Forced Safety Key Extraction Interlock Control Isolation Hygienic Double Door Interlock Door Locks Overview of new products now available in the DM2E - DMS2E DMSK2 Mini Solenoid Controlled Key Switch (back of board) Mini Solenoid Controlled Key Switch (in enclosure) S-Key switch WP (water proof) MSS MSSR S-WP Key Switch (in metal enclosure) mgard to amgardpro Link Adaptor Control Isolation Accessories SR LOK LINK www.fortressinterlocks.com
DM2E, DMS2E Forced Safety Key Extraction Door Interlock Power and Control Isolation Key Exchange Door Locks and Actuators» Forced Safety Key Extraction Door Interlock DM2E-CLIN* DMS2E-CLSS *Note - Head unit will remain stainless steel with dust cap. Forced Safety Key Extraction Door Interlock No product handing issues: 4 head rotation angles with an adjustment of 360 at 90 increments with +/-5 fine adjustment Two actuator entry points Stainless Steel Construction head unit Door will not open until safety key has been removed. Any combination of isolation/access keys possible Sequential or Non-sequential key operation Simply add modules to existing configurations Tamper resistant head mechanism Choice of actuator XMS modules can be added for system expansion Dust caps supplied as standard on head unit mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO 13849-1), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Housing Materials Body DMS Head Internals DM DMS Key Full Stainless Steel Full Stainless Steel Full Stainless Steel Die-cast zinc body with stainless operating mechanism (selected seperatly) Full Stainless Steel Stainless Steel (purchased seperately) Article Codes Nº of Locks Full Stainless Steel Part Nº 2» 5 DM2E» DM5E DMS2E» DMS5E Lock & Key Type Keys must be specified separately Actuator Type Actuator type must be specified separately Product Dimension A Dimension B Dimension C Overall length Nº of slotted holes Nº of CL locks DM2E 154.60 2 2 DM3E 211.75 4 3 DM4E 268.90 6 4 DM5E 326.05 8 5 Dimensional Drawing M_DM2E_V1.0_OCT12
DMSK Hygienic, Double Door Interlock Power and Control Isolation Key Exchange Door Locks and Actuators» Double Door Interlock DMSK2 DMS1 Double Door Interlock The DMSK2 is a robust interlock intended for hygienic areas and suitable for all types of doors. Minimal design to reduce dirt traps. No product handing issues: 4 head rotation angles with an adjustment of 360 at 90 increments. Two actuator entry points Full stainless steel assembly Tamper resistant head mechanism Choice of actuator mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO 13849-1), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Article Codes Nº of Locks (Full Stainless Steel) Part Nº 2 DMSK2 Lock Type Key and lock types must be specified separately Actuator Type Actuator type must be specified separately Housing Materials Body Head Internals Key Full stainless steel Full stainless steel Full stainless steel CLS or MLS lock types are full stainless steel Stainless steel (selected separately) Dimensional Drawing M_DS_E_DMSK2_V1.0_DEC11
Power & Control Isolation Mini Solenoid Controlled Key Switch (back of board) The mini SS unit is used where the key needs to remain trapped until an electrical signal has been received, where space is limited. Back of Board (BOB) - This unit can be fixed behind a machine control panel. Weatherproof (BOB) - This unit is IP67 rated. Switch Approvals Mini Solenoid Controlled Key Switch Fits within a 65mm(w) x 95mm(L) x 55mm(H) envelope. Suitable for machines with a rundown cycle. The standard sequence is: Solenoid de-energised - Key trapped, Solenoid energised - Key free (other sequences available upon request). 2 x NC 3A Key monitoring contacts. 2 x NC 3A Solenoid monitoring contacts. Mounting Plate B10d 5,000,000 Solenoid Power Rating Solenoid Voltages Zinc plated mild steel Die-cast zinc body with stainless steel 12W (current at Nominal 24V DC = 500mA) 24V DC 48V DC 110V AC / 110V DC 230V AC Part No. / Ordering Information No. of Locks Part No. 1 MSS1 / MSS1WP Lock Types CL/ML Solenoid Voltage 24V DC D024 48V DC D048 110V AC / 110V DC A110 / D110 230V AC A230 * Key and lock types must be specified seperately Dimensional Drawing - MSS (BOB) mss
Power & Control Isolation Mini Solenoid Controlled Key Switch (back of board) Dimensional Drawing - MSS (BOB) - Weatherproof Version
Power & Control Isolation Mini Solenoid Controlled Key Switch in enclosure The mini SSR unit is used where the key needs to remain trapped until an electrical signal has been received and where space is limited. When the signal is received the push button illuminates. On pressing the illuminated push button the key is released. The solenoid release push button can be laser marked upon request with 2 lines of text containing no more than 8 characters per line. Switch Approvals Mini Solenoid Controlled Key Switch IP67 Laser marking available on push button on request. Suitable for machines with a rundown cycle. The standard sequence is: Solenoid de-energised - Key trapped, Solenoid energised - Key free (other sequences available upon request). 2 x NC 3A Key monitoring contacts. 2 x NC 3A Solenoid monitoring contacts. Enclosure B10d 5,000,000 Solenoid Power Rating Solenoid Voltages Painted die-cast zinc Die-cast zinc body with stainless steel 12W (current at Nominal 24V DC = 500mA) 24V DC 48V DC 110V AC / 110V DC 230V AC Part No. / Ordering Information No. of Locks Part No. 1 MSSR1 Lock Types CL/ML Solenoid Voltage 24V DC D024 48V DC D048 110V AC / 110V DC A110 / D110 230V AC A230 * Key and lock types must be specified seperately Dimensional Drawing - MSSR mssr
S Key Switch WP (water proof) Power and Control Isolation Key Exchange Door Locks and Actuators» Key Switch WP (water proof) S BMS Key Switch WP (water proof) Safety Data The S unit is suitable for isolation or switching current and may be used to isolate power to machinery. IP Rating IP65 IP66 IP67 S-CLIS-A02022WP Seal system is rated to IP67 Direct drive operation - positively opens contacts The standard sequence is: Key trapped - Power on, Key free - Power off (other sequences can be specified) Special switch ratings and/or contact arrangements available on request Standards Certifications EN60947-3:2009 EN1088:1996 EN13849-1:2008 EN13849-2:2012 EN62061:2005 CE marked for all applicable directives Category Cat. 4, PLe (EN/ISO 13849-1) and SIL3 (EN/IEC 62061) B10d 5,000,000 Functional safety data DC High 99% (with correct monitoring) mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO 13849-1), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Mounting Plate Key Plastic injection moulding with integrated O-Ring seal. Die-cast zinc body (optional stainless steel) operating mechanism (selected separately) Stainless steel (selected separately) Article Codes Mounting Part Nº Back of Board Lock Type CL Lock no dustcover CL Lock with stainless steel dustcover Stainless Steel CL Lock with Stainless steel dustcover ML Lock no dustcover ML Lock with stainless steel dustcover Stainless Steel ML Lock with Stainless steel dustcover S CLIN CLIS CLSS MLIN MLIS MLSS Switch Current Part Nº 20A 32A 63A A020 A032 A063 Switch Contacts Part Nº 4NO/0NC 40 2NO/2NC 22 Dimensional Drawing - S-CLIS-A02022WP Type Water proof Wiring Diagram - Key Free WP 4NO/0NC 1 2 3 4 5 6 7 8 2NO/2NC 1 2 3 4 5 6 7 8 M_DS_E_S_WP_V1.0_MAY13
SR Key Switch (in metal enclosure) Power and Control Isolation Key Exchange Door Locks and Actuators» Key Switch (in metal enclosure) SR BMS Key Switch (in metal enclosure) The SR unit is suitable for isolation or switching current and may be used to isolate power to machinery. Direct drive operation - positively opens contacts The standard sequence is: Key trapped - Power on, Key free - Power off (other sequences can be specified) Special switch ratings and/or contact arrangements available on request Robust metal enclosure IP 65/66/67 rated Safety Data Standards Certifications EN60947-3:2009 EN1088:1996 EN13849-1:2008 EN13849-2:2012 EN62061:2005 CE marked for all applicable directives Category Cat. 4, PLe (EN/ISO 13849-1) and SIL3 (EN/IEC 62061) Functional safety data B10d 5,000,000 DC High 99% (with correct monitoring) mgard is the ultimate range of robust mechanical trapped key products. Trapped key technology offers purely mechanical access locks (removing the need for expensive wiring). mgard offers an extensive variety of modular interlocking solutions. Suitable for use in applications up to SIL3 (EN/IEC 62061),Category 4 and PLe (EN/ISO 13849-1), mgard is ideal for use in harsh environments and is tested to 1,000,000 operations. Article Codes Mounting Part Nº In enclosure (IP65/66/67) SR Lock Type Key and lock types must be specified separately Switch Current Part Nº 20A A020 Enclosure Key Ingress Protection Dimensional Drawing Die-cast zinc Die-cast zinc body with stainless steel operating mechanism (selected separately) Stainless steel (selected separately) IP65/66/67 Switch Contacts Part Nº 4NO/0NC 40 2NO/2NC 22 Wiring Diagram 4NO/0NC 1 2 3 4 5 6 7 8 2NO/2NC 1 2 3 4 5 6 7 8 M_DS_E_SR_V1.0_APR13
Adaptor LOK Link - mgard to amgardpro Link Adaptor This module allows mgard components to be linked directly to prolok and prostop units in the amgardpro range, and in doing so adds a directly attached safety switch and direct solenoid control option to the. LOK Link - mgard to amgardpro Link Adaptor Materials All Stainless Steel Possible Configurations Electrical indication of bolt position (BM to prostop). Full stainless steel head and locks for amgardpro range (DMS to prolok or prostop). Head for small radius doors (DM to prolok or prostop). Stainless steel head and locks for explosion proof environments (DMS to prostopux or prostopex). IP65/6/7 monitored exchange box (XM_ to prostop). IP65/6/7 Solenoid controlled exchange box (XM_ to prolok). Solenoid controlled bolt lock (BM to prolok). Part No. / Ordering Information Part No. Description Link mgard to amgardpro Link Adaptor Adaptor Dimensional Drawing BM-CLIN-LINK-ST401 BM1-CLIN-LINK-SL411 XM4-CLIN-LINK-ST401 DMS1-CLSN-LINK-EX401 DM2-CLIN-LINK-SL411