INDUCTION MOTORS INDUCTION MOTORS THE POWER BEHIND THE DRIVE. Energy Efficient Motors FRAME 63 TO 355 EVERYDAY SOLUTIONS

TH POWR BHIN TH RIV INUCTION MOTORS FRAM 63 TO 355 LOW TNSION TFC INUCTION MOTORS INUCTION MOTORS nergy fficient Motors VRYAY SOLUTIONS

SPOTLIGHTS TFC CAG MOTORS nergy fficiency level 2 as per IS:12615 nergy fficiency as per CMP Standards prevalent in urope Sleek and compact design, Improved aesthetics 'V' seal arrangement up to 355 frame - asier assembly of bearing housing Integral bearing cover with endshield up to 225 frame Larger terminal box for accommodating bigger Aluminium cables Sophisticated CNC Machines, Most Advanced Manufacturing Technology & Test Plant - Improved reliability. STANAR SPCIFICATIONS RANG.18 kw to 35 kw (FRAM 63 to 355) Multi speed options are also available VOLTAG 415 V +/- 1 % FRQUNCY 5 Hz +/- 5 % COMBIN VARIATION INSULATION +/- 1 % (ABSOLUT SUM) Class 'F' (Temp. rise limited to class 'B' ) as standard MOUNTING Horizontal foot mounting (B3 ) as per IS :1231. AMBINT / TMPRATUR 5 C / 7 C RIS GR OF PROTCTION IP55 AS PR IS: 4691 1

BARINGS & TRMINAL BOX TAILS BARING SIZ CHART FRAM SIZ BARING N BARING S63 621ZZ 621ZZ S71 623ZZ 623ZZ S/N8 624ZZ 624ZZ S/N9S/L 625ZZ 625ZZ S1L 626ZZ 626ZZ N1L 626ZZ 625ZZ @ S/N112M 636ZZ 625ZZ @ N/NC132 S/M 638ZZ 628ZZ S132 S/M 638ZZ 635ZZ N16M/L 639 2Z 629 2Z N18M 631 2Z 631 2Z N2L 6312 2Z 6312 2Z N225M 6313 2Z 6313 2Z N25M - 2P 6314 - C4 6314 - C4 N25M 4P UP 6314 - C3 6314 - C3 N28S/M 2P POL 6314 - C4 6314 - C4 N28S/M 4P & UP 6318 - C3 6318 - C3 N315M/L-2 POL 6315 - C4 6315 - C4 N315L 4P & UP 6319 - C3 6319 - C3 N355S/M/L/LX 2P 6316 - C4 6316 - C4 N355S/M/L 4P UP 6321 - C3 6321 - C3 N355LX 4P UP 6322 - C3 6322 - C3 @ For single shaft extension. For double shaft extension-bearing Size-626 ZZ. Bearing clearance-motors upto 132M FRAM have normal clearance bearings. TRMINAL BOX : TFC FRAM MAXIMUM NO. OF TRMINAL BSC CABL SIZ MAIN STU SIZ NTRY OL STAR/LTA TRMINALS MAIN ARTH NOS. SIZ S63-S71 4CX4mm2-6 M5 M4 1 ¾ S8 * 4CX4mm2-6 M5 M4 2 ¾ N8 4CX4mm2-3 M5 M4 1 ¾ N9S-N132M 4CX1mm2 4CX1mm2 6 # M6 M5 OL-1 S/-2 1 S9S-S1L 4CX1mm2-6 M6 M5 1 1 NC132S/M 4CX1mm2 4CX1mm2 6 M6 M5 OL-1 S/-2 1 N16-N2 3CX5mm2 2X3 C X35mm2 6 M6 M8 2 1 N225 TO N28 3CX12mm2 2X3C X95mm2 6 M8 M12$ 2 1 ½ N315S/M/L 3CX3mm2 2X3 C X 24mm2 6 M12 M12 2 2 N355L/LX 3C x 4 mm2 2 x 3C x 3 mm2 6 M16 M12 2 2.5 * INTGRAL TRMINAL BOX # 3 LAS UPTO 2.2 kw2 P/4P & 1.5 kw 6P/8P and below, 6 leads for 2.2 kw 6P/8P & above (For N Frame only) $ M12 FOR 25/28 FRAM & M8 FOR N225 FRAM 2

PRFORMANC ATA PRFORMANC ATA 3 - PHAS TFC SCR INUCTION MOTOR VOLTAG : 415 ± 1% V TYP : SQUIRRL CAG (SCR) AMBINT : 5 G C FRQUNCY : 5 ± 5% Hz RATING : CONTINUOUS TMP. RIS(R) : 7GC COMBIN : ± 1 % (ABSOLUT) INSULATION : CLASS 'F' WITH CLASS 'B' GR OF : IP55 VARIATION TMP. RIS PROTCTION OUTPUT P FRAM FL FLC FLT FFICINCY (%) POWR FACTOR OL STG. POT G. 2 NT O SIZ RPM AMPS. Kg-m FL 3/4 1/2 FL 3/4 1/2 STG.T STG.C % FLT KGM. 2 WT. kw HP L LOA LOA LOA LOA % FLT % FLC kg.18.25 2 S63 27.6.6 64. 62. 58..79.68.59 3 5 35.1 5.6 4 S63 133.6.13 64. 62. 58..79.73.6 2 4 25.3 5.6 6 S71 9.64.19 61. 64. 6..68.6.5 2 4 25.4 7..25.33 2 S63 27.65.9 68. 67. 63..79.72.6 275 5 325.1 5.6 4 S71 135.73.18 68. 67. 63..7.64.54 225 4 275.4 7. 6 S71 89 1.2.27 6. 55. 48..6.5.4 18 4 225.4 7. 8 S/N8 67 1.1.36 52. 46. 36..5.42.32 17 4 2.11 1/17.37.5 2 S71 282.95.13 71.5 7. 66..79.75.68 275 5 325.2 7. 4 S71 14 1.12.26 71.5 7. 66..65.6.53 225 5 275.4 7. 6 S/N8 91 1.5.4 69. 68. 66..71.63.52 21 4 25.11 1/17 8 S/N9S 68 1.4.53 65. 64. 6..57.5.4 17 4 22.15 13/22.55.75 2 S71 28 1.3.19 73. 72. 68..81.76.71 275 5 3.2 7. 4 S/N8 141 1.45.38 73. 73. 69.5.73.67.54 2 5 25.7 1/17 6 S/N8 91 1.55.59 69. 68. 66..71.63.52 2 4 26.11 1/17 8 S/N9L 68 1.75.79 69. 68. 64..63.54.45 15 4 2.21 13/22.75 1. 2 S/N8 282 1.65.26 77. 76. 74..81.73.62 25 6 3.3 1/17 4 S/N8 141 1.75.52 77. 76. 74..78.75.64 2 5 25.7 1/17 6 S/N9S 935 2..78 73. 71. 69..72.65.58 2 4 25.15 13/22 8 S/N1L 7 2.55 1.4 7. 69. 64..58.51.41 175 4 225.3 19/32 1.1 1.5 2 S/N8* 282 2.35.38 79. 78. 76..82.77.7 225 6 275.4 1/17 4 S/N9S 1415 2.5.76 78. 76. 74..78.75.64 2 5 25.14 13/22 6 S/N9L 935 2.85 1.15 76. 76. 74..72.66.58 2 5 25.21 16/25 8 S1L/ 7 3.3 1.53 72.5 71. 68..63.54.44 175 4 225.34 19/35 N1L 1.5 2. 2 S/N9S 283 3.1.52 8. 79. 77..82.77.7 225 6 275.6 13/22 4 S/N9L 1415 3.2 1.3 8. 79. 77..81.78.71 2 5 25.19 16/25 6 S/N1L 935 3.7 1.56 78. 78. 76..72.66.58 2 4 25.3 19/32 8 S112M/ 7 4. 2.9 77. 77. 75..68.6.52 19 4 24.57 29/45 N112M 2.2 3. 2 S/N9L 283 4.6.76 81. 8. 78..82.77.7 25 6 3.8 16/25 4 S/N1L 144 4.5 1.49 82. 81. 79..82.78.72 2 6 25.3 19/32 6 S/N112M 935 5.1 2.29 8. 8. 78..75.71.63 2 5 25.48 29/42 8 S/N132S 71 5.4 3.2 78. 78. 76..73.68.61 18 45 23.174 42/68 3. 4. 2 S/N1L 2865 6. 1.3 83. 82. 8..85.81.73 25 6 3.22 19/32 4 S/N1L 1425 6.1 2.5 83. 82. 8..82.78.72 2 6 25.34 19/36 6 S/N132S 94 6.3 3.1 84. 83. 8..79.75.68 2 5 25.174 42/68 8 S/N132M 71 7. 4.17 8. 79. 77..74.7.62 17 5 22.214 45/79 3.7 5. 2 S/N1L 284 7.2 1.25 84.5 84.3 82..85.81.73 25 6 3.22 19/36 4 S/N112M 143 7.4 2.5 85. 85. 83..82.78.72 2 6 25.52 29/42 6 SN132S 95 7.7 3.79 85. 84. 82..79.73.63 2 6 25.174 42/68 8 S/N132M 71 8.4 5.8 83. 83. 81..74.7.62 18 6 23.214 45/79 5.5 7.5 2 N112M* 288 1. 1.86 86. 86. 84..89.85.8 25 65 3.34 45. 2 S132S 2865 1.5 1.86 86. 85. 83..85.82.76 2 6 3.34 42. 4 S/N132S 145 1.1 3.69 86. 85. 83..88.85.75 225 6 275.131 42/68 6 S/N132M* 95 11.3 5.64 85. 84. 82..8.75.68 2 6 25.214 45/79 7.5 1. 2 S/N132S 288 13.3 2.53 88. 88. 86..89.85.8 25 6 3.62 45/68 4 S/N132M 1455 13.6 5.2 87. 86. 84..88.85.75 225 6 275.161 45/79 9.3 12.5 2 N132M 289 16.7 3.13 88. 87. 85..89.85.8 25 7 3.76 79. 9.3 12.5 4 N132M 146 17.5 6.25 88.5 88.5 86.5.84.81.73 2 6 25.31 82. 3

PRFORMANC ATA OUTPUT P FRAM FL FLC FLT FFICINCY (%) POWR FACTOR OL STG. POT G. 2 NT O SIZ RPM AMPS. Kg-m FL 3/4 1/2 FL 3/4 1/2 STG.T STG.C % FLT KGM. 2 WT. kw HP L LOA LOA LOA LOA % FLT % FLC kg 3.7 5. 8 N16M 71 8. 5.8 83. 83. 81..74.7.62 15 5 2.46 12 4. 5.5 8 N16M 71 8. 5.48 83. 83. 81..74.7.62 15 5 2.46 121 5.5 7.5 6 N16M 97 11. 5.52 86. 86. 84..8.76.68 2 55 25.46 12 8 N16M 71 12. 7.55 85. 85. 83..74.7.62 15 5 2.46 12 7.5 1. 4 N16M 146 14. 5. 87. 87. 85..85.81.73 225 6 275.31 12 6 N16M 975 15. 7.49 87.5 87. 85..8.76.68 2 55 25.46 12 8 N16L 71 16. 1.29 85. 85. 83..76.72.64 15 5 2.64 146 9.3 12.5 6 N16L 975 18. 9.29 87.5 87. 84..8.76.68 2 55 25.59 146 8 N18M 72 2. 12.58 86. 86. 84..74.7.6 175 5 225.99 174 11 15 2 N16M 292 2. 3.67 89. 88. 86..88.86.78 25 65 3.13 12 4 N16M 146 21. 7.34 89. 89. 86..82.79.7 2 6 25.36 12 6 N16L 975 22. 1.99 88. 87.5 86..8.76.68 2 55 25.64 146 8 N18L 72 24. 14.88 87. 87. 85..74.7.6 175 5 225 1.16 25 15 2 2 N16M 292 26. 5. 89.5 89.5 87.5.88.86.79 25 65 3.17 12 4 N16L 146 27. 1.1 9. 9. 88..85.83.75 2 6 25.47 146 6 N18L 975 29. 14.98 9. 9. 88..79.73.66 225 6 275 1.16 25 8 N2L 725 33. 2.15 88.5 88.5 86.5.71.65.55 225 5 275 2.14 27 18.5 25 2 N16L 292 32. 6.17 9. 9. 88..88.86.79 275 65 325.21 146 4 N18M 1475 33. 12.22 92. 92. 9..84.8.72 2 6 25.81 17 6 N2L 975 34. 18.48 91.1 91.1 89.9.84.82.73 2 55 25 1.69 27 8 N225S 725 39. 24.85 89. 89. 87..75.71.63 175 5 225 3.24 345 22 3 2 N18M 293 41. 7.31 91. 91. 89..83.8.72 225 6 275.44 164 4 N18L 1475 4. 14.53 92. 92. 9..84.8.72 2 6 25.95 25 6 N2L 975 4. 21.98 91.5 91.5 9.1.84.82.78 2 55 25 2.4 27 8 N225M 725 46. 29.56 89. 89. 87..75.71.63 175 55 225 3.61 375 3 4 2 N2L 295 51. 9.91 91.5 91.5 9..9.89.87 2 6 25.8 27 4 N2L 1475 51. 19.81 92. 92. 9.2.89.86.78 25 6 3 1.62 27 6 N225M 98 53. 29.82 92. 92. 9.5.85.82.73 2 55 25 3.61 375 8 N25M 735 61. 39.76 91. 9.5 88.5.75.71.63 175 55 225 4.82 465 37 5 2 N2L 295 62. 12.22 92.5 92. 9..9.89.87 2 6 25.89 27 4 N225S 148 63. 24.35 92.5 92.5 91.6.89.86.78 25 6 3 2.64 345 6 N25M 98 66. 36.77 93. 93. 92..84.81.72 25 6 3 4.82 465 8* N25M 735 76. 49.3 9.5 9.5 88.5.75.71.63 2 5 25 4.82 5 8 N28S 735 75. 49.3 91.5 91.5 89.5.75.71.63 2 5 25 8.1 6 45 6 2 N225M 2955 73. 14.83 92.6 92. 9..94.92.88 225 65 275 1.87 375 4 N225M 148 76. 29.61 93. 93. 91.5.89.86.78 25 6 3 3.13 375 6* Nd25m 98 76. 44.72 93. 93. 91..84.81.72 25 6 3 4.82 5 6 N28S 98 79. 44.72 93. 93. 91..85.82.73 25 6 3 8.1 6 8 N28M 725 91. 6.46 92. 92. 9.5.75.71.63 175 5 225 9.89 63 55 75 2 N25M 2955 87. 18.13 93.5 93. 9.5.94.92.88 175 6 225 1.79 465 4 N25M 1475 92. 36.32 93.5 93.5 92..89.86.82 2 6 25 3.45 465 6 N28M 98 95. 54.66 93.5 93.5 92.5.86.82.74 175 6 225 9.89 63 8* N28M 735 11. 72.88 92.5 92.5 91..75.71.63 175 6 225 9.89 7 8 N315S 74 113. 72.39 93. 93. 91.5.73.66.56 2 55 3 14.12 9 75 1 2* N25M 2955 88. 24.72 93.7 93. 91.3.94.92.88 175 6 225 2.79 5 2 N28S 2975 124. 24.55 93.6 93.5 92..9.86.78 225 6 275 2.79 6 4* N25M 1475 125. 49.53 93.5 93.5 92..89.86.82 2 6 25 3.8 52 4 N28S 148 123. 49.36 94. 94. 2.5.9.88.84 25 6 3 7.21 6 6* N28M 98 129. 74.54 93.8 93.8 92.5.86.82.74 175 6 225 9.89 7 6 N315S 987 129. 74.1 94. 94. 92.5.83.8.72 25 6 3 14.12 9 8 N315M 74 153. 98.72 93.5 93.5 91.5.73.66.56 2 6 25 18.98 95 9 12 2 N28M 2975 148. 29.47 94.2 94. 92.5.9.86.78 225 6 275 3.4 63 4 N28M 148 147. 59.23 94.5 94.5 92.5.9.88.84 25 6 3 8.26 63 6 N315M 987 155. 88.81 94.2 94.2 93.5.85.82.71 225 6 275 17. 95 8* N315M 74 171. 118.46 94. 94. 92..78.74.66 25 6 3 16.99 113 8 N315L 74 178. 118.46 94. 94. 92..76.72.64 2 5 25 29.85 113 4

PRFORMANC ATA OUTPUT P FRAM FL FLC FLT FFICINCY (%) POWR FACTOR OL STG. POT G. 2 NT O SIZ RPM AMPS. Kg-m FL 3/4 1/2 FL 3/4 1/2 STG.T STG.C % FLT KGM. 2 WT. kw HP L LOA LOA LOA LOA % FLT % FLC kg 11 15 2 N315S 2965 173. 36.13 94. 94. 92.5.94.91.84 2 6 25 5.82 9 4* N28M 148 18. 72.39 94.3 94.3 92.3.9.86.78 25 6 3 8.26 66 4 N315S 1485 176. 72. 94.5 94.5 92..92.88.8 225 6 275 11.62 9 6 N315M 987 188. 18.55 94.5 94.5 93.5.86.82.72 2 6 25 18.98 95 8* N315M 74 29. 131.62 94. 94. 92..78.74.66 2 25 25 29.85 12 8 N315L 74 217. 144.78 94.2 94. 92..75.72.68 25 6 3 29.85 113 132 18 2 N315M 2965 28. 43.36 94.8 94. 92.5.94.9.82 2 6 25 7.97 95 4 N315M 1485 21. 86.4 95. 95. 94..92.88.8 225 6 275 13.9 95 6 N315L 985 226. 13.53 95. 94.5 93.5.86.82.74 25 6 3 29.85 113 8 N315L 74 259. 173.74 94.5 94.5 92.5.75.72.68 225 6 275 29.85 113 15 2 2 N315L 2975 235. 49.11 95. 94.5 92.5.94.92.9 175 6 225 16.37 113 4 N315M 1488 239. 98.19 95.2 95. 94..92.88.8 225 6 275 15.61 95 6 N315L 99 257. 147.58 95. 94.5 93.5.86.82.74 25 6 3 29.85 113 8 N355L 74 296. 197.43 95. 93. 91..75.72.68 15 6 2 33.16 21 16 215 2 N315L 2975 249. 52.38 95. 94.5 93.5.94.92.9 175 6 225 16.37 113 4 N315L 149 26. 14.59 95.3 95.3 94..9.86.78 2 6 25 24.97 113 6 N315L 99 273. 157.41 95. 94.5 93.5.86.82.74 25 6 3 29.85 113 8 N355L 74 316. 21.59 95. 93. 91..75.72.68 175 6 225 36.73 21 18 24 2 N315L 2975 28. 58.93 95. 94.5 93.5.94.92.9 2 6 25 16.37 113 4 N315L 149 293. 117.66 95.3 95. 94..9.88.84 225 6 275 24.97 113. 6 N355L 99 315. 177.9 95. 93.5 91..84.81.72 225 6 275 33.16 21 8 N355LX 745 353. 235.33 95. 94.5 92.5.75.72.68 135 5 185 61.4 215 2 27 2 N315L 2975 31. 65.48 95.5 95.5 94..94.92.9 2 6 25 16.37 113 4 N315L 149 324. 13.74 95.5 95.5 94..9.88.84 225 6 275 24.97 113 6 N355LX 991 351. 196.57 95. 94. 91..84.81.72 15 6 2 55.26 215 8 N355LX 745 43. 261.48 94.5 94.5 92.5.73.66.56 135 5 185 61.4 215 225 32 2 N355L 298 341. 73.54 95.5 95.5 94..96.92.88 175 6 225 25.7 21 4 N355L 149 372. 147.8 95.5 95.5 94..88.86.82 185 6 235 35.57 21 6 N355LX 991 394. 221.14 94.5 94.5 92..84.81.73 15 6 2 61.4 215 8 N355LX 745 454. 294.16 94.5 94.5 92.5.7.64.6 135 5 185 61.4 215 25 335 2 N355LX 298 379. 81.71 95.5 95. 93.5.96.92.88 175 65 225 25.7 215 4 N355L 149 413. 163.42 95.7 95.7 94.5.88.86.82 185 6 235 35.57 21 6 N355LX 993 434. 245.22 95.5 95. 94..84.81.73 15 6 2 61.4 215 275 369 2 N355LX 298 417 89.88 95.5 95. 93.5.96.92.88 175 65 225 25.7 215 4 N355LX 149 454 179.76 95.7 95.7 94.5.88.86.82 185 6 235 35.57 215 6 N355LX 99 477. 27.56 95.5 95. 94..84.81.73 15 65 2 39.52 215 315 425 2 N355LX 298 478. 12.96 95.5 95.5 94..96.92.88 2 6 25 3.7 215 4 N355LX 1492 496. 25.64 96. 96. 94.5.92.9.88 175 6 225 39.52 215 35 47 2* N355LX 298 543. 114.39 95.5 95.5 93.5.94.9.86 175 7 225 3.38 215 35 4* N355LX 1485 557. 229.56 95 95 93.92.9.88 15 65 2 39.52 215 OUTPUT P FRAM FL FLC FLT FFICINCY (%) POWR FACTOR OL STG. POT G. 2 NT O SIZ RPM AMPS. Kg-m FL 3/4 1/2 FL 3/4 1/2 STG.T STG.C % FLT KGM. 2 WT. kw HP L LOA LOA LOA LOA % FLT % FLC kg 1.1 1.5 2 S/N9S 283 2.3.4 77. 72. 64..82.76.68 25 6 3.6 13/22 5.5 7.5 2 N132S 2865 1.5 1.9 84. 82. 79..89.84.76 25 6 3.62 68 NOT : All performance figures are subject to tolerances as per IC - 34 or IS 325-1996. FL - Full Load, STG = Starting, C - Current,T-Torque, OL - irect on line, S/ - Star/elta * With class 'F' temperature rise. (9 C rise) 5

IMNSIONAL RAWINGS OF MOTORS G OUTLIN IMNSION RAWING FOR 3 PHAS SQUIRRL CAG TFC FOOT MOUNT ALUMINIUM BOY INUCTION MOTORS FOR S63 TO S132 FRAMS N9/h9 F X L CABL NTRY SCRW FOR KK BS CONUIT FOR CABL GLAN X AC ACφ H G GA G H TAPP HOL Y x P BA C B 4 HOLS OF K X LT AA A HA BB AB KY KY WAY SHAFT FIXING ON GR. RANG TOL. K H14 6 to1 12 H - ALL G - F N9 F h9 G 6 to1 -.36 +.43 -.5 +.7 -.2 j6 1 to18 +.8 -.3 18 to3 +.9 -.4 k6 3 to5 +.18 +.2 upto 3.5 +.1 4 & +.2 ABOV 4to6 +.3 8 to1 -.36 upto +.2 3 3 to 8.3 3 to6 -.3 h9 3to6 6to1 -.36 -.3 h11 6to1 -.9 FRAM FOOT FIXING SHAFT AN KY YxP OVRALL(MAX) KK SIZ A B C H AA AB BA BB HA K LT F G GA G G X AC L H S63 1 8 4 63 25.5 122 3 96 9 7Æ - 11 23 18 4 8.5 12.5 4 2.5 2.5 M4 x 1 125 21 16 3/4" S71 112 9 45 71 3 136 3 11 9 7Æ - 14 3 25 5 11 16 5 3 2.5 M5 x 12.5 145 25 17 3/4" S8 125 1 5 8 28 152 35 125 11 1 14 19 4 27 6 15.5 21.5 6 3.5 - M6 x 16 165 285 2 3/4" S9S 14 1 56 9 4 17 3 126 13 1 15 24 5 36 8 2 27 7 4 - M8 x 19 18 31 S9L 125 151 335 226 1" S1L 16 14 63 1 48 192 35 17 13 12 16 28 6 44 8 24 31 7 4 - M1x22 2 36 245 1" S112M 19 14 7 112 5 222 35 17 13 12 16 28 6 44 8 24 31 7 4 - M1x22 222 38 27 1" S132S 216 14 89 132 52 252 55 178 13 S132M 178 216 12 16 38 8 6 1 33 41 8 5 - M12x28 26 475 31 1" 1. IMNSIONS COMPLY WITH IS : 1231 AN AR IN MM., XCPT CONUIT NTRY. 2. TRMINAL BOX CAN B TURN THROUGH 36 IN STP OF 9, XCPT FOR FRAM S8 WHICH HAS TRMINAL BOX INTGRAL WITH BOY & CABL NTRY ON ITHR SI. 3. S63 & S71 KY WAY IS CLOS WHIL FOR S8 AN ABOV FRAMS KYWAY IS OPN ON SHAFT. 4. ALL IMNSIONS AR SUBJCT TO CONFIRMATION. 5. PLASTIC T.B. IS US FOR S63 TO S8 FRAM, AN AL T.B. FOR S9 TO S132 FRAM. S635 6

OUTLIN IMNSION RAWING FOR 3 PHAS SQUIRRL CAG TFC FLANG MOUNT ALUMINIUM BOY INUCTION MOTORS FOR S63 TO S132 FRAMS G N9/h9 F A X R L LB CABL NTRIS SCRW FOR KK BS CONUIT FOR CABL GLAN X φ N ACφ G GA TAPP HOL Y x P G 45 4 HOLS RILL S QUALLY SPAC ON M IA CIRCL φ P T LA KY KY WAY SHAFT FLANG FIXING ON GR. RANG TOL. Upto +.3 M 265 -.3 12 to +.14 N j6 G - F N9 F h9 G 18 -.11 18 to +.16 25 -.13 6 to1 +.7 -.2 j6 1 to18 +.8 -.3 18 to3 +.9 -.4 k6 3 to5 +.18 +.2 upto 3.5 +.1 4 & +.2 above 4to6 +.3 8 to1 -.36 upto +.2 3 3 to 8 +.3 3 to6 -.3 h9 3to6 6to1 -.36 -.3 h11 6to1 -.9 FRAM FLANG FIXING SHAFT AN KY YxP OVRALL(MAX) SIZ M N P R S T LA F G GA G G X AC L LB A KK S63 115 95 14 1 3 9 11 23 18 4 8.5 12.5 4 2.5 2.5 M4x1 125 22 197 1 3/4" S71 13 11 16 1 3.5 9 14 3 25 5 11 16 5 3 2.5 M5x12.5 145 25 22 1 3/4" S8 165 13 2 12 3.5 1 19 4 27 6 15.5 21.5 6 3.5 - M6x16 165 285 245 12 3/4" S9S 165 13 2 12 3.5 1 24 5 36 8 2 27 7 4 - M8x19 18 31 26 14 S9L 335 285 1" S1L 215 18 25 15 4 11 28 6 44 8 24 31 7 4 - M1x22 2 36 3 15 S112M 222 38 32 158 1" S132S 265 23 3 15 4 11 38 8 6 1 33 41 8 5 - M12x28 26 475 395 178 1" S132M 1. IMNSIONS COMPLY WITH IS : 2223 AN AR IN MM. XCPT CONUIT NTRY. 2. TRMINAL BOX CAN B TURN THROUGH 36 IN STP OF 9, XCPT FOR FRAM S8 WHICH HAS TRMINAL BOX INTGRAL WITH BOY & CABL NTRY ON ITHR SI. 3. S63 & S71 KY WAY IS CLOS WHIL FOR S8 AN ABOV FRAMS KYWAY IS OPN ON SHAFT. 4. ALL IMNSIONS AR SUBJCT TO CONFIRMATION. 5. PLASTIC T.B. IS US FOR S63 TO S8 FRAM, AN AL T.B. FOR S9 TO S132 FRAM. S634 7

G OUTLIN IMNSION RAWING FOR 3 PHAS SQUIRRL CAG TFC FOOT MOUNT CAST IRON BOY INUCTION MOTORS FOR N9 TO N132 FRAMS AC TAPP HOL Y xp N9/h9 F L NO YBOLT FOR N9S/L H A G GA G C B BB BA CABL NTRY SCRW FOR KK CONUIT HC HA AA A AB H 4 HOLS K IA KY KY WAY SHAFT FIXING ON GR. RANG TOL. K H14 12 H - ALL G - F N9 6 to1 -.36 +.43 -.5 +.7 -.2 j6 1 to18 +.8 -.3 18 to3 +.9 -.4 k6 3 to5 +.18 +.2 upto 3.5 +.1 - F h9 G 1 4 & +.2 above 4to6 +.3 8 to1 -.36 upto +.2 3 3 to 8 +.3 3 to6 h9 3to6 -.3 6to1 -.36 -.3 h11 6to1 -.9 FRAM FOOT FIXING SHAFT AN KY OVRALL(MAX) SIZ A B C H AA AB BA BB K F G GA G G YxP A AC L HC H HA KK N8 125 1 5 8 35 152 45 124 1 19 4 27 6 15.5 21.5 6 3.5 M6 x 16 134 17 285 165-11 3/4" N9S 14 1 56 9 35 168 4 127 1 24 5 36 8 2 27 7 4 M8 x 19 15 195 315 185 N9L 125 152 34-13 1" N1L 16 14 63 1 36 192 45 17 12 28 6 44 8 24 31 7 4 M1 x 22 16 215 38 25 25 13 1" N112M 19 14 7 112 36 222 5 17 12 28 6 44 8 24 31 7 4 M1 x 22 17 235 45 23 275 13 1" N132S 216 14 89 132 48 254 54 178 12 38 8 6 1 33 41 8 5 M12 x 28 19 275 47 27 32 16 N132M 178 216 51 1" 1. IMNSIONS COMPLY WITH IS : 1231 AN AR IN MM., XCPT CONUIT NTRY. 2. TRMINAL BOX CAN B TURN THROUGH 36 IN STP OF 9 3. CABL NTRY : 1 No. FOR OL STARTING & TWO Nos. FOR STAR LTA STARTING/MULTISP MOTOR 4. TRMINAL BOX ON LFT HAN SI LOOKING FROM RIVING N CAN B PROVI WHN SPCIFI. 5. ALL IMNSIONS AR SUBJCT TO CONFIRMATION. N85 8

OUTLIN IMNSION RAWING FOR 3 PHAS SQUIRRL CAG TFC FLANG MOUNT CAST IRON BOY INUCTION MOTORS FOR N9 TO N132 FRAMS TAPP HOL Y xp G N9/h9 F HB A 45 N SPIGOT R L LB NO YBOLT FOR N9S / L AC G GA G 4 HOLS RILL S QUALLY SPAC ON M IA CIRCL P CABL NTRY SCRW FOR 1 BS CONUIT FOR CABL GLAN T LA KY KY WAY SHAFT FIXING N.3.3 12 to +.14.11.16 -.13 +.7 -.2.8.3.9.4 +.18 3 to 5 +.2.1.2 +.2 3 GR. RANG TOL M Upto + 265 - N j6 18-18 to + 25 6to1 + j6 1 to 18 - + 18 to 3 - k6 + upto 3.5 + G - 4 & + above F N9 4to6 +.3 8to1 -.36 upto - 3 +.3 to 8 3to6 F h9 -.3 G 6to1 -.36 h9 3to6 -.3 h11 6to1 -.9 FRAM FLANG FIXING SHAFT AN KY OVRALL(MAX) SIZ M N P R S T LA F G GA G G YxP A AC L LB HB KK N8 165 13 2 12 3.5 1 19 4 27 6 15.5 21.5 6 3.5 M6 x 16 134 17 285 245-3/4" N9S 165 13 2 12 3.5 1 24 5 36 8 2 27 7 4 M8x19 15 19 335 285 N9L 36 31-1" N1L 215 18 25 15 4 11 28 6 44 8 24 31 7 4 M1x22 16 21 38 31 32 15 1" N112M 215 18 25 15 4 11 28 6 44 8 24 31 7 4 M1x22 17 23 45 33 345 16 1" N132S 265 23 3 15 4 14 38 8 6 1 33 41 8 5 M12x28 19 27 47 39 N132M 51 43 19 1" 1. IMNSIONS COMPLY WITH IS : 1231 AN AR IN MM., XCPT CONUIT NTRY. 2. TRMINAL BOX CAN B TURN THROUGH 36 IN STP OF 9 3. CABL NTRY : 1 No. FOR OL STARTING & TWO Nos. FOR STAR LTA STARTING/MULTISP MOTOR 4. TRMINAL BOX ON LFT HAN SI LOOKING FROM RIVING N CAN B PROVI WHN SPCIFI. 5. ALL IMNSIONS AR SUBJCT TO CONFIRMATION. N84 9

OUTLIN IMNSION RAWING FOR 3 PHAS SQUIRRL CAG TFC FOOT MOUNT INUCTION MOTORS FOR N16 TO N355 FRAMS Y THRA CNTR HOLS AS PR IS : 254-1963 N9/h9 F G +. -.5 CABL IVIING BOX FOR N225 ONWARS (OPTIONAL) L + 5 AUX TRM BOX FOR SPAC HATR/ THRMISTOR ABOV 225 FRAM ONLY WHN RQ AC A G H H +.5 C+ 1. B +.5 B1+.5 BA AA BB A +.5 AB CABL NTRY SCRW FOR KK BSC THRA 4 - HOLS K IA ARTHING TRMINALS OF M12 FOR 25-355 FRAMS AN M8 FOR OTHR FRAMS NOT: CABL NTRY CAN B TURN TO ANY ON OF THR POSITIONS AT 9 INTRVALS. ALL IMNSIONS AR IN mm HA FRAM FOOT FIXING SHAFT AN KY# OVRALL SIZ A B B1 C H TOL AA AB BA BB KTOL TOL F TOL GTOL G Y A AC L H HA KK N 16 M 21-16. 254 15.5 42.18 12. 8. 37. 65 N 16 L 254 18 73 38 76 11 8 275 318 254-159.7 298 15. 42.2 11.957 7.91 36.8 65 376 22 N 18 M 241-18. 286 15.5 48.18 14. 9. 42.5 677 N 18 L 279 121 84 348 95 11 8 295 352 279-179.7 323 15. 48.2 13.957 8.91 42.3 715 418 22 N 2 L 318 35-133 2. 19.5 55.3 16. 1. 49. 199.5 66 381 115 356 19. 55.11 11 8 15.957 9.91 48.8 345 428 85 48 25 N 225S - 225. 19.5 6.3 18. 11. 53. 855 N 225M 356 286 311 149 224.5 7 425 12 375 19.5 6.11 14 11 17.957 1.91 52.8 375 47 88 534 25 N 25S 311-25. 24.5 65.3 18. 11. 58. N 25M 46-349 168 249.5 8 483 135 419 24. 65.11 14 11 17.957 1.91 57.8 45 5 94 598 32 N 28S - 28. 24.5 75.3 2. 12. 67.5 43 135 N 28M 457 368 419 19 279. 1 538 167 487 24. 75.11 14 11 19.948 11.91 67.3 515 536 185 642 35 N 315S 46-315. 28.5 8.3 22. 14. 71. 118 N 315M 58-457 216 314. 11 597 164 533 28. 8.11 17 14 21.948 13.91 7.8 51 588 123 725 38 315. 28.5 9.35 25. 14. 81. N 315L 58 58-216 314. 11 61 23 74 28. 9.13 17 14 24.948 13.91 8.8 57 655 1375 755 35 N 355S 5 - N 355M 61-56 254 355. 28.5 1.35 28. 16. 9. 354. 11 71 253 745 28. 1.13 21 16 27.948 15.89 89.8 56 672 1513 76 4 N 355L N 355LX 63 - # ABOV 2 FRAM MACHINS RUNNING AT 3 SYN RPM HAV SMALLR SHAFTS AS SHOWN HR 25 88 6 72 157 827 FRAM L SIZ TOL F TOL G TOL G S M L LX N 225 55.3/55.11 11 8 16./15.957 1./9.91 49./48.8 825 85 - - N 25 6.3/6.11 14 11 18./17.957 11./1.91 53./52.8 94 94 - - N 28 135 185 - - N 315 65.3/65.11 14 11 18./17.957 11./1.91 58./57.8 115 12 - - N 315 7.3/7.11 14 11 2./19.948 12./11.91 62.5/62.3 - - 1345 - N 355 75.3/75.11 17 14 2./19.948 12./11.91 67.5/67.3 1473 1473 1473 153 N165 M24x5 M2x4 M16x32 2Nos-1" 2Nos-1.5" 2Nos-2.5" 2Nos-2" 1

OUTLIN IMNSION RAWING FOR 3 PHAS SQUIRRL CAG TFC FLANG MOUNT INUCTION MOTORS FOR N16 TO N355 FRAMS 4-HOLS FOR FRAM 16-2 8 HOLS FOR FRAM 225-355 RILL Ø 'S' ON 'M' P. C.. QUALLY SPAC AS SHOWN A CONCNTRICITY AUX. TRM BOX FOR SPAC HATR/THRMISTR ABOV 225 FRAM ONLY WHN RQ. Y BOLT FOR VRTICALLY MOUNT MOTORS ABOV 225 FRAM ONLY L+ 5 LB T ALL IMNSIONS AR IN mm N9M/h9 Ø F G G HB 45 22.5 A1 ØP Ø N SPIGOT PRPNICULARITY 'Y'-THRA CNTR HOL AS PR IS:254-1963 +. -.5 NOT:- CABL NTRY CAN B TURN TO ANY ON OF THR POSITIONS AT 9 INTRVALS () + +2 LA CABL NTRY SCRW FOR 'KK' CONUIT AC CABL IVIING BOX FOR N225 ONWARS (OPTIONAL) FRAM FLANG FIXING SHAFT AN KY# OVRALL SIZ M TOL N TOL P S T LA TOL F TOL G TOL G Y A A1 AC L LB HB KK N16M 42.18 12. 8. 37. 66 213 N16L 3.5 25.16 18 42.2 11 8 11.957 7.91 36.8 275 152 318 75 235 432 N18M 299.5 249.957 35 19 5 48.18 14. 9. 42.5 746 241.5 N18L 18 48.2 11 8 13.957 8.91 42.3 295 152 352 784 26.5 476 N 2L 35.5 3.18 55.3 16.. 1. 49. 349.5 299.982 4 19 5 15 55.11 11 8 15.957 9.91 48.8 345 282 428 873 285.5 528 N 225S 4.5 35.18 45 19 5 19 6.3 14 11 18. 11. 53. N 225M 399.5 349.982 6.11 17.957 1.91 52.8 375 282 47 955 3.4.5 59 N 25S 65.3 18. 11. 58. N 25M 5.5 45.2 55 19 5 19 65.11 14 11 17.957 1.91 57.8 45 42 5 12 342.5 688 N 28S 499.5 449.98 75.3 14 11 2. 12. 67.5 43 42 536 117 399.5 724 N 28M 75.11 19.948 11.91 67.3 515 N 315S 8.3 22. 14. 71. N 315M 8.11 17 14 21.948 13.91 7.8 51 42 588 134 444.5 82 61. 55.22 66 24 6 25 599. 549.978 9.35 25. 14. 81. N 315L 9.13 17 14 57 42 655 149 53.5 82 24.948 13.91 8.8 N 355S N 355M 741. 68.25 1.35 28. 16. 9. N 355L 739. 679.975 8 24 6 28 1.13 21 16 27.948 15.89 89.9 6 42 67 1513 57 89 N 355LX 72 157 591 944 M11x32 M2x4 M24x5 2Nos-2.5" 2Nos-2" 2Nos-1.5" 2Nos-1" # ABOV 2 FRAMS MACHINS RUNNING AT 3 SYN.RPM HAV SMALLR SHAFTS AS SHOWN HR FRAM L SIZ TOL F TOL G TOL G S M L LX N 225 55.3/55.11 11 8 16./15.957 1./9.91 49./48.8 925 925 - - N 25 6.3/6.11 14 11 18./17.957 11./1.91 53./52.8 12 12 - - N 28 117 117 - - N 315 65.3/65.11 14 11 18./17.957 11./1.91 58./57.8 131 131 - - N 315 7.3/7.11 14 11 2./19.948 12./11.91 62.5/62.3 - - 146 - N 355 75.3/75.11 17 14 2./19.948 12./11.91 67.5/67.3 1473 1473 1473 153 FRAM CONCNTRICITY IN MICRON PRPNICULARITY IN MICRON RUNOUT IN MICRON SIZ NORM. CLASS NORM. CLASS SHAFT NORM. 16-28 125 125 3-5 5 5-8 6 315-355 16 16 8-12 7 N164 11

NOIS & VIBRATION LVLS NOIS LVL The noise level of the motors is restricted to the levels specified in IS 1265. Table below gives the noise level as per IS 1265 Limiting Mean Sound Power Level L in db (A) for Airborne noise emitted by Rotating lectrical Machines. w Protective nclosure IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 Rating kw (or kva) Rated Speed (rev. /min.) ABOV UPTO 96 & below 961 to 132 1321 to 19 191 to 236 2361 to 315 3151 to 375 Sound Power Level db (A) - 1.1 76 79 8 83 84 88 1.1 2.2 79 8 83 87 89 91 2.2 5.5 82 84 87 92 93 95 5.5 11 85 88 91 96 97 1 11 22 89 93 96 98 11 13 22 37 91 95 97 1 13 15 37 55 92 97 99 13 15 17 55 11 96 11 14 15 17 19 11 22 1 14 16 18 11 112 22 63 12 16 19 111 112 114 Note 1: IP 44 corresponds generally to totally enclosed fan-cooled, closed air circuit air-cooled & similar enclosure (see Is-4691) VIBRATION. The motor is said to be in state of vibration if any part of it experiences displacement in any direction. Standard motors comply with normal class of vibration depending on severity as per IS 1275. Measurement & evaluation of vibration of Rotating lectrical Machines. The limits of vibration levels are given below. VIBRATION LVLS : LIMITS OF VIBRATION SVRITY IN ROTATING LCTRICAL MACHINS MASUR IN STAT OF FR SUSPNTION * Shaft height H, mm 56 to 132 16 to 225 225 Range of speed 6 to 15 Above 15 & Above 15 & Above 15 & 6 to 15 6 to 15 Upto 3 Upto 3 Upto 3 Class of vibration Severity RMS Value of Vibration Velocity, mm/s Normal 1.8 1.8 1.8 2.8 2.8 4.5 Precision A.71.71.71 1.12 - - Precision B.45.45.45.71 - - Precision C.28.28.28.45 - - * The vibration may be determined in rigid mounting condition but the value of vibration severity shall be agreed by a special agreement between the manufacturer & the user. 12

SPCIAL SIGNS OFFR LCTRICAL MCHANICAL Non Standard Voltage And Frequency Variation Non Standard Mounting imensions uel Voltage (1:2 or 1: 3 Ratio) Special shaft xtension Triple Voltage (1: 3 : 2 Ratio) Inverter fed Supplies And AC Variable Speed ouble shaft xtension drives Multispeed Motors Upto 4 different speeds Separately Ventilated Motors nergy fficient Motors Low Vibration & Noise Level High Slip Motors Shock Grade Motors Motors For Frequent starts/stops/reversals Motors for Hazardous areas (e.g. crane duty) Torque Motors Motors For ust Laden Atmosphere High Frequency Motors Brake Motors Textiles Motors Geared Motors 1,12,16,18,24,32 Pole Motors Special Bearings like Thrust Bearings Special Performance Requirements Tacho Mounting Class H insulated Motors Non Standard Paint Shade and Painting Procedure for required ry Film Thickness Motors With Service Factor Fabricated Steel nclosure Alternate Terminal Box Position Slipring Motors with Bar-wound rotors for Special Shaft Material Frames 28 to 355 Stainless Steel/ Brass Hardware Accessories like Resistance Temperature etectors, Bearing Temperature etectors, Thermocouples, Plug & Socket Custom Size Fabricated terminal box & Terminal Arrangements. Canopy 13

TH POWR BHIN TH RIV FRAM 63 TO 355 LOW TNSION TFC INUCTION MOTORS LTM/PB/OCT4/15 INUCTION MOTORS INUCTION MOTORS VRYAY SOLUTIONS Regd Office : CG House, 6th Floor, r. Annie Besant Road, Prabhadevi, Mumbai - 4 25 Tel.: (22) 423 7777. Fax : (22) 438 2288 Manufacturing Units: Goa Works : -2/21/22/23, Tivim Industrial state, Karaswada, Bardez, Goa - 43 526. Tel.: (832) 25749, 257639 Fax: (832) 25727 Ahmednagar Works: A-6/2, M.I..C. Industrial Area, Ahmednagar - 414111 Tel.: (241) 277757, 2777372. Fax : (241) 277758 Please visit us at www.cglonline.com