FA + B installed. P/S OMEU6 x 6 6 Page 8 OME INT CAT. NO.8 SEPTEMBER 08

CoContents!A CoCo Estimated Lift: 0-0mm SPRING: TO KGS - 0mm CS0FA / B + CS0FA / B + OME0 OME0 SPRING: 6 TO 7 KGS CS0FA / B + CS0FA / B + XL LEAF D0XL D0XL OME0 OME0 SPRING BUSH OMESB9 OMESB9 OE OE U BOLTS OMEU60 OMEU6 + OMEU60 OMEU6 LHS RHS LHS RHS CENTRE BOLT UCB7 UCB7 STEERING DAMPER OMESD0 OMESD0 TRIM PACKER TP0 TP0 Estimated Lift: 0mm CS08R CS09R OME0 OME0 SPRING: CONSTANT 00KGS CS09R CS09R XL LEAF - DXL OME0 OME0 SPRING BUSH KIT OMESB9 OMESB9 U BOLTS OE OE OMEU60 OMEU60 CENTRE BOLT - UCB7 TRIM PACKER TP0 TP0 JIMNY SN Estimated Lift: 0mm. LITRE PETROL SUZUKI SANTANA SAMURAI TO 00 SWB & LWB MODELS SWB MODEL Front: LHS: OMEU60 x, RHS: OMEU6B x required when fitting CS0FA/B Rear: OMEU60 x required when fitting CS09R OMESD0 can be fitted to Models which have an OE steering damper. CYLINDER PETROL ENGINE 96 OME08 969 OME08.9 LITRE DIESEL LWB MODEL Fitment of XL Leaf D0XL is recommended for weight in excess of 6kg on diesel Model and 7kg on petrol Model. Fitment of XL leaf DXL is recommended for LWB Models with constant 00kg rear weight or OE hard top. SPRING: TO KGS 96 OME08 SPRING: 6 TO 8 KGS 96 OME08 Estimated Lift: 0mm SPRING: TRIM PACKER 966 967 OME09 OMESJR0 DIESEL ENGINE If uncertain, compare original coil heights. 966 suits right hand drive Models with a 0mm higher right hand side coil. 967 suits left hand drive Models with equal height coils. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Cont TOYOTA LANDCRUISER 00 SERIES WAGON* ** DOES NOT SUIT AHC MODELS ** ALL V8 DIESEL ENGINES V8 PETROL ENGINE Estimated Lift: As Below SPRING: NO WEIGHT: mm LIFT 700 70 STRUT - SPORT 9007 9007 STRUT N08S N08S SPRING: 00 KGS: mm LIFT 70 70 STRUT - SPORT 900 900 STRUT N08S N08S SPRING: NO WEIGHT: 0mm LIFT 70 700 STRUT - SPORT 9007 9007 STRUT N08S N08S SPRING: 00 KGS: 0mm LIFT 70 70 STRUT - SPORT 900 900 STRUT N08S N08S UPPER STRUT BUSHES OME OME COIL PACKER OME9PF OME9PF STRUT TOP HAT KIT OMETH00 6 OMETH00 6 BP- SELECTION - COIL OVER LC00 LH BP9000L SELECTION HINTS: COIL OVER LC00 RH BP9000R BP KIT LC00 VM800000 *For Fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension System) fitted, please refer to OME's Fitting Hints & Tips (OME Bulletin 70 Estimated Lift: As Below LC00 KDSS Fitting Hints). : LESS 0mm 70 609 N09 : NO LIFT 7 609 N09 : 0mm LIFT 7 609 N09 SPRING: CONSTANT 00 KGS: 0mm 7 600 SPRING: CONSTANT 00 KGS: 0mm 7 600 SPRING: CONSTANT 600 KGS: 0mm 7 600 TRIM PACKER OME80PR0 OME80PR0 STONE GUARD KIT OME66 SWAY BAR UPGRADE (mm) OMESTAB BP- SELECTION SHOCK LC00 BP6006 BP KIT LC00 VM800000 BP KIT LC00 KDSS VM800000 ARMOURED APPLICATION.T is available refer to page 0 for details 6 OME coils and strut can only be installed together due to different winding of the lower coil end to suit the OME coil seat. They are not compatible with the OE Coil Seat. Due to the nature of the KDSS, Models fitted with KDSS may experience a characteristic 0mm to mm lean to the front right hand side. No top mounting bushes supplied use OME. OE bushes may be re-used if in good condition. To maintain ride height when front accessory weight exceeds 00kgs, OME9PF coil packer should be installed, each OME9PF will increase ride height by 0mm. OME66 Lower Shock Stone Guards are recommended fitment for protection against stone damage. Not suitable for KDSS Models. Strut Top Hat Kit may be required if original equipment is worn. Page 86 OME INT CAT. NO.8 SEPTEMBER 08

Cont LANDCRUISER 00 SERIES INDEPENDENT SUSPENSION ** DOES NOT SUIT AHC MODELS ** TORSION BARS: OVER 7 KGS 000 000 *6000 / 60000 N FITTING KIT FK7 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS TRIM PACKER STONE GUARD KIT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS N0 86 *6000 / 6000 N0 86 6000 866 86 6000 N0 OME80PR0 OME80PR0 OME66 OME66 0/000 ON 860 6000 TRIM PACKER STONE GUARD KIT TOYOTA PETROL & DIESEL ENGINES 0/98 TO 000 V8 MODELS 86 6000 N0 866 *6000 / 6000 N0 OME80PR0 OME80PR0 OME66 OME66 Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock absorbers. 000 suits V8 Models. 000 suits Turbo Diesel Models. NB: In some Middle Eastern Countries, 6 Cylinder Petrol LandCruiser 00 Series (IFS) use the longer turbo diesel torsion bars. Packers must be installed on top of coils. SPORT/ FITMENT: OME66 or OME66 (suits 0mm diameter control arms). Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road Original rear rake is 60mm approximately with OE coil rates of lbs/in or.n/mm. Customers wishing to lower the rear height but increase the load carrying ability can select from: 866 - Reduces OE height by 0mm (rates 0-00lbs/in, -.N/mm) 86 - Reduces OE height by 0mm (rates 0lbs/in, N/mm) Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment of a FK7 Lower Control Arm Reinforcing Bracket Kit is strongly recommended. Page 87 OME INT CAT. NO.8 SEPTEMBER 08

Cont Estimated Lift: 0-0mm SPRING: TO 0 KGS - 0mm SPRING: TO 0 KG - 0mm SPRING: TO 0 KGS - 0mm TRIM PACKER STEERING DAMPER CASTER KIT Estimated Lift: 0-0mm 860 6000 N7E SPRING: CONSTANT 00 KGS 86 6000 N7E SPRING: CONSTANT 00 KGS 86 6007 N7E SPRING: CONSTANT 600 KGS 868 6007 N7E SPRING: MEDIUM 0mm LIFT 86 6000 N7E TRIM PACKER OME80PR0 OME80PR0 STONE GUARD KIT OME66 OME66 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS TRIM PACKER STONE GUARD KIT TOYOTA LANDCRUISER 0 SERIES & 80 SERIES WAGONS LIVE AXLE SUSPENSION MODELS PETROL & DIESEL ENGINES 8 6008 N7 80 *60070 / 6008 N7 86 60070 N7 OME80PF0 OME80PF0 OMESD OMECA77B 860 6000 N7E 86 6000 N7E OME80PR0 OME80PR0 OME66 OME66 LPG CONVERSION PETROL & DIESEL ENGINES BP- SELECTION - Lift To 0mm BP600 VM80000 BP KIT BP- SELECTION - Lift To 0mm & LPG BP600 VM800006 BP KIT OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. Packers must be installed on the top of coil springs. OME66 or OME66 Lower Shock Mount Stone Guard is recommended fitment to protect against severe stone pepppering encountered on loose road surfaces. OME66 will only fit Models with mm diameter control arms. Page 88 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A OFF ROAD USE ONLY - TOYOTA LANDCRUISER 80 & 0 SERIES PART NUMBER PRICE COILS 7mm LIFT - SPRING TO 0KG 8 00 lbf/in 7mm LIFT - SPRING TO 0KG 00mm LIFT - SPRING TO 0KG 00mm LIFT - SPRING TO 0KG mm LIFT - SPRING TO 0KG 09 9 0 0 0 lbf/in 00 lbf/in 0 lbf/in 00 lbf/in SHOCKS 6008L 60070L BP- SELECTION SHOCK: LC80/0 LONG BP600 BP KIT: LC80/0 VM80000 STEERING DAMPER STABILISER OMESD COMPONENTS ADJUSTABLE PANHARD ROD PANR007 RHD only PAN00 LHD only COIL SPRING TRIM PACKER OME80PF0 mm COIL SPRING TRIM PACKER OME80PF0 0mm Notification: Modifications for off - road use only COMMENTS Suits 7mm &00mm coils Suits 7mm &00mm coils Suits 7mm & 00mm coils PART NUMBER PRICE COMMENTS COILS 7mm LIFT - MEDIUM 80 lbf/in 7mm LIFT - CONSTANT 00KG 7mm LIFT - CONSTANT 00KG 00mm LIFT - MEDIUM 00 09 0 lbf/in 0 lbf/in 80 lbf/in 00mm LIFT - CONSTANT 00KG 00mm LIFT - CONSTANT 00KG 0 0 0 lbf/in 0 lbf/in mm LIFT - MEDIUM 80 lbf/in SHOCKS 6000L Suit 7mm & 00mm coils 6007L Suit 7mm & 00mm coils BP- SELECTION SHOCK: LC80/0 LONG BP600 Suits 7mm & 00mm Coils BP KIT: LC80/0 VM800006 COMPONENTS ADJUSTABLE PANHARD ROD PANR008 RHD & LHD HEAVY DUTY LOWER TRAILING ARMS LTA0 Standard Length ADJUSTABLE UPPER TRAILING ARMS UTA06 0mm on car adjustable TRIM PACKER OME80PR0 mm, MUST be installed top of coil OME80PR0 0mm, MUST be installed top of coil The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer. Modifications and replacement of other associated components will be required. Lift increase is approximate and will depend on vehicle weights. Warranty Implications The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent any future misunderstanding. Page 89 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm SPRING: NO BAR 88 869 STRUT - SPORT 9000 9000 SPRING: BAR ONLY 869 88 STRUT - SPORT 9000 9000 SPRING: BAR AND WINCH 88 88 STRUT - SPORT 9000 9000 TRIM PACKER OME9PF OME9PF UPPER STRUT BUSHES OME OME STRUT TOP HAT KIT OMETH00 OMETH00 Estimated Lift: 0mm SPRING: NO BAR 88 88 STRUT - SPORT 9000 9000 SPRING: BAR ONLY 88 887 STRUT - SPORT 9000 9000 SPRING: BAR AND WINCH 887 888 STRUT - SPORT 9000 9000 TRIM PACKER OME9PF OME9PF UPPER STRUT BUSHES OME OME STRUT TOP HAT KIT OMETH00 OMETH00 BP- SELECTION Estimated Lift: 0-0mm NON KDSS MODELS KDSS MODELS BP- COIL OVER LH BP9000L BP9000L BP- COIL OVER RH BP9000R BP9000R BP- FIT KIT VM8000008 VM8000009 Estimated Lift: 0mm 89E 60080 SPRING: CONSTANT 00 KGS 89 *6008 / 60080 SPRING: CONSTANT 00 KGS 896 6008 TRIM PACKER OME0PR0 STONE GUARD KIT OME66 Estimated Lift: 0mm V6.0L PETROL ENGINE TOYOTA PRADO 0 SERIES 0/07 ON LWB COIL SPRUNG MODELS ONLY V6.0L PETROL ENGINE LWB MODELS LWB MODELS SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS TRIM PACKER 889 60080 898 *6008 / 60080 899 6008 OME0PR0 STONE GUARD KIT OME66 BP- SELECTION - Estimated Lift: 0-0mm BP- SHOCK BP- FIT KIT BP600 VM800000.8L &.0L DIESEL ENGINE.8L &.0L DIESEL ENGINE Vehicles with KDSS, must have x OME9PF packer installed on the front right hand side to maintain correct trim. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. OME66 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. For Fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension System) fitted, please refer to OME's Fitting Hints & Tips (OME Bulletin 70 LC00 KDSS Fitting Hints). Strut Top Hat Kit may be required if original equipment is worn. Page 90 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TOYOTA PRADO 0 SERIES TO 09/07 LWB COIL SPRUNG MODELS ONLY V6.0L PETROL ENGINE.8L &.0L DIESEL ENGINE Estimated Lift: 0mm SPRING: NO BAR 88 88 STRUT - SPORT 9000 9000 SPRING: BAR ONLY 88 869 STRUT - SPORT 9000 9000 SPRING: BAR AND WINCH 869 88 STRUT - SPORT 9000 9000 TRIM PACKER OME9PF OME9PF UPPER STRUT BUSHES OME OME STRUT TOP HAT KIT OMETH00 6 OMETH00 6 V6.0L PETROL ENGINE.8L &.0L DIESEL ENGINE Estimated Lift: 0mm SPRING: NO BAR 869 88 STRUT - SPORT 9000 9000 SPRING: BAR ONLY 88 88 STRUT - SPORT 9000 9000 SPRING: BAR AND WINCH 88 887 STRUT - SPORT 9000 9000 TRIM PACKER OME9PF OME9PF UPPER STRUT BUSHES OME OME STRUT TOP HAT KIT OMETH00 6 OMETH00 6 BP- SELECTION Estimated Lift: 0-0mm NON KDSS MODELS KDSS MODELS BP- COIL OVER LH BP9000L BP9000L BP- COIL OVER RH BP9000R BP9000R BP- FIT KIT VM8000008 VM8000009 Estimated Lift: 0mm LWB MODELS Vehicles with KDSS, must have x OME9PF packer installed on the front right hand side to maintain correct trim. 89E SPRING: CONSTANT 00 KGS 60080 89 *6008 / 60080 No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. SPRING: CONSTANT 00 KGS 896 OME66 Lower Shock Mount Stone 6008 Guard is recommended fitment to rear shocks to protect against severe stone TRIM PACKER OME0PR0 peppering encountered on loose road STONE GUARD KIT OME66 surfaces. LWB MODELS For Fitment to Models with Toyota's KDSS (Kinetic Dynamic Suspension Estimated Lift: 0mm System) fitted, please refer to OME's Fitting Hints & Tips (OME Bulletin 70 LC00 KDSS Fitting Hints). 889 SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS TRIM PACKER 60080 898 *6008 / 60080 899 6008 OME0PR0 6 When 88 fitted to Petrol Model ride height increase will be approximately 0mm. Strut Top Hat Kit may be required if original equipment is worn. STONE GUARD KIT OME66 BP- SELECTION - Estimated Lift: 0-0mm BP- SHOCK BP- FIT KIT BP600 VM800000 Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm SPRING: NO BAR 88 869 STRUT - SPORT 9006 9006 SPRING: BAR ONLY 869 88 STRUT - SPORT *9000 / 9006 *9000 / 9006 SPRING: BAR AND WINCH 88 88 STRUT - SPORT 9000 9000 TRIM PACKER OME9PF OME9PF UPPER STRUT BUSHES OME OME STRUT TOP HAT KIT OMETH00 OMETH00 Estimated Lift: 0mm 89E 60086 SPRING: CONSTANT 00 KGS 89 *60080 / 60086 SPRING: CONSTANT 00 KGS 896 60080 TRIM PACKER OME0PR0 STONE GUARD KIT OME66 V6.0L PETROL ENGINE WAGON MODELS TOYOTA PRADO 0 SERIES SWB 009 ON COIL SPRUNG MODELS ONLY Vehicles with KDSS, must have x OME9PF packer installed on the front right hand side to maintain correct trim. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition..0l DIESEL ENGINE OME66 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Strut Top Hat Kit may be required if original equipment is worn. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PRADO 0 SERIES /00 TO 009 LWB & SWB Estimated Lift: mm SPRING: TO 0 KGS STRUT - SPORT STRUT SPRING: TO 00 KGS STRUT - SPORT STRUT SPRING: 0 TO 0 KGS STRUT - SPORT STRUT TRIM PACKER UPPER STRUT BUSHES STRUT TOP HAT KIT BP- SELECTION BP- COIL OVER PRADO LH BP- COIL OVER PRADO RH BP- FIT KIT PRADO 0 SPRING: 0 KGS - 00 KGS SPRING: CONSTANT 00 KGS STONE GUARD KIT BP- SELECTION BP- SHOCK PRADO BP- FIT KIT PRADO Estimated Lift: 0mm SPRING: 0KGS - 0KGS SPRING: CONSTANT 00 KGS STONE GUARD KIT BP- SELECTION BP- SHOCK PRADO BP- FIT KIT PRADO 88 *90000 / 900 N0S 88 90000 *N0S / N0S 88 90000 N0S OME9PF OME OMETH00 BP9000L BP9000R VM800009 89E 89 *6000 / 60 N 896 *6000 / 6000 N0 897 6000 N0 OME66 BP600 VM800000 89E *6000 / 60 N 89 *6000 / 6000 N0 896 6000 N0 OME66 BP600 VM800000 TOYOTA EXCEPT TEMS MODEL (ELECTRONICALLY MODULATED SUSPENSION) Estimated Lift: 0mm PETROL & DIESEL ENGINES LWB MODEL SWB MODEL 6 6 To maintain front strut droop it is important front coils are selected as shown. OME66 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. 89E suits LWB Models without OE nd fuel tank. 89 suits LWB Models with OE nd fuel tank. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. When remaining stock of N0S and N0 is exhausted no further product will be available. Strut Top Hat Kit may be required if original equipment is worn. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PRADO 90 SERIES TO 0/00 LWB Estimated Lift: 0mm SPRING: TO 0 KGS STRUT - SPORT SPRING: TO 0 KGS STRUT - SPORT TRIM PACKER Estimated Lift: 0mm SPRING: CONSTANT 0 KGS SPRING: CONSTANT 00 KGS TRIM PACKER STONE GUARD KIT 880 9000 88 9000 OME9PF 890 6008 N86 89 *6007 / 6008 N86 89 6007 N86 OME80PF0 OME80PF0 OME66 TOYOTA V6 PETROL ENGINE 88 9000 88 9000 OME9PF DIESEL ENGINE To maintain front strut droop it is important front coils are selected as shown. OME66 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Cont TUNDRA 007 ON Estimated Lift: 60mm SPRING: NO BAR STRUT SPORT STRUT SPRING: BAR ONLY STRUT SPORT STRUT SPRING: BAR & WINCH STRUT SPORT STRUT BP- SELECTION BP- COIL OVER TUNDRA LH BP- COIL OVER TUNDRA RH BP- FIT KIT TUNDRA Estimated Lift: 60mm BP- SELECTION BP- SHOCK TUNDRA LH BP- SHOCK TUNDRA RH BP- FIT KIT TUNDRA XL LEAF SPRING BUSH KIT U BOLTS FITTING KIT GREASABLE SHACKLE KIT 6 9008 N9S 6 9008 N9S 6 9008 N9S BP9000L BP9000R VM80000 CS0R 6000 N9 BP6000L BP6000R VM80000 D8XL OMESB06 OMEUB FK OMEGS TOYOTA No top mounting bushes supplied, reuse OE bushes. Models with rear sway bar will require end link modifications to retain sway bar in operation. FK Brake Line and ABS Wire Bracket Relocation Kit is a mandatory fitment. Please note CS0R is supplied with bushes installed. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A FJ CRUISER 00 ON Estimated Lift: 0mm SPRING: NO ACCESSORIES SPRING: TO 60 KGS SPRING: 60 TO 0 KGS BP- SELECTION BP- COIL OVER LH BP- COIL OVER RH BP- FIT KIT TRIM PACKER UPPER STRUT BUSHES STRUT TOP HAT KIT Estimated Lift: 0mm 88 *9000 / 9006 88 9000 88 9000 BP9000L BP9000R VM8000008 OME9PF OME OMETH00 SPRING: LIGHT LOAD 89E *60080 / 60086 89 *6008 / 60080 SPRING: CONSTANT 00 KGS 896 6008 STONE GUARD KIT OME66 BP- SELECTION BP- SHOCK BP600 BP- FIT KIT VM800000 TOYOTA No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. OME66 lower shock mount guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Strut Top Hat Kit may be required if original equipment is worn. Page 96 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Cont FJ CRUISER 006 TO 00 Estimated Lift: 0mm SPRING: NO ACCESSORIES STRUT - SPORT STRUT SPRING: TO 60 KGS STRUT - SPORT STRUT SPRING: 60 TO 0 KGS STRUT - SPORT STRUT TRIM PACKER UPPER STRUT BUSHES STRUT TOP HAT KIT Estimated Lift: 0mm SPRING: LIGHT LOAD SPRING: CONSTANT 00 KGS STONE GUARD KIT FORTUNER 0 ON Estimated Lift: mm SPRING: NO BAR 869 STRUT - SPORT 9008 SPRING: BAR ONLY 88 STRUT - SPORT 9008 SPRING: BAR & WINCH 88 STRUT - SPORT 9009 SPRING: BAR, WINCH & ACCESSORIES 887 STRUT - SPORT 9009 TRIM PACKER OME9PF UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 Estimated Lift: mm 88 *90000 / 900 N0S 88 90000 N0S 88 90000 N0S OME9PF OME OMETH00 89E *6000 / 60 N 89 *6000 / 60 N 896 6008 OME66 80 60 SPRING: CONSTANT 00 KGS 80 60 DRIVESHAFT SPACER FK9 TOYOTA DIESEL ENGINE No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. OME66 lower shock mount guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Strut Top Hat Kit may be required if original equipment is worn. To maintain coil clearance from the sway Bar, the coil seat must be installed with the helix facing away from the sway bar. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Strut Top Hat Kit may be required if original equipment is worn. FK9 Rear Driveshaft Spacer is a mandatory fitment. Page 97 OME INT CAT. NO.8 SEPTEMBER 08

Cont FORTUNER 00 TO 0 Estimated Lift: 0mm SPRING: TO 7 KGS 88 STRUT - SPORT *9000 / 900 STRUT *N67S / N66S SPRING: 76 TO 0 KGS 88 STRUT - SPORT *9000 / 900 STRUT N67S TRIM PACKER OME9PF UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS 80 60078 N9 80 60077 N9 TOYOTA No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Page 98 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LANDCRUISER 70 SERIES DUAL CAB PETROL & DIESEL 6 CYLINDER ENGINES V8 DIESEL ENGINE Estimated Lift: 0mm SPRING: TO 0 KGS 86 6 9 89 6 9 60008 60008 N8 0 N8 0 SPRING: TO 0 KGS 89 6 9 8 6 9 60008 60008 N8 0 N8 0 STEERING DAMPER OMESD OMESD7 CASTER KIT OMECA77B OMECA77B SWAY BAR SPACER KIT FK9 FK9 TRIM PACKER OME79PF0 OME79PF0 UPGRADED SWAY BAR NOT APPLICABLE - OMESTAB ABS WIRE BRACKET KIT FK6 9 FK6 9 BP- SELECTION BP- SHOCK BP60009 Should the front drive shaft contact the sway bar when the suspension is at full BP- FIT KIT VM8000006 droop, use FK9 Spacer Kit to pack the 70 SERIES DUAL CAB sway bar down. Estimated Lift: All Models: mm EL079R 8 6000 SPRING: CONSTANT 00 KGS EL080R 8 600 SPRING: CONSTANT 00 KGS EL08R 8 600 SPRING: CONSTANT 700 KGS EL08R 7 8 6009 BP- SELECTION BP- SHOCK BP6008 BP- SHOCK LONG 68 (Suits BP6009 EL08R Only) BP- FIT KIT VM8000007 SPRING BUSH KIT OMESB0 OMESB8 GREASABLE SHACKLE KIT OMEGS0 GREASABLE SHACKLE FIXED END PIN KIT OMEGP7 U BOLTS OMEU9B OMEU9C SWAY BAR OMESTAB9 7 SWAY BAR FIT KIT FK77 FK76 7 BRAKE PROPORTIONING KIT FK FK8 8 BRAKE LINE DROP 0 TO 08/6 FK8 EXTRA LEAF ELXL OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. OMESB0: Use on original shackles and pins. OMESB8: Use for all Models when installing OME greasable shackles and pins OMESD7 suits 007 On Models (open length 70mm). TOYOTA 6 7 8 9 0 Include tray weight in constant load calculation. For heavily loaded applications it may be necessary to step down one spring selection in the front to maintain correct rake. OMESTAB9 Sway Bar is highly recommended fitment when 700kg Constant Spring is used. Sway Bar can also be fitted to lighter rated springs to improve road handling. FK76 suits Models with OE axle sway bar mount. FK77 suits Models without OE sway bar provision. FK and FK8 suit vehicles prior to August 06 production. FK is Brake Proportioning Valve Kit for medium load and 00kg spring. FK8 is for 00kg and 700kg spring. Due to variance in tray clearance on 70 Series Dual Cab please check vehicle before selecting Fit Kit. Not required for BP- fitment. For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted. FK6 suits vehicles prior to August 06 production. For vehicles post August 06 production refer to PIB No.. When remaining stock of N8 is exhausted no further product will be available. Required to be fitted to vehicles from 0/ to 08/6. Use OMEU9C if fitting Extra Leaf to EL08R. Excludes GR-FE Models. Page 99 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm SPRING: TO 60 KGS SPRING: 6 TO 0 KGS STEERING DAMPER CASTER KIT SWAY BAR SPACER KIT UPGRADED SWAY BAR ABS WIRE BRACKET KIT BP- SELECTION SHOCK LC 76 BP KIT LC 76 86 60008 89 60008 N8 OMESD7 OMECA77B FK9 OMESTAB FK6 BP60009 VM8000006 TOYOTA LANDCRUISER 76 SERIES WAGON Estimated Lift: 0mm V8 DIESEL ENGINE SPRING: MEDIUM CS07R 6000 SPRING: CONSTANT 00 KGS CS08R 7 *60 / 600 SPRING: CONSTANT 800 KGS CS070R 6 7 0 60 SPRING BUSH KIT OMESB86 OMESB8 GREASABLE SHACKLE KIT OMEGS9 GREASABLE SHACKLE FIXED END PIN KIT OMEGP7 ANTI-INVERSION KIT FK8 U BOLTS OMEU9B 0 OMEU9D CENTRE BOLT UCB7 STONE GUARD KIT EXTRA LEAF OME66 DXL SWAY BAR OMESTAB9 6 SWAY BAR FIT KIT FK77 FK76 6 BRAKE PROPORTIONING BRACKET FK FK8 7 BRAKE LINE DROP 0 TO 08/6 FK8 BP- SELECTION SHOCK LC 76 BP KIT LC 76 BP6008 VM8000007 8 9 8 9 8 6 7 8 9 0 OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if required. Be sure to select OME Bush Kits OMESB8: Use for all Models when installing OME greasable shackles and pins. OMESB86: Use when original shackles and pins are used. To prevent springs from inverting it is mandatory that either OMEGS9 Greasable Shackle Kit or FK8 Anti- Inversion Kit be installed. Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK9 Spacer Kit to pack the sway bar down. OME66 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. FK76 suits Models with OE sway bar mount. FK77 suits Models without sway bar provision. OMESTAB9 Sway Bar is highly recommended when 800kg constant spring is used. FK and FK8 suit vehicles prior to August 06 production. FK is Brake Proportioning Kit for 00kg spring. FK8 is for the 800kg spring. Not required for BP- fitment. For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted. FK6 suits vehicles prior to August 06 production. For vehicles post August 06 production refer to PIB No.. For heavily loaded applications it may be necessary to step down one spring selection in the front to maintain correct rake. Use OMEU9B when fitting CS070R springs. When remaining stock of N8 is exhausted no further product will be available. Required to be fitted to vehicles from 0/ To 08/6. Page 00 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LANDCRUISER 78 SERIES Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS STEERING DAMPER CASTER KIT SWAY BAR SPACER KIT TRIM PACKER UPGRADED SWAY BAR ABS WIRE BRACKET KIT BP- SELECTION - SHOCK LC 78 BP KIT LC 78 Estimated Lift: All Models: mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING: CONSTANT 800 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT U BOLTS SWAY BAR SWAY BAR FIT KIT SWAY BAR EXTENSION BRACKET KIT BRAKE PROPORTIONING KIT EXTRA LEAF BRAKE LINE DROP REQUIRED ON MODELS 0/ TO 08/6 BP- SELECTION SHOCK LC 78 SHOCK LC 78 LONG 68 (Suits EL08R Only) BP KIT LC 78 PETROL & DIESEL 6 CYLINDER ENGINES V8 DIESEL ENGINE 86 6 9 89 6 9 60008 60008 N8 0 N8 0 89 6 9 8 6 9 60008 60008 N8 0 N8 0 OMESD OMESD7 OMESD7 OMECA77B OMECA77B FK9 FK9 OME79PF0 OME79PF0 NOT APPLICABLE - OMESTAB FK6 9 FK6 9 BP60009 VM8000006 78 SERIES TROOP CARRIER EL079R 6000 EL080R 600 EL08R 600 EL08R 6009 OMESB86 OMESB8 OMEGS9 OMEGP7 OMEU9B OMEU9C OMESTAB9 FK77 FK76 FK FK FK8 ELXL BP6008 BP6009 VM8000007 TOYOTA OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. OMESB8: Use for all Models when installing OME greasable shackles and pins. OMESB86: Use for Troop Carrier Models when original shackles and pins are used. 7 8 FK8 8 8 8 7 7 8 6 7 8 9 0 FK Sway Bar Extension Bracket Kit must be installed to prevent damage to sway bar mounts, due to increased suspension travel. FK not needed if fitting OMESTAB9. Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK9 Spacer Kit to pack the sway bar down. OMESD suits pre 007 Models (open length 6mm). OMESD7 suits 007 On Models (open length 70mm). For heavily loaded applications it may be necessary to step down one spring selection in the front to maintain correct rake. OMESTAB9 Sway Bar is highly recommended fitment when 800kg Constant Spring is used. Sway Bar can also be fitted to lighter rated springs to improve road handling. FK76 suits Models with OE axle sway bar mount. FK77 suits Models without OE sway bar provision. FK and FK8 suit vehicles prior to August 06 production. FK is Brake Proportioning Valve Kit for 00kg and 00kg spring. FK8 is for 600kg and 800kg spring. Not required for BP- fitment. For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted. FK6 suits vehicles prior to August 06 production. For vehicles post August 06 production refer to PIB No.. When remaining stock of N8 is exhausted no further product will be available. Use OMEU9C if fitting Extra Leaf to EL08R. Excludes GR-FE Models. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A PETROL & DIESEL 6 CYLINDER ENGINES V8 DIESEL ENGINE Estimated Lift: 0mm SPRING: TO 0 KGS 86 6 9 89 6 9 60008 60008 N8 N8 SPRING: TO 0 KGS 89 6 9 8 6 9 60008 60008 N8 N8 OMESD STEERING DAMPER OMESD7 OMESD7 CASTER KIT OMECA77B OMECA77B SWAY BAR SPACER KIT FK9 FK9 TRIM PACKER OME79PF0 OME79PF0 UPGRADED SWAY BAR NOT APPLICABLE - OMESTAB ABS WIRE BRACKET KIT FK6 9 FK6 9 BP- SELECTION - SHOCK LC 79 BP KIT LC 79 Estimated Lift: All Models: mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING: CONSTANT 800 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT U BOLTS SWAY BAR BRAKE PROPORTIONING KIT BRAKE LINE DROP 0 TO 08/6 EXTRA LEAF BP- SELECTION SHOCK LC 79 SHOCK LC 79 LONG 68 (Suits EL08R Only) BP KIT LC 79 BP60009 VM8000006 EL079R 6000 EL080R 600 EL08R 600 EL08R 6009 OMESB0 OMESB8 OMESB8 OMEGS0 OMEGP7 OMEU9B OMEU9C OMESTAB9 FK77 FK76 FK FK8 FK8 ELXL BP6009 VM8000007 OMECA77B Caster Kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. 79 SERIES SINGLE CAB TOYOTA LANDCRUISER 79 SERIES SINGLE CAB (Excludes GR-FE Models) SWAY BAR FIT KIT BP6008 OMESB0: Use on original shackles and pins for 79 Series Models from 07/009 On. OMESB8: Use on original shackles and pins for 79 Series Models To 06/009. OMESB8: Use for all Models when installing OME greasable shackles and pins. 8 8 8 7 8 7 7 7 8 0 6 7 8 9 0 OMESD suits pre 007 Models (open length 6mm). OMESD7 suits 007On Models (open length 70mm). Should the front drive shaft contact the sway bar when the suspension is at full droop, use FK9 Spacer Kit to pack the sway bar down. Include tray weight in constant load calculation. For heavily loaded applications it may be necessary to step down one spring selection in the front to maintain correct rake. OMESTAB9 Sway Bar is highly recommended fitment when 800kg Constant Spring is used. Sway Bar can also be fitted to lighter rated springs to improve road handling. FK76 suits Models with OE axle sway bar mount. FK77 suits Models without OE sway bar provision. FK and FK8 suit vehicles prior to August 06 production. FK is Brake Proportioning Valve Kit for 00kg and 00kg spring. FK8 is for 600kg and 800kg spring. Due to variance in tray clearance on 79 Series please check vehicle before selecting Fit Kit. Not required for BP- fitment. For vehicles fitted with ABS brakes, an ABS Wire Bracket Kit must be fitted. FK6 suits vehicles prior to August 06 production. For vehicles post August 06 production refer to PIB No.. Required to be fitted to vehicles from 0/ To 08/6. When remaining stock of N8 is exhausted no further product will be available. Use OMEU9C if fitting Extra Leaf to EL08R. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LANDCRUISER 7 SERIES 7 Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT PETROL ENGINE CS006F 60009 N9 CS006F 6006 OMEU OMESB OMEGS OMEGP OMESD FK08 D6XL UCB CS006R 6000 CS007R 600 CS008R 600 OMESB6 OMEU9B OMEGS OMEGP OMEGP FK08 DXL UCB TOYOTA CS006F 60009 N9 CS007F 6006 OMEU OMESB OMEGS OMEGP OMESD FK08 D6XL UCB DIESEL ENGINE 6 6 Vehicles with no front accessory weight will require the removal of the th leaf from the top of the spring stack. This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 00mm. 6 7 Shackles: FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. Note: Spring Caster Wedge OMECW ( o Caster Wedges) may be required to restore positive caster angle. Front end alignment check will indicate required adjustment. There can be spigot sizes in the rear fixed end pins on 7 Series LandCruisers. Check for correct size before ordering greasable pins. Part numbers are: 0mm spigot = OMEGP. mm spigot = OMEGP. Include tray weight in constant load calculation. D6XL is suitable for CS006F. When remaining stock of N9 is exhausted no further product will be available. Excludes GR-FE Models. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Cont SPRING: TO 0 KGS SPRING: TO 0 KGS STEERING DAMPER CASTER KIT Estimated Lift: 60mm SPRING: CONSTANT 0 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT EXTRA LEAF CENTRE BOLT DIESEL. ENGINES 86 60008 89 60008 OMESD OMECA77B CS07RB 600 CS00RB 600 OMESB9 OMEU9A OMEGS0 OMEGP7 DXL UCB TOYOTA LANDCRUISER HZJ7 & HZJ7 SWB & MWB MODELS TO 007 Estimated Lift: 0mm OMECA77B caster kit will increase caster angle by o. Check manufacturer's specifications to determine if OMECA77B kit is required. If rear bump stop measurements exceed 0mm remove rd leaf. OME greasable shackles OMEGS0 & greasable shackle fixed end pin kit OMEGP7 are mandatory fitment. OE shackles cannot be used. DXL extra leaf and UCB centre bolt is suitable for CS00RB spring. Cont LANDCRUISER II WAGON LWB Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS Estimated Lift: 0mm SPRING: CONSTANT 00 KGS 87 60089 87 60089 87 60090 87 60090 Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A BUNDERA RJ70 /98 TO 990 Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS Estimated Lift: 0mm PETROL & DIESEL ENGINES 870 6009 876 6009 87 6009 60096 TOYOTA 6009 fits left hand side. 60096 fits right hand side. Cont LANDCRUISER 70, 7, 7 SERIES SWB & MWB Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT STEERING DAMPER ANTI INVERSION KIT Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT PETROL & DIESEL ENGINES CS006F 60009 N9 CS006F 60009 OMESB OMEU OMEGS OMEGP OMESD FK08 CS07RA / B 6006 CS00RA / B 6006 OMESB OMEU9A OMEGS OMEGP OMEGP FK08 DXL UCB 6 6 + + 6 Vehicles with no front accessory weight will require the removal of the th leaf from the top of the spring stack. This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 00mm. If bump stop measurement exceeds 0-60mm remove rd leaf from top of spring stack to prevent shock absorber from topping out. Shackles: FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. Note: Spring Caster Wedge OMECW ( o Caster Wedges) may be required to restore positive caster angle. Front end alignment check will indicate required adjustment. There can be spigot sizes of the rear fixed end pins. Check spigot size before ordering greasable pins. 0mm spigot = OMEGP mm spigot = OMEGP When remaining stock of N8 and N9 is exhausted no further product will be available. DXL extra leaf and UCB centre bolt are suitable for CS00RA/B springs. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LANDCRUISER 60, 6 & 6 SERIES Estimated Lift: 0mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm PETROL ENGINE CS00F 60009 N9 CS00F 6006 OMESB OMEU OMEGS OMEGP OMESD FK08 DXL UCB TOYOTA CS00F 60009 - - CS00F 6006 OMESB OMEU OMEGS OMEGP OMESD FK08 DXL UCB SPRING: RIDE/LIGHT LOAD CS07RA / B + 600 6006 N9 8 CS00RA / B 6 + *6006 / 600 *6006 / 6006 N90 8 *N / N89 FITTING KIT FK0 FK0 SPRING: CONSTANT 00 KGS CS00RA / B 6 + 6006 6006 N90 8 N FITTING KIT SPRING BUSH KIT U BOLTS FK08 OMESB OMEU9B GREASABLE SHACKLE KIT OMEGS GREASABLE SHACKLE FIXED END PIN KIT OMEGP ANTI INVERSION KIT FK08 EXTRA LEAF DXL 6 CENTRE BOLT UCB DIESEL ENGINE 7 7 8 7 7 7 6 7 8 Front bump stop measurement must not exceed 00mm to ensure good shackle angle. To reduce bump stop gap, remove the th leaf from the top of the spring. OMECW Caster Wedge Kit may be required to restore correct caster angle. Shackles: FK08 Anti Inversion Kit is mandatory fitment if greasable shackles are not fitted. Refer OME Technical & Fitting Manual. Post 986 vehicles have a 9mm mounting pin and suit shock part no's N9 8, N90 8, N8 8, 6006 & 6006. Pre 986 vehicles have a 6mm mounting pin and suit shock part no's N9 8, N, N89, 600 & 6006. Fitting Kit is only required on vehicles with rubber insulators around rear springs. Refer OME Technical & Fitting Manual Section 7 GFI: LandCruiser 60 Series page 7 selection chart. Barn door Models may require A/A or B/B spring fitment. USA LHD Models require A/A or B/B spring fitment. DXL only suitable for CS00RA/B & CS00RA/B. DXL only suitable for CS00F & CS00F. When remaining stock of N8, N90, N9, N9 and N9 is exhausted no further product will be available. Page 06 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: mm SPRING: TO 0 KGS CS00F 60097 N8 SPRING: TO 0 KGS CS00F 60097 *N / N8 SPRING BUSH KIT See Chart Below U BOLTS - mm Eye Spring OMEU9A OMEU9B U BOLTS - mm Eye Spring OMEU9A OMEU GREASABLE SHACKLE KITS See Chart Below STEERING DAMPER OMESD ANTI INVERSION KIT FK08 EXTRA LEAF DXL CENTRE BOLT UCB8 SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS TRIM PACKER GREASABLE SHACKLE KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT KIT PART NO. OMEGS OMEGP OMEGS8 OMEGP8 OMEGS7 *GSP0 OMEGS9 OMEGP8 CS00R 600 N CS00R 6006 N See Chart Below OMEU9B TP0 See Chart Below FK08 D8XL UCB TOYOTA LANDCRUISER, 7 SERIES ALL LWB MODELS Estimated Lift: 0mm 8mm Shackle Pins & mm Hanger Bracket mm Shackle Pins & mm Hanger Bracket 8mm Shackle Pins & 0mm Hanger Bracket mm Shackle Pins & mm Hanger Bracket PETROL & DIESEL ENGINES * GSP0 is only a greasable pin replacement for original pin. FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. GREASABLE SHACKLES COMPATIBLE BUSH KIT OMESB OMESB0 OMESB79 OMESB0 Remove rd leaf from CS00R spring stack to reduce spring rate for light duty application. Include tray weight in constant load calculation. Page 07 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LANDCRUISER 0, SERIES SWB Estimated Lift: mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING BUSH KIT U BOLTS - mm Eye Spring U BOLTS - mm Eye Spring GREASABLE SHACKLE KITS STEERING DAMPER ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm SPRING: CONSTANT 0 KGS U BOLTS SPRING BUSH KIT GREASABLE SHACKLE KITS ANTI INVERSION KIT EXTRA LEAF CENTRE BOLT 8mm Shackle Pin mm Shackle Pin 8mm Shackle Pin mm Shackle Pin KIT PART NO. OMEGS OMEGP OMEGS8 OMEGP8 OMEGS OMEGP OMEGS9 OMEGP8 PETROL & DIESEL ENGINES CS00F 60097 N8 CS00F 60097 N OMESB0 OMESB OMEU9A OMEU9B OMEU9A OMEU See Chart Below OMESD FK08 DXL UCB8 CS00R 600 N89 CS00R *6006 / 600 N89 OMEU9A OMESB0 OMESB See Chart Below FK08 DXL UCB8 GREASABLE SHACKLES TOYOTA COMPATIBLE BUSH KIT OMESB OMESB0 OMESB OMESB0 OMESB0 suits mm spring eye and mm hanger bracket with mm shackle pin hole. OMESB suits mm spring eye and hanger bracket with 8mm shackle pin hole. FK08 Anti Inversion Kit is mandatory fitment front and rear if greasable shackles are not fitted. 97 and newer FJ 0's may need to use N76 shocks in rear: Pre 97 shock eye in the top of the axle housing: Use N89 / N9 / 600 / 6006 Post 97 lower shock eye is below leaf spring: Use N76 with OMEB Bush Kit When remaining stock of N9 is exhausted no further product will be available. Page 08 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TACOMA 06 ON Estimated Lift: 0mm SPRING: NO BAR 887 STRUT SPORT 900 SPRING: BAR ONLY STRUT SPORT 888 *90000 / 900 SPRING: BAR & WINCH 886 STRUT SPORT 90000 TRIM PACKER OME9PF UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 BP- SELECTION COIL OVER TACOMA LH BP90006L COIL OVER TACOMA RH BP90006R BP KIT TACOMA VM800006 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS EXTRA LEAF U BOLT SPRING BUSH KIT DRIVESHAFT SPACER KIT BP- SELECTION SHOCK ABSORBER TACOMA LH SHOCK ABSORBER TACOMA RH BP KIT TACOMA EL09R 6009 EL096R 6009 EL6XL OMEUB OMESB08 FK9 BP600L BP600R VM800007 TOYOTA No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Page 09 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TACOMA V6 00 TO 0 Estimated Lift: 0mm SPRING: TO 0 KGS 88 *90000 / 900 STRUT N0S SPRING: TO 00 KGS 886 90000 STRUT N0S UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 BP- SELECTION COIL OVER TACOMA LH BP90006L COIL OVER TACOMA RH BP90006R BP KIT TACOMA VM800006 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS EXTRA LEAF CENTRE BOLT U BOLT SPRING BUSH KIT DRIVESHAFT SPACER KIT BP- SELECTION SHOCK ABSORBER TACOMA LH SHOCK ABSORBER TACOMA RH BP KIT TACOMA EL09R 6009 EL096R 6009 EL6XL UCB7 OMEUB OMESB08 FK9 BP600L BP600R VM800007 TOYOTA No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Cont TACOMA V6 & CYLINDER 998 TO 00 Estimated Lift: mm SPRING: TO 0 KGS 880 9000 STRUT N9SC SPRING: TO 00 KGS 88 9000 Estimated Lift: mm EXTRA LEAF SPRING BUSH KIT GREASABLE SHACKLE KIT EXHAUST BRACKET KIT CS06RA / B *6006 / 6006 DXL OMESB88 OMESB89 OMEGS FK + OMESB88 must be used with OMEGS greasable shackles. OMESB89 must be used with original shackles. FK Exhaust Bracket is mandatory fitment to ensure exhaust system clears springs. When remaining stock of N8 and N9SC is exhausted no further product will be available. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A HILUX 0 ON Estimated Lift: 0mm SPRING: NO BAR 869 STRUT - SPORT 9008 SPRING: BAR ONLY 88 STRUT - SPORT 9008 SPRING: BAR & WINCH 88 STRUT - SPORT 9009 SPRING: BAR, WINCH & ACCESSORIES 887 STRUT - SPORT 9009 TRIM PACKER OME9PF UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 BP- SELECTION COIL OVER 0 HILUX RH BP90007R COIL OVER 0 HILUX LH BP90007L BP KIT HILUX 0 VM800008 Estimated Lift: 0mm SPRING MEDIUM SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT FOR EL09R HALOGEN HEADLAMP LEVELLING BRACKET LEAF SPRING EYE BOLT BP- SELECTION SHOCK ABSORBER 0 HILUX RH SHOCK ABSORBER 0 HILUX LH BP KIT HILUX 0 EL089R 60 EL090R *60 / 60 EL09R 7 60 OMESB98 OMEUA OMEUB OMEGS ELXL UCB9 FK86 BP6008R BP6008L VM800009 TOYOTA DIESEL ENGINES 69 To maintain coil clearance from the sway bar, the coil seat must be installed with the helix facing away from the sway bar. No top mounting bushes supplied use OME. OE bushes may be re-used if in good condition. Include tray weight in constant load calculation. ELXL will give approximately 0mm extra lift or increase loading capacity at design height by approximately 00kgs. Strut Top Hat Kit may be required if original equipment is worn. 6 The Halogen Headlamp Levelling Bracket is a mandatory fitment for SR versions only. 7 Leaf Spring front eye bolt 69 required for fuel tank side and is available as a spare part. Refer to the Spare Parts Price List for pricing. 7 8 7 8 9 8 9 8 6 7 8 9 Use OMEUA for EL089R and EL090R. Use OMEUB for EL090R with extra leaf and EL09R. When adding Extra Leaf to EL09R please add UCB9. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: 0mm SPRING: NO BAR STRUT - SPORT STRUT SPRING: BAR ONLY STRUT - SPORT STRUT SPRING: BAR & WINCH STRUT - SPORT STRUT TRIM PACKER UPPER STRUT BUSHES STRUT TOP HAT KIT BP- SELECTION - COIL OVER HILUX LH COIL OVER HILUX RH BP KIT HILUX SPRING: LOW LIFT 0mm SPRING: LIGHT LOAD SPRING: CONSTANT 00 KGS SPRING: CONSTANT 600 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT BRAKE PROPORTIONING BRACKET EXTRA LEAF BP- SELECTION SHOCK ABSORBER HILUX LH SHOCK ABSORBER HILUX RH BP KIT HILUX 88 *9000 / 900 *N67S / N66S 88 9000 N67S 88 9000 N67S OME9PF OME OMETH00 BP9000L BP9000R VM800000 CS0R- 60006 N68 EL0R 60006 N68 EL0R 60006 *N69 / N68 EL0R 60007 N69 EL07R 60007 N69 OMESB98 OMEUA OMEGS FK9 ELXL TOYOTA HILUX/VIGO 00 TO 0 Estimated Lift: mm 6 7 DIESEL ENGINES BP600L BP600R VM800000 08 *9000 / 900 *N67S / N66S 88 *9000 / 900 *N67S / N66S 88 9000 N67S OME9PF OME OMETH00 To maintain coil clearance from the sway bar, the coil seat must be installed with the helix facing away from the sway bar. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Include tray weight in constant load calculation. Strut Top Hat Kit may be required if original equipment is worn. When remaining stock of N69 is exhausted no further product will be available. PETROL ENGINES ELXL will give approximately mm extra lift or increase loading capacity at design height by approximately 00kgs. 6 6 6 7 Vehicles with Long Range fuel tank may have clearance problems if OME Greasable Shackle Kits are installed. Additional installation charges may be incurred. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TORSION BARS: OVER 0 KGS STEERING DAMPER SPRING: CONSTANT 0 KGS SPRING: CONSTANT 0 KGS SPRING: CONSTANT 00 KGS SPRING BUSH KIT GREASABLE SHACKLE KIT ANTI INVERSION KIT U BOLT FITTING KIT EXTRA LEAF CENTRE BOLT CS08R 600 + 600 CS09R 600 + 600 CS00R 600 + 600 CS0R 600 + 600 OMESB OMEGS7 FK OMEUA FK0 D6XL UCB6 TOYOTA HILUX/TIGER 997 TO 00 Estimated Lift: 0mm PETROL & DIESEL ENGINES 000 600 OMESD + + + + Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. 600 is longer in length and must be fitted to right hand side only. Fitment to left hand side may cause damage to shock absorber and vehicle. Mandatory Fitment: Either OMEGS7 or FK Anti Inversion Kit required to prevent possible spring inversion. 6 6 Fitment of FK0 Spacer Washers to U bolts is required to ensure correct tension is obtained on U bolts. Include tray weight in constant load calculation. D6XL suitable for CS09R, CS00R and CS0R. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Estimated Lift: mm SPRING: TO 0 KGS SPRING: TO 0 KGS SPRING BUSH KIT FITTING KIT GREASABLE SHACKLE KIT GREASABLE SHACKLE FIXED END PIN KIT STEERING DAMPER EXTRA LEAF CENTRE BOLT Estimated Lift: 0mm PETROL ENGINES CS008FA / B 6006 CS009FA / B 6006 OMESB OMEU + OMEU + OMEUB FK0 OMEGS OMEGP OMESD D7XL UCB7 TOYOTA HILUX & RUNNER PRE 997 ALL LEAF SPRING MODELS U BOLTS + CS009FA / B + 6006 + CS009FA / B + 6006 OMESB + OMEU + + + OMEU + + OMEUB FK0 OMEGS OMEGP OMESD D7XL UCB7 CS009R 6 7 *6006 / 600 *6006 / 6006 N9 8 N89 SPRING: CONSTANT 0 KGS CS00R 6 7 6006 6006 N89 U BOLTS SPRING BUSH KIT OMEU OMESB6 GREASABLE SHACKLE KIT OMEGS GREASABLE SHACKLE FIXED END PIN KIT OMEGP TRIM PACKER TP0 ANTI INVERSION KIT FK09 FK 6 EXTRA LEAF DXL CENTRE BOLT UCB6 DIESEL ENGINES 9 9 6 7 8 9 A/A spring fitment may be needed on some vehicles for trimming purposes. Petrol HiLux may require FK0 (Saddle Correction Plates) if the spring seats are distorted. FK0 must be fitted to all Diesel & Petrol Models used off road. Refer OME Technical & Fitting Manual. OMEU is required when fitting OME springs to stop the U bolt contacting the drag link. Refer OME Technical & Fitting Manual. OMEU and OMEUB for drivers side. OMEU for passenger side. A trim packer may be required to trim vehicle. Only to be used on rear springs. Post 98 vehicles have a 9mm mounting pin and suit shock part numbers: N8 8, N9 8, 6006 and 6006. Pre 98 vehicles have a 6mm mounting pin and suit shock part numbers: N89, N9 8, 600 and 6006. If greasable shackles are not fitted Anti Inversion Kits must be fitted. FK09 fits all pre 98 Models. FK fits all 98 Models On. Include tray weight in constant load calculation. To provide correct shackle angle, 98-89 automatic Runner Models require the rd leaf to be removed to reduce spring rate. When remaining stock of N8, N9 and N9 is exhausted no further product will be available. Only Suits CS008FA/B. Do not fit to CS009FA/B. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A HILUX PRE 997 EXTRA CAB & DUAL CAB SR IFS & LEAF MODELS TORSION BARS: 0 KGS STEERING DAMPER Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING BUSH KIT U BOLTS GREASABLE SHACKLE KIT EXTRA LEAF CENTRE BOLT 000 6007 OMESD CS09R 6006 N9 CS00R 6006 N9 OMESB OMEU OMEUB OMEGS7 D6XL UCB6 TOYOTA PETROL & DIESEL ENGINES Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Compare original spring stack height to OME spring stack to decide whether OMEU or OMEUB U bolts are required. Include tray weight in constant load calculation. When remaining stock of N8 and N9 is exhausted no further product will be available. Page OME INT CAT. NO.8 SEPTEMBER 08

TOYOTA Cont RUNNER 00 ON (USA MODEL) Estimated Lift: 0mm SPRING: NO BAR 88 STRUT - SPORT 9000 SPRING: BAR ONLY 88 STRUT - SPORT 9000 SPRING: BAR AND WINCH 88 STRUT - SPORT 9000 TRIM PACKER OME9PF UPPER STRUT BUSHES OME STRUT TOP HAT KIT OMETH00 BP- SELECTION - NON KDSS MODELS BP- COIL OVER RH BP9000R BP- COIL OVER LH BP9000L BP- FIT KIT VM800008 BP- SELECTION - KDSS MODELS BP- COIL OVER LH BP9000L BP- COIL OVER RH BP9000R BP- FIT KIT VM8000009 Estimated Lift: 0mm SPRING: CONSTANT 00 KGS SPRING: CONSTANT 00 KGS TRIM PACKER STONE GUARD KIT BP- SELECTION BP- SHOCK BP- FIT KIT V6.0L PETROL ENGINE 89 60080 896 *6008 / 60080 897 6008 OME0PR0 OME66 BP600 VM800000 LWB MODEL Vehicles with KDSS, must have x OME9PF packer installed on the front right hand side to maintain correct trim. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. OME66 Lower Shock Mount Stone Guard is recommended fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. Strut Top Hat Kit may be required if original equipment is worn. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TOYOTA RUNNER 00 TO 00 (USA MODEL) Estimated Lift: -0mm SPRING: NO BAR STRUT - SPORT STRUT SPRING: TO 7 KGS STRUT - SPORT STRUT TRIM PACKER UPPER STRUT BUSHES STRUT TOP HAT KIT Estimated Lift: 0mm SPRING: CONSTANT 0 KGS SPRING: CONSTANT 00 KGS STONE GUARD KIT 88 90000 N0S 88 90000 N0S OME9PF OME OMETH00 89 6000 N 896 *6000 / 6000 897 6000 OME66 OME front coils can only be installed with OME Nitrocharger strut and coil seats. No top mounting bushes supplied, use OME. OE bushes may be re-used if in good condition. Strut Top Hat Kit may be required if original equipment is worn. Cont RUNNER/TOYOTA SURF 996 TO 00 (USA MODEL) Estimated Lift: 0mm SPRING: TO 0KGS SPRING: TO 00KGS Estimated Lift: 0mm 880 88 9000 906 SPRING: CONSTANT 0KGS 890 *6007 / 6008 N86 PETROL & DIESEL ENGINES Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A TOYOTA RUNNER 990 TO 996 (TO 99 IN USA) IFS COIL SPRING MODELS TORSION BARS: OVER 0 KGS STEERING DAMPER Estimated Lift: 0mm SPRING: CONSTANT 0 KGS PETROL & DIESEL ENGINES 000 6007 OMESD 900 6007 N7F 90 6007 N7F Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. When remaining stock of N7F is exhausted no further product will be available. Cont RUNNER 986 TO 990 (TO 989 IN USA) IFS LEAF SPRING MODELS TORSION BARS: OVER 0 KGS 000 6007 STEERING DAMPER OMESD Estimated Lift: 0mm CS009R 6006 N9 SPRING: CONSTANT 00 KGS CS00R 6006 SPRING BUSH KIT OMESB6 U BOLTS OMEU OMEUB GREASABLE SHACKLE KIT OMEGS GREASABLE SHACKLE FIXED END PIN KIT OMEGP EXTRA LEAF DXL CENTRE BOLT UCB6 PETROL & DIESEL ENGINES Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Compare original spring stack height to OME spring stack to decide whether OMEU or OMEUB U bolts are required. Install OE caster wedges from OE spring stack onto OME springs. Ensure wedges are fitted as per original position. When remaining stock of N8 and N9 is exhausted no further product will be available. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPRING: NO BAR 079 STRUT - SPORT 900 SPRING: BAR 080 STRUT - SPORT 900 SPRING: BAR & WINCH 080 STRUT - SPORT 900 TRIM PACKER OME9PF CS06R 6008 SPRING: CONSTANT 00 KGS CS06R 6008 SPRING BUSH KIT OMESB0 STONE GUARD KIT OME66 U BOLTS - MEDIUM SPRING OMEU9A - CONSTANT 00KGS SPRING OMEU9B EXTRA LEAF D8XL CENTRE BOLT UCB7 VOLKSWAGEN AMAROK 00 ON Estimated Lift: 0mm Estimated Lift: 0mm CYLINDER DIESEL ENGINE 7 7 DIESEL ENGINE 080 900 7 900 7 6 900 7 OME9PF Top mount bump stop and bushes not supplied, re-use OE items. For trimming purposes only, maximum packer per strut. Workshop fitting kit FK recommended for easier bush install (note: one FK kit required per workshop). 6 7 6 V6 DIESEL ENGINE 6 7 OME66 Lower Shock Mount Stone Guard is mandatory fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces. D8XL will give approximately mm extra lift or increase loading capacity at design height by approximately 60kgs. To achieve 0mm lift for bar and winch, OME9PF will need to be fitted with 080 coil. Volkswagen Service Manual quotes that driveshaft bolts are a one use only. It is recommended to replace bolts. Replacement bolts Volkswagen Part Number N90990 are to be sourced separately. Fitting Time: Due to the complexity of installation allow hours for complete install. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

LOC'N Cont MODEL YEAR DESCRIPTION OME P/NO. NOTE DAIHATSU F Series All Models Feroza All Models Rocky All Models FORD Courier All Models Maverick SWB & Wagon Models /9 on F Sway bar - link lower OMESB60 7 R Sway bar - link upper OMESB60 7 0/88 on F Sway bar - link inner/outer OMESB60 7 /8 to 9 F Sway bar - link eye OMESB00 7 /87 on F Sway bar - link OMESB6 R Spring bush OMESB8 6 8/87 to 9/9 F Caster Kit OMECA77B 8 Coil Packer - mm OMEGQPF0 8 Coil Packer - 0mm OMEGQPF0 8 Control arm - to diff front/centre (std) OMESB00 8 8 Control arm - to chassis OMESB006 8 Panhard rod OMESB00 8 Sway bar - D mount (mm) OMESB6 8 Sway bar - link OMESB79 8 8 R Coil Packer - mm OMEGQPR0 9 Coil Packer - 0mm OMEGQPR0 9 Control arm - upper OMESB006 8 9 Control arm - lower OMESB006 8 9 Panhard rod OMESB00 9 Sway bar - link OMESB79 8 9 Maverick Single Cab Models Leaf Springs Spring & shackle bush kit OMESB6 6 Suits OME springs only GMH / ISUZU Drover /8 on F Spring bush OMESB9 6 R Spring bush OMESB9 6 Suits OE & OME springs Jackaroo / Trooper Models UBS 6 & 7 8/8 to 9 R Spring & shackle bush kit OMESB90 6 Suits OE & OME springs Rodeo - Isuzu Pick Up Models All Models 8 to 87 R Spring bush OMESB80 6 Suits OE & OME springs V6 Models Only 88 on R Spring bush OMESB80 6 Suits OE & OME springs LADA Niva LAND ROVER Defender 90, 0 & 0, 0 Long Travel, 0 Long Travel Models County 0 Model Discovery All Models Range Rover Range Rover MAZDA B00 & B600 B00 & B600 SUSPENSION BUSH KIT SELECTION ALL F Coil Packer - 0mm OMELNF0 9 on F Caster kit CALR 8 8 to 9 F Caster kit CALR 8 89 to 99 F Caster kit CALR 8 7 to 86 F Caster kit CALR 8 86 to 9 F Caster kit CALR 8 /87 to 98 F Sway bar - link OMESB6 7 R Spring bush OMESB8 6 MITSUBISHI Challenger PA Wagon (Rear Leaf Springs) 98 to /00 R Spring bush OMESB8 6 Pajero NG 9/89 to /9 F Sway bar - link inner OMESB6 Suits V6 & intercooled diesel models NA, NB, NC, ND, NE, NF & NG 8 to /9 F Sway bar - link inner/outer OMESB60 Suits cyl petrol & diesel models not intercooled All Leaf Spring Models /9 on R Spring bush OMESB8 6 Triton Club Cab Model Only F Sway bar - link inner/outer OMESB60 R Spring bush OMESB8 6 MK Models 0/96 on R Spring & shackle bush kit OMESB8 6. When remaining stock of OMESB60 is exhausted, no further product will be available. cont. Page 0 OME INT CAT. NO.8 SEPTEMBER 08 KITS REQ BUSHES IN KITS DIAGRAM # Suits mm wide control arms Suits 8mm wide control arms Suits mm wide control arms Suits 8mm wide control arms Suits mm wide control arms

LOC'N Cont MODEL YEAR DESCRIPTION OME P/NO. NOTE NISSAN Navara D All Navara D All Pathfinder All Patrol MQ (Round Head Lights) MQ (Square Head Lights) MQ All Models SUSPENSION BUSH KIT SELECTION 9/8 to 97 F Sway bar - link OMESB79 8 R Spring & shackle bush kit OMESB8 6 /97 on Sway bar - link upper OMESB79 8 R Spring & shackle bush kit OMESB8 6 Suits models to 8/0 R Spring & shackle bush kit OMESB9 6 Suits models 0/0 on 8/86 to 9 F Sway bar - link OMESB79 8 80 to 8/8 F Spring (front eye) bush kit OMESB8 8/8 to 87 F Spring (front eye) bush kit OMESB 80 to 87 F Spring (rear eye) bush kit OMESB9 R Spring & shackle bush kit OMESB Spring bush OMESB9 Y60, GQ /87 to 97 F Body mount - bumper area F Body mount - cab front KITS REQ BUSHES IN KITS OMESB9090 OMESB909 F Body mount - cab centre OMESB909 F Body mount - cab front & centre OMESB909 F Caster kit - Control arm OMECA77B 8 F Control arm - to axle OMESB00 8 8 F Control arm - to chassis OMESB006 8 F Spring - eye front/rear & shackle OMESB 6 Suits leaf spring models F Panhard rod - bush OMESB00 8 F Sway bar - link OMESB79 8 8 Suits coil spring models F Coil Packer - mm Coil Packer - 0mm OMEGQPF0 OMEGQPF0 R Body mount - cab rear to axle OMESB909 Suits all wagon models R Body mount - cab rear to axle OMESB909 Suits all hardtop models R Panhard rod - bush OMESB00 9 Not suitable before 9/89 R Spring - eye front/rear & shackle OMESB6 6 Leaf spring models R Sway bar - link OMESB79 8 9 Suits CC models with coil suspension R Control arm - lower OMESB006 8 9 R Control arm - upper OMESB006 8 9 R Coil Packer - mm Coil Packer - 0mm OMEGQPR0 OMEGQPR0 Y6, GU 0/97 on F Body mount - bumper area OMESB9090 Suits wagon & hardtop, no kit available for CC F Body mount - cab front OMESB909 Suits all wagon & hardtop models Body mount - cab centre OMESB909 Suits all wagon & hardtop models F Body mount - cab front & centre OMESB909 Suits all CC models F Caster kit - Control arm - to axle OMECA77B 8 F Control arm - to axle OMESB00 8 8 F Control arm - to chassis OMESB006 8 0/97 on F Panhard rod - bush OMESB00 8 Suits CC all models & wagon to 0/00 F Sway bar - link OMESB79 8 8 Suits coil spring models to 00 F Sway bar - mount mm OMESB6 8 Does not suit ZD0 wagon R Body mount - cab centre to axle OMESB909 Suits all wagon models Body mount - cab centre to axle OMESB909 Suits all hardtop models R Panhard rod - bush OMESB00 9 R Trailing arm - lower OMESB006 8 9. When remaining stock of OMESB9090 and OMESB909 is exhausted, no further product will be available. cont. DIAGRAM # Use with OMESB9/OE springs use OMESB Use with OMESB9 suits OME springs Suits OE & OME springs Suits OME springs Suits wagon & hardtops, no kit available for CC Suits all wagon to /9 & all hardtop models Suits all wagon & hardtop models Suits pick up & CC models Page OME INT CAT. NO.8 SEPTEMBER 08

LOC'N ContenMODEL YEAR DESCRIPTION OME P/NO. NOTES NISSAN (Continued) Patrol - cont. SUSPENSION BUSH KIT SELECTION Y6, GU - cont. 0/97 on R Sway bar - link OMESB79 8 9 KITS REQ BUSHES IN KITS DIAGRAM # R Trailing arm - upper OMESB006 8 9 R Coil Packer - mm OMEGQPR0 Coil Packer - 0mm OMEGQPR0 Suits CC models with coil suspension. SUZUKI Jimny SN R Coil Packer - 0mm OMESJR0 LJ0 7 to 6/78 F Spring Bush OMESB Suits OE & OME springs 7 to 6/78 R Spring Bush OMESB Suits OE & OME springs LJ80 7/78 to /8 F Spring Bush OMESB9 Suits OE & OME springs R Spring Bush OMESB9 Suits OE & OME springs Sierra SJ0 & SJ 7/8 to 9 F Spring Bush OMESB9 Suits OE & OME springs R Spring Bush OMESB9 Suits OE & OME springs TOYOTA Runner Leaf Spring Front & Rear Runner (Surf) LN60, YN60 7/8 to 0/8 F Spring - bush kit OMESB 6 Suits OE & OME springs R Spring - bush kit OMESB6 6 Suits OE & OME springs Runner IFS Front Leaf Spring Rear Runner (Surf) LN6, YN6 /8 to 9/89 R Spring - bush kit OMESB6 6 Suits OE & OME springs HiLux IFS Front & Coil Spring Rear Runner (Surf) LN0, RN0, VZN0, YN0 0/89 to 6/96 F Sway bar - mount mm OMESB009 R Sway bar - link OMESB9 8 7 Suits LN0, RN0 models R Sway bar - link OMESB00 7 Suits VZN0, YN0 models HiLux WD Leaf Spring Front & Rear HiLux (Surf) LN6, 6 RN6, 6 /79 to 0/8 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - link OMESB9 8 R Spring - bush kit OMESB6 6 Suits OE & OME springs HiLux (Surf) LN6, YN 6, 67 /8 to 9/88 F Spring - bush kit OMESB 6 Suits OE & OME springs R Spring - bush kit OMESB6 6 Suits OE & OME springs HiLux (Surf) RN0, LN06 0/88 to /97 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - mount mm OMESB009 R Spring - spring bush OMESB6 6 Suits OE & OME springs HiLux WD IFS Front & Leaf Spring Rear HiLux (Surf) LN07,, RN06, 0, 0/88 to /97 F Sway bar - mount mm OMESB009 R Spring - bush kit OMESB 6 Suits OME springs only LN67, 7, RZN69, 7 /97 on F Sway bar - link OMESB9 8 F Sway bar - mount mm OMESB009 R Spring - bush kit OMESB 6 Suits OME springs only KZN6 /99 on F Sway bar - link OMESB00 F Sway bar - mount mm OMESB009 R Spring - bush kit OMESB 6 Suits OME springs only LandCruiser 0 Series BJ0,, FJ0,,,JH, 7 969 to /8 F Spring - bush kit-to suit mm ID OMESB0 6 Suits mm spring eye F Spring - bush kit-to suit 8mm ID OMESB 6 Suits mm spring eye R Spring - bush kit-to suit mm ID OMESB0 6 Suits mm spring eye R Spring - bush kit-to suit 8mm ID OMESB79 6 Suits mm spring eye & 0mm hanger bracket R Spring - bush kit-to suit 8mm ID OMESB 6 Suits mm spring eye LandCruiser 60 Series FJ60, 6, HJ60, 6 /80 to 8/87 F Spring - bush kit OMESB 6 F Sway bar - link OMESB9 8 R Spring - bush kit OMESB 6 Suits OE & OME springs R Sway bar - mount mm OMESB7 FJ6, HJ60, 6 8/87 to /9 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - link OMESB9 8 cont. Page OME INT CAT. NO.8 SEPTEMBER 08

ContenMODEL SUSPENSION BUSH KIT SELECTION YEAR LOC'N DESCRIPTION OME P/NO. TOYOTA (continued) LandCruiser 60 Series - cont. FJ6, HJ60, 6 - cont. 8/87 to /9 F Sway bar - mount mm OMESB7 Suits models to /90 R Spring - bush kit OMESB 6 Suits OE & OME springs R Sway bar - mount mm OMESB7 LandCruiser 70 Series Bundera (Prado NZ) LJ70, RJ70 /8 to /9 F Panhard rod - bush OMESB8 0 Suits models to 8/87 F Sway bar - link OMESB6 8 0 F Sway bar - mount mm OMESB7 0 Suits models 8/87 - /90 F Sway bar - mount mm OMESB009 0 BJ70, 7, 7 /8 to /90 F Spring - bush kit OMESB 6 Suit OE & OME springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB7 Suits models to /86 F Sway bar - mount mm OMESB006 Suits models 6/86 on R Spring - bush kit OMESB 6 Suits OE & OME springs HJ7 /8 to /90 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB7 Suits models to /86 F Sway bar - mount mm OMESB006 Suits models 6/86 on R Spring - bush kit OMESB6 6 FJ70, 7, 7 /8 to 0/9 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB7 Suits models to /86 F Sway bar - mount mm OMESB006 Suits models 6/86 on F Sway bar - mount mm OMESB009 Suits FJ7 models to 8/9 R Spring - bush kit OMESB6 6 Suits FJ70, 7 models R Spring - bush kit OMESB 6 R Sway bar - mount mm OMESB009 Suits bracket height = 8mm FZJ70, 7, HZJ70, 7, 7 /88 to /99 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - link OMESB6 8 F Sway bar - mount mm OMESB006 Suits HZJ7 models to /9 F Sway bar - mount mm OMESB009 Suits HZJ7 models to /9 F Sway bar - mount mm OMESB009 Suits /9 on bracket height = 8mm R Spring - bush kit OMESB6 6 Suits FJ7 models R Spring - bush kit OMESB 6 Suits HZJ70 & 7 models R Sway bar - mount mm OMESB009 Suits /9 on bracket height = 8mm PZJ70, 7 /90 to /9 F Spring - bush kit OMESB 6 Suits OE & OME springs F Sway bar - link OMESB6 8 R Spring - bush kit OMESB 6 Suits OE & OME springs FZJ78, 79, HDJ78, 79, HZJ78, 79 8/99 on F Caster kit OMECA77B 0 Caster align offset degree F Control arm - to chassis OMESB000 0 F Sway bar - link outer OMESB 0 Contains new bolts, nuts & crush tubes F Sway bar - mount mm OMESB 0 F Panhard rod - bush OMESB006 0 R Sway bar - link inner OMESB00 8 R Sway bar - link outer lower OMESB00 R Sway bar - link outer upper OMESB00 Sway bar - mount mm OMESB009 Suits bracket height = 8mm Spring - bush kit OMESB86 6 Suits FZJ / HDJ / HZJ78 models with OME springs Spring - bush kit OMESB8 6 Suits FZJ / HDJ / HZJ79 models with OME springs. When remaining stock of OMESB8 and OMESB006 is exhausted, no further product will be available. KITS REQ BUSHES IN KITS DIAGRAM # NOTES cont. Page OME INT CAT. NO.8 SEPTEMBER 08

LOC'N ConteMODEL YEAR DESCRIPTION OME P/NO. NOTES TOYOTA (continued) LandCruiser 70 Series - cont. FZJ78, 79, HDJ78, 79, HZJ78, 79 - cont. LandCruiser 80 Series FJ80, FZJ80, HDJ80, HZJ80 LandCruiser 00 Series FZJ0, HZJ0 Solid Axle LandCruiser Lexus HDJ00, UZJ00 (Lexus) IFS Tacoma Tacoma V6 Tacoma V6 & Cylinder SUSPENSION BUSH KIT SELECTION 8/99 on Spring - bush kit OMESB8 6 /90 to /98 F Caster kit OMECA77B 0 KITS REQ BUSHES IN KITS DIAGRAM # F Control arm - to chassis only OMESB000 0 F Panhard rod - bush OMESB006 0 F Control arm - complete kit OMESB00 6 0 F Sway bar - link upper OMESB00 0 F Sway bar - link lower OMESB00 0 F F F Sway bar - mount mm Sway bar - mount 6mm Sway bar - mount 6mm OMESB006 0 OMESB009 0 OMESB009 0 F Sway bar - mount 9mm OMESB009 0 F Coil Packer - mm OME80PF0 0 F Coil Packer - 0mm OME80PF0 0 R Panhard rod - bush OMESB00 8 R Sway bar - link lower OMESB00 8 R Sway bar - link upper OMESB00 8 R Sway bar - mount mm OMESB009 8 R Sway bar - mount mm OMESB009 8 R Control arm - lower OMESB007 8 8 R Control arm - upper OMESB008 8 8 /98 on F Caster kit OMECA77B 0 F Control arm - complete kit OMESB00 6 0 F Control arm - to chassis only OMESB000 0 F Panhard rod - bush OMESB006 0 F Sway bar - link lower OMESB00 0 F Coil Packer - mm OME80PF0 F Coil Packer - 0mm OME80PF0 F Sway bar - mount 9mm OMESB009 0 R Sway bar - link upper OMESB00 8 R Sway bar - link lower OMESB00 8 R Panhard rod - bush OMESB00 9 R Sway bar - mount mm OMESB009 8 R Control arm - lower OMESB007 8 8 R Control arm - upper OMESB008 8 8 R Coil Packer - mm OME80PR0 R Coil Packer - 0mm OME80PR0 /98 on F Sway bar - link upper OMESB6 7 R Sway bar - link OMESB9 8 7 06 On R Spring - bush kit OMESB08 00 To 0 R Spring - bush kit OMESB08 998 To 00 R Spring bush OMESB88 R Spring bush OMESB89 Suits all models with OME springs & greasable shackles Caster align offset degree Suits bracket height = mm Suits bracket height = mm Suits bracket height = 8mm Suits bracket height = 8mm Suits bracket height = mm Suits large bracket height = 8mm Caster align offset degree STD replacement Suits large bracket height = 8mm Suits bracket height = 8mm Suits OMEGS greasable shackles Suits original shackles only. When remaining stock of OMESB006, OMESB009 and OMESB009 is exhausted, no further product will be cont. Page OME INT CAT. NO.8 SEPTEMBER 08

SUSPENSION BUSH KIT SELECTION Conten SWAY BARS D BUSH EYE BUSH LINK LINK BUSH OMESTAB OMESB00 (PR) OMESB0 (PR) OMESTAB OMESB0 (PR) OMESB06 (PR) N/A N/A OMESTAB OMESB07 (PR) N/A N/A OMESTAB OMESB08 (PR) OMESB06 (PR) OMESB09 (EA) OMESB0 (PR) OMESTAB6 OMESB07 (PR) OMESB06 (PR) OMESB09 (EA) OMESB0 (PR) OMESTAB7 OMESTAB8 OMESTAB9 OMESB00 (PR) OMESB0 (PR) OMESB06 (PR) OMESB09 (EA) OMESB0 (PR) PANHARD RODS D BUSH EYE BUSH LINK LINK BUSH PANRJK00 PANRJK00 N/A N/A OMESB0 (pk) OMESB0 (pk) N/A N/A N/A N/A PANR00 N/A OMESB00 EYELETS N/A N/A PAN097A N/A OMESB00 EYELETS N/A N/A PANR00 N/A OMESB00 EYELETS N/A N/A PANR08X PANR09X N/A N/A OME098 x OME098 x SPHERICAL SPHERICAL OMESB00 x OMESB00 x EYELET EYELET N/A N/A N/A N/A PANR007 N/A OMESB006 EYELETS N/A N/A PANR008 N/A OMESB00 EYELETS N/A N/A PAN00 N/A OMESB006 EYELET N/A N/A CONTROL ARMS OME P/NO. LCAJKFR OMESB0 SINGLE LCAJKRR OMESB0 SINGLE LTA0 OMESB09 PAIR LTA0 OMESB08 PAIR UCAJKFR OMESB0 SINGLE UCAJKRR OMESB06 SINGLE UTA06 OMESB07 PAIR UTAA06 OMESB07 PAIR. When remaining stock of OMESTAB is exhausted, no further product will be available. Page OME INT CAT. NO.8 SEPTEMBER 08

DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS Contents!A Diagram. Diagram. Diagram. Diagram. Diagram. Diagram 6. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS Contents!A Diagram 7. Diagram 8. Diagram 9. Diagram 0. Diagram. Diagram. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK / STRUT BUSH Kit No. OMESB Component Description spring bush PT60 Qty 6 To Fit Toyota mm spring eye, 8mm pin OE & OME Series F/H/B, J/ZJ: 7, 7, 7, 70, 60, 7,,, 0 Nissan GQ Patrol leaf spring models OME only OMESB OMESB spring bush PT80 spring bush PT8 spring bush PT8 Nissan MQ Patrol all models - rear OE spring Nissan MQ Patrol round headlight models-front OE spring eye OMESB OMESB OMESB6 OMESB7 spring bush PT0 spring bush PT9 spring bush PT0 spring bush PT spring bush PT OBSOLETE 6 6 OBSOLETE Toyota HiLux all models (except IFS front) Toyota HiLux all models (except SR & extra cab rear) Toyota FJ all models front & rear, Series rear only OE springs 0mm eye OMESB8 OMEB9 OMEB0 OMEB OMEB OMEB OMEB OMEB OMESB6 OMEB7 OMEB8 spring bush PT90 spring bush PT9 spring bush PT9 shock bush SP78 / 9 shock bush SP06 (cotton reel type) shock bush OME066 / 6 shock bush kit shock bush SP09 shock bush OME78 / 6 shock bush OME066 / 9 spring bush PT70 shock bush OME066 / sleeve B7S x 6 x OBSOLETE 6 Mitsubishi Pajero leaf spring models & L00 models Small eye bush with 9mm bore Small eye shock mount Converts large eye 9mm bore to a 6mm bore Pin x 60 replacement bush Pin 0 x 60 replacement bush Small eye with 6mm bore Large eye with 9mm bore 0mm spring eye for Toyota 7 series rear springs Large eye tapered bush with sleeve Converts small eye bush to suit 9mm bore with sleeves OMESB9 Suzuki Sierra all models except LJ0 front & rear springs OMESB0 spring bush PT0 spring bush PT0 sleeve B9S 6 x x 6 spring bush PT9 OMESB spring bush PT0 spring bush PT0 spring bush PT0 sleeve 6 x x 6 OMEB7 sleeve 6 x. x front & rear bottom mount. OMESB8 spring bush PT8 Nissan MQ Patrol early model (round headlights) - front spring, front eye (to be fitted with OMESB9) OMESB9 spring bush PT8 & sleeve Nissan MQ Patrol all models - front spring, rear eye (to be fitted with OMESB8) OMESB0 spring bush PT6 spring bush PT9 Toyota LandCruiser /7 Series front spring with mm spring eye and hanger bracket with mm pin hole OMESB spring bush PT8 Nissan MQ Patrol late model (square headlights) - front spring, front eye (to be fitted with OMESB9) OMEB6 OMESB8 shock bush OME066 / 9 spring bush PT9 large eye 9mm bore All Triton to 997 and L00 - rear - suits OME OMEB0 spring bush PT9 spring bush PT0 sleeve 9 x. x 8 shock bush OME 066-9MGQ OMEB shock bush 0IY 8 pin x 70 replacement. When remaining stock is exhausted no further product will be available. cont. 6 Toyota LandCruiser 0 series mm OE spring front & rear. Toyota series OE front spring only mm eye. Suzuki LJ0 front & rear N & N8 being converted for fitment to CJ Jeep and Cherokee wagon 8 on front bottom mount. Mahindra springs only N0, NF & N9 Patrol GQ lower mount - rear shock Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK / STRUT BUSH Kit No. OMESB OMESB7 OMESB6 OMESB7 OMESB76 OMEB77 Component Description spring bush PT0 spring bush PT09 spring bush PT sleeve 9 x. x 68 spring bush PT06 spring bush PT07 sleeve 9 x x 7 spring bush PT70 spring bush PT60 spring bush LA8 spring bush LA9 sleeve 9 x. x 9 sleeve 9 x x 70 spring bush kit shock bush kit rear OMEB78 OMESB79 OMESB80 OMESB8 OMESB8 OMESB8 OMESB8 OMESB8 steering damper bush kit spring bush PT08 spring bush PTA spring bush PT0 spring bush PT sleeve 9 x x 68 spring bush PT0 spring bush PT sleeve x 8 x 70 spring bush PT8 spring bush PT spring bush PT sleeve x 7 x 68 spring bush PT9 spring bush PT9 spring bush PT6 sleeve x 6 x 80 spring bush PT7 spring bush PT8 sleeve 0 x x 86 spring bush PT70 spring bush PT7 Pin 0 x 60mm steering stabiliser mount LandCruiser F/HJ, 7 LWB models - OME spring Holden / Isuzu Rodeo tonne rear spring to suit OE & OME springs Nissan Navara tonne rear spring to suit OE & OME springs Mazda / Ford Tonne x 987 on rear spring OME only Mitsubishi Challenger / Montero rear spring to suit OME9 only Toyota LandCruiser 79 Series cab chassis & utility model only suit OME springs only Toyota LandCruiser 78 & 79 Series must be used with OME springs & greasable shackle kit only OMESB86 spring bush PT7 Toyota LandCruiser 76 & 78 Series OMESB87 OMESB88 OMESB89 OMESB90 OMESB9 spring bush PT8 spring bush PT9 sleeve 0 x x 86 spring bush PT07 spring bush PT0 spring bush PT sleeve 9 x x 7 spring bush PT spring bush PT Qty 6 To Fit Toyota HiLux IFS extra cab & SR dual cab models being fitted with OME8 series spring Jeep Wrangler - front & rear to suit OE shackles Nissan Patrol GQ leaf spring cab chassis OME spring - rear Land Rover Series III 88" & 09" spring & shackle bushes OE replacement - front Land Rover series III 88" & 09" spring & shackle bushes OE replacement - rear Land Rover Series III 88" & 09" lower shock bush - Rear suit OME springs with OE shackles. Jeep YJ Wrangler front and rear Use only with greasable shackle OMEGS Toyota Tacoma rear shackle bushes only Use with OME springs & OMEGS greasable shackles. spring bush PT spring bush PT sleeve 8 x x 69 spring bush PT spring bush PT8 spring bush PT0 spring bush PT spring bush PT6 Toyota Tacoma rear shackle bushes for OEM shackles Holden/Isuzu Jackaroo Trooper 98-9 rear OME spring Nissan Navara D model - rear spring to suit OE & OME springs. When remaining stock is exhausted no further product will be available. cont. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK / STRUT BUSH Kit No. OMESB9 (cont.) Component Description sleeve x 8 x 70 Qty To Fit Nissan Navara D model - rear spring to suit OE & OME springs OMESB9 OMESB9 OMESB96 OMESB97 OMESB98 spring bush PT60 spring bush PT7 spring bush PT6 spring bush PT spring bush PT spring bush PT spring bush PT8 spring bush PT spring bush PT sleeve 9 x x 7 spring bush PT8 spring bush PT9 spring bush PT sleeve 9 x x 7 Toyota LandCruiser HZJ7 & HZJ7 Nissan D0 Navara suits OE shackle kit only Nissan D0 Navara suits OME greasable shackle kit only Mazda BT0 / Ford Ranger 006 on Toyota HiLux 00 on to suit OE & OME springs. Holden Colorado on / Izusu DMAX on suits OME Greasable Shackle, OMEGS. OMESB99 spring bush PT8 Nissan Navara D0 spring bush PT6 suits original shackle kit only. spring bush PT sleeve 8 x x 69 OMESB00 spring bush PT8 Nissan Navara D0 spring bush PT suits OME greasable shackle kit: OMEGS spring bush PT sleeve 8 x x 69 OMESB0 spring bush PT9 spring bush PT7 Toyota LandCruiser 79 Series suits original shackle & pin from 07/009 on OMESB0 spring bush PT0 Ford Ranger PX 0 on / Mazda BT-0 0 on suits spring bush PT OE shackle spring bush PT6 sleeve 9 x x 7 OMESB0 spring bush PT Ford Ranger PX 0 on / Mazda BT-0 0 on suits spring bush PT OME greasable shackle kit OMEGS0 spring bush PT8 sleeve 9 x x 7 OMESB0 bush leaf spring VW-007 Volkswagen Amarok bush leaf spring VW-008 OMESB0 spring bush PT Nissan Navara D suits OME greasable shackle spring bush PT sleeve x 8 x 70 OMESB06 spring bush PT7 Toyota Tundra suits OME greasable shackle spring bush PT8 spring bush PT sleeve 9 x x 7 OMESB07 spring bush PT Holden Colorado / Isuzu DMAX suits OE shackle spring bush PT7 spring bush PT8 sleeve 9 x x 7 OMESB08 spring bush PT Toyota Tacoma 06 On / Tacoma V6 0 to sleeve 9 x x 7 suits OE shackle OMESB09 spring bush PT Ford F0, F0 0 To 07 sleeve 6 x 0 x 89 F0, F0 008 To 00 sleeve 6 x 6 x 89 OMESB spring bush PT spring bush PT9 spring bush PT sleeve 9 x x 78 Mitsubishi Triton MQ OMESB spring bush PT6 spring bush PT8 sleeve 8 x x 69. When remaining stock is exhausted no further product will be available. cont. Nissan Navara NP00 suits OE shackles Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A APPLICATIONS - SPECIFICATIONS - BUSH KITS NUMERICAL SPRING & SHOCK / STRUT BUSH Kit No. Component Description Qty OMESB OME0 OME spring bush PT spring bush PT8 Sleeve 8 x x 69 upper bush 0A lower bush 00B crush tube F00 upper bush 677 lower bush 678 washer w7 F8 6 x 0. x 6 OME upper bush 6809A- lower bush 680- washer w7 OME upper bush 68 lower bush 68 washer w7 OME upper bush 680 lower bush 680 washer w7 OME upper bush 6868 lower bush 6869 washer w7 crush tube F8 OME9 upper bush 6796 lower bush 6796 washer w7 crush tube F00 To Fit Nissan Navara NP00 suits OME greasable shackle Mitsubishi Pajero 000 on Mitsubishi Triton ML / Triton MN / Challenger 00 on Toyota Landcruiser 00 Series Toyota HiLux 0 on / Prado 0 / Prado 0 / FJ Cruiser / Fortuner / Runner / Tacoma Holden Trailblazer 07 on / Colorado 7 0 to 06 /Colorado 0 on / Isuzu DMAX 0 on / MU-X0 on Ford Ranger PX 0 on / Mazda BT-0 0 on Nissan Navara D0 00 on, Pathfinder R 00 to 0, Xterra 00 on Suzuki Equator Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - BUSH KITS OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS Dimensions Part No. D D d T L Number of Splines PT9.0.9.0..0 9 PT0 PT.0 6.0.9 0.0.0 8.0.0.6.0 0.0 9 9 PT0 6.0 0.0 8.0.0 8.0 9 PT60.0.0 8.0..0 PT6 PT70.0 0.0.0 0.0.0 8.0.0..0.0 9 PT80.0.7 8.0..0 PT8.0.7 8.0. 0.0 PT8.0 0.0 8.0. 0.0 PT8.0.7 8.0.8 8. PT8.7 None.0 None 60.0 0 PT90.0. 8.0..0 PT9 0.0 8.0 6.0.0.0 9 PT9 0.0 7. 6.0..0 9 PT0 0.0 0.0 6.0 6.9.0 PT0 0.0 0.0.0..0 9 PT0.0 0.0 9.0.0 0.0 9 PT0.0. 9.0..0 0 PT06.0. 8. 6.0 0.0 9 PT07 0.0 7.6 8. 6.0 0.0 0 PT09 0.0 0.0 8.0.0 0. 0 PT0.0.6 0..0 0.0 0 PT.0 0.0.. 0.0 9 PT.0.0 8.0. 0.0 0 PT 0.0.7..0 0.0 9 PT6.0...0.0 0 PT7.0 9.8 8.0 6.0. 9 PT8.0 9.8 0.0 8.0. 9 PT9.0 0.0 8.0 9.. 9 PT0.0.8 8.0 6.. 9 PT.0.8 8.0..7 9 PT 0.0.0 8.0.0. 9 PT 0.0 0.0 8.0.. 9 PT.0.0 9.0.0 0.0 9 PT.0.0 9.0.0. 9 PT6.0.0 0..0 0.0 9 PT7.0 9.8 8.0 8.0. 9 PT8 9.0 0.0 9.0.0 0.0 9 PT9 9.0 0.0 9.0.0. 9 PT0.0 9. 9.0 6.0 0.0 9 PT.0.0 0..0. 9 PT.0 9.9 9.0 6.0 0.0 9 PT.0.0 8.0. 9.0 9 PT6.0.0 0.0.0 9.0 9 PT7 8.0 0.0 8.0.0 0.0 9 PT8 8.0 0.0 8.0.0.0 9 PT 0.0.0 6.0 6.0 8.0 9 PT.0 9.9 9.0 9. 9.0 9 Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. Contains Vehicle Position Refer to: FK0 6 x Flat Washer Toyota LC 60 Series Front Manual Sec. GFI - Front suspension installation FK0 x Saddle Correction Plate Toyota HiLux Petrol Front Manual Sec. GFI - Front suspension installation FK0 x Retainer Spacer mm Toyota LC 60 Series Rear Manual Sec. GFI FK08 x Retainer Spacer 8mm Toyota LC 60 Series Rear Manual Sec. GFI FK0 x Retainer Spacer mm Toyota LC 60 Series Rear Manual Sec. GFI - Rear suspension installation FK07 x Retainer Spacer 7mm Toyota LC 60 Series Rear Manual Sec. GFI - Rear suspension installation FK06 x Stabiliser Bar Packer mm Suzuki Front Manual Sec. GFI - Front suspension installation FK08 x Anti-Inversion Plate Toyota LC 60, 7 Series Front & Rear Manual Sec. 8 Technical - Shackle Modification All 0 & 70 Series, Nissan GQ Patrol, Ford Maverick ute & c/c FK09 x Anti-Inversion Plate Toyota HiLux all models Rear Manual Sec. 8 Technical - Shackle Modification FK0 x Short Gussett Plate Toyota HiLux all models Front Manual Sec. 8 Technical - HiLux Front Springs x Long Gussett Plate FK x Anti-Inversion Side Plate Toyota HiLux all models Rear Manual Sec. GFI FK x Anti-Inversion Plate Isuzu Tonne P/Up Rear Fitting instructions supplied with kit FK x Anti-Inversion Side Plate HiLux 997 to 00 Rear Fitting instructions supplied with kit FK6 x 0mm Bump Stop Spacer Jeep Wrangler TJ Rear Fitting instructions supplied with kit FK8 x Bracket x Bolt Nissan GU Patrol Rear Sway Bar Fitting instructions supplied with kit x Washer x Nut FK9 x Spacer Plate x mm Bolt LandCruiser 70S DC, 76S Wagon, 78S & 79S Front Sway Bar Fitting instructions supplied with kit x Spring Washer SC Models FK0 6 x Spacer Plate 8 x Bolt M8 x. x mm 8 x Flat Washer Land Rover Discovery 999 on Models Front Cross Member Fitting instructions supplied with kit FK x Bracket x Bolt M8 x Flat Washer Toyota Tacoma V6 & cylinder 998 to 00 Rear Exhaust Bracket x Hex Nut FK x Shock Tower Support Mazda / Ford Front Fitting instructions x Captive Nut tonne pickup x Bolt M0 x. x 0mm x Flat Washer x Spring Washer FK x Strut Adaptor Toyota RAV Front Fitting instructions 998 to 000 FK x Bracket 6 x Bolt Nissan Y6 Patrol with stabiliser Rear Sway Bar Fitting instructions x Flat Washer bar release 6 x Nut Nyloc FK x Spacer Block Nissan Y6 Patrol Front Fitting instructions x Bolt Oil Pan Kit x Flat Washer x Spring Washer FK6 x Side Plate Isuzu DMAX & Holden Rear Fitting instructions supplied with kit Colorado RC 08 to Holden Rodeo 0 to 08 FK7 x Support Bracket Toyota LandCruiser 00 Series IFS Torsion Bar Locating Bracket Fitting instructions supplied with kit FK8 x Spacer Suzuki XL7 Front Fitting instructions supplied with kit x Stud FK9 x Spacer x Bolt M0 x. x mm Toyota Fortuner 0 on Toyota Tacoma 06 on Rear Drive Shaft Fitting Instructions x Flat Washer M0 x mm Toyota Tacoma V6 x Spring Washer M0 x /8 00 to 0. When remaining stock is exhausted no further product will be available. cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SUSPENSION FITTING KITS Part No. FK0 FK FK FK FK FK FK6 FK7 FK8 FK9 FK0 FK FK SPECIFICATIONS - FITTING KITS Contains x Anti-Inversion Bracket x Bracket 6 x Bolt x Nut x M0 x Nut x M0 Caged. 6 x Spring Washer 0 x Flat Washer Vehicle Mitsubishi Ford F0, F0 999 to 00 Dual Cab Models Position Rear Rear Refer to: Fitting Instructions Fitting instructions x 99908 Bracket Toyota Tundra 007 on Front Fitting instructions x 99909 Kit x Bolt M8 x. x 0 x Hex Nyloc Nut x Flat Washer Spring Bush Installation Tool Volkswagen VK Amarok Front Fitting Instructions x Bracket Toyota LandCruiser Rear Sway Fitting Instructions 78 Series Bar Mounts x Spacer Ford F0, F0 Rear Fitting Instructions x Bolt 999 to 00 x Nut Xtra Cab x Washer x Bracket Ford F0 Front Fitting instructions supplied with kit 8 x Bolt M8 x. x 0 00 to 008 8 x Nut M8 x. 6 x Washer x Bracket Jeep Wrangler JK LHD Rear Fitting instructions supplied with kit x Bump Stop Spacer x Extension Plate x Packer x Bolt M x. x Nut M x. 8 x Washer x Bolt M x. x Nut M x. x Bolt M8 x. x 0 x Flanged Nuts M8 x. x Anti-Inversion Plate Toyota LandCruiser Rear Fitting instructions supplied with kit 76 Series x Bracket Jeep Wrangler JK RHD Rear Fitting instructions supplied with kit x Bump Stop Spacer x Extension Plate x Packer x Bolt M x. x Nut M x. 8 x Washer x Bolt M x. x Nut M x. x Bolt M8 x. x 0 x Flanged Nut M8 x. x Bump Stop Spacer Jeep Wrangler JK Front & Rear Fitting instructions supplied with kit x Bolt M0 x. x 7 x Bolt M8 x. x 70 x Washer x Flanged Nut x Nut Nyloc x Bracket Nissan GU Patrol - Leaf Rear Fitting instructions supplied with kit Assembly Bump Sprung Stop Spacer x Sway Bar Packer Nissan Xterra 00 on Rear Fitting instructions supplied with kit x Bolt M0 x. x x Flat Washer M0 x Spring Washer M0 cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Part No. Contains Vehicle Position Refer to: FK x Backing Plate Nissan Y6 Patrol - Leaf Rear Fitting instructions supplied with kit x Backing Plate Wear Clip Sprung x Bolt M8 x. x Nyloc Hex Lock Nut x Tube Spacer FK x Saddle Bracket Toyota LandCruiser Rear Fitting instructions supplied with kit x HD Bar Bracket ( x RH, x LH) 0 x Flat Washer M8 x 7 76/78/79 Series 0 x Bolt M8 x. x 0 x M8 Spring Washer FK x Axle Mount Bracket ( x RH, x LH) Toyota LandCruiser Rear Fitting instructions supplied with kit x OMEU7 U Bolt x OMEU7 U Bolt 76/78/79 Series x Saddle Bracket x Brake Line Bracket x Dropper Bracket ( x RH, x LH) x Spacer Wing Mount x Grub Screw M0 x. x 0 x M0 Flat Washer x Nut Flange M0 x. 9 x Flat Washer M8 x 7 9 x BZ Bolt M8 x. x 9 x Spring Washer M8 x / x / FK6 x Front Brake Line Bracket ( x RH, x LH) x Rear Brake Line Bracket ( x RH, x LH) Jeep Wrangler JK Front Rear x Hand Brake Bracket 6 x Bolt M6 x.0 x 0 8.8BZ 0 x Washer M6 x 0 6G x Nyloc Nut M6 x x Spring Washer M6 x. x.6 x Caged Nut M6.7 -. FK7 x Track Bar Bracket Jeep Wrangler JK LHD Rear x Track Bracket Spacer x U Bolt x Bolt M x.px80 x Spacing Washer M x. x mm x Nyloc Nut M x. FK7RHD x Track Bar Bracket Jeep Wrangler JK RHD Rear x Track Bar Bracket Spacer x U Bolt x Bolt M x.px80 x Spacing Washer M x. x mm x Nyloc Nut M x. FK8 x Front Sway Bar Link x Rear Sway Bar Link Jeep Wrangler JK Front Rear x Dis-connect Pin x Park Pin x Sway Bar Bracket ( x RH, x LH) x R-clip.0 TZP x Bolt 7/6 x / GR x Flat Washer 7/6 x Spring Washer 7/6 x / x / x Nut 7/6 x Nyloc Nut M x Nyloc Nut M0 x. x Flat Washer / x /8 x mm x Flat Washer M0 x 0.6 x mm Fitting Grease FK9 8 x Driveline Packer Jeep Wrangler JK Front x Crossmember Spacer Rear. When remaining stock is exhausted no further product will be available. cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Part No. FK9 (cont.) FK0 FK SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Contains Vehicle Position Refer to: x Flange Bolt M x. x 0 GR0.9 Jeep Wrangler JK Front x Flange Bolt M x. x 0 GR0.9 Rear x Flange Nut Conelock M x. Class 0 x Bolt M x. x 0mm 8.8 x Flat Washer / x /8 x mm x Spring Washer / x /6 x /8 x Cable Tie.8 x 00mm x Stabiliser Plate Jeep Wrangler JK Front Fitting instructions supplied with kit x Stabiliser Spacer x Bolt M0 x. x 8.8 x Flat Washer M0 x 0.6 x mm x Flange Nut M0 x. FP x Brake Proportioning Bracket Toyota LandCruiser 70S Rear Fitting instructions supplied with kit x Flange Nut M8 x. BZ DC / 76S Wagon / 78S / x Flat Washer M8 x 7 x. 79S SC x Bolt M8 x.px0 FK x Driveline Packer Jeep Wrangler JK Front Fitting instructions supplied with kit x Flange Bolt M x. x 0 GR0.9 x Flange Nut Conelock M x. Class 0 FK6 x Packer Strut mm Ford Everest on / Front Fitting instructions supplied with kit PXII on / PX to Mazda BT-0 on FK7 FK8 FK9 FK6 FK6 FK6 x Flat Washer M x x x Spring Washer M x mm x mm Ford Ranger 0 on Mazda BT-0 0 on Centre Bearing Fitting instructions supplied with kit x Female Bolt M0 x x. 8.8 x Brake Proportioning Bracket Toyota LandCruiser 70S Rear Fitting instructions supplied with kit x Flange Nut M8 x. BZ DC / 76S Wagon / 78S / x Flat Washer M8 x 7 x. 79S SC x Bolt M8 x.px0.6 x spring Washer M8 x / x / x Brake Prop Bracket Toyota HiLux 0 to Rear Fitting instructions supplied with kit x Bolt M8 x.px0 8.8 x Hex Lock M8 x. x Flat Washer M8 x 7 x.6 x Spring Washer M8 x / x / x Rear Panhard Bracket Jeep Wrangler JK " Rear Fitting instructions supplied with kit x Spacer Bracket RHD x U Bolt x M x. x 80 Bolt x M x. Nyloc Nut x M x. x mm Spacing Washer x Bump Spacer Bracket x M8 x. x 0 Hex Bolt x M8 x. Nut Flange x M8 x 7 x.6 Flat Washer x Front Bracket Land Rover Defender Front Fitting instructions supplied with kit x Rear Bracket Rear x M8 x. Bolt 8 x M8 x 7 Flat Washer 8 x M8 Nut Flange x M8 x. x 0 Bolt x Front Bracket Land Rover Defender Front Fitting instructions supplied with kit x Rear Bracket Rear 6 x M8 x. x Bolt 6 x M8 x 7 Flat Washer 6 x M8 Nut Flange 8 x M0 Screw Hex 8 x M0 Flat Washer 8 x M0 Nut Flange cont. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Part No. FK6 FK6 FK66 FK68 FK69 FK70 FK7 FK7 FK7 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Contains Vehicle Position Refer to: x LH Bracket Land Rover Defender Rear Fitting instructions supplied with kit x RH Bracket x LH Bracket Toyota LandCruiser 70 Front Brakes Fitting instructions supplied with kit x RH Bracket Series x M8 Caged Nut x Bolt M8 x 6 x. x Flat Washer M8 x 7 x Spring Washer M8 x Bracket Leaf Cable Isuzu DMAX CC & LSM Rear Fitting instructions supplied with kit x Hex HD Bolt M8 x 6 x. Models x Hex Lock Nut Nyloc M8 x. x Flat Washer M8 x 7 x.6 ZP x Front Sway Bar Link Jeep Wrangler JK Front x Dis-Connect Pin x Park Pin x RH Sway Bar Bracket x Sway Bar Bracket x R-Clip.0 Tzp x Bolt 7/6 x / GR x Flat Washer 7/6 x Spring Washer 7/6 x / x / x Nut 7/6 x Nut Nyloc M x Nut Nyloc M0 x. x Flat Washer / x /8 x mm x Flat Washer M0 x 0.6 x mm Fitting Grease x Bracket Panhard Superduty Ford F0/F0 08 to 7 Front Fitting instructions supplied with kit x Bracket RAD ARM GEN Superduty R Ford F0, F0 0 to Front Fitting instructions supplied with kit x Bracket RAD ARM GEN Superduty L 07 x Bolt Hex M8. x 0 GR0.9 x Nut Nyloc M8. GR0.9 8 x Washer Flat / Zinc x Bolt M x.7 x MMZP x M.7 Nyloc x M Spring Washer x M Flat Washer x Bracket Brakeline Superduty R Ford F0, F0 008 to Front Fitting instructions supplied with kit x Bracket Brakeline Superduty L 07 x Plate ESC Outside Superduty x Plate ESC Inside Superduty x Bracket ESC Top Superduty x Bolt HXHD M6 x.0 x GR8.8 BTZP80 x Nut Hex Nyloc M6 x.0 GR8.8 BTZP80 8 x Washer F M6 x 6 x. PTZP80 x Bolt M8 x. x 70 CUP SQU BLKZP x Nut Hex Nyloc M8 x. GR8.8 BTZP80 x Nut M0 Caged -B x M0. x 0 ZP x M0 Spring Washer x M0 Flat Washer x Bracket Sway Bar Superduty Ford F0, F0 008 to Front Fitting instructions supplied with kit x Bolt M x.7 x MMZP 07 x M x.7 Nyloc Nut x Washer Spring / 8 x M Flat Washer x Spacer Bump Front Superduty Ford F0, F0 008 to Front Fitting instructions supplied with kit x M8. x 0 GR8.8 07 x M8 Flat Washer x M8 Spring Washer cont. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Part No. FK7 FK76 FK77 FK78 FK79 FK80 FK8 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Contains Vehicle Position Refer to: x Packer Trim 0mm F Superduty Ford F0/F0 08 to 7 Front x Saddle Bracket Toyota LandCruiser 70S Rear Fitting instructions supplied with kit x HD Bar Bracket ( x RH, x LH) DC / 76S Wagon / 78S / 0 x Flat Washer M8 x 7 79S SC 0 x Bolt M8 x. x 0 x M8 Spring Washer x Axle Mount Bracket ( x RH, x LH) Toyota LandCruiser 70S Rear Fitting instructions supplied with kit x OMEU7 U Bolt DC / 76S Wagon / 78S / x OMEU7 U Bolt 79S SC x Saddle Bracket x Brake Line Bracket x Dropper Bracket ( x RH, x LH) x Spacer Wing Mount x Grub Screw M0 x. x 0 x M0 Flat Washer x Nut Flange M0 x. 9 x Flat Washer M8 x 7 9 x BZ Bolt M8 x. x 9 x Spring Washer M8 x / x / x Bracket Nissan GU Cab Chassis Rear Fitting instructions supplied with kit x Strut Packer Jeep WK Front x Bracket RAD ARM GEN Superduty R Ford F0, F0 008 to Front Fitting instructions supplied with kit x Bracket RAD ARM GEN Superduty L 00 x Bolt Hex M8. x 0 GR0.9 x Nut Nyloc M8. GR0.9 8 x Washer Flat / Zinc x Bolt M x.7 x MMZP x M.7 Nyloc x M Spring Washer x M Flat Washer x Caster Plate L Ford F0, F0 008 to Front Fitting Instructions x Caster Plate R 07 x M8 x.p x 0 x Hex Nut Nylon 8 x M8 Flatwasher x Nylon Nut M8 x / Flat Washer FK8 x Brake Line Drop Bkt x M8 x.p x 0 Toyota LandCruiser 70S DC / 76S Wagon / 78S / Rear Brake Line Fitting Instructions x Hex Nut Nylon 79S SC x Flat Washer M8 x 7 x M8 Spring Washer x M8 Caged Nut FK8 x Bump Spare Plate Nissan Navara NP00 Rear Leaf Spring Fitting Instructions FK8 x Plate Packer Nissan Navara NP00 Front Strut FK8 x Sway Bar Brackets Nissan Navara NP00 Rear Fitting Instructions x Pot Bracket x M x.7 x 0 Bolt x Washer M x 7 x mm x M x.7 Nyloc Nut x M8 x. x 0 Bolt x Washer M8 x 7 x.6m FK86 x Extension Bracket Toyota HiLux 0 on Rear Spring Fitting Instructions x Bolt M6 x 0 x M6 Spring Washer x Washer M6 x.6 x 0 FK87 x Bolt M8 x. x HD TZP80 Holden Colorado Rear Leaf Fitting instructions supplied with kit x Bracket Colorado Brake Line x Bracket Colorado Brake Line Spring cont. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Part No. Contains Vehicle Position Refer to: FK87 (cont.) x Nut Hex Lock Nyloc M8 x. Holden Colorado Rear Leaf Fitting instructions supplied with kit x Bolt M8 x. x 6 Hex HD TZP80 8 x Washer Flat M8 x 0 x Black Spring FK89 x Spacer Cross Member Jeep Wrangler JK Cross Member Fitting Instructions x Bolt M x. x 0mm Class 8.8 ZP Spacer Kit x Washer Flat / x, /8 x mm ZP x Washer Spring / x / 6 x /8 ZP FKWTJ0 x mm Panhard Rod Extended Jeep Wrangler TJ Rear Fitting instructions supplied with kit FKWTJ0 Mounting Bracket Jeep Wrangler TJ Rear x Spacer Washer x Bolt M x. x 0mm 6 x Flat Washer x Spring Washer x Nut M x. GQGK0 x Spacer Plate 8 x Hex. Bolt Nissan GQ Patrol Ford Maverick Gearbox Cross Member Manual Sec. GFI Patrol Gearbox Spacer Kit 8 x Flat Washer 8 x Spring Washer GQGK0 x Spacer Plate Nissan Y6 Patrol SWB Gearbox Fitting instructions 9 x Spacer mm 8 x Bolt M x. x 70mm 7 x Spring Washer 7 x Flat Washer 6 x Bolt M8 x. x 0mm x Bolts M8 x. x mm JWGK0 6 x Spacer Plate Jeep Wrangler to 00 Gearbox Fitting instructions supplied with kit 6 x Bolt Spacer 6 x " Bolt JWGK0 6 x Spacer Plate Jeep Wrangler TJ 00 Gearbox Fitting instructions 6 x Bolt Manual Models 7 x Flat Washer 7 x Spring Washer JWGK0 8 x Spacer Plate Jeep Wrangler TJ 00 Gearbox Fitting instructions 8 x Bolt Auto Models 8 x Flat Washer 8 x Spring Washer OMETH00 x Bearing Plate x Rubber Isolator x Loose Rubber Bushes Mitsubishi Challenger 00 on Mitsubishi Triton ML Front One side only on ML x Dome Washer Mitsubishi Triton MN x Cupped Washer Mitsubishi Triton MQ x Crush Tube x Mounting Nuts M0 x. Dirt Shield Included OMETH00 x Bearing Plate With Bonded Lower Bush Toyota Runner (USA) Front x Rubber Isolateor 0 on Toyota FJ Cruiser 06 on x Bonded Rubber Bushes (One On Washer Toyota Fortuner 0 on One side only One On Bearing Plate) Toyota HiLux 0 on on HiLux 0 x Loose Washer Toyota Prado 0 Series On x Bonded Washer (One On Rubber Bush) Toyota Prado 0 Series x Mounting Nuts M0 x. Toyota Tacoma 0 on OMETH00 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS x Bearing Plate With Bonded Lower Bush x Rubber Isolator x Bonded Rubber Bushes (One On Washer One On Bearing Plate) x Loose Washer x Bonded Washer (One On Rubber Bush) x Mounting Nuts M0 x. Toyota LandCruiser 00 Series Front One side only 00 Series cont. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Part No. OMETH00 OMETH00 OMETH006 OMETH007 XJGK0 SPECIFICATIONS - FITTING KITS SUSPENSION FITTING KITS Contains x Bearing Plate With Bonded Lower Bush x Rubber Isolator x Bonded Rubber Bushes (One On Washer One On Bearing Plate) x Loose Washer x Bonded Washer (One On Rubber Bush) x Mounting Nuts M0 x.0 x Bearing Plate x Rubber Isolator & Bush Combined x Loose Rubber Bush x Cupped Washers Sized Differently x Crush Tube x Mounting Nuts M0 x.0 x Bearing Plate x Rubber Isolator x Loose Rubber Bushes x Cupped Washers x Crush Tube x Mounting Nuts M x.7 x Bearing Plate x Rubber Isolator x Loose Rubber Bushes x Dome Washer x Cupped Washer x Crush Tube x Mounting Nuts M0 x. x 0mm Packer x 6mm Packer x M0 x. x 0 8.8 Bolt x /8 x / Flat Washer x M0 Spring Washer x mm Spacer x M8 x. x 0 8.8 Bolt x M8 x 7 Flat Washer x M8 Spring Washer Vehicle Holden Trailblazer 07 on/colorado 7 0 to 06/Colorado 0 on Isuzu DMAX 0 on / MU-X 0 on Nissan Navara D0 00 on Nissan Pathfinder R 00 to 0 Ford Ranger 0 on Mazda BT-0 0 on Mitsubishi Pajero NM 000 on Jeep Cherokee XJ Wagon 98 on Position Refer to: Front One side only Front One side only D0 Front One side only One side only Front One side only Gearbox Fitting instructions supplied with kit Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - LEAF SPRINGS ADDING AN EXTRA LEAF Part No. Required Centre Bolt To Suit Spring No. DXL UCB CS00F & CS00F DXL UCB CS00RA/B & CS00RA/B & CS07RA/B DXL UCB8 CS00F & CS00F DXL UCB8 CS00R & CS00R DXL UCB6 CS009R & CS00R D6XL UCB6 CS09R & CS00R & CS0R D7XL UCB CS00R & CS0R D8XL UCB CS00R D9XL UCB7 CS06R & CS07R D0XL UCB CS0R DXL UCB CS00FA/B DXL UCB CS0R & CS0R DXL UCB CS0R & CS0R & CS0R & CS07R & CS0R- DXL UCB7 / UCB CS0R & CS0R & CS0R & CS066R DXL UCB CS06RA/B D6XL UCB CS006F D7XL UCB7 CS008FA/B D8XL UCB CS00R & CS0R & *CS0R D9XL UCB6 CS08R & CS09R D0XL UCB7 CS0FA/B & CS0FA/B DXL UCB7 CS08R & CS09R DXL UCB8 CS0RA/B & CS0RA/B & CS0RA/B DXL UCB09 CS0F DXL UCB09 CS06R & CS07R DXL UCB CS006R & CS007R & CS008R D6XL UCB CS06R & CS06R D7XL UCB0 CS08R D8XL - CS0R D9XL UCB7 CS07R D0XL UCB7 CS06F DXL UCB9 CS0R & CSR DXL UCB0 CS0R & CS0R & CS0R DXL DXL UCB9 UCB7 CS09R & CS06R & CS060R & CS068R & CS069R CS07R & CS08R & CS070R D6XL - CS09R D7XL - CS06R D8XL UCB7 CS06R & CS06R DXL - CS06RA & CS06RB ELXL - EL0R & EL0R & EL0R & EL07R ELXL - EL0R & EL0R & EL0R & EL066R & EL079R & EL080R & EL08R & EL08R ELXL - EL09R & EL068R & EL069R EL9XL - EL07R & EL07R & EL07R EL0XL UCB EL077R ELXL - EL08R & EL08R & EL08R ELXL - EL086R ELXL UCB9 EL089R & EL090R & EL09R EL6XL UCB7 EL09R & EL096R TSXL0 UCB0 CS08R * FK0 U Bolt Thread Spacer Kit required on all Cab Chassis Models.. When remaining stock is exhausted no further product will be available. Contents!A REMOVING A LEAF: In general terms, to reduce a springs rate remove the third leaf from the top of the spring. Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - LEAF SPRINGS REPLACEMENT MAIN & SECOND LEAF CS00F, CS00F 0 SERIES - OME, OME SLF/ SLF/ CS00F, CS00F, CS00F 60 SERIES - OME0, OME, OME SLF/ SLF/ CS006F, CS007F 7 SERIES - OME67, OME67 SL6F/ SL6F/ CS008FA HILUX - OME99A SL8FA/ SL8FA/ CS008FB HILUX - OME99B SL8FB/ SL8FB/ CS009FA HILUX - OME9A SL9FA/ SL9FA/ CS009FB HILUX - OME9B SL9FB/ SL9FB/ CS00FA, CS0FA PATROL M60 - OMEA, OMEA SL0FA/ SL0FA/ CS00FB, CS0FB PATROL M60 - OMEB, OMEB SL0FB/ SL0FB/ CS0FA, CS0FA SUZUKI SIERRA - OMESA SLFA/ SLFA/ CS0FB, CS0FB SUZUKI SIERRA - OMESB SLFB/ SLFB/ CS0F JEEP YJ - OMEJF SLF/ SLF/ SPRINGS CS00R, CS00R 0 SERIES - OME, OME SLR/ SLR/ CS00R SERIES - OME0 SLR/ SLR/ CS00RA, CS00RA 60 SERIES - OMEA, OMEA SLRA/ SLRA/ CS00RB, CS00RB 60 SERIES - OMEB, OMEB SLRB/ SLRB/ CS006R, CS007R, CS008R 7 SERIES - OME9, OME9, OME9, OME9 SL6R/ SL6R/ CS009R, CS00R HILUX - OME7, OME7, OME7 SL9R/ SL9R/ CS0R, CS0R PATROL M60 - OME, OME SLR/ SLR/ CS0R, CS0R, CS0R 78/79 SERIES - OME9, OME9, OME9, OME9 SLR/ SLR/ CS06RA PATROL Y60, Y6 CAB CHASSIS - OME6A, OME6A SL6RA/ SL6RA/ CS06RB PATROL Y60, Y6 CAB CHASSIS - OME6B, OME6B SL6RB/ SL6RB/ CS07RA HJ60 - OMEA SL7RA/ SL7RA/ CS07RB HJ60 - OMEB SL7RB/ SL7RB/ CS08R, CS09R, CS00R, CS0R CS0R, CS0R HILUX - OME80, OME8, OME8, OME8 TRITON / PAJERO - OME, OME SL8R/ SLR/ SL8R/ SLR/ CS06R, CS06R ISUZU / RODEO 00 - OMEROD, OMEROD SLR/ SLR/ CS06R, CS07R MAZDA / FORD UTE - OME6, OME6 SL6R/ SL6R/ CS08R, CS09R ISUZU / RODEO - OMEROD, OMEROD, OMEROD SL8R/ SL8R/ CS00R, CS0R, CS0R CS0RA NAVARA D, D - OMENN, OMENN, OMENN JEEP XJ - 7mm SL0R/ SLRA/ SL0R/ DXL CS0RB CS0RA, CS0RA JEEP XJ - 7mm JEEP XJ - OMEJCA, OMEJCA SLRB/ SLRA/ DXL SLRA/ CS0RB, CS0RB JEEP XJ - OMEJCB, OMEJCB SLRB/ SLRB/ CS06R, CS07R JEEP YJ - OMEJR, OMEJR SL6R/ SL6R/ CS08R, CS09R SUZUKI SIERRA - OMES, OMES SL8R/ SL8R/ CS0R, CS0R, CS0R, CS07R HILUX 00 TO 0 SLR/ SLR/ CS09R, CS06R, CS060R RANGER / BT-0 /006 TO 0 SL9R/ SL9R/ CS0R, CS0R TRITON ML & MN 006 TO 0 SLR/ SLR/ CS06R COLORADO, DMAX 008 TO 0, RODEO 00 TO 008 SL6R/ SL6R/ CS06R COLORADO, DMAX 008 TO 0, RODEO 00 TO 008 SL6R/ SL6R/ CS06R, CS06R AMAROK 00 ON SL6R/ SL6R/ CS066R 78/79 SERIES SLR/ SL66R/ CS068R, CS069R RANGER / BT-0 0 ON SL9R/ SL9R/ CS0R, CSR NAVARA D0 SL0R/ DXL. When remaining stock is exhausted no further product will be available. OME SPRING SPRINGS MAIN LEAF SECOND LEAF Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - LEAF SPRINGS U BOLTS OE spring stack height must be compared to OME spring before final U Bolt selection as OE spring stack heights may vary from model to model. PART NO. A B C D E LEG LEG THREAD THREAD THREAD TOP REC. REC. LENGTH CENTRE DIA LENGTH PITCH TYPE TORQUE TORQUE mm mm mm mm Lbs.ft. Nm OMEU 0 8 70. SQUARE 9 6 OMEU 00 76 7. FLAT 9 6 OMEU 68 7 70. SQUARE 9 6 OMEUA 8 7 6. SQUARE 9 6 OMEUB 00 7 70. SQUARE 9 6 OMEU 7 8 70. ROUND 8 79 OMEU 8 97 70. SQUARE 9 6 OMEU6 00 7 0. SQUARE 8 79 OMEU7 90 88 70. ROUND 8 79 OMEU8 0 0 7. ROUND 9 6 OMEU8B 0 7. ROUND 9 6 OMEU9A 97 97 7. ROUND 9 6 OMEU9B 97 7. ROUND 9 6 OMEU9C 0 97 7. ROUND 9 6 OMEU9D 97 97 90. ROUND 9 6 OMEU60 0 8 70.7 ROUND 6 OMEU6 7 87 0 60. ROUND OMEU6B 60 87 0 70. ROUND OMEU6 7 0 70. ROUND OMEU6 90 7 0. SQUARE 8 79 OMEU6 60 90. ROUND 9 6 OMEU6 97 7. ROUND 9 6 OMEU66 90 0 60. ROUND 9 6 OMEU66A 0 0 60. ROUND 9 6 OMEU66B 0 0 60. ROUND 9 6 OMEU67 0 07 6 7.0 ROUND 97 OMEU68 7 07 6 7.0 ROUND 97 OMEU69 9 6.0 ROUND 9 6 OMEU69A 60 9 6.0 ROUND 9 6 OMEU70 0 9.0 SQUARE 9 6 OMEU70A 0 9.0 SQUARE 9 6 OMEU7 0 8 60. SQUARE 8 79 OMEU7 00 97 90. ROUND 9 6 OMEU7 9 0 0. ROUND OMEU76 70 8 0. SQUARE 8 79 OMEU77 97 6 0.0 SEMI ROUND 97 OMEU78 0 97 6 0.0 SEMI ROUND 97 OMEU79 9 07 6 0.0 ROUND 97 OMEU80 80 07 6 0.0 ROUND 97 Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A REPLACEMENT CENTRE BOLTS Dimension Details Centre Bolt Head Head Shank Shank Thread Thread A B C D E UCB 7 0 90 9. 0 /8 UNF UCB 90 9. 0 /8 UNF UCB 70 9. 0 /8 UNF UCB 8 0 9. 0 /8 UNF UCB6 8 80 7.9 0 /6 UNF UCB7 7.9 /6 UNF UCB8 9 7 7.9 0 /6 UNF UCB09 0 7.9 0 /6 UNF UCB0 8 0 9. 0 /8 UNF UCB 7 0 9. 0 /8 UNF UCB 8 70 7.9 0 /6 UNF UCB 6 70 9. 0 /8 UNF UCB 6 80 9. 0 /8 UNF UCB. 9 7 7.9 0 /6 UNF UCB6 8 80 7.9 0 /6 UNF UCB7 SPECIFICATIONS - LEAF SPRINGS UCB 8 70 UCB8 6 8 0 0 0 M0 UCB9 8 9 0 UCB0 6 8 6 0 M0 UCB 8 0 0 M0. When remaining stock is exhausted no further product will be available. 9. 0 /8 UNF 8 90 9. 0 /8 UNF M0 Spring Part No. CS0R, R CS00RA/B, 7RA/B CS00F, F, F CS00R, 6R, 7R, 8R CS006F, 07F, 0FA/B, FA/B, R, R, 0R, R, R, R, R CS009R, 0R, 8R, 9R, 0R, R CS008FA/B, 9FA/B, FA/B, FA/B, 8R, 9R CS00F, F, R, R, RA/B, RA/B, RA/B CS0F, 6R, 7R CS008R, 8R, EL08R, 8R, 8R, 8R CS06RA/B CS08R CS00R, R, R CS00R, R, R, R, R-, R, R, 6RA/B, 7R CS0R, R, 6R, 6R CS08R, 9R CS0R, R, R, 6R, 7R, 7R, 7R, 8R, 6R, 6R, 66R, EL09R, 96R CS0F, 8F CS08R, 9R, 0R, R, 6R, 60R, 0R, R, EL0R, R, R, 9R, 68R, 69R, 7R, 7R, 7R, 7R, 79R, 80R, 8R, 86R, 87R, 88R, 89R, 90R, 9R CS08F EL077R With Overload Leaf Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Conten SPECIFICATIONS - LEAF SPRINGS LEAF SPRING SERVICE PARTS SPRING EYE SLEEVES BONDED RUBBER BUSHES ID OD LENGTH ID OD LENGTH (MM) (MM) (MM) (MM) (MM) (MM) CBH08 0 8 CBH0970 0 9/70 CBH769 7.. 69 CBH0607 0 60/7 CBH09 0 9 CBH7889. 78/89 CBH09 0 9 CBH87689.8 76/89 CBH69. 6. 9 CBH6689 6 6/89 CBH669. 6. 69 CBH89689 8. 9 6/89 CBH7779.7 7.7 9 CBH889 8 /89 CBH069 0 69 CBH79 7.. 9 LEAF LINER KITS CBH99 9.. 9 DESCRIPTION CBH09 0 9 IL0YE (Round) Inter Leaf Liners x 6 Pieces CBH09 0 9 SLK60 (60mm Wide) Noise - Service Liners x Pieces CBH069 0 69 SLK70 (70mm Wide) Noise - Service Liners x Pieces SLO00 Inter Leaf Liners Small (Each) SPRING CLIPS SLO00 Inter Leaf Liners Large (Each) LEAF CLIP CLIP WIDTH WIDTH LENGTH EL SERVICE KITS (MM) (MM) (MM) DESCRIPTION 07 70 0 TB00 TRU BLU NLGI.9 Grease 0gm 67 70 6 TB00 TRU BLU NLGI.9 Grease.kg TB00 TRU BLU NLGI.9 Grease 0kg RIVETS ELSK0 Leaf Spring Clip Liner Kit SIZE LENGTH ELSK0 Interleaf Liners x 0 (MM) ELSK0 Leaf Spacers.6mm 60 Wide 8 /8 ELSK0 Leaf Spacers.6mm 70 Wide 8 /8 ELSK0 Leaf Trim Packer 0mm 60 Wide ELSK06 Leaf Trim Packer 0mm 70 Wide ELSK07 Caster Wedge o 60 Wide ELSK08 Caster Wedge o 70 Wide ELSK09 Caster Wedge. o 60 Wide Page OME INT CAT. NO.8 SEPTEMBER 08

Conte SPECIFICATIONS - LEAF SPRINGS LEAF SPRING TRIM PACKERS (Mild Steel mm Thick) Part No. Width Length Hole Dia. TP0 70mm 0mm 0.mm TP0 70mm 0mm 8.7mm TP0 60mm 0mm 0.mm TP0 60mm 0mm 8.7mm TP0 0mm 0mm 8.7mm Applications TOYOTA 60, 7, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE TOYOTA 0,,, 7 NISSAN MQ, MITSUBISHI PAJERO, TRITON, L00 TOYOTA HILUX, RUNNER SUZUKI SIERRA, SAMURAI (SJ), SANTANA SAMURAI, HOLDEN DROVER To be used to correct left to right trim problems. Maximum plates (0mm). Order centre bolt separately. Refer Manual for Instructions. Conte CLIP LINER KITS FOR LEAF SPRINGS Kit Part No. Contents: Clip Liner Size & Quantity To Suit OME CLK 0mm X OME0,,, JF CLKA 0mm X, 90mm X OMEA, A CLKB 0mm X, 80mm X OMEB, B CLK 0mm X OME, CLK 0mm X, 60mm X OME, CLK7 mm X, 70mm X OME7, 7 CLK8 0mm X, 90mm X OME8, 8, 8 CLK0 0mm X, 80mm X OME0 CLK mm X, 0mm X OME, CLK 0mm X, 0mm X OMEA/B CLK 0mm X OMEA/B, A/B, JCA/B CLK9 0mm X, 80mm X OME9, 9, 9, 9 CLK 0mm X OME, CLK7 0mm X, mm X OME67, 67 CLK6 mm X, 9mm X OME6A/B, 6A/B, 6A/B CLK9 mm X, 0mm X OME9A/B, 99A/B CLKJ mm X OMEJR CLKJ 0mm X, 80mm X OMEJCA, JCB CLKNN 80mm X OMENN, NN, NN CLKROD 0mm X, 70mm X OMEROD, ROD, ROD, ROD CLKD mm X CLKD mm X, 0mm X CLK6D mm X, 9mm X OME6, 6 CLKD 0mm X, 8mm X CLK8D 0mm X, 6mm X CLK0D 60mm X CLKD mm X, mm X, 8mm X CLK8D 7mm X CLKD 0mm X, 0mm X CLK7D mm X, 0mm X CLK8D mm X, mm X. When remaining stock is exhausted no further product will be available. To Suit CS00F, F, F CS00RA, RA CS00RB, RB CS00F, F CS00R, R CS009R, 0R, 8R, 9R, R, R CS08R, 9R, 0R CS00R CS0R, R CS07RA/B CS00FA/B, FA/B, RA/B CS006R, 7R, 8R, 68R CS0R, R, 9R, 6R, 6R CS006F, 7F CS06RA/B, R, 6RA/B, 7R CS008FA/B, 9FA/B CS06R CS0RA/B CS00R, R, R CS0R, R, 6R, 6R CS0FA/B, F CS0R, R, R, 60R, 66R, 69R CS06R, 7R CS0RA, CS0RB, 0R, R CS08R, 9R CS00R, R CS0R, R, R, 7R CS08R CS0R CS07R CS08R, 70R Conte Conte INTER-LEAF LINER KIT FOR LEAF SPRINGS IL0YE 6 LINERS PER KIT SLK60 LEAF SLEEVES TO SUIT 60MM WIDTH SLK70 LEAF SLEEVES TO SUIT 70MM WIDTH SLO00 I/LEAF LINER SMALL MM THICK SLO00 I/LEAF LINER LARGE MM THICK LEAF SPRING CENTRE BOLT SLEEVES Part No. Length mm OD mm ID mm CBS0 CBS0 0 9 6.8 Application LandCruiser 60 series rear GQ Patrol cab chassis front Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LEAF SPRINGS SPECIFICATIONS - LEAF SPRINGS Stack No. of Eye Dia. mm Weight Primary Spring Rate Part No. OME Part No. Height Leaves Front Rear (kg) Free lbf / in N / mm (mm) Camber mm CS00F OME 8.0 8.0.0.0 6 0 6. CS00R OME.0 +.0.0. 00 / 0. / 79 CS00F OME.0 9.0.0 7.0 6 98 69.8 CS00R OME 9.0 6 +.0.0.6 7 / 96 6. / 87 CS00F OME0 0.0.0.0. 00 0 8. CS00R OME0 8.0 6 +.0.0. 0 / 70 90 / CS00F OME 6.0 6.0.0 7.7 96 7 CS00RA OMEA 8.0 6 +.0.0.6 0 68 / 70 7.0 / 00 CS00RB OMEB 8.0 6 +.0.0.6 0 68 / 70 7.0 / 00 CS00F OME.0 7.0.0. 96 0. CS00RA OMEA 6.0 7 +.0.0 6.0 0 / 67 / 08 CS00RB OMEB 6.0 7 +.0.0 6.0 0 / 67 / 08 CS006F OME67.0 7.0.0.6 0 0 CS006R OME9 8.0 7 + 0.0 0.0 6.8 0 88 / 60 68 / 07 CS007F OME67 9.0 8.0.0. 0 8 6 CS007R OME9 89.0 8 + 0.0 0.0. 0 / 600 80 / 0 CS008FA OME99A. 0.0 0.0.8 70 08 6. CS008FB OME99B. 0.0 0.0.8 0 08 6. CS008R OME9 96.0 9 + 0.0 0.0 9. 0 00 / 66 88 / CS009FA OME9A 9.0 6 0.0 0.0 8. 70. CS009FB OME9B 9.0 6 0.0 0.0 8. 0. CS009R OME7 8.0 + 0.0 0.0 0.0 0 7 / 88 8.0 / 68.0 CS00FA OMEA.0 7.. 8.9 8 9.6 CS00FB OMEB.0 7.. 8.9 00 8 9.6 CS00R OME7. + 0.0 0.0. 0 8 / 0.0 / 78.0 CS0FA OMEA 9.0 8... 60 CS0FB OMEB 9.0 8... 00 60 CS0R OME 6.0 8.. 6.8 7 7 CS0FA OMESA. 0.0 0.0 8. 07 6. CS0FB OMESB. 0.0 0.0 8. 0 07 6. CS0R OME 6.0 9.. 0. 7 0 CS0FA N/A 0.0 0.0 0.0 0. 7 7.9 CS0FB N/A 0.0 0.0 0.0 0. 0 7 7.9 CS0R OME9 68.0 + 0.0 0.0 7.9 68 79 / 8 / 96 CS0F OMEJF 6.0. 7.6.0 0 8 6 +CS0R +OME9 68.0 + 0.0 0.0 7.9 68 79 / 8 / 96 CS0F N/A.0 6.0.0.0 90 69 6 +CS0R +OME9 76.0 6 + 0.0 0.0. 68 / 680 7 / 9 CS06F N/A 6.0 8.7 0.0 7.0 9 7 9 CS06RA OME6A 8.0 7 + 0.0 0.0 0.8 0 / 8 7 / 0 CS06RB OME6B 8.0 7 + 0.0 0.0 0.8 / 8 7 / 0 CS07RA OMEA 8.0 8.0.0. 0.7 CS07RB OMEB 8.0 8.0.0. 0.7 CS08F N/A 8.0 7.. 7.7 0 7. *CS08R *OME80. + 9.0 0.0.0 / 8 / 8 CS09R OME8. + 9.0 0.0 7. / 8 / 8 CS00R OME8 9.0 + 9. 0.0 0.6 60 / 0 8 / 9 CS0R OME8 6. + 9.0 0.0.0 7 / 7 8 / 00 CS0R OME.0 +. 7..0 9 9 / 88.0 / 68.0 +CS0R +OME 8.0 6 +. 7. 9. 9 0 / 70 / 00 CS0R OMEROD.0 + 9.0 0.0.0 8 0 / 0 6 / 79 CS06R OME6 9.0 +.7.7 6. 6 77 / 66 / 08 Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow mm tolerance either side. cont. * These springs have a 0mm lower nd Stage than other springs in the series. + These springs have a 0mm higher nd stage than other springs in the series.. When remaining stock is exhausted no further product will be available. Page 7 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LEAF SPRINGS SPECIFICATIONS - LEAF SPRINGS Stack No. of Eye Dia. mm Weight Primary Spring Rate Part No. OME Part No. Height Leaves Front Rear (kg) Free lbf / in N / mm (mm) Camber mm CS07R OME6 6. +.7.7 0. 6 7 / 66 8 / 6 CS08R OMEROD 8.0 + 9.0 0.0. 0 70 / 7 0 / 80 +CS09R +OMEROD 60. + 9.0 0.0. 0 6 / 66 8 / 08 CS00R OMENN. + 0.0.. 70 6 / / 9 CS0R OMENN 9.0 + 0.0.. 70 6 / 7 9 / 00 *CS0R *OMENN. + 0.0.. 70 6 / / 7 CS0RA OMEJCA. 6.0. 8. 0 8 6 CS0RB OMEJCB. 6.0. 8. 0 8 6 CS0RA OMEJCA 7.0 + 6.0. 0.9 7 / 7 / CS0RB OMEJCB 7.0 + 6.0. 0.9 0 7 / 7 / CS06R OMEJR. 7.6..7 0 88 CS07R OMEJR. 7.0.0.8 8 88 CS08R OMES 6.0 + 0.0 0.0 9.8 7 7 / 9 0 / CS09R OMES.0 + 0.0 0.0. 7 8 / 8 0 / 6 CS00R OME9 9.0 +. 7. 6. 8 / 6 / CS0R OME9.0 +. 7. 6. 00 / 96 / CS0R OME6.0 + 6.8.0 8.0 0 8 / 0 0 / CS0R N/A 0.0 + 0.0 0.0.0 9 70 / 0 0 / 60 CS0R- N/A 0.0 + 0.0 0.0.0 79 70 / 0 0 / 60 CS0R N/A 0.0 + 0.0 0.0.0 0 70 / 0 0 / 60 +CS0R N/A 7.0 + 0.0 0.0 7. 0 0 / 6.8 / 6.8 CS06RA OMEA.0 + 0. 0.0 6.7 / 9 0 / CS06RB OMEB.0 + 0. 0.0 6.7 09 / 9 0 / CS07R N/A 7.0 + 0.0 0.0. 07 8 / 9 / 69 CS08R N/A 0.0 + 0.0 0.0. 7 / 6 9 / 7 CS09R N/A.0 + 0.0.7.0 7 / 0 7 / 79 CS0R / CSR N/A 67.0 + 0.0. 6. 77 / / 9 CS0R N/A.0 +. 7. 0. 9 66 / 9 / 6 CS0R N/A.0 + 0.0 7.. 9 09 / 6 7 / 6 CS0R N/A 6.0 + 0.0 0.0 6. 90 0 / 0 6 / 8 CS06R N/A 7.0 + 0.0.7 0.0 7 7 / 7 6 / 6 CS07R N/A 9.0 + 0.0 0.0 6.6 / 67 / 0 CS08R N/A 66.0 + 0.0 0.0.8 60 00 / 69 / CS09R N/A.0 +.0.0.9 6 / 8 / 9 CS060R N/A 70.0 + 0.0.7. 8 77 / 608 9 / 07 CS06R N/A 8.0 + 0.0.7.9 08 86 /.7 / 6.7 CS06R N/A 60.0 + 9.0 0.0 6.0 / 9 8 / 80 CS06R N/A 6.0 + 9.0 0.0 8.0 6 9 / 60 / 07 CS06R N/A 8.0 + 60.0 6.0 9. 66 69 / 0 / 78 CS06R N/A 69.0 + 60.0 6.0 8. 66 67 / 8 7 / 0 CS066R N/A 9.0 8 + 0.0 0.0 9.6 66 / 679 7 / 9 CS068R N/A 66.0 + 0.0.7. 6 77 / 608 9 / 07 CS069R N/A 80.0 6 + 0.0.7 7.0 8 8 / 707 9 / CS070R N/A 8.0 7 + 0.0 0.0 0.0 08 / 68 7 / 0 CS07R N/A 6.0 6 + 0.0 0.0. 99 8 / / 76 CS0R N/A 9.0 + 0.0. 0.9 77 9 / 8 / 8 EL0R CS0R 68.0 + 0.0 0.0 7. / 0 / 90 EL0R CS0R 68.0 + 0.0 0.0 7. 80 / 0 / 90 EL0R CS0R 76.0 6 + 0.0 0.0.9 7 9 / / 9 EL0R *CS0R 0.0 + 0.0 0.0.6 7 70 / 0 0 / 60 EL0R CS0R 0.0 + 0.0 0.0.6 86 70 / 0 0 / 60 Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow mm tolerance either side. * These springs have a 0mm lower nd Stage than other springs in the series. + These springs have a 0mm higher nd stage than other springs in the series.. When remaining stock is exhausted no further product will be available. cont. Page 8 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A LEAF SPRINGS SPECIFICATIONS - LEAF SPRINGS Stack No. of Eye Dia. mm Weight Primary Spring Rate Part No. OME Part No. Height Leaves Front Rear (kg) Free lbf / in N / mm (mm) Camber mm EL0R CS0R 7.0 + 0.0 0.0 6.9 06 0 / 6 6 / 6 EL09R CS09R.0 + 0.0.7. 6 8 / 0 8 / 7 EL066R CS066R 9.0 8 + 0.0 0.0 8. 6 / 680 7 / 9 EL068R CS068R 66.0 + 0.0.7. 77 / 608 9 / 07 EL069R CS069R 7.0 6 + 0.0.7 6.0 7 8 / 707 9 / EL07R CS07R 6.0 6 + 0.0 0.0 0. 00 8 / / 76 EL07R N/A.0 + 0.0 0.0 7.8 99 9 / / 76 EL07R N/A 6.0 + 0.0 0.0.7 0 0 / / 90 EL07R N/A 69.0 + 0.0 0.0 7. 0 07 / / 0 EL077R N/A 8. 7 +.0.0 9.6 7 0 / 6 / EL079R N/A 68.0 + 0.0 0.0 7. / 0 / 89 EL080R N/A 68.0 + 0.0 0.0 7. / 0 / 89 EL08R N/A 76.0 6 + 0.0 0.0.0 / 689 7 / EL08R N/A 9.0 8 + 0.0 0.0 8. 7 / 678 7 / 9 EL08R N/A 6.0 + 0.0.7 8. 07 09 / 66 6 / 09 EL08R N/A 77.0 7 + 0.0.7. 9 / 686 / 0 EL08R N/A 8.0 7 + 0.0.7 9. 96 6 / 89 7 / EL086R N/A 6.0 + 0.0 7.0 8. 7 98 / 68 / 6 EL087R N/A 6.0 6 + 0.0 7.0. 8 / 98 / 70 EL088R N/A 66.0 + 0.0 7.0. 7 / 8 6 / 98 EL089R N/A.0 + 0.0 0.0 6.0 9 69 / 00 0 / EL090R N/A 6.0 + 0.0 0.0.9 88 0 / 89 9 / 68 EL09R N/A 68.0 + 0.0 0.0. 7 7 / 89 6 / 86 EL09R N/A.0 + 0.0.7.0 07 09 / 0 6.6 / 88. EL09R N/A 6.0 7+ 0.0.7. 9 / 6. / 99.0 EL09R N/A 70.0 7+ 0.0.7.8 96 6 / 90 7.8 / 0. EL09R N/A 7.0 + 0.0 0.0 7. 0 9 / 8 6. / 8. EL096R N/A 6.0 + 0.0 0.0.9 0 8 / 06.9 / 88.6 Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow mm tolerance either side.. When remaining stock is exhausted no further product will be available. Page 9 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs 0 X 9 7 8 9.0 8. 0 6 60 06 X 60 70 8.. 00 / 0 70 / 77 70 X 7 60 8.0 6. 0 00 X 7 8 70 8.0 6. 0 00 X 8 0 9 9. 8. 0 00 X 9 0 9 7.7 8. 90 80 6 X 9 0 7.7 8. 90 80 7 X 9. 60 8. 9.9 90 80 8 X 8 0 9.0 7. 00 60 9 X 8 0 0 9.0 7. 00 60 0 X 9 6 0.7 0.0 00 60 X 9 80 90 7.7 8. 80 9 70 X 9 0 7.7 8. 80 9 70 X 9. 0 0 8. 9.9 80 9 70 00 X. 8 8.. 7 0 0 X 0 0 7.. 7 0 0 X 6 0 0 6.0. 0 0 X 7.0. 8 0 0 X... 7 0 0 X 0 0 7.. 7 0 06 X 0 0.. 80 0 07 X 8 8.. 80 60 08 X.6.6 80 60 09 X 7 60 60..7 0 00 0 X 60 60 7.. 80 0 X. 6.6.8 90 60 X 7. 0 0 6.. 00 88 0 X. 6.6. 0 00 6 X 6 70 70.7. 60 6 00 7 X 6 80 80.7. 60 6 00 8 X. 8.6. 0 60 80 9 X..7. 90 0 0 X 60 60 6.6.9 80 0 X 6 00 00 8.0. 00 88 0 X.7.8 00 60 X 0 0.7.8 8 60 6 X. 8 8 6.. 90 0 7 X 9 8 8.0 6. 0 80 8 X 6 0 0.. 0 60 9 X. 7 7 7..6 0 0 80 0 X 6 7.. 0 6 00 X 6..0 0 0 90 X 0 0 7.7. 0 00 X 6 0 0.0. 6 60 X 7 60 60 7.. 0 8 80 X 70 70 7.. 00 60 6 X 7 6 60 6..9 60 0 8 X 7 6 60 6..9 60 0 9 X..9.7 80 0 0 X 6 00 00 7.0.7 0 7 0 60 X 8 0 0 8.. 60 0 60 X 6 9 9 8..6 80 0 60 X 7 0 0 7.0 6. 88 0 60 X 7 00 00 6.0. 7 8 0 60 X 8 7.7. 70 8 680 606 X 8 0 0 7.7. 70 8 680 607 X 6. 70 70 9.. 80 8 0 608 X 6. 80 80 9.. 80 8 0 609 X 9 0 0 8.0 7.8 90 68 0. When remaining stock is exhausted no further product will be available. cont. Page 0 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs 60 X 0 0 0 8.0 8.7 60 8 0 6 X 8 0 0 7.7. 70 8 680 6 X 0 0.99 8.9 70 0 680 6 X 0 0.99 8.9 70 0 680 6 X 0 0.99 8.9 70 0 680 6 X 0 0 0.0.7 0 0 66 X 90 90 0..6 0 67 X 0 0 7.0. 60 8 00 68 X 6 7.7. 7 00 69 X 0..6 0 60 X 0 0 9.0. 00 0 6 X 0 0 9.. 0 6 0 6 X. 7 7 7.0.6 0 7 60 6 X 7 7 6..8 00 60 6 X 6 6 6..8 00 60 6 X 7 8..8 0 9 60 66 X 00 00 0.0.7 0 0 67 X 7 7 0..6 0 68 X 0 0 0..6 0 69 X 0 0 9.. 0 6 0 60 X 0 0 7.0. 60 8 00 6 X 7. 7 7 9.9.9 80 0 88 60 X 7. 0 0 7.. 70 8 670 6 X 8 0 0 7..8 790 9 670 6 X 0 0 0..6 0 6 X. 60 60 9.0. 7 00 700 X 8 0 0 8.7.7 6 09 00 70 X 9 9.8 6.9 70 6 00 70 X 8. 0 0 9.8 6.6 6 09 00 70 X 9 9.8 6.9 70 6 00 70 X 8 0 0 8.8 6.6 6 09 00 70 X 9 9. 6.9 70 6 00 70 X 8. 0 0 8. 8.8 70 / 0 7 / 6 70 7 X 8. 0 0 8. 8.8 70 / 0 7 / 6 70 7 X 9 0 0 7. 8.0 7 8 70 7 X 0 0 0 7. 8.9 0 9 70 7 X 7. 9.8 00 70 70 7 X 7.7.6 0 77 70 70 X... 0 00 7 X. 00 00.0. 80 9 00 7 X 60 60 8.6 8.7 800 0 600 7 X 8 00 00 9.7 6. 0 9 80 7 X 9 90 90 9.7 7. 670 7 80 76 X 0 70 70 8.6 7.9 680 9 600 7 X 90 80 6.7.9 9 00 7 X 7 0 0 9.0 7.7 7 / 00 / 00 7 X 0 6.9 8. 0 7 0 7 X 8 6.8 6. 00 0 760 X 9 8 9.0. 80 / 0 / 60 76 X 00 90 7.. 00 60 76 X 7. 0 0 8.6 7.0 00 / 0 / 60 70 76 X 8 0 0 7.8 6.7 60 6 00 76 X 6 0 0 8.0. 0 9 00 76 X 0 0 8.0.7 0 9 0 766 X 6 0 0 7..0 0 0 767 X 6 8 7 6.66. 8 0 00 768 X 0 60 60.0 0. 0 79 0 770 X 6 80 70 0.0 6. 60 60 776 X 0 90 7.0.6 60 8 0. When remaining stock is exhausted no further product will be available. cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs 777 X. 9 7 7..0 80 0 779 X. 8 7 7.9.6 9 0 780 X 8. 70 60 8.68 9.0 0 / 0 / 9 60 78 X 7 7.7.9 90 60 789 X 6 80 80 7..9 0 7 80 790 X 7 78 78 9.. 00 87 00 79 X 6 80 80 7..9 0 7 80 79 X 9.. 7 0 79 X 0 0..7 6 9 0 79 X 6 60 7.. 0 7 0 79 X 6 8 8 6.0.0 60 6 0 796 X 6 0 7.. 0 7 0 797 X 0 0 0.0.7 0 9 00 798 X 00 00 0.. 0 6 80 799 X 6.. 00 0 80 X 6..9 0 6 0 80 X 6 6 6 0.7. 0 9 0 88 X 8 0 0 7. 7.7 0 / 90 6 / 60 80 X 6. 9 0 9.0 6. 0 8 60 80J X 7 9.9 7. 0 8 60 8 X 6 7 8 8.8. 0 8 60 8 X 6. 8 8 0. 6. 7 8 60 86 X 6 6 6 0.0. 0 0 0 89 X 6 70 70 9.. 7 8 0 860 X 7 80 90 6.88 6.0 0 8 70 86 X 6 80 90 0. 6.8 70 / 0 0 / 60 86 X 7 60 70 9.0 7.8 70 / 60 0 / 6 60 86 X 8 80 90 7.0 6.9 0 70 86J X 8. 0 7.7 9. 6 6 70 86 X 9 80 90 7. 7.8 0 6 70 86 X 7 60 60 6.88 6.0 0 8 70 866 X 8 6 6 9.0 8.8 0 / 00 / 70 868 X 0 80 90 7. 8.8 60 6 70 869 X 6. 80 80 9.8.7 90 0 00 870 X 70 8..6 0 8 60 87 X 6 0 00 7..9 0 8 60 87 X 00 00 9.0.9 90 60 87 X 6 8..6 00 60 87 X 08 08 9.0. 0 8 60 87 X 7 0 0 8. 6. 0 70 876 X 90 7 8..6 00 60 880 X 6 6 6 0..7 00 87 90 88 X 6 7 7 0..7 00 87 90 88 X 6. 9 9.. 00 87 90 88 X 6. 7 7 9.7.7 90 0 00 88 X 6. 90 90 9.7.7 90 0 00 88 X 6. 9 9 9.7.7 90 0 00 88 0/09 On X 7 9 9 0.7.7 90 0 00 886 X 7. 0 0 0.6.9 660 90 887 X 6. 00 00 9.7.7 90 0 00 887 0/09 On X 7 00 00 0.7.7 90 0 00 888 X 6. 0 0 9.7.7 90 0 00 888 0/09 On X 7 0 0 0.7.7 90 0 00 889 X 6. 00 00 6..6 60 0 890 X. 0 0 9.7.0 90 0 89 X. 9..6 0 7 0 89 X 7 00 90 8.9 6. 60 / 80 67 0 89 X 6. 90 90 6..6 60 0 89E X 7 7 7 6.7. 60 0. When remaining stock is exhausted no further product will be available. cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs 896 X 8 90 90 6.7 6. 8 6 0 897 X 9 90 90 6.7 6.9 87 68 0 898 X 8 00 00 6.7 6. 8 6 0 899 X 9 00 00 6.7 6.9 87 68 0 900 X 0 9 6.6. 80 0 90 X 6 9 8 6..6 0 8 0 90 X 8 0 0 8.. 60 60 90 X 6 80 80 7..0 0 7 60 90 X 0 0 6.8. 70 0 0 90 X 7 6.0.6 60 6 00 906 X 90 80 9.0.0 0 / 70 8 60 907 X 7 70 70..0 7 60 908 X 6 9 9 7.. 68 6 00 90 X 7 00 90 7. 6.9 0 / 60 6 / 60 9 X 6 00 90 7. 6.0 0 / 0 / 0 60 9 X 0 0 0.8.7 80 / 00 / 60 9 X 90 90 9..9 80 / 00 / 60 9 X 8 0 0 8.. 60 80 9 X 8 8.. 60 80 97 X 7. 8. 700 / 900 / 8 60 98 X 8 8 7. 9. 860 / 000 / 7 60 99 X 0 0 0.8.7 00 / 80 / 9 60 90 X 0 0 8.0.7 90 60 9 X 6 8 8 6.8. 00 0 9 X 60 60 6.. 0 0 9 X 6 9 9 6.8. 00 0 9 X 9 0 0 8. 6. 790 8 80 9 X 6 8 8 0.77. 7 66 0 96 X 6 9 9 0.77. 7 66 0 97 X 6 9 9 0..0 00 70 0 98 X 6 0 0 6.8. 00 0 99 X 6 0 0 0.8 6. 0 / 00 / 80 90 X 7 6 9.8. 6 8 0 9 X 0 00.9. 0 0 9 X 80 70..8 0 0 9 X 9 8..8 0 0 9 X 0 00 0.0. 60 8 0 9 X 0 0 9.8. 80 0 96 X 0 0 0.0.8 0 9 70 97 X 00 00 7.. 0 9 70 98 X 8 00 90 7. 7.7 0 / 90 6 / 60 99 X 6.6 6.6 0 9 70 90 X 80 70 8.6.7 90 0 9 X 90 7 7.. 0 0 9 X. 80 6 6.8. 60 8 0 9 X 70 60 8.6. 0 0 0 9 X 9 8 8.0. 90 6 9 X 6 0 0 7..7 0 70 97 X 6 0 0.8. 70 0 0 98 X 6 0 0.6. 00 0 99 X 7 70 7..6 6 8 60 90 X 6 00 00 8..0 0 9 0 9 X 90 90 8.. 0 77 0 9 X 8..8 0 9 X 6 8 8 8.. 0 9 0 9 X 0 0 8.. 80 0 9 X 0 0 0.0.0 00 0 96 X 6 0 0 8.. 00 88 0 99 X 6 0 0 8..0 0 9 0. When remaining stock is exhausted no further product will be available. cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number 960 96 96 96 96 966 967 968 969 970 97 97 97E 97 97 97E 97 976 977 978 979 980 98 98 98 98 98 986 987 988 990 99 99 99 99 99 996 997 998 999 07 08 09 00 0 0 0 06 07 08 09 00 0 06 07 08 09 0 0 XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs X 00 00 8.. 0 77 0 X 0 0 0.0.0 00 0 X 6 0 0 8..0 0 9 0 X. 0 0 0.0. 6 6 0 X. 6 6 0.0. 6 6 0 X 0.0. 76 0 X 9.0. 76 0 X 70 70 9..7 0 7 0 X 60 60 9.. 70 0 0 X 7 9 8 6.7. 0 6 60 X 7 0 9 6.66. 0 6 60 X 6 00 8 6.. 0 60 X 6 0 0 6.. 0 60 X 6 00 6.. 0 60 X 6 8 70 6.. 0 60 X 6 8 8 6.. 0 60 X 6 0 7..0 0 9 60 X 6 0 7..9 0 9 60 X 0 70 70 7.6 7. 70 8 60 X 0. 70 70 7.6 7.6 790 8. 60 X 0. 7 7 7.6 7.6 790 8. 60 X 9 90 70 9.0 0.0 0 00 X 80 60 9.0. 00 00 X 9 70 0 9.0 0.0 0 00 X 0 80 9.0. 00 / 00 / 70 00 X 80 9.0. 60 / 0 6 / 79 00 X 80 60 7.0 9.8 70 8 00 X 00 00 8. 0.0 0 9.7 80 X 00 00 8..0 60 07 80 X. 00 00 8.. 680 9 80 X 8 70 70 8.9 6. 0 9 0 X 9 6 6 8.9 7. 60 0 0 X 7 7..8 0 90 X 8 6.6 6.0 80 9 90 X 7. 8. 700 / 900 / 8 600 X 0 0 7. 9. 860 / 000 / 7 600 X 7. 70 7. 6.0 0 00 X 8 60 60 8.7. 800 0 700 X 8 6 6 8.7. 800 0 700 X 8. 6 6 8.7.8 80 7 700 X 8. 7.6. 800 0 680 X 7 0 0 8. 6. 0 8 0 X 7 0 0 8. 6. 0 8 0 X 0 7. 9.0 70 / 0 7 / 8 90 / 80 X 8 0 0 8.0 7.0 0 6 N/A X 0 8 9.0. 00 N/A X 0 8 8.. 70 8 N/A X 8 8.0 7.0 0 6 N/A X 0 0 9.0. 00 N/A X 0 0 8.. 70 8 N/A X 7 0 0 9.9 7. 0 8. N/A X 9 0 8. 9. 0 N/A X 9 0 0 8. 9. 0 N/A X. 90 90 9.8. 00 N/A X. 0.7. 0 6 N/A X 8 0 0 8.7. 800 0 N/A X 0 0 8. 0. 0 6 N/A X 7 9.9 7. 0 8. N/A X 0 0 0 8. 0. 0 6 N/A cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs 06 X 6. 60 60 9.7.7 90 0 80 07 X 6. 6 6 9.7.7 90 0 80 08 X 6. 70 70 9.7.7 90 0 80 09 X. 80 80 9..0 0 0 060 XT 60 60 8.0 7.9 880 70 06 X 6. 0 0 9.8 6. 0 / 00 /. N/A 06 X. 0 0 9. 6.0 00 N/A 06 X 6 0 0 9. 6. 9. N/A 06 X 7 0 0 9. 8. 7 / 00 0.6 / N/A 06 X 9 9. 0.0 70 / 0 7 / 8 N/A 066 X 00 00 9.66.9 70 / 0 6 / 7 N/A 067 X. 70 60 8.. 0 / 60 6 / N/A 070 X. 9..0 0 0 07 X. 8 8 9..0 0 0 07 X. 9 9 9..0 0 0 07 X. 60 60 9..0 0 0 07 XT 0 8 8 8.0 7.0 70 70 07 XT. 80 80.9. 0 9 N/A 076 XT. 60 60.9. 0 9 N/A 077 X 7 00 90 8. 6. 0 8 N/A 078 XT 0 0 9 7. 8. 70 / 0 7 / 8 N/A 079 X 7. 0 0 7.7.7 690 N/A 080 X 8 7.7.0 7 0 N/A 08 X. 0 0.7 6.0 0 0 086 X 6 0 00 0.7 6.0 0 0 087 X 0 0 8.. 0 8. 0 088 X. 0 0 0..9 00 / 60 / 6 00 089 X 6 0. 6. 0 / 00 / 00 090 X 6. 0 0 0. 6.7 60 / 0 6 / 8 00 09 X 8.8. 0 8. 0 09 X. 8.8. 60 6 0 09 X 6. 0 0 8..0 0 6 0 09 X 8 0 0 8.7. 800 0 700 09 X 6 8..8 80-60 -6 0 096 X 7 0 0 8. 6. 0-0 9-6 0 097 X 8 0 0 8. 7. 80-80 9-67 0 098 X 9 0 0 8. 8. 0-0 6-8 0 099 X 6.7 90 90 0.0. 00 87. 0 00 X 6.7 9 9 0.0. 00 87. 0 0 X 6.7 00 00 0.0. 00 87. 0 0 X 8. 0 0 7.7. 800 0 760 0 X 8. 0 0 7.7. 800 0 760 0 X 8. 7.7. 800 0 760 0 X 8. 0 0 7.7. 800 0 760 06 X 8 70 70 8.7 8. 0-0 -8 80-0 07 X 8. 90 90 8.7 8.6 60-0 6-6 80-0 08 X 8 0 0 8.. 60 N/A 09 X 8 0 0 8.. 60 N/A 0 X 9. 00 00 8.0 7.8 6-70 98-9 N/A X 0. 0 0 8.0 8. 700-80 -7 N/A X. 80 80 6.9 9. 97 70 N/A X 7. 9.8 7.0 00-00 -70 N/A X 6. 8 8 9.7.7 90 0 00 X 8 7.7.0 7 0 N/A 6 X 8 0 0 7.7.0 7 0 N/A X 8 7.7. 70 8 680 GQ0A X 8 6 6 9.0 9.0 00 80 GQ0AM X 8 0 90 8.7 8.7 0 / 0 9 / 80 GQ0B X 9 9.0 0.0 0 / 80 / 9 80. When remaining stock is exhausted no further product will be available. cont. Page OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - COIL SPRINGS COIL SPRINGS Spring Number XK Bar Dia. Free Height mm Number Coil weight Spring Rate OE Spring Steel mm A B Of Turns (kg) lbf / in N / mm Rate Lbs GQ0C X 8 80 6 9.0 9.0 00 80 GQ0CM X 7 8 70 9.0 7.9 70 / 90 0 / 80 GQ0D X 8 80 80 9.0 9.0 00 80 GQ0G X 9 7 60 9.0 0.0 0 / 0 9 / 6 80 GQ0LP X 9 7 9.0 0.0 0 / 80 / 9 80 Contents!A GQ0J X 0 80 6 9.0. 80 / 0 9 / 80 XK MICRO-ALLOYED SPRING STEEL is a new generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties. These properties are enhanced by additions of Silicon, Chromium, Vanadium Nickel along with lower Carbon than conventional spring steel grades. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Part Number Nitrocharger Sport SPECIFICATIONS - SHOCK ABSORBERS Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement 60000 98 P0 SMP9 N/A E00-BS 0-0- 0-0- 6000 98 P0 SMP9 SMP9 E00-BS 0-0- 0-0- 6000 6 68 P0 SMP9 SMP9 E00 0-0-069 OMEB0 6000 6 68 P0 SMP9 SMP9 E00 0-0-069 OMEB0 6000 80 6 P8 SMP69 N/A E00 SMP6 OMEB0 6000 80 6 P8 SMP69 SMP69 E00 SMP6 OMEB0 60006 600 7 E00 SMP69 SMP69 E00 SMP69 SMP69 60007 97 7 E00 SMP69 SMP69 E00 SMP69 SMP69 60008 9 P8 SMP0 OMEB P8 SMP0 OMEB 60009 89 9 P69 SMP7 OMEB E00 0-0-070 OMEB6 6000 6 0 E00 0-0-070 OMEB E00 0-0-070 OMEB 600 67 0 E00 0-0-070 OMEB E00 0-0-070 OMEB 600 96 0 P8 SMP OMEB P8 SMP OMEB 600 96 0 P8 SMP OMEB P8 SMP OMEB 600L P8 SMP OMEB P8 SMP OMEB 600 67 0 E00 SMP6 OMEB6 E00 SMP6 OMEB0 600 67 0 E00 SMP6 OMEB6 E00 SMP6 OMEB0 600L 76 6 E00 SMP6 OMEB6 E00 SMP6 OMEB0 6006 76 6 E0-S 0-0-076 N/A E0-S 0-0-076 N/A 6007 9 0 E00 0-0-07 OMEB E06-S 0-0-00 N/A 6008 67 9 P8 SMP0 OMEB P8 SMP0 OMEB 6008L 667 8 P8 SMP0 OMEB P8 SMP0 OMEB 6009 8 P8 SMP6 N/A E00-BS 0-0-076 N/A 6000 6 78 P8 SMP0 OMEB E00 0-0-070 OMEB6 6000L 67 78 P8 SMP0 OMEB E00 0-0-070 OMEB6 600 P69 SMP7 OMEB E06-S 0-A-07 OMEB0 600 6 9 P0 SMP670 OMEB E00 0-A-6 0-A-6 600 6 80 E00 - OMEB E00BS 0-0-080-600 87 68 E00-S 0-0-066 N/A E00-T 0-0-067 N/A 600L 67 88 E00-S 0-0-066 N/A E00-T 0-0-067 N/A 600 87 68 E00-S 0-0-066 N/A E00-BS 0-0-066 0-0-066 600L 67 88 E00-S 0-0-066 N/A E00-BS 0-0-066 N/A 6006 9 68 E00-S 0-0-066 N/A E00-BS 0-0-066 0-0-066 6007 8 P69 SMP7 OMEB E00 0-0-070 OMEB 6008 8 P69 SMP7 OMEB E00 0-0-070 OMEB 6009 6 68 P0 SMP9 N/A E00 0-0-069 OMEB0 6000 6 68 P0 SMP9 N/A E00 0-0-069 OMEB0 600 8 0 P SMP67 OMEB E06-S 0-A-07 OMEB0 600 97 6 E00 *0-0-07 OMEB E00 0-0-07 OMEB 600 8 P8 SMP6 N/A E0-BS 0-0-076 N/A 600 08 P0 SMP7 OMEB E06-S 0-A-07 OMEB0 600 60 E00 SMP6 OMEB E00 SMP OMEB 6006 9 9 E00 SMP6 OMEB E00 SMP OMEB 6007 9 P8 SMP7 OMEB P8 SMP7 OMEB 6007L 9 9 P8 SMP7 OMEB P8 SMP7 OMEB 6008 60 6 E00 0-0-069 OMEB0 P8 SMP68 SMP68 6009 60 6 E00 0-0-069 OMEB0 P8 SMP68 SMP68 6009L 600 66 E00 0-0-069 OMEB0 P8 SMP68 N/A 6000 P69 SMP7 OMEB E06-S 0-A-07 OMEB0 600 78 0 P69 SMP7 OMEB E00 0-0-077 OMEB7 600 P69 SMP7 OMEB E00-S 0-0-07 OMEB7 600 660 97 E00 0-0-070 OMEB E00 0-0-070 OMEB 600 60 90 E00 0-0-070 OMEB E00 0-0-070 OMEB 600 6 8 E - TB N/A N/A E - S N/A N/A 6006 6 P69 SMP76 N/A E06-TB 0-0-088 N/A Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. cont. *Also supplied with SMP9 spacer kit. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 7 OME INT CAT. NO.8 SEPTEMBER 08 Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement

Contents!A Part Number Nitrocharger Sport SPECIFICATIONS - SHOCK ABSORBERS Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement Original Kit Bushes only Replacement 6007 6 P69 SMP76 N/A E06-TB 0-0-088 N/A 6007L 678 9 P69 SMP76 N/A E06-TB 0-0-088 N/A 6008 9 8 E06-TB 0-0-089 N/A E06-S 0-A-0 N/A 6009 9 8 E06-TB 0-0-089 N/A E06-S 0-A-0 N/A 6009L 6 66 E06-TB 0-0-089 N/A E06-S 0-A-0 N/A 6000 69 89 E00 0-0-07 OMEB E00 0-0-07 OMEB 600 9 P69 SMP670 OMEB E06-T 0-0-078 00078 600 6 P69 SMP76 N/A E06-T 0-0-088 0-0-088 600L 678 9 P69 SMP76 N/A E06-TB 0-0-088 N/A 600 9 8 E06-T 0-0-089 0-0-089 E06-S 0-A-0 OMEB0 600L 6 66 E06-TB 0-0-089 N/A E06-S 0-A-0 OMEB0 600 6 8 E00 SMP7 OMEB6 P69 SMP7 OMEB 600 96 0 P8 SMP OMEB P8 SMP OMEB 6006 0 E00 0-0-07 OMEB E00-S N/A OMEB7 6007 9 9 E00 SMP6 OMEB E00 SMP6 OMEB 6008 69 69 E00 0-0-07 OMEB E00 0-0-07 OMEB 6009 9 E00 0-0-07 OMEB E00-S 0-0-07 OMEB7 60060 8 8 P0 SMP7 OMEB E00 SMP60 OMEB 6006 8 9 P69 SMP7 OMEB E06-S 0-A-07 OMEB0 6006 87 7 E00 0-0-070 OMEB E00 0-0-070 OMEB 6006 88 8 P69 SMP7 OMEB E00 0-0-070 OMEB6 6006 9 60 E00 0-0-07 OMEB E00 0-0-07 OMEB 6006 8 6 E00 0-0-070 OMEB E00 0-0-070 OMEB 60066 80 8 P8 SMP68 OMEB E N/A N/A 60066L 69 0 P8 SMP68 OMEB E N/A N/A 60066M 66 8 P8 SMP68 OMEB E N/A N/A 60067 69 68 E-TB N/A N/A E N/A N/A 60067L 706 E-TB N/A N/A E N/A N/A 60068 09 P69 SMP7 OMEB E00 0-0-070 OMEB 60069 76 6 E07-S 0-0-08 N/A E00-S 0-0-086 N/A 60070 67 9 P8 SMP0 OMEB P8 SMP0 OMEB 60070L 667 8 P8 SMP0 OMEB P8 SMP0 OMEB 6007 6 78 P8 SMP0 OMEB E00 0-0-070 OMEB6 6007L 67 87 P8 SMP0 OMEB E00 0-0-070 OMEB6 6007 8 P69 SMP7 OMEB E00-S 0-0-07 OMEB7 6007 9 P69 SMP7 OMEB E00 0-0-070 OMEB6 6007 7 E00-S 0-0-07 OMEB7 E00 0-0-070 OMEB 6007 9 E00 0-0-07 OMEB E00-S 0-0-07 OMEB7 60076 9 E00 0-0-07 OMEB E00-S 0-0-07 OMEB7 60077 8 P0 SMP7 OMEB E00-S 0-0-070 OMEB 60078 8 P0 SMP7 OMEB E00-S 0-0-070 OMEB 60080 60 68 P8 SMP69 SMP69 E00 SMP6 OMEB0 6008 60 68 P8 SMP69 SMP69 E00 SMP6 OMEB0 6008 60 68 N/A N/A N/A N/A N/A N/A 6008 60 68 N/A N/A N/A N/A N/A N/A 6008 60 0 P SMP70 N/A E 0-0-6 N/A 6008 60 0 P SMP70 N/A E 0-0-6 N/A 60086 60 68 P8 SMP69 SMP69 E00 SMP6 OMEB0 60087 0 P70 SMP N/A E06-T SMP87 N/A 60088 80 E07-S 0-0-08 N/A E00 0-0-00 OMEB0 60089 69 8 E-0-S 0-0-070 N/A P69 SMP7 OMEB 60090 08 08 E00 0-0-070 OMEB P69 SMP7 OMEB 6009 99 60 P0 SMP7 OMEB E06-S 0-A-07 N/A 6009 6 P969 SMP76 OMEB E06-T 0-0-08 N/A 6009 6 E00 0-0-076 N/A E06-S 0-0-06 OMEB0 6009 69 9 P8 SMP OMEB P8 SMP OMEB Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. cont.. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 8 OME INT CAT. NO.8 SEPTEMBER 08 Type LOWER MOUNT BUSH KIT

Contents!A Part Number Nitrocharger Sport SPECIFICATIONS - SHOCK ABSORBERS Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement 6009 8 P69 SMP7 OMEB E00 0-0-070 OMEB 60096 E00 0-06-070 OMEB E00 0-06-070 OMEB 60097 9 E00 0-0-07 OMEB E00 0-0-07 OMEB 60098 6 6 P69 SMP76 OMEB E06-S 0-A-0 OMEB0 60099 09 9 E00 0-0-06 OMEB E06-S 0-A-0 OMEB0 6000 60 8 P SMP9 N/A E 0-0-0 N/A 600 6 80 E00 0-0- OMEB E00-BS 0-A-6 N/A 600 6 80 E00 0-0- OMEB E00-BS 0-A-6 N/A 6009 68 0 E00 0-0-070 OMEB E00 0-0-070 OMEB 600 9 0 E00 0-0-07 OMEB E06S 0-0-00 N/A 60 66 00 E00 0-0-070 OMEB E00 0-0-070 OMEB 60 80 6 P8 SMP69 N/A E00 SMP6 OMEB0 60 600 6 E 0-A-9 N/A P SMP706 N/A 60 60 6 P SMP706 N/A E 0-0-077 N/A 606 0 E00 0-0-07 OMEB E00 0-0-07 OMEB 607 0 E00 0-0-07 OMEB E00 0-0-07 OMEB 60 60 70 P SMP9 N/A E 0-0-0 N/A 60 78 60 E SMP67 N/A E 0-A- N/A 60 60 0 P0 SMP9 - E0-S 0-0-0 0-0-0 60 8 P SMP7 N/A CLEVIS N/A N/A 60 8 P SMP7 N/A CLEVIS N/A N/A 606 0 8 P SMP7 N/A CLEVIS N/A N/A 607 0 8 P SMP7 N/A CLEVIS N/A N/A 600 9 6 P SMP7 N/A E 0-0-0 N/A 60 9 6 P SMP7 N/A E 0-0-0 N/A 60 67 90 SMP69 N/A SMP69 N/A 60 67 90 SMP69 N/A SMP69 N/A 60 67 7 0-0-07 N/A 0-0-07 N/A 60 67 9 0-0-07 N/A 0-0-07 N/A 606 608 79 0-0-07 N/A 0-0- N/A 607 608 79 0-0-07 N/A 0-0- N/A 608 0 0-0-07 N/A 0-0-07 N/A 609 0 0-0-07 N/A 0-0-07 N/A 600 0 0-0-07 N/A 0-0-07 N/A 60 8 SMP7 OMEB SMP6 OMEB0 60 8 SMP7 OMEB SMP6 OMEB0 60 86 Use OE Use OE 0-0-8 N/A 60 86 Use OE Use OE 0-0-8 N/A 60 96 0 P8 SMP OMEB P8 SMP OMEB 60 67 0 E00 SMP6 OMEB6 E00 SMP6 OMEB0 609 6 68 P0 SMP78 N/A E00 0-0-069 OMEB0 600 6 68 P0 SMP78 N/A E00 0-0-069 OMEB0 90000 P SMP67 SMP67 E00-S 0-0- 0-0- 9000 0 7 P N/A N/A N/A 0-0-00 0-0-00 9000 8 P SMP67 SMP67 E00-S 0-0- 0-0- 9000 90 87 P SMP6 N/A E06-BS 0-0-00 0-0-00 9000 (0/ on) 90 87 P SMP6 N/A E06-BS 0-0- 0-0- 9000 7 0 P SMP67 N/A E00-B 0-0- 0-0- 9000 6 P OE OE E066 0-0-0 0-0-0 90006 7 0 N/A Use OE Bushes N/A E0BS 0-0-07 N/A 90006 (0/ on) 7 0 N/A Use OE Bushes N/A E0BS 0-0- N/A 90007 7 0 P Use OE Bushes N/A E0BS 0-0- N/A 90008 6 06 P N/A N/A E0BS 0-0- N/A 90009 9 07 P Use OE Bushes N/A N/A N/A N/A 9000 P Use OE Bushes N/A E00-S 0-0- 0-0- 9000 (09/ On) P Use OE Bushes N/A E00-S 0-0- 0-0- Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. cont.. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 9 OME INT CAT. NO.8 SEPTEMBER 08 Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement

Contents!A Part Number Nitrocharger Sport SPECIFICATIONS - SHOCK ABSORBERS Open Length (mm) Closed Length (mm) Type UPPER MOUNT BUSH KIT Original Kit Bushes only Replacement 900 8 P SMP66 SMP66 E00-S 0-0- 0-0- 900 6 8 P SMP698 N/A N/A N/A N/A 900 6 8 P SMP698 N/A N/A N/A N/A 900 8 97 P SMP67 OE E 0-0-7 N/A 900 8 97 P SMP67 OE E 0-0-7 N/A 9006 P Use OE Bushes N/A E00-S 0-0- 0-0- 9006 (09/ On) P Use OE Bushes N/A E00-S 0-0- 0-0- 9007 6 P OE OE E066 0-0-0 N/A 9008 60 P SMP70 N/A E 0-0-0 N/A 9009 0 68 P OE OE E N/A 0-0-9 9000 0 68 P OE OE E N/A 0-0-9 900 P SMP67 SMP67 E00-S 0-0- 0-0- 900 9 0 P Use OE Bushes N/A N/A 0-0- N/A 900 9 0 P Use OE Bushes N/A N/A 0-0- N/A 9006 8 66 P SMP79 N/A CLEVIS N/A N/A 9008 60 0 N/A N/A 0-0- N/A 9009 60 0 N/A N/A 0-0- N/A 900 0 SMP7 N/A 0-0- N/A 900 9 9 USE OE N/A 0-0- N/A 900 0 SMP7 N/S 0-0- N/A 900 6 P OE OE E066 0-0-0 N/A Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. See page 6 for legend of mount types. Type LOWER MOUNT BUSH KIT Original Kit Bushes only Replacement Page 60 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - SHOCK ABSORBERS S Part Number Open Closed UPPER MOUNT BUSH KIT LOWER MOUNT BUSH KIT Nitrocharger Length Length Type Bushes only Type Bushes only Original Kit Original Kit (mm) (mm) Replacement Replacement N /NC 7 7 E00-S 0-0-07 N/A E00 0-0-070 OMEB6 N6 77 P8 SMP7 OMEB E078-T SMP87 00078 N7 6 8 E06-T SMP88 00078 E06-S 0-0-07 N/A N8 0 P69 SMP7 OMEB E06-S 0-A-07 OMEB0 N9/N9C 9 9 P8 SMP OMEB P8 SMP OMEB N 9 9 P8 SMP OMEB P8 SMP OMEB NF 66 96 E00 SMP6 OMEB6 E00 SMP6 OMEB0 NF 9 9 P8 SMP OMEB P8 SMP OMEB N 6 77 E00 SMP7 OMEB6 P69 SMP7 OMEB N6F 8 P69 SMP7 OMEB E06-S N/A OMEB0 N7 60 0 E00 0-0-069 OMEB0 P8 SMP68 SMP68 N8 0 09 P69 SMP7 OMEB E00 SMP OMEB6 N9/N9C 66 96 E00 SMP6 OMEB6 E00 SMP6 OMEB0 N0 68 68 E00 0-0-06 OMEB E00 0-0-06 OMEB N0E 69 89 E00 *0-0-06 OMEB E00 0-0-06 OMEB NS 0 8 N/A N/A N/A N/A N/A N/A N 00 P69 SMP7 OMEB E06-S N/A OMEB0 N 6 6 P69 SMP76 OMEB E06-S 0-0-06 OMEB0 N 09 9 E00 0-0-06 OMEB E06-S 0-0-06 OMEB0 N /NC 68 8 P69 SMP76 N/A E06-T 0-0-088 0-0-088 N6/N6C 6 E06-T 0-0-089 0-0-089 E06-S 0-0-06 OMEB0 N7 9 66 E00-S 0-0-0 N/A E00-S 0-0-0 N/A N8S 7 9 P N/A N/A E-B N/A N/A N9 /N9C 6 P69 SMP76 SMP76 E06-T 0-0-088 0-0-088 N0 /N0C 6 6 E00 0-0-076 N/A E06-S 0-0-06 OMEB0 N 99 09 E00 0-0-06 OMEB E00 0-0-06 OMEB N 9 9 E00 0-0-06 OMEB E00 0-0-06 OMEB N 8 9 P69 SMP7 OMEB E00 0-0-06 OMEB N 60 0 E00 0-0-069 OMEB0 P8 SMP68 SMP68 NF P8 SMP OMEB P8 SMP OMEB N6 60 0 E00 0-0-069 OMEB0 P8 SMP68 SMP68 N7 06 P69 SMP7 OMEB P69 SMP7 OMEB N8 60 E00 0-0-06 OMEB P69 SMP7 OMEB N9 6 7 P69 SMP7 OMEB P69 SMP7 OMEB N0 8 9 P69 SMP7 OMEB E00 0-0-070 OMEB6 N 6 P69 SMP7 OMEB E06-BS 0-0-8 0-0-8 N /NF 6 P6 SMP N/A E06-S 0-A-07 OMEB0 N /NC 68 78 E00-B 0-00-00 N/A E06-S 0-0-8 0-0-8 N 9 E00 *0-0-06 OMEB E00 0-0-06 OMEB N 8 P6 SMP N/A E06-S 0-A-07 OMEB0 N6 9 E00 *SMP6 OMEB E00 SMP6 OMEB N7G 0 P69 SMP7 OMEB E06-S N/A OMEB0 N8 P69 SMP7 OMEB E06-S N/A OMEB0 N9 9 9 E00 *SMP6 OMEB E00 SMP6 OMEB N60G 0 P69 SMP7 OMEB E06-T 0-0-078 00078 N6/N6C 607 67 E00-S SMP6 OMEB7 E06-S 0-0-06 OMEB0 N6G 07 7 E00 0-0-06 OMEB E00-S 0-0-077 OMEB7 N6G 78 99 P69 SMP7 OMEB E00-S 0-0-077 OMEB7 N6 /N6C 78 99 P69 SMP7 OMEB E00-S 0-0-077 OMEB7 N6 8 P69 SMP7 OMEB E06-S 0-A-07 OMEB0 N66 /N66C 68 P69 SMP76 N/A E06-TB 0-0-088 N/A N67 6 9 E06-TB 0-0-089 N/A E06-S 0-0-06 OMEB0 N68 60 8 E00 0-0-070 OMEB E00 0-0-070 OMEB N68E 660 9 E00 0-0-070 OMEB E00 0-0-070 OMEB N69 70 90 E00 0-0-070 OMEB6 P8 SMP OMEB Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. cont. *Spacer Kit SMP also supplied.. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - SHOCK ABSORBERS S Part Number Open Closed UPPER MOUNT BUSH KIT LOWER MOUNT BUSH KIT Nitrocharger Length Length Type Bushes only Type Bushes only Original Kit Original Kit (mm) (mm) Replacement Replacement N70 6 P8 SMP0 OMEB P8 SMP0 OMEB N7E 60 70 P8 SMP0 OMEB E00 0-0-070 OMEB6 N7F 8 9 P69 SMP7 OMEB E00 0-0-070 OMEB6 N7 6 P8 SMP0 OMEB P8 SMP0 OMEB N7E 60 70 P8 SMP0 OMEB E00 0-0-070 OMEB6 N7 60 90 E00 0-0-070 OMEB E00 0-0-070 OMEB N7E /N7F 6 97 E00 0-0-070 OMEB E00 0-0-070 OMEB N76 68 08 E00 0-0-070 OMEB E00 0-0-070 OMEB N77 70 0 E0-S 0-0-077 N/A P69 SMP7 OMEB N78 7 87 E00 0-0-070 OMEB E00 0-0-070 OMEB N79 07 07 E00 0-0-070 OMEB6 P69 SMP7 OMEB N80 P69 SMP7 OMEB E00-S 0-0-07 OMEB7 N8 99 09 E00 0-0-06 OMEB E00 0-0-06 OMEB N8 P69 SMP7 OMEB E06-S SMP8 OMEB0 N8 8 9 P69 SMP7 OMEB E06-S N/A OMEB0 N8 87 7 E00 0-0-070 OMEB E00 0-0-070 OMEB N86/N86C 9 9 P69 SMP7 OMEB E00 0-0-070 OMEB N87 P69 SMP7 OMEB E00-S 0-0-07 OMEB7 N88 89 9 P69 SMP7 OMEB E00 0-0-070 OMEB6 N89 9 9 E00 **0-0-06 OMEB E00 0-0-06 OMEB N90 8 7 E00 0-0-070 OMEB E00 0-0-070 OMEB N9S 70 P- SMP N/A E00-B 0-0- 0-0- N9SC 70 P- SMP N/A E00-B 0-0- 0-0- N9 89 9 P69 SMP7 OMEB E00 0-0-070 OMEB6 N9 8 9 P69 SMP7 OMEB E06-S N/A OMEB0 N9 87 7 E00 0-0-070 OMEB E00 0-0-070 OMEB N9 99 9 E00 **0-0-06 OMEB E00 0-0-06 OMEB N96 6 P69 SMP7 OMEB P69 SMP7 OMEB N97 E00 0-0-06 OMEB P69 SMP7 OMEB N98 89 9 P69 SMP7 OMEB E00-S 0-0-07 OMEB7 N00 0 90 P0 SMP9 N/A E00-BS 0-0- 0-0- N0/N0C 60 60 P0 SMP9 SMP9 E00 0-0-069 OMEB0 N0 8 0 P69 SMP7 OMEB E00-BS 0-0- N/A N0S 0 8 P- N/A N/A N/A N/A N/A N0/N0C 6 9 E00-S 0-0-0 N/A E0-S 0-0-069 N/A N0 08 8 P69 SMP7 OMEB E06-S 0-00-07 OMEB0 N06 /N06C 7 7 P8 SMP0 OMEB P8 SMP0 OMEB N07 /N07C 608 7 E00-S 0-0-066 N/A E00-T 0-0-067 N/A N08 /N08C 9 6 E00-S 0-0-066 N/A E00-BS 0-0-066 0-0-066 N09S 7 7 N/A Use OE Bushes N/A E0BS 0-0-07 N/A N0 7 0 P8 SMP6 N/A E00-BS 0-0-076 N/A N 8 8 P70 SMP N/A E06-S SMP87 N/A N 9 79 P69 SMP7 OMEB E00 0-0-070 OMEB N 7 7 E00 0-0-070 OMEB E00 0-0-070 OMEB N 7 8 P8 SMP OMEB P8 SMP OMEB N P8 SMP7 OMEB P8 SMP7 OMEB N6 7 7 E00 0-0-06 OMEB E00-S 0-0-07 OMEB7 N7 78 8 E07-S 0-0-08 N/A E00-T 0-0-00 OMEB0 N8 P69 SMP7 OMEB E00 0-0-080 OMEB N9S 96 9 N/A SMP8 SMP8 N/A N/A N/A NC0 609 0 N/A 0-09-08 00908 N/A N/A N/A NS 76 89 N/A SMP8 SMP8 N/A N/A N/A NC 89 0 N/A 0-09-08 00908 N/A N/A N/A NS 96 9 N/A SMP8 SMP8 N/A N/A N/A NS 76 89 N/A SMP8 SMP8 N/A N/A N/A Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. cont. ** Spacer Kit SMP9 supplied. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - SHOCK ABSORBERS S Part Number Open Closed UPPER MOUNT BUSH KIT LOWER MOUNT BUSH KIT Nitrocharger Length Length Type Bushes only Type Bushes only Original Kit Original Kit (mm) (mm) Replacement Replacement NS 89 P SMP6 SMP6 N/A N/A N/A N6S 89 P SMP6 SMP6 N/A N/A N/A N7S 60 8 P SMP SMP E-BS N/A N/A N8 8 8 P0 SMP7 OMEB E06-T SMP89 N/A N9S 7 7 P Use OE Bushes N/A E0-BS 0-0-07 0-0-07 N9S (0/ on) 7 7 P Use OE Bushes N/A E0-BS 0-0- 0-0- NS0 0 P SMP7 SMP7 N/A N/A N/A NS 0 P SMP7 SMP7 N/A N/A N/A N 7 9 E07-S 0-0-08 N/A E00-S 0-0-086 N/A N 87 P0 SMP9 SMP9 E00-BS 0-0- 0-0- N 9 9 E07-S 0-0-08 N/A E00-S 0-0-086 N/A NS /N6S 60 9 P SMP8 SMP8 N/A N/A N/A NC8 609 00 P SMP6 N/A - - - N9S 0 P SMP6/66 N/A E00-S 0-0- 0-0- N0S 0 P SMP6/66 N/A E00-S 0-0- 0-0- N 77 P8 SMP69 N/A E00 SMP6 OMEB0 N 77 P8 SMP69 N/A E00 SMP6 OMEB0 NS 90 08 P - N/A - - N/A NS 90 08 P - N/A - - N/A NS 9 0 N/A SMP6 N/A N/A N/A N/A NC 6 9 P SMP6 N/A - - N/A N6 6 79 P SMP6 N/A E0-BS 0-0-09 N/A N6S 9 0 N/A SMP6 N/A N/A N/A N/A N7S 76 6 P SMP60 N/A E00-S 0-0- 0-0- N8S 76 6 P SMP60 N/A E00-S 0-0- 0-0- N9 0 E0-BS 0-0-09 N/A E0-BS 0-0-09 N/A N0 88 P0 SMP7 OMEB E06-S 0-A-07 OMEB0 N 08 0 P0 SMP7 OMEB E06-S 0-A-07 OMEB0 N 76 P8 SMP6 N/A E0-BS 0-0-076 N/A N 8 P0 SMP7 OMEB E06-S 0-0-07 OMEB0 N 6 6 E00 0-0-06 OMEB E00 0-0-06 OMEB N 68 P0 SMP7 OMEB E00 0-0-06 OMEB N6S 6 0 - Nut only OEM N/A OEM OEM N7S 6 0 - Nut only OEM N/A OEM OEM N8S 0 60 - Nut only OEM N/A OEM OEM N9S 0 60 - Nut only OEM N/A OEM OEM NC60 60 0 P SMP6 SMP6 N/A N/A N/A NC6 7 86 P SMP6 & 6 SMP6 & 6 N/A N/A N/A N6 8 P0 SMP7 OMEB E06-S 0-A-07 OMEB0 NC6 67 86 P SMP6 & 6 SMP6 & 6 N/A N/A N/A N6 7 7 P8 SMP0 OMEB P8 SMP0 OMEB N6 67 97 E00 0-0-070 OMEB E00 0-0-070 OMEB N66S P SMP6 & 66 SMP6 & 66 E00-S 0-0- 0-0- N67S P SMP6 & 66 SMP6 & 66 E00-S 0-0- 0-0- N68 600 70 E00 SMP69 SMP69 E00 SMP69 SMP69 N69 600 70 E00 SMP69 SMP69 E00 SMP69 SMP69 N70 8 P0 SMP7 OMEB E06-S 0-A-07 OMEB0 N7 6 P0 SMP7 OMEB E00 SMP60 OMEB N7 6 P0 SMP7 OMEB E00 SMP60 OMEB N7S 8 0 P N/A N/A - N/A N/A N7 97 P80 SMP SMP P80 SMP SMP N7 60 6 E00 0-0-06 OMEB6 P80 SMP SMP N76 9 E0-S 0-0-066 N/A P80 SMP SMP N77 8 99 E0-S 0-0-066 N/A P80 SMP SMP N78 600 6 E00 0-0-08 0-0-08 E00-S 0-A- OMEB N79 790 6 E00 0-0-08 0-0-08 E00-S 0-A- OMEB Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers. cont.. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A SPECIFICATIONS - SHOCK ABSORBERS S Part Number Open Closed UPPER MOUNT BUSH KIT LOWER MOUNT BUSH KIT Nitrocharger Length Length Type Bushes only Type Bushes only Original Kit Original Kit (mm) (mm) Replacement Replacement N80 690 06 E00 0-0-08 0-0-08 E00-S 0-A- OMEB N8 7 7 P8 SMP0 OMEB P8 SMP0 OMEB N8 608 P0 SMP7 OMEB E06-S 0-A-07 N/A N8S 90 8 P- SMP6 N/A E06-BS 0-0-00 N/A N8S (0/ on) 90 8 P- SMP6 N/A E06-BS 0-0- N/A N8 79 E0-S 0-0-076 N/A E0-S 0-0-076 N/A N8 67 E00 0-0-06 OMEB E06-S 0-0-00 N/A N86S 6 98 P- N/A N/A E0-BS 0-0-07 N/A N87 60 0 P0 SMP7 OMEB E00 TBA 0-0-8 N88S - - - - - - - - N89 600 60 E00 0-0-070 OMEB E00BS 0-0-080 - N90 68 9 E07-S 0-0-08 N/A E00-S 0-0-086 - N9 89 9 P0 SMP7 OMEB E00-S 0-0-070 OMEB N9S 89 P- SMP69 SMP69 E0-BS 0-0-0 - N9 66 9 P0 SMP9 - E00-BS 0-0-0 N/A N9 60 0 P0 SMP7 OMEB E00 TBA 0-0-8 N9 60 0 P0 SMP9 - E0-S 0-0-0 - N96 76 8 P8 SMP7 OMEB E-TBA TBA TBA N97 6 97 E00 0-0-070 OMEB E-00 0-0-070 OMEB N98 6 7 E-TBA TBA TBA E-TBA TBA TBA N99 0 90 P0 SMP9 SMP9 E00-BS 0-0- 0-0- N00 60 60 P0 SMP9 SMP9 E00 0-0-069 OMEB0 N0S 0 P- SMP6/66 SMP6/66 E00-S 0-0- 0-0- N0 77 P8 SMP69 SMP69 E00 SMP6 OMEB0 N0S 7 7 P Use OE Bushes N/A E0-BS 0-0-07 0-0-07 N0 76 P8 SMP6 N/A E0-BS 0-0-076 N/A N0 07 P SMP66 N/A E0-BS 0-0-09 N/A N06S 60 99 P- Nut only N/A N/A N/A N/A N07S 60 99 P- Nut only N/A N/A N/A N/A N08S 608 P Use OE Bushes Use OE Bushes E066 N/A 0-0-0 N09 60 60 P0 SMP9 N/A E00 0-0-06 OMEB0 N0 60 60 P0 SMP9 N/A E00 0-0-06 OMEB0 N 76 8 P8 SMP7 OMEB E06 0-0-8 0-0-8 N 68 7 E0 0-0-0 N/A E06 0-0-8 0-0-8 N7S 60 9 P- N/A N/A N/A N/A N/A N8S 60 9 P- N/A N/A N/A N/A N/A N9S 6 7 P Use OE Bushes N/A OEM OEM N/A N0 68 9 E07-S 0-0-08 N/A E-00-S 0-0-086 N/A OME007 600 9 E00 0-0-00 N/A E00 0-0-00 N/A OME0 7 9 E00 0-0-07 OMEB E00 0-0-07 OMEB OME0 9 0 E00 0-0-07 OMEB E00 0-0-07 OMEB OME0 6 P7 SMP OMEB E00 0-0-07 OMEB OME08 8 9 E00 0-0-00 N/A E00 0-0-00 N/A OME0 9 70 E00 0-0-07 OMEB E00 0-0-07 OMEB OME0 6 P7 SMP OMEB E00 0-0-07 OMEB OME07 97 97 P7 SMP OMEB E00 0-0-07 OMEB OME08 0 8 P69 SMP7 OMEB E08-S 00009 N/A OME09 0 E08-S 00009 N/A E08-S 00009 N/A OME00 70 0 E08-S 00009 N/A E08-S 00009 N/A OME0 67 79 P7 SMP OMEB E00 0-0-07 OMEB OME0 608 69 P7 SMP OMEB E00 0-0-07 OMEB OME0 6 8 P- SMP66 OMEB E00-S 0-0-07 OMEB7 OME0 8 8 P7 SMP OMEB E00 0-0-07 OMEB OME0 9 99 E00 0-0-07 OMEB E00 0-0-07 OMEB OME06 60 E 6088 N/A E 6088 N/A Note: Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.. When remaining stock is exhausted no further product will be available. See page 6 for legend of mount types. Page 6 OME INT CAT. NO.8 SEPTEMBER 08

Contents!A Contents! SPECIFICATIONS - SHOCK ABSORBERS SHOCK ABSORBER MOUNT TYPES Mount Type Dimensions (mm) OME Replacement Pin Part No. Thread Length X Dia Part No. P6 6 x M0 x. OMEB P69 x M0 x. OMEB P70 7 x M0 x. OMEB P7 8 x M0 x. OMEB P8 7 x M x. OMEB P0 8 x M x. Use original P0 77 x M x. Use original P0 x M0 x. OMEB Mount Type Dimensions (mm) Mounting Kit Eye Part No. OD x ID x L Replacement Part No. E00 7 x. x. OMEB E00.6 x 7.7 x 9. Not available E00. x.7 x 0 OMEB6 *OMEB0 E06 7 x 7 x OMEB0 E08 8. x. x Not available E0 6.7 x 6.6 x Not available E00 6 x 7 x 0 Not available E00 x 9 x Not available E0 0 x 0. x Not available E07 x. x 9 Not available T-CROSS PIN MOUNTING S-BUSH WITH SLEEVE B-BONDED BUSH *Special Bush for NF, N9/N9C Lower Rear Mount. When remaining stock is exhausted no further product will be available. Contents!A Contents! SPECIFICATIONS - TORSION BARS TORSION BARS A B C C D D Part Number ±.0 ± 0. +0-0. Spline No. +0-0. Spline No. 000 60 0. 7.0 6 7.0 6 000 0.8 7.0 6 7.0 6 000 06..0 0.7 0 000 000..0.0 000 9.7 0.7 0 0.7 0 0006 6 7. 0.0 9 0.7 0 0007 890 6.7 0.0 9 0.0 9 0008 0 6.0 0.0 9 0.0 9 0009 77.. 0.0 9 0.7 0 000 77. 7. 0.0 9 0.7 0 00 07. 7. 0.0 9 0.7 0 00 6.0 6.0 7 6.0 7 00 0 7.0 0.8 0 0.7 0 00 0. 7.9 6 side hex 7.8 6 side hex All dimensions in millimetres (mm) Page 6 OME INT CAT. NO.8 SEPTEMBER 08

INTERNATIONAL APPLICATION CATALOGUE. Number 38 September 2018