Lifting platforms & pallet trucks Vice / work mats Vices With tubular clamping jaws and turntable Vice 12 mm 63012 Vice m 63010 Vice 17 mm 63017 Jaw width Min. clamping width Max. clamping width Clamping depth Anvil size Total length Turntable Drill holes in turntable Ø 100 mm 102 mm 1m 66 mm 73 x 8 mm 30 mm 128 mm 10.3 mm 8.3 kg 12 mm 12 mm 138 mm 82 mm 78 x 73 mm 3 mm 14 mm 13. mm 12.4 kg m 12 mm 1 mm 104 mm 90 x 84 mm 4 mm 16 mm 18.4 kg 17 mm 180 mm 2m 108 mm 104 x 99 mm 30 mm 190 mm 27.4 kg Assembly aid Vice 100 mm 630100 Lifting gear/weighing device Vehicle jacks Transportation aids XXQuality vices opening to the front made of break-proof cast iron XXReplaceable clamping jaws with grooved teeth XXAdjustable guide for parallel clamping XXWith removable pipe-clamping jaws XXLarge, anvil surface for smaller straightening and ramming work XXSpindle guide in housing offers optimum protection against damage and soiling XXFoot rotates continuously through 360 with locking option XXPainted in hammer effect blue Workplace mats For dry and wet areas Power generators XXFire-resistant XXMade of polyurethane on polyether basis XXSurface: nubbed XXUnderside: nubbed for maximum standing comfort and slip resistance XX-year warranty Back Thickness Colour Temperature resistant Fire classification Dimensions 1840 x 640 mm 6800000 1840 x 940 mm 680000 3040 x 640 mm 6800001 3040 x 940 mm 6800006-3 C to +9 C 1840 x 640 mm 6 kg -3 C to +9 C 1840 x 940 mm 9 kg -3 C to +9 C 3040 x 640 mm 10. kg -3 C to +9 C 3040 x 940 mm 1 kg Battery chargers 83 Front Made in Germany
Sandblasting cabinets SSK series Sandblasting cabins for clean blasting work without soiling the work environment XXSuitable for a variety of blasting agents, e.g. quartz, glass peen shot, plastic peen shot, and more XXIdeal for paint removal or for cleaning and rust removal on any type of metal part... XXPremium latex work gloves fastened on housing XXView window and adhesion-bonded protective film, for the best possible view and occupational protection while processing the workpiece XXCover and door frame featuring all-around seals for dust-free work XXWith stable grid shelf for depositing workpieces on the inside of the cabinet XXWith drain opening for changing the blasting agent XXExtraction hose for blasting agent fastened on bottom of catchment container XXWith external compressed air coupling XXGlass bead blasting agent, corundum blasting agent, silicon carbide, plastic blasting agent and many others usable SSK 1 XXCover easily lockable with rotary locks XX12-volt neon tube with 230-volt power supply and external switch Scope of supply: Premium blasting gun with ceramic nozzle > > 4 pcs. ceramic nozzle (4 / / 6 / 7 mm) > > Includes replacement films for view window SSK 2 XXOne large door on the side for loading and unloading XX2 exhaust air openings (1 exhaust air connection ø 92 mm and 1 exhaust air duct ø 64 mm) for connecting to an extraction unit XX12-volt neon tube with 230-volt power supply and external switch SSK 2. XX2 large doors for loading and unloading at both sides, also for longer workpieces XXIntegrated extraction unit with replaceable air filter XXAir flow controlled via foot pedal XX2 blasting guns: one fixed and one freely-movable blasting gun XX3 separate switches for on/off, extraction and cell lighting XX2 neon tubes (230-volt), in separate housing with protective pane and replaceable protective film, including replacement films XXMaximum working pressure controllable via pressure controller with pressure gauge SSK 1 SSK 2 SSK 2. 6204000 6204001 6204003 Cabin volume 90 l 220 l 310 l Air consumption approx. 200 30 l/min 200 30 l/min 200 30 l/min Working pressure 2.8 8.0 bar 2.8 8.0 bar 4.1 8.0 bar Max. inlet pressure 8.6 bar 8.6 bar 8.3 bar Compressed air connection 3/8 3/8 3/8 Abrasive grain size 0.42 mm 0.12 mm 0.42 mm 0.12 mm 0.42 mm 0.12 mm Cabin internal dimensions 80 x 480 x 300 mm 840 x 0 x 360 mm 94 x 60 x 60 mm Exterior dimensions 90 x 48 x 490 mm 90 x 660 x 1380 mm 960 x 900 x 1640 mm 17.2 kg 48 kg 90 kg Max. weight on support grille 10 kg 80 kg 120 kg max. weight of blasting agent 12 kg 0 kg 0 kg Extraction performance - - 7.9 m³/h Accessories for SSK 1 PQ Gloves 6204100 Sand blasting gun 6204101 Filter 6204102 Protective film 6204103 View window 6204104 4//6/7mm 6204130 Fluorescent tube 6204113 84 Accessories for SSK 2 PQ Sand blasting gun 6204101 Gloves 6204110 Protective film 6204111 View window 6204112 Fluorescent tube 6204113 4//6/7mm 6204130 Accessories for SSK 2. PQ Sand blasting gun 6204101 Sand blasting gun fixed 620410 Gloves 6204120 Protective film 6204111 View window 6204122 Fluorescent tube 6204127 Protective pane for lighting 620412 Protective film for lighting 6204126 4//6/7mm 6204130 Sand blasting gun fixed (: 620410)
Lifting platforms & pallet trucks Vehicle jacks Transportation aids Fig. shows SSK 3.1 featuring a very large front flap which opens upward Accessories for SSK 3.1 Gloves Protective film View window Filter 2 x 6 mm /2 x 7 mm Sand blasting gun Protective pane for lighting Protective film for lighting Fluorescent tube PQ 6204120 6204121 6204122 6204123 6204131 6204124 620412 6204126 6204127 SSK 4 6204004 360 l 400 800 l/min 3.4 8.0 bar 8.6 bar 3/8 0.20 0.12 mm 1160 x 80 x 80 mm 122 x 93 x 1640 mm 11 kg 120 kg 7 kg 17.4 m³/h 82 l 400 800 l/min 3.4 8.0 bar 8.6 bar 3/8 0.42 mm 0.12 mm 1160 x 870 x 80 mm 1320 x 1200 x 1760 mm 160 kg 10 kg 7 kg 17.4 m³/h Accessories for SSK 4 Sand blasting gun Gloves Filter Protective film View window Fluorescent tube Protective pane for lighting Protective film for lighting 2 x 6 mm /2 x 7 mm PQ 6204124 6204120 6204123 620411 620410 620412 620414 620413 6204131 Grain sizes usable U.S. mesh Inch 40 0,016 4 0,0139 0 0,0117 60 0,0098 70 0,0083 80 0,0070 100 0,009 120 0,0049 mm 0,420 0,34 0,297 0,20 0,210 0,177 0,149 0,12 µm 420 34 297 20 210 177 149 12 Lifting gear/weighing device Power generators Cabin volume Air consumption approx. Working pressure Max. inlet pressure Compressed air connection Abrasive grain size Cabin internal dimensions Exterior dimensions Max. weight on support grille max. weight of blasting agent Extraction performance SSK 3.1 620400 Fig. shows SSK 4 application Battery chargers SSK 4 XXVery large front hood opens upward for fast and easy loading and unloading XXIntegrated extraction unit with replaceable air filter XXBlasting gun without trigger - air flow controlled via foot pedal XX4 neon tubes (230-volt), in separate housing with protective pane and replaceable protective film, including replacement films XX2 separate switches for on/off, extraction and cell lighting XXMaximum working pressure controllable via pressure controller with pressure gauge XXCross-beams on base allow for easy transport with a pallet truck For matching compressors see the main AIRCRAFT main catalogue, or visit www.aircraft-kompressoren.com 8 SSK 3.1 XXVery large front hood opens upward for fast and easy loading and unloading XXIntegrated extraction unit with replaceable air filter XXBlasting gun without trigger - air flow controlled via foot pedal XX2 neon tubes (230-volt), in separate housing with protective pane and replaceable protective film, including replacement films XXLight switch with dual function: extraction and cabin lighting are switched on and off at the same time XXMaximum working pressure controllable via pressure controller with pressure gauge Assembly aid SSK 3.1/SK 4: Integrated extraction unit with replaceable air filter
Mobile fans MV series Mobile fans for industrial use Application XXExtracting hot air, welding fumes, saw dust, smoke, gases, smells, dust or other contaminated exhaust air XXSupplying fresh air to poorly ventilated places XXUseful for cooling, aerating, drying and ventilating large rooms such as factory shops, workshops, warehouses, building sites, etc. Accessories XXAeration, ventilation and air recirculation, also over longer distances after connecting the air transport hoses available as accessories XXLonger hose distances possible by connecting multiple air transport hoses MV 0 MV 30 XXPortable model with handle XXFour rubber feet, for stability and low vibration MV 60 Basket ø Impeller ø Max. air flow Speed Performance Voltage Dimensions (L x W x H) 86 Accessories Scope of supply MV 30: >> Carrying handle >> 4 rubber feet Scope of supply MV 0: >> 2 steering rollers >> 2 fixed rollers Scope of supply MV 60: >> 2 steering rollers >> 2 fixed rollers MV 30 6260030 MV 0 626000 MV 60 6260060 380 mm 300 mm 3900 m³/h 2800 rpm 00 W 1 kg 420 x 380 x 380 mm 80 mm 00 mm 9000 m³/h 1400 rpm 1100 W 39 kg 670 x 670 x 48 mm 68 mm 600 mm 14400 m³/h 1400 rpm 2000 W 64 kg 770 x 770 x 7 mm Air transport hoses, length Longer hose distances possible by connecting multiple hoses Dimensions Ø 300 mm Ø 00 mm Ø 600 mm 6260130 626010 6260160
Lifting platforms & pallet trucks Radial fans RV series Radial fans with single-side intake and housing for versatile use RV 100: XXPortable, compact radial fan for extraction in the assembly area Transportation aids XXFor extracting dust, chips, smoke, grains, wood and plastic particles, etc. XXHigh efficiency thanks to effective form Vehicle jacks Curved impellers ensure energy saving, low-noise operation MV 12 MV 180 >> Carrying handle >> Base plate Max. air flow Impeller diameter Air exit speed Intake port diameter Outlet diameter Output performance drive motor P2 Motor speed Voltage Sound pressure level Dimensions (L x W x H) Scope of delivery RV 12: >> Baseplate with frame Scope of delivery RV 180: >> Baseplate with frame RV 100 6261100 RV 12 626112 RV 180 6261180 829 m³/h 270 mm 30 m/s 100 mm 127 mm 0.7 kw 280 rpm 68 db(a) 18 kg 411 x 374 x 417 mm 12³/h 29 mm 22 m/s 12 mm m 1.1 kw 280 rpm 400 V/0 Hz 68 db(a) 3 kg 89 x 68 x 40 mm 2044 m³/h 30 mm 28 m/s 17 mm 177.8 mm 1. kw 280 rpm 400 V/0 Hz 70 db(a) 2 kg 712 x 693 x 690 mm Accessories Battery chargers Scope of delivery RV 100: Polyurethane flex-hose, transparent with spiral Nominal width Ø 100 mm for RV 100 Ø 12 mm for RV 12 Ø m for RV 12 Ø 180 mm for RV 180 Length 14203 14209 14206 14211 87 MV 100 Power generators Lifting gear/weighing device Assembly aid MV 12