KILLBROS CORNER-AUGER GRAIN CARTS Enhanced Unloading Speed and Reach! If you re looking for an economical, valuable and time-saving addition to your farming operation, look to the Killbros family of side-folding, single-auger grain carts. All models feature the quality materials and construction associated with Killbros products for more than 60 years. Plus, their added unloading speed and reach will help you improve your harvest productivity.
CORNER-AUGER CART FEATURES AND BENEFITS 1 2 3 4 5 6 7 Hydraulically operated flow-control door with gauge for metering grain allows for easy topping off of trucks Transport lights, reflective striping and transport chain for safer road travel Convenient storage for hydraulic hoses Clevis or single tang, swivel-style hitch prevents damage to tractor drawbar Standard LED auger light for nighttime unloading Direct-mounted auger-fold cylinder provides positive locking control with fewer moving parts. Killbros carts feature nickel undercoating and chrome plating on the cylinder for the best protection against weathering Lower auger sump placement enables steeper front and rear slopes for complete and easy cleanout FPO ADDITIONAL FEATURES Killbros grain carts are available with a great selection of undercarriage options, including high-flotation tires, auto- tensioning tracks, hydraulic-cushioned track, or the patented Equalizer track system for unrivaled flotation and a smooth ride, depending on model Shear bolt-protected driveline with extra shear bolts that store along the tongue for minimal downtime Nonslip surface on tongue and viewing ladder Choose red or green high-quality enamel paint with all seams silicone-sealed for longer life 4 3 1150 500 BU CAPACITY 14" AUGER 1160 600 BU CAPACITY 14" AUGER
KILLBROS MODELS 735, 835, 1035 AND 1135 THE 35-SERIES MODELS feature larger-diameter and greater-length augers than previous models for enhanced unloading speed and reach. The 20" diameter augers unload up to 500 bushels per minute and the 18" augers unload up to 400 bushels per minute for a quicker return to the combine. The two-way downspout makes topping off the load quicker and easier. 5 1 6 7 2 Standard two-way downspout for added unloading control Single-point, patented cushioned auger connection and aligned flighting for longer life and enhanced grain flow Single-tang cast steel hitch with chamfered opening and non-slip tread on tongue Tubular steel frame and axle construction to handle the heavy loads optional adjustable axles on larger models Wheel-operated cleanout door on 35 series, lever-operated on 1150 and 1160 735 750 BU CAPACITY 18" AUGER 835 850 BU CAPACITY 18" AUGER
AVAILABLE OPTIONS Weatherguard roll-over tarp to protect grain is standard on 1135; optional on others as factory, or field installed Hydraulic drive kit for easily converting from PTO drive Track Options All tracked undercarriages are factory aligned and ready for in-field use and feature heavy-duty greaseable hubs with purgeable, triple-lip seals for longer life UHarvest data management system provides full ISO terminal or tablet operation while it tracks, stores and sends detailed harvest information. UHarvest Lite provides ISOBus VT operation and provides weight, date and time for 400 most recent loads. Basic or enhanced scale packages with large LCD readout and easy operation for any operator Auto-tensioning tracks continuously adjust to the cart s load and ground contour for maximum flotation; 36 -wide x 112 belt for optimum maneuverability and less compaction; available for 1135, 1035 and 835 Hydraulic-tensioning design with 36 -wide x 131 or 148 belt for model 1135 with steel end-wheels and pivoting cast bogie wheels; hydraulic hoses included for easy adjustment using tractor s hydraulics Equalizer Tracks Patented Equalizer tracks for model 1135 are independently cambered to follow ground contours for optimum flotation and minimum compaction 42"-wide x 131" belt for enhanced maneuverability and greater flotation Exclusive belt design with shallow tread for greater flotation and traction 40" main idler wheels with 10-bolt hubs for added durability Cast, pivoting mid-rollers are on the same plane as the main idler wheels for optimum flotation Hydraulic belt tensioning adjustment for easier track alignment Auto-greaser for automatic grease application at more frequent intervals for consistent, optimum lubrication on track undercarriages, standard on Equalizer track, optional on others 1035 1000 BU CAPACITY 20" AUGER 1135 1100 BU CAPACITY 20" AUGER
Model 1150 Model 1160 Loaded Ground Pressure* Tire Size Model Number 1150 1160 735 835 1035 1135 Equalizer Tracks - 42" x 131" 10.70 Hydraulic-Tension Tracks - 36" x 148" 9.48 Hydraulic-Tension Tracks - 36" x 131" 12.00 Auto-Tension Track - 36" x 112" 11.37 12.80 13.64 480/80x46 Duals 18.17 420/80x46 Duals 16.28 18.22 520/85x42 Duals 11.63 13.02 15.79 480/80x42 Duals 13.96 15.62 520/85x38 18.76 24.44 IF1250/50x32 (188A8) 15.01 16.36 1250/50x32 (201A8) 16.40 17.99 1050/50x32 18.03 19.61 900/70x32 23.56 900/65x32 15.63 17.50 21.23 23.10 900/60x32 17.99 20.14 24.44 800/65x32 20.48 22.93 800/60x32 23.55 26.37 650/75x32 22.67 28.19 30.5x32 13.71 16.11 24.5x32 16.51 19.39 23.1x26 18.39 *Loaded P.S.I. calculated at 3 soil penetration depth and is presented for relative comparison of the options www.killbrosequip.com
SINGLE-AUGER GRAIN CARTS SPECIFICATIONS Model Number 1150 1160 735 835 1035 1135 Capacity* (bushels) 500 600 750 850 1000 1100 Minimum Tractor HP 130 140 150 180 200 200 Loaded Tongue Weight (lbs) 3200 3600 4990 5550 4700 4800 Empty Tongue Weight (lbs) 900 1000 1200 1350 1450 1500 Auger Diameter 14" 14" 18" 18" 20" 20" Unload Speed (bushels/minute) 300 300 450 450 500 500 Flighting Thickness 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" Hub Size/Spindle Diameter** 2 7/8" 3 3/4" Hydraulic Remotes Required 2 2 3 3 3 3 Front/Rear Hopper Slope (degrees) 36/36 36/36 39/34 39/34 39/34 39/34 A. Hopper Length 13' 10" 13' 10" 16' 16' 21' 6" 21' 6" B. Hopper Width 11' 10" 11' 10" 11' 10" 11' 10" 11' 10" 13' C. Auger Side Reach Max (to inside of rubber spout) C. Auger Side Reach Min (to inside of rubber spout) 6' 2" 6' 2" 9' 2" 9' 2" 9' 9" 9' 9" 6' 2" 6' 2" 7' 2" 7' 2" 7' 3" 7' 3" D. Overall Transport Length 23' 10" 23' 10" 27' 7" 27' 7" 29' 7" 29' 7" E. Hitch to Center of Axle 13' 6" 13' 6" 15' 7" 15' 7" 16' 10" 16' 10" Single Wheels & Tires Measured Undercarriage 520/85x38 24.5x32 800/65x32 800/65x32 900/65x32 Adj Axle 1050/50x32 Empty Weight (lbs) 7120 7300 11,450 12,750 13,050 14,500 F. Hitch Height 1' 7" 1' 7" 1' 7" 1' 10" 1' 10" 1' 10" G. Hopper Height Low Side 9' 7" 10' 2" 11' 11' 3" 11' 8" 11' 8" H. Hopper Height High Side 10' 11" 11' 6" 12' 12' 3" 12' 6" 12' 7" I. Auger Height with Spout Straight Down J. Height to Top of Auger in Unload Position 12' 5" 12' 5" 12' 11" 12' 11" 13' 13' 14' 11" 14' 11" 17' 11" 17' 11" 17' 11" 17' 11" K. Width Outside of Tires 12' 12' 12' 10" 12' 10" 14' 4" 14' 6" L. Center of Tire to Center of Tire 10' 3" 10' 3" 10' 10' 11' 2" 11' 3" min. 12' 9" max. M. Underframe Height 1' 4" 1' 4" 1' 5" 1' 5" 1' 5" 1' 5" Tracks Measured Undercarriage - - - 36" x 75" Auto-Tension 36" x 75" Auto-Tension 36" x 75" Auto-Tension Empty Weight (lbs) - - - 19,200 21,000 21,500 F. Hitch Height - - - 1' 5" 1' 5" 1' 5" G. Hopper Height Low Side - - - 11' 3" 11' 1" 11' 1" H. Hopper Height High Side - - - 12' 3" 12' 1" 12' 2" I. Auger Height with Spout Straight Down J. Height to Top of Auger in Unload Position - - - 12' 10" 12' 11" 12' 11" - - - 17' 8" 17' 7" 17' 7" K. Width Outside of Tracks - - - 13' 7" 13' 11" 13' 11" L. Center of Track to Center of Track - - - 10' 7" 10' 11" 10' 11" M. Underframe Height - - - 1' 4" 1' 1" 1' 1" *Capacities measured with #2 corn, with 15% moisture and 56 pound test weight **Constructed from high-tensile strength steel Stop by your nearest dealer to see how Killbros grain carts can help make your farming operation more efficient. For more information, and to find your nearest Killbros dealer, visit us at killbrosequip.com. www.killbrosequip.com P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 unverferth.com 2018 Unverferth Manufacturing Co., Inc. Printed in U.S.A. TM Trademarks, registered or applied for, of Unverferth Manufacturing Co., Inc., Kalida, OH Additional facilities in California, Georgia, Iowa, Nebraska, North Dakota, Oregon, Ontario and Saskatchewan, Canada kbcorner815180m5