Cargo Handling Sheet Caradol SC 48-08 Document date: 4 June 2014
Product Details: Product Name: Caradol SC 48-08 Shipping Name: Chemical Family: Product Code: SDS: Glycerol Propoxylated and Ethoxylated Polyol U311L http://www.shell.com/chemicals/responsible-energy/msds-search.html Physical Properties: Density: 1019 kg/m3 @ 20 deg C. Dynamic Viscosity: 760 (mpa) @ 20 deg C. 270 290 (mpa) @ 40 deg C. Vapor Pressure: Boiling Point: Melting Point: Data Flash Point: >200 deg C. Transshipments Prior to arranging a transhipment, the Shell Chemical Charterer must be in agreement as to the Owner s proposed plan. Marpol Details: Marpol Annex: II IMO Ship Type: 3 Shell Chemicals requires a ship type 2 IMO Pollution Category: Oil Like: High Viscosity: Solidifying: USCG: Z USCG group 40. t compatible with group 12 Isocyanates 2
Cargo Handling Criteria: Prepurging of Vessel s Tanks: N2 Blanket Required: Percent Oxygen in Nitrogen Blanket: Vapor Space Purge: Yes <5% See Regional requirements Loading Temperature Range: Ambient 40 deg C. Transit Temperature Range: 40 45 deg C. (International) Ambient 45 deg C. (EU Barges) Discharge Temperature Range: 40 50 deg C. (Internatiional) Maximum Heating Coil Temperature: < 90 deg C. Adjacent Maximum Cargo Temperature: 50 deg C. Ambient 50 deg C. (EU Barges) Regional Requirements: See notes tes: For voyages between Amsterdam, Rotterdam, Antwerp, and the UK, no nitrogen blanket required. tes: For barge voyages in Europe Stainless steel required. tes: Inter Europe and UK, no wall wash required. tes: International vessels presenting coated tanks, contact Chemicals MTA. tes: EU barges with prior cargo SC 48-08 can be loaded without cleaning. tes: If Nitrogen blanket is in place and Carrier chooses to transship, carrier must reapply nitrogen blanket on the cargo, both on the discharging and receiving ship, at their time, risk, and expense. 3
Tank Acceptance Requirements: All shore and ship cargo lines and tanks are to be presented clean (residual free), dry, odor free, and rust free, with good gaskets and pressure tested heating coils. Stainless Steel or Coated Tanks : Wall Wash Required: Coated, carrier to verify suitability of coating. for product. See also Regional Requirements notes. Yes for International, see also Regional Requirement notes Wash Specifications: Water Misc. pass Chlorides Max 5ppm Odor residual Permanganate >30 minutes Color max 5 Acidity 0.05 mgkoh/g max. Appearance Clear Maintenance of heating coils is to be verified in the ship s log. If product is to be heated, heating coils are to be confirmed leak free. If product is not heated, heating coils are to be drained, dried and blanked off. Sample testing and Product release/ Acceptance Requirements. Loading: Shore tank approved by location based on local process. Manifold samples tested in the field for appearance only. Product release based on local process. Discharge: Product acceptance based on key tests on arrival samples form each tank based on local process. 4
Safety Information and Incident Reporting. Safety Information: For more detailed information, refer to the SDS or e-sds for reportable spill/release quantities whether in the water, air or ground. Incident Reporting: International Registered Vessels:- If an incident occurs call Shell International Trading and Shipping in London on (44) 207-934-7777. Jones Act Vessels:- If an incident occurs, call the Shell 24 hr. incident number at 713-241-2532. For additional marine cargo handling advice or information, contact Captain Eddie Trotter at (+1 713 241 3535) Shell Chemical LP PO Box 4407 Houston Texas 77210 USA Tel +1 866 897 4355 Internet http://www.shell.com/chemicals Disclaimer The information contained in this publication is, to the best of our knowledge, true and accurate, but any recommendations or suggestions that may be made are without guarantee, since the conditions of use are beyond our control. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use. Shell Chemicals The expression Shell Chemicals refers to the companies of the Shell Group of companies that are engaged in the chemical businesses. Each of the companies that make up the Shell Group of companies is an independent entity and has its own separate identity. 5