MSeries High Rigidity Vertical Machining Centers
M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers. We're always looking for solutions to improve our products and give you the best quality, reliable machines and service. 3 axes adopt high rigidity box ways design which is suitable for high rigidity requirements of heavy cutting. German made ZF gear box is option to provide high torque output to fulfill heavy cutting capability. Also, equipped 15,000 rpm direct drive spindle provides high speed high accuracy machining application is available for option. Arm type tool ATC system provides smooth tool changing without delay. Powerful coolant nozzles around spindle featured with high pressure flush coolant design provides high performance chip removal capability while ensuring outstanding machining accuracy. 1
High Rigidity Vertical Machining Centers M860 / M1100 / M1320 / M1600 / M1600L The M series featured excellent cutting and structural rigidity along with high torque ZF gear box, high speed spindle and ATC system to achieve heavy-duty machining capability. Drilling, milling and tapping can be processed in one set-up to fulfill your requests in the future. 2
M Series The Meehanite casting structure and A-shaped column design provide solid support to efficiently enhance structure rigidity. The massive structure of bed, column, and table are all adopted with enforced cross ribs design that offers the best stability and precision for constantly machining. By carrying the weight of tool magazine and tools on casting body can enforce reliability of tool change and extend usage of tool magazine. Box ways are coated with specialized Turcite-B which can not only prevent slow-moving and lower abrasion, but also maintain high rigidity, low wear and noiseless along with great positioning accuracy. Bed Structure One-piece wide bed structure with four box ways eliminates over-hang issue of working table to ensure optimal solid support. Contact surface between bed and column are carefully hand scraped to ensure optimal precision assembly and enforce structural strength. Rapid Axial System 3 axes are adopted with direct drive AC servo motor to ensure great heavy load ability and provide high dynamic accuracy and fast acceleration/deceleration. C3 class ball screw with double nuts ensures optimal accuracy and long lasting. Besides, pre-tension design on all axes eliminates thermal deformation to ensure outstanding machining accuracy. 3
SUPER RIGID STRUCTURE M860 / M1100 / M1320 / M1600 / M1600L M1600 High rigidity structure 4
Unique Spindle System Depend on machining characteristics, gear drive system provides high torque machining, or high speed direct drive system is also available for specific high accuracy dies & molds machining. High speed 15,000 rpm direct drive spindle provide high machining accuracy due to isolating heat from motor. Equipped 2-step German made ZF gear box provides high torque heavy cutting capability at low rpm. ( Option L1060 / L1320 ) Spindle frame is adopted enforced steel alloy and 3 sets of bearing. Spindle motor runs through dynamic balancing to ensure quality is beyond G0.4 high accuracy balancing according to ISO 1940 standard while ensuring spindle run-out less than 0.003mm. All series are standard with spindle chiller to eliminate thermal deformation and ensure high accuracy and long lasting. BT 40 15,000 rpm Direct drive Spindle Torque [ N-m ] 80 70 FANUC α8i T Low speed 11 kw ( 30 min. ) Output [ kw ] 12 Torque [ N-m ] 40 FANUC α8i T High speed 11 kw ( 30 min. ) Output [ kw ] 12 60 48 7.5 kw ( cont. ) 9 30 28 7.5 kw ( cont. ) 9 40 Torque ( 30 min. ) 6 20 19 Torque ( 30 min. ) 6 20 3 10 3 1,500 Torque ( cont. ) 4,000 Torque ( cont. ) 0 1,000 2,000 3,000 4,000 0 3,750 7,500 11,250 15,000 Constant Torque Constant Output Constant Torque Constant Output BT BT 40 408,0008,000 rpm Belt rpm drive Belt Spindle drive Spindle BT BT 40 408,0008,000 rpm ZF rpm Gear ZF drive Gear drive Torque [ N-m ] FANUC α8i Output [ kw ] Torque [ N-m ] FANUC α8i Output [ kw ] 80 16 320 16 70 60 48 11 kw ( 30 min. ) 12 280 240 192 11 kw ( 30 min. ) 12 40 7.5 kw ( cont. ) 8 160 7.5 kw ( cont. ) 8 20 Torque ( cont. ) Torque ( 30 min. ) 1,500 4 80 L H 375 Torque ( 30 min. ) Torque ( cont. ) 4 0 2,000 4,000 6,000 8,000 0 2,000 4,000 6,000 8,000 Constant Torque Constant Output Constant Torque Constant Output 5
Belt drive system Direct drive system Gear drive system BT BT 40 40 10,000 10,000 rpm rpm Belt Belt drive drive Spindle Spindle Torque [ N-m ] 120 FANUC α12i Low speed Output [ kw ] 20 Torque [ N-m ] 60 FANUC α12i High speed Output [ kw ] 20 95 90 70 15 kw ( 30 min. ) 11 kw ( cont. ) 15 45 44 15 kw ( 30 min. ) 11 kw ( cont. ) 15 60 30 Torque ( cont. ) Torque ( 30 min. ) 10 5 30 28 15 Torque ( 30 min. ) 10 5 1,500 Torque ( cont. ) 0 2,000 4,000 6,000 8,000 10,000 0 2,000 4,000 6,000 8,000 10,000 Constant Torque Constant Output Constant Torque Constant Output BT BT 40 408,0008,000 rpm Belt rpm drive Belt Spindle drive Spindle BT BT 40 406,0008,000 rpm ZF rpm Gear ZF drive Gear drive Torque [ N-m ] FANUC α15i Output [ kw ] Torque [ N-m ] FANUC α15i Output [ kw ] 160 24 500 480 24 120 95 18.5 kw ( 30 min. ) 15 kw ( cont. ) 18 380 375 18.5 kw ( 30 min. ) 15 kw ( cont. ) 18 80 Torque ( 30 min. ) 12 250 Torque ( 30 min. ) 12 70 1,500 Torque ( cont. ) 0 2,000 4,000 6,000 6 125 L H 375 Torque ( cont. ) 0 2,000 4,000 6,000 6 Constant Torque Constant Output Constant Torque Constant Output 6
Fast and Reliable ATC System Equipped with high efficiency ATC system which provides reliable and smooth tool changing without delay. 7
8
High Efficieny Chips Removal Side exit type Side exit type Option High pressure chips flush coolant Screw type chip auger x 1 High pressure chips flush coolant Caterpillar type chip conveyor M860 M1100 M1320 M860 M1100 M1320 9
Rear exit type Rear exit type Option High pressure chips flush coolant Screw type chip auger x 2 High pressure chips flush coolant Screw type chip auger x 2 Caterpillar type chip conveyor M1600 M1600L M1600 M1600L 10
Dimensions Table Dimensions T-slot Dimensions ( Unit : mm ) 18 C C C C B 12 29 *1 D 32 A *1 36 ( M1600 / M1600L ) Model A B C D M860 984 500 130 55 M1100 1,260 600 120 60 M1320 1,520 700 145 60 M1600 1,800 800 165 70 M1600L 1,800 800 165 70 Machine Dimensions M860 / M1100 / M1320 I J H G K E F A B C D Model A B C D E F G H I J K M860 2,960 3,615 2,380 2,535 2,695 2,925 700-400 850 700 M1100 3,000 3,660 2,280 2,540 2,710 3,060 680 380 950 845 750 M1320 3,360 3,960 2,720 2,875 2,760 2,970 700-400 850 700 11
Tool Shank and Pull Stud Dimensions ( Unit : mm ) BT40 Ø 63 Ø 53 35 16.6 ± 0.1 10 ± 0.1 65.4 ± 0.2 2 ± 0.4 25 Ø 44.45 M16 60 35-0.1 Ø 10-0.1 28-0.1 3 4 60 Ø 15-0.1 45 BT50 35 23.2 ± 0.1 15 ± 0.1 Ø 100-0.05 Ø 85 Ø 69.85 25.1 101.8 ± 0.2 3 ± 0.4 40 M24 146.8 85 45-0.1 60 5 5 45 Ø 17-0.1 Ø 23-0.1 30 30 GAUGE DIA. TAPER 7/24 30 30 35-0.1 TAPER 7/24 GAUGE DIA. CAT40 16.1 3.3 11.1 84.5 68.3 16.2 CAT50 11.2 3.3 19.1 Ø 63.5 Ø 44.45 90 Ø 69.8 101.8 44.9 Ø 98.3 60 TAPER 7/24 GAUGE DIA. Ø 7.3 Ø 12.9 Ø 19.1 TAPER 7/24 GAUGE DIA. 34.8 60 Ø 16.8 Ø 22.8 Machine Dimensions M1600 / M1600L M1600 : R600 / M1600L : R600 M1600 : R850 / M1600L : R850 M1600 : R950 M1600L : R950 M1600 : R950 / M1600L : R950 M1600 : 3,130 / M1600L : 3,130 M1600 : 4,300 / M1600L : 4,300 M1600 : 4,615 / M1600L : 4,615 M1600 : 3,210 / M1600L : 3,560 12
SPECIFICATIONS M860 M1100 X-axis travel mm 860 1,100 Y-axis travel mm 510 610 Z-axis travel mm 610 700 Distance from spindle center to column mm 590 650 Distance from spindle nose to table top mm 150 ~ 760 140 ~ 840 WORKING TABLE Table size mm 984 x 500 1,260 x 600 T-slot ( width x no. x space ) mm 18 x 4 x 130 18 x 5 x 120 Table load capacity kg 900 1,000 SPINDLE Spindle motor ( cont. / 30 min ) kw 7.5 / 11 Spindle speed rpm Belt drive 8,000 ( Opt. 10,000 ) Direct drive 10,000 ( Opt. 12,000 / 15,000 / 20,000 ) Belt drive 8,000 ( Opt. 10,000 ) Direct drive 10,000 ( Opt. 12,000 / 15,000 / 20,000 ) Gear drive 6,000 ( Opt. 8,000 ) Spindle taper # 40 # 40 FEED RATE X / Y / Z axes rapid feed rate m/min. 24 / 24 / 16 Cutting feed rate m/min. 10 TOOL MAGAZINE Tool magazine capacity T Carousel type 16 ( Opt. Arm type 24 ) Max. tool diameter / adj. pocket empty mm Ø 78 / Ø 150 Max. tool length mm 300 Max. tool weight kg 7 ACCURACY Positioning accuracy ( JIS B 6338 ) mm ± 0.010 / Full Travel Positioning accuracy ( VDI 3441) mm P 0.010 / Full Travel Repeatability ( JIS B 6338 ) mm ± 0.003 Repeatability ( VDI 3441) mm Ps max 0.005 Arm type 24 ( Opt. 30 / Carousel type 20T ) GENERAL Control system FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN Power requirement kva 32 Pneumatic pressure requirement ( min. ) kg/cm 2 5 ~ 8 ( 5 ) Coolant tank capacity ( pump ) liter 240 ( 1 ) Machine weight kg 4,500 6,500 Standard Accessories Spindle chiller Centralized automatic lubricating system Alarm light Coolant nozzles around spindle Chips flush coolant system Halogen work light Fully enclosed splash guard Air gun system Operation manual Coolant system with pump and tank Automatic power off system Adjusting tools & tool box Screw type chip auger Leveling bolts & pads 13
M1320 M1600 M1600L 1,320 1,600 1,600 710 800 1,000 700 800 800 755 860 1,060 # 40 : 130 ~ 830 # 50 : 94 ~ 794 170 ~ 970 1,520 x 700 1,800 x 800 18 x 5 x 145 18 x 5 x 165 1,500 2,000 11 / 15 15 / 18.5 ( Opt. 18.5 / 22 ) 15 / 18.5 ( Opt. 18.5 / 22 ) Belt drive 8,000 ( Opt. 10,000 ) Direct drive 10,000 ( Opt. 12,000 / 15,000 / 20,000 ) Gear drive 6,000 ( Opt. 8,000 ) Belt drive 8,000 Gear drive 6,000 ( Opt. 8,000 ) Belt drive 6,000 / 8,000 ( Opt. 4,500 / 8,000 / 10,000 ) Direct drive 15,000 Gear drive 4,500 ( Opt. 6,000 ) # 40 # 50 # 40 / # 50 24 / 24 / 16 18 / 18 / 12 10 10 Arm type 24 ( Opt. 30 / Carousel type 20T ) Arm type 24 ( Opt. 30 / Chain type 40 ) Arm type 24 ( Opt. 30 / Chain type 40 ) Ø 80 / Ø 150 Ø 125 / Ø 150 Ø 80 / Ø 150 or Ø 125 / Ø 200 300 300 / 400 7 15 7 / 15 ± 0.010 / Full Travel ± 0.010 / Full Travel P 0.010 / Full Travel P 0.015 / Full Travel ± 0.003 ± 0.003 Ps max 0.005 Ps max 0.007 FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN 42 48 48 5 ~ 8 ( 5 ) 5 ~ 8 ( 5 ) 240 ( 1 ) 280 ( 1 ) 8,500 14,000 Specifications are subject to change without notice. Optional Accessories ZF gear box Oil skimmer CNC rotary table 15,000 rpm direct drive spindle Oil mist system AC cooler for electrical cabinet Coolant through spindle ( 20 bar ) Automatic tool length measurement Caterpillar type chip conveyor X / Y / Z axes optical linear scale Automatic work-piece measurement Automatic voltage regulator 14
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan Tel : +886-4-2359-3351 Fax : +886-4-2359-0012 E-mail : extron@extroncnc.com YIH CHUAN MACHINERY ( JIAXING ) INDUSTRY CO., LTD CHINA BRANCH 314031 No.3198, Zhongshan West Rd., Xiuzhou Industrial Area, Jiaxing, Zhejiang Tel : +86-573-8279-9488 Fax : +86-573-8279-7299 E-mail : yihchuan@extroncnc.com EXTRONCNC.com Copyright EXTRON All rights reserved E-M-EN-201707