DEALER DIRECTORY AND PREVENTATIVE MAINTENANCE GUIDE
THE SCANIA PARTS SOLUTIONS BROCHURE OUT NOW. Ask for a copy TODAY. 2
When you call Scania, the operator may ask you for this information. Chassis type: Chassis number: type: number: Wheelbase (mm): Registration number: Selling dealer: delivery date: Owner s name: Owner s address: Rear axle type: Rear axle ratio: Gearbox type: Contact name: Contact number: The Scania Guarantee Scania uses only authorised Scania dealers supported by Scania trained technicians using genuine Scania parts and every effort will be made to get you back on the road in the quickest possible time. The information in this booklet was correct at the time of printing. Scania Australia reserves the right to change or remove this booklet without notice. 3
SCANIA ASSISTANCE 1300 722 642 Scania Support Network Darwin Scania Owned Branch Scania and Dealer Kununurra Scania Selling Dealer Scania Dealer Broome Scania Emergency Dealer Karratha Port Hedland Newman Geraldton Kalgoorlie Kewdale Bunbury Esperance Albany 4
Cairns Townville YOU SCANIA HAVE 24/7 NATIONAL SUPPORT. Mt Isa Mackay Emerald Alice Springs Rockhampton Gladstone Bundaberg Goondiwindi Dalby Inverell Toowoomba Pinkenba Salisbury Richlands Lismore Coffs Harbour Tamworth Port Augusta Dubbo Bathurst Newcastle Port Lincoln Warracknabeal Bordertown Mt Gambier Port MacDonnell Wingfield Mildura Wagga Wagga Griffith Canberra Echuca Albury Bendigo Wangaratta Shepparton Eden Campbellfield Laverton Bairnsdale Geelong Warrnambool Dandenong Morwell Leongatha Prestons Launceston 5
SCANIA ASSISTANCE 1300 722 642 SCANIA BRANCH AND DEALER NETWORK - TRUCK AND BUS VICTORIA 6 Page Campbellfield 03 9217 3300 8 Dandenong 03 9217 3600 8 Laverton 03 9369 8666 9 Bairnsdale 03 5152 1100 9 Bendigo 03 5447 7272 10 Echuca 03 5482 3799 10 Geelong 03 5248 4466 11 Leongatha 03 5662 5266 11 Mildura 03 5023 1701 12 Morwell 03 5134 4359 12 Shepparton 03 5821 9811 13 Wangaratta 03 5722 3644 13 Warracknabeal 03 5398 1244 14 Warrnambool 0459 320 500 14 TASMANIA Launceston 03 6344 7944 15 NEW SOUTH WALES/ACT Prestons 02 9825 7900 16 Newcastle 02 9825 7940 16 Albury 02 6040 5500 17 Bathurst 02 6332 5511 17 Canberra 0429 650 147 18 Coffs Harbour 02 6652 7218 18 Dubbo 02 6882 6060 19 Eden 0409 366 999 19 Griffith 02 6962 5216 20 Inverell 02 6722 1111 20 Lismore 02 6622 0336 21 Tamworth 02 6765 5552 21 Wagga Wagga 02 9825 7900 22 Bold Scania Factory owned branches Scania Emergency Dealers QUEENSLAND Page Richlands 07 3712 8500 23 Pinkenba 07 3712 7900 23 Bundaberg 07 4154 4782 24 Cairns 07 4054 5440 24 Dalby 07 4662 5616 25 Emerald 07 4987 6733 26 Gladstone 07 4979 0056 26 Goondiwindi 07 4671 3569 28 Mackay 07 4952 3722 28 Mt Isa 0429 193 397 29 Rockhampton 07 4933 2211 29 Toowoomba 07 4633 1150 30 Townsville 07 4727 5200 31 SOUTH AUSTRALIA Wingfield 08 8406 0200 32 Bordertown 08 8752 0077 32 Mt Gambier 08 8725 7999 33 Port Augusta 08 8643 6233 33 Port Lincoln 08 8682 1753 34 NORTHERN TERRITORY Alice Springs 0437 162 796 35 Darwin 08 8932 4200 35 WESTERN AUSTRALIA Kewdale 08 9360 8500 37 Albany 08 9844 3152 37 Broome 08 9192 1330 38 Bunbury 08 9724 8444 38 Esperance 08 9071 2411 39 Geraldton 08 9935 9350 39 Kalgoorlie 08 9068 1500 40 Karratha 08 9185 2699 41 Kununurra 08 9168 2207 41 Newman 08 9177 8795 42 Port Hedland 08 9173 1115 42
SCANIA BRANCH AND DEALER NETWORK - ENGINE VICTORIA Page Campbellfield 03 9217 3300 8 Dandenong 03 9217 3600 8 Laverton 03 9369 8666 9 Bairnsdale 03 5152 1100 9 TASMANIA Launceston 03 6344 7944 15 NEW SOUTH WALES/ACT Prestons 02 9825 7900 16 Newcastle 02 9825 7940 16 Albury 02 6040 5500 17 Canberra 0429 650 147 18 Coffs Harbour 02 6652 7218 18 Dubbo 02 6882 6060 19 Eden 0409 366 999 19 Griffith 02 6962 5216 20 Lismore 02 6622 0336 21 Tamworth 02 6765 5552 21 Wagga Wagga 02 9825 7900 22 QUEENSLAND Richlands 07 3712 8500 23 Pinkenba 07 3712 7900 23 Cairns 07 4054 5440 24 Cairns 07 4035 1364 25 Dalby 07 4662 5616 25 Emerald 07 4987 6733 26 Gladstone 07 4979 0056 26 Gladstone 07 4972 3317 27 Goondiwindi 07 4671 4222 27 Goondiwindi 07 4671 3569 28 QUEENSLAND (continued) Page Mackay 07 4952 3722 28 Mt Isa 0429 193 397 29 Rockhampton 07 4933 2211 29 Salisbury 07 3277 3111 30 SOUTH AUSTRALIA Wingfield 08 8406 0200 32 Bordertown 08 8752 0077 32 Port MacDonnell 08 8738 2028 34 NORTHERN TERRITORY Darwin 08 8984 4568 36 WESTERN AUSTRALIA Kewdale 08 9360 8500 37 Albany 08 9844 3152 37 Broome 08 9192 1330 38 Bunbury 08 9724 8444 38 Esperance 08 9071 2411 39 Geraldton 0419 187 857 40 Kalgoorlie 08 9068 1500 40 Kununurra 08 9168 2207 41 7
SCANIA ASSISTANCE 1300 722 642 VICTORIA Campbellfield SCANIA AUSTRALIA 212-216 Northbourne Rd, Campbellfield, VIC, 3061. Phone: (03) 9217 3300 Fax: (03) 9305 3898 Email: csrcampbellfield@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7:30am - 6pm Saturday 7:30am - 12pm Dandenong SCANIA AUSTRALIA 2/66 Greens Rd, Dandenong South, VIC, 3175. Phone: (03) 9217 3600 Fax: (03) 9791 8575 Email: csrdandenong@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7:30am - 6 pm Saturday 7:30am 12pm 8 Dangerous Goods Genset Refrigeration Vehicle Rental Dangerous Goods Genset Refrigeration Vehicle Rental
VICTORIA Laverton SCANIA AUSTRALIA 125-129 Boundary Rd, Laverton, VIC, 3026. Phone: (03) 9369 8666 Fax: (03) 9369 8633 Email: csrlaverton@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7:30am 9pm Saturday 7:30am 12pm Bairnsdale LIVINGSTONE TRUCK REPAIRS 726 Main St, Bairnsdale, VIC, 3875. Phone: (03) 5152 1100 Fax: (03) 5152 1140 Email: admin@livingstonetrucks.com Web: livingstonetrucks.com iness Hours: Saturday by appointment Dangerous Goods Genset Refrigeration Vehicle Rental 9
SCANIA ASSISTANCE 1300 722 642 VICTORIA Bendigo TTW TRUCK AND BUS 6 Waterson Ct, Golden Square, VIC, 3555. Phone: 03 5447 7272 Email: admin@ttwtb.com.au Web: ttwtb.com.au iness Hours: Saturday 8am 12pm Echuca RICH RIVER TRUCK REPAIRS 26 Hume St, Echuca, VIC, 3564. Phone: (03) 5482 3799 Fax: (03) 5480 6092 Email: richrivertrucks@bigpond.com iness Hours: Monday to Friday 8am - 5pm Weekends by appointment 10
Geelong PJ & T MOTORS 311-319 Portarlington Rd, Moolap, VIC, 3224. Phone: (03) 5248 4466 Fax: (03) 5248 3484 Email: pjt@pjtmotors.com.au iness Hours: Monday to Friday 7am 5pm Saturday 7am 12pm Leongatha VICTORIA GIPPSLAND TRUCK MECHANICS 16 Cusack Rd, Leongatha, VIC, 3953. Phone: (03) 5662 5266 Fax: (03) 5662 5833 Email: info@gtmleongatha.com.au iness Hours: Monday to Friday 7am 5pm Saturday by appointment 11
SCANIA ASSISTANCE 1300 722 642 VICTORIA Mildura MARSHALL GROUP 335 Benetook Ave, Mildura, VIC, 3500. Phone: (03) 5023 1701 Email: courtney@ngmgroup.com.au iness Hours: Saturday 8am 12pm Morwell M & J STEWART MOTORS 111 Alexanders Rd, Morwell, VIC, 3840. Phone: (03) 5134 4359 Fax: (03) 5133 9201 Mobile: 0429 344 359 (24 hours) Email: admin@stewartmotors.com.au Web: stewartmotors.com.au iness Hours: Saturday 8am 12pm 12
Shepparton TAIG BROS 2-6 Wheeler St, Shepparton, VIC, 3630. Phone: (03) 5821 9811 Fax: (03) 5831 1021 Email: scania@taigbros.com.au Web: taigbros.com.au iness Hours: Monday to Friday 8am 5:30pm Saturday 8am 12pm or by appointment Wangaratta ROBINSON S TRUCK & COACH MAINTENANCE 45-47 Gibson St, Wangaratta, VIC, 3677. VICTORIA Phone: (03) 5722 3644 Fax: (03) 5722 3113 Email: rtcmaint@bigpond.net.au iness Hours: Towing 13
SCANIA ASSISTANCE 1300 722 642 VICTORIA Warracknabeal BRUNT TRUCK REPAIRS Corner Henty Hwy & Gardner St, Warracknabeal, VIC, 3393. Phone: (03) 5398 1244 Fax: (03) 5398 2099 Email: brunttruckrepairs@bigpond.com iness Hours: Monday to Friday 8:30am 5:30pm Weekends by appointment Warrnambool ALLANSFORD TRUCK AND TRAILER 230 Ziegler Pde, Allansford, VIC, 3277. Phone: 0459 320 500 Email: attrailer@progresstransportservices.com.au iness Hours: Saturday 8am 12pm Dangerous Goods 14
TASMANIA Launceston C & I TRANSPORT REPAIRS 430 Hobart Rd, Youngtown, TAS, 7249. Phone: (03) 6344 7944 Fax: (03) 6344 7955 Email: admin@citransportrepairs.com.au iness Hours: Weekends by appointment Dangerous Goods 15
SCANIA ASSISTANCE 1300 722 642 NEW SOUTH WALES Sydney SCANIA AUSTRALIA 16-18 Lyn Pde, Prestons, NSW, 2170. Phone: (02) 9825 7900 Fax: (02) 9825 7999 Email: nswbranch@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7am 11pm Saturday 8am 12pm Newcastle SCANIA AUSTRALIA 1 Enterprise Dr, Beresfield, NSW, 2322 Phone: (02) 9825 7940 Fax: (02) 9825 7956 Email: nswbranch@scania.com.au Web: scania.com.au iness Hours: Saturday 7am 12pm 16 Dangerous Goods Genset Refrigeration Vehicle Rental Dangerous Goods Genset Refrigeration Vehicle Rental
Albury BORDER TRUCK REPAIRS 33 Merkel St, Thurgoona, NSW, 2641. Phone: (02) 6040 5500 Fax: (02) 6025 8631 Email: bordertruck@bigpond.com Web: bordertruckrepairs.com iness Hours: Saturday 8am 12pm NEW SOUTH WALES Bathurst JOHNSON S TOWING & MECHANICAL 85 Sydney Rd, Bathurst, NSW, 2795. Phone: (02) 6332 5511 Fax: (02) 6332 5525 Email: admin@jtmc.com.au iness Hours: Saturday 8am 12pm Vehicle Washing Vehicle Washing Towing Towing 17
SCANIA ASSISTANCE 1300 722 642 NEW SOUTH WALES Canberra GLOVER MECHANICAL & BREAKDOWN 101 Underwood St, Oaks Estate, ACT, 2620. Phone: 0429 650 147 Email: glovermechanical@bigpond.com iness Hours: Saturday by appointment Coffs Harbour K & J TRUCKS 1-3 Isles Dr, North Boambee Valley, NSW, 2450. Phone: (02) 6652 7218 Fax: (02) 6652 8304 Email: service@kjtrucks.com.au Web: kjtrucks.com.au iness Hours: Saturday 8am 12pm Refrigeration Refrigeration Vehicle Washing Vehicle Washing Towing 18
Dubbo HALL S TRANSPORT REPAIRS 10 Richard Ryan Pl, Dubbo, NSW, 2830. Phone: (02) 6882 6060 Fax: (02) 6882 6090 Email: hallstrepairs@bigpond.com Web: hallstransportrepairs.com.au iness Hours: NEW SOUTH WALES/ACT Eden PHILLIP MITCHELL TRACTOR REPAIRS 1 Government Rd, Eden, NSW, 2551. Phone: 0409 366 999 Email: Phillipmitchell999@hotmail.com iness Hours: Monday to Friday 7am 6pm Saturday 7am 5pm 19
SCANIA ASSISTANCE 1300 722 642 NEW SOUTH WALES Griffith CITY TRUCK REPAIRS 1056 Bridge Rd, Griffith, NSW, 2680. Phone: (02) 6962 5216 Fax: (02) 6962 5217 Email: paul@citytruckrepairs.com iness Hours: Monday to Friday 7am 5pm Saturday 7am 12pm Inverell INVERELL TRUCK AND DIESEL REPAIRS 103 105 Ring St, Inverell, NSW, 2360. Phone: (02) 6722 1111 Email: itdr@itdr.com.au iness Hours: Weekends by appointment Dangerous Goods 20
NEW SOUTH WALES Lismore LAURIE PREDEBON TRUCK REPAIRS 42 Bruxner Hwy, South Lismore, NSW, 2480. Phone: (02) 6622 0336 Fax: (02) 6622 0316 Email: admin@lptr.com.au iness Hours: Saturday 8am 12pm Tamworth WIDELAND TRUCKS & MACHINERY 137 Gunnedah Rd, Tamworth, NSW, 2340. Phone: (02) 6765 5552 Email: jonathan.mcclelland@widelandgroup.com.au iness Hours: Saturday 8:30am 11:30am Dangerous Goods Refrigeration Refrigeration Vehicle Washing Towing 21
SCANIA ASSISTANCE 1300 722 642 NEW SOUTH WALES Wagga Wagga Please contact Scania Phone: 1300 722 642 or Scania Prestons Phone: (02) 9825 7900 22
QUEENSLAND Brisbane SCANIA AUSTRALIA 149 Archerfield Rd, Richlands, QLD, 4077. Phone: (07) 3712 8500 Fax: (07) 3375 3343 Email: richlands.service@scania.com.au richlands.parts@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7am 6pm Saturday 8am 12pm Pinkenba SCANIA AUSTRALIA 213 Holt St, Pinkenba, QLD, 4008. Phone: (07) 3712 7900 Fax: (07) 3712 7901 Email: pinkenba.service@scania.com.au pinkenba.parts@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 8am 4pm Saturday by appointment Dangerous Goods Genset Refrigeration Vehicle Rental Dangerous Goods Genset Refrigeration Vehicle Rental 23
SCANIA ASSISTANCE 1300 722 642 QUEENSLAND Bundaberg MECHWELD INDUSTRIES 1/35 Steptoe St, Bundaberg East, QLD, 4670. Phone: (07) 4154 4782 Email: mechweldindustries@gmail.com iness Hours: Monday to Friday 7am 5pm Weekends by appointment Cairns RSC DIESELS 29-31 Ponzo St, Woree, QLD, 4868. Phone: (07) 4054 5440 Fax: (07) 4054 5051 Email: info@rscdiesels.com.au Web: rscdiesels.com.au iness Hours: Dangerous Goods Refrigeration 24
QUEENSLAND Cairns MCLEOD ENGINEERING 50 Aumuller St, Portsmith, QLD, 4870. Phone: (07) 4035 1364 Fax: (07) 4035 1926 Email: admin@mcleodengineering.com.au Web: mcleodengineering.com.au iness Hours: Dalby WEST DALBY AG SALES 62 Yumborra Rd, Dalby, QLD, 4405. Phone: (07) 4662 5616 Fax: (07) 4669 6377 Email: mail@westdalbyagsales.com.au Web: westdalbyagsales.com.au iness Hours: 25
SCANIA ASSISTANCE 1300 722 642 QUEENSLAND Emerald MITCH S MECHANICAL SERVICE & REPAIR 13 McKenzie St, Emerald, QLD, 4720. Phone: (07) 4987 6733 Fax: (07) 4987 6744 Email: admin@mitchsmechanical.com.au iness Hours: Monday to Friday 8:30am 5pm Gladstone OUTCALL MECHANICAL 1 Anson Cl, Gladstone, 4680, QLD. Phone: (07) 4979 0056 Email: admin@outcallmechanical.com iness Hours: Monday to Friday 7am 6pm Weekends by appointment Refrigeration Dangerous Goods Towing 26
Gladstone CENTRAL QUEENSLAND HEAVY MAINTENANCE (CQM) 52 Chapple St, Gladstone, QLD, 4680. Phone: (07) 4972 3317 Mobile: 0419 187 900 (24 hours) Email: info@cqmotorsport.com.au iness Hours: Monday to Thursday 8am 5pm Friday 8am 2pm Weekends by appointment Goondiwindi QUEENSLAND COUNTRY LINK MOBILE MECHANICAL SERVICE 14 Boodle St, Goondiwindi, QLD, 4390. Phone: (07) 4671 4222 Fax: (07) 4671 4233 Email: country_link@bigpond.com Web: countrylinkmms.com.au iness Hours: Monday to Friday 7am 5pm Weekends by appointment 27
SCANIA ASSISTANCE 1300 722 642 QUEENSLAND Goondiwindi MACINTYRE MECHANICAL SERVICE Lot 11 Racecourse Rd, Goondiwindi, QLD, 4390. Phone: 07 4671 3569 Fax: (07) 4671 3731 Email: macintyre@bigpond.com iness Hours: Mackay MACKAY TRUCK PARTS & REPAIRS 2 Central Park Dr, Paget, QLD, 4740. Phone: (07) 4952 3722 Fax: (07) 4952 3108 Email: mkytruck@bigpond.net.au Web: mackaytruckparts.com.au iness Hours: Monday to Friday 7:30am 4:30pm Saturday Department 8am -11am Saturday Workshop by apppointment Refrigeration Dangerous Goods 28
Mt Isa JD BRADBURY 178 Duchess Rd, Mt Isa, QLD, 4825. Phone: 0429 193 397 Fax: (07) 4749 2956 Email: john.bradbury48@gmail.com iness Hours: Monday to Friday 9am 5pm Weekends by appointment Rockhampton QUEENSLAND TIBBS FLEET SERVICES 19 Somerset Rd Gracemere, QLD 4702. Phone: (07) 4933 2211 Fax: (07) 4933 4922 Email: admin@tibbsfleetservices.com.au Web: tibbsfleetservices.com.au iness Hours: Refrigeration Dangerous Goods Towing 29
SCANIA ASSISTANCE 1300 722 642 QUEENSLAND Salisbury DA.MET AUSTRALIA 42 Precision St, Salisbury, QLD, 4107. Phone: (07) 3277 3111 Fax: (07) 3274 2902 Email: info@damet.com.au Web: damet.com.au iness Hours: Saturday 8am 12pm Toowoomba WIDELAND AG & CONSTRUCTION 55-57 Carrington Rd, Toowoomba, QLD, 4350. Phone: (07) 4633 1150 Fax: (07) 4633 1872 Email: admin@widelandag.com.au Web: widelandag.com.au iness Hours: Saturday 8am 11am Refrigeration 30
Townsville HONEYCOMBES SALES & SERVICE 23-27 Langton Street Garbutt, QLD, 4814. QUEENSLAND Phone: (07) 4727 5200 Fax: (07) 4779 2757 Email: admin_tsv@honeycombes.com.au Web: honeycombes.com.au iness Hours: Saturday by appointment Towing 31
SCANIA ASSISTANCE 1300 722 642 SOUTH AUSTRALIA Adelaide SCANIA AUSTRALIA 218-234 Cormack Rd, Wingfield, SA, 5013. Phone: (08) 8406 0200 Fax: (08) 8406 0299 Email: adelaidebranch@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7:30am 6pm Saturday 8am 12pm Bordertown TATIARA TRUCK & TRAILERS Lot 4 McLellan Rd, Bordertown, SA, 5268. Phone: (08) 8752 0077 Fax: (08) 8752 1048 Email: john@tttbt.com.au Web: tatiaratruckandtrailers.com.au iness Hours: Monday to Thursday 7am 7pm Friday 7am 5:30pm Saturday 7am 12pm 32 Dangerous Goods Genset Refrigeration Vehicle Rental
Mt Gambier OGR TRUCKS 203 Jubilee Hwy West, Mt Gambier, SA, 5290. Phone: (08) 8725 7999 Fax: (08) 8724 9712 Email: admin@orgtrucks.com.au Web: ogrtrucks.com.au iness Hours: Saturday 8am 11:30am SOUTH AUSTRALIA Port Augusta EMANUELE BROS 3 Footner Rd, Port Augusta, SA, 5700. Phone: (08) 8643 6233 Email: suresh@capem.com.au Web: www.emanuelebros.com.au iness Hours: Saturday 8am 11am Vehicle Washing 33
SCANIA ASSISTANCE 1300 722 642 SOUTH AUSTRALIA Port Lincoln WEST COAST DIESEL SERVICE 32 St Andrews Tce, Port Lincoln, SA, 5606. Phone: (08) 8682 1753 Fax: (08) 8683 1750 Email: info@wcdiesel.com.au iness Hours: Weekends by appointment Port MacDonnell ASHBROOK DIESEL 14 Elizabeth St, Port MacDonnell, SA, 5291. Phone: 0417 874 540 Phone: (08) 8738 2028 Fax: (08) 8738 2158 Email: ashbrookdiesel@bigpond.com iness Hours: Weekends by appointment Vehicle Washing 34
Alice Springs TRANSPORT MAINTENANCE & ENGINEERING 7 Coulthard Crt, Alice Springs, NT, 0870. Phone: 0437 162 796 Email: manager@tmae.com.au Web: tmae.com.au iness Hours: Monday to Friday 6am 4pm Saturday 6am 1:30pm NORTHERN TERRITORY Darwin VANDERFIELD Cnr Stuart Hwy & McKinnon Rd, Pinelands, NT, 0829. Phone: (08) 8932 4200 Fax: (08) 8932 4211 Email: darwin@vanderfield.com.au Web: vanderfield.com.au iness Hours: Saturday 8am 12pm Dangerous Goods 35
SCANIA ASSISTANCE 1300 722 642 NORTHERN TERRITORY Darwin DIESEL CONTRACT SERVICES 14 Farrell Cres, Winnellie, NT, 0821. Phone: (08) 8984 4568 Fax: (08) 8984 4574 Email: dieselcontract2@bigpond.com iness Hours: Monday to Friday 8am 4.30pm 36
WESTERN AUSTRALIA Kewdale SCANIA AUSTRALIA 527-529 Abernethy Rd, Kewdale, WA, 6105. Phone: (08) 9360 8500 Fax: (08) 9353 3644 Email: csrperth@scania.com.au Web: scania.com.au iness Hours: Monday to Friday 7:30am 10:30pm Saturday 7am 12pm Albany SLR ALBANY MECHANICAL Lot 69 Pendeen Rd, Albany, WA, 6330. Phone: (08) 9844 3152 Email: accounts@slrmechanical.com.au Web: slrmechanical.com.au iness Hours: Monday to Friday 7am 5:30pm Saturday 7am 1pm Dangerous Goods Genset Refrigeration Towing 37
SCANIA ASSISTANCE 1300 722 642 WESTERN AUSTRALIA Broome BROOME DIESEL & HYDRAULIC SERVICE 4 De Castilla St, Broome, WA, 6725. Phone: (08) 9192 1330 Email: bdhs@bigpond.com iness Hours: Monday to Friday 7am 5pm Saturday 7am 12pm Bunbury SOUTH WEST ISUZU 3 Giorgi Rd, Picton, WA, 6229. Phone: (08) 9724 8444 Fax: (08) 9724 8484 Email: reception@southwestisuzu.com.au Web: southwestisuzu.com.au iness Hours: Saturday 7am 12pm Refrigeration Towing Vehicle Washing Towing 38
WESTERN AUSTRALIA Esperance KIP & STEVE S MECHANICAL REPAIRS 21 Currong St, Esperance, WA, 6450. Phone: (08) 9071 2411 Fax: (08) 9071 4199 Email: kipandsteves@westnet.com.au iness Hours: Saturday 9am 12pm Geraldton JMH MECHANICAL SERVICES 210 Goulds Rd, Narngulu, WA, 6530. Phone: (08) 9935 9350 Fax: (08) 9934 6215 Email: service@jmhmechanical.com.au Web: jmhmechanical.com.au iness Hours: Monday to Friday 6am 5:30pm Saturday 7am 1pm Dangerous Goods Refrigeration 39
SCANIA ASSISTANCE 1300 722 642 WESTERN AUSTRALIA Geraldton TAYLOR MECHANICAL & MARINE 12/5 Boyd St, Webberton, WA, 6530. Phone: 0419 187 857 Email: rob@tmm.net.au iness Hours: Monday to Friday 7:30am 5pm Weekends by appointment Kalgoorlie FLEX INDUSTRIES 60 Broadwood St, West Kalgoorlie, WA, 6430. Phone: (08) 9068 1500 Fax: (08) 9091 9501 Email: admin@flexindustries.com.au Web: flexindustries.com.au iness Hours: Monday to Friday 7am 5pm Saturday 7am 12pm Refrigeration Dangerous Goods Vehicle Washing 40
Karratha DOUBLE R EQUIPMENT REPAIRS 2493 Coolawanyah Rd, Karratha, WA, 6714. Phone: (08) 9185 2699 Fax: (08) 9185 2899 Email: karratha@dblr.com.au Web: dblr.com.au WESTERN AUSTRALIA Kununurra TOP END MOTORS 28 Bandicoot Dr, Kununurra, WA, 6743. Phone: (08) 9168 2207 Email: admin@topendmotors.net.au iness Hours: Monday to Friday 7am 4pm iness Hours: Monday to Sunday 7am 5pm Refrigeration Vehicle Washing Tyre Towing 41
SCANIA ASSISTANCE 1300 722 642 WESTERN AUSTRALIA Newman EAST PILBARA MECHANICAL 31 Laver St, Newman, WA, 6753. Phone: (08) 9177 8795 Email: admin@epmechanical.com.au Web: epmechanical.com.au iness Hours: Monday to Sunday 6am 6pm Port Hedland EARTHMOVING MAINTENANCE SOLUTIONS (EMS) Lot 843 Bell St, Port Hedland, WA, 6721. Phone: (08) 9173 1115 Email: admin@emsl.com.au Web: emsl.com.au iness Hours: Monday to Friday 6:30am 5pm Saturday 6:30am 12pm Refrigeration Vehicle Washing 42
When you need an extra vehicle in the short-term such as to fulfil an unexpected customer assignment or to cover seasonal or unscheduled peaks in vehicle demand Scania Rental is the perfect transport solution. For more information please contact Scania on 1300 391 744. 43
SCANIA ASSISTANCE 1300 722 642 PREVENTATIVE MAINTENANCE. THE KEY TO UPTIME. At Scania, we understand the importance of keeping your truck, bus or coach on the road and minimising the time it spends in the workshop. Therefore we always review our preventative maintenance recommendations to achieve the best outcome for you. This includes capitalising on the product improvements that Scania continually introduces. Scania understands that unscheduled maintenance and repairs add unwanted costs to operators. When a truck, bus or coach is off the road, there are not only the continuing overheads of repayments and wages, but there are also the on-costs of replacement vehicles, call-outs and towing. And, of course, there is the cost to your goodwill and the potential damage to your relationship with your customer when the freight can t be delivered on time. Which items need attention? Scania has produced a list of some of the items we suggest be replaced or serviced as part of a preventative maintenance program that will maximise your fleet availability. These recommendations are based on the experience of Scania s after sales organisation the people who make up Australia s only nationwide manufacturer owned service network. Scania technicians are trained specifically on Scania so there s a wealth of knowledge that s gone into producing these suggestions. If you regularly have your vehicle serviced by your local Scania dealer, preventative maintenance can be part of the service. You will be advised if an item is worn and needs replacement, repair or a rebuild as part of your servicing regime. If you are not a regular customer, feel free to discuss the effect your application may have on the suggested schedule. And remember, in some cases a component may fail sooner than the suggested interval, no matter what your application. Some parts may well last longer it all depends on the component load cycle and the vehicle s application. How Scania has come up with its preventative maintenance suggestions. All Scania s preventative maintenance recommendations are based on Scania vehicles operating in a cross-section of environments, from short-haul buses to long-haul road train prime movers. Preventative service intervals are affected by a range of factors. These include: Gross weights. The higher your gross weight, the harder your vehicle works. Speed. Vehicles operating at highway speeds will often experience higher wear on engine and driveline components. Temperatures. Vehicles operating in higher temperatures may suffer higher wear rates, particularly when operating at high gross weights. Road surface. Vehicles operating offroad or on sub-standard bitumen may see greater wear of cab and axle air suspension components. Duty cycle. Vehicles operating in stopstart applications or heavy traffic may experience higher clutch, starter motor, turbocharger and transmission wear. 44
FINDING YOUR CORRECT OPERATION TYPE. The following tables are for guidance only. All recommendations are subject to application. Regular monitoring by your local Scania dealer ensures the best possible life expectancy from Scania components. City bus Local charter bus Long distance coach Construction Distribution Metropolitan/intrastate Long distance Heavy-duty long distance Special applications High frequency stop-start operations in city traffic. Low-frequency stop-start operations with low daily usage. Vehicles doing over 120,000km per year where normal trip distances are over 200km. These vehicles generally travel interstate or between major centres within the state. Vehicles regularly running into quarries or construction sites generally doing less than 150,000km per year. Examples include tip trucks and concrete agitators. Vehicles running in urban environments with many stops and starts generally doing less than 120,000km per year. Examples include urban container cartage. Vehicles doing many trips in urban environments but also regularly doing country deliveries with annual kilometres over 120,000km per year. These vehicles have a maximum GCM of 45 tonnes. Examples include supermarket distribution. Vehicles doing over 120,000km per year where normal trip distances are over 200km. These vehicles generally travel interstate or between major centres within the state. They have a load factor less than 25 per cent of operating time at greater than 70 per cent of full load. Examples include linehaul operations with a single trailer, light B-double operations. Vehicles doing over 120,000km per year where normal trip distances are over 200km. These vehicles generally travel interstate or between major centres within the state with load factors more than 25 per cent of operating time at greater than 70 per cent of full load. Examples include road trains and B-double operations in hilly terrain. s under 460HP may fit this category in lighter B-Double applications. Vehicles that do not suit any of the above categories. Speak to your Scania representative for the preventative maintenance schedule to suit your needs. 45
SCANIA ASSISTANCE 1300 722 642 PREVENTATIVE MAINTENANCE GUIDE P-G-R TRUCK OPERATION TYPE AND DESCRIPTION Operation type 1 - Long distance transport Typical Single long distance operation <45 tonnes Idling and power take-off operation is less than 25% of the total operating time. Average speed is typically over 60 km/h Operation type 2 - Heavy long distance transport up to 68 tonnes Typical Bdouble long distance operation 45-68 tonnes Like operation type 1, but with higher load on powertrain and chassis due to the higher gross weight or hilly topography Operation type 3 - (Off-road) Construction operations There are high or extremely high levels of the climate factors dust, dirt AND Total idling and power take-off operation is more than 25% of the total operating time Operation type 4 - Distribution Total idling and power take-off operation is more than 25% of the total operating time OR Traffic is extremely heavy, i.e. more than 250 stops or major decelerations per 100 km. Average speed is typically below 40 km/h Operation type 5 - Heavy long distance 68-130 tonnes Heavy operations long distance between 68-130 tonnes Like operation type 2, but with higher load on powertrain and chassis due to the higher gross laden weight. PLEASE NOTE: Operation types are given as general applications. A regular analysis of the vehicles stored operational data will give an accurate determination of the vehicles application and service intervals. ** maximum engine oil drain intervals when loaded less than 60% of the time *** maximum engine oil drain interval when loaded more than 60% of the time 730hp engines must run reduced oil drain interval in all application using LDF3 oil only. Oil drain interval recommendations are to suit Euro4, 5 &6 diesel engines. Please contact Scania Australia for more information. (May Not Be Valid for all Scania Types) ** maximum L service interval when loaded less than 60% of the time *** maximum L service interval when loaded more than 60% of the time Oil drains must be halved if gear oil is not STO1 approved. Oil drain must be carried out at least once every 2 years if stated km for application type are not met. For Automatic gearbox oil drain intervals follow instructions in the latest issue Workshop Manual 00:16-01 This document is a guide only and any recommendations are general for the listed applications. The estimated life of components is based on data collated from vehicles operating in Australian conditions. The driving style, travel route, vehicle weight and quality of maintenance will affect the estimated service life of each component. The estimated service life of components does not imply any warranty or costs to be accepted by Scania Australia Pty Ltd, if the service life is not achieved. 46
RECOMMENDED PREVENTATIVE MAINTENANCE ALL P-G-R TRUCK Area Component Action Recommendation (V8 only) Oil Cooler Replace O rings and seals 480,000km, (7200 hrs) Cooling system Cooling system Idler pulleys, belt & tensioners HPI/PDE engines Idler pulleys, belts & tensioners XPI engines Replace Replace 480,000km, (7200 hrs) or 2 years* 240,000km, (3600hrs) or 2 years* Cooling system Water pump Replace 600,000km, (9000hrs) or 4 years Cooling system Coolant Replace 600,000km, (9000hrs) or 4 years Cooling system Radiator & Intercooler External clean Annually Scania Gearbox Shift / OPC cylinders Replace O rings 750,000km, (11250hrs) Hubs and Wheels Drive/Tag axle wheel bearings Clean and Re-pack 600,000km, (9000hrs) Electrical Batteries Replace 2 years Cab Air Conditioning 2 years RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE OPERATION TYPE 1 - LONG DISTANCE TRANSPORT Area Component Action Recommendation Turbocharger (excluding VGT) Replace 750,000km, (11250hrs) Fuel and exhaust Unit Injectors (PDE) or Replace 750,000km, (11250hrs) Prop / Tail shaft Universal joints Replace 800,000km, (12000hrs)* Brakes Compressor Replace 800,000km, (12000hrs) Electrical Starter motor Replace 1,000,000km or 4 years RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE OPERATION TYPE 2 - HEAVY LONG DISTANCE TRANSPORT UP TO 68 TONNES Area Component Action Recommendation Turbocharger(excluding VGT) Replace 600,000km, (9000hrs) Fuel and Exhaust Unit Injectors (PDE) or Replace 600,000km, (9000hrs) Prop / Tail shaft Universal joints Replace 750,000km, (11250hrs)* Brakes Compressor Replace 800,000km, (12000hrs) Electrical Starter motor Replace 1,000,000km or 4 years #RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE OPERATION TYPE 3 - (OFF-ROAD) CONSTRUCTION OPERATIONS, OPERATION TYPE 4 - DISTRIBUTION AND OPERATION TYPE 5 - HEAVY LONG DISTANCE 68-130 TONNES Area Component Action Recommendation Turbocharger (excluding VGT) Replace 500,000km, (7500hrs) Fuel and Exhaust Unit Injectors (PDE) or Replace 500,000km, (7500hrs) Prop / Tail shaft Universal joints Replace 500,000km, (7500hrs)* Brakes Compressor Replace 700,000km, (10500hrs) Electrical Starter motor Replace 4 years reduce to 3 years with Increased Duty Cycle * The condition of individual items should be assessed as part of a routine service program 47
SCANIA ASSISTANCE 1300 722 642 PREVENTATIVE MAINTENANCE GUIDE K-N BUS OPERATION TYPE AND DESCRIPTION Operation type 1 - Long s Long distance services. For example a coach operating between major cities with fewer than 20 stops per 100km Idle operation is less that 25% of total operating time Operation type 2 - Suburban and Regular s Regular services between cities or towns including shorter chartered services with 20-50 stops or major deceleration per 100km Operation type 3 - City s Regular city services with more than 50 stops or major deceleration per 100km PLEASE NOTE: Operation types are given as general applications. A regular analysis of the vehicles stored operational data will give an accurate determination of the vehicles application and service intervals oil drain intervals are considered as maximum for LDF3 engine oil. Intervals are suitable for Euro4, 5 & 6 diesel engines oil drain must be carried out at least once per year if stated km for application are not met. Please contact Scania Australia for more information. (May Not Be Valid for all Scania Types) Oil drains must be halved if gear oil is not STO1 approved. Oil drain must be carried out at least once every 2 years if stated km for application type are not met. For Automatic gearbox oil drain intervals follow instruction in the latest issue Workshop Manual 00:21-50 This document is a guide only and any recommendations are general for the listed applications. The estimated life of components is based on data collated from vehicles operating in Australian conditions. The driving style, travel route, vehicle weight and quality of maintenance will affect the estimated service life of each component. The estimated service life of components does not imply any warranty or costs to be accepted by Scania Australia Pty Ltd, if the service life is not achieved. 48
RECOMMENDED PREVENTATIVE MAINTENANCE ALL K-N BUS Area Component Action Recommendation Cooling system Water pump Replace 600,000km or 4 years Cooling system Coolant Replace 600,000km or 4 years Cooling system Radiator and Intercooler External clean Annually Scania Gearbox Shift / OPC cylinders Replace O rings 750,000km Hubs and Wheels Drive/Tag axle wheel bearings Clean and Re-pack 600,000km RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE OPERATION TYPE 1 - LONG DISTANCE SERVICES Area Component Action Recommendation Turbocharger (excluding VGT) Replace 900,000km Cooling system Idler pulleys, belts and tensioners Replace 360,000km or 2 years* Fuel and Exhaust Unit Injectors (PDE) or Replace 600,000km Prop / Tail shaft Universal joints Replace 750,000km* Brakes Compressor Replace 700,000km Electrical Starter motor Replace 600,000km RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE OPERATION TYPE 2 - SUBURBAN & REGULAR SERVICES Area Component Action Recommendation Turbocharger (excluding VGT) Replace 400,000km Cooling system Idler pulleys, belts and tensioners Replace 180,000km or 2 years* Fuel & Exhaust Unit Injectors (PDE) or Replace 400,000km Prop / Tail shaft Universal joints Replace 500,000km* Brakes Compressor Replace 400,000km Electrical Starter motor Replace 4 years RECOMMENDED PREVENTATIVE MAINTENANCE SCHEDULE OPERATION TYPE 3 - CITY BUS SERVICES Area Component Action Recommendation Turbocharger(excluding VGT) Replace 300,000km Cooling system Idler pulleys, belts and tensioners Replace 180,000km or 2 years* Fuel & Exhaust Unit Injectors (PDE) or Replace 400,000km Prop / Tail shaft Universal joints Replace 500,000km* Brakes Compressor Replace 360,000km Electrical Starter motor Replace 4 years Body Body Rubber bush for articulation attachment in articulated bus h securing articulation bellows in frame Replace Replace * The condition of individual items should be assessed as part of a routine service program 400,000km 400,000km 49
DETAILS MATTER Scania Driver & Connected s offers solutions that connect you with your vehicles and drivers. Scania Connected s with Scania Fleet Management solutions help you identify and focus on key details needed to increase the productivity and reduce the cost of your fleet. Scania Driver Development provides tailor-made solutions based on your business need, designed to deliver real and sustainable benefits. Scania fleet management Take Control of Your Fleet And Lower Your CostS Monitoring Package Control Package Scania Fleet Management consists of two service packages: Monitoring and Control. Both service packages offer quick access to fleet overviews, help you make decisions that cut fuel consumption, and identify vehicles that are being driven optimally. For more information on how we can assist your business, contact Scania Driver & Connected s on driver.services@scania.com.au 50
Scania Driver Development Sustainable Benefits to Your iness Scania Driver Training Scania Optimise Scania Driver Development comprises two solutions: Driver Training and Optimise. Both have the focus to get the best out of your drivers and achieve the best out of your vehicles. Both the Driver Training and Optimise solutions work with clients to reduce costs by offering training & coaching to drivers, to continuously improve their performance. 51
REPAIR & MAINTENANCE AGREEMENTS OPERATING EFFICIENCY WITH PEACE-OF-MIND n Flexible Agreements n Increased Profitability n Control your costs n Maximise your Uptime Pick up a brochure at your Scania branch or goto scania.com.au for more information 52
MAINTENANCE AGREEMENT KEY FEATURES n Safety inspections n Scheduled servicing n National service scheduling - Flexible or Periodic n Fleet management system - Monitoring Package on new vehicles MAINTENANCE + PREVENTATIVE AGREEMENT KEY FEATURES n Safety inspections n Scheduled servicing n National service scheduling - Flexible or Periodic n Fleet management system - Monitoring Package on new vehicles n Preventative maintenance Items MAINTENANCE + DRIVELINE AGREEMENT KEY FEATURES n Safety inspections n Scheduled servicing n National service scheduling - Flexible or Periodic n Fleet management system - Monitoring Package on new vehicles n Preventative Maintenance Items n Extended Driveline coverage - Wear and tear and failure REPAIR & MAINTENANCE AGREEMENT KEY FEATURES n Safety inspections n Scheduled servicing n National service scheduling - Flexible or Periodic n Fleet management system - Monitoring Package on new vehicles n Preventative maintenance items n Full coverage - Wear and tear repairs and failures n Max24 - on road guarantee 53
SCANIA REVOLUTIONISES TRUCK MAINTENANCE WITH FLEXIBLE PLANS. MAINTENANCE TAILORED FOR YOUR NEEDS. Increased Profitability Maximise your Uptime Tailored plan via Operating data Servicing when required A truly tailored maintenance programme, Scania truck maintenance intervals and service requirements are now determined by using real-time operating data from each truck. This means that instead of service intervals based on set kilometres, and standard predefined service sheets, vehicles are called in for service when the operating data indicates that maintenance is needed. This means the vehicle receives exactly the maintenance it needs and, in most cases, delivers increased uptime by spending less time at the workshop. Scania Flexible Plans will take maintenance to an entirely new level. This new technology continuously monitors the vehicle s operating data which makes it possible to determine with a great deal of precision when various maintenance operations need to be carried out. A Scania service agreement means that the operator does not have to keep track of when the vehicle needs to be serviced; instead he or she is contacted by Scania when it is time for a tailored service and informed how long the vehicle will be needed. Scania Australia has approximately 2000 vehicles connected via the Scania Communicator that can potentially begin using flexible maintenance plans. Many more vehicles are prepared and can be retrofitted with the required hardware to take advantage of this leap forward in tailored vehicle maintenance plans. Note: 30 individual maintenance modules available 54
REDUCE YOUR COSTS FURTHER WITH DRIVERS REWARD With Scania service agreements already increasing resale values, being able to produce an Excellent or Elite driver status throughout the agreement term may see this value enhanced even more. With the driver having a major impact on the fuel burn and wear and tear on the truck, a service agreement with Scania Flexible Plans will reward a well driven truck with not only an increase in uptime, but a reduction in monthly service agreement invoices. DRIVER SCORE CPK (Cents per Kilometre) CPK Review 6.97 6.45 6.14 5% rebate of annual invoice <45% 45% 54% 55% 70% 71% 85% >85% Well Below Average Below Average Good Excellent Elite The cents per kilometre (CPK) figures featured above are for illustrative purposes only. * Periodic maintenance at set intervals is still available to customers or for driving patterns for which this option is most suitable. 55
SCANIA DEALER DIRECTORY MORE INFORMATION For further information please contact your nearest Scania Branch DEALER SUPPORT CENTRE 212 216 Northbourne Rd Campbellfield, 3061 Tel: (03) 9217 3300 SCANIA VIC (Campbellfield) 212 216 Northbourne Rd Campbellfield, 3061 Tel: (03) 9217 3300 SCANIA VIC (Dandenong) 2/66 Greens Rd Dandenong South, 3175 Tel: (03) 9217 3600 SCANIA NSW (Prestons) 16 18 Lyn Pde Prestons, 2170 Tel: (02) 9825 7900 SCANIA NSW (Newcastle) 1 Enterprise Dve Beresfield, 2322 Tel: (02) 9825 7940 SCANIA QLD (Richlands) 149 Archerfield Rd Richlands, 4077 Tel: (07) 3712 8500 SCANIA SA (Wingfield) 218 234 Cormack Rd Wingfield, 5013 Tel: (08) 8406 0200 SCANIA WA (Kewdale) 527 529 Abernethy Rd Kewdale, 6105 Tel: (08) 9360 8500 SAU2018-DealerDirectory SCANIA VIC (Laverton) 125 129 Boundary Rd Laverton, 3026 Tel: (03) 9369 8666 SCANIA QLD (Pinkenba) 213 Holt St Pinkenba, 4008 Tel: (07) 3712 7900